Commit graph

1,169,205 commits

Author SHA1 Message Date
Suman Anna
5ab931402a dt-bindings: irqchip: Add node name to PRUSS INTC
The current PRUSS Interrupt Controller binding doesn't exactly specify
the convention for the node name. These interrupt-controllers will always
have a unit address. Update the binding with the '$nodename' using the
expected generic name, this shall ensure the interrupt-controller.yaml
is automatically applied to this binding.

Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210126163251.29468-1-s-anna@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
2021-02-09 11:57:15 -06:00
Tom Zanussi
8b5ab6bd0b tracing: Add a backward-compatibility check for synthetic event creation
The synthetic event parsing rework now requires semicolons between
synthetic event fields.  That requirement breaks existing users who
might already have used the old synthetic event command format, so
this adds an inner loop that can parse more than one field, if
present, between semicolons.  For each field, parse_synth_field()
checks in which version that field was introduced, using
check_field_version().  The caller, __create_synth_event() can then use
that version information to determine whether or not to enforce the
requirement on the command as a whole.

In the future, if/when new features are added, the requirement will be
that any field/string containing the new feature must use semicolons,
and the check_field_version() check can then check for those and
enforce it.  Using a version number allows this scheme to be extended
if necessary.

Link: https://lkml.kernel.org/r/74fcc500d561b40ce91c5ee94818c70c6b0c9330.1612208610.git.zanussi@kernel.org

[ zanussi: added check_field_version() comment from rostedt@goodmis.org ]
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-09 12:52:15 -05:00
Tom Zanussi
8d3e816523 tracing: Update synth command errors
Since array types are handled differently, errors referencing them
also need to be handled differently.  Add and use a new
INVALID_ARRAY_SPEC error.  Also add INVALID_CMD and INVALID_DYN_CMD to
catch and display the correct form for badly-formed commands, which
can also be used in place of CMD_INCOMPLETE, which is removed, and
remove CMD_TOO_LONG, since it's no longer used.

Link: https://lkml.kernel.org/r/b9dd434dc6458dcff11adc6ed616fe93a8794770.1612208610.git.zanussi@kernel.org

Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-09 12:52:15 -05:00
Tom Zanussi
c9e759b1e8 tracing: Rework synthetic event command parsing
Now that command parsing has been delegated to the create functions
and we're no longer constrained by argv_split(), we can modify the
synthetic event command parser to better match the higher-level
structure of the synthetic event commands, which is basically an event
name followed by a set of semicolon-separated fields.

Since we're also now passed the raw command, we can also save it
directly and can get rid of save_cmdstr().

Link: https://lkml.kernel.org/r/cb9e2be92d992ce59f2b4f132264a5d467f3933f.1612208610.git.zanussi@kernel.org

Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-09 12:52:15 -05:00
Masami Hiramatsu
d262271d04 tracing/dynevent: Delegate parsing to create function
Delegate command parsing to each create function so that the
command syntax can be customized.

This requires changes to the kprobe/uprobe/synthetic event handling,
which are also included here.

Link: https://lkml.kernel.org/r/e488726f49cbdbc01568618f8680584306c4c79f.1612208610.git.zanussi@kernel.org

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ zanussi@kernel.org: added synthetic event modifications ]
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-09 12:52:15 -05:00
Masami Hiramatsu
33b1d14668 kprobes: Warn if the kprobe is reregistered
Warn if the kprobe is reregistered, since there must be
a software bug (actively used resource must not be re-registered)
and caller must be fixed.

Link: https://lkml.kernel.org/r/161236436734.194052.4058506306336814476.stgit@devnote2

Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-09 12:44:32 -05:00
Jinyang He
a1320e0c2f ftrace: Remove unused ftrace_force_update()
ftrace_force_update() is committed by Commit e1c08bdd9f ("ftrace: force
recording") and removed by Commit cb7be3b2fc ("ftrace: remove daemon").
Remove it in header file.

Link: https://lkml.kernel.org/r/1612409671-8249-1-git-send-email-hejinyang@loongson.cn

Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-09 12:43:42 -05:00
Aakash Hemadri
6953026f21 staging: rtl8712: Remove multiple blank lines
Fix checkpatch.pl CHECK:
CHECK: Please don't use multiple blank lines

Signed-off-by: Aakash Hemadri <aakashhemadri123@gmail.com>
Link: https://lore.kernel.org/r/20210209153709.128676-1-aakashhemadri123@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-09 18:42:16 +01:00
Phillip Potter
62301f3a15 staging: rtl8723bs: remove typedefs from rtl8723b_recv.h
Remove typedefs from include/rtl8723b_recv.h and convert one usage in
hal/rtl8723bs_recv.c to use the actual structure name in its pointer
declaration. Fixes two checkpatch warnings.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210209141051.4739-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-09 18:42:16 +01:00
Suman Anna
b9ddb2500e hwspinlock: omap: Add support for K3 AM64x SoCs
The AM64x SoC contains a HwSpinlock IP instance in the MAIN domain,
and is a minor variant of the IP on the current TI K3 SoCs such as
AM64x, J721E or J7200 SoCs. The IP is not built with the K3 safety
feature in hardware, and has slightly different integration into
the overall SoC.

Add the support for this IP through a new compatible.

Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210209172240.2305-3-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-09 11:36:50 -06:00
Suman Anna
387db89ca0 dt-bindings: hwlock: Update OMAP HwSpinlock binding for AM64x SoCs
Update the existing OMAP HwSpinlock binding to include the info for
AM64x SoCs. There are some minor IP integration differences between
the AM64x SoCs and the previous AM65x and J721E SoC families.

Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210209172240.2305-2-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-09 11:36:25 -06:00
Steven Rostedt (VMware)
7211f0a257 tracepoints: Code clean up
Restructure the code a bit to make it simpler, fix some formatting problems
and add READ_ONCE/WRITE_ONCE to make sure there's no compiler load/store
tearing to the variables that can be accessed across CPUs.

Started with Mathieu Desnoyers's patch:

  Link: https://lore.kernel.org/lkml/20210203175741.20665-1-mathieu.desnoyers@efficios.com/

And will keep his signature, but I will take the responsibility of this
being correct, and keep the authorship.

Link: https://lkml.kernel.org/r/20210204143004.61126582@gandalf.local.home

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-09 12:27:29 -05:00
Darrick J. Wong
8e8794b919 xfs: fix rst syntax error in admin guide
Tables are supposed to have a matching line of "===" to signal the end
of a table.  The rst compiler gets grouchy if it encounters EOF instead,
so fix this warning.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
2021-02-09 09:16:44 -08:00
Steven Rostedt (VMware)
d9a1be1be3 tracepoints: Do not punish non static call users
With static calls, a tracepoint can call the callback directly if there is
only one callback registered to that tracepoint. When there is more than
one, the static call will call the tracepoint's "iterator" function, which
needs to reload the tracepoint's "funcs" array again, as it could have
changed since the first time it was loaded.

But an arch without static calls is punished by having to load the
tracepoint's "funcs" array twice. Once in the DO_TRACE macro, and once
again in the iterator macro.

For archs without static calls, there's no reason to load the array macro
in the first place, since the iterator function will do it anyway.

Change the __DO_TRACE_CALL() macro to do the load and call of the
tracepoints funcs array only for architectures with static calls, and just
call the iterator function directly for architectures without static calls.

Link: https://lkml.kernel.org/r/20210208201050.909329787@goodmis.org

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-09 12:16:27 -05:00
Steven Rostedt (VMware)
1746fd4416 tracepoints: Remove unnecessary "data_args" macro parameter
While working on a clean up that would restructure the difference between
architectures that have static calls vs those that do not, I was stumbling
over the "data_args" parameter that includes "__data" in the arguments. The
issue was that one version didn't even need it, while the other one did.
Instead of injecting a "__data = NULL;" into the macro for the unneeded
version, just remove it completely.

The original idea behind data_args is that there may be a case of a
tracepoint with no arguments. But this is considered bad practice, and all
tracepoints should pass something to that location (that's what tracepoints
were created for).

Link: https://lkml.kernel.org/r/20210208201050.768074128@goodmis.org

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-09 12:16:27 -05:00
Arnd Bergmann
74d60e2e93 Actions Semi ARM DT changes for v5.12:
Updates to the existing S500 ARM SoC. Support has been added for CMU (Clock
 Management Unit), Reset controller, DMA, Pinctrl/GPIO, MMC, I2C and SIRQ
 (interrupt controller). Since the CMU support is added, the dummy fixed clock
 used for the UART controller has been removed for all S500 based boards and
 proper UART clock from CMU is used.
 
 Added uSD support and I2C pinctrl configuration for Roseapplepi board based on
 S500 SoC. This will make the board boot mainline with a distro from uSD card.
 The I2C pinctrl config is added specifically for the PMIC which is currently
 under review.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmAczwYACgkQVZ8R5v6R
 zvXTugf/bR50Fmvp7pjlWJsEHZbkrvFpSw7SPJ8d6oKQc5lpq+vP4SuJM9Om+MQk
 ZLI7pzoOPNbSRqkklA8Mw9YbM8fZh+9pklp659mxyNwTIEKID72Cw/HB4E51gS5K
 Vrv1A4V8M70guNAYVIjSaCkenSJdEVSQPqsLmu4kl8Na9yK+6JoFO226Si9d6amU
 HYCz5WC3LN83wTz+XW23h1rUnZ8xZBRfsNwrZmNy8wIvbcRiKP31u70veeksrfDg
 LCT5umxlMIisEgq3tY1s6KoavhQpq/0XIntD9iSL5xPiuP6QAOgXwdnwtWNsjGYZ
 nldCUQof2Gme1aRL0DuuH4TLkvOjLA==
 =awis
 -----END PGP SIGNATURE-----

Merge tag 'actions-arm-dt-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt

Actions Semi ARM DT changes for v5.12:

Updates to the existing S500 ARM SoC. Support has been added for CMU (Clock
Management Unit), Reset controller, DMA, Pinctrl/GPIO, MMC, I2C and SIRQ
(interrupt controller). Since the CMU support is added, the dummy fixed clock
used for the UART controller has been removed for all S500 based boards and
proper UART clock from CMU is used.

Added uSD support and I2C pinctrl configuration for Roseapplepi board based on
S500 SoC. This will make the board boot mainline with a distro from uSD card.
The I2C pinctrl config is added specifically for the PMIC which is currently
under review.

* tag 'actions-arm-dt-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
  arm: dts: owl-s500-roseapplepi: Add I2C pinctrl configuration
  arm: dts: owl-s500-roseapplepi: Add uSD support
  arm: dts: owl-s500: Add SIRQ controller
  arm: dts: owl-s500: Add I2C support
  arm: dts: owl-s500: Add MMC support
  arm: dts: owl-s500: Add pinctrl & GPIO support
  arm: dts: owl-s500: Add DMA controller
  arm: dts: owl-s500: Add Reset controller
  arm: dts: owl-s500: Set CMU clocks for UARTs
  arm: dts: owl-s500: Add Clock Management Unit

Link: https://lore.kernel.org/r/20210205050346.GA7619@thinkpad
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09 18:05:28 +01:00
Arnd Bergmann
60c9579a01 i.MX arm64 device tree update for 5.12:
- New board support: Beacon i.MX8M Nano development kit, i.MX8MM Nitrogen,
   Gateworks i.MX 8M Mini Development Kits, phyBOARD-Pollux-i.MX8MP,
   Librem5 Evergreen.
 - Update imx8mm-beacon to drop unused clock-names reference, and add
   more pinctrl states for USDHC1.
 - Support soc unique ID read with NVMEM on i.MX8M SoCs.
 - A series from Biwen Li to add interrupt line for RTC device on
   Layerscape SoCs.
 - A couple of patch sets to update imx8mq-librem5 support around
   regulators, RTC, charger, display, etc.
 - A series from Joakim Zhang to improve i.MX8M FEC device configuration.
 - A series from Kuldeep Singh to enable flexcan support for LX2160A and
   LS1028A.
 - A series from Lucas Stach to update ZII devices around audio, USB, I2C
   pin configuration and UCS1002 ALERT.
 - A series from Michael Walle to update Layerscape device trees to use
   constants in the clockgen phandle, add sl28 variant 1 and enable SATA.
 - A few patches from Russell King to improve support for a couple of
   LX2160A boards.
 - A series from Shengjiu Wang to add more audio support for imx8mn-evk.
 - Other small and random updates.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmAboLUUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM7uogf8CiWlrW3nvc/IQczBsgqr0QpFFVY/
 z5Le9xqsIa7ZEdA2tVryi8IyH4BSrpwPANk2aGgb2L9Ktjs8N8KC+RnQ2OZrIyDk
 m3dY0lnAYcfYFVUyJDVQHz4AJLHHfbMRjT25NRrxrUVSXxaPbaFlLlk1bT+TCTNx
 lPavxy+ch60JYET85ZYgM9A1mqKfhAxNMr7JNJODWjoQTNDQy88K2zymVYYaZZ0p
 2xMJ7dnuNleAdU3ndaG3K7G9hv0SlfAlR+TdKzgYTE7S0e4W6phwH37Nu3XnT3SY
 ToBqv/qSx1Hv1LAuLTMAWIOZiKoOVq1kqdgMR7d1+gsKi6QlIPGC92BvFw==
 =ajVN
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt64-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.12:

- New board support: Beacon i.MX8M Nano development kit, i.MX8MM Nitrogen,
  Gateworks i.MX 8M Mini Development Kits, phyBOARD-Pollux-i.MX8MP,
  Librem5 Evergreen.
- Update imx8mm-beacon to drop unused clock-names reference, and add
  more pinctrl states for USDHC1.
- Support soc unique ID read with NVMEM on i.MX8M SoCs.
- A series from Biwen Li to add interrupt line for RTC device on
  Layerscape SoCs.
- A couple of patch sets to update imx8mq-librem5 support around
  regulators, RTC, charger, display, etc.
- A series from Joakim Zhang to improve i.MX8M FEC device configuration.
- A series from Kuldeep Singh to enable flexcan support for LX2160A and
  LS1028A.
- A series from Lucas Stach to update ZII devices around audio, USB, I2C
  pin configuration and UCS1002 ALERT.
- A series from Michael Walle to update Layerscape device trees to use
  constants in the clockgen phandle, add sl28 variant 1 and enable SATA.
- A few patches from Russell King to improve support for a couple of
  LX2160A boards.
- A series from Shengjiu Wang to add more audio support for imx8mn-evk.
- Other small and random updates.

* tag 'imx-dt64-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits)
  arm64: dts: imx: Add i.mx8mm nitrogen basic dts support
  arm64: dts: zii-rmb3: enable RMI4 reduced reporting
  arm64: dts: zii-ultra: only trigger IRQ on falling edge ucs1002 ALERT pin
  arm64: dts: zii-ultra: limit USB ports to USB2 speed
  arm64: dts: zii-ultra: fix i2c pin configuration
  arm64: dts: zii-ultra: add sound support
  arm64: dts: ls1028a: Enable flexcan support for LS1028A-RDB/QDS
  arm64: dts: ls1028a: Update flexcan properties
  arm64: dts: lx2160a: Add flexcan support
  arm64: dts: fsl-ls1012a-frdm: add spi-uart device
  arm64: dts: fsl-ls1012a-rdb: add i2c devices
  arm64: dts: imx8mn-beacon-som: Enable QSPI on SOM
  arm64: dts: imx8mn: Add fspi node
  arm64: dts: Add Librem5 Evergreen
  arm64: dts: imx8mq-librem5: set regulators boot-on
  arm64: dts: imx8mq-librem5: enable the LCD panel
  arm64: dts: imx8mq-librem5: Add LCD_1V8 regulator
  arm64: dts: imx8mq-librem5: Add usb-c chip as supplier for the charger
  arm64: dts: imx8mq-librem5: Don't mark buck3 as always on
  arm64: dts: imx8mq-librem5: Mark charger IRQ as High-Z
  ...

Link: https://lore.kernel.org/r/20210204120150.26186-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09 18:03:39 +01:00
Arnd Bergmann
48a60549d2 i.MX device tree change for 5.12:
- A series from Oleksij Rempel to add i.MX6 based Plymovent, Protonic
   and Kverneland boards.
 - A series from Andreas Kemnade to improve UART support for ebook
   readers.
 - A series from Fabio Estevam to update imx6ul-14x14-evk device tree for
   adding GPIO expander and camera support.
 - A patch set from Lucas Stach to improve ZII RDU2 support, enabling
   WDOG, tuning I2C drive-strength, RMI4 and UCS1002 ALERT.
 - Other small and random updates on various boards.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmAbmf8UHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM5xXwgAlGHKq/arFxIkQf0xUcJzLhJ9FcDl
 CpNz77cosCXERcoVpRgTYWGk1ElnYutyNMkUzSrhXdZ80ieL5UMF/RAZYaGJO38f
 NLCN5Rv5w1i4z/J8GGhqASgZ13Pized6jcEuvd8EYwVNkRX+ErcKszkmjWit42RL
 cgRtdBhqAmEwshNjtki5PbFRj7YxWuC6Tsf4OUyXmm4S/+sqcaTvLuQWq/AeEzqJ
 5vN1H6RFqfZR+C2vumW/Yq4bkRlFQllELcoTPPrixm2ZvvZbLs7I56HZub9yom9i
 c4GCfcSgMEXjmuB3h7NmMNyPCyvSVLN3bNseYADX9PnrBzP4HFRW1IsAhg==
 =DmjV
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX device tree change for 5.12:

- A series from Oleksij Rempel to add i.MX6 based Plymovent, Protonic
  and Kverneland boards.
- A series from Andreas Kemnade to improve UART support for ebook
  readers.
- A series from Fabio Estevam to update imx6ul-14x14-evk device tree for
  adding GPIO expander and camera support.
- A patch set from Lucas Stach to improve ZII RDU2 support, enabling
  WDOG, tuning I2C drive-strength, RMI4 and UCS1002 ALERT.
- Other small and random updates on various boards.

* tag 'imx-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
  ARM: dts: imx6: RDU2: adjust audio devices nomenclature
  ARM: dts: imx6: RDU2: only trigger IRQ on falling edge ucs1002 ALERT pin
  ARM: dts: imx6: RDU2: enable RMI4 reduced reporting
  ARM: dts: imx6: RDU2: reduce i2c drive-strength
  ARM: dts: imx6: rdu2: enable WDOG1
  ARM: dts: imx6-sr-som: increase at8035 PHY gigabit Tw parameter
  ARM: dts: imx6: add wakeup support via magic packet
  firmware: imx: select SOC_BUS to fix firmware build
  arm64: dts: imx8mp: Correct the gpio ranges of gpio3
  ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
  ARM: dts: imx: e60k02: add second uart
  ARM: dts: imx6sl-tolino-shine3: correct console uart pinmux
  ARM: dts: imx6sl-tolino-shine2hd: add second uart
  ARM: dts: imx6sl-tolino-shine2hd: correct console uart pinmux
  ARM: imx: build suspend-imx6.S with arm instruction set
  ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
  ARM: dts: add Kverneland TGO board
  ARM: dts: add Kverneland UT1, UT1Q and UT1P
  ARM: dts: imx6ul-14x14-evk: Add camera support
  ARM: dts: imx6ul-14x14-evk: Describe the KSZ8081 reset
  ...

Link: https://lore.kernel.org/r/20210204120150.26186-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09 18:01:42 +01:00
Christoph Hellwig
81d88ce550 dma-mapping: remove the {alloc,free}_noncoherent methods
It turns out allowing non-contigous allocations here was a rather bad
idea, as we'll now need to define ways to get the pages for mmaping
or dma_buf sharing.  Revert this change and stick to the original
concept.  A different API for the use case of non-contigous allocations
will be added back later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>:wq
2021-02-09 18:01:38 +01:00
Arnd Bergmann
6f771ce6c3 i.MX DT bindings update for 5.12:
- Various board compatible additions to fsl.yaml.
 - Add vendor prefix for Plymovent and Kverneland Group.
 - Update simple panel bindings to include compatible for EDT and Kyocera
   panels.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmAbkBwUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM4URwf/eqq0o2OGsnzXqVgydcPUpRmwwdcC
 gO/1yQh7LKllOGLxIoobEaFE749M9e7sd9KReIFaPYYfMEqkxRb6aACBTcSeNSoD
 qfvUUYRJSpnIGccZd24OLsHXC3MdMf97jnI0fAUuvNoRm+MUdVDU99DOYC3UMjo7
 1YV2PQAOS3EVad52nWJmAQ/1GbAfJ/A+KdP++NyZShnicLgM34WqOIWzbfx5Z4MO
 uKP0nm+bktZK5xTnNoxJBhdY48P9JWWZof2S1SmUM8EjHThozfZtu8U+ryr6FxZ3
 N+TgyPVoFeurpRjLSYNWzGp/NwYl0JxRmfWJ7n+21f6ZjpvAuYgc5T2aDg==
 =dj6O
 -----END PGP SIGNATURE-----

Merge tag 'imx-bindings-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings update for 5.12:

- Various board compatible additions to fsl.yaml.
- Add vendor prefix for Plymovent and Kverneland Group.
- Update simple panel bindings to include compatible for EDT and Kyocera
  panels.

* tag 'imx-bindings-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: imx: add imx8mm nitrogen support
  dt-bindings: arm: fsl: Add the librem 5 Evergreen revision
  dt-bindings: arm: fsl: add Kverneland TGO board
  dt-bindings: arm: fsl: add Kverneland UT1, UT1Q and UI1P boards
  dt-bindings: vendor-prefixes: Add an entry for Kverneland Group
  dt-bindings: arm: fsl: add Kontron sl28 variant 1
  bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings
  dt-bindings: arm: fsl: add Protonic PRTI6G board
  dt-bindings: arm: fsl: add Protonic MVT board
  dt-bindings: arm: fsl: Add binding for Gateworks boards with IMX8MM
  dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID
  dt-bindings: arm: fsl: add Plymovent BAS board
  dt-bindings: arm: fsl: add Plymovent M2M board
  dt-bindings: vendor-prefixes: Add an entry for Plymovent
  dt-bindings: display: simple: Add Kyocera tcg070wvlq panel
  dt-bindings: display: simple: add EDT compatibles already supported by the driver
  dt-bindings: display: simple: fix alphabetical order for EDT compatibles
  dt-bindings: arm: fsl: Add beacon,imx8mn-beacon-kit

Link: https://lore.kernel.org/r/20210204120150.26186-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09 17:59:58 +01:00
Ronnie Sahlberg
abd4af47d3 cifs: fix dfs-links
This fixes a regression following dfs links that was introduced in the
patch series for the new mount api.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-02-09 10:59:52 -06:00
Arnd Bergmann
b7976dcf36 Qualcomm ARM dts updates for 5.12
Introduces the Qualcomm SDX55 platform and the platform's MTP device,
 with support for NAND, SDHCI and USB.
 
 USB is enabled for IPQ4019 and the Alfa Network AP120C-AC and 8devices
 Jalapeno boards are added.
 
 Samsung Galaxy S5 gains display and GPU support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmAbg3wbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F2vgQALuFNVI0qXgkJC6cPNlB
 nIBlJdV87ED4cRlHZsDsryIKNEqIVLFDVPScqDeCGgPT+kJeHdxo1NsN770nw6ZX
 NkGGplJ/N/sNBHVqcPCHaGgWI7U1NPnUkqwZCrlnaIWTr8xj8YQgC73bKwb1f++Z
 NoQNoaKRE7mcsq+WrFWGpbeXKlM9Ww2/6TITeL5UQcZHMNbuOdKxo0muoAoOJ0do
 ysr/94VgwddWmmp3FFEdtn5vyMOhyM06BENzkggV8ouwrmuD2L23QQhNXKEFw70P
 6mC07Bb8H75u+nfFRWO9BvygguyaYhHr2cM7pyXSCsdIsz/yXlpQg4O3C+8Z8DPy
 lLPjwsesK9sl6jBh4lWEHM78zSHDyf6QSSm/1FKfhwhOu21FhWdJAPYTBGAtE7yr
 PPEKpZKPljApBjvz9nYxT+MvK0fmZx2WUsgAKb+KCKyEftNKE5x9uI45eaAmWgaf
 RMqb1Ivt7/FkxNI4EsPW04Iba7iYS4TugbKylX9rU+pzVbN/VmYTAPrFwz4kKyAE
 +HXaCCZ+sts2v9jiEShgbOgQPS9XY05mz59EpawT7Kr7mq8y/Xx5vb6zQ6Tg8N2/
 Wms87RhyS29muabhghutMoicOWRFy1HQbZS/LxFxfjNBuvnMdDmaFvbufbGeBvfo
 eYjmIm/1wb7Jg18z2c+kcd0b
 =7Ft3
 -----END PGP SIGNATURE-----

Merge tag 'qcom-dts-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM dts updates for 5.12

Introduces the Qualcomm SDX55 platform and the platform's MTP device,
with support for NAND, SDHCI and USB.

USB is enabled for IPQ4019 and the Alfa Network AP120C-AC and 8devices
Jalapeno boards are added.

Samsung Galaxy S5 gains display and GPU support.

* tag 'qcom-dts-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (38 commits)
  ARM: dts: qcom: msm8974-klte: Mark essential regulators
  ARM: dts: qcom: msm8974-klte: add support for display
  ARM: dts: qcom: msm8974-klte: add support for GPU
  ARM: dts: qcom: msm8974: add gpu support
  ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO node
  ARM: dts: qcom: replace status value "ok" by "okay"
  ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi
  ARM: dts: qcom: remove commented mmc-ddr-1_8v for sdcc3
  ARM: dts: qcom: add Alfa Network AP120C-AC
  ARM: dts: qcom: add 8devices Jalapeno
  ARM: dts: qcom: ipq4019: add more labels
  ARM: dts: qcom: ipq4019: add USB devicetree nodes
  ARM: dts: qcom: add prng definition to ipq806x
  ARM: dts: qcom: sdx55: Add pshold support
  ARM: dts: qcom: sdx55: Add Watchdog support
  dt-bindings: watchdog: Add binding for Qcom SDX55
  ARM: dts: qcom: sdx55-mtp: Enable USB3 and PHY support
  ARM: dts: qcom: sdx55: Add USB3 and PHY support
  dt-bindings: usb: qcom,dwc3: Add binding for SDX55
  ARM: dts: qcom: msm8974-klte: Fix shdc numbering
  ...

Link: https://lore.kernel.org/r/20210204052320.388999-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09 17:56:58 +01:00
Arnd Bergmann
8a2b1ec170 Qualcomm ARM64 DT updates for 5.12
This introduces initial support for the new SM8350 platform, aka
 Snapdragon 888, and the MTP device for this.
 
 It adds PCIe, audio, display, GPU, HDMI watchdog, LLCC and PMIC ADC
 support to the SM8250 platform and RB5 in particular, as well as improve
 the definition of CPUs, thermal zones and fixes a few smaller issues.
 
 It introduces new Devicetree files for the Alcatel Idol 3, ASUS Zenfone
 2 Laser and BQ Aquaris X5, based on the MSM8916 platform.
 
 It contains an overhaul of the existing MSM8992 and MSM8994 platform
 files and introduces RPM power domains and SMP2P nodes. It adds
 touchscreen, additional regulators, microSD card support and adds the
 Sony Mobile Ivy, Karin, Suzuran and Satsuki devices. It joins the common
 parts of the Lumia 950 and 950XL and extend these with support for
 sensors, NFC, bluetooth, audio, microSD and Type-C mux pins.
 
 It introduces support for the OnePlus6 and 6t, adds the missing higher
 frequences for the SDM850 laptops, adds CPU cluster idle support on
 SM8150  and a few tweaks to the SC7180 platform.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmAbgxEbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FWIMP/1gLzNp/vtxtFA+7Wjud
 r6ozd10p6yRWRtw3bSpaa4kifhIY9zK/Ca45Oj+k8Mm3vIngtT6hZJ6kJmc0Y0J/
 cVKm65Th6Tn0RUTHTGhqX+2ug80RfKbr1NgPyY1n1ukH30dMJwC50qOMEwahFtyV
 IafH8j+AD1KgA/ceP1ENxtyywZGDaM5N2DAEPrzX8auTvO6VPLBrIhPMv63iupGU
 nBmExlAxYAPZXaNVG0fZUMmx6ciGqg1yBo31F5Pso5LaeFD79vg2AnRaCXs4i8ve
 mR1cM5s3TYMJpe9gJmoNBHN8ngkgbqsh+tnn2S3yQBSMT6QTdwyzvSkXpF8CNeRp
 6vXDpcJ2G1gJyxS0SmmYxKA2wTZEcpq4il/MZ2WSY8s71Z5jecSddsQdKVoYtSIg
 9W9V3aihjKX8NN+Ko2O4usuKTVmcrNHqwO5zQPQ9unxpG5FSXbRmIVAuEXJmN+3t
 doKXKdlUmvAV4tqkz39aHsRs8nGr5ZO6VEaKgB3OIgzxcd/aWL+pNTMN4QufCh9b
 umdCnWY6mtJCFcLEDjTxE3WdfzCK8Se/7E77Ohe1BS39NWB5UCw0PDfL12yOZg0q
 Spj93z2ZnzbkygkGtuKN+jxmnJ4Z6viykdcchy7c77VPvEIBfABlOc06sdAbfY6d
 GMNVvEE965FPI669C7NOd3Ly
 =ATeF
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DT updates for 5.12

This introduces initial support for the new SM8350 platform, aka
Snapdragon 888, and the MTP device for this.

It adds PCIe, audio, display, GPU, HDMI watchdog, LLCC and PMIC ADC
support to the SM8250 platform and RB5 in particular, as well as improve
the definition of CPUs, thermal zones and fixes a few smaller issues.

It introduces new Devicetree files for the Alcatel Idol 3, ASUS Zenfone
2 Laser and BQ Aquaris X5, based on the MSM8916 platform.

It contains an overhaul of the existing MSM8992 and MSM8994 platform
files and introduces RPM power domains and SMP2P nodes. It adds
touchscreen, additional regulators, microSD card support and adds the
Sony Mobile Ivy, Karin, Suzuran and Satsuki devices. It joins the common
parts of the Lumia 950 and 950XL and extend these with support for
sensors, NFC, bluetooth, audio, microSD and Type-C mux pins.

It introduces support for the OnePlus6 and 6t, adds the missing higher
frequences for the SDM850 laptops, adds CPU cluster idle support on
SM8150  and a few tweaks to the SC7180 platform.

* tag 'qcom-arm64-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (100 commits)
  arm64: dts: qcom: msm8998: Use rpmpd definitions for opp table levels
  arm64: dts: qcom: msm8996: Add missing device_type under pcie[01]
  arm64: dts: qcom: sc7180: Add support for gpu fuse
  arm64: dts: qcom: msm8998: Disable some components by default
  arm64: dts: qcom: msm8998: Add capacity-dmips-mhz to CPU cores
  arm64: dts: qcom: msm8998: Add I2C pinctrl and fix BLSP2_I2C naming
  arm64: dts: qcom: msm8998: Add DMA to I2C hosts
  arm64: dts: qcom: msm8998: Merge in msm8998-pins.dtsi to msm8998.dtsi
  arm64: dts: msm8916: Fix reserved and rfsa nodes unit address
  arm64: dts: qcom: msm8994-octagon: Add AD7147 and APDS9930 sensors
  arm64: dts: qcom: msm8994-octagon: Add TAS2553 codec
  arm64: dts: qcom: msm8994-octagon: Add sensors on blsp1_i2c5
  arm64: dts: qcom: msm8994-octagon: Add NXP NFC node
  arm64: dts: qcom: msm8994-octagon: Add FM Radio and DDR regulator nodes
  arm64: dts: qcom: msm8994-octagon: Configure PON keys
  arm64: dts: qcom: msm8994-octagon: Configure Lattice iCE40 FPGA
  arm64: dts: qcom: msm8994-octagon: Add uSD card and disable HS400 on eMMC
  arm64: dts: qcom: msm8994-octagon: Configure HD3SS460 Type-C mux pins
  arm64: dts: qcom: msm8994-octagon: Add QCA6174 bluetooth
  arm64: dts: qcom: msm8994-octagon: Configure regulators
  ...

Link: https://lore.kernel.org/r/20210204052043.388621-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09 17:53:44 +01:00
Arnd Bergmann
79e3faa756 arm64: dts: amlogic updates for v5.12
- new board: Hardkernel ODROID-HC4 (SoC: SM1)
 - new board: Beelink GS-King-X (SoC: S922X)
 - shorten shorten audio card names for alsa compatibility
 - misc cleanups & fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAmAhb0cACgkQWTcYmtP7
 xmUaDxAAkTEf5HKBzM84v+medj4bYnG2hf4U45gxSiOsgMNSOrRn4kywcyhNigsr
 10WTJYCHfO2JNUiFPzm4SO/44+v/N7ClWrQVhoKe70+qFI3tcNxrFCvQAaHnvSRL
 GBHvfcUAIe0ZhDJxWYjnv26PehRmEaxYlSYUIbEvvqL0/RjV2HpYwqYtXdLeS50K
 eTP4iY0IVcabscgsTBunGzC7Q0BOpN5FPR/yknnLMsXDC31WKR1xwRw6kWiyv5Zs
 p0TLOjpzqXIDxzKnbkod3bTwLLh2Qjt7yZj5Q8llJuDy5Y+rUdNyj/JndhnYtJfs
 m4H5fYAhXcbFip5v/10NVVyNwg2keNKbg2XrCD0p7aO6SY8B4a83whDfWOhaAjQt
 wsCtW8tNwruH6hJZd9nHo67H1H83Bo/ymGzUbBw7dmD8gWDwCfeACSi9ZMSSyO+T
 8EWXS4G2dQnghnLcozfMI22YpD03hzQV6n2KFaOoPPmrhkZ+o3vfsBpOcu6mxw+r
 NS3gtMBBIay6Ca8zOBmIFjvIjZBbPKihCiMz1xNFlGLea6u1ILrFa0dAVWsiF43K
 MgFtvoBvOhfg3DbIpBfYTVSg+jPLKcOUhcEfMnJ2k6cDiWjxbkq9NFWYLJXou9EQ
 twZvdDwZwLQPAUknOLgUmolqVs3zXzRopBjlpFqzXxGZ8pXl5yo=
 =Hmzm
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: amlogic updates for v5.12
- new board: Hardkernel ODROID-HC4 (SoC: SM1)
- new board: Beelink GS-King-X (SoC: S922X)
- shorten shorten audio card names for alsa compatibility
- misc cleanups & fixes

* tag 'amlogic-dt64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson: add initial device-tree for ODROID-HC4
  dt-bindings: arm: amlogic: add ODROID-HC4 bindings
  arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi
  arm64: dts: meson: sort Amlogic dtb Makefile
  dt-bindings: arm: amlogic: sort SM1 bindings
  arm64: dts: meson: fix broken wifi node for Khadas VIM3L
  arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to ODROID-N2 dtsi
  ARM: dts: meson: add the AO ARC remote processor
  dt-bindings: Amlogic: add the documentation for the SECBUS2 registers
  dt-bindings: sram: Add compatible strings for the Meson AO ARC SRAM
  arm64: dts: meson: shorten audio card names for alsa compatibility
  arm64: dts: meson: add initial Beelink GS-King-X device-tree
  dt-bindings: arm: amlogic: add support for the Beelink GS-King-X
  arm64: dts: meson: Fix schema warnings for pwm-leds
  arm64: dts: meson: vim3: whitespace fixups
  arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
  Revert "arm64: dts: amlogic: add missing ethernet reset ID"
  arm64: dts: amlogic: meson-g12: Set FL-adj property value

Link: https://lore.kernel.org/soc/7heehq7ag3.fsf@baylibre.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09 17:51:33 +01:00
Arnd Bergmann
02bb4cb4c4 ARM: dts: amlogic updates for v5.12
- add thermal zones with cooling configuration
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAmAa9fgACgkQWTcYmtP7
 xmU+Mg/9HEEEaD8Z5f0Fwv4U5DMC0RjmXgtsiZqGfNd2laG0FAPzq4eaTdwDybtQ
 VZBmmjx9FfO8oCW/gm3UGqBVOOxuZ1F/OFGd5DeHnKaevgJC2E3+x2jrunwzoeiI
 nUMyRd660WGqTvZDq74YLUJcenFBUN/5jTeefGW/ZDx/xgTFWA+k2d62yXi6C8jG
 p1CuggxbDMe+wmgcicDqVGnAm9j7uNYlS7zlWiVDcuMjJLxhMBnpHpYy+XAS/Bu4
 X9dRCY683OtpmZNkG25wjKk0VPdu+RrBW5HlARBO7FWOWx03CzX3jMCnQkCwF1cV
 pfBfTvCc/nG3JAvxpsziwo6jb1ZKcAud3i8AYb9qQrhT26VtqHV+kJPUiUPSvX+t
 p5XYD9ZDaMa1zT+cKzs+YBSRn/hnuTgZw419IXoVd+iELw9dYODIekj/lJSm5rNS
 DnAl+cukueFriDArZkxBfWVA3fRBu8vJDfdgZTILUZQplvSsyMn0y470wh9+znrD
 srIZ3bnbGEcA/RgVX27WlxmTycLvnwwIZ7slwheEbNKlj70w/ZON+5Vv1aNkIJzq
 q1437QzZ6wRKE9voX8LITs9oiZqh2CRQ34QN+WxQvhPhPdsl+kVRLTXNXOZ3SSvC
 JWHNJRJ8l+VP7vkb+JRbRnJ3ETw6ZeG1AylDtplcMLrlrqBL40k=
 =Q9GJ
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: amlogic updates for v5.12
- add thermal zones with cooling configuration

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: add the thermal-zones with cooling configuration
  ARM: dts: meson8: add the thermal-zones with cooling configuration
  ARM: dts: meson: add the ADC thermal sensor to meson.dtsi
  ARM: dts: meson: move iio-hwmon for the SoC temperature to meson.dtsi

Link: https://lore.kernel.org/r/7ho8h12bto.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09 17:48:04 +01:00
Arnd Bergmann
638f79778d arm64: dts: ZynqMP DT changes for v5.12
- Wire clock chips present on boards
 - Enable reset, qspi, nand, watchdog and DP IPs
 - Enable phy driver for sata and DP
 - Add iommu description
 - Add support for zcu104 revC+ boards
 
 - Various small changes
   - Add missing labels
   - Fix typos in documentation
   - Add missing boards
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYBqk0gAKCRDKSWXLKUoM
 ITbRAKCO+l2ziOzd6ACzNEGAxFtdSPLp3ACfShjLzq0OiHdRFrYhen77PRPJ51Q=
 =nICr
 -----END PGP SIGNATURE-----

Merge tag 'zynqmp-dt-for-v5.12' of https://github.com/Xilinx/linux-xlnx into arm/dt

arm64: dts: ZynqMP DT changes for v5.12

- Wire clock chips present on boards
- Enable reset, qspi, nand, watchdog and DP IPs
- Enable phy driver for sata and DP
- Add iommu description
- Add support for zcu104 revC+ boards

- Various small changes
  - Add missing labels
  - Fix typos in documentation
  - Add missing boards

* tag 'zynqmp-dt-for-v5.12' of https://github.com/Xilinx/linux-xlnx:
  arm64: dts: zynqmp: Wire up the DisplayPort subsystem
  arm64: dts: zynqmp: Add DisplayPort subsystem
  arm64: dts: zynqmp: Add DPDMA node
  dt-bindings: arm: Fix typo in zcu111 board
  arm64: dts: zynqmp: Add description for zcu104 revC
  arm64: dts: zynqmp: Add missing iommu IDs
  arm64: dts: zynqmp: Add missing lpd watchdog node
  arm64: dts: zynqmp: Wire zynqmp qspi controller
  arm64: dts: zynqmp: Wire arasan nand controller
  arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis
  arm64: dts: zynqmp: Add label for zynqmp_ipi
  arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
  arm64: dts: zynqmp: Enable reset controller driver
  arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
  arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106
  arm64: dts: zynqmp: Fix u48 si5382 chip on zcu111
  arm64: dts: zynqmp: Add address-cells property to interrupt controllers

Link: https://lore.kernel.org/r/b1a6f89e-f6b4-757b-daf0-d2f1844b833d@xilinx.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09 17:46:48 +01:00
Arnd Bergmann
f3d8876aca Samsung DTS ARM changes for v5.12
1. Use new compatile to properly configure Exynos5420 USB2 PHY, fixing
    it suspend/resume cycle.
 2. Correct Samsung PMIC interrupt trigger levels on multiple boards.
 3. Correct the voltages of Samsung GT-I9100 charger and add top-off
    charger.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmAPBPwQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1/86EACTikCRiKfmsWp7mEjhiCXsC5qEO1JOzzF5
 HM2zrqRtaET4hneBzdmhTVU1dkgXq84ai+gf3Q/JkyWerjne16v4qHmahyiM/pBF
 hWOdyp1WLDh767JL4aWLIk54BNpWqUBo+bDbHMH9xn77MeoaWDNAnnIxNdHKYPQV
 hKS1jqbI50S1juK2ZOn1Bpcw5n1xgELwlCT0gkOKDOIQW1vQljHvyXuRuvFf8Ck+
 ohG5EsBErHtTQr2Ws/zFB1uTnc5BTMEUeiVBrTEQam+yGzd/jmEtFnYFQL4/eZoQ
 jwGGp2uHILHHt1twcTm3AH1yuo3RiRrR0bbVitqS21D1AdyBcngU5LpmRbExjSrJ
 Tt4j9AaMSeGWqFTSvnxneSfyROILAhUwnJWs3CN1R2I9MHkArHmnxoLOntylcphe
 gjWVhe7BBkLvcN7YXeuMWMwI4AwzGvBn4xXTyyhUpAiffIXtRLO7d6HdxzWjTb/B
 svIbOUyvsDUwgtfu+4KinG11dbLSTTrn2D9LtbZOS/whzweOGzEOreUrm209qMpi
 ve2nXELvrLdkLEF3Ax3ooQIm6V98Or6ecydwg57DdZ/Lqu690B5KlSx0JArWjMwB
 L4aNCCWfYDdy6YMabUsG9lxfBx7RyfdifWGK5KXf/xAOG1vONpSpg7x6wHhmm4de
 Zwh7ABIjWw==
 =Jgo7
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.12

1. Use new compatile to properly configure Exynos5420 USB2 PHY, fixing
   it suspend/resume cycle.
2. Correct Samsung PMIC interrupt trigger levels on multiple boards.
3. Correct the voltages of Samsung GT-I9100 charger and add top-off
   charger.

* tag 'samsung-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Add top-off charging regulator node for I9100
  ARM: dts: exynos: Fix charging regulator voltage and current for I9100
  ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid XU3 family
  ARM: dts: exynos: correct PMIC interrupt trigger level on Arndale Octa
  ARM: dts: exynos: correct PMIC interrupt trigger level on Spring
  ARM: dts: exynos: correct PMIC interrupt trigger level on Rinato
  ARM: dts: exynos: correct PMIC interrupt trigger level on Monk
  ARM: dts: exynos: correct PMIC interrupt trigger level on Artik 5
  ARM: dts: exynos: use Exynos5420 dedicated USB2 PHY compatible

Link: https://lore.kernel.org/r/20210125191240.11278-3-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09 17:46:12 +01:00
Christian König
ed89fff973 drm/ttm: drop sysfs directory
Not used any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-3-christian.koenig@amd.com
2021-02-09 17:28:01 +01:00
Christian König
f07069da6b drm/ttm: move memory accounting into vmwgfx v4
This is just another feature which is only used by VMWGFX, so move
it into the driver instead.

I've tried to add the accounting sysfs file to the kobject of the drm
minor, but I'm not 100% sure if this works as expected.

v2: fix typo in KFD and avoid 64bit divide
v3: fix init order in VMWGFX
v4: use pdev sysfs reference instead of drm

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zackr@vmware.com> (v3)
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-2-christian.koenig@amd.com
2021-02-09 17:27:33 +01:00
Christian König
d4bd7776a7 drm/ttm: rework ttm_tt page limit v4
TTM implements a rather extensive accounting of allocated memory.

There are two reasons for this:
1. It tries to block userspace allocating a huge number of very small
   BOs without accounting for the kmalloced memory.

2. Make sure we don't over allocate and run into an OOM situation
   during swapout while trying to handle the memory shortage.

This is only partially a good idea. First of all it is perfectly
valid for an application to use all of system memory, limiting it to
50% is not really acceptable.

What we need to take care of is that the application is held
accountable for the memory it allocated. This is what control
mechanisms like memcg and the normal Linux page accounting already do.

Making sure that we don't run into an OOM situation while trying to
cope with a memory shortage is still a good idea, but this is also
not very well implemented since it means another opportunity of
recursion from the driver back into TTM.

So start to rework all of this by implementing a shrinker callback which
allows for TT object to be swapped out if necessary.

v2: Switch from limit to shrinker callback.
v3: fix gfp mask handling, use atomic for swapable_pages, add debugfs
v4: drop the extra gfp_mask checks

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208133226.36955-1-christian.koenig@amd.com
2021-02-09 17:27:12 +01:00
Imre Deak
4b8878eefa drm/dp_mst: Don't cache EDIDs for physical ports
Caching EDIDs for physical ports prevents updating the EDID if a port
gets reconnected via a Connection Status Notification message, fix this.

Fixes: db1a079569 ("drm/dp_mst: Handle SST-only branch device case")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210201120145.350258-2-imre.deak@intel.com
(cherry picked from commit 468091531c)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:16:57 +01:00
Dan Carpenter
8d0cb8860a drm/virtio: fix an error code in virtio_gpu_init()
If devm_request_mem_region() fails this code currently returns success
but it should return -EBUSY.

Fixes: 6076a9711d ("drm/virtio: implement blob resources: probe for host visible region")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/YBpy0GS7GfmafMfe@mwanda
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit eb988a2ee5)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:16:57 +01:00
Daniel Vetter
e2e2e008f9 drm/todo: Add entry for moving to dma_resv_lock
Requested by Thomas. I think it justifies a new level, since I tried
to make some forward progress on this last summer, and gave up (for
now). This is very tricky.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210122133624.1751802-1-daniel.vetter@ffwll.ch
(cherry picked from commit 5823cca39d)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:16:57 +01:00
Ye Bin
b9377df121 drm/nouveau: remove set but not used variable ‘pdev’ in nouveau_bios_init
Fix follow warning:
drivers/gpu/drm/nouveau/nouveau_bios.c:2086:18: warning: variable ‘pdev’ set but not used [-Wunused-but-set-variable]
  struct pci_dev *pdev;
                  ^~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210123013014.3815870-1-yebin10@huawei.com
(cherry picked from commit 09b20988ff)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:16:57 +01:00
Zack Rusin
bb0ea19639 drm/vmwgfx: Fix some memory leaks on errors
Dan noticed some issues with pci_release_region, this builds upon
that and fixes some other lingering issues. As part of this we
also can stop trying to manually free our managed device;
there's no need for it, it will be cleaned up automatically for us.

Fixes: 8772c0bb58 ("drm/vmwgfx: Cleanup pci resource allocation")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210128173756.121525-1-zackr@vmware.com
(cherry picked from commit 75ec69c79e)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:16:57 +01:00
Bernard Zhao
439dde0a96 drm/vc4: remove unneeded variable: "ret"
remove unneeded variable: "ret".

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210202122338.15351-1-bernard@vivo.com
(cherry picked from commit f0c5a89e53)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:16:57 +01:00
Joseph Schulte
57037094fe drm: replace drm_modeset_lock_all() in drm_client_modeset_dpms_legacy()
This patch helps complete Use  DRM_MODESET_LOCK_ALL* helpers instead of
boilerplate todo in Documentation/gpu/todo.rst

Signed-off-by: Joseph Schulte <joeschulte.js@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125144815.8389-1-joeschulte.js@gmail.com
(cherry picked from commit 482f3ef0b0)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:16:57 +01:00
Thomas Zimmermann
0b365a207e drm/gma500: Remove dependency on TTM
The gma500 driver does not use TTM.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-6-tzimmermann@suse.de
(cherry picked from commit 8180cc3752)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:12 +01:00
Thomas Zimmermann
ac798eb13c drm/gma500: Remove CONFIG_X86 conditionals from source files
Remove the CONFIG_X86 conditionals from the source code. The driver
already depends on X86 in the Kconfig file. Also, no one has been
trying to build it on a non-x86 platform recently, or they would have
noticed that drm_ttm_cache_flush() doesn't exist.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-5-tzimmermann@suse.de
(cherry picked from commit 6455af65e9)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Thomas Zimmermann
26499e0518 drm/gma500: Drop DRM_GMA3600 config option
With support for the MID-related chips removed, only support for
desktop chips is left in the driver. So just build the complete
driver if DRM_GMA500 has been selected. Anyone who wants to enable
the Poulsbo code would probably also want the Cedarview code.

[Patrik: Fixed conflict due to Oaktrail not being dropped]

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-4-tzimmermann@suse.de
(cherry picked from commit 837f23bb4b)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Thomas Zimmermann
e1da811218 drm/gma500: Remove Medfield support
Medfield is an outdated mobile platform with apparently no users left.
Remove it from gma500.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-2-tzimmermann@suse.de
(cherry picked from commit b51035c200)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Joe Perches
46d4a938fe dma-buf: Avoid comma separated statements
Use semicolons and braces.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/990bf6f33ccaf73ad56eb4bea8bd2c0db5e90a31.1598331148.git.joe@perches.com
Signed-off-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit e4abd7ad2b)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Qinglang Miao
de4248b744 drm/lima: fix reference leak in lima_pm_busy
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to putting operation will result in a
reference leak here.

A new function pm_runtime_resume_and_get is introduced in
[0] to keep usage counter balanced. So We fix the reference
leak by replacing it with new function.

[0] commit dd8088d5a8 ("PM: runtime: Add  pm_runtime_resume_and_get to deal with usage counter")

Fixes: 50de2e9ebb ("drm/lima: enable runtime pm")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127094438.121003-1-miaoqinglang@huawei.com
(cherry picked from commit de499781c9)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Luben Tuikov
c10983e14e drm/scheduler: Job timeout handler returns status (v3)
This patch does not change current behaviour.

The driver's job timeout handler now returns
status indicating back to the DRM layer whether
the device (GPU) is no longer available, such as
after it's been unplugged, or whether all is
normal, i.e. current behaviour.

All drivers which make use of the
drm_sched_backend_ops' .timedout_job() callback
have been accordingly renamed and return the
would've-been default value of
DRM_GPU_SCHED_STAT_NOMINAL to restart the task's
timeout timer--this is the old behaviour, and is
preserved by this patch.

v2: Use enum as the status of a driver's job
    timeout callback method.

v3: Return scheduler/device information, rather
    than task information.

Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Eric Anholt <eric@anholt.net>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Steven Price <steven.price@arm.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/415095/
(cherry picked from commit a6a1f036c7)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Dan Carpenter
78e4ba40f1 drm/vmwgfx/vmwgfx_drv: Fix an error path in vmw_setup_pci_resources()
The devm_memremap() function never returns NULL, it returns error
pointers so the test needs to be fixed.  Also we need to call
pci_release_regions() to avoid a memory leak.

Fixes: be4f77ac68 ("drm/vmwgfx: Cleanup fifo mmio handling")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YA6FMboLhnE3uSvb@mwanda
(cherry picked from commit f3ebd4e6b6)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Maxime Ripard
6ff92deff7 dt-binding: display: bcm2711-hdmi: Add CEC and hotplug interrupts
The CEC and hotplug interrupts were missing when that binding was
introduced, let's add them in now that we've figured out how it works.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-14-maxime@cerno.tech
(cherry picked from commit e7cbc68a28)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Maxime Ripard
ae442bf6d6 drm/vc4: hdmi: Don't register the CEC adapter if there's no interrupts
We introduced the BCM2711 support to the vc4 HDMI controller with 5.10,
but this was lacking any of the interrupts of the CEC controller so we
have to deal with the backward compatibility.

Do so by simply ignoring the CEC setup if the DT doesn't have the
interrupts property.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-13-maxime@cerno.tech
(cherry picked from commit 4d03ed7ad7)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Dom Cobley
1e5e4bbdfd drm/vc4: hdmi: Remove cec_available flag
Now that our HDMI controller supports CEC for the BCM2711, let's remove
that flag.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-12-maxime@cerno.tech
(cherry picked from commit f551863af9)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Maxime Ripard
185e98b3bd drm/vc4: hdmi: Support BCM2711 CEC interrupt setup
The HDMI controller found in the BCM2711 has an external interrupt
controller for the CEC and hotplug interrupt shared between the two
instances.

Let's add a variant flag to register a single interrupt handler and
deals with the interrupt handler setup, or two interrupt handlers
relying on an external irqchip.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-11-maxime@cerno.tech
(cherry picked from commit ad6380e9aa)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00
Maxime Ripard
ed4a6bbd63 drm/vc4: hdmi: Split the interrupt handlers
The BCM2711 has two different interrupt sources to transmit and receive
CEC messages, provided through an external interrupt chip shared between
the two HDMI interrupt controllers.

The rest of the CEC controller is identical though so we need to change
a bit the code organisation to share the code as much as possible, yet
still allowing to register independent handlers.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-10-maxime@cerno.tech
(cherry picked from commit 0c38490a03)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09 17:14:11 +01:00