Since sleepable programs don't migrate from the cpu the excution stats can be
computed for them as well. Reuse the same infrastructure for both sleepable and
non-sleepable programs.
run_cnt -> the number of times the program was executed.
run_time_ns -> the program execution time in nanoseconds including the
off-cpu time when the program was sleeping.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-4-alexei.starovoitov@gmail.com
In older non-RT kernels migrate_disable() was the same as preempt_disable().
Since commit 74d862b682 ("sched: Make migrate_disable/enable() independent of RT")
migrate_disable() is real and doesn't prevent sleeping.
Running sleepable programs with migration disabled allows to add support for
program stats and per-cpu maps later.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-3-alexei.starovoitov@gmail.com
Move bpf_prog_stats from prog->aux into prog to avoid one extra load
in critical path of program execution.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-2-alexei.starovoitov@gmail.com
Since 3234ac664a ("/dev/mem: Revoke mappings when a driver claims
the region") /dev/kmem zaps PTEs when the kernel requests exclusive
acccess to an iomem region. And with CONFIG_IO_STRICT_DEVMEM, this is
the default for all driver uses.
Except there are two more ways to access PCI BARs: sysfs and proc mmap
support. Let's plug that hole.
For revoke_devmem() to work we need to link our vma into the same
address_space, with consistent vma->vm_pgoff. ->pgoff is already
adjusted, because that's how (io_)remap_pfn_range works, but for the
mapping we need to adjust vma->vm_file->f_mapping. The cleanest way is
to adjust this at at ->open time:
- for sysfs this is easy, now that binary attributes support this. We
just set bin_attr->mapping when mmap is supported
- for procfs it's a bit more tricky, since procfs PCI access has only
one file per device, and access to a specific resource first needs
to be set up with some ioctl calls. But mmap is only supported for
the same resources as sysfs exposes with mmap support, and otherwise
rejected, so we can set the mapping unconditionally at open time
without harm.
A special consideration is for arch_can_pci_mmap_io() - we need to
make sure that the ->f_mapping doesn't alias between ioport and iomem
space. There are only 2 ways in-tree to support mmap of ioports: generic
PCI mmap (ARCH_GENERIC_PCI_MMAP_RESOURCE), and sparc as the single
architecture hand-rolling. Both approaches support ioport mmap through a
special PFN range and not through magic PTE attributes. Aliasing is
therefore not a problem.
The only difference in access checks left is that sysfs PCI mmap does
not check for CAP_RAWIO. I'm not really sure whether that should be
added or not.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210204165831.2703772-3-daniel.vetter@ffwll.ch
We are already doing this for all the regular sysfs files on PCI
devices, but not yet on the legacy io files on the PCI buses. Thus far
no problem, but in the next patch I want to wire up iomem revoke
support. That needs the vfs up and running already to make sure that
iomem_get_mapping() works.
Wire it up exactly like the existing code in
pci_create_sysfs_dev_files(). Note that pci_remove_legacy_files()
doesn't need a check since the one for pci_bus->legacy_io is
sufficient.
An alternative solution would be to implement a callback in sysfs to
set up the address space from iomem_get_mapping() when userspace calls
mmap(). This also works, but Greg didn't really like that just to work
around an ordering issue when the kernel loads initially.
v2: Improve commit message (Bjorn)
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210205133632.2827730-1-daniel.vetter@ffwll.ch
- Clock control logic for LPC snoop driver
- New system ids for AST2600 variants
-----BEGIN PGP SIGNATURE-----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=1Yka
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/drivers
ASPEED soc driver updates for 5.12
- Clock control logic for LPC snoop driver
- New system ids for AST2600 variants
* tag 'aspeed-5.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
soc: aspeed: socinfo: Add new systems
soc: aspeed: snoop: Add clock control logic
Link: https://lore.kernel.org/r/CACPK8Xf+4VkWC6rkHhsWdwhaLjy2Az=GAHaEe=SvOiUc_OGKSQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The system would deadlock when swapping to a dm-crypt device. The reason
is that for each incoming write bio, dm-crypt allocates memory that holds
encrypted data. These excessive allocations exhaust all the memory and the
result is either deadlock or OOM trigger.
This patch limits the number of in-flight swap bios, so that the memory
consumed by dm-crypt is limited. The limit is enforced if the target set
the "limit_swap_bios" variable and if the bio has REQ_SWAP set.
Non-swap bios are not affected becuase taking the semaphore would cause
performance degradation.
This is similar to request-based drivers - they will also block when the
number of requests is over the limit.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Allow removal of CONFIG_BLK_DEV_ZONED conditionals in target_type
definition of various targets.
Suggested-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-linear and dm-flakey obviously can pass through inline crypto support.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Now that device mapper supports inline encryption, add the ability to
evict keys from all underlying devices. When an upper layer requests
a key eviction, we simply iterate through all underlying devices
and evict that key from each device.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Update the device-mapper core to support exposing the inline crypto
support of the underlying device(s) through the device-mapper device.
This works by creating a "passthrough keyslot manager" for the dm
device, which declares support for encryption settings which all
underlying devices support. When a supported setting is used, the bio
cloning code handles cloning the crypto context to the bios for all the
underlying devices. When an unsupported setting is used, the blk-crypto
fallback is used as usual.
Crypto support on each underlying device is ignored unless the
corresponding dm target opts into exposing it. This is needed because
for inline crypto to semantically operate on the original bio, the data
must not be transformed by the dm target. Thus, targets like dm-linear
can expose crypto support of the underlying device, but targets like
dm-crypt can't. (dm-crypt could use inline crypto itself, though.)
A DM device's table can only be changed if the "new" inline encryption
capabilities are a (*not* necessarily strict) superset of the "old" inline
encryption capabilities. Attempts to make changes to the table that result
in some inline encryption capability becoming no longer supported will be
rejected.
For the sake of clarity, key eviction from underlying devices will be
handled in a future patch.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Introduce blk_ksm_update_capabilities() to update the capabilities of
a keyslot manager (ksm) in-place. The pointer to a ksm in a device's
request queue may not be easily replaced, because upper layers like
the filesystem might access it (e.g. for programming keys/checking
capabilities) at the same time the device wants to replace that
request queue's ksm (and free the old ksm's memory). This function
allows the device to update the capabilities of the ksm in its request
queue directly. Devices can safely update the ksm this way without any
synchronization with upper layers *only* if the updated (new) ksm
continues to support all the crypto capabilities that the old ksm did
(see description below for blk_ksm_is_superset() for why this is so).
Also introduce blk_ksm_is_superset() which checks whether one ksm's
capabilities are a (not necessarily strict) superset of another ksm's.
The blk-crypto framework requires that crypto capabilities that were
advertised when a bio was created continue to be supported by the
device until that bio is ended - in practice this probably means that
a device's advertised crypto capabilities can *never* "shrink" (since
there's no synchronization between bio creation and when a device may
want to change its advertised capabilities) - so a previously
advertised crypto capability must always continue to be supported.
This function can be used to check that a new ksm is a valid
replacement for an old ksm.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The device mapper may map over devices that have inline encryption
capabilities, and to make use of those capabilities, the DM device must
itself advertise those inline encryption capabilities. One way to do this
would be to have the DM device set up a keyslot manager with a
"sufficiently large" number of keyslots, but that would use a lot of
memory. Also, the DM device itself has no "keyslots", and it doesn't make
much sense to talk about "programming a key into a DM device's keyslot
manager", so all that extra memory used to represent those keyslots is just
wasted. All a DM device really needs to be able to do is advertise the
crypto capabilities of the underlying devices in a coherent manner and
expose a way to evict keys from the underlying devices.
There are also devices with inline encryption hardware that do not
have a limited number of keyslots. One can send a raw encryption key along
with a bio to these devices (as opposed to typical inline encryption
hardware that require users to first program a raw encryption key into a
keyslot, and send the index of that keyslot along with the bio). These
devices also only need the same things from the keyslot manager that DM
devices need - a way to advertise crypto capabilities and potentially a way
to expose a function to evict keys from hardware.
So we introduce a "passthrough" keyslot manager that provides a way to
represent a keyslot manager that doesn't have just a limited number of
keyslots, and for which do not require keys to be programmed into keyslots.
DM devices can set up a passthrough keyslot manager in their request
queues, and advertise appropriate crypto capabilities based on those of the
underlying devices. Blk-crypto does not attempt to program keys into any
keyslots in the passthrough keyslot manager. Instead, if/when the bio is
resubmitted to the underlying device, blk-crypto will try to program the
key into the underlying device's keyslot manager.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Metadata resize shouldn't happen in the ctr. The ctr loads a temporary
(inactive) table that will only become active upon resume. That is why
resize should always be done in terms of resume. Otherwise a load (ctr)
whose inactive table never becomes active will incorrectly resize the
metadata.
Also, perform the resize directly in preresume, instead of using the
worker to do it.
The worker might run other metadata operations, e.g., it could start
digestion, before resizing the metadata. These operations will end up
using the old size.
This could lead to errors, like:
device-mapper: era: metadata_digest_transcribe_writeset: dm_array_set_value failed
device-mapper: era: process_old_eras: digest step failed, stopping digestion
The reason of the above error is that the worker started the digestion
of the archived writeset using the old, larger size.
As a result, metadata_digest_transcribe_writeset tried to write beyond
the end of the era array.
Fixes: eec40579d8 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
We use the assigned slot in io_sqe_file_register(), and a previous
patch moved the assignment to after we have called it. This isn't
super pretty, and will get cleaned up in the future. For now, fix
the regression by restoring the previous assignment/clear of the
file_slot.
Fixes: ea64ec02b3 ("io_uring: deduplicate file table slot calculation")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a test for the perf daemon 'lock' command ensuring only one instance
of daemon can run over one base directory.
Committer testing:
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 793255
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [793506]'
signal 12 sent to session 'test [793506]'
test daemon ping
test daemon lock
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-25-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for the perf daemon 'ping' command. The tests verifies the
ping command gets proper answer from sessions.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 792143
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [792415]'
signal 12 sent to session 'test [792415]'
test daemon ping
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-24-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for the perf daemon 'signal' command. The test sends a signal
to configured sessions and verifies the perf data files were generated
accordingly.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 790017
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [790268]'
signal 12 sent to session 'test [790268]'
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for the perf daemon 'stop' command. The test stops the daemon
and verifies all the configured sessions are properly terminated.
Committer testing:
[root@five ~]# time perf test daemon
76: daemon operations : Ok
[root@five ~]# time perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 788560
test daemon list
test daemon reconfig
test daemon stop
test child finished with 0
---- end ----
daemon operations: Ok
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for daemon reconfiguration. The test changes the
configuration file and checks that the session is changed properly.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]# time perf test daemon
76: daemon operations : Ok
real 0m6.055s
user 0m0.174s
sys 0m0.147s
[root@five ~]# time perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 786863
test daemon list
test daemon reconfig
test child finished with 0
---- end ----
daemon operations: Ok
real 0m6.127s
user 0m0.222s
sys 0m0.165s
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test for basic perf daemon listing via the CSV output mode (-x
option).
Check that the configured sessions display expected values.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]#
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 785037
test daemon list
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add usage examples to the man page.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the 'stop' control command to stop perf record session. If that
fails, fall back to current SIGTERM/SIGKILL pair.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a 'ping' command to verify that the 'perf record' session is up and
operational.
It's used in the following patches via test code to make sure 'perf
record' is ready to receive signals.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
Start the daemon:
# perf daemon start
Ping all sessions:
# perf daemon ping
OK cycles
OK sched
Ping specific session:
# perf daemon ping --session sched
OK sched
Committer notes:
Fixed up bug pointed by clang:
Buggy:
if (!pollfd.revents & POLLIN)
Correct code:
if (!(pollfd.revents & POLLIN))
clang warning:
builtin-daemon.c:560:6: error: logical not is only applied to the left hand side of this bitwise operator [-Werror,-Wlogical-not-parentheses]
if (!pollfd.revents & POLLIN) {
^ ~
builtin-daemon.c:560:6: note: add parentheses after the '!' to evaluate the bitwise operator first
Also use designated initialized with pollfd, i.e.:
struct pollfd pollfd = { .events = POLLIN, };
Instead of:
struct pollfd pollfd = { 0, };
To get past:
builtin-daemon.c:510:30: error: missing field 'events' initializer [-Werror,-Wmissing-field-initializers]
struct pollfd pollfd = { 0, };
^
1 error generated.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 'lock' file under daemon base and flock it, so only one perf daemon
can run on top of it.
Each daemon tries to create and lock BASE/lock file, if it's successful
we are sure we're the only daemon running over the BASE.
Once daemon is finished, file descriptor to lock file is closed and lock
is released.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
Starting the daemon:
# perf daemon start
And try once more:
# perf daemon start
failed: another perf daemon (pid 775594) owns /opt/perfdata
will end up with an error, because there's already one running
on top of /opt/perfdata.
Committer notes:
Provide lockf(F_TLOCK) when not available, i.e. transform:
lockf(fd, F_TLOCK, 0);
into:
flock(fd, LOCK_EX | LOCK_NB);
Which should be equivalent.
Noticed when cross building to some odd Android NDK.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is safer to disable the QSPI IP at suspend, in order to avoid
possible impact of glitches on the internal FSMs. This is a theoretical
fix, there were no problems seen as of now. Tested on sama5d2 and
sam9x60 versions of the IP.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210210135428.204134-1-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By default the PCA9450 doesn't handle the assertion of the WDOG_B
signal, but this is required to guarantee that things like software
resets triggered by the watchdog work reliably.
As we don't want to rely on the bootloader to enable this, we tell
the PMIC to issue a cold reset in case the WDOG_B signal is
asserted (WDOG_B_CFG = 10), just as the NXP U-Boot code does.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210211105534.38972-3-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
LDO5 has two separate control registers. LDO5CTRL_L is used if the
input signal SD_VSEL is low and LDO5CTRL_H if it is high.
The current driver implementation only uses LDO5CTRL_H. To make this
work on boards that have SD_VSEL connected to a GPIO, we add support
for specifying an optional GPIO and setting it to high at probe time.
In the future we might also want to add support for boards that have
SD_VSEL set to a fixed low level. In this case we need to change the
driver to be able to use the LDO5CTRL_L register.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210211105534.38972-1-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm LPASS (Low Power Audio SubSystem) has internal codec
TX macro block which is used for connecting with external
Soundwire TX Codecs like WCD938x.
This patch adds support to the codec part of the TX Macro block
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210211122735.5691-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This binding is for LPASS has internal codec TX macro which is
for connecting with Soundwire TX codecs like WCD938x.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210211122735.5691-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
LPASS RX Codec Macro is available in Qualcomm LPASS (Low Power Audio SubSystem).
This is used for connecting with SoundWire devices like WCD938x Codecs to provide
headphone/ear/lineout functionality.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210211122735.5691-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This binding is for LPASS has internal codec RX macro which is
for connecting with SoundWire RX codecs like WCD938x.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210211122735.5691-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
An endpoint is not a device and it is recommended to use clocks property
in the device node. Hence reverting the original change.
Fixes: 531e5b7abb ("ASoC: audio-graph-card: Add clocks property to endpoint node")
Suggested-by: Rob Herring <robh@kernel.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1612939421-19900-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If "clocks = <&xxx>" is specified from the CPU or Codec component
device node, the clock is not getting enabled. Thus audio playback
or capture fails.
Fix this by populating "simple_dai->clk" field when clocks property
is specified from device node as well. Also tidy up by re-organising
conditional statements of parsing logic.
Fixes: bb6fc620c2 ("ASoC: simple-card-utils: add asoc_simple_card_parse_clk()")
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1612939421-19900-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the correct name to avoid ldo7 commands being sent to ldo6's address.
Fixes: 06369bcc15 ("regulator: qcom-rpmh: Add support for SM8150")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210211034935.5622-1-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a 2 byte pad to struct compat_vcpu_info so that the sum size of its
fields is actually 64 bytes. The effective size without the padding is
also 64 bytes due to the compiler aligning evtchn_pending_sel to a 4-byte
boundary, but depending on compiler alignment is subtle and unnecessary.
Opportunistically replace spaces with tables in the other fields.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-6-seanjc@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow the 'perf daemon' to send SIGUSR2 to all running sessions or just
to a specific session.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
Start the daemon:
# perf daemon start
Send signal to all running sessions:
# perf daemon signal
signal 12 sent to session 'cycles [773738]'
signal 12 sent to session 'sched [773739]'
Or to specific one:
# perf daemon signal --session sched
signal 12 sent to session 'sched [773739]'
And verify signals were delivered and perf.data dumped:
# cat /opt/perfdata/session-cycles/output
rounding mmap pages size to 32M (8192 pages)
[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2021010220382490 ]
# car /opt/perfdata/session-sched/output
rounding mmap pages size to 32M (8192 pages)
[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2021010220382489 ]
[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2021010220393745 ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a 'list' command to display all running sessions. It's the default
command if no other command is specified.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
Start the daemon:
# perf daemon start
List sessions:
# perf daemon
[771394:daemon] base: /opt/perfdata
[771395:cycles] perf record -m 10M -e cycles --overwrite --switch-output -a
[771396:sched] perf record -m 20M -e sched:* --overwrite --switch-output -a
List sessions with more info:
# perf daemon -v
[771394:daemon] base: /opt/perfdata
output: /opt/perfdata/output
[771395:cycles] perf record -m 10M -e cycles --overwrite --switch-output -a
base: /opt/perfdata/session-cycles
output: /opt/perfdata/session-cycles/output
[771396:sched] perf record -m 20M -e sched:* --overwrite --switch-output -a
base: /opt/perfdata/session-sched
output: /opt/perfdata/session-sched/output
The 'output' file is perf record output for specific session.
Note you have to stop all running perf processes manually at this point,
stop command is coming in following patches.
Committer notes:
Fixup union initialization to overcome this in multiple older systems:
22 15.74 debian:8 : FAIL gcc version 4.9.2 (Debian 4.9.2-10+deb8u2)
builtin-daemon.c: In function 'send_cmd_list':
builtin-daemon.c:1386:2: error: missing initializer for field 'csv_sep' of 'struct <anonymous>' [-Werror=missing-field-initializers]
};
^
builtin-daemon.c:641:8: note: 'csv_sep' declared here
char csv_sep;
^
cc1: all warnings being treated as errors
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use a signalfd fd to track SIGCHLD signals as notifications for perf
session termination.
This way we don't need to actively check for child status, being
notified if there's change.
Suggested-by: Alexei Budankov <abudankov@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to put the daemon process in the background.
It's now enabled by default and -f option is added to keep the daemon
process on the console for debugging.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to detect changes to the daemon's config file triggering a
re-read of the configuration when that happens.
Use a inotify file descriptor plugged into the main fdarray object for
polling.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
Starting the daemon:
# perf daemon start
Check sessions:
# perf daemon
[772262:daemon] base: /opt/perfdata
[772263:cycles] perf record -m 10M -e cycles --overwrite --switch-output -a
Change '-m 10M' to '-m 20M', and check daemon log:
# tail -f /opt/perfdata/output
[2021-01-02 20:31:41.234045] daemon started (pid 772262)
[2021-01-02 20:31:41.235072] reconfig: ruining session [cycles:772263]: -m 10M -e cycles --overwrite --switch-output -a
[2021-01-02 20:32:08.310137] reconfig: session 'cycles' killed
[2021-01-02 20:32:08.310847] reconfig: ruining session [cycles:772338]: -m 20M -e cycles --overwrite --switch-output -a
And the session list:
# perf daemon
[772262:daemon] base: /opt/perfdata
[772338:cycles] perf record -m 20M -e cycles --overwrite --switch-output -a
Note the changed '-m 20M' option is in place.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding support to configure daemon with config file.
Each client or server invocation of perf daemon needs to know the
base directory, where all sessions data is stored.
The base is defined with:
daemon.base
Base path for daemon data. All sessions data are stored under
this path.
The daemon allows to create record sessions. Each session is a
record command spawned and monitored by perf daemon.
The session is defined with:
session-<NAME>.run
Defines new record session for daemon. The value is record's
command line without the 'record' keyword.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
The example above defines '/opt/perfdata' as the base directory and 2
record sessions.
# perf daemon start
[2021-01-28 19:47:33.454413] daemon started (pid 16015)
[2021-01-28 19:47:33.455910] reconfig: ruining session [cycles:16016]: -m 10M -e cycles --overwrite --switch-output -a
[2021-01-28 19:47:33.456599] reconfig: ruining session [sched:16017]: -m 20M -e sched:* --overwrite --switch-output -a
# ps -ef | grep perf
... perf daemon start
... /home/jolsa/.../perf record -m 20M -e cycles --overwrite --switch-output -a
... /home/jolsa/.../perf record -m 20M -e sched:* --overwrite --switch-output -a
The base directory is populated with:
# find /opt/perfdata/
/opt/perfdata/
/opt/perfdata/control <- control socket
/opt/perfdata/session-cycles <- data for session 'cycles':
/opt/perfdata/session-cycles/output <- perf record output
/opt/perfdata/session-cycles/perf.data <- perf data
/opt/perfdata/session-sched <- ditto for session 'sched'
/opt/perfdata/session-sched/output
/opt/perfdata/session-sched/perf.data
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't bother mapping the Xen shinfo pages into the guest, they don't need
to be accessed using the GVAs and passing a define with "GPA" in the name
to addr_gva2hpa() is confusing.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-5-seanjc@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>