Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c:55: warning: cannot understand function prototype: 'struct vmw_legacy_display_unit '
drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c:218: warning: Function parameter or member 'state' not described in 'vmw_ldu_crtc_atomic_enable'
drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c:228: warning: Function parameter or member 'state' not described in 'vmw_ldu_crtc_atomic_disable'
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-14-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c:299: warning: Function parameter or member 'dev_priv' not described in 'vmw_local_fifo_reserve'
drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c:299: warning: Function parameter or member 'bytes' not described in 'vmw_local_fifo_reserve'
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-13-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c:275: warning: Function parameter or member 'p_offset' not described in 'vmw_piter_start'
drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c:676: warning: Function parameter or member 'evict' not described in 'vmw_move_notify'
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-12-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c:215: warning: Excess function parameter 'obj_type' description in 'vmw_resource_init'
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c:303: warning: Excess function parameter 'p_res' description in 'vmw_user_resource_noref_lookup_handle'
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c:328: warning: Function parameter or member 'dev_priv' not described in 'vmw_user_lookup_handle'
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c:328: warning: Function parameter or member 'tfile' not described in 'vmw_user_lookup_handle'
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c:328: warning: Function parameter or member 'handle' not described in 'vmw_user_lookup_handle'
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c:328: warning: Function parameter or member 'out_surf' not described in 'vmw_user_lookup_handle'
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c:328: warning: Function parameter or member 'out_buf' not described in 'vmw_user_lookup_handle'
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c:398: warning: Function parameter or member 'dirtying' not described in 'vmw_resource_do_validate'
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c:601: warning: Function parameter or member 'interruptible' not described in 'vmw_resource_reserve'
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c:601: warning: Function parameter or member 'no_backup' not described in 'vmw_resource_reserve'
drivers/gpu/drm/vmwgfx/vmwgfx_resource.c:987: warning: Function parameter or member 'interruptible' not described in 'vmw_resource_pin'
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-11-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c:30:
drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c:448: warning: Function parameter or member 'offset' not described in 'vmw_fops_read'
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-10-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c:164: warning: Function parameter or member 'ioctl' not described in 'VMW_IOCTL_DEF'
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c:164: warning: Function parameter or member 'func' not described in 'VMW_IOCTL_DEF'
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c:164: warning: Function parameter or member 'flags' not described in 'VMW_IOCTL_DEF'
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c:170: warning: cannot understand function prototype: 'const struct drm_ioctl_desc vmw_ioctls[] = '
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c:542: warning: Function parameter or member 'dev_priv' not described in 'vmw_get_initial_size'
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c:611: warning: Function parameter or member 'dev_priv' not described in 'vmw_dma_masks'
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c:611: warning: Excess function parameter 'dev' description in 'vmw_dma_masks'
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-9-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vmwgfx/vmwgfx_kms.h:256:23: warning: ‘vmw_cursor_plane_formats’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/vmwgfx/vmwgfx_kms.h:248:23: warning: ‘vmw_primary_plane_formats’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/vmwgfx/vmwgfx_kms.h:256:23: warning: ‘vmw_cursor_plane_formats’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/vmwgfx/vmwgfx_kms.h:248:23: warning: ‘vmw_primary_plane_formats’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/vmwgfx/vmwgfx_kms.h:256:23: warning: ‘vmw_cursor_plane_formats’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/vmwgfx/vmwgfx_kms.h:248:23: warning: ‘vmw_primary_plane_formats’ defined but not used [-Wunused-const-variable=]
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-8-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c: In function ‘vmw_du_primary_plane_atomic_check’:
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:460:31: warning: variable ‘vcs’ set but not used [-Wunused-but-set-variable]
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-5-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:89: warning: Enum value 'vmw_res_rel_max' not described in enum 'vmw_resource_relocation_type'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:136: warning: Function parameter or member 'func' not described in 'vmw_cmd_entry'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:136: warning: Function parameter or member 'cmd_name' not described in 'vmw_cmd_entry'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:212: warning: Function parameter or member 'res' not described in 'vmw_cmd_ctx_first_setup'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:523: warning: Function parameter or member 'sw_context' not described in 'vmw_resource_relocation_add'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:523: warning: Excess function parameter 'list' description in 'vmw_resource_relocation_add'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:653: warning: Function parameter or member 'p_res' not described in 'vmw_cmd_res_check'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:653: warning: Excess function parameter 'p_val' description in 'vmw_cmd_res_check'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:1716: warning: Function parameter or member 'res' not described in 'vmw_cmd_res_switch_backup'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:1716: warning: Excess function parameter 'val_node' description in 'vmw_cmd_res_switch_backup'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:3757: warning: Function parameter or member 'file_priv' not described in 'vmw_execbuf_fence_commands'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:3757: warning: Function parameter or member 'dev_priv' not described in 'vmw_execbuf_fence_commands'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:3757: warning: Function parameter or member 'p_fence' not described in 'vmw_execbuf_fence_commands'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:3757: warning: Function parameter or member 'p_handle' not described in 'vmw_execbuf_fence_commands'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:3954: warning: Function parameter or member 'kernel_commands' not described in 'vmw_execbuf_cmdbuf'
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-4-lee.jones@linaro.org
Currently the driver doesn't drop a packet which can't be sent by tun
(e.g bad packet). In this case, the driver will always process the
same packet lead to the tx queue stuck.
To fix this issue:
1. in the case of persistent failure (e.g bad packet), the driver
can skip this descriptor by ignoring the error.
2. in the case of transient failure (e.g -ENOBUFS, -EAGAIN and -ENOMEM),
the driver schedules the worker to try again.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/1610685980-38608-1-git-send-email-wangyunjian@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add compatible strings for the USB DWC3 controller on QCOM SM8150,
SM8250 and SM8350 SoCs.
Note the SM8150 & SM8250 compatibles are already being used in the
dts but was missing from the documentation.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210119173748.6729-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 0883ce8146. Originally
these quirks were added because of the issues with using the eDP
backlight interfaces on certain laptop panels, which made it impossible
to properly probe for DPCD backlight support without having a whitelist
for panels that we know have working VESA backlight control interfaces
over DPCD. As well, it should be noted it was impossible to use the
normal sink OUI for recognizing these panels as none of them actually
filled out their OUIs, hence needing to resort to checking EDIDs.
At the time we weren't really sure why certain panels had issues with
DPCD backlight controls, but we eventually figured out that there was a
second interface that these problematic laptop panels actually did work
with and advertise properly: Intel's proprietary backlight interface for
HDR panels. So far the testing we've done hasn't brought any panels to
light that advertise this interface and don't support it properly, which
means we finally have a real solution to this problem.
As a result, we now have no need for the force DPCD backlight quirk, and
furthermore this also removes the need for any kind of EDID quirk
checking in DRM. So, let's just revert it for now since we were the only
driver using this.
v3:
* Rebase
v2:
* Fix indenting error picked up by checkpatch in
intel_edp_init_connector()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: thaytan@noraisin.net
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114221709.2261452-6-lyude@redhat.com
Since we now support controlling panel backlights through DPCD using
both the standard VESA interface, and Intel's proprietary HDR backlight
interface, we should allow the user to be able to explicitly choose
between one or the other in the event that we're wrong about panels
reliably reporting support for the Intel HDR interface.
So, this commit adds support for this by introducing two new
enable_dpcd_backlight options: 2 which forces i915 to only probe for the
VESA interface, and 3 which forces i915 to only probe for the Intel
backlight interface (might be useful if we find panels in the wild that
report the VESA interface in their VBT, but actually only support the
Intel backlight interface).
v3:
* Rebase
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: thaytan@noraisin.net
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114221709.2261452-5-lyude@redhat.com
So-recently a bunch of laptops on the market have started using DPCD
backlight controls instead of the traditional DDI backlight controls.
Originally we thought we had this handled by adding VESA backlight
control support to i915, but the story ended up being a lot more
complicated then that.
Simply put-there's two main backlight interfaces Intel can see in the
wild. Intel's proprietary HDR backlight interface, and the standard VESA
backlight interface. Note that many panels have been observed to report
support for both backlight interfaces, but testing has shown far more
panels work with the Intel HDR backlight interface at the moment.
Additionally, the VBT appears to be capable of reporting support for the
VESA backlight interface but not the Intel HDR interface which needs to
be probed by setting the right magic OUI.
On top of that however, there's also actually two different variants of
the Intel HDR backlight interface. The first uses the AUX channel for
controlling the brightness of the screen in both SDR and HDR mode, and
the second only uses the AUX channel for setting the brightness level in
HDR mode - relying on PWM for setting the brightness level in SDR mode.
For the time being we've been using EDIDs to maintain a list of quirks
for panels that safely do support the VESA backlight interface. Adding
support for Intel's HDR backlight interface in addition however, should
finally allow us to auto-detect eDP backlight controls properly so long
as we probe like so:
* If the panel's VBT reports VESA backlight support, assume it really
does support it
* If the panel's VBT reports DDI backlight controls:
* First probe for Intel's HDR backlight interface
* If that fails, probe for VESA's backlight interface
* If that fails, assume no DPCD backlight control
* If the panel's VBT reports any other backlight type: just assume it
doesn't have DPCD backlight controls
Changes since v4:
* Fix checkpatch issues
Changes since v3:
* Stop using drm_device and use drm_i915_private instead
* Don't forget to return from intel_dp_aux_hdr_get_backlight() if we fail
to read the current backlight mode from the DPCD
* s/uint8_t/u8/
* Remove unneeded parenthesis in intel_dp_aux_hdr_enable_backlight()
* Use drm_dbg_kms() in intel_dp_aux_init_backlight_funcs()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: thaytan@noraisin.net
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114221709.2261452-4-lyude@redhat.com
Currently, every different type of backlight hook that i915 supports is
pretty straight forward - you have a backlight, probably through PWM
(but maybe DPCD), with a single set of platform-specific hooks that are
used for controlling it.
HDR backlights, in particular VESA and Intel's HDR backlight
implementations, can end up being more complicated. With Intel's
proprietary interface, HDR backlight controls always run through the
DPCD. When the backlight is in SDR backlight mode however, the driver
may need to bypass the TCON and control the backlight directly through
PWM.
So, in order to support this we'll need to split our backlight callbacks
into two groups: a set of high-level backlight control callbacks in
intel_panel, and an additional set of pwm-specific backlight control
callbacks. This also implies a functional changes for how these
callbacks are used:
* We now keep track of two separate backlight level ranges, one for the
high-level backlight, and one for the pwm backlight range
* We also keep track of backlight enablement and PWM backlight
enablement separately
* Since the currently set backlight level might not be the same as the
currently programmed PWM backlight level, we stop setting
panel->backlight.level with the currently programmed PWM backlight
level in panel->backlight.pwm_funcs->setup(). Instead, we rely
on the higher level backlight control functions to retrieve the
current PWM backlight level (in this case, intel_pwm_get_backlight()).
Note that there are still a few PWM backlight setup callbacks that
do actually need to retrieve the current PWM backlight level, although
we no longer save this value in panel->backlight.level like before.
Additionally, we drop the call to lpt_get_backlight() in
lpt_setup_backlight(), and avoid unconditionally writing the PWM value that
we get from it and only write it back if we're in CPU mode, and switching
to PCH mode. The reason for this is because in the original codepath for
this, it was expected that the intel_panel_bl_funcs->setup() hook would be
responsible for fetching the initial backlight level. On lpt systems, the
only time we could ever be in PCH backlight mode is during the initial
driver load - meaning that outside of the setup() hook, lpt_get_backlight()
will always be the callback used for retrieving the current backlight
level. After this patch we still need to fetch and write-back the PCH
backlight value if we're switching from CPU mode to PCH, but because
intel_pwm_setup_backlight() will retrieve the backlight level after setup()
using the get() hook, which always ends up being lpt_get_backlight(). Thus
- an additional call to lpt_get_backlight() in lpt_setup_backlight() is
made redundant.
v9:
* Drop the intel_panel_invert_pwm_level() call in lpt_setup_backlight()
* Remove leftover detritus from lpt_setup_backlight()
v8:
* Go back to getting initial brightness level with
intel_pwm_get_backlight(), the other fix we had was definitely wrong.
v7:
* Use panel->backlight.pwm_funcs->get() to get the backlight level in
intel_pwm_setup_backlight(), lest we upset lockdep
* Rebase
* Rename intel_panel_sanitize_pwm_level() to intel_panel_invert_pwm_level()
v6:
* Make sure to grab connection_mutex before calling
intel_pwm_get_backlight() in intel_pwm_setup_backlight()
v5:
* Fix indenting warnings from checkpatch
v4:
* Fix commit message
* Remove outdated comment in intel_panel.c
* Rename pwm_(min|max) to pwm_level_(min|max)
* Use intel_pwm_get_backlight() in intel_pwm_setup_backlight() instead of
indirection
* Don't move intel_dp_aux_init_bcklight_funcs() call to bottom of
intel_panel_init_backlight_funcs() quite yet
v3:
* Reuse intel_panel_bl_funcs() for pwm_funcs
* Explain why we drop lpt_get_backlight()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: thaytan@noraisin.net
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114221709.2261452-3-lyude@redhat.com
PLLC and PLLM are usually disabled on system suspend because all devices
which use these PLLs are either suspended or switched away to other clock
source. Don't enable unused PLLs on resume from suspend by keeping track
of the enable-state of the PLLs across suspend-resume.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On some platforms we need to trigger an extra async flip with
the async flip bit disabled, and then wait for the next vblank
until the async flip bit off state will actually latch.
Currently the w/a is just open coded for skl+ universal planes.
Instead of doing that lets reuse the .async_flip() hook for this
purpose since it needs to write the exact same set of registers.
In order to do this we'll just have the caller pass in the state
of the async flip bit explicitly.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-8-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Set up the async flip PLANE_CTL bit directly in the
.async_flip() hook. Neither .update_plane() nor .disable_plane()
ever need to set this so having it done by skl_plane_ctl_crtc()
is rather pointless.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-7-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Prepare for more platforms with async flip support by turning
the flip_done interrupt enable/disable into plane vfuncs.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-6-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
Only assign the plane->async_flip() vfunc when the plane supports
async flips. For now we keep this artificially limited to the primary
plane since thats the only thing the legacy page flip uapi can target
and there is no async flip support in the atomic uapi yet.
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-5-ville.syrjala@linux.intel.com
Reviewed-by: Karthik B S <karthik.b.s@intel.com>
I accidentally added the compliance test hacks only to
intel_dp_hotplug() which doesn't even get used on any DDI
platform. Put the same crap into intel_ddi_hotplug().
Cc: Imre Deak <imre.deak@intel.com>
Fixes: 193af12cd6 ("drm/i915: Shove the PHY test into the hotplug work")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114205046.8247-7-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Currently we claim to use TPS7 when using TPS4. That is just
confusing, so let's fix the debug print.
And while we're touching this let's add the customary
encoder id/name as well.
v2: Add MISSING_CASE() (Manasi)
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114205046.8247-2-ville.syrjala@linux.intel.com
DP spec says:
"The Source device shall start sending the idle pattern after
it has cleared the Training_Pattern byte in the DPCD."
Currently we do these in operations in the opposite order.
Swap them around to match the spec.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210118162107.18424-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Update PSI file description in cgroup-v2 docs to reflect the current
implementation.
tj: Changed cpu.pressure from read-only to read-write as suggested by
Johannes.
Signed-off-by: Odin Ugedal <odin@uged.al>
Acked-by: Dan Schatzberg <dschatzberg@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
EFI on x86_64 keeps track of the process's MM pointer by storing it
in a global struct called 'efi_scratch', which also used to contain
the mixed mode stack pointer. Let's clean this up a little bit, by
getting rid of the struct, and pushing the mm handling into the
callees entirely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
As a first step to removing the awkward 'struct efi_scratch' definition
that conveniently combines the storage of the mixed mode stack pointer
with the MM pointer variable that records the task's MM pointer while it
is being replaced with the EFI MM one, move the mixed mode stack pointer
into a separate variable.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move TPM related definitions that are only used in the EFI stub into
efistub.h, which is a local header.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Fix NULL pointer dereference when adding new psi monitor to the root
cgroup. PSI files for root cgroup was introduced in df5ba5be74 by using
system wide psi struct when reading, but file write/monitor was not
properly fixed. Since the PSI config for the root cgroup isn't
initialized, the current implementation tries to lock a NULL ptr,
resulting in a crash.
Can be triggered by running this as root:
$ tee /sys/fs/cgroup/cpu.pressure <<< "some 10000 1000000"
Signed-off-by: Odin Ugedal <odin@uged.al>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Dan Schatzberg <dschatzberg@fb.com>
Fixes: df5ba5be74 ("kernel/sched/psi.c: expose pressure metrics on root cgroup")
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: stable@vger.kernel.org # 5.2+
Signed-off-by: Tejun Heo <tj@kernel.org>
This series adds audio graph based sound card support for Tegra210
platforms like Jetson-TX1 an Jetson-Nano. The following preparatory
audio graph enhancement series is already merged.
* https://patchwork.kernel.org/project/alsa-devel/list/?series=375629&state=*
Following are the summary of changes:
* Add graph/audio-graph based schemas or schema updates for Tegra210
component and machine drivers.
* Add Tegra audio graph machine driver.
* Add required DT support for Jetson-TX1/Nano.
This work is based on earlier discussion of DPCM usage for Tegra
and simple card driver updates.
* https://lkml.org/lkml/2020/4/30/519
* https://lkml.org/lkml/2020/6/27/4
Original v6 series was sent about 6-7 weeks back. The dependency commit,
https://lore.kernel.org/alsa-devel/1610948585-16286-1-git-send-email-spujar@nvidia.com/
is now merged. Resending this now to appear in the top of the mail list.
Changelog
=========
v5 -> v6
--------
* Added ports or port description in YAML docs for Tegra AHUB
devices and graph card in patch 1/6 and 2/6. Reference of
audio-graph-port.yaml is used for AHUB devices.
* Dropped redundant NULL check return for of_device_get_match_data()
in patch 3/6.
* Added 'Reviewed-by' tag from Jon Hunter.
* No changes in remaining patches.
v4 -> v5
--------
* Audio graph related changes were sent in separate v5 series as
mentioned above and are dropped from current series.
* Graph and audio graph doc patches are dropped from this series
and are sent separately as mentioned above.
* Minor change with phandle label for TX1 and Nano platform DT files.
* No changes in other patches.
v3 -> v4
--------
* Added new patches to convert graph.txt and audio-graph-card.txt
to corresponding json-schema files. Later these references
are used in Tegra audio graph schema.
* AHUB component binding docs are updated to reflect the usage
of ports/port/endpoint
* More common stuff is moved into graph_parse_of() and this is
used by both generic and Tegra audio graph.
* DT binding for Tegra audio graph is updated to included "ports { }"
* As per the suggestion 'void *data' member is dropped from
'asoc_simple_priv' and instead container method is used to
maintain required custom data internal to Tegra audio graph.
v2 -> v3
--------
* Dropped new compatible addition in generic graph driver
after reviewing it with Morimoto-san. Instead added Tegra
audio graph driver and new compatibles are added in the same.
* Added new patches to expose new members for customization
in audio graph driver.
* Added new patch for Tegra audio graph driver and related
documentation.
* Minor change in below commit where mutex version of helper is used
"ASoC: audio-graph: Identify 'no_pcm' DAI links for DPCM"
* DT binding is updated to use the newly exposed compatibles
* No changes in other patches
v1 -> v2
--------
* Re-organized ports/endpoints description for ADMAIF and XBAR.
Updated DT patches accordingly.
* After above change, multiple Codec endpoint support is not
required and hence dropped for now. This will be considered
separately if at all required in future.
* Re-ordered patches in the series.
Sameer Pujar (6):
ASoC: dt-bindings: tegra: Add graph bindings
ASoC: dt-bindings: tegra: Add json-schema for Tegra audio graph card
ASoC: tegra: Add audio graph based card driver
arm64: defconfig: Enable Tegra audio graph card driver
arm64: tegra: Audio graph header for Tegra210
arm64: tegra: Audio graph sound card for Jetson Nano and TX1
.../sound/nvidia,tegra-audio-graph-card.yaml | 187 +++++++++++++++
.../bindings/sound/nvidia,tegra186-dspk.yaml | 18 +-
.../bindings/sound/nvidia,tegra210-admaif.yaml | 13 +-
.../bindings/sound/nvidia,tegra210-ahub.yaml | 13 +-
.../bindings/sound/nvidia,tegra210-dmic.yaml | 18 +-
.../bindings/sound/nvidia,tegra210-i2s.yaml | 18 +-
.../boot/dts/nvidia/tegra210-audio-graph.dtsi | 153 ++++++++++++
arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 262 +++++++++++++++++++++
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 146 ++++++++++++
arch/arm64/configs/defconfig | 1 +
sound/soc/tegra/Kconfig | 9 +
sound/soc/tegra/Makefile | 2 +
sound/soc/tegra/tegra_audio_graph_card.c | 251 ++++++++++++++++++++
13 files changed, 1085 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-audio-graph.dtsi
create mode 100644 sound/soc/tegra/tegra_audio_graph_card.c
--
2.7.4
On x86 scale invariace tends to be disabled during resume from
suspend-to-RAM, because the MPERF or APERF MSR values are not as
expected then due to updates taking place after the platform
firmware has been invoked to complete the suspend transition.
That, of course, is not desirable, especially if the schedutil
scaling governor is in use, because the lack of scale invariance
causes it to be less reliable.
To counter that effect, modify init_freq_invariance() to register
a syscore_ops object for scale invariance with the ->resume callback
pointing to init_counter_refs() which will run on the CPU starting
the resume transition (the other CPUs will be taken care of the
"online" operations taking place later).
Fixes: e2b0d619b4 ("x86, sched: check for counters overflow in frequency invariant accounting")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Link: https://lkml.kernel.org/r/1803209.Mvru99baaF@kreacher
This patch tracing workqueue name instead of it's address, the
new format is as follows.
workqueue_queue_work: work struct=0000000084e3df56 function=
drm_fb_helper_dirty_work workqueue=events req_cpu=256 cpu=1
This tell us to know which workqueue our work is queued.
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Enable the Tegra SoC Thermal driver that is used by Tegra132 and
Tegra210 platforms to be built as a module by default for ARM64 builds.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the Tegra SoC Thermal driver that is used by Tegra124 platforms
to be built as a module by default for ARM tegra_defconfig and
multi_v7_defconfig builds.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
After hibernation, HDA controller can't be runtime-suspended after
commit 215a22ed31 ("ALSA: hda: Refactor codjc PM to use
direct-complete optimization"), which enables direct-complete for HDA
codec.
The HDA codec driver didn't expect direct-complete will be disabled
after it returns a positive value from prepare() callback. However,
there are some places that PM core can disable direct-complete. For
instance, system hibernation or when codec has subordinates like LEDs.
So if the codec is prepared for direct-complete but PM core still calls
codec's suspend or freeze callback, partially revert the commit and take
the original approach, which uses pm_runtime_force_*() helpers to
ensure PM refcount are balanced. Meanwhile, still keep prepare() and
complete() callbacks to enable direct-complete and request a resume for
jack detection, respectively.
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Fixes: 215a22ed31 ("ALSA: hda: Refactor codec PM to use direct-complete optimization")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20210119152145.346558-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
'wq_sysfs_register()' in annotation for 'WQ_SYSFS' is unavailable,
change it to 'workqueue_sysfs_register()'.
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Support for the SDM630/660 series of SoCs was added to the driver:
document the qcom,sdm660-qusb2-phy compatible here.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114174718.398638-3-angelogioacchino.delregno@somainline.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SDM660 SoC uses the same configuration as MSM8996, but the
clock scheme uses a differential reference clock and none of
the SoCs in this series (630, 636 and others) have got a usable
PHY_CLK_SCHEME register in the TCSR for clk scheme detection.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114174718.398638-2-angelogioacchino.delregno@somainline.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The TCSR's PHY_CLK_SCHEME register is not available on all SoC
models, but some may still use a differential reference clock.
In preparation for these SoCs, add a se_clk_scheme_default
configuration entry and declare it to true for all currently
supported SoCs (retaining the previous defaults.
This patch brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114174718.398638-1-angelogioacchino.delregno@somainline.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the compatible strings for the USB2 PHYs found on QCOM
SM8250 & SM8350 SoCs.
Note that the SM8250 compatible is already in use in the dts and
driver implementation but was missing from the documentation.
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210115174723.7424-4-jackp@codeaurora.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for the USB DP & UNI PHYs found on SM8350. These use
version 5.0.0 of the QMP PHY IP and thus require new "V5"
definitions of the register offset macros for the QSERDES RX
and TX blocks. The QSERDES common and QPHY PCS blocks' register
offsets are largely unchanged from V4 so some of the existing
macros can be reused.
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210115174723.7424-3-jackp@codeaurora.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the compatible strings for the USB3 PHYs found on SM8150, SM8250
and SM8350 SoCs. These require separate subschemas due to the different
required clock entries.
Note the SM8150 and SM8250 compatibles have already been in place in
the dts as well as the driver implementation but were missing from
the documentation.
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210115174723.7424-2-jackp@codeaurora.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are too many logs on startup, e.g.
[ 8811.851497] cdns_fill_msg_resp: 2 callbacks suppressed
[ 8811.851497] intel-sdw intel-sdw.0: Msg Ack not received
[ 8811.851498] intel-sdw intel-sdw.0: Msg Ack not received
[ 8811.851499] intel-sdw intel-sdw.0: Msg Ack not received
[ 8811.851499] intel-sdw intel-sdw.0: Msg Ack not received
[ 8811.851500] intel-sdw intel-sdw.0: Msg Ack not received
[ 8811.851500] intel-sdw intel-sdw.0: Msg Ack not received
[ 8811.851502] intel-sdw intel-sdw.0: Msg ignored for Slave 0
[ 8811.851503] soundwire sdw-master-0: No more devices to enumerate
We can skip the 'Msg Ack not received' since it's typical of the
enumeration end, and conversely add the information on which command
fails.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210115053738.22630-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing code reports a NAK only when ACK=0
This is not aligned with the SoundWire 1.x specifications.
Table 32 in the SoundWire 1.2 specification shows that a Device shall
not set NAK=1 if ACK=1. But Table 33 shows the Combined Response
may very well be NAK=1/ACK=1, e.g. if another Device than the one
addressed reports a parity error.
NAK=1 signals a 'Command_Aborted', regardless of the ACK bit value.
Move the tests for NAK so that the NAK=1/ACK=1 combination is properly
detected according to the specification.
Fixes: 956baa1992 ('soundwire: cdns: Add sdw_master_ops and IO transfer support')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210115053738.22630-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current error log does not provide details on the type of
transfers and which address/count was requested. All this information
can help locate in which parts of the configuration process an error
occurred.
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210115053738.22630-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing debug log only mentions a state change, without providing
any details. For integration and stress-tests, it's helpful to see in
the dmesg log the reason for the state change.
The value is intended for power users and isn't converted as
human-readable values. But for the record each device has a 4-bit
status:
BIT(0): Unattached
BIT(1): Attached
BIT(2): Alert
BIT(3): Reserved (should not happen)
Example:
[ 121.891288] intel-sdw intel-sdw.0: Slave status change: 0x2
<< this shows a Device0 Attached
[ 121.891295] soundwire sdw-master-0: Slave attached, programming device number
[ 121.891629] soundwire sdw-master-0: SDW Slave Addr: 30025d071101
[ 121.891632] soundwire sdw-master-0: SDW Slave class_id 1, part_id 711, mfg_id 25d, unique_id 0, version 3
[ 121.892011] intel-sdw intel-sdw.0: Msg ignored for Slave 0
[ 121.892013] soundwire sdw-master-0: No more devices to enumerate
[ 121.892200] intel-sdw intel-sdw.0: Slave status change: 0x21
<< this shows the device now Attached as Device1 and Unattached as
Device0, i.e. a successful enumeration.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210115053738.22630-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>