Commit graph

1,169,205 commits

Author SHA1 Message Date
Zhan Liu
f5041bc1fc drm/amd/display: Properly define DPCS related info for DCN301
[Why]
DPCS related info needs to be properly defined within code.

[How]
Add missing DPCS related info to code.

Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 16:03:52 -05:00
Eryk Brol
115a385c08 drm/amd/display: Do full modeset when DSC debugfs is changed
[Why]
Whenever DSC parameters are changed we need to perform full modeset to commit
DSC changes to DC.

[How]
If dsc_force_changed is set, need to set mode_changed on new CRTC state

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 16:03:46 -05:00
Jacky Liao
d0274aba24 drm/amd/display: Add DSCL memory low power support
[Why]
The DSCL memory blocks should be powered down when they're not in use.
This will reduce power consumption.

[How]
1. Write to DSCL_MEM_PWR_FORCE to put memory to shutdown when DSCL is not
   used.
2. Added a debug option to allow this behaviour to be turned off

Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 16:03:40 -05:00
Brandon Syu
99349a8aed drm/amd/display: Init clock value by current vbios CLKs
[Why]
While booting into OS, driver updates DPP/DISP CLKs.
But init clock value is zero which is invalid.

[How]
Get current clocks value to update init clocks.
To avoid underflow.

Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 16:03:33 -05:00
Joshua Aberback
079204508e drm/amd/display: Check link_active instead of lane_settings != unknown
[Why]
enable_link_dp_mst checks that cur_link_settings != unknown to determine
that the link is already enabled, to skip redundant enablement calls for
multiple streams on the same link. During dc_reinitialize_hardware,
cur_link_settings on previously-active links is not cleared, which blocks
MST links from being re-enabled after a reinitialization.

[How]
 - check for link_status->link_active instead, as it's the real intent
 - clear cur_link_settings when we clear link_active

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 16:03:27 -05:00
Sung Lee
901c1ec05e drm/amd/display: Update dram_clock_change_latency for DCN2.1
[WHY]
dram clock change latencies get updated using ddr4 latency table, but
does that update does not happen before validation. This value
should not be the default and should be number received from
df for better mode support.
This may cause a PState hang on high refresh panels with short vblanks
such as on 1080p 360hz or 300hz panels.

[HOW]
Update latency from 23.84 to 11.72.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 16:03:20 -05:00
Jacky Liao
00b0ac6781 drm/amd/display: Add HDR3DLUT and SHAPER memory shutdown support
[Why]
The HDR3DLUT and SHAPER memory blocks should be powered down when
they're not in use. This will reduce power consumption.

[How]
1. Write to HDR3DLUT_MEM_PWR_FORCE to put memory to shutdown
   when HDR3DLUT is not used.
2. Write to SHAPER_MEM_PWR_FORCE to put memory to shutdown
   when SHAPER is not used.

Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 16:03:14 -05:00
Eric Bernstein
bc1e089476 drm/amd/display: Revert update clk_mgr for vg
This reverts commit 2208f39c75.
It caused a regression in internal FPGA tests.

Signed-off-by: Eric Bernstein <Eric.Bernstein@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 16:00:23 -05:00
Marek Olšák
0c056b14d8 drm/amdgpu: set LDS_CONFIG=0x20 on VanGogh to fix MGCG hang
Same as Sienna Cichlid and Navy Flounder.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 16:00:14 -05:00
Aurabindo Pillai
3c4d55c9b9 drm/amd/display: turn DPMS off on connector unplug
[Why&How]

Set dpms off on the connector that was unplugged, for the side effect of
releasing some references held through deallocation of MST payload. This is
the expected behaviour for non MST devices as well.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 16:00:06 -05:00
Aurabindo Pillai
3f16ae8256 drm/amd/display: Clear dc remote sinks on MST disconnect
[Why&How]
Recent changes to upstream mst code remove the callback which
cleared the internal state for mst. Move the missing functionality
that was previously called through the destroy call back for mst connector
destroy

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 15:59:57 -05:00
Arunpravin
22dd89828a drm/amdgpu/pm/smu11: Fix fan set speed bug
Fix fan set speed calculation.

Suggested-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 15:59:15 -05:00
Jinzhou Su
79c77ac603 drm/amdgpu: Set doorbell range for gfx ring
If there are 2 gfx rings, the doorbell lower range of second ring
will override the first ring.

Signed-off-by: Jinzhou.Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 15:59:09 -05:00
Tao Zhou
3591ecd630 drm/amdgpu: update GC golden setting for dimgrey_cavefish
Update GC golden setting for dimgrey_cavefish.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 15:59:02 -05:00
Jingwen Chen
7cf7a392af drm/amdgpu: skip power profile switch in sriov
power profile switch in vcn need to send SetWorkLoad msg to
smu, which is not supported in sriov.

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Jiange Zhao <Jiange.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 15:58:54 -05:00
Jiansong Chen
d503d8b81d drm/amd/pm: update driver if version for navy_flounder
It's in accordance with pmfw 65.18.0 for navy_flounder.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 15:58:46 -05:00
James Zhu
91a7f88781 drm/amdgpu/vcn3.0: fix compilation warning
Fixed warning: no previous prototype.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 15:58:39 -05:00
Likun Gao
8c8244ca4e drm/amdgpu: increase reserved VRAM size to 8MB
4MB reserved VRAM size which used for page tables was not enough for
some condition, increase it to 8MB to reduce page table contention.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 15:58:30 -05:00
Stanley.Yang
055e94a867 drm/amdgpu: only skip smc sdma sos ta and asd fw in SRIOV for navi12
The KFDTopologyTest.BasicTest will failed if skip smc, sdma, sos, ta
and asd fw in SRIOV for vega10, so adjust above fw and skip load them
in SRIOV only for navi12.

v2: remove unnecessary asic type check.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 15:58:16 -05:00
Stanley.Yang
9ccde05c0a drm/amdgpu: set default value of noretry to 1 for specified asic
noretry = 0 casue KFDGraphicsInterop test failed
on SRIOV platform for vega10, so set noretry to 1
for vega10.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01 15:58:00 -05:00
Mike Snitzer
857c4c0a8b dm writecache: remove BUG() and fail gracefully instead
Building on arch/s390/ results in this build error:

cc1: some warnings being treated as errors
../drivers/md/dm-writecache.c: In function 'persistent_memory_claim':
../drivers/md/dm-writecache.c:323:1: error: no return statement in function returning non-void [-Werror=return-type]

Fix this by replacing the BUG() with an -EOPNOTSUPP return.

Fixes: 48debafe4f ("dm: add writecache target")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-12-01 15:43:39 -05:00
Thomas Gleixner
e7b624183d dm table: Remove BUG_ON(in_interrupt())
The BUG_ON(in_interrupt()) in dm_table_event() is a historic leftover from
a rework of the dm table code which changed the calling context.

Issuing a BUG for a wrong calling context is frowned upon and
in_interrupt() is deprecated and only covering parts of the wrong
contexts. The sanity check for the context is covered by
CONFIG_DEBUG_ATOMIC_SLEEP and other debug facilities already.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-12-01 15:43:38 -05:00
Sergei Shtepa
8947833571 dm: fix bug with RCU locking in dm_blk_report_zones
The dm_get_live_table() function makes RCU read lock so
dm_put_live_table() must be called even if dm_table map is not found.

Fixes: e76239a374 ("block: add a report_zones method")
Cc: stable@vger.kernel.org
Signed-off-by: Sergei Shtepa <sergei.shtepa@veeam.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-12-01 15:43:37 -05:00
Nick Desaulniers
35d2835d2a Revert "dm cache: fix arm link errors with inline"
This reverts commit 43aeaa2957.

Since commit 0bddd227f3 ("Documentation: update for gcc 4.9 requirement")
the minimum supported version of GCC is gcc-4.9. It's now safe to remove
this code.

Link: https://github.com/ClangBuiltLinux/linux/issues/427
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-12-01 15:43:36 -05:00
Dominique Martinet
960f4f8a4e fs: 9p: add generic splice_write file operation
The default splice operations got removed recently, add it back to 9p
with iter_file_splice_write like many other filesystems do.

Link: http://lkml.kernel.org/r/1606837496-21717-1-git-send-email-asmadeus@codewreck.org
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-12-01 21:40:47 +01:00
Alexandre Belloni
32b7cfbd4b ARM: dts: at91: remove deprecated ADC properties
atmel,adc-res, atmel,adc-res-names and the trigger nodes are not parsed by
the driver anymore and the information is now defined in the driver data.

Also remove the leftover #address-cells and #size-cells that were used when
the trigger nodes had a unit-address.

Finally, the default is already to use the highest resoution. Remove
atmel,adc-use-res from the SoC dtsi.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-11-alexandre.belloni@bootlin.com
2020-12-01 21:11:26 +01:00
Alexandre Belloni
851a95da58 ARM: dts: at91: at91sam9rl: fix ADC triggers
The triggers for the ADC were taken from at91sam9260 dtsi but are not
correct.

Fixes: a4c1d6c758 ("ARM: at91/dt: sam9rl: add lcd, adc, usb gadget and pwm support")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-10-alexandre.belloni@bootlin.com
2020-12-01 21:11:26 +01:00
Alexandre Belloni
53de2d1274 ARM: dts: at91: sama5d3: use proper ADC compatible
The ADC is different from the at91sam9x5 ADC. Not only it doesn't have the
same resolution but it even has only one and the LOWRES bit doesn't exist.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-9-alexandre.belloni@bootlin.com
2020-12-01 21:11:10 +01:00
Linus Torvalds
f43691b59f vhost,vdpa: fixes
A couple of minor fixes.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl+/8moPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpgTIH/0jXnA2xTDvth1JGiL8fzdnBVFI4mIbRg2c6
 vXkLgSGnOHgeXsnN/yEpPSREpjjQEJ73UhmVpF27YxgEoV10CliD8reXXLgYeG1t
 Kgx9O/9LT8HHaqcrKid78rccjKqoZbqI5xgeEAMc1Y2H2uLudz/8nAwFUt46v6Gm
 FTI7W+UfuCigudpfW5gXAU/hbSa3ieY1yaSk5DwPM1V/MEu7lMbhhjwcEASyxgLV
 IBK1fkZiMx2RdJLnV+DYQ/ZfT7eSModbuTcl3f+vlObLvtuqa/fbde8JxkhJJ9xd
 lgrlBPpqC/7ns+BbFCzwS6jXJcsGMntK9aM6svtN5QotHs7S0kI=
 =IOVt
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull vhost fixes from Michael Tsirkin:
 "A couple of minor fixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost-vdpa: fix page pinning leakage in error path (rework)
  vringh: fix vringh_iov_push_*() documentation
  vhost scsi: fix lun reset completion handling
2020-12-01 12:11:09 -08:00
Vasile-Laurentiu Stanimir
26fecbf760 pstore: Move kmsg_bytes default into Kconfig
While kmsg_bytes can be set for pstore via mount, if a crash occurs
before the mount only partial console log will be stored as kmsg_bytes
defaults to a potentially different hardcoded value in the kernel
(PSTORE_DEFAULT_KMSG_BYTES). This makes it impossible to analyze valuable
post-mortem data especially on the embedded development or in the process
of bringing up new boards. Change this value to be a Kconfig option
with the default of old PSTORE_DEFAULT_KMSG_BYTES

Signed-off-by: Vasile-Laurentiu Stanimir <vasile-laurentiu.stanimir@windriver.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-12-01 12:09:17 -08:00
Alexandre Belloni
8caaf0610f ARM: dts: at91: kizbox: switch to new pwm-atmel-tcb binding
Switch to the new pwm-atmel-tcb binding that avoid wasting TCB channels.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Antoine Aubert <a.aubert@overkiz.com>
Link: https://lore.kernel.org/r/20201030183658.1007395-5-alexandre.belloni@bootlin.com
2020-12-01 21:07:38 +01:00
Christoph Hellwig
b6f8ed33ab pstore/blk: remove {un,}register_pstore_blk
This interface is entirely unused, so remove them and various bits of
unreachable code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201016132047.3068029-4-hch@lst.de
2020-12-01 12:01:03 -08:00
Uma Shankar
998cc86495 drm/i915/lspcon: Do not send DRM infoframes to non-HDMI sinks
Non-HDMI sinks shouldn't be sent Dynamic Range and Mastering infoframes.
Check for that when using LSPCON.

v2: Addressed Ville's review comment.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-15-uma.shankar@intel.com
2020-12-02 01:29:52 +05:30
Uma Shankar
b759415020 drm/i915/display: Implement DRM infoframe read for LSPCON
Implement Read back of HDR metadata infoframes i.e Dynamic Range
and Mastering Infoframe for LSPCON devices.

v2: Added proper bitmask of enabled infoframes as per Ville's
recommendation.

v3: Dropped a redundant wrapper as per Ville's comment.

v4: Dropped a redundant print, added Ville's RB.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-14-uma.shankar@intel.com
2020-12-02 01:29:52 +05:30
Uma Shankar
34108a03e4 drm/i915/display: Implement infoframes readback for LSPCON
Implemented Infoframes enabled readback for LSPCON devices.
This will help align the implementation with state readback
infrastructure.

v2: Added proper bitmask of enabled infoframes as per Ville's
recommendation.

v3: Added pcon specific infoframe types instead of using the HSW
one's, as recommended by Ville.

v4: Addressed Ville's review comment by adding HDMI infoframe
versions directly instead of DIP wrappers.

v5: Re-ordered the patches to avoid potential break in usage,
as suggested by Ville.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-13-uma.shankar@intel.com
2020-12-02 01:29:52 +05:30
Uma Shankar
a44289b923 drm/i915/lspcon: Create separate infoframe_enabled helper
Lspcon has Infoframes as well as DIP for HDR metadata(DRM Infoframe).
Create a separate mechanism for lspcon compared to HDMI in order to
address the same and ensure future scalability.

v2: Streamlined this as per Ville's suggestions, making sure that
HDMI infoframe versions are directly returned instead of a redundant
and confusing DIP overhead.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-12-uma.shankar@intel.com
2020-12-02 01:29:52 +05:30
Uma Shankar
c5044aee40 drm/i915/display: Enable HDR for Parade based lspcon
Enable HDR for LSPCON based on Parade along with MCA.

v2: Added a helper for status reg as suggested by Ville.

v3: Removed a redundant variable, added Ville's RB.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vipin Anand <vipin.anand@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-11-uma.shankar@intel.com
2020-12-02 01:29:52 +05:30
Uma Shankar
84ab44b757 drm/i915/display: Nuke bogus lspcon check
Dropped a irrelevant lspcon check from intel_hdmi_add_properties
function.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-10-uma.shankar@intel.com
2020-12-02 01:29:52 +05:30
Uma Shankar
5d36f2b2dd drm/i915/display: Enable colorspace programming for LSPCON devices
Enable HDMI Colorspace for LSPCON based devices. Sending Colorimetry
data for HDR using AVI infoframe. LSPCON firmware expects this and though
SOC drives DP, for HDMI panel AVI infoframe is sent to the LSPCON device
which transfers the same to HDMI sink.

v2: Dropped state managed in drm core as per Jani Nikula's suggestion.

v3: Aligned colorimetry handling for lspcon as per compute_avi_infoframes,
as suggested by Ville.

v4: Finally fixed this with Ville's help, re-phrased the commit header
and description.

v5: Register HDMI colorspace for lspcon and move this to
intel_dp_add_properties as we can't create property at late_register.

Credits-to: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-9-uma.shankar@intel.com
2020-12-02 01:29:52 +05:30
Ville Syrjälä
174da987bc drm/i915: Split intel_attach_colorspace_property() into HDMI vs. DP variants
With LSPCON we use the AVI infoframe to convey the colorimetry
information (as opposed to DP MSA/SDP), so the property we expose
should match the values we can stuff into the infoframe. Ie. we
must use the HDMI variant of the property, even though we drive
LSPCON in PCON mode. To that end just split
intel_attach_colorspace_property() into HDMI and DP variants
and let the caller worry about which one it wants to use.

Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-8-uma.shankar@intel.com
2020-12-02 01:29:31 +05:30
Uma Shankar
b983675709 drm/i915/display: Attach content type property for LSPCON
Content type is supported on HDMI sink devices. Attached the
property for the same for LSPCON based devices.

v2: Added the content type programming when we are attaching
the property to connector, as suggested by Ville.

v3: Need to attach content type on intel_dp_add_properties
as creating of new properties is not possible at late_register.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-7-uma.shankar@intel.com
2020-12-02 01:22:31 +05:30
Uma Shankar
55b1f9ddf4 drm/i915/display: Add a WARN for invalid output range and format
Add a WARN to rule out an invalid output range and format
combination. This is to align the lspcon code with
compute_avi_infoframes.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-6-uma.shankar@intel.com
2020-12-02 01:22:31 +05:30
Uma Shankar
9559c0d13b drm/i915/display: Fixes quantization range for YCbCr output
This patch fixes the quantization range for YCbCr output on
Lspcon based devices.

v2: Re-phrased the description and added Ville's Rb.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-5-uma.shankar@intel.com
2020-12-02 01:22:30 +05:30
Uma Shankar
2e666613b2 drm/i915/display: Attach HDR property for capable Gen9 devices
Attach HDR property for Gen9 devices with MCA LSPCON
chips.

v2: Cleaned HDR property attachment logic based on capability
as per Jani Nikula's suggestion.

v3: Fixed the HDR property attachment logic as per the new changes
by Kai-Feng to align with lspcon detection failure on some devices.

v4: Add HDR proprty in late_register to handle lspcon detection,
as suggested by Ville.

v5: Init Lspcon only if advertized from BIOS.

v6: Added a Todo to plan a cleanup later, added Ville's RB.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-4-uma.shankar@intel.com
2020-12-02 01:22:29 +05:30
Uma Shankar
1a911350dd drm/i915/display: Enable HDR on gen9 devices with MCA Lspcon
Gen9 hardware supports HDMI2.0 through LSPCON chips.
Extending HDR support for MCA LSPCON based GEN9 devices.

SOC will drive LSPCON as DP and send HDR metadata as standard
DP SDP packets. LSPCON will be set to operate in PCON mode,
will receive the metadata and create Dynamic Range and
Mastering Infoframe (DRM packets) and send it to HDR capable
HDMI sink devices.

v2: Re-used hsw infoframe write implementation for HDR metadata
for LSPCON as per Ville's suggestion.

v3: Addressed Jani Nikula's review comments.

v4: Addressed Ville's review comments, removed redundant wrapper
and checks, passed arguments instead of hardcodings.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-3-uma.shankar@intel.com
2020-12-02 01:22:28 +05:30
Uma Shankar
81cc320aa3 drm/i915/display: Add HDR Capability detection for LSPCON
LSPCON firmware exposes HDR capability through LPCON_CAPABILITIES
DPCD register. LSPCON implementations capable of supporting
HDR set HDR_CAPABILITY bit in LSPCON_CAPABILITIES to 1. This patch
reads the same, detects the HDR capability and adds this to
intel_lspcon struct.

v2: Addressed Jani Nikula's review comment and fixed the HDR
    capability detection logic

v3: Deferred HDR detection from lspcon_init (Ville)

v4: Addressed Ville's minor review comments, added his RB.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-2-uma.shankar@intel.com
2020-12-02 01:22:27 +05:30
Randy Dunlap
14483cbf04 net: broadcom CNIC: requires MMU
The CNIC kconfig symbol selects UIO and UIO depends on MMU.
Since 'select' does not follow dependency chains, add the same MMU
dependency to CNIC.

Quietens this kconfig warning:

WARNING: unmet direct dependencies detected for UIO
  Depends on [n]: MMU [=n]
  Selected by [m]:
  - CNIC [=m] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n)

Fixes: adfc5217e9 ("broadcom: Move the Broadcom drivers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Rasesh Mody <rmody@marvell.com>
Cc: GR-Linux-NIC-Dev@marvell.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20201129070843.3859-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01 11:44:02 -08:00
Lukas Bulwahn
9e39394fae net/ipv6: propagate user pointer annotation
For IPV6_2292PKTOPTIONS, do_ipv6_getsockopt() stores the user pointer
optval in the msg_control field of the msghdr.

Hence, sparse rightfully warns at ./net/ipv6/ipv6_sockglue.c:1151:33:

  warning: incorrect type in assignment (different address spaces)
      expected void *msg_control
      got char [noderef] __user *optval

Since commit 1f466e1f15 ("net: cleanly handle kernel vs user buffers for
->msg_control"), user pointers shall be stored in the msg_control_user
field, and kernel pointers in the msg_control field. This allows to
propagate __user annotations nicely through this struct.

Store optval in msg_control_user to properly record and propagate the
memory space annotation of this pointer.

Note that msg_control_is_user is set to true, so the key invariant, i.e.,
use msg_control_user if and only if msg_control_is_user is true, holds.

The msghdr is further used in the six alternative put_cmsg() calls, with
msg_control_is_user being true, put_cmsg() picks msg_control_user
preserving the __user annotation and passes that properly to
copy_to_user().

No functional change. No change in object code.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20201127093421.21673-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01 11:42:33 -08:00
Javier González
2f4c9ba23b nvme: export zoned namespaces without Zone Append support read-only
Allow ZNS NVMe SSDs to present a read-only namespace when append is not
supported, instead of rejecting the namespace directly.

This allows (i) the namespace to be used in read-only mode, which is not
a problem as the append command only affects the write path, and (ii) to
use standard management tools such as nvme-cli to choose a different
format or firmware slot that is compatible with the Linux zoned block
device.

Signed-off-by: Javier González <javier.gonz@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01 20:36:38 +01:00
Javier González
ba4fb32056 nvme: rename bdev operations
Remane block device operations in preparation to add char device file
operations.

Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01 20:36:38 +01:00