Commit graph

1,169,205 commits

Author SHA1 Message Date
Tobias Waldekranz
670bb80f81 net: dsa: mv88e6xxx: Mark chips with undocumented EDSA tag support
All devices are capable of using regular DSA tags. Support for
Ethertyped DSA tags sort into three categories:

1. No support. Older chips fall into this category.

2. Full support. Datasheet explicitly supports configuring the CPU
   port to receive FORWARDs with a DSA tag.

3. Undocumented support. Datasheet lists the configuration from
   category 2 as "reserved for future use", but does empirically
   behave like a category 2 device.

So, instead of listing the one true protocol that should be used by a
particular chip, specify the level of support for EDSA (support for
regular DSA is implicit on all chips). As before, we use EDSA for all
chips that fully supports it.

In upcoming changes, we will use this information to support
dynamically changing the tag protocol.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:51:19 -07:00
David S. Miller
08322284c1 Another set of updates, all over the map:
* set sk_pacing_shift for 802.3->802.11 encap offload
  * some monitor support for 802.11->802.3 decap offload
  * HE (802.11ax) spec updates
  * userspace API for TDLS HE support
  * along with various other small features, cleanups and
    fixups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAmB+4y8ACgkQB8qZga/f
 l8SiGw/9Fz3XETnNDYMvyY7ppmWzZ6vofRq307YJiCz1fszEKqwyyzMQOrHA9tg2
 Nasl711egWlVyHTBCN+VCSaTQUjkODsK/5t4XWoxdJ0J3lZkgryVGBJljpl+k4A6
 11qpvwUnO1WCmt0s49V2yU/jWgZ9itHfu9dosu/YIq+NfXUVA7ylKmP3gqfmcCeV
 631z5AnM8/9N8QVMpnk5F2fE57WUXbA+KdVsw0LXMmjXYSsQ9MyTBX/lRDVcaMWV
 7cOtHekkzD0MVfsOoBVvsJl+bybBgEPOfZn2Kt22Rh4JzAch/uUhwRQGzsGxcR3p
 D8W9BABXCU8C5mhP8gcKlOSuH3h7ydKKqrXXNeRO+y5hymOtUSGJxia93m+uQ8qC
 97wootP3cb97/dEzv5cWqw5Pa39uEsny6mQqueD5WcMI9imL98HEo3hrZElbctx8
 s9ZE37WAlZ0zw+cGIsmElZfE2qMqEhjxF3mGFcpXLkk9/Y/1jmypYopkBLJh6KcS
 mIfwk9qWgADbPT5df1A/1388lMkjBRcQGc1SriYxy/olvb70mD8IPPiDSD2kULDt
 Sq2frnOdvjW0Q5DB6jBKzdMudAxY3WP5MlcGDy1iYwEbY6s4lPfQXG48joJpRQFG
 I3zPM6Z+Pimx7vcTd5a+IUyKvDoF+DtxiOu8DGKYT2M5tv3/tpI=
 =b0NQ
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-net-next-2021-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Another set of updates, all over the map:
 * set sk_pacing_shift for 802.3->802.11 encap offload
 * some monitor support for 802.11->802.3 decap offload
 * HE (802.11ax) spec updates
 * userspace API for TDLS HE support
 * along with various other small features, cleanups and
   fixups
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:44:04 -07:00
David S. Miller
c9ad20573a Merge branch 'mlxsw-refactor-qdisc-offload'
Petr Machata says:

====================
mlxsw: Refactor qdisc offload

Currently, mlxsw admits for offload a suitable root qdisc, and its
children. Thus up to two levels of hierarchy are offloaded. Often, this is
enough: one can configure TCs with RED and TCs with a shaper, and can even
see counters for each TC by looking at a qdisc at a sufficiently shallow
position.

While simple, the system has obvious shortcomings. It is not possible to
configure both RED and shaping on one TC. It is not possible to place a
PRIO below root TBF, which would then be offloaded as port shaper. FIFOs
are only offloaded at root or directly below, which is confusing to users,
because RED and TBF of course have their own FIFO.

This patchset is a step towards the end goal of allowing more comprehensive
qdisc tree offload and cleans up the qdisc offload code.

- Patches #1-#4 contain small cleanups.

- Up until now, since mlxsw offloaded only a very simple qdisc
  configurations, basically all bookkeeping was done using one container
  for the root qdisc, and 8 containers for its children. Patches #5, #6, #8
  and #9 gradually introduce a more dynamic structure, where parent-child
  relationships are tracked directly at qdiscs, instead of being implicit.

- This tree management assumes only one qdisc is created at a time. In FIFO
  handlers, this condition was enforced simply by asserting RTNL lock. But
  instead of furthering this RTNL dependence, patch #7 converts the whole
  qdisc offload logic to a per-port mutex.

- Patch #10 adds a selftest.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:43:13 -07:00
Petr Machata
0a4d0cb1a3 selftests: mlxsw: sch_red_ets: Test proper counter cleaning in ETS
There was a bug introduced during the rework which cause non-zero backlog
being stuck at ETS. Introduce a selftest that would have caught the issue
earlier.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:43:13 -07:00
Petr Machata
7de85b0431 mlxsw: spectrum_qdisc: Index future FIFOs by band number
mlxsw used to hold an array of qdiscs indexed by the TC number. In the
previous patch, it was changed to allocate child qdiscs dynamically, and
they are now indexed by band number. Follow suit with the array of future
FIFOs.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:43:13 -07:00
Petr Machata
5cbd960253 mlxsw: spectrum_qdisc: Allocate child qdiscs dynamically
Instead of keeping qdiscs in globally-preallocated arrays, introduce a
per-qdisc-kind value num_classes, and then allocate the necessary child
qdiscs (if any) based on that value. Since now dynamic allocation is
involved, mlxsw_sp_qdisc_replace() gets messy enough that it is worth it to
split it to two cases: a new qdisc allocation and a change of existing
qdisc. (Note that the change also includes what TC formally calls replace,
if the qdisc kind is the same.)

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:43:13 -07:00
Petr Machata
cff99e2045 mlxsw: spectrum_qdisc: Guard all qdisc accesses with a lock
The FIFO handler currently guards accesses to the future FIFO tracking by
asserting RTNL. In the future, the changes to the qdisc state will be more
thorough, so other qdiscs will need this guarding is as well. In order
to not further the RTNL infestation, instead convert to a custom lock that
will guard accesses to the qdisc state.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:43:13 -07:00
Petr Machata
51d52ed955 mlxsw: spectrum_qdisc: Track children per qdisc
mlxsw currently allows a two-level structure of qdiscs: the root and
possibly a number of children. In order to support offloading more general
qdisc trees, introduce to struct mlxsw_sp_qdisc a pointer to child qdiscs.
Refer to the child qdiscs through this pointer, instead of going through
the tclass_qdiscs in qdisc_state. Additionally introduce a field
num_classes, which holds number of given qdisc's children.

Also introduce a generic function for walking qdisc trees. Rewrite
mlxsw_sp_qdisc_find() and _find_by_handle() to use the generic walker.

For now, keep the qdisc_state.tclass_qdisc, and just point root_qdiscs's
children to this array. Following patches will make the allocation dynamic.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:43:13 -07:00
Petr Machata
b21832b568 mlxsw: spectrum_qdisc: Promote backlog reduction to mlxsw_sp_qdisc_destroy()
When a qdisc is removed, it is necessary to update the backlog value at its
parent--unless the qdisc is at root position. RED, TBF and FIFO all do
that, each separately. Since all of them need to do this, just promote the
operation directly to mlxsw_sp_qdisc_destroy(), instead of deferring it to
individual destructors. Since FIFO dtor thus becomes trivial, remove it.

Add struct mlxsw_sp_qdisc.parent to point at the parent qdisc. This will be
handy later as deeper structures are offloaded. Use the parent qdisc to
find the chain of parents whose backlog value needs to be updated.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:43:13 -07:00
Petr Machata
017a131cde mlxsw: spectrum_qdisc: Track tclass_num as int, not u8
tclass_num is just a number, a value that would be ordinarily passed around
as an int. (Which is unlike a u8 prio_bitmap.) In several places,
tclass_num already is an int. Convert the remaining instances.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:43:13 -07:00
Petr Machata
549f2aae84 mlxsw: spectrum_qdisc: Drop an always-true condition
The function mlxsw_sp_qdisc_compare() is invoked a couple lines above this
check, which will bounce any requests where this condition does not hold.
Therefore drop it.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:43:13 -07:00
Petr Machata
290fe2c595 mlxsw: spectrum_qdisc: Simplify mlxsw_sp_qdisc_compare()
The purpose of this function is to filter out events that are related to
qdiscs that are not offloaded, or are not offloaded anymore. But the
function is unnecessarily thorough:

- mlxsw_sp_qdisc pointer is never NULL in the context where it is called
- Two qdiscs with the same handle will never have different types. Even
  when replacing one qdisc with another in the same class, Linux will not
  permit handle reuse unless the qdisc type also matches.

Simplify the function by omitting these two unnecessary conditions.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:43:13 -07:00
Petr Machata
17c0e6d175 mlxsw: spectrum_qdisc: Drop one argument from check_params callback
The mlxsw_sp_qdisc argument is not used in any of the actual callbacks.
Drop it.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:43:13 -07:00
David S. Miller
790aad0ecc korina: Fix build.
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:40:08 -07:00
David S. Miller
b015f4efc4 Merge branch 'marvell-phy-hwmon'
Marek Behún says:

====================
net: phy: marvell: some HWMON updates

Here are some updates for Marvell PHY HWMON, mainly
- refactoring for code deduplication
- Amethyst PHY support
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:27:54 -07:00
Marek Behún
a978f7c479 net: phy: marvell: add support for Amethyst internal PHY
Add support for Amethyst internal PHY.

The only difference from Peridot is HWMON.

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:27:54 -07:00
Marek Behún
c5d015b0e0 net: dsa: mv88e6xxx: simulate Amethyst PHY model number
Amethyst internal PHYs also report empty model number in MII_PHYSID2.

Fill in switch product number, as is done for Topaz and Peridot.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:27:54 -07:00
Marek Behún
0021817351 net: phy: marvell: use assignment by bitwise AND operator
Use the &= operator instead of
  ret = ret & ...

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:27:53 -07:00
Marek Behún
4f920c299d net: phy: marvell: fix HWMON enable register for 6390
Register 27_6.15:14 has the following description in 88E6393X
documentation:
  Temperature Sensor Enable
    0x0 - Sample every 1s
    0x1 - Sense rate decided by bits 10:8 of this register
    0x2 - Use 26_6.5 (One shot Temperature Sample) to enable
    0x3 - Disable

This is compatible with how the 6390 code uses this register currently,
but the 6390 code handles it as two 1-bit registers (somewhat), instead
of one register with 4 possible values.

(A newer version of the 6390 documentation removed temperature sensor
 section completely. In an older version, the above mentioned register
 is reserved, although it is R/W. Since the code works, I think we can
 assume that it is correct.)

Rename this register and define all 4 values according to 6393X
documentation.

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:27:53 -07:00
Marek Behún
41d26bf4ab net: phy: marvell: refactor HWMON OOP style
Use a structure of Marvell PHY specific HWMON methods to reduce code
duplication. Store a pointer to this structure into the PHY driver's
driver_data member.

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:27:53 -07:00
David S. Miller
56e2e5de44 korina: Fix conflict with global symbol desc_empty on x86.
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:24:26 -07:00
David S. Miller
ff254dad0e mlx5-updates-2021-04-19
This patchset provides some updates to mlx5e and mlx5 SW steering drivers:
 
 1) Tariq and Vladyslav they both provide some trivial update to mlx5e netdev.
 
 The next 12 patches in the patchset are focused toward mlx5 SW steering:
 2) 3 trivial cleanup patches
 
 3) Dynamic Flex parser support:
    Flex parser is a HW parser that can support protocols that are not
     natively supported by the HCA, such as Geneve (TLV options) and GTP-U.
     There are 8 such parsers, and each of them can be assigned to parse a
     specific set of protocols.
 
 4) Enable matching on Geneve TLV options
 
 5) Use Flex parser for MPLS over UDP/GRE
 
 6) Enable matching on tunnel GTP-U and GTP-U first extension
    header using
 
 7) Improved QoS for SW steering internal QPair for a better insertion rate
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmB+R90ACgkQSD+KveBX
 +j5UKAf+OODHHlYUxp3k4uSRGPNHuVZsUw4DjoCY6b0E4uMup9bP0YF7/B1I8bpC
 xTbVK9SzYTVOt0pxBu3aJ1Qom5hpJt5iT7QG9m5LlhEn/ZD3KqpnenGuDMIlyOa5
 EvLIdeOoWxJ+7Za6pULy4hsbUcu8hupsBBN+poC3dN4akQu1NyvFE4mdHVTP/c7n
 DB0mZWskoDyXm1dQiZ4+cDWoltrrpFLo5n7N08QbS+AvJ7jsRrT5myBU4IPMEfP6
 peRecTpKZEOwBwTzxi41ao5XZYnKTROD3zax30v6DXxw5K41SQKwvCjgvpc2/V1J
 jymdJzdYa17mxu5XMC0aaQoFo2VBDg==
 =wwzX
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-updates-2021-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2021-04-19

This patchset provides some updates to mlx5e and mlx5 SW steering drivers:

1) Tariq and Vladyslav they both provide some trivial update to mlx5e netdev.

The next 12 patches in the patchset are focused toward mlx5 SW steering:
2) 3 trivial cleanup patches

3) Dynamic Flex parser support:
   Flex parser is a HW parser that can support protocols that are not
    natively supported by the HCA, such as Geneve (TLV options) and GTP-U.
    There are 8 such parsers, and each of them can be assigned to parse a
    specific set of protocols.

4) Enable matching on Geneve TLV options

5) Use Flex parser for MPLS over UDP/GRE

6) Enable matching on tunnel GTP-U and GTP-U first extension
   header using

7) Improved QoS for SW steering internal QPair for a better insertion rate
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:14:02 -07:00
Xiaoliang Yang
316bcffe44 net: dsa: felix: disable always guard band bit for TAS config
ALWAYS_GUARD_BAND_SCH_Q bit in TAS config register is descripted as
this:
	0: Guard band is implemented for nonschedule queues to schedule
	   queues transition.
	1: Guard band is implemented for any queue to schedule queue
	   transition.

The driver set guard band be implemented for any queue to schedule queue
transition before, which will make each GCL time slot reserve a guard
band time that can pass the max SDU frame. Because guard band time could
not be set in tc-taprio now, it will use about 12000ns to pass 1500B max
SDU. This limits each GCL time interval to be more than 12000ns.

This patch change the guard band to be only implemented for nonschedule
queues to schedule queues transition, so that there is no need to reserve
guard band on each GCL. Users can manually add guard band time for each
schedule queues in their configuration if they want.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:09:42 -07:00
David S. Miller
e655bbf903 Merge branch 'net-generic-selftest-support'
Oleksij Rempel says:

====================
provide generic net selftest support

changes v3:
- make more granular tests
- enable loopback for all PHYs by default
- fix allmodconfig build errors
- poll for link status update after switching to the loopback mode

changes v2:
- make generic selftests available for all networking devices.
- make use of net_selftest* on FEC, ag71xx and all DSA switches.
- add loopback support on more PHYs.

This patch set provides diagnostic capabilities for some iMX, ag71xx or
any DSA based devices. For proper functionality, PHY loopback support is
needed.
So far there is only initial infrastructure with basic tests.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:08:02 -07:00
Oleksij Rempel
a71acad90a net: dsa: enable selftest support for all switches by default
Most of generic selftest should be able to work with probably all ethernet
controllers. The DSA switches are not exception, so enable it by default at
least for DSA.

This patch was tested with SJA1105 and AR9331.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:08:02 -07:00
Oleksij Rempel
b62a12fc04 net: ag71xx: make use of generic NET_SELFTESTS library
With this patch the ag71xx on Atheros AR9331 will able to run generic net
selftests.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:08:02 -07:00
Oleksij Rempel
6016ba345f net: fec: make use of generic NET_SELFTESTS library
With this patch FEC on iMX will able to run generic net selftests

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:08:02 -07:00
Oleksij Rempel
3e1e58d64c net: add generic selftest support
Port some parts of the stmmac selftest and reuse it as basic generic selftest
library. This patch was tested with following combinations:
- iMX6DL FEC -> AT8035
- iMX6DL FEC -> SJA1105Q switch -> KSZ8081
- iMX6DL FEC -> SJA1105Q switch -> KSZ9031
- AR9331 ag71xx -> AR9331 PHY
- AR9331 ag71xx -> AR9331 switch -> AR9331 PHY

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:08:02 -07:00
Oleksij Rempel
014068dcb5 net: phy: genphy_loopback: add link speed configuration
In case of loopback, in most cases we need to disable autoneg support
and force some speed configuration. Otherwise, depending on currently
active auto negotiated link speed, the loopback may or may not work.

This patch was tested with following PHYs: TJA1102, KSZ8081, KSZ9031,
AT8035, AR9331.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:08:02 -07:00
Oleksij Rempel
f4f86d8d2c net: phy: execute genphy_loopback() per default on all PHYs
The generic loopback is really generic and is defined by the 802.3
standard, we should just mandate that drivers implement a custom
loopback if the generic one cannot work.

Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-20 16:08:02 -07:00
Ville Syrjälä
3a11529d61 drm/i915: Say "enable foo" instead of "set foo to enabled"
Use simpler sentences. Just say "enable foo" instead
of "set foo to enabled" etc.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-04-21 01:49:08 +03:00
Ville Syrjälä
0868b1ce87 drm/i915: Add enabledisable()
'enable ? "enable" : "disable"' is a fairly common pattern in
our debug prints. Let's introduce a helper for it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-04-21 01:48:36 +03:00
Ville Syrjälä
b88da66055 drm/i915: Polish for_each_dbuf_slice()
Now that we have the dbuf slice mask stored in the device info
let's use it for for_each_dbuf_slice_in_mask*().

With this we cal also rip out intel_dbuf_size() and
intel_dbuf_num_slices().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-04-21 01:31:04 +03:00
Ville Syrjälä
d152bb1f67 drm/i915: Use intel_de_rmw() for DBUF_POWER_REQUEST
Use intel_de_rmw() instead of hand rolling it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-04-21 01:27:21 +03:00
Ville Syrjälä
6390e5aa13 drm/i915: Use intel_dbuf_slice_size()
Use intel_dbuf_slice_size() instead of hand rolling it.
Also clean up some of the types.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-04-21 01:27:01 +03:00
Ville Syrjälä
578e6edec4 drm/i915: Store dbuf slice mask in device info
Let's just store the dbuf slice information as a bitmask
in the device info. Makes life a little easier later.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-04-21 01:26:17 +03:00
Ville Syrjälä
77531b0ef6 drm/i915: Handle dbuf bypass path allocation earlier
We always reserve the same 4 dbuf blocks for the bypass path
allocation, so might as well do that when declaring the dbuf
size.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-04-21 01:25:21 +03:00
Ville Syrjälä
708de86e10 drm/i915: Collect dbuf device info into a sub-struct
Collect the related dbuf information into a struct.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416171011.19012-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-04-21 01:23:46 +03:00
Gustavo A. R. Silva
be962b2f07 dm raid: fix fall-through warning in rs_check_takeover() for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-04-20 18:10:04 -04:00
Yanteng Si
441ca977a8 docs/zh_CN: add openrisc translation to zh_CN index
This patch add zh_CN/openrisc to zh_CN/index.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/162fb50638028c9b0a92a0ce5c53e691be0cfec2.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-20 16:08:15 -06:00
Yanteng Si
acc6a91a29 docs/zh_CN: add openrisc index.rst translation
This patch translates Documentation/openrisc/index.rst into Chinese.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/f3878525e0d5f94a9c541f5ec8fd31b44a6dc5cd.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-20 16:08:15 -06:00
Yanteng Si
30d0f7d7aa docs/zh_CN: add openrisc todo.rst translation
This patch translates Documentation/openrisc/todo.rst into Chinese.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/daf5b352ba62a4737148d524bcae0e64756ed6da.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-20 16:08:15 -06:00
Yanteng Si
3f59307f99 docs/zh_CN: add openrisc openrisc_port.rst translation
This patch tranlates Documentation/openrisc/openrisc_port.rst into Chinese

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/e116b3020dfd181c15a59ecf41673cd4dbeea3b2.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-20 16:08:14 -06:00
Yanteng Si
aa93de2030 docs/zh_CN: add core api translation to zh_CN index
This patch add zh_CN/core-api to zh_CN/index.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/f23ea90fe88a6ac34d29c6642abe9aceba7ccafb.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-20 16:08:14 -06:00
Yanteng Si
6c5c146cd9 docs/zh_CN: add core-api index.rst translation
This patch translates Documentation/core-api/index.rst into Chinese.
add Documentation/translations/zh_CN/core-api/irq/* to zh_CN/core-api/index.rst.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/d246fcd092111338d64f6b678dda2cd67fcb3f4a.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-20 16:08:14 -06:00
Yanteng Si
b9b4c38315 docs/zh_CN: add core-api irq index.rst translation
This patch translates Documentation/core-api/irq/index.rst into Chinese.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/f6f2edfa645badfdd29122bee3ff0c9577197691.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-20 16:08:14 -06:00
Yanteng Si
83d07650f5 docs/zh_CN: add core-api irq irqflags-tracing.rst translation
This patch translates Documentation/core-api/irq/irqflags-tracing.rst into Chinese.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/deb4b3649d7001f7505672cf45813f0064c9a8d0.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-20 16:08:14 -06:00
Yanteng Si
3e77439e69 docs/zh_CN: add core-api irq irq-domain.rst translation
This patch translates Documentation/core-api/irq/irq-domain.rst into Chinese.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/86e44d36315228408c8bd97360041a9f59a85462.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-20 16:08:14 -06:00
Yanteng Si
e8ebbdff7b docs/zh_CN: add core-api irq irq-affinity.rst translation
This patch translates Documentation/core-api/irq/irq-affinity.rst into Chinese.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/d235db96434baf472441877fc8ffca0f6f70a9f5.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-20 16:08:14 -06:00
Yanteng Si
b77e0ce62d docs/zh_CN: add core-api irq concepts.rst translation
This patch translates Documentation/core-api/irq/concepts.rst into Chinese.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/22babdd7e3fa5121360eff875d005ba5f4647e21.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-04-20 16:08:13 -06:00