Commit graph

1,169,205 commits

Author SHA1 Message Date
Tony Lindgren
2f6aa61d87 Input: omap4-keypad - implement errata check for lost key-up events
We are still missing handling for errata i689 related issues for the
case where we never see a key up interrupt for the last pressed key.

To fix the issue, we must scan the key state again after the keyboard
controller has idled to check if a key up event was missed. This is
described in the omap4 silicon errata documentation for Errata ID i689
"1.32 Keyboard Key Up Event Can Be Missed":

"When a key is released for a time shorter than the debounce time,
 in-between 2 key press (KP1 and KP2), the keyboard state machine will go
 to idle mode and will never detect the key release (after KP1, and also
 after KP2), and thus will never generate a new IRQ indicating the key
 release."

We can use PM runtime autosuspend features to check the keyboard state
after it enters idle.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/X/vrygoBxzGyXhfc@atomide.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-10 22:23:04 -08:00
Tony Lindgren
29bf35e5ee Input: omap4-keypad - use PM runtime autosuspend
Implement PM runtime autosuspend support to prepare for adding handling to
clear stuck last pressed key in the following patches. The hardware has
support for autoidle and can wake up to keypress events.

Let's also update omap4_keypad_probe() to use dev instead of &pdev->dev
since we already have it from the earlier changes.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/X/vqCs5/EDURprAJ@atomide.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-10 22:23:04 -08:00
Tony Lindgren
98b0c88d4b Input: omap4-keypad - move rest of key scanning to a separate function
Let's move rest of the key scanning code to omap4_keypad_scan_keys().
We will use omap4_keypad_scan_keys() also for implementing errata
handling to clear the stuck last key in the following patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210110190529.46135-4-tony@atomide.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-10 22:23:02 -08:00
Tony Lindgren
905dbf1d39 Input: omap4-keypad - scan keys in two phases and simplify with bitmask
Because of errata i689 the keyboard can idle with state where no key
up interrupts are seen until after the next key press.

This means we need to first check for any lost key up events before
scanning for new down events.

For example, rapidly pressing shift-shift-j can sometimes produce a J
instead of j. Let's fix the issue by scanning the keyboard in two
phases. First we scan for any key up events that we may have missed,
and then we scan for key down events.

Let's also simplify things with for_each_set_bit() as suggested by
Dmitry Torokhov <dmitry.torokhov@gmail.com>.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210110190529.46135-3-tony@atomide.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-10 22:23:00 -08:00
Tony Lindgren
7e0541b257 Input: omap4-keypad - disable unused long interrupts
We are not using the long events and they produce extra interrupts.
Let's not enable them at all.

Note that also the v3.0.8 Linux Android kernel has long interrupts
disabled.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210110190529.46135-2-tony@atomide.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-10 22:22:58 -08:00
Dmitry Torokhov
60dc451194 Input: omap4-keypad - switch to use managed resources
Now that input core supports devres-managed input devices we can clean
up this driver a bit.

Link: https://lore.kernel.org/r/X/qfJKiM21uyksYl@google.com
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-10 22:22:57 -08:00
Koen Vandeputte
5a22747b76 ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming
2 regulator descriptions carry identical naming.

This leads to following boot warning:
[    0.173138] debugfs: Directory 'vdd1p8' with parent 'regulator' already present!

Fix this by renaming the one used for audio.

Fixes: 5051bff331 ("ARM: dts: imx: ventana: add LTC3676 PMIC support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Cc: stable@vger.kernel.org # v4.11
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 11:41:17 +08:00
Teresa Remmet
88f7f6bcca arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP
Add initial support for phyBOARD-Pollux-i.MX8MP.
Supported basic features:
	* eMMC
	* i2c EEPROM
	* i2c RTC
	* i2c LED
	* PMIC
	* debug UART
	* SD card
	* 1Gbit Ethernet (fec)
	* watchdog

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 11:38:51 +08:00
Teresa Remmet
d22782c03d bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings
Add devicetree bindings for i.MX8MP based phyCORE-i.MX8MP
and phyBOARD-Pollux RDK.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 11:37:44 +08:00
Teresa Remmet
4a63902c2b arm64: defconfig: Enable PCA9532 support
Enable i2c led expander PCA9532 module support populated on
phyBOARD-Pollux-i.MX8M Plus.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 11:37:24 +08:00
Teresa Remmet
411539577f arm64: defconfig: Enable rv3028 i2c rtc driver
Enable rv3028 i2c rtc driver as module. It is populated on
phyBOARD-Pollux-i.MX8M Plus.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 11:37:14 +08:00
Oleksij Rempel
062bf67d83 ARM: dts: add Protonic PRTI6G board
Protonic PRTI6G is a reference platform for industrial, safety critical
applications

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 11:35:52 +08:00
Oleksij Rempel
60f95bf61e dt-bindings: arm: fsl: add Protonic PRTI6G board
Add Protonic Holland PRTI6G, iMX6UL based board

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 11:35:37 +08:00
Laurent Pinchart
2e0e77e4b8 ARM: dts: imx6q(dl): Move 'port' nodes under 'ports' for HDMI encoder
In preparation for the conversion of the DWC HDMI TX device tree
bindings to YAML, move the HDMI encoder's 'port' nodes under a 'ports'
node. The 'ports' node is optional in the OF graph implementation, but
YAML bindings require it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 11:34:06 +08:00
Oleksij Rempel
f3604ba14b ARM: dts: add Protonic MVT board
PRTMVT is the reference platform for Protonic industrial touchscreen terminals.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 11:32:05 +08:00
Oleksij Rempel
002c73209e dt-bindings: arm: fsl: add Protonic MVT board
Add Protonic MVT imx6dl based board

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 11:31:49 +08:00
Marco Felsch
70b6ff4c54 ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status
Fix typo so the gpio i2c busses are really disabled.

Fixes: 2125212785 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 11:30:06 +08:00
Tim Harvey
6f30b27c5e arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits
The Gateworks Venice GW71xx-0x/GW72xx-0x/GW73xx-0x are development
kits consisting of a GW700x SoM and a Baseboard. Future SoM's such
as the GW701x will create additional combinations.

The GW700x SoM contains:
 - i.MX 8M Mini SoC
 - LPDDR4 DRAM
 - eMMC FLASH
 - Gateworks System Controller (eeprom/pushbutton/reset/voltage-monitor)
 - GbE PHY connected to the i.MX 8M Mini FEC
 - Power Management IC

The GW71xx Baseboard contains:
 - 1x MiniPCIe Socket with USB2.0, PCIe, and SIM
 - 1x RJ45 GbE (i.MX 8M Mini FEC)
 - I/O connector with 1x-SPI/1x-I2C/1x-UART/4x-GPIO signals
 - PCIe Clock generator
 - GPS and accelerometer
 - 1x USB 2.0 Front Panel connector
 - wide range power supply

The GW72xx Baseboard contains:
 - 2x MiniPCIe Socket with USB2.0, PCIe, and SIM
 - 2x RJ45 GbE (i.MX 8M Mini FEC and LAN743x)
 - 1x MicroSD connector
 - 1x USB 2.0 Front Panel connector
 - 1x SPI connector
 - 1x Serial connector supporting 2x-UART or 1x-UART configured as 1 of:
   RS232 w/ flow-control, RS485, RS422
 - PCIe Clock generator
 - GPS and accelerometer
 - Media Expansion connector (MIPI-CSI/MIPI-DSI/GPIO/I2S)
 - I/O connector with 2x-ADC,2x-GPIO,1x-UART,1x-I2C
 - wide range power supply

The GW73xx Baseboard contains:
 - 3x MiniPCIe Socket with USB2.0, PCIe, and SIM
 - 2x RJ45 GbE (i.MX 8M Mini FEC and LAN743x)
 - 1x MicroSD connector
 - 1x USB 2.0 Front Panel connector
 - 1x SPI connector
 - 1x Serial connector supporting 2x-UART or 1x-UART configured as 1 of:
   RS232 w/ flow-control, RS485, RS422
 - WiFi/BT
 - PCIe Clock generator
 - GPS and accelerometer
 - Media Expansion connector (MIPI-CSI/MIPI-DSI/GPIO/I2S)
 - I/O connector with 2x-ADC,2x-GPIO,1x-UART,1x-I2C
 - wide range power supply

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 11:28:54 +08:00
Tim Harvey
46a7867dd7 dt-bindings: arm: fsl: Add binding for Gateworks boards with IMX8MM
Add bindings for the Gateworks Venice Development kit boards with
IMX8MM System on Module.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 11:26:27 +08:00
Alice Guo
7d981405d0 soc: imx8m: change to use platform driver
Directly reading ocotp register depends on that bootloader enables ocotp
clk, which is not always effective, so change to use nvmem API. Using
nvmem API requires to support driver defer probe and thus change
soc-imx8m.c to use platform driver.

The other reason is that directly reading ocotp register causes kexec
kernel hang because the 1st kernel running will disable unused clks
after kernel boots up, and then ocotp clk will be disabled even if
bootloader enables it. When kexec kernel, ocotp clk needs to be enabled
before reading ocotp registers, and nvmem API with platform driver
supported can accomplish this.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 10:46:09 +08:00
Alice Guo
cbff23797f arm64: dts: imx8m: add NVMEM provider and consumer to read soc unique ID
In order to be able to use NVMEM APIs to read soc unique ID, add the
nvmem data cell and name for nvmem-cells to the "soc" node, and add a
nvmem node which provides soc unique ID to efuse@30350000.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 10:45:34 +08:00
Alice Guo
ce58459d8c arm64: dts: imx8m: add SoC ID compatible
Add compatible string to .dtsi files for binding of imx8_soc_info and
device.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 10:45:14 +08:00
Alice Guo
267d467140 dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID
Add DT Binding doc for the Unique ID of i.MX 8M series.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 10:05:53 +08:00
Arnd Bergmann
097530bf8c ARM: imx: fix imx8m dependencies
Selecting ARM_GIC_V3 on non-CP15 processors leads to build failures
like

arch/arm/include/asm/arch_gicv3.h: In function 'write_ICC_AP1R3_EL1':
arch/arm/include/asm/arch_gicv3.h:36:40: error: 'c12' undeclared (first use in this function)
   36 | #define __ICC_AP1Rx(x)   __ACCESS_CP15(c12, 0, c9, x)
      |                                        ^~~

Add a dependency to only enable the gic driver when building for
at an ARMv7 target, which is the closes approximation to the ARMv8
processor that is actually in this chip.

Fixes: fc40200ebf ("soc: imx: increase build coverage for imx8m soc driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 09:36:11 +08:00
Michael Walle
8e9f7797bc arm64: dts: lx2160a: use constants in the clockgen phandle
Now that we have constants, use them. This is just a mechanical change.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 09:20:35 +08:00
Michael Walle
b0ccb208d7 arm64: dts: ls208xa: use constants in the clockgen phandle
Now that we have constants, use them. This is just a mechanical change.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 09:20:32 +08:00
Michael Walle
f9799323bd arm64: dts: ls1088a: use constants in the clockgen phandle
Now that we have constants, use them. This is just a mechanical change.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 09:20:30 +08:00
Michael Walle
973fb5e174 arm64: dts: ls1046a: use constants in the clockgen phandle
Now that we have constants, use them. This is just a mechanical change.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 09:20:28 +08:00
Michael Walle
7525022da2 arm64: dts: ls1043a: use constants in the clockgen phandle
Now that we have constants, use them. This is just a mechanical change.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 09:20:25 +08:00
Michael Walle
99314eb13c arm64: dts: ls1028a: use constants in the clockgen phandle
Now that we have constants, use them. This is just a mechanical change.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 09:20:23 +08:00
Michael Walle
70db442df6 arm64: dts: ls1012a: use constants in the clockgen phandle
Now that we have constants, use them. This is just a mechanical change.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 09:20:16 +08:00
Martin Kepplinger
1773b8d669 arm64: dts: imx8mq-librem5-r3: workaround i2c1 issue with 1GHz cpu voltage
This is a workaround for a hardware bug in the r3 revision that basically would
stop the system due to traffic on the i2c1 bus. A cpu voltage change would
trigger such traffic and that's what is avoided in order to work around it.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 09:20:13 +08:00
Martin Kepplinger
6a67d8fbee arm64: dts: imx8mq-librem5: Move usdhc clocks assignment to board DT
According to commit e045f044e8 ("arm64: dts: imx8mq: Move usdhc clocks
assignment to board DT") add the clocks assignment to imx8mq-librem5.dtsi
too.

Fixes: e045f044e8 ("arm64: dts: imx8mq: Move usdhc clocks assignment to board DT")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 09:19:46 +08:00
Tian Tao
e695e62306 drm/hisilicon: Delete the empty function mode_valid
Based on the drm_connector_mode_valid, if the hibmc implementation
of mode_valid only returns MODE_OK, then we need not implement the
mode_valid function.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1610102465-36501-1-git-send-email-tiantao6@hisilicon.com
2021-01-10 19:48:01 -05:00
Soeren Moch
fd25c88366 ARM: dts: tbs2910: rename MMC node aliases
to be consistent with kernel versions up to v5.9 (mmc aliases not used here).
usdhc1 is not wired up on this board and therefore cannot be used.
Start mmc aliases with usdhc2.

Signed-off-by: Soeren Moch <smoch@web.de>
Cc: stable@vger.kernel.org                # 5.10.x
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 08:36:55 +08:00
Martin Kepplinger
c003b15b4c arm64: dts: imx8mq-librem5: add pinctrl for the touchscreen description
In order for the touchscreen interrupt line to work, describe it properly.
Otherwise it can work if defaults are ok, but we cannot be sure.

Fixes: 8f0216b006 ("arm64: dts: Add a device tree for the Librem 5 phone")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 08:27:40 +08:00
Martin Kepplinger
84b1f57d10 arm64: dts: imx8mq-librem5: add vin-supply to VDD_1V8
buck7 is the supply here. Also, fix alphabetical ordering.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 08:25:57 +08:00
Guido Günther
62270eeb2b arm64: dts: imx8mq: Add clock parents for mipi dphy
This makes sure the clock tree setup for the dphy is not dependent on
other components.

Without this change bringing up the display can fail like

  kernel: phy phy-30a00300.dphy.2: Invalid CM/CN/CO values: 165/217/1
  kernel: phy phy-30a00300.dphy.2: for hs_clk/ref_clk=451656000/593999998 ~ 165/217

if LCDIF doesn't set up that part of the clock tree first. This was
noticed when testing the Librem 5 devkit with defconfig. It doesn't
happen when modules are built in.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 08:25:57 +08:00
Guido Günther
9184f0b220 arm64: defconfig: Enable Librem 5 devkit components
The Librem 5 devkit is based on NXP's i.MX8MQ. Schematics are at
https://source.puri.sm/Librem5/dvk-mx8m-bsb.

This enables drivers for the following hardware components that aren't
yet enabled in defconfig:

- Goodix GT5688 touchscreen
- iMX8MQ's PWM for the LCD backlight
- TI BQ25896 charge controller
- NXP SGTL5000 audio codec
- Microcrystal RV-4162-C7 RTC
- magnetometer: CONFIG_IIO_ST_MAGN_3AXIS
- the SIMCom SIM7100E/A modem
- NXP PTN5110HQZ usb-c controller

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11 08:22:45 +08:00
Dinghao Liu
869f4fdaf4 netfilter: nf_nat: Fix memleak in nf_nat_init
When register_pernet_subsys() fails, nf_nat_bysource
should be freed just like when nf_ct_extend_register()
fails.

Fixes: 1cd472bf03 ("netfilter: nf_nat: add nat hook register functions to nf_nat")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-01-11 00:34:11 +01:00
Linus Torvalds
7c53f6b671 Linux 5.11-rc3 v5.11-rc3 2021-01-10 14:34:50 -08:00
Trond Myklebust
896567ee7f NFS: nfs_igrab_and_active must first reference the superblock
Before referencing the inode, we must ensure that the superblock can be
referenced. Otherwise, we can end up with iput() calling superblock
operations that are no longer valid or accessible.

Fixes: ea7c38fef0 ("NFSv4: Ensure we reference the inode for return-on-close in delegreturn")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-10 16:29:28 -05:00
Trond Myklebust
113aac6d56 NFS: nfs_delegation_find_inode_server must first reference the superblock
Before referencing the inode, we must ensure that the superblock can be
referenced. Otherwise, we can end up with iput() calling superblock
operations that are no longer valid or accessible.

Fixes: e39d8a186e ("NFSv4: Fix an Oops during delegation callbacks")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-10 16:29:28 -05:00
Linus Torvalds
20210a9846 Kbuild fixes for v5.11
- Search for <ncurses.h> in the default header path of HOSTCC
 
  - Tweak the option order to be kind to old BSD awk
 
  - Remove 'kvmconfig' and 'xenconfig' shorthands
 
  - Fix documentation
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl/7YsgVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGMywQAKXnzI0nOsJWCsRNhYaOvgR/xmEl
 Tu/E+fN6aL/BGtIfkrdJzYRCa5UWONYMQuACvDhXarR1/Stkag9XyWY+rRTHK6In
 rYGb2NmjKUsJ4mtZtpPY7lyMgizZJX63Ba8m+Np8U3dpHuCk2OncOJFszJAiPqoN
 RbJiUNTT8F0/W827kvDcbdWc8iiXN75mqblFZQBSG71kiv/l/3Jsz/FE5980pGfv
 XfZbokOKBGpEAnzHCt4wfodlTQxsezzbgkrzquVhosJYidXcl3VMnoJMfPFFJwIv
 pxgIyrdUxgyuM3iqwymiXxJtv+wVUC9lTEgYp4KgIy0kj2ACe59u6wAcjSDoHWEu
 pImhidGu0dZTrIltT4IE2WoqsFqtjkMCAM1DvLlgPS8GROL0IK0l9AnXAyCUoSYE
 RMhYO3K9G6z0PGvNGJcxPttih8na/hLjvUwbFWUGlltadmYqSLA16MO4c3NOgqMR
 RbLJ5K6c/tKe9ktW8f+FVJlcRnEebEbG9hzQLG5W/umEesxUQHFVe44nmCEJkyVB
 tQdCXCqiBOcSoJC+pYceuGG/vUhX+Nmm+zMyI5pTwAvBL7Yx4Ef4HOIMlbKCLT6z
 HsC/CtfIb1IEfNbKq+9nkHZRnO8lNAORJmyFzTwDYDQJWvNTKvDviJo5V7i9QfEm
 0WVOr9qCIlOWJvGe
 =T0vB
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Search for <ncurses.h> in the default header path of HOSTCC

 - Tweak the option order to be kind to old BSD awk

 - Remove 'kvmconfig' and 'xenconfig' shorthands

 - Fix documentation

* tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Documentation: kbuild: Fix section reference
  kconfig: remove 'kvmconfig' and 'xenconfig' shorthands
  lib/raid6: Let $(UNROLL) rules work with macOS userland
  kconfig: Support building mconf with vendor sysroot ncurses
  kconfig: config script: add a little user help
  MAINTAINERS: adjust GCC PLUGINS after gcc-plugin.sh removal
2021-01-10 13:24:55 -08:00
Linus Torvalds
688daed2e5 SCSI fixes on 20210110
This is two driver fixes (megaraid_sas and hisi_sas).  The megaraid
 one is a revert of a previous revert of a cpu hotplug fix which
 exposed a bug in the block layer which has been fixed in this merge
 window and the hisi_sas performance enhancement comes from switching
 to interrupt managed completion queues, which depended on the addition
 of devm_platform_get_irqs_affinity() which is now upstream via the irq
 tree in the last merge window.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX/tF/SYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishTYGAQDzi9Zi
 iJ0uut1ex6io0q/X+DU7vwYFSfx9wILi8k8jFwD8C9O4pPfdvZyfPqLx/ol90lxW
 fEIZK6p7MozgoSw7s9k=
 =jp38
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is two driver fixes (megaraid_sas and hisi_sas).

  The megaraid one is a revert of a previous revert of a cpu hotplug fix
  which exposed a bug in the block layer which has been fixed in this
  merge window.

  The hisi_sas performance enhancement comes from switching to interrupt
  managed completion queues, which depended on the addition of
  devm_platform_get_irqs_affinity() which is now upstream via the irq
  tree in the last merge window"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: hisi_sas: Expose HW queues for v2 hw
  Revert "Revert "scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug""
2021-01-10 13:17:21 -08:00
Linus Torvalds
ed41fd071c block-5.11-2021-01-10
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/7KA0QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpn6WEACeUa97qyzm7G8/E5ejBL6lXSTRXNc8qa+h
 YCdrDltkqs6OHAuEyUCwGw3zPmb7fp4M5RLZ/Dp9EtMwld45HfoN6mpRe0+i4U96
 iAkHMNUo6ytp3wXX1XKgZ0FhcSOSwkQK8CMzmLPn+pxkDYzQPFg38AUISPpoDA/L
 YNh4tEiHHd5oprHIzludE00m2i1oYNrBcmUe27sKxR0mak0kEJtxr4cXLrqBtN3k
 9C31A0gstCINSHmQPAcRvFerDxDM0WPYQ7K6UEXfkCfbyf6i+1eG/qLUwUCdm9MD
 Rjot6dXzQ2LzqJbaAZndjJRDRZx2xpC2TNlNaBjYzSOC6AXSY0MKiZBCnH/i/OoZ
 f0Bq/k7LVeMbyu02cgIis4DPLabfG+XQUOniu4HQTrzK8+neApAlCwINc73cvQOb
 hBS+LfUVqP6K6g3oVGSvqG01wj2HK69SWMNKTr9GZ3GIqrcWYtA/JnqFfTE7/KwC
 H7rkPL8i3+NBXmjjz6hm8hx3MrnekKJpsdCBicm9OOYqJRbkGVjoUYeDFz5MElfp
 k71u2WDQ81aiqfWajsJkZaUFxZgUrRzuWeyBZiQQP9kJEMzUUiDSg4K+0WJhk5bO
 Y0EX0sdCz8k9IBKfi2+FcF5dYj3RDolALmBDrrcfchTW0h7vxMpn4rr/ueN7gViz
 rW/Gj9pRsA==
 =CClj
 -----END PGP SIGNATURE-----

Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - Missing CRC32 selections (Arnd)

 - Fix for a merge window regression with bdev inode init (Christoph)

 - bcache fixes

 - rnbd fixes

 - NVMe pull request from Christoph:
    - fix a race in the nvme-tcp send code (Sagi Grimberg)
    - fix a list corruption in an nvme-rdma error path (Israel Rukshin)
    - avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar)
    - add the susystem NQN quirk for a Samsung driver (Gopal Tiwari)
    - fix two compiler warnings in nvme-fcloop (James Smart)
    - don't call sleeping functions from irq context in nvme-fc (James Smart)
    - remove an unused argument (Max Gurtovoy)
    - remove unused exports (Minwoo Im)

 - Use-after-free fix for partition iteration (Ming)

 - Missing blk-mq debugfs flag annotation (John)

 - Bdev freeze regression fix (Satya)

 - blk-iocost NULL pointer deref fix (Tejun)

* tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits)
  bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET
  bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket
  bcache: check unsupported feature sets for bcache register
  bcache: fix typo from SUUP to SUPP in features.h
  bcache: set pdev_set_uuid before scond loop iteration
  blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
  block/rnbd-clt: avoid module unload race with close confirmation
  block/rnbd: Adding name to the Contributors List
  block/rnbd-clt: Fix sg table use after free
  block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close
  block/rnbd: Select SG_POOL for RNBD_CLIENT
  block: pre-initialize struct block_device in bdev_alloc_inode
  fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb
  nvme: remove the unused status argument from nvme_trace_bio_complete
  nvmet-rdma: Fix list_del corruption on queue establishment failure
  nvme: unexport functions with no external caller
  nvme: avoid possible double fetch in handling CQE
  nvme-tcp: Fix possible race of io_work and direct send
  nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
  nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings
  ...
2021-01-10 12:53:08 -08:00
Linus Torvalds
d430adfea8 io_uring-5.11-2021-01-10
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/7J/cQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpr2IEACmFmPGOHiRgo3ET6F+pXufVtqN/TiiOKIM
 GNznobO62HRL35ZTSVMH86u+koouWfoBCWtNMOq6ln2wMbNnHUKFgCdNhhX1vXPg
 T404WTVFtqw19wBigLUBnANDWAHOOVOdcbShNuznE/PYgC1faz9HFjuKY7GVnrzU
 xOSuw1k8P8swwf5h641fIwGI1sdyBgFHRsG8YwVBVJtmf4B8tRSQvAF1fesIPw6j
 ZQTcfAAFl29Kj1Tjlog/rD75CS6xVQRd59AaJqvF8khMAsp/VHb7snAPMZJ2EEO2
 6by5zNbh5mhqOhWFe7jvem+MBFGARx/Ol5cfKPehGsjLoOAk/QJU6tOYA5T1YHdY
 aOB5QR/c/H7uHdWBu6pcU9sT3b7LvOJGJF+kXHt/N2A8k03jXmmWk+LoxrRsXrbr
 Tvo7ehOIHdgnOuy2M9R9a/c0WtjY6mzBM9OEyFT3oa1ijM5mjAgU1YAVKJgjOa83
 eeN9p50+OcFH34bDU2bGCbDdnfZvplcgcpib1p2A5H0seoci2Tn//ihJ7us4+JTP
 5hZS1alkL/ngwr8LGoltS/RnJyJsP2ZJO8NzrRli66e6EflUXnJtla8zP4EASKmQ
 FnD5Yt2TFtBTt/MOAhUKG2whD5uvUtJIRLll33i6gfO97LSMZVkH43pji4XEAZkR
 idVotzElKw==
 =+yAt
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "A bit larger than I had hoped at this point, but it's all changes that
  will be directed towards stable anyway. In detail:

   - Fix a merge window regression on error return (Matthew)

   - Remove useless variable declaration/assignment (Ye Bin)

   - IOPOLL fixes (Pavel)

   - Exit and cancelation fixes (Pavel)

   - fasync lockdep complaint fix (Pavel)

   - Ensure SQPOLL is synchronized with creator life time (Pavel)"

* tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block:
  io_uring: stop SQPOLL submit on creator's death
  io_uring: add warn_once for io_uring_flush()
  io_uring: inline io_uring_attempt_task_drop()
  io_uring: io_rw_reissue lockdep annotations
  io_uring: synchronise ev_posted() with waitqueues
  io_uring: dont kill fasync under completion_lock
  io_uring: trigger eventfd for IOPOLL
  io_uring: Fix return value from alloc_fixed_file_ref_node
  io_uring: Delete useless variable ‘id’ in io_prep_async_work
  io_uring: cancel more aggressively in exit_work
  io_uring: drop file refs after task cancel
  io_uring: patch up IOPOLL overflow_flush sync
  io_uring: synchronise IOPOLL on task_submit fail
2021-01-10 12:39:38 -08:00
Linus Torvalds
28318f5350 USB fixes for 5.11-rc3
Here are a number of small USB driver fixes for 5.11-rc3.
 
 Include in here are:
 	- USB gadget driver fixes for reported issues
 	- new usb-serial driver ids
 	- dma from stack bugfixes
 	- typec bugfixes
 	- dwc3 bugfixes
 	- xhci driver bugfixes
 	- other small misc usb driver bugfixes
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX/sKZg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynVlgCgtLrjhpvxkW/TegCp3kuvsI7Kj0UAniYFwZG1
 1KKr2rrignh3vLMmkCAp
 =IR1N
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for 5.11-rc3.

  Include in here are:

   - USB gadget driver fixes for reported issues

   - new usb-serial driver ids

   - dma from stack bugfixes

   - typec bugfixes

   - dwc3 bugfixes

   - xhci driver bugfixes

   - other small misc usb driver bugfixes

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
  usb: dwc3: gadget: Clear wait flag on dequeue
  usb: typec: Send uevent for num_altmodes update
  usb: typec: Fix copy paste error for NVIDIA alt-mode description
  usb: gadget: enable super speed plus
  kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb
  usb: uas: Add PNY USB Portable SSD to unusual_uas
  usb: gadget: configfs: Preserve function ordering after bind failure
  usb: gadget: select CONFIG_CRC32
  usb: gadget: core: change the comment for usb_gadget_connect
  usb: gadget: configfs: Fix use-after-free issue with udc_name
  usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup
  usb: usbip: vhci_hcd: protect shift size
  USB: usblp: fix DMA to stack
  USB: serial: iuu_phoenix: fix DMA from stack
  USB: serial: option: add LongSung M5710 module support
  USB: serial: option: add Quectel EM160R-GL
  USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug
  usb: gadget: f_uac2: reset wMaxPacketSize
  usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression
  usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one
  ...
2021-01-10 12:33:19 -08:00
Linus Torvalds
4ad9a28f56 Staging driver fixes for 5.11-rc3
Here are some small staging driver fixes for 5.11-rc3.  Nothing major,
 just resolving some reported issues:
 	- cleanup some remaining mentions of the ION drivers that were
 	  removed in 5.11-rc1
 	- comedi driver bugfix
 	- 2 error path memory leak fixes
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX/sJ2w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynrXACZASkdHO71XqECukP73ajgRD81LbQAn3igZysN
 2gOnWLkJbYSoL1fDD3mx
 =Jeh8
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for 5.11-rc3. Nothing major,
  just resolving some reported issues:

   - cleanup some remaining mentions of the ION drivers that were
     removed in 5.11-rc1

   - comedi driver bugfix

   - two error path memory leak fixes

  All have been in linux-next for a while with no reported issues"

* tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ION: remove some references to CONFIG_ION
  staging: mt7621-dma: Fix a resource leak in an error handling path
  Staging: comedi: Return -EFAULT if copy_to_user() fails
  staging: spmi: hisi-spmi-controller: Fix some error handling paths
2021-01-10 12:28:07 -08:00
Linus Torvalds
e07cd2f3e7 Char/Misc driver fixes for 5.11-rc3
Here are some small char and misc driver fixes for 5.11-rc3.
 
 the majority here are fixes for the habanalabs drivers, but also in here
 are:
 	- crypto driver fix
 	- pvpanic driver fix
 	- updated font file
 	- interconnect driver fixes
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX/sJUw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym3/wCfYVaYBcHzr0CATzOXEbtpBlMpkkMAn1M/pOET
 6RuyBJCjONwT8g4BzOq1
 =jlAi
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.11-rc3.

  The majority here are fixes for the habanalabs drivers, but also in
  here are:

   - crypto driver fix

   - pvpanic driver fix

   - updated font file

   - interconnect driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
  Fonts: font_ter16x32: Update font with new upstream Terminus release
  misc: pvpanic: Check devm_ioport_map() for NULL
  speakup: Add github repository URL and bug tracker
  MAINTAINERS: Update Georgi's email address
  crypto: asym_tpm: correct zero out potential secrets
  habanalabs: Fix memleak in hl_device_reset
  interconnect: imx8mq: Use icc_sync_state
  interconnect: imx: Remove a useless test
  interconnect: imx: Add a missing of_node_put after of_device_is_available
  interconnect: qcom: fix rpmh link failures
  habanalabs: fix order of status check
  habanalabs: register to pci shutdown callback
  habanalabs: add validation cs counter, fix misplaced counters
  habanalabs/gaudi: retry loading TPC f/w on -EINTR
  habanalabs: adjust pci controller init to new firmware
  habanalabs: update comment in hl_boot_if.h
  habanalabs/gaudi: enhance reset message
  habanalabs: full FW hard reset support
  habanalabs/gaudi: disable CGM at HW initialization
  habanalabs: Revise comment to align with mirror list name
  ...
2021-01-10 12:24:33 -08:00