mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-19 20:00:30 +00:00
1,169,205 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
5d26c176d5 |
- Use the newly introduced 'hot' and 'critical' ops for the acpi
thermal driver (Daniel Lezcano) - Remove the notify ops as it is no longer used (Daniel Lezcano) - Remove the 'forced passive' option and the unused bind/unbind functions (Daniel Lezcano) - Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro (Daniel Lezcano) - Rework the delays to make them pre-computed instead of computing them again and again at each polling interval (Daniel Lezcano) - Remove the pointless 'thermal_zone_device_reset' function (Daniel Lezcano) - Use the critical and hot ops to prevent an unexpected system shutdown on int340x (Kai-Heng Feng) - Make the cooling device state private to the thermal subsystem (Daniel Lezcano) - Prevent to use not-power-aware actor devices with the power allocator governor (Lukasz Luba) - Remove 'zx' and 'tango' support along with the corresponding platforms (Arnd Bergman) - Fix several issues on the Omap thermal driver (Tony Lindgren) - Add support for adc-tm5 PMIC thermal monitor for Qcom platforms. Please note those changes rely on an immutable branch: iio-thermal-5.11-rc1/ib-iio-thermal-5.11-rc1 from the iio tree (Dmitry Baryshkov) - Fix an initialization loop in the adc-tm5 (Colin Ian King) - Fix a return error check in the cpufreq cooling device (Viresh Kumar) -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmAvkKMACgkQqDIjiipP 6E9yFggAmXy8t2j1mRvn/KLU+teTGIoSFkZ8mBnY2Sgip97IRZRhCwAZbUKOW0eI bvpAzBjacxdZHT7OxxvGzCOq/zlAh4UoStI8bMpzdUWPdkAj4ippArLYGvagLym8 WEQysWnrr8V1RCZbQuBNjyLwjf0fcXkzIBU1mbZXA8T8Y6Yn646TdtsrVT4Idg1j MOg7PAHBcTSY/wOReZKJ5TB1yvo2tNOuGOqUVbrIAHlRkiNTVHirVUq6aZGtTTKp 7ukcu8EI/o7XKBdQ5d9MZaHdwkcyAIJj4jdjmjkUJpa8VYQFPjayNyN3I+Py9lH2 jtWVYHQxZbY166IZP2yeXFjPzd6elw== =Jmz4 -----END PGP SIGNATURE----- Merge tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Use the newly introduced 'hot' and 'critical' ops for the acpi thermal driver (Daniel Lezcano) - Remove the notify ops as it is no longer used (Daniel Lezcano) - Remove the 'forced passive' option and the unused bind/unbind functions (Daniel Lezcano) - Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro (Daniel Lezcano) - Rework the delays to make them pre-computed instead of computing them again and again at each polling interval (Daniel Lezcano) - Remove the pointless 'thermal_zone_device_reset' function (Daniel Lezcano) - Use the critical and hot ops to prevent an unexpected system shutdown on int340x (Kai-Heng Feng) - Make the cooling device state private to the thermal subsystem (Daniel Lezcano) - Prevent to use not-power-aware actor devices with the power allocator governor (Lukasz Luba) - Remove 'zx' and 'tango' support along with the corresponding platforms (Arnd Bergman) - Fix several issues on the Omap thermal driver (Tony Lindgren) - Add support for adc-tm5 PMIC thermal monitor for Qcom platforms (Dmitry Baryshkov) - Fix an initialization loop in the adc-tm5 (Colin Ian King) - Fix a return error check in the cpufreq cooling device (Viresh Kumar) * tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits) thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error thermal: qcom: Fix comparison with uninitialized variable channels_available thermal: qcom: add support for adc-tm5 PMIC thermal monitor dt-bindings: thermal: qcom: add adc-thermal monitor bindings thermal: ti-soc-thermal: Use non-inverted define for omap4 thermal: ti-soc-thermal: Simplify polling with iopoll thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430 thermal: ti-soc-thermal: Skip pointless register access for dra7 thermal/drivers/zx: Remove zx driver thermal/drivers/tango: Remove tango driver thermal: power allocator: fail binding for non-power actor devices thermal/core: Make cooling device state change private thermal: intel: pch: Fix unexpected shutdown at critical temperature thermal: int340x: Fix unexpected shutdown at critical temperature thermal/core: Remove pointless thermal_zone_device_reset() function thermal/core: Remove ms based delay fields thermal/core: Use precomputed jiffies for the polling thermal/core: Precompute the delays from msecs to jiffies thermal/core: Remove unused macro THERMAL_TRIPS_NONE thermal/core: Remove THERMAL_TRIPS_NONE test ... |
||
|
|
b996c10e0f |
chrome platform changes for 5.12
Lots of changes to the cros_ec_typec driver for 5.12.
A portion of this this set of cros_ec_typec driver's changes
(up to
|
||
|
|
f158bbee94 |
- Core Frameworks
- Standardise MFD_CELL_* helpers
- New Drivers
- Add support for Acer Iconia Tab A500 Embedded Controller
- New Device Support
- Add support for ROHM BD9574MWF to BD9571MWV
- Add support for Intel Alder Lake PCH-P PCI to LPSS
- Add support for Intel Alder Lake PCH-S PCI to LPSS
- New Functionality
- Support ACPI enumeration; arizona
- Fix-ups
- Managed resources; bd9571mwv
- DT additions/fix-ups; bd9571mwv, iqs62x, max8997, gateworks-gsc, ene-kb930
- Convert to SPDX; bd9571mw
- Fix return values/error handling; sunxi
- Provide SOFTDEP; arizona
- Make use of DIV_ROUND_UP; mcp-sa11x0
- Use generic APIs; arizona
- Add MAC address sysfs entries; intel-m10-bmc
- Trivial: Coding-style fix-ups; iqs62x
- Trivial: Remove superflouous code; iqs62x
- Clear-up naming conventions; iqs62x
- Bug Fixes
- Fix 'pointer from integer' error; altera-sysmgr
- Convert SGI_MFD_IOC3 from tristate to bool; Kconfig
- Fix interrupt handling; gateworks-gsc
- Extend required delay; iqs62x
- Do not use I2C polling during calibration; iqs62x
- Do no adjust clock frequency during calibration; iqs62x
- Fix use-after-free; wm831x-auxad
-----BEGIN PGP SIGNATURE-----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=ieAS
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Standardise MFD_CELL_* helpers
New Drivers:
- Add support for Acer Iconia Tab A500 Embedded Controller
New Device Support:
- Add support for ROHM BD9574MWF to BD9571MWV
- Add support for Intel Alder Lake PCH-P PCI to LPSS
- Add support for Intel Alder Lake PCH-S PCI to LPSS
New Functionality:
- Support ACPI enumeration; arizona
Fix-ups:
- Managed resources; bd9571mwv
- DT additions/fix-ups; bd9571mwv, iqs62x, max8997, gateworks-gsc, ene-kb930
- Convert to SPDX; bd9571mw
- Fix return values/error handling; sunxi
- Provide SOFTDEP; arizona
- Make use of DIV_ROUND_UP; mcp-sa11x0
- Use generic APIs; arizona
- Add MAC address sysfs entries; intel-m10-bmc
- Trivial: Coding-style fix-ups; iqs62x
- Trivial: Remove superflouous code; iqs62x
- Clear-up naming conventions; iqs62x
Bug Fixes:
- Fix 'pointer from integer' error; altera-sysmgr
- Convert SGI_MFD_IOC3 from tristate to bool; Kconfig
- Fix interrupt handling; gateworks-gsc
- Extend required delay; iqs62x
- Do not use I2C polling during calibration; iqs62x
- Do no adjust clock frequency during calibration; iqs62x
- Fix use-after-free; wm831x-auxad"
* tag 'mfd-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
mfd: wm831x-auxadc: Prevent use after free in wm831x_auxadc_read_irq()
mfd: iqs62x: Do not change clock frequency during ATI
mfd: iqs62x: Do not poll during ATI
mfd: iqs62x: Increase interrupt handler return delay
mfd: iqs62x: Rename regmap_config struct
mfd: iqs62x: Remove unused bit mask
mfd: iqs62x: Remove superfluous whitespace above fallthroughs
mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs
mfd: intel-m10-bmc: Expose MAC address and count
mfd: Add driver for Embedded Controller found on Acer Iconia Tab A500
dt-bindings: mfd: Add ENE KB930 Embedded Controller binding
dt-bindings: mfd: gateworks-gsc: Add fan-tach mode
mfd: intel-lpss: Add Intel Alder Lake PCH-P PCI IDs
mfd: gateworks-gsc: Fix interrupt type
mfd: Standardise MFD_CELL_* helper names
mfd: mcp-sa11x0: Use DIV_ROUND_UP to calculate rw_timeout
mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell
dt-bindings: mfd: Correct the node name of the panel LED
mfd: sgi-ioc3: Turn Kconfig option into a bool
mfd: altera-sysmgr: Fix physical address storing more
...
|
||
|
|
4512d92b03 |
- New Functionality
- Convert to GPIO descriptors
- Fix-ups
- Trivial: Fix coding style: sky81452-backlight
- Ensure backlight state is known on bring-up; ktd253-backlight
- Use common Platform API; qcom-wled, fbdev
-----BEGIN PGP SIGNATURE-----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=GPmS
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Convert to GPIO descriptors
Fix-ups:
- Trivial: fix coding style in sky81452-backlight
- Ensure backlight state is known on bring-up in ktd253
- Use common platform API in qcom-wled and fbdev"
* tag 'backlight-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight/video: Use Platform getter/setter functions
backlight: ktd253: Bring up in a known state
backlight: sky81452-backlight: Convert comma to semicolon
backlight: lms283gf05: Convert to GPIO descriptors
|
||
|
|
66615c4ee2 |
A set of auxdisplay fixes and improvements from Geert Uytterhoeven.
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmArjR4ACgkQGXyLc2ht IW2ipw/7BD0YPmDDyLfDebdBlm5in63kiIkzZBLyT9Wj/GkPEd+KrzFBcNupyL5J wWsNgO9UqwEAXmWYWh3idtXCZGDzWQrdvmibahtFyjco3UwSQLeZkhXCL5ZpIjO+ mwHIUJbs1SXYcSbY+uk2cLOW5FLw/wGiTj//LFdrFov4F3Sxj2ngdqd1mvMKrY19 2gZwzUMB+tFoagFw6q+SUD5O2s/fU/zTO4OIORvQYQY3ohW9VGjCNRw862mD4faU 9WjuJFZQcRA+AaW/6TYgGSUG0cVBV9uahPBSFvrE/Hyd+uiHQNI8GGiAPBccp5jo SCy6dd7MJoYj8m1cy0P3NHDkh4ZUCUtf476YH+ngQzxJcwy0e0OdxnYVdug5whDn MsCnD2O32lXgHS0+q7w79KAGFOfszUg4hKLXQCwrvU5Ie1ANcM6+ZvCqdWqppzVi cefuN2Rux8Ic4dcqYF0XtEQQ6doMOQwctS4xSSvBRa4BYoI50sK6r9UaxpVhodw7 52bKJpEQGsbfZpVs/eJEUINeiFNnb0+Uy02d8VB4MNaIlKhPd4xjskAKfbtgW9Vm wH/cp9IHAKYI2+ruOyPnW+5SEMizwe8knH/AlJwNg48w9d2H1/vEufM3HHRHhy5H GPoQJAStNd3yXEPhIDoaNAEhVGqa3/En8RxaWNBIQftswTkNJlw= =zJEN -----END PGP SIGNATURE----- Merge tag 'auxdisplay-for-linus-v5.12' of git://github.com/ojeda/linux Pull auxdisplay updates from Miguel Ojeda: "A set of auxdisplay fixes and improvements from Geert Uytterhoeven, and one from Robin van der Gracht that got lost a long time ago" * tag 'auxdisplay-for-linus-v5.12' of git://github.com/ojeda/linux: auxdisplay: Fix duplicate CHARLCD config symbol auxdisplay: ht16k33: Fix refresh rate handling dt-bindings: auxdisplay: ht16k33: Convert to json-schema dt-bindings: auxdisplay: ht16k33: Fix default-brightness-level range dt-bindings: auxdisplay: ht16k33: Keyscan function should be optional |
||
|
|
a2590d6989 |
spi: Updates for v5.12
The main focus of this release from a framework point of view has been
spi-mem where we've acquired support for a few new hardware features
which enable better performance on suitable hardware. Otherwise mostly
thanks to Arnd's cleanup efforts on old platforms we've removed several
obsolete drivers which just about balance out the newer drivers we've
added this cycle.
- Allow drivers to flag if they are unidirectional.
- Support for DTR mode and hardware acceleration of dummy cycles in spi-mem.
- Support for Allwinder H616, Intel Lightning Mountain, nVidia Tegra
QuadSPI, Realtek RTL838x and RTL839x.
- Removal of obsolute EFM32, Txx9 and SIRF Prima and Atlas drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAq3M0ACgkQJNaLcl1U
h9Aq3gf6AuboDwFguKZAmXp27zjYsv5o5KtPyycTltIIfjGuA58+fN2zQT+puoGI
wzafjk9R73Foa67YKUwClaBGZNZbYOkB2iOk9a+/sku6k3jO14moybpMuL32dCVe
lutKd9D4n8/J5UHX3SHKHAZ9r2vp28rlaZa4wd79Ww5r+BLajUcrkjtr4GVT5k1k
WzzC0nUjE/zg1oV+PlakMolwK+iBCQYTT7S4r/OQAABQIkXXdtwmGvFUUXpGVF19
GUs52XI8QzK5504Xl+F7NF1+2zHovO11PTHnd+rAe6AfA/NGggtk6O1Y9R4tQHF9
TN6PHukNxUdTFfe6RTbSzPagpFydvQ==
=/4Ve
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The main focus of this release from a framework point of view has been
spi-mem where we've acquired support for a few new hardware features
which enable better performance on suitable hardware.
Otherwise mostly thanks to Arnd's cleanup efforts on old platforms
we've removed several obsolete drivers which just about balance out
the newer drivers we've added this cycle.
Summary:
- Allow drivers to flag if they are unidirectional.
- Support for DTR mode and hardware acceleration of dummy cycles in
spi-mem.
- Support for Allwinder H616, Intel Lightning Mountain, nVidia Tegra
QuadSPI, Realtek RTL838x and RTL839x.
- Removal of obsolete EFM32, Txx9 and SIRF Prima and Atlas drivers"
* tag 'spi-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (76 commits)
spi: Skip zero-length transfers in spi_transfer_one_message()
spi: dw: Avoid stack content exposure
spi: cadence-quadspi: Use spi_mem_dtr_supports_op()
spi: spi-mem: add spi_mem_dtr_supports_op()
spi: atmel-quadspi: Disable the QSPI IP at suspend()
spi: pxa2xx: Add IDs for the controllers found on Intel Lynxpoint
spi: pxa2xx: Fix the controller numbering for Wildcat Point
spi: Change provied to provided in the file spi.h
spi: mediatek: add set_cs_timing support
spi: support CS timing for HW & SW mode
spi: add power control when set_cs_timing
spi: stm32: make spurious and overrun interrupts visible
spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC
spi: stm32: defer probe for reset
spi: stm32: driver uses reset controller only at init
spi: stm32h7: ensure message are smaller than max size
spi: stm32: use bitfield macros
spi: stm32: do not mandate cs_gpio
spi: stm32: properly handle 0 byte transfer
spi: clps711xx: remove redundant white-space
...
|
||
|
|
07956b6269 |
vfio/type1: Use follow_pte()
follow_pfn() doesn't make sure that we're using the correct page
protections, get the pte with follow_pte() so that we can test
protections and get the pfn from the pte.
Fixes:
|
||
|
|
d6560052c2 |
regulator: Updates for v5.12
Quite an active release for driver specific updates but very little
going on at the subsystem level this time for the regulator API.
- Overhaul of the Qualcomm LABIBB driver.
- Allow use of regulator_sync_voltage() on coupled regulators.
- Support for Action ATC260x, Mediatek DVSRC and MT6315, Qualcomm
PCM8180/c and PM8009-1 and Richtek RT4831
- Removal of the AB3100 driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAq2owACgkQJNaLcl1U
h9B1LQf/ShkuoDrWxPXNBkcxTd7F2SleqLw4c6rKo6ghNmyHzORnr/uDG1UKDJE9
DIkmmXJWPcqAzFeKfTCpmSuadbTgFbbjfdvWFEhS4a6xoRQ+Zk2cnsrx5JA+98Jy
kmHI7ACgzJUMCzXoPwPHUDg2iLSAuc+L5GcERIJDMqgszfCmCRWpvstH+XzmoJyP
gLfacrgrvFn/HtHR8xiMH4ueZxIgZqcDB4PVUDhgFQyMZt95+XwV43e9yyuvMcNh
Rxo+tjaYg5O7I9Lrmnt54PFJHmC4/ZmEF8RzjY8B9lRnhkpFt/JG61hfKp84Z0+E
OLqCU6b50Kd9aTd6Ep/etaDzNOSTuA==
=6tOD
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Quite an active release for driver specific updates but very little
going on at the subsystem level this time for the regulator API.
Summary:
- Overhaul of the Qualcomm LABIBB driver.
- Allow use of regulator_sync_voltage() on coupled regulators.
- Support for Action ATC260x, Mediatek DVSRC and MT6315, Qualcomm
PCM8180/c and PM8009-1 and Richtek RT4831
- Removal of the AB3100 driver"
* tag 'regulator-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (49 commits)
regulator: bd718x7, bd71828, Fix dvs voltage levels
regulator: pca9450: Add sd-vsel GPIO
regulator: pca9450: Enable system reset on WDOG_B assertion
regulator: pca9450: Add SD_VSEL GPIO for LDO5
regulator: qcom-rpmh: fix pm8009 ldo7
regulator: mt6315: Add support for MT6315 regulator
regulator: document binding for MT6315 regulator
regulator: dt-bindings: Document charger-supply for max8997
regulator: qcom-labibb: Use disable_irq_nosync from isr
regulator: pf8x00: Fix typo for PF8200 chip name
regulator: pf8x00: set ramp_delay for bucks
regulator: core: Avoid debugfs: Directory ... already present! error
regulator: pf8x00: Add suspend support
regulator: Make regulator_sync_voltage() usable by coupled regulators
regulator: s5m8767: Drop regulators OF node reference
regulator: qcom-rpmh: Add pmc8180 and pmc8180c
regulator: qcom-rpmh: Add pmc8180 and pmc8180c
regulator: s5m8767: Fix reference count leak
regulator: remove ab3100 driver
regulator: axp20x: Fix reference cout leak
...
|
||
|
|
72d6e4871f |
Merge commit '3e10585335' into v5.12/vfio/next
Update to new follow_pte() definition |
||
|
|
05a6fb94a6 |
regmap: Update for v5.12
Just one simple code style improvement this time, no features. There is an addition to add a new SoundWire regmap type but that should be coming via the SoundWire tree as the support for the underlying bus features was only added this cycle. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAq2RQACgkQJNaLcl1U h9Dgmgf+KXNfzSmDSP3ysyfA3CS07NKAOh2WpmKLuKNq0/b4b0Z28YNy1Fm47C+a MwgcyTitzu4cSsRa2jxdqdZ4q+W8rKlQHpgw0tLcu9sq34Ky856rOCHWOXqYb0M2 yFiJvS+8koTxsMe4bXr2SGO1J2MomXei7Ki6ewHEHMpZvMBwN6Ew3520QEqCbLy4 slp21fPnM+uQP9b5o/cNbvPvJQsLf4aU9EOFTxJJfplLXxNege4P4fa+wX2GQeGm Ent7njQHT1l27PY9KHpWSCg8INit/iEEzYJ9XzuXv6682WxvYtDMC/CYmmH7rnKu ccklGJdhgd1y71DNC953noemybis0g== =INU0 -----END PGP SIGNATURE----- Merge tag 'regmap-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap update from Mark Brown: "Just one simple code style improvement this time, no features. There is an addition to add a new SoundWire regmap type but that should be coming via the SoundWire tree as the support for the underlying bus features was only added this cycle" * tag 'regmap-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Assign boolean values to a bool variable |
||
|
|
6e37d24599 |
btrfs: zoned: fix deadlock on log sync
Lockdep with fstests test case btrfs/041 detected a unsafe locking
scenario when we allocate the log node on a zoned filesystem.
btrfs/041
============================================
WARNING: possible recursive locking detected
5.11.0-rc7+ #939 Not tainted
--------------------------------------------
xfs_io/698 is trying to acquire lock:
ffff88810cd673a0 (&root->log_mutex){+.+.}-{3:3}, at: btrfs_sync_log+0x3d1/0xee0 [btrfs]
but task is already holding lock:
ffff88810b0fc3a0 (&root->log_mutex){+.+.}-{3:3}, at: btrfs_sync_log+0x313/0xee0 [btrfs]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&root->log_mutex);
lock(&root->log_mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by xfs_io/698:
#0: ffff88810cd66620 (sb_internal){.+.+}-{0:0}, at: btrfs_sync_file+0x2c3/0x570 [btrfs]
#1: ffff88810b0fc3a0 (&root->log_mutex){+.+.}-{3:3}, at: btrfs_sync_log+0x313/0xee0 [btrfs]
stack backtrace:
CPU: 0 PID: 698 Comm: xfs_io Not tainted 5.11.0-rc7+ #939
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0x77/0x97
__lock_acquire.cold+0xb9/0x32a
lock_acquire+0xb5/0x400
? btrfs_sync_log+0x3d1/0xee0 [btrfs]
__mutex_lock+0x7b/0x8d0
? btrfs_sync_log+0x3d1/0xee0 [btrfs]
? btrfs_sync_log+0x3d1/0xee0 [btrfs]
? find_first_extent_bit+0x9f/0x100 [btrfs]
? __mutex_unlock_slowpath+0x35/0x270
btrfs_sync_log+0x3d1/0xee0 [btrfs]
btrfs_sync_file+0x3a8/0x570 [btrfs]
__x64_sys_fsync+0x34/0x60
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This happens, because we are taking the ->log_mutex albeit it has already
been locked.
Also while at it, fix the bogus unlock of the tree_log_mutex in the error
handling.
Fixes:
|
||
|
|
53f523f305 |
bpf: Clear percpu pointers in bpf_prog_clone_free()
Similar to bpf_prog_realloc(), bpf_prog_clone_create() also copies the percpu pointers, but the clone still shares them with the original prog, so we have to clear these two percpu pointers in bpf_prog_clone_free(). Otherwise we would get a double free: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 13 PID: 8140 Comm: kworker/13:247 Kdump: loaded Tainted: G W OE 5.11.0-rc4.bm.1-amd64+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 test_bpf: #1 TXA Workqueue: events bpf_prog_free_deferred RIP: 0010:percpu_ref_get_many.constprop.97+0x42/0xf0 Code: [...] RSP: 0018:ffffa6bce1f9bda0 EFLAGS: 00010002 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000021dfc7b RDX: ffffffffae2eeb90 RSI: 867f92637e338da5 RDI: 0000000000000046 RBP: ffffa6bce1f9bda8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000046 R11: 0000000000000000 R12: 0000000000000280 R13: 0000000000000000 R14: 0000000000000000 R15: ffff9b5f3ffdedc0 FS: 0000000000000000(0000) GS:ffff9b5f2fb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000027c36c002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: refill_obj_stock+0x5e/0xd0 free_percpu+0xee/0x550 __bpf_prog_free+0x4d/0x60 process_one_work+0x26a/0x590 worker_thread+0x3c/0x390 ? process_one_work+0x590/0x590 kthread+0x130/0x150 ? kthread_park+0x80/0x80 ret_from_fork+0x1f/0x30 This bug is 100% reproducible with test_kmod.sh. Fixes: |
||
|
|
deb8d159a0 |
linux-watchdog 5.12-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAmAqlS8ACgkQ+iyteGJfRsr9ZgCgh199RT5DiKUUJtrI/crjWeMF GVwAoI6OxC2lB83hdcon8wsMpLk5dkvZ =ZvHY -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-5.12-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: "New drivers: - Intel Keembay Soc New chip versions: - sun4i: Add H616 compatible string - mt8192 wdt support - more Rockchip compatibles to snps,dw-wdt.yaml - binding for Qcom SDX55 - r8a779a0 (V3U) support Removed drivers: - sirf prima watchdog driver - sirf atlas watchdog driver - zte zx watchdog driver - tango watchdog driver - coh901 watchdog driver And several fixes and clean-ups" * tag 'linux-watchdog-5.12-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits) watchdog: qcom: Remove incorrect usage of QCOM_WDT_ENABLE_IRQ watchdog: mei_wdt: request stop on unregister dt-bindings: watchdog: Add binding for Qcom SDX55 watchdog: remove coh901 driver watchdog: remove tango driver watchdog: remove zte zx driver watchdog: remove sirf atlas driver watchdog: remove sirf prima driver watchdog: mt8192: add wdt support dt-binding: mt8192: add toprgu reset-controller head file dt-binding: mediatek: mt8192: update mtk-wdt document dt-binding: mediatek: watchdog: fix the description of compatible dt-binding: watchdog: add more Rockchip compatibles to snps,dw-wdt.yaml dt-bindings: watchdog: sun4i: Add H616 compatible string watchdog: mtk_wdt: Remove mtk_wdt_stop() in probe() to prevent the system freeze and it doesn't reboot by watchdog problem watchdog: renesas_wdt: add grace period before rebooting watchdog: stop wdd when watchdog hw running in reboot_notifier watchdog: ziirave_wdt: remove unused including <linux/version.h> dt-bindings: watchdog: renesas,wdt: add r8a779a0 (V3U) support watchdog: renesas_wdt: don't sleep in atomic context ... |
||
|
|
95c85fba1f |
btrfs: avoid double put of block group when emptying cluster
It's wrong calling btrfs_put_block_group in
__btrfs_return_cluster_to_free_space if the block group passed is
different than the block group the cluster represents. As this means the
cluster doesn't have a reference to the passed block group. This results
in double put and a use-after-free bug.
Fix this by simply bailing if the block group we passed in does not
match the block group on the cluster.
Fixes:
|
||
|
|
3660d0bcdb |
btrfs: fix stale data exposure after cloning a hole with NO_HOLES enabled
When using the NO_HOLES feature, if we clone a file range that spans only
a hole into a range that is at or beyond the current i_size of the
destination file, we end up not setting the full sync runtime flag on the
inode. As a result, if we then fsync the destination file and have a power
failure, after log replay we can end up exposing stale data instead of
having a hole for that range.
The conditions for this to happen are the following:
1) We have a file with a size of, for example, 1280K;
2) There is a written (non-prealloc) extent for the file range from 1024K
to 1280K with a length of 256K;
3) This particular file extent layout is durably persisted, so that the
existing superblock persisted on disk points to a subvolume root where
the file has that exact file extent layout and state;
4) The file is truncated to a smaller size, to an offset lower than the
start offset of its last extent, for example to 800K. The truncate sets
the full sync runtime flag on the inode;
6) Fsync the file to log it and clear the full sync runtime flag;
7) Clone a region that covers only a hole (implicit hole due to NO_HOLES)
into the file with a destination offset that starts at or beyond the
256K file extent item we had - for example to offset 1024K;
8) Since the clone operation does not find extents in the source range,
we end up in the if branch at the bottom of btrfs_clone() where we
punch a hole for the file range starting at offset 1024K by calling
btrfs_replace_file_extents(). There we end up not setting the full
sync flag on the inode, because we don't know we are being called in
a clone context (and not fallocate's punch hole operation), and
neither do we create an extent map to represent a hole because the
requested range is beyond eof;
9) A further fsync to the file will be a fast fsync, since the clone
operation did not set the full sync flag, and therefore it relies on
modified extent maps to correctly log the file layout. But since
it does not find any extent map marking the range from 1024K (the
previous eof) to the new eof, it does not log a file extent item
for that range representing the hole;
10) After a power failure no hole for the range starting at 1024K is
punched and we end up exposing stale data from the old 256K extent.
Turning this into exact steps:
$ mkfs.btrfs -f -O no-holes /dev/sdi
$ mount /dev/sdi /mnt
# Create our test file with 3 extents of 256K and a 256K hole at offset
# 256K. The file has a size of 1280K.
$ xfs_io -f -s \
-c "pwrite -S 0xab -b 256K 0 256K" \
-c "pwrite -S 0xcd -b 256K 512K 256K" \
-c "pwrite -S 0xef -b 256K 768K 256K" \
-c "pwrite -S 0x73 -b 256K 1024K 256K" \
/mnt/sdi/foobar
# Make sure it's durably persisted. We want the last committed super
# block to point to this particular file extent layout.
sync
# Now truncate our file to a smaller size, falling within a position of
# the second extent. This sets the full sync runtime flag on the inode.
# Then fsync the file to log it and clear the full sync flag from the
# inode. The third extent is no longer part of the file and therefore
# it is not logged.
$ xfs_io -c "truncate 800K" -c "fsync" /mnt/foobar
# Now do a clone operation that only clones the hole and sets back the
# file size to match the size it had before the truncate operation
# (1280K).
$ xfs_io \
-c "reflink /mnt/foobar 256K 1024K 256K" \
-c "fsync" \
/mnt/foobar
# File data before power failure:
$ od -A d -t x1 /mnt/foobar
|
||
|
|
1119a72e22 |
btrfs: tree-checker: do not error out if extent ref hash doesn't match
The tree checker checks the extent ref hash at read and write time to
make sure we do not corrupt the file system. Generally extent
references go inline, but if we have enough of them we need to make an
item, which looks like
key.objectid = <bytenr>
key.type = <BTRFS_EXTENT_DATA_REF_KEY|BTRFS_TREE_BLOCK_REF_KEY>
key.offset = hash(tree, owner, offset)
However if key.offset collide with an unrelated extent reference we'll
simply key.offset++ until we get something that doesn't collide.
Obviously this doesn't match at tree checker time, and thus we error
while writing out the transaction. This is relatively easy to
reproduce, simply do something like the following
xfs_io -f -c "pwrite 0 1M" file
offset=2
for i in {0..10000}
do
xfs_io -c "reflink file 0 ${offset}M 1M" file
offset=$(( offset + 2 ))
done
xfs_io -c "reflink file 0 17999258914816 1M" file
xfs_io -c "reflink file 0 35998517829632 1M" file
xfs_io -c "reflink file 0 53752752058368 1M" file
btrfs filesystem sync
And the sync will error out because we'll abort the transaction. The
magic values above are used because they generate hash collisions with
the first file in the main subvol.
The fix for this is to remove the hash value check from tree checker, as
we have no idea which offset ours should belong to.
Reported-by: Tuomas Lähdekorpi <tuomas.lahdekorpi@gmail.com>
Fixes:
|
||
|
|
dd0734f2a8 |
btrfs: fix race between swap file activation and snapshot creation
When creating a snapshot we check if the current number of swap files, in
the root, is non-zero, and if it is, we error out and warn that we can not
create the snapshot because there are active swap files.
However this is racy because when a task started activation of a swap
file, another task might have started already snapshot creation and might
have seen the counter for the number of swap files as zero. This means
that after the swap file is activated we may end up with a snapshot of the
same root successfully created, and therefore when the first write to the
swap file happens it has to fall back into COW mode, which should never
happen for active swap files.
Basically what can happen is:
1) Task A starts snapshot creation and enters ioctl.c:create_snapshot().
There it sees that root->nr_swapfiles has a value of 0 so it continues;
2) Task B enters btrfs_swap_activate(). It is not aware that another task
started snapshot creation but it did not finish yet. It increments
root->nr_swapfiles from 0 to 1;
3) Task B checks that the file meets all requirements to be an active
swap file - it has NOCOW set, there are no snapshots for the inode's
root at the moment, no file holes, no reflinked extents, etc;
4) Task B returns success and now the file is an active swap file;
5) Task A commits the transaction to create the snapshot and finishes.
The swap file's extents are now shared between the original root and
the snapshot;
6) A write into an extent of the swap file is attempted - there is a
snapshot of the file's root, so we fall back to COW mode and therefore
the physical location of the extent changes on disk.
So fix this by taking the snapshot lock during swap file activation before
locking the extent range, as that is the order in which we lock these
during buffered writes.
Fixes:
|
||
|
|
195a49eaf6 |
btrfs: fix race between writes to swap files and scrub
When we active a swap file, at btrfs_swap_activate(), we acquire the
exclusive operation lock to prevent the physical location of the swap
file extents to be changed by operations such as balance and device
replace/resize/remove. We also call there can_nocow_extent() which,
among other things, checks if the block group of a swap file extent is
currently RO, and if it is we can not use the extent, since a write
into it would result in COWing the extent.
However we have no protection against a scrub operation running after we
activate the swap file, which can result in the swap file extents to be
COWed while the scrub is running and operating on the respective block
group, because scrub turns a block group into RO before it processes it
and then back again to RW mode after processing it. That means an attempt
to write into a swap file extent while scrub is processing the respective
block group, will result in COWing the extent, changing its physical
location on disk.
Fix this by making sure that block groups that have extents that are used
by active swap files can not be turned into RO mode, therefore making it
not possible for a scrub to turn them into RO mode. When a scrub finds a
block group that can not be turned to RO due to the existence of extents
used by swap files, it proceeds to the next block group and logs a warning
message that mentions the block group was skipped due to active swap
files - this is the same approach we currently use for balance.
Fixes:
|
||
|
|
19472481bf |
MMC core:
- Add support for eMMC inline encryption - Add a helper function to parse DT properties for clock phases - Some improvements and cleanups for the mmc_test module MMC host: - android-goldfish: Remove driver - cqhci: Add support for eMMC inline encryption - dw_mmc-zx: Remove driver - meson-gx: Extend support for scatter-gather to allow SD_IO_RW_EXTENDED - mmci: Add support for probing bus voltage level translator - mtk-sd: Address race condition for request timeouts - sdhci_am654: Add Support for the variant on TI's AM64 SoC - sdhci-esdhc-imx: Prevent kernel panic at ->remove() - sdhci-iproc: Add ACPI bindings for the RPi to enable SD and WiFi on RPi4 - sdhci-msm: Add Inline Crypto Engine support - sdhci-msm: Use actual_clock to improve timeout calculations - sdhci-of-aspeed: Add Andrew Jeffery as maintainer - sdhci-of-aspeed: Extend clock support for the AST2600 variant - sdhci-pci-gli: Increase idle period for low power state for GL9763E - sdhci-pci-o2micro: Make tuning for SDR104 HW more robust - sdhci-sirf: Remove driver - sdhci-xenon: Add support for the AP807 variant - sunxi-mmc: Add support for the A100 variant - sunxi-mmc: Ensure host is suspended during system sleep - tmio: Add detection of data timeout errors - tmio/renesas_sdhi: Extend support for retuning - renesas_sdhi_internal_dmac: Add support for the ->pre|post_req() ops -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmAqZ+YXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmB8RAAwIwsLZXLQhNfzFGZvs+gbihd hgHnPXCHxLge2VDph1KKCCkxnjKTKHfB3McZOrlNZI0wiCBMSI+ZuoxIT0UlWqsy IyZ1s3u1YT30tPpyZ8UqYDzft/9/vX1TiZlLqsYnN05ykIe7siaeBb/w/8py0ip3 rVptRn49V2TRHiu/J8FvVF1diPMKNn1S063Xyrxu4yWnQX040xHC+tyDCl9xclWR oUDl1eqJmZRomijPu+AKte3uDppcr4ejDxfvzPrx4bpJNS7ZgJ5TG5MtDm+j+0Vu aJT0bPcfn/jvHahCcpcKkYcuesKIw2CFbglv9aIxbvOfEUkTSL4zO+VCvKD9r+wk WSXrPZ27ukTJmZIA6JqdUfs3/4oi5/80uA2kQkhfyYmlA7sLJcdRmBzSgltpJWp5 bmno/grpEXUgN59F5xe3/gINQNgAt319vmOPQg2LFF/uiOWfRytunNgXCCYMJQX8 1U9q6RHQWfdcasCOhAA9U9NxM1zecuIYb/2ecDhmovSmpElxdUFuN+TW1Om/xKHh o0xxu+/654dcehyHdW8/3kq9Oz9fhBoorC3F/OUm0k0DBL50G+476hl1rbhTMVl+ SlPIUvDxCu2GRwAuprQ9vu+jUGUSvC8mfxswQkrcLak/iPeOyYNrLDFN9nA80Kve G40UQwsDC3u7X1Z7rkY= =rwB7 -----END PGP SIGNATURE----- Merge tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Add support for eMMC inline encryption - Add a helper function to parse DT properties for clock phases - Some improvements and cleanups for the mmc_test module MMC host: - android-goldfish: Remove driver - cqhci: Add support for eMMC inline encryption - dw_mmc-zx: Remove driver - meson-gx: Extend support for scatter-gather to allow SD_IO_RW_EXTENDED - mmci: Add support for probing bus voltage level translator - mtk-sd: Address race condition for request timeouts - sdhci_am654: Add Support for the variant on TI's AM64 SoC - sdhci-esdhc-imx: Prevent kernel panic at ->remove() - sdhci-iproc: Add ACPI bindings for the RPi to enable SD and WiFi on RPi4 - sdhci-msm: Add Inline Crypto Engine support - sdhci-msm: Use actual_clock to improve timeout calculations - sdhci-of-aspeed: Add Andrew Jeffery as maintainer - sdhci-of-aspeed: Extend clock support for the AST2600 variant - sdhci-pci-gli: Increase idle period for low power state for GL9763E - sdhci-pci-o2micro: Make tuning for SDR104 HW more robust - sdhci-sirf: Remove driver - sdhci-xenon: Add support for the AP807 variant - sunxi-mmc: Add support for the A100 variant - sunxi-mmc: Ensure host is suspended during system sleep - tmio: Add detection of data timeout errors - tmio/renesas_sdhi: Extend support for retuning - renesas_sdhi_internal_dmac: Add support for the ->pre|post_req() ops" * tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits) mmc: sdhci-esdhc-imx: fix kernel panic when remove module mmc: host: Retire MMC_GOLDFISH mmc: cb710: Use new tasklet API mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure mmc: mmc_test: use erase_arg for mmc_erase command mmc: wbsd: Use new tasklet API mmc: via-sdmmc: Use new tasklet API mmc: uniphier-sd: Use new tasklet API mmc: tifm_sd: Use new tasklet API mmc: s3cmci: Use new tasklet API mmc: omap: Use new tasklet API mmc: dw_mmc: Use new tasklet API mmc: au1xmmc: Use new tasklet API mmc: atmel-mci: Use new tasklet API mmc: cavium: Replace spin_lock_irqsave with spin_lock in hard IRQ mmc: queue: Remove unused define mmc: core: Drop redundant bouncesz from struct mmc_card mmc: core: Drop redundant member in struct mmc host mmc: core: Use host instead of card argument to mmc_spi_send_csd() mmc: core: Exclude unnecessary header file ... |
||
|
|
33ccec5fd7 |
bpf: Fix a warning message in mark_ptr_not_null_reg()
The WARN_ON() argument is a condition, not an error message. So this
code will print a stack trace but will not print the warning message.
Fix that and also change it to only WARN_ONCE().
Fixes:
|
||
|
|
b29dd96b90 |
bpf, x86: Fix BPF_FETCH atomic and/or/xor with r0 as src
This code generates a CMPXCHG loop in order to implement atomic_fetch
bitwise operations. Because CMPXCHG is hard-coded to use rax (which
holds the BPF r0 value), it saves the _real_ r0 value into the
internal "ax" temporary register and restores it once the loop is
complete.
In the middle of the loop, the actual bitwise operation is performed
using src_reg. The bug occurs when src_reg is r0: as described above,
r0 has been clobbered and the real r0 value is in the ax register.
Therefore, perform this operation on the ax register instead, when
src_reg is r0.
Fixes:
|
||
|
|
32c080c4b5 |
Merge branch 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - mostly driver updates. Bigger ones for mlxcpld and iproc. But most of them are all over the place. - removal of the efm32, sirf, u300, and zte zx bus drivers because of platform removal. So, we have a pleasant diffstat this time. - first set of cleanups in the I2C core as preparation to increase maximum length of SMBus transfers to 255 (as specified in the new standard). Better documentation of struct i2c_msg and its flags stand out here. - the testunit can now respond to SMBus block process calls which is the testcase when implementing the above new maximum length. * 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (62 commits) i2c: remove redundant error print in stm32f7_i2c_probe i2c: testunit: add support for block process calls i2c: busses: Replace spin_lock_irqsave with spin_lock in hard IRQ dt-bindings: eeprom: at24: Document ROHM BR24G01 i2c: i801: Add support for Intel Alder Lake PCH-P i2c: mv64xxx: Fix check for missing clock after adding RPM i2c: mux: mlxcpld: Add callback to notify mux creation completion i2c: mux: mlxcpld: Extend supported mux number i2c: mux: mlxcpld: Extend driver to support word address space devices i2c: mux: mlxcpld: Get rid of adapter numbers enforcement i2c: mux: mlxcpld: Prepare mux selection infrastructure for two-byte support i2c: mux: mlxcpld: Convert driver to platform driver i2c: imx: Synthesize end of transaction events without idle interrupts i2c: i2c-qcom-geni: Add shutdown callback for i2c i2c: mv64xxx: Add runtime PM support i2c: amd-mp2: Remove unused macro i2c: amd-mp2: convert to PCI logging functions i2c: mux: mlxcpld: Move header file out of x86 realm platform/x86: mlxcpld: Update module license i2c: mux: mlxcpld: Update module license ... |
||
|
|
a26a9d8ab4 |
hwmon updates for v5.12
- New drivers Texas Instruments TPS23861 driver AHT10 Temperature and Humidity Sensor Driver - Support for new chips/variants to existing drivers Add AMD family 19h model 30h x86 match to amd_energy driver Add Zen3 Ryzen Desktop CPUs support to k10temp driver Add support for MAX16508 to max16601 driver Support revision "B" of max31785 Add support for ASRock boards to nct6683 driver - Driver removals (abx500) Decomission abx500 driver Various other minor fixes and improvements. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmAp+0kACgkQyx8mb86f mYGOCw//QEIrtGmHutRK+dvR64XAVfU6ygh8Jp7xgzlWzOmS8gJaA60Gm/MgsIjF rJC+zgzLenfGugyTR/rr8ZZ/awRyx70I+zWZ3cq6aGn8+ch2zKRn4W0sI9ol2XjP h1LElesRaQyHYSTxWVC9Q/2jyX3nibu+AJwTpDZtoOrE+X1KUCgsAA+cKKgHkhHd XpgUw7HMVtXm4EIX4+r7UDmjX3YIGtWQleXXqOn+4L7SQnO50DWipHAG593L42I/ 37cWbBzCRLDeHqXE5JG52LlR9KnxFG+fWs4BlNy/E0cDRE5SdDpjWILBlwqygkfp RsI8A4oAioCZ3qEoFTS0MmVIlq4fbRS13MogziYSEoHnYA5NDHFtDda7A9V7ahQv C4jN7z+d0AFEDcTFHZ7qhy7K9B1da8MdNhFbKC+8vIAj2b4t2z2l9ozpT+d74BmJ L3GbCtDHAwsXvDBJc+rngxH/ZG8Vksb3nQBRWgM/eGdVZweGwVJ9EvQLyTCCHGCr +D+5QPM3mf/binu6dDQ/o//f6nX7S3ww/aEAI8PLmr3amgJuaRVskGIId8XS0Myw GUWVxc3X47c3THIcdcSKjDOa2/YzLdhzJlQ07XC7NZIJHCgdfs4Y9tow5mBbToVQ Dqwkbned3nxFwQh095FDrUZiwraA6gO6Nxcl1n2KhIJcy5U27hI= =Spv2 -----END PGP SIGNATURE----- Merge tag 'hwmon-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers: - Texas Instruments TPS23861 driver - AHT10 Temperature and Humidity Sensor Driver Support for new chips/variants to existing drivers: - Add AMD family 19h model 30h x86 match to amd_energy driver - Add Zen3 Ryzen Desktop CPUs support to k10temp driver - Add support for MAX16508 to max16601 driver - Support revision "B" of max31785 - Add support for ASRock boards to nct6683 driver Driver removals: - Decomission abx500 driver Various other minor fixes and improvements" * tag 'hwmon-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (30 commits) MAINTAINERS: Add entry for Texas Instruments TPS23861 PoE PSE hwmon: add Texas Instruments TPS23861 driver dt-bindings: hwmon: Add TI TPS23861 bindings hwmon: (da9052) Switch to using the new API kobj_to_dev() hwmon: (amd_energy) Add AMD family 19h model 30h x86 match hwmon: (pmbus/max31785) Support revision "B" hwmon: (pmbus/lm25066) Remove unnecessary pmbus_clear_cache function call hwmon: (pmbus) Clear sensor data after chip write hwmon: (pmbus/max16601) Add support for MAX16508 hwmon: (pmbus/max16601) Determine and use number of populated phases hwmon: (pmbus) Simplify the calculation of variables hwmon: (aht10) Unlock on error in aht10_read_values() hwmon: (pwm-fan) stop using legacy PWM functions and some cleanups hwmon: Add AHT10 Temperature and Humidity Sensor Driver hwmon: (applesmc) Assign boolean values to a bool variable hwmon: (nct6683) Support ASRock boards hwmon: (aspeed-pwm-tacho) Switch to using the new API kobj_to_dev() hwmon: (max6650) Switch to using the new API kobj_to_dev() hwmon: (pwm-fan) Support multiple fan tachometers hwmon: (pwm-fan) Store tach data separately ... |
||
|
|
983e4adae0 |
platform-drivers-x86 for v5.12-1
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support
- Base / userspace API parts merged from Rafael's acpi-platform branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through merging
of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc. other fixes / new hw support / quirks
The following is an automated git shortlog grouped by driver:
ACPI:
- platform-profile: Fix possible deadlock in platform_profile_remove()
- platform-profile: Introduce object pointers to callbacks
- platform-profile: Drop const qualifier for cur_profile
- platform: Add platform profile support
Documentation:
- Add documentation for new platform_profile sysfs attribute
Documentation/ABI:
- sysfs-platform-ideapad-laptop: conservation_mode attribute
- sysfs-platform-ideapad-laptop: update device attribute paths
Kconfig:
- add missing selects for ideapad-laptop
MAINTAINERS:
- update email address for Henrique de Moraes Holschuh
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans:
- Merge remote-tracking branch 'linux-pm/acpi-platform' into review-hans
Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next:
- Merge tag 'ib-drm-gpio-pdx86-rtc-wdt-v5.12-1' into for-next
Move all dell drivers to their own subdirectory:
- Move all dell drivers to their own subdirectory
Platform:
- OLPC: Constify static struct regulator_ops
- OLPC: Specify the enable time
- OLPC: Remove dcon_rdev from olpc_ec_priv
- OLPC: Fix probe error handling
Revert "platform/x86:
- ideapad-laptop: Switch touchpad attribute to be RO"
acer-wmi:
- Don't use ACPI_EXCEPTION()
amd-pmc:
- put device on error paths
- Fix CONFIG_DEBUG_FS check
dell-wmi-sysman:
- fix a NULL pointer dereference
docs:
- driver-api: Add Surface Aggregator subsystem documentation
drm/gma500:
- Get rid of duplicate NULL checks
- Convert to use new SCU IPC API
gpio:
- msic: Remove driver for deprecated platform
- intel-mid: Remove driver for deprecated platform
hp-wmi:
- Disable tablet-mode reporting by default
- Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
i2c-multi-instantiate:
- Don't create platform device for INT3515 ACPI nodes
ideapad-laptop:
- add "always on USB charging" control support
- add keyboard backlight control support
- send notification about touchpad state change to sysfs
- fix checkpatch warnings, more consistent style
- change 'cfg' debugfs file format
- change 'status' debugfs file format
- check for touchpad support in _CFG
- check for Fn-lock support in HALS
- rework is_visible() logic
- rework and create new ACPI helpers
- group and separate (un)related constants into enums
- misc. device attribute changes
- always propagate error codes from device attributes' show() callback
- convert ACPI helpers to return -EIO in case of failure
- use dev_{err,warn} or appropriate variant to display log messages
- use msecs_to_jiffies() helper instead of hand-crafted formula
- use for_each_set_bit() helper to simplify event processing
- use kobj_to_dev()
- use device_{add,remove}_group
- use sysfs_emit()
- add missing call to submodule destructor
- sort includes lexicographically
- use appropriately typed variable to store the return value of ACPI methods
- remove unnecessary NULL checks
- remove unnecessary dev_set_drvdata() call
- DYTC Platform profile support
- Disable touchpad_switch for ELAN0634
intel-vbtn:
- Eval VBDL after registering our notifier
- Add alternative method to enable switches
- Create 2 separate input-devs for buttons and switches
- Rework wakeup handling in notify_handler()
- Drop HP Stream x360 Convertible PC 11 from allow-list
- Support for tablet mode on Dell Inspiron 7352
intel_mid_powerbtn:
- Remove driver for deprecated platform
- Remove driver for deprecated platform
intel_mid_thermal:
- Remove driver for deprecated platform
- Remove driver for deprecated platform
intel_pmt:
- Make INTEL_PMT_CLASS non-user-selectable
intel_pmt_crashlog:
- Add dependency on MFD_INTEL_PMT
intel_pmt_telemetry:
- Add dependency on MFD_INTEL_PMT
intel_scu_ipc:
- Increase virtual timeout from 3 to 5 seconds
intel_scu_wdt:
- Drop mistakenly added const
- Get rid of custom x86 model comparison
- Drop SCU notification
- Move driver from arch/x86
msi-wmi:
- Fix variable 'status' set but not used compiler warning
platform/surface:
- aggregator: Fix access of unaligned value
- Add Surface Hot-Plug driver
- surface3-wmi: Fix variable 'status' set but not used compiler warning
- aggregator: Fix braces in if condition with unlikely() macro
- aggregator: Fix kernel-doc references
- aggregator: fix a kernel-doc markup
- aggregator_cdev: Add comments regarding unchecked allocation size
- aggregator_cdev: Fix access of uninitialized variables
- fix potential integer overflow on shift of a int
- Add Surface ACPI Notify driver
- Add Surface Aggregator user-space interface
- aggregator: Add dedicated bus and device type
- aggregator: Add error injection capabilities
- aggregator: Add trace points
- aggregator: Add event item allocation caching
- aggregator: Add control packet allocation caching
- Add Surface Aggregator subsystem
- SURFACE_PLATFORMS should depend on ACPI
- surface_gpe: Fix non-PM_SLEEP build warnings
platform/x86/intel-uncore-freq:
- Add Sapphire Rapids server support
rtc:
- mrst: Remove driver for deprecated platform
sony-laptop:
- Remove unneeded semicolon
thinkpad_acpi:
- Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
- Fix 'warning: no previous prototype for' warnings
- Add platform profile support
- fixed warning and incorporated review comments
- rectify length of title underline
- Don't register keyboard_lang unnecessarily
- set keyboard language
- Add P53/73 firmware to fan_quirk_table for dual fan control
- correct palmsensor error checking
tools/power/x86/intel-speed-select:
- Update version to 1.8
- Add new command to get/set TRL
- Add new command turbo-mode
- Set higher of cpuinfo_max_freq or base_frequency
- Set scaling_max_freq to base_frequency
touchscreen_dmi:
- Add info for the Jumper EZpad 7 tablet
- Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
watchdog:
- intel-mid_wdt: Postpone IRQ handler registration till SCU is ready
- intel_scu_watchdog: Remove driver for deprecated platform
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmAqZ5cUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zmuwf/XLoZzs6oW7Ps9DhkyU5lk7D79rti
DY4AabVnWZhJ+Yl5+qMCTjC0R0nJYoq9PCDU5q20HHSFq7PXV0fPEVo7ZOp8tPng
wdzb2glbtGjSWksjj3c8eB/jjPP0tpsWptH+9jlTv9yXwQNVh/rPVltmD+z8y69U
qNzySltQMtoKmQKNbktUeHA12jBldnH+QlkL8KUp5ZEVDd7gukkmAovpzEcnwk5U
lrza7I52c9Ggu1pD2OCX7an9tk6N7mQ6Rk2/c6GzRsOYa6SC5Aj7fi2bs0LRdGGx
Kz/gtKS3dRIreEs4LGmL8byVi7a/YvCQoTfO+MxKq/btedBwxO2edDDsRg==
=B+Fz
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support:
- Base / userspace API parts merged from Rafael's acpi-platform
branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through
merging of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc other fixes / new hw support / quirks"
* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
platform/surface: aggregator: Fix access of unaligned value
tools/power/x86/intel-speed-select: Update version to 1.8
tools/power/x86/intel-speed-select: Add new command to get/set TRL
tools/power/x86/intel-speed-select: Add new command turbo-mode
Platform: OLPC: Constify static struct regulator_ops
platform/surface: Add Surface Hot-Plug driver
platform/x86: intel_scu_wdt: Drop mistakenly added const
platform/x86: Kconfig: add missing selects for ideapad-laptop
platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
platform/x86: Move all dell drivers to their own subdirectory
Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
platform/x86: ideapad-laptop: add "always on USB charging" control support
platform/x86: ideapad-laptop: add keyboard backlight control support
platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
...
|
||
|
|
bfa5782b9c |
fbdev: atyfb: add stubs for aty_{ld,st}_lcd()
Fix build errors when these functions are not defined. ../drivers/video/fbdev/aty/atyfb_base.c: In function 'aty_power_mgmt': ../drivers/video/fbdev/aty/atyfb_base.c:2002:7: error: implicit declaration of function 'aty_ld_lcd'; did you mean 'aty_ld_8'? [-Werror=implicit-function-declaration] 2002 | pm = aty_ld_lcd(POWER_MANAGEMENT, par); ../drivers/video/fbdev/aty/atyfb_base.c:2004:2: error: implicit declaration of function 'aty_st_lcd'; did you mean 'aty_st_8'? [-Werror=implicit-function-declaration] 2004 | aty_st_lcd(POWER_MANAGEMENT, pm, par); Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210222032853.21483-1-rdunlap@infradead.org |
||
|
|
20903032cd |
btrfs: avoid checking for RO block group twice during nocow writeback
During the nocow writeback path, we currently iterate the rbtree of block groups twice: once for checking if the target block group is RO with the call to btrfs_extent_readonly()), and once again for getting a nocow reference on the block group with a call to btrfs_inc_nocow_writers(). Since btrfs_inc_nocow_writers() already returns false when the target block group is RO, remove the call to btrfs_extent_readonly(). Not only we avoid searching the blocks group rbtree twice, it also helps reduce contention on the lock that protects it (specially since it is a spin lock and not a read-write lock). That may make a noticeable difference on very large filesystems, with thousands of allocated block groups. Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
|
3c17916510 |
btrfs: fix race between extent freeing/allocation when using bitmaps
During allocation the allocator will try to allocate an extent using
cluster policy. Once the current cluster is exhausted it will remove the
entry under btrfs_free_cluster::lock and subsequently acquire
btrfs_free_space_ctl::tree_lock to dispose of the already-deleted entry
and adjust btrfs_free_space_ctl::total_bitmap. This poses a problem
because there exists a race condition between removing the entry under
one lock and doing the necessary accounting holding a different lock
since extent freeing only uses the 2nd lock. This can result in the
following situation:
T1: T2:
btrfs_alloc_from_cluster insert_into_bitmap <holds tree_lock>
if (entry->bytes == 0) if (block_group && !list_empty(&block_group->cluster_list)) {
rb_erase(entry)
spin_unlock(&cluster->lock);
(total_bitmaps is still 4) spin_lock(&cluster->lock);
<doesn't find entry in cluster->root>
spin_lock(&ctl->tree_lock); <goes to new_bitmap label, adds
<blocked since T2 holds tree_lock> <a new entry and calls add_new_bitmap>
recalculate_thresholds <crashes,
due to total_bitmaps
becoming 5 and triggering
an ASSERT>
To fix this ensure that once depleted, the cluster entry is deleted when
both cluster lock and tree locks are held in the allocator (T1), this
ensures that even if there is a race with a concurrent
insert_into_bitmap call it will correctly find the entry in the cluster
and add the new space to it.
CC: <stable@vger.kernel.org> # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
|
04d4ba4c90 |
btrfs: make check_compressed_csum() to be subpage compatible
Currently check_compressed_csum() completely relies on sectorsize == PAGE_SIZE to do checksum verification for compressed extents. To make it subpage compatible, this patch will: - Do extra calculation for the csum range Since we have multiple sectors inside a page, we need to only hash the range we want, not the full page anymore. - Do sector-by-sector hash inside the page With this patch and previous conversion on btrfs_submit_compressed_read(), now we can read subpage compressed extents properly, and do proper csum verification. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
|
be6a13613f |
btrfs: make btrfs_submit_compressed_read() subpage compatible
For compressed read, we always submit page read using page size. This doesn't work well with subpage, as for subpage one page can contain several sectors. Such submission will read range out of what we want, and cause problems. Thankfully to make it subpage compatible, we only need to change how the last page of the compressed extent is read. Instead of always adding a full page to the compressed read bio, if we're at the last page, calculate the size using compressed length, so that we only add part of the range into the compressed read bio. Since we are here, also change the PAGE_SIZE used in lookup_extent_mapping() to sectorsize. This modification won't cause any functional change, as lookup_extent_mapping() can handle the case where the search range is larger than found extent range. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
|
d70cef0d46 |
btrfs: fix raid6 qstripe kmap
When a qstripe is required an extra page is allocated and mapped. There were 3 problems: 1) There is no corresponding call of kunmap() for the qstripe page. 2) There is no reason to map the qstripe page more than once if the number of bits set in rbio->dbitmap is greater than one. 3) There is no reason to map the parity page and unmap it each time through the loop. The page memory can continue to be reused with a single mapping on each iteration by raid6_call.gen_syndrome() without remapping. So map the page for the duration of the loop. Similarly, improve the algorithm by mapping the parity page just 1 time. Fixes: |
||
|
|
63e654f65d |
drm/i915/reg: add stream splitter configuration definitions
The splitter configuration is required for eDP MSO. Bspec: 50174 Cc: Nischal Varide <nischal.varide@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/443ad1fbf908800ee4e09315cb6a7ba26c64d136.1613054234.git.jani.nikula@intel.com |
||
|
|
de46dbe4b7 |
drm/i915/edp: read sink MSO configuration for eDP 1.4+
Read and debug log the eDP sink MSO configuration. Do not actually do anything with the information yet besides logging. FIXME: The pixel overlap is present in DisplayID 2.0, but we don't have parsing for that. Assume zero for now. We could also add quirks for non-zero pixel overlap before DisplayID 2.0 parsing. v3: Add placeholder for pixel overlap. v2: Rename intel_dp_mso_init -> intel_edp_mso_init Cc: Nischal Varide <nischal.varide@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/24ef61574e5af12cd86d5b85afbfbd4ac2f9de25.1613054234.git.jani.nikula@intel.com |
||
|
|
f886261735 |
drm/i915/edp: always add fixed mode to probed modes in ->get_modes()
Unconditionally add fixed mode to probed modes even if EDID is present and has modes. Prepare for cases where the fixed mode is not present in EDID (such as eDP MSO). Cc: Nischal Varide <nischal.varide@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6979f123f3e4ed948333f1b181202bbced3c3e85.1613054234.git.jani.nikula@intel.com |
||
|
|
8733932a72 |
drm/i915/edp: reject modes with dimensions other than fixed mode
Be more strict about filtering modes for eDP. Cc: Nischal Varide <nischal.varide@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/feb4c3b2b9c4da56a840bdb3c0e7fd0e58ee50de.1613054234.git.jani.nikula@intel.com |
||
|
|
c093056b67 |
drm/dp: add MSO related DPCD registers
Add DPCD register definitions for eDP 1.4 Multi-SST Operation. Cc: Nischal Varide <nischal.varide@intel.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Uma Shankar <uma.shankar@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ab57627f373ec4a80494bb51ea51080810d9bfb0.1613054234.git.jani.nikula@intel.com |
||
|
|
4ceddce55e |
loop: fix I/O error on fsync() in detached loop devices
There's an I/O error on fsync() in a detached loop device
if it has been previously attached.
The issue is write cache is enabled in the attach path in
loop_configure() but it isn't disabled in the detach path;
thus it remains enabled in the block device regardless of
whether it is attached or not.
Now fsync() can get an I/O request that will just be failed
later in loop_queue_rq() as device's state is not 'Lo_bound'.
So, disable write cache in the detach path.
Do so based on the queue flag, not the loop device flag for
read-only (used to enable) as the queue flag can be changed
via sysfs even on read-only loop devices (e.g., losetup -r.)
Test-case:
# DEV=/dev/loop7
# IMG=/tmp/image
# truncate --size 1M $IMG
# losetup $DEV $IMG
# losetup -d $DEV
Before:
# strace -e fsync parted -s $DEV print 2>&1 | grep fsync
fsync(3) = -1 EIO (Input/output error)
Warning: Error fsyncing/closing /dev/loop7: Input/output error
[ 982.529929] blk_update_request: I/O error, dev loop7, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
After:
# strace -e fsync parted -s $DEV print 2>&1 | grep fsync
fsync(3) = 0
Co-developed-by: Eric Desrochers <eric.desrochers@canonical.com>
Signed-off-by: Eric Desrochers <eric.desrochers@canonical.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Tested-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
||
|
|
1b6872fe1e |
drm/i915/display: Set source_support even if panel do not support PSR
This will set the right value of source_support when the port encoder/port supports PSR but sink don't. This change will also be needed in future for panel replay as psr struct needs to be initialized even if disconnected or current sink don't support PSR. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209181439.215104-4-jose.souza@intel.com |
||
|
|
3816139c8a |
drm/i915/display: Remove some redundancy around CAN_PSR()
If source_support is set the platform supports PSR so no need to check it again at every CAN_PSR(). Also removing the intel_dp_is_edp() calls, if sink_support is set the sink connected is for sure a eDP panel. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209181439.215104-3-jose.souza@intel.com |
||
|
|
774ab4ff15 |
drm/i915/display: Only write to register in intel_psr2_program_trans_man_trk_ctl()
There is no support for two pipes one transcoder for PSR and if we had that the current code should not use cpu_transcoder. Also I can't see a scenario where crtc_state->enable_psr2_sel_fetch is set and PSR is not enabled and if by a bug it happens PSR HW will just ignore any value in set in PSR2_MAN_TRK_CTL. So dropping all the rest and keeping the same behavior that we have with intel_psr2_program_plane_sel_fetch(). Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209181439.215104-2-jose.souza@intel.com |
||
|
|
a22af61d43 |
drm/i915/display: Rename for_each_intel_encoder.*_can_psr to for_each_intel_encoder.*_with_psr
for_each_intel_encoder.*_"can_psr" sounds strange, in my opinion "with_psr" is better. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209181439.215104-1-jose.souza@intel.com |
||
|
|
b3c15f78be |
spi: spi-ti-qspi: Free DMA resources
Release the RX channel and free the dma coherent memory when
devm_spi_register_master() fails.
Fixes:
|
||
|
|
be86c3fd26 |
regulator: mt6315: Return REGULATOR_MODE_INVALID for invalid mode
-EINVAL is not a valid return value for .of_map_mode, return REGULATOR_MODE_INVALID instead. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210215034813.45510-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
2979ef760e |
ASoC: rt1015: enable BCLK detection after calibration
Enable BCLK detection after calibration. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210222090057.29532-2-jack.yu@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
7fb08871c3 |
ASoC: rt1015: fix i2c communication error
Remove 0x100 cache re-sync to solve i2c communication error. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20210222090057.29532-1-jack.yu@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
9a9dd7e473 |
pwm: lpc18xx-sct: remove unneeded semicolon
Eliminate the following coccicheck warning: ./drivers/pwm/pwm-lpc18xx-sct.c:292:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> |
||
|
|
28208c7b4a |
pwm: iqs620a: Correct a stale state variable
If duty cycle is first set to a value that is sufficiently high to enable the output (e.g. 10000 ns) but then lowered to a value that is quantized to zero (e.g. 1000 ns), the output is disabled as the device cannot drive a constant zero (as expected). However if the device is later re-initialized due to watchdog bite, the output is re-enabled at the next-to-last duty cycle (10000 ns). This is because the iqs620_pwm->out_en flag unconditionally tracks state->enabled instead of what was actually written to the device. To solve this problem, use one state variable that encodes all 257 states of the output (duty_scale) with 0 representing tri-state, 1 representing the minimum available duty cycle and 256 representing 100% duty cycle. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> |
||
|
|
72d6b2459d |
pwm: iqs620a: Fix overflow and optimize calculations
If state->duty_cycle is 0x100000000000000, the previous calculation of
duty_scale overflows and yields a duty cycle ratio of 0% instead of
100%. Fix this by clamping the requested duty cycle to the maximal
possible duty cycle first. This way it is possible to use a native
integer division instead of a (depending on the architecture) more
expensive 64bit division.
With this change in place duty_scale cannot be bigger than 256 which
allows to simplify the calculation of duty_val.
Fixes:
|
||
|
|
ffe9aa48d9 |
drm/i915/display: Allow PSR2 selective fetch to be enabled at run-time
Right now CI is blacklisting module reload, so we need to be able to enable PSR2 selective fetch in run time to test this feature before enable it by default. Changes in IGT will also be needed. v2: - Fixed handling of I915_PSR_DEBUG_ENABLE_SEL_FETCH in intel_psr_debug_set() Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209205036.351076-1-jose.souza@intel.com |
||
|
|
6b09b4d33b |
block: fix potential IO hang when turning off io_poll
QUEUE_FLAG_POLL flag will be cleared when turning off 'io_poll', while at that moment there may be IOs stuck in hw queue uncompleted. The following polling routine won't help reap these IOs, since blk_poll() will return immediately because of cleared QUEUE_FLAG_POLL flag. Thus these IOs will hang until they finnaly time out. The hang out can be observed by 'fio --engine=io_uring iodepth=1', while turning off 'io_poll' at the same time. To fix this, freeze and flush the request queue first when turning off 'io_poll'. Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
|
b357e4a694 |
block: get rid of the trace rq insert wrapper
Get rid of the wrapper for trace_block_rq_insert() and call the function directly. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> |