Look up the LED from a GPIO machine descriptor table. The Geode LEDs
should be on the CS5535 companion chip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lkml.kernel.org/r/20201124085339.6181-3-linus.walleij@linaro.org
Look up the LED from a GPIO machine descriptor table. The Geode LEDs
should be on the CS5535 companion chip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lkml.kernel.org/r/20201124085339.6181-2-linus.walleij@linaro.org
Look up the LED from a GPIO machine descriptor table. The Geode LEDs
should be on the CS5535 companion chip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lkml.kernel.org/r/20201124085339.6181-1-linus.walleij@linaro.org
If the device tree is incorrectly configured, and attempts to
define a "no-map" reserved memory that overlaps with the kernel
data/code, the kernel would crash quickly after boot, with no
obvious clue about the nature of the issue.
For example, this would happen if we have the kernel mapped at
these addresses (from /proc/iomem):
40000000-41ffffff : System RAM
40080000-40dfffff : Kernel code
40e00000-411fffff : reserved
41200000-413e0fff : Kernel data
And we declare a no-map shared-dma-pool region at a fixed address
within that range:
mem_reserved: mem_region {
compatible = "shared-dma-pool";
reg = <0 0x40000000 0 0x01A00000>;
no-map;
};
To fix this, when removing memory regions at early boot (which is
what "no-map" regions do), we need to make sure that the memory
is not already reserved. If we do, __reserved_mem_reserve_reg
will throw an error:
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory
for node 'mem_region': base 0x0000000040000000, size 26 MiB
and the code that will try to use the region should also fail,
later on.
We do not do anything for non-"no-map" regions, as memblock
explicitly allows reserved regions to overlap, and the commit
that this fixes removed the check for that precise reason.
[ qperret: fixed conflicts caused by the usage of memblock_mark_nomap ]
Fixes: 094cb98179 ("of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlap")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20210115114544.1830068-3-qperret@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
Mark the memory region with NOMAP flag instead of completely removing it
from the memory blocks. That makes the FDT handling consistent with the EFI
memory map handling.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20210115114544.1830068-2-qperret@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add myself as maintainer of qcom audio drivers, as Patrick
has very little time to look at the patches.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Acked-by: Patrick Lai <plai@codeaurora.org>
Link: https://lore.kernel.org/r/20210115165520.6023-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit e7e832ce6f ("fs: add LSM-supporting anon-inode interface") adds
more kerneldoc description, but also a few new warnings on
anon_inode_getfd_secure() due to missing parameter descriptions.
Rephrase to appropriate kernel-doc for anon_inode_getfd_secure().
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Okay, the title may be a little "aggressive"? However, the qcom-labibb
driver wasn't really .. doing much.
The current form of this driver is only taking care of enabling or
disabling the regulators, which is pretty useless if they were not
pre-set from the bootloader, which sets them only if continuous
splash is enabled.
Moreover, some bootloaders are setting a higher voltage and/or a higher
current limit compared to what's actually required by the attached
hardware (which is, in 99.9% of the cases, a display) and this produces
a higher power consumption, higher heat output and a risk of actually
burning the display if kept up for a very long time: for example, this
is true on at least some Sony Xperia MSM8998 (Yoshino platform) and
especially on some Sony Xperia SDM845 (Tama platform) smartphones.
In any case, the main reason why this change was necessary for us is
that, during the bringup of Sony Xperia MSM8998 phones, we had an issue
with the bootloader not turning on the display and not setting the lab
and ibb regulators before booting the kernel, making it impossible to
powerup the display.
With this said, this patchset enables setting voltage, current limiting,
overcurrent and short-circuit protection.. and others, on the LAB/IBB
regulators.
Each commit in this patch series provides as many informations as
possible about what's going on and testing methodology.
Changes in v2:
- From Mark Brown review:
- Replaced some if branches with switch statements
- Moved irq get and request in probe function
- Changed short conditionals to full ones
- Removed useless check for ocp_irq_requested
- Fixed issues with YAML documentation
AngeloGioacchino Del Regno (7):
regulator: qcom-labibb: Implement voltage selector ops
regulator: qcom-labibb: Implement current limiting
regulator: qcom-labibb: Implement pull-down, softstart, active
discharge
dt-bindings: regulator: qcom-labibb: Document soft start properties
regulator: qcom-labibb: Implement short-circuit and over-current IRQs
dt-bindings: regulator: qcom-labibb: Document SCP/OCP interrupts
arm64: dts: pmi8998: Add the right interrupts for LAB/IBB SCP and OCP
.../regulator/qcom-labibb-regulator.yaml | 30 +-
arch/arm64/boot/dts/qcom/pmi8998.dtsi | 8 +-
drivers/regulator/qcom-labibb-regulator.c | 661 +++++++++++++++++-
3 files changed, 686 insertions(+), 13 deletions(-)
--
2.29.2
The timeout for an individual transaction w/ the Cadence IP is the same as
the entire resume operation for codecs.
This doesn't make sense, we need to have at least one order of magnitude
between individual transactions and the entire resume operation.
Set the timeout on the Cadence side to 500ms and 5s for the codec resume.
Both ASoC and SoundWire trees are fine for this series.
Pierre-Louis Bossart (2):
ASoC: codecs: soundwire: increase resume timeout
soundwire: cadence: reduce timeout on transactions
drivers/soundwire/cadence_master.c | 2 +-
sound/soc/codecs/max98373-sdw.c | 4 +++-
sound/soc/codecs/rt1308-sdw.c | 2 +-
sound/soc/codecs/rt5682.h | 2 +-
sound/soc/codecs/rt700-sdw.c | 2 +-
sound/soc/codecs/rt711-sdw.c | 2 +-
sound/soc/codecs/rt715-sdw.c | 2 +-
7 files changed, 9 insertions(+), 7 deletions(-)
--
2.17.1
Here's some minor code cleanups for the lpass-cpu driver. I noticed that
it casts away const from the driver data from DT. That's not great but
fixing it is a little more involved. I'll get to it later. There's also
some questionable clk_get() usage that should probably be
clk_get_optional(). For now this should help a little.
Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Cc: Srinivasa Rao <srivasam@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Stephen Boyd (4):
ASoC: qcom: Remove useless debug print
ASoC: qcom: Add some names to regmap configs
ASoC: qcom: Stop casting away __iomem for error pointers
ASoC: qcom: Remove duplicate error messages on ioremap
sound/soc/qcom/lpass-cpu.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
base-commit: 5c8fe583cc
--
https://chromeos.dev
Right now io_flush_timeouts() checks if the current number of events
is equal to ->timeout.target_seq, but this will miss some timeouts if
there have been more than 1 event added since the last time they were
flushed (possible in io_submit_flush_completions(), for example). Fix
it by recording the last sequence at which timeouts were flushed so
that the number of events seen can be compared to the number of events
needed without overflow.
Signed-off-by: Marcelo Diop-Gonzalez <marcelo827@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The Ux500 platforms have some memory carveouts set aside for
communicating with the modem and for the initial secure software
(ISSW). These areas are protected by the memory controller
and will result in an external abort if accessed like common
read/write memory.
On the legacy boot loaders, these were set aside by using
cmdline arguments such as this:
mem=96M@0 mem_mtrace=15M@96M mem_mshared=1M@111M
mem_modem=16M@112M mali.mali_mem=32M@128M mem=96M@160M
hwmem=127M@256M mem_issw=1M@383M mem_ram_console=1M@384M
mem=638M@385M
Reserve the relevant areas in the device tree instead. The
"mali", "hwmem", "mem_ram_console" and the trailing 1MB at the
end of the memory reservations in the list are not relevant for
the upstream kernel as these are nowadays replaced with
upstream technologies such as CMA. The modem and ISSW
reservations are necessary.
This was manifested in a bug that surfaced in response to
commit 7fef431be9 ("mm/page_alloc: place pages to tail in __free_pages_core()")
which changes the behaviour of memory allocations
in such a way that the platform will sooner run into these
dangerous areas, with "Unhandled fault: imprecise external
abort (0xc06) at 0xb6fd83dc" or similar: the real reason
turns out to be that the PTE is pointing right into one of
the reserved memory areas. We were just lucky until now.
We need to augment the DB8500 and DB8520 SoCs similarly
and also create a new include for the DB9500 used in the
Snowball since this does not have a modem and thus does
not need the modem memory reservation, albeit it needs
the ISSW reservation.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Cc: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20201213225517.3838501-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This was replaced with a kauditd_wait kthread long ago,
back in:
b7d1125817 (AUDIT: Send netlink messages from a separate kernel thread)
Update the stale comment.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node, however when control is
transferred from the middle of the loop, as in the case of a return
or break or goto, there is no decrement thus ultimately resulting in
a memory leak.
Fix a potential memory leak in arm-integrator-lm.c by inserting
of_node_put() before a return statement.
Issue found with Coccinelle.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200829174154.GA9319@Kaladin
Link: https://lore.kernel.org/r/20210112092549.251548-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from
#pwm-cells conversion.
- Fix duplicated bus node name for i.MX8MN SoC.
- Fix reset register offset on LS1028A SoC.
- Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device
index consistent with previous kernel version.
- Selecting ARM_GIC_V3 on non-CP15 processors to fix one build failure
with i.MX8M SoC driver.
- Fix typos with status property on imx6qdl-kontron-samx6i board.
- Fix duplicated regulator-name on imx6qdl-gw52xx board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl/9n4AUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5pmQf+O0hRAVWaMXk4SCs/CsQ4Z6XNPSfz
7DSnkz0Rg53uykv+oe57sryBHGI46vy/hJeD6/OX4XgnlxaKXwmdaE+sek85D01h
C/Gzg7lKDvr8vWKZcOzhTQhs9F+EuHSsS2zW9StUBBSlXx3r2h9f+kJOLihFwvQp
CCWU+eGXgRIqZme5tIX9tFqPP1PmNRfIbZWgLwx9e/foCMl64fJSIe45ik4WePeV
+WCB3xMP38q2bfhZQv164uIw8m5/nEb8dp9O+zNamy/RN1hQqRaq1sPAwrjcqs2z
whaVS3iaGRM/RyAdbxy1JCxM+yDNM0Vnby/txVgsEOE+a9mfl2D2upQ1NA==
=+e1G
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.11:
- Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from
#pwm-cells conversion.
- Fix duplicated bus node name for i.MX8MN SoC.
- Fix reset register offset on LS1028A SoC.
- Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device
index consistent with previous kernel version.
- Selecting ARM_GIC_V3 on non-CP15 processors to fix one build failure
with i.MX8M SoC driver.
- Fix typos with status property on imx6qdl-kontron-samx6i board.
- Fix duplicated regulator-name on imx6qdl-gw52xx board.
* tag 'imx-fixes-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming
ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status
ARM: imx: fix imx8m dependencies
ARM: dts: tbs2910: rename MMC node aliases
arm64: dts: ls1028a: fix the offset of the reset register
arm64: dts: imx8mn: Fix duplicate node name
ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight
Link: https://lore.kernel.org/r/20210112131224.GI28365@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I didn't touch this code since it served as a platform to introduce
ARMv7-M support to Linux. The only known machine that runs Linux has only
4 MiB of RAM (that originally only exists to hold the display's framebuffer).
There are no known users and no further use foreseeable, so drop the
code.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210115155130.185010-2-u.kleine-koenig@pengutronix.de'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Document suport for the Beacon EmbeddedWorks RZ/G2N and RZ/H kits.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYAFQswAKCRCKwlD9ZEnx
cCH1AQCDwQv0zeq5ppVgZGB9zDgpppfmHWjHheCC2BloilpVoQEA+SjHQp3KEYkB
QJSxiYTwbwuy7fsfOqVU6VW/9c8xmgY=
=bMmj
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v5.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.12
- Document suport for the Beacon EmbeddedWorks RZ/G2N and RZ/H kits.
* tag 'renesas-dt-bindings-for-v5.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Add Beacon RZ/G2N and RZ/G2H boards
Link: https://lore.kernel.org/r/20210115094610.2334058-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Occasionally, we are seeing some SuperSpeed devices resumes right after
being directed to U3. This commits add 500us delay to ensure LFPS
detector is disabled before sending ACK to firmware.
[ 16.099363] tegra-xusb 70090000.usb: entering ELPG
[ 16.104343] tegra-xusb 70090000.usb: 2-1 isn't suspended: 0x0c001203
[ 16.114576] tegra-xusb 70090000.usb: not all ports suspended: -16
[ 16.120789] tegra-xusb 70090000.usb: entering ELPG failed
The register write passes through a few flop stages of 32KHz clock domain.
NVIDIA ASIC designer reviewed RTL and suggests 500us delay.
Cc: stable@vger.kernel.org
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210115161907.2875631-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Once the command ring doorbell is rung the xHC controller will parse all
command TRBs on the command ring that have the cycle bit set properly.
If the driver just started writing the next command TRB to the ring when
hardware finished the previous TRB, then HW might fetch an incomplete TRB
as long as its cycle bit set correctly.
A command TRB is 16 bytes (128 bits) long.
Driver writes the command TRB in four 32 bit chunks, with the chunk
containing the cycle bit last. This does however not guarantee that
chunks actually get written in that order.
This was detected in stress testing when canceling URBs with several
connected USB devices.
Two consecutive "Set TR Dequeue pointer" commands got queued right
after each other, and the second one was only partially written when
the controller parsed it, causing the dequeue pointer to be set
to bogus values. This was seen as error messages:
"Mismatch between completed Set TR Deq Ptr command & xHCI internal state"
Solution is to add a write memory barrier before writing the cycle bit.
Cc: <stable@vger.kernel.org>
Tested-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210115161907.2875631-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PM reference count is not expected to be incremented on return in
these Tegra functions.
However, pm_runtime_get_sync() will increment the PM reference count
even on failure. Forgetting to put the reference again will result in
a leak.
Replace it with pm_runtime_resume_and_get() to keep the usage counter
balanced.
Fixes: fd67e9c6ed ("drm/tegra: Do not implement runtime PM")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra114 has GR2D hardware block, support it by the 2D driver.
Tested-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The device-tree compatibles are swapped in the code, correct them.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add comments clarifying use of the THI_STREAMID0 and THI_STREAMID1
registers.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Support newer VIC firmware by accepting the new magic number 0x10fe,
loading the full code segment instead of just the first page at boot
time, and skipping FCE setup if the firmware header indicates that
FCE is handled internally by the firmware.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For sdm845 ACPI boot, the URS (USB Role Switch) node in ACPI DSDT table
holds the memory resource, while interrupt resources reside in the child
nodes USB0 and UFN0. It adds USB0 host support by probing URS node,
creating platform device for USB0 node, and then retrieve interrupt
resources from USB0 platform device.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210115035057.10994-1-shawn.guo@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to the phy/usb bindings are converted into YAML schema and
also renamed, update entries.
Meanwhile add drivers/usb/host/mtk-xhci* files.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20201225075258.33352-11-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to usb-device.txt is converted into usb-device.yaml,
so modify reference file names at the same time.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20201225075258.33352-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch allows the administrator to configure the interface
name of a function using u_ether (e.g., eem, ncm, rndis).
Currently, all such interfaces, regardless of function type, are
always called usb0, usb1, etc. This makes it very cumbersome to
use more than one such type at a time, because userspace cannnot
easily tell the interfaces apart and apply the right
configuration to each one. Interface renaming in userspace based
on driver doesn't help, because the interfaces all have the same
driver. Without this patch, doing this require hacks/workarounds
such as setting fixed MAC addresses on the functions, and then
renaming by MAC address, or scraping configfs after each
interface is created to find out what it is.
Setting the interface name is done by writing to the same
"ifname" configfs attribute that reports the interface name after
the function is bound. The write must contain an interface
pattern such as "usb%d" (which will cause the net core to pick
the next available interface name starting with "usb").
This patch does not allow writing an exact interface name (as
opposed to a pattern) because if the interface already exists at
bind time, the bind will fail and the whole gadget will fail to
activate. This could be allowed in a future patch.
For compatibility with current userspace, when reading an ifname
that has not currently been set, the result is still "(unnamed
net_device)". Once a write to ifname happens, then reading ifname
will return whatever was last written.
Tested by configuring an rndis function and an ncm function on
the same gadget, and writing "rndis%d" to ifname on the rndis
function and "ncm%d" to ifname on the ncm function. When the
gadget was bound, the rndis interface was rndis0 and the ncm
interface was ncm0.
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Link: https://lore.kernel.org/r/20210113234222.3272933-1-lorenzo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the necessary PCI ID for Intel Alder Lake-P
devices.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210115094914.88401-5-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tiger Lake SOC (the versions of it that have integrated USB4
controller) may have two DWC3 controllers. One is part of
the PCH (Platform Controller Hub, i.e. the chipset) as
usual, and the other is inside the actual CPU block.
On all Intel platforms that have the two separate DWC3
controllers, the one inside the CPU handles USB3 and only
USB3 traffic, while the PCH version handles USB2 and USB2
alone. The reason for splitting the two busses like this is
to allow easy USB3 tunneling over USB4 connections. As USB2
is not tunneled over USB4, it has dedicated USB controllers
(both xHCI and DWC3).
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210115094914.88401-4-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By registering the software node directly instead of just
the properties in it, the driver can take advantage of also
the other features the software nodes have.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210115094914.88401-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This helper will register a software node and then assign
it to device at the same time. The function will also make
sure that the device can't have more than one software node.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210115094914.88401-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>