.get_state() can return an error indication. Make use of it to propagate
failing hardware accesses.
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
.get_state() can return an error indication. Make use of it to propagate
failing hardware accesses.
Acked-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Record and report an error code for the events. This allows to report
about failed calls without ambiguity and so gives a more complete
picture.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
.get_state() might fail in some cases. To make it possible that a driver
signals such a failure change the prototype of .get_state() to return an
error code.
This patch was created using coccinelle and the following semantic patch:
@p1@
identifier getstatefunc;
identifier driver;
@@
struct pwm_ops driver = {
...,
.get_state = getstatefunc
,...
};
@p2@
identifier p1.getstatefunc;
identifier chip, pwm, state;
@@
-void
+int
getstatefunc(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state)
{
...
- return;
+ return 0;
...
}
plus the actual change of the prototype in include/linux/pwm.h (plus some
manual fixing of indentions and empty lines).
So for now all drivers return success unconditionally. They are adapted
in the following patches to make the changes easier reviewable.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The PXA168, which is part of the MMP platform, also uses this driver.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221113233639.24244-7-doug@schmorgal.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add a pointer to the location of reference manuals for some of the
supported chips, and add a limitations section explaining the hardware's
PWM disable behavior.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221113233639.24244-6-doug@schmorgal.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Switch to abrupt shutdown mode in order to stop the clock as soon as
possible when PWM is disabled. This minimizes the possibility of the
clock being re-enabled while it is still in the process of turning off,
which will result in the clock ending up erroneously disabled.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221113233639.24244-5-doug@schmorgal.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Now that pxa_pwm_apply always enables the clock first, there is no need
for pxa_pwm_config to do any clock enabling/disabling.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221113233639.24244-4-doug@schmorgal.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
When disabling PWM, the duty cycle needs to be set to 0. This prevents
the previous duty cycle from showing up momentarily when the clock is
re-enabled next time.
Because the clock has to be running in order to configure the duty
cycle, unconditionally enable it early in pxa_pwm_apply and account for
the correct enable count at the end.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221113233639.24244-3-doug@schmorgal.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
These functions are only acting as wrappers for clk_prepare_enable and
clk_disable_unprepare now, so remove them to simplify the driver.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221113233639.24244-2-doug@schmorgal.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add support for PWM on MT7986 which has 2 PWM channels, one of them is
typically used for a temperature controlled fan.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Sam Shih <sam.shih@mediatek.com>
Link: https://lore.kernel.org/r/Y1K5ym1EL8kwzQEt@makrotopia.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
list_add() just overwrites the members of the element to add (here:
chip->list) without any checks, even in the DEBUG_LIST case. So save the
effort to initialize the list.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117211143.3817381-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
alloc_pwms() only identified a free range of IDs and this range was marked
as used only later by pwmchip_add(). Instead let alloc_pwms() already do
the marking (which makes the function actually allocating the range and so
justifies the function name). This way access to the allocated_pwms
bitfield is limited to two functions only.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117211143.3817381-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This simplifies error handling as the need for goto error handling goes
away and at the end of the function the code can be simplified as this
code isn't used in the error case any more.
Now memory allocation and the call to of_pwmchip_add() are done without
holding the lock. Both don't access the data structures protected by
&pwm_lock.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117211143.3817381-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To simplify validation of the used locking, document for the global pwm
mutex what it actually protects against concurrent access. Also note for
two functions modifying these that pwm_lock is held by the caller.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117211143.3817381-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
According to MT7622 Reference Manual for Development Board v1.0 the PWM
unit found in the MT7622 SoC also comes with the PWM_CK_26M_SEL register
at offset 0x210 just like other modern MediaTek ARM64 SoCs.
And also MT7622 sets that register to 0x00000001 on reset which is
described as 'Select 26M fix CLK as BCLK' in the datasheet.
Hence set has_ck_26m_sel to true also for MT7622 which results in the
driver writing 0 to the PWM_CK_26M_SEL register which is described as
'Select bus CLK as BCLK'.
Fixes: 0c0ead7623 ("pwm: mediatek: Always use bus clock")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/Y1iF2slvSblf6bYK@makrotopia.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
lpc18xx_pwm_probe() only ensures clk_rate <= NSEC_PER_SEC, the following
reasoning is right even under this slightly lesser condition.
Fixes: 8933d30c5f ("pwm: lpc18xx: Fix period handling")
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20221108153013.132514-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
In the original mtk_disp_pwm_get_state() function wrongly uses bit 0 of
CON0 to judge if the PWM is enabled.
However that is indicated by a bit (at a machine dependent position) in
the DISP_PWM_EN register. Fix this accordingly.
Fixes: 3f2b167349 ("pwm: mtk-disp: Implement atomic API .get_state()")
Signed-off-by: xinlei lee <xinlei.lee@mediatek.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/1666172538-11652-1-git-send-email-xinlei.lee@mediatek.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
As was documented in commit 0f02f491b7 ("pwm: sifive: Reduce time the
controller lock is held") a caller of pwm_sifive_update_clock() must
hold the mutex. So fix pwm_sifive_clock_notifier() to grab the lock.
While this necessity was only documented later, the race exists since
the driver was introduced.
Fixes: 9e37a53eb0 ("pwm: sifive: Add a driver for SiFive SoC PWM")
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20221018061656.1428111-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The skb is delivered to napi_gro_receive() which may free it, after
calling this, dereferencing skb may trigger use-after-free.
Fixes: 542ae60af2 ("net: hisilicon: Add Fast Ethernet MAC driver")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20221203094240.1240211-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The nicvf_probe() won't destroy workqueue when register_netdev()
failed. Add destroy_workqueue err handle case to fix this issue.
Fixes: 2ecbe4f4a0 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them.")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20221203094125.602812-1-liuyongqiang13@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The skb is delivered to napi_gro_receive() which may free it, after calling this,
dereferencing skb may trigger use-after-free.
Fixes: 1c59eb678c ("ravb: Fillup ravb_rx_gbeth() stub")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20221203092941.10880-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* for-next/sve-state:
arm64/fp: Use a struct to pass data to fpsimd_bind_state_to_cpu()
arm64/sve: Leave SVE enabled on syscall if we don't context switch
arm64/fpsimd: SME no longer requires SVE register state
arm64/fpsimd: Load FP state based on recorded data type
arm64/fpsimd: Stop using TIF_SVE to manage register saving in KVM
arm64/fpsimd: Have KVM explicitly say which FP registers to save
arm64/fpsimd: Track the saved FPSIMD state type separately to TIF_SVE
KVM: arm64: Discard any SVE state when entering KVM guests
* for-next/selftests:
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
kselftest/arm64: Set test names prior to starting children
kselftest/arm64: Use preferred form for predicate load/stores
kselftest/arm64: fix array_size.cocci warning
kselftest/arm64: fix array_size.cocci warning
kselftest/arm64: Print ASCII version of unknown signal frame magic values
kselftest/arm64: Remove validation of extra_context from TODO
kselftest/arm64: Provide progress messages when signalling children
kselftest/arm64: Check that all children are producing output in fp-stress
Since Linux moved to git, CVS is not relevant any more.
Signed-off-by: Conghui Wang <conghui.wang@hotmail.com>
[ rjw: Subject and changelog edits, dropped trailing spaces ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* for-next/kprobes:
arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
arm64: Prohibit instrumentation on arch_stack_walk()
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* for-next/kdump:
arm64: kdump: Support crashkernel=X fall back to reserve region above DMA zones
arm64: kdump: Provide default size when crashkernel=Y,low is not specified
Stop trying to set boost MSRs on CPUs that don't support boost.
This corrects a bug in the recent patch "Defer setting boost MSRs".
Fixes: 13fdbc8b8d ("cpufreq: ACPI: Defer setting boost MSRs")
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector Martin).
- New cpufreq driver for Apple SoC CPU P-states (Hector Martin).
- Lots of Qualcomm cpufreq driver updates, that include CPU clock
provider support, generic cleanups or reorganization, fixed a
potential memleak and the return value of cpufreq_driver->get()
(Manivannan Sadhasivam, and Chen Hui).
- Few updates to Qualcomm cpufreq driver's DT bindings, that include
support for CPU clock provider, fixing missing cache related
properties, and support for QDU1000/QRU1000 (Manivannan Sadhasivam,
Rob Herring, and Melody Olvera).
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).
- tegra186: Use flexible array to simplify memory allocation (Christophe
JAILLET).
-----BEGIN PGP SIGNATURE-----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=8cze
-----END PGP SIGNATURE-----
Merge tag 'cpufreq-arm-updates-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq ARM updates for 6.2 from Viresh Kumar:
"- Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector
Martin).
- New cpufreq driver for Apple SoC CPU P-states (Hector Martin).
- Lots of Qualcomm cpufreq driver updates, that include CPU clock
provider support, generic cleanups or reorganization, fixed a
potential memleak and the return value of cpufreq_driver->get()
(Manivannan Sadhasivam, and Chen Hui).
- Few updates to Qualcomm cpufreq driver's DT bindings, that include
support for CPU clock provider, fixing missing cache related
properties, and support for QDU1000/QRU1000 (Manivannan Sadhasivam,
Rob Herring, and Melody Olvera).
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).
- tegra186: Use flexible array to simplify memory allocation (Christophe
JAILLET)."
* tag 'cpufreq-arm-updates-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
cpufreq: tegra186: Use flexible array to simplify memory allocation
cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states
cpufreq: qcom-hw: Add CPU clock provider support
dt-bindings: cpufreq: cpufreq-qcom-hw: Add cpufreq clock provider
cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()
cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
arm64: dts: ti: k3-am625-sk: Add 1.4GHz OPP
cpufreq: ti: Enable ti-cpufreq for ARCH_K3
arm64: dts: ti: k3-am625: Introduce operating-points table
cpufreq: dt-platdev: Blacklist ti,am625 SoC
cpufreq: ti-cpufreq: Add support for AM625
dt-bindings: cpufreq: qcom: Add missing cache related properties
cpufreq: qcom-hw: Move soc_data to struct qcom_cpufreq
cpufreq: qcom-hw: Use cached dev pointer in probe()
cpufreq: qcom-hw: Allocate qcom_cpufreq_data during probe
cpufreq: qcom-hw: Remove un-necessary cpumask_empty() check
cpufreq: Generalize of_perf_domain_get_sharing_cpumask phandle format
A previous change amended try_to_freeze_tasks() with the "what"
variable pointing to a string describing the group of tasks subject to
the freezing which may be used in the error message in there too, so
make that happen.
Accordingly, update sleepgraph.py to catch the modified error message
as appropriate.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
