Commit graph

1,169,205 commits

Author SHA1 Message Date
Michael Tretter
d2a1b58fd2 media: allegro: adjust channel after format change
A format change (i.e. the frame size or the codec) has multiple effects
on a channel:

- The available controls

- The limits of the available controls

- The default encoding options

To avoid scattering the changes all over the driver, add a new function
that goes over the channel and does all required adjustments.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 16:05:03 +01:00
Michael Tretter
8e64f00846 media: allegro: implement S_FMT for CAPTURE
In order to support different codecs, the driver must support changing
the format on CAPTURE. Therefore, the driver needs to handle S_FMT on
CAPTURE.

As the driver will have a different number of formats for OUTPUT and
CAPTURE, split the check for the format index in ENUM_FMT into CAPTURE
and OUTPUT.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 16:04:30 +01:00
Saravana Kannan
4731210c09 gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default
There are multiple instances of GPIO device tree nodes of the form:

foo {
	compatible = "acme,foo";
	...

	gpio0: gpio0@xxxxxxxx {
		compatible = "acme,bar";
		...
		gpio-controller;
	};

	gpio1: gpio1@xxxxxxxx {
		compatible = "acme,bar";
		...
		gpio-controller;
	};

	...
}

bazz {
	my-gpios = <&gpio0 ...>;
}

Case 1: The driver for "foo" populates struct device for these gpio*
nodes and then probes them using a driver that binds with "acme,bar".
This driver for "acme,bar" then registers the gpio* nodes with gpiolib.
This lines up with how DT nodes with the "compatible" property are
typically converted to struct devices and then registered with driver
core to probe them. This also allows the gpio* devices to hook into all
the driver core capabilities like runtime PM, probe deferral,
suspend/resume ordering, device links, etc.

Case 2: The driver for "foo" doesn't populate struct devices for these
gpio* nodes before registering them with gpiolib. Instead it just loops
through its child nodes and directly registers the gpio* nodes with
gpiolib.

Drivers that follow case 2 cause problems with fw_devlink=on. This is
because fw_devlink will prevent bazz from probing until there's a struct
device that has gpio0 as its fwnode (because bazz lists gpio0 as a GPIO
supplier). Once the struct device is available, fw_devlink will create a
device link with gpio0 device as the supplier and bazz device as the
consumer. After this point, since the gpio0 device will never bind to a
driver, the device link will prevent bazz device from ever probing.

Finding and refactoring all the instances of drivers that follow case 2
will cause a lot of code churn and it is not something that can be done
in one shot. In some instances it might not even be possible to refactor
them cleanly. Examples of such instances are [1] [2].

This patch works around this problem and avoids all the code churn by
simply setting the fwnode of the gpio_device and creating a stub driver
to bind to the gpio_device. This allows all the consumers to continue
probing when the driver follows case 2.

[1] - https://lore.kernel.org/lkml/20201014191235.7f71fcb4@xhacker.debian/
[2] - https://lore.kernel.org/lkml/e28e1f38d87c12a3c714a6573beba6e1@kernel.org/

Fixes: e590474768 ("driver core: Set fw_devlink=on by default")
Cc: Marc Zyngier <maz@kernel.org>
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210122193600.1415639-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 16:04:10 +01:00
Michael Tretter
7f8e438b90 media: allegro: add HEVC NAL unit generator
When encoding a video as HEVC, the allegro driver needs to generate the
Non-VCL NAL units for HEVC. Do the same as for H.264 and add a module
that takes C structs for the VPS/SPS/PPS and encodes the fields as RBPS
as specified by "ITU-T Rec. H.265 (02/2018) high efficiency video
coding".

[hverkuil: add missing static for nal_hevc_write/read_start_code_prefix]
[hverkuil: fix typo: pps -> vps in nal_hevc_write_vps]

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 16:04:04 +01:00
Michael Tretter
98c588b6d2 media: allegro: add helper to report unsupported fields
Allow generators to explicitly signal an error if the C structs contain
unsupported or invalid fields.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:52:23 +01:00
Kent Gibson
03a58ea590 gpiolib: cdev: clear debounce period if line set to output
When set_config changes a line from input to output debounce is
implicitly disabled, as debounce makes no sense for outputs, but the
debounce period is not being cleared and is still reported in the
line info.

So clear the debounce period when the debouncer is stopped in
edge_detector_stop().

Fixes: 65cff70464 ("gpiolib: cdev: support setting debounce")
Cc: stable@vger.kernel.org
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-01-27 15:52:13 +01:00
Michael Tretter
256442881b media: allegro: extract RBSP handler from H.264 NAL generator
The RBSP structure is the same for HEVC and H.264. In order to be able
to reuse the RBSP handler for generating HEVC NAL units, extract the
functions from the H.264 generator.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:51:51 +01:00
Jacopo Mondi
35cb6aa826 media: dt-bindings: media: ov5647: Fix filename
Commit 1b5071af82 ("media: dt-bindings: media: i2c: Rename
ov5647.yaml") renamed the bindings file but did not update the
Id: field there.

Fix it by using the new filename.

Fixes: 1b5071af82 ("media: dt-bindings: media: i2c: Rename ov5647.yaml")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:49:45 +01:00
Laurent Pinchart
25a6436002 media: v4l2-async: Safely unregister an non-registered async subdev
Make the V4L2 async framework a bit more robust by allowing to
unregister a non-registered async subdev. Otherwise the
v4l2_async_cleanup() will attempt to delete the async subdev from the
subdev_list with the corresponding list_head not initialized.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:49:21 +01:00
Lad Prabhakar
b7cdd6453c media: i2c/Kconfig: Select FWNODE for OV772x sensor
Fix OV772x build breakage by selecting V4L2_FWNODE config:

ia64-linux-ld: drivers/media/i2c/ov772x.o: in function `ov772x_probe':
ov772x.c:(.text+0x1ee2): undefined reference to `v4l2_fwnode_endpoint_alloc_parse'
ia64-linux-ld: ov772x.c:(.text+0x1f12): undefined reference to `v4l2_fwnode_endpoint_free'
ia64-linux-ld: ov772x.c:(.text+0x2212): undefined reference to `v4l2_fwnode_endpoint_alloc_parse'

Fixes: 8a10b4e360 ("media: i2c: ov772x: Parse endpoint properties")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:49:04 +01:00
Ezequiel Garcia
517fd2b6a0 media: v4l2-async: Add waiting subdevices debugfs
There is currently little to no information available about the reasons
why a v4l2-async device hasn't probed completely.

Inspired by the "devices_deferred" debugfs file, add a file to list
information about the subdevices that are on waiting lists, for each
notifier.

This is useful to debug v4l2-async subdevices and notifiers, for instance
when doing device bring-up.

For instance, a typical output would be:

$ cat /sys/kernel/debug/video4linux/pending_async_subdevices
ipu1_csi1:
 [fwnode] dev=20e0000.iomuxc-gpr:ipu1_csi1_mux, node=/soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux
ipu1_csi0:
 [fwnode] dev=20e0000.iomuxc-gpr:ipu1_csi0_mux, node=/soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux
imx6-mipi-csi2:
 [fwnode] dev=1-003c, node=/soc/bus@2100000/i2c@21a4000/camera@3c
imx-media:

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:47:54 +01:00
Juergen Gross
2e92493637 x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled
When booting a kernel which has been built with CONFIG_AMD_MEM_ENCRYPT
enabled as a Xen pv guest a warning is issued for each processor:

[    5.964347] ------------[ cut here ]------------
[    5.968314] WARNING: CPU: 0 PID: 1 at /home/gross/linux/head/arch/x86/xen/enlighten_pv.c:660 get_trap_addr+0x59/0x90
[    5.972321] Modules linked in:
[    5.976313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W         5.11.0-rc5-default #75
[    5.980313] Hardware name: Dell Inc. OptiPlex 9020/0PC5F7, BIOS A05 12/05/2013
[    5.984313] RIP: e030:get_trap_addr+0x59/0x90
[    5.988313] Code: 42 10 83 f0 01 85 f6 74 04 84 c0 75 1d b8 01 00 00 00 c3 48 3d 00 80 83 82 72 08 48 3d 20 81 83 82 72 0c b8 01 00 00 00 eb db <0f> 0b 31 c0 c3 48 2d 00 80 83 82 48 ba 72 1c c7 71 1c c7 71 1c 48
[    5.992313] RSP: e02b:ffffc90040033d38 EFLAGS: 00010202
[    5.996313] RAX: 0000000000000001 RBX: ffffffff82a141d0 RCX: ffffffff8222ec38
[    6.000312] RDX: ffffffff8222ec38 RSI: 0000000000000005 RDI: ffffc90040033d40
[    6.004313] RBP: ffff8881003984a0 R08: 0000000000000007 R09: ffff888100398000
[    6.008312] R10: 0000000000000007 R11: ffffc90040246000 R12: ffff8884082182a8
[    6.012313] R13: 0000000000000100 R14: 000000000000001d R15: ffff8881003982d0
[    6.016316] FS:  0000000000000000(0000) GS:ffff888408200000(0000) knlGS:0000000000000000
[    6.020313] CS:  e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[    6.024313] CR2: ffffc900020ef000 CR3: 000000000220a000 CR4: 0000000000050660
[    6.028314] Call Trace:
[    6.032313]  cvt_gate_to_trap.part.7+0x3f/0x90
[    6.036313]  ? asm_exc_double_fault+0x30/0x30
[    6.040313]  xen_convert_trap_info+0x87/0xd0
[    6.044313]  xen_pv_cpu_up+0x17a/0x450
[    6.048313]  bringup_cpu+0x2b/0xc0
[    6.052313]  ? cpus_read_trylock+0x50/0x50
[    6.056313]  cpuhp_invoke_callback+0x80/0x4c0
[    6.060313]  _cpu_up+0xa7/0x140
[    6.064313]  cpu_up+0x98/0xd0
[    6.068313]  bringup_nonboot_cpus+0x4f/0x60
[    6.072313]  smp_init+0x26/0x79
[    6.076313]  kernel_init_freeable+0x103/0x258
[    6.080313]  ? rest_init+0xd0/0xd0
[    6.084313]  kernel_init+0xa/0x110
[    6.088313]  ret_from_fork+0x1f/0x30
[    6.092313] ---[ end trace be9ecf17dceeb4f3 ]---

Reason is that there is no Xen pv trap entry for X86_TRAP_VC.

Fix that by adding a generic trap handler for unknown traps and wire all
unknown bare metal handlers to this generic handler, which will just
crash the system in case such a trap will ever happen.

Fixes: 0786138c78 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Cc: <stable@vger.kernel.org> # v5.10
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-27 15:45:29 +01:00
Stephen Zhang
e9ad2eb3d9 workqueue: Use %s instead of function name
It is better to replace the function name with %s, in case the function
name changes.

Signed-off-by: Stephen Zhang <stephenzhangzsd@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2021-01-27 09:42:48 -05:00
Vinod Koul
e161ce8e4c soc: qcom: aoss: Add SM8350 compatible
Add SM8350 compatible to the qcom_aoss binding and driver.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127123054.263231-3-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-27 08:34:45 -06:00
Menglong Dong
bbd13d6a7b drm/omap: dsi: fix unreachable code in dsi_vc_send_short()
The 'r' in dsi_vc_send_short() is of type 'unsigned int', so the
'r < 0' can't be true.

Fix this by introducing a 'err' of type 'int' insteaded.

Fixes: 1ed6253856 ("drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg")

Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127015117.23267-1-dong.menglong@zte.com.cn
2021-01-27 16:21:36 +02:00
Ezequiel Garcia
97cf50b6f8 media: v4l2-async: Remove V4L2_ASYNC_MATCH_CUSTOM
Custom/driver-specific v4l2-async match support was introduced
in 2013, as V4L2_ASYNC_BUS_CUSTOM.

This type of match never had any user, so it's fair
to conclude it's not required and that safe for removal.
If the support is ever needed, it can always be restored.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:17:48 +01:00
Ioana Ciornei
296c6264d4 bus: fsl-mc: add autorescan sysfs
Add the autorescan sysfs in order to enable/disable the DPRC IRQs on
which automatic rescan of the bus is performed. This is important when
dynamic creation of objects is needed to happen in a timely manner because
object creation can be bundled together.

Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-6-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 15:13:53 +01:00
Ioana Ciornei
3f60994381 bus: fsl-mc: add bus rescan attribute
Introduce the rescan attribute as a bus attribute to
synchronize the fsl-mc bus objects and the MC firmware.

To rescan the fsl-mc bus, e.g.,
echo 1 > /sys/bus/fsl-mc/rescan

Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-5-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 15:13:53 +01:00
Ioana Ciornei
2cf1e703f0 bus: fsl-mc: add fsl-mc userspace support
Adding userspace support for the MC (Management Complex) means exporting
an ioctl capable device file representing the root resource container.

This new functionality in the fsl-mc bus driver intends to provide
userspace applications an interface to interact with the MC firmware.

Commands that are composed in userspace are sent to the MC firmware
through the FSL_MC_SEND_MC_COMMAND ioctl.  By default the implicit MC
I/O portal is used for this operation, but if the implicit one is busy,
a dynamic portal is allocated and then freed upon execution.

The command received through the ioctl interface is checked against a
known whitelist of accepted MC commands. Commands that attempt a change
in hardware configuration will need CAP_NET_ADMIN, while commands used
in debugging do not need it.

Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-4-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 15:13:52 +01:00
Ioana Ciornei
4670798926 bus: fsl-mc: export mc_cmd_hdr_read_cmdid() to the fsl-mc bus
Export the mc_cmd_hdr_read_cmdid() function to the entire fsl-mc bus
since it will be needed in the following patch.

Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-3-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 15:13:52 +01:00
Ioana Ciornei
8544717cda bus: fsl-mc: move fsl_mc_command struct in a uapi header
Define "struct fsl_mc_command" as a structure that can cross the
user/kernel boundary.

Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-2-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 15:13:52 +01:00
Joe Perches
9e56380ae6 media: uvcvideo: Rename debug functions
trace isn't a good name as it's not a trace mechanism, it is a
typical debug mechanism.

Rename uvc_trace/uvc_trace_cont macros to uvc_dbg/uvc_dbg_cont.
Rename uvc_trace_param to uvc_dbg_param
Rename UVC_TRACE_<FOO> defines to UVC_DBG_<FOO>
Use ## concatenation in uvc_dbg macros to avoid overly long and
repetitive UVC_DBG uses

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:08:19 +01:00
Ricardo Ribalda
ed4c5fa4d8 media: uvcvideo: use dev_printk() for uvc_trace()
Instead of calling prink() inside uvc_trace, use dev_printk(), which adds
context to the output.

Now that we are at it, regroup the strings so the messages can be easily
"grepable".

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:07:27 +01:00
Ricardo Ribalda
59e92bf627 media: uvcvideo: New macro uvc_trace_cont
Remove all the duplicated code around printk(KERN_CONT, with a new macro.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:06:47 +01:00
Ricardo Ribalda
69df09547e media: uvcvideo: Use dev_ printk aliases
Replace all the uses of printk() and uvc_printk() with its
equivalent dev_ alias macros.

Modify uvc_warn_once() macro to use dev_info instead printk().

They are more standard across the kernel tree and provide
more context about the error.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:06:10 +01:00
Ricardo Ribalda
6f6a87eb82 media: uvcvideo: Add Privacy control based on EXT_GPIO
Add a new control and mapping for Privacy controls connected to
UVC_GUID_EXT_GPIO_CONTROLLERs.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:05:29 +01:00
Ricardo Ribalda
2886477ff9 media: uvcvideo: Implement UVC_EXT_GPIO_UNIT
Some devices can implement a physical switch to disable the input of the
camera on demand. Think of it like an elegant privacy sticker.

The system can read the status of the privacy switch via a GPIO.

It is important to know the status of the switch, e.g. to notify the
user when the camera will produce black frames and a videochat
application is used.

In some systems, the GPIO is connected to the main SoC instead of the
camera controller, with the connection reported by the system firmware
(ACPI or DT). In that case, the UVC device isn't aware of the GPIO. We
need to implement a virtual entity to handle the GPIO fully on the
driver side.

For example, for ACPI-based systems, the GPIO is reported in the USB
device object:

  Scope (\_SB.PCI0.XHCI.RHUB.HS07)
  {

	  /.../

    Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
    {
        GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
            "\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
            )
            {   // Pin list
                0x0064
            }
    })
    Name (_DSD, Package (0x02)  // _DSD: Device-Specific Data
    {
        ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
        Package (0x01)
        {
            Package (0x02)
            {
                "privacy-gpio",
                Package (0x04)
                {
                    \_SB.PCI0.XHCI.RHUB.HS07,
                    Zero,
                    Zero,
                    One
                }
            }
        }
    })
  }

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:04:52 +01:00
Ricardo Ribalda
65900c581d media: uvcvideo: Allow entity-defined get_info and get_cur
Allows controls to get their properties and current value
from an entity-defined function instead of via a query to the USB
device.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:03:39 +01:00
Ricardo Ribalda
d9c8763e61 media: uvcvideo: Provide sync and async uvc_ctrl_status_event
Split the functionality of void uvc_ctrl_status_event_work in two, so it
can be called by functions outside interrupt context and not part of an
URB.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:03:02 +01:00
Ricardo Ribalda
7532dad663 media: uvcvideo: Allow entities with no pads
Avoid an underflow while calculating the number of inputs for entities
with zero pads.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:02:20 +01:00
Ricardo Ribalda
cae79e50d1 media: uvcvideo: Allow extra entities
Increase the size of the id, to avoid collisions with entities
implemented by the driver that are not part of the UVC device.

Entities exposed by the UVC device use IDs 0-255, extra entities
implemented by the driver (such as the GPIO entity) use IDs 256 and
up.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:01:41 +01:00
Ricardo Ribalda
351509c604 media: uvcvideo: Move guid to entity
Instead of having multiple copies of the entity guid on the code, move
it to the entity structure.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 15:00:56 +01:00
Laurent Pinchart
dc9455ffae media: uvcvideo: Accept invalid bFormatIndex and bFrameIndex values
The Renkforce RF AC4K 300 Action Cam 4K reports invalid bFormatIndex and
bFrameIndex values when negotiating the video probe and commit controls.
The UVC descriptors report a single supported format and frame size,
with bFormatIndex and bFrameIndex both equal to 2, but the video probe
and commit controls report bFormatIndex and bFrameIndex set to 1.

The device otherwise operates correctly, but the driver rejects the
values and fails the format try operation. Fix it by ignoring the
invalid indices, and assuming that the format and frame requested by the
driver are accepted by the device.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=210767

Fixes: 8a652a17e3 ("media: uvcvideo: Ensure all probed info is returned to v4l2")
Reported-by: Till Dörges <doerges@pre-sense.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 14:59:27 +01:00
Ivan Zaentsev
2f6055c26f w1: w1_therm: Fix conversion result for negative temperatures
DS18B20 device driver returns an incorrect value for negative temperatures
due to a missing sign-extension in w1_DS18B20_convert_temp().

Fix by using s16 temperature value when converting to int.

Fixes: 9ace0b4dab (w1: w1_therm: Add support for GXCAS GX20MH01 device.)
Cc: stable <stable@vger.kernel.org>
Reported-by: Paweł Marciniak <sunwire@gmail.com>
Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru>
Link: https://lore.kernel.org/r/20210121093021.224764-1-ivan.zaentsev@wirenboard.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 14:59:16 +01:00
Davidlohr Bueso
2c104a469a platform/goldfish: Convert pipe tasklet to threaded irq
Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so. A more suitable equivalent
is to converted to threaded irq instead and deal with the signaled
pipes in task context.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Link: https://lore.kernel.org/r/20210115002014.117528-1-dave@stgolabs.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 14:57:06 +01:00
Alexander Kapshuk
afe9017901 ver_linux: Eliminate duplicate code in ldconfig processing logic
The code that acquires the version strings for libc and libcpp is
identical, as is the printversion call. The only difference being the
name of the library being printed.

Refactor the code by unifying the bits that are common to both libraries.

Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Link: https://lore.kernel.org/r/20210108112626.8623-1-alexander.kapshuk@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 14:54:42 +01:00
Bert Vermeulen
d0259c42ab spdxcheck.py: Use Python 3
Python 2.x has been officially EOL'ed for some time, and in any case
the git module for it is hard to come by.

Signed-off-by: Bert Vermeulen <bert@biot.com>
Link: https://lore.kernel.org/r/20210121085412.265400-1-bert@biot.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 14:50:12 +01:00
Laurent Pinchart
b400b6f28a media: uvcvideo: Force UVC version to 1.0a for 1bcf:0b40
The Shenzhen Aoni Electronic Co.,Ltd 2K FHD camera reports a UVC 1.10
version, but implements UVC 1.0a as shown by the UVC probe control being
26 bytes long. Force the UVC version for that device.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Doncho Minkov <donchominkov@gmail.com>
Tested-by: Doncho Minkov <donchominkov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 14:45:55 +01:00
Dan Carpenter
ea354b6ddd media: zr364xx: fix memory leaks in probe()
Syzbot discovered that the probe error handling doesn't clean up the
resources allocated in zr364xx_board_init().  There are several
related bugs in this code so I have re-written the error handling.

1)  Introduce a new function zr364xx_board_uninit() which cleans up
    the resources in zr364xx_board_init().
2)  In zr364xx_board_init() if the call to zr364xx_start_readpipe()
    fails then release the "cam->buffer.frame[i].lpvbits" memory
    before returning.  This way every function either allocates
    everything successfully or it cleans up after itself.
3)  Re-write the probe function so that each failure path goto frees
    the most recent allocation.  That way we don't free anything
    before it has been allocated and we can also verify that
    everything is freed.
4)  Originally, in the probe function the "cam->v4l2_dev.release"
    pointer was set to "zr364xx_release" near the start but I moved
    that assignment to the end, after everything had succeeded.  The
    release function was never actually called during the probe cleanup
    process, but with this change I wanted to make it clear that we
    don't want to call zr364xx_release() until everything is
    allocated successfully.

Next I re-wrote the zr364xx_release() function.  Ideally this would
have been a simple matter of copy and pasting the cleanup code from
probe and adding an additional call to video_unregister_device().  But
there are a couple quirks to note.

1)  The probe function does not call videobuf_mmap_free() and I don't
    know where the videobuf_mmap is allocated.  I left the code as-is to
    avoid introducing a bug in code I don't understand.
2)  The zr364xx_board_uninit() has a call to zr364xx_stop_readpipe()
    which is a change from the original behavior with regards to
    unloading the driver.  Calling zr364xx_stop_readpipe() on a stopped
    pipe is not a problem so this is safe and is potentially a bugfix.

Reported-by: syzbot+b4d54814b339b5c6bbd4@syzkaller.appspotmail.com
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 14:44:13 +01:00
Ezequiel Garcia
9d3b7ca42d media: imx6-mipi-csi2: Call remote subdev get_mbus_config to get active lanes
Currently, the CSI2 subdevice is using the data-lanes from the
neareast endpoint to config the CSI2 lanes.

While this may work, the proper way to configure the hardware is
to obtain the remote subdevice in v4l2_async_notifier_operations.bound(),
and then call get_mbus_config using the remote subdevice to get
the active lanes.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 14:43:36 +01:00
Christophe JAILLET
b05bb3bfa5 media: smipcie: switch from 'pci_' to 'dma_' API
The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'smi_port_init()' GFP_KERNEL can be used
because this function is called only from the probe function and no lock
is taken in between.

The call chain is:
  smi_probe()
    --> smi_port_attach()
      --> smi_port_init()

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 14:43:03 +01:00
ivan tkachenko
711ae4f6f3 media: hdmi: cec: replace broken link to HDMI specs
Current link died, according to Wayback Machine, back in 2017. And the
website is completely down since 2019. Moreover, there was a custom
cover on that PDF, i.e. it was modified.

According to HDMI licence agreement (LA), HDMI specification and technical
information are supposed to be hosted on www.hdmi.org exclusively, and not
redistributed by third-parties.

Sure, there are still many more or less reliable "mirrors" out there with
a direct download straight from a search engine's page. However, for
example, from FPGA4fun[1] website it was removed "per HDMI LA request".

Unfortunately, the official download page is protected by email CAPTCHA,
but that seems to be the only legit way to obtain a copy.

[1] https://www.fpga4fun.com/HDMI.html

Signed-off-by: ivan tkachenko <me@ratijas.tk>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 14:42:43 +01:00
Maxim Plotnikov
65fba0b15e media: Fix RTL2832 not depending on REGMAP_I2C
Prevents this compile time error:

ERROR: modpost: "__regmap_init_i2c" [drivers/media/dvb-frontends/rtl2832.ko] undefined!

Signed-off-by: Maxim Plotnikov <wgh@torlan.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 14:42:23 +01:00
Niklas Söderlund
bdd59592b2 media: rcar-vin: Route events to correct video device
The event route for VIN running with a media controller (Gen3) is
incorrect as all events are only routed to the video device that are
used to register the async notifier.

Remedy this be examining which subdevice generated the event and route
it to all VIN(s) that are connected to that subdevice.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27 14:42:05 +01:00
Hans de Goede
c35901b39d virt: vbox: Do not use wait_event_interruptible when called from kernel context
Do not use wait_event_interruptible when vbg_hgcm_call() gets called from
kernel-context, such as it being called by the vboxsf filesystem code.

This fixes some filesystem related system calls on shared folders
unexpectedly failing with -EINTR.

Fixes: 0532a1b0d0 ("virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.x")
Reported-by: Ludovic Pouzenc <bugreports@pouzenc.fr>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210121150754.147598-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 14:37:02 +01:00
Arnd Bergmann
38009c7667 drivers/base: build kunit tests without structleak plugin
The structleak plugin causes the stack frame size to grow immensely:

drivers/base/test/property-entry-test.c: In function 'pe_test_reference':
drivers/base/test/property-entry-test.c:481:1: error: the frame size of 2640 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
  481 | }
      | ^
drivers/base/test/property-entry-test.c: In function 'pe_test_uints':
drivers/base/test/property-entry-test.c:99:1: error: the frame size of 2592 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

Turn it off in this file.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210125124533.101339-3-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 14:35:18 +01:00
Bhaskar Chowdhury
6091b08eda drivers: base: power: Fix resposible -> responsible in runtime.c
s/resposible/responsible/

Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/20210120143312.3229181-1-unixbhaskar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 14:35:14 +01:00
Joe Pater
4044b2fcfb drivers: base: change 'driver_create_groups' to 'driver_add_groups' in printk
driver_create_groups doesn't seem to have ever existed. Change its
mention in a printk to 'driver_add_groups'.

Signed-off-by: Joe Pater <02joepater06@gmail.com>
Link: https://lore.kernel.org/r/20210110145442.15301-1-02joepater06@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 14:35:09 +01:00
zhenwei pi
8d6da6575f misc: pvpanic: introduce events device attribue
Suggested by Paolo & Greg, add 'events' device attribute that can be
used to limit which capabilities the driver uses.

Finally, the pvpanic guest driver works by the limitation of both
device capability and user setting.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20210110115358.79100-3-pizhenwei@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 14:28:17 +01:00
zhenwei pi
487709fa1b misc: pvpanic: introduce device capability
According to pvpanic spec:
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/specs/pvpanic.txt

The guest should determine pvpanic capability by RDPT, so initialize
capability during device probing. There is no need to register panic
notifier callback function if no events supported.

Before sending event to host side, check capability firstly.

Suggested by Greg KH, use sysfs to expose capability to user space,
also add new sysfs attribute in document.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20210110115358.79100-2-pizhenwei@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27 14:28:17 +01:00