The UVD firmware is copied to cpu addr in uvd_resume, so it
should be used after that. This is to fix a bug introduced by
patch drm/amdgpu: fix SI UVD firmware validate resume fail.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
The SI UVD firmware validate key is stored at the end of firmware,
which is changed during resume while playing video. So get the key
at sw_init and store it for fw validate using.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
fix the null pointer issue when runtime pm is triggered.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The mxs-dma driver is only used by DT platforms and the .id_table
is unused.
Get rid of it to simplify the code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201123193051.17285-1-festevam@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201124143405.2764-1-festevam@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Move the register slow register write and readback from out of the
critical path for execlists submission and delay it until the following
worker, shaving off around 200us. Note that the same signal_irq_work() is
allowed to run concurrently on each CPU (but it will only be queued once,
once running though it can be requeued and reexecuted) so we have to
remember to lock the global interactions as we cannot rely on the
signal_irq_work() itself providing the serialisation (in constrast to a
tasklet).
By pushing the arm/disarm into the central signaling worker we can close
the race for disarming the interrupt (and dropping its associated
GT wakeref) on parking the engine. If we loose the race, that GT wakeref
may be held indefinitely, preventing the machine from sleeping while
the GPU is ostensibly idle.
v2: Move the self-arming parking of the signal_irq_work to a flush of
the irq-work from intel_breadcrumbs_park().
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2271
Fixes: e23005604b ("drm/i915/gt: Hold context/request reference while breadcrumbs are active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123113717.20500-1-chris@chris-wilson.co.uk
(cherry picked from commit 9d5612ca16)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
After having written the entire OA buffer with reports, the HW will
write again at the beginning of the OA buffer. It'll indicate it by
setting the WRAP bits in the OASTATUS register.
When a wrap happens and that at the end of the read vfunc we write the
OASTATUS register back to clear the REPORT_LOST bit, we sometimes see
that the OATAILPTR register is reset to a previous position on Gen8/9
(apparently not the case on Gen11+). This leads the next call to the
read vfunc to process reports we've already read. Because we've marked
those as read by clearing the reason & timestamp dwords, they're
discarded and a "Skipping spurious, invalid OA report" message is
emitted.
The workaround to avoid this OATAILPTR value reset seems to be to set
the wrap bits when writing back OASTATUS.
This change has no impact on userspace, it only avoids a bunch of
DRM_NOTE("Skipping spurious, invalid OA report\n") messages.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 19f81df285 ("drm/i915/perf: Add OA unit support for Gen 8+")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117130124.829979-1-lionel.g.landwerlin@intel.com
(cherry picked from commit 059a0beb48)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The struct name smu_state_memroy_block contains a spelling mistake, rename
it to smu_state_memory_block
Fixes: 8554e67d6e ("drm/amd/powerplay: implement power_dpm_state sys interface for SMU11")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:382:23: warning: ‘ecc_umc_mcumc_status_addrs’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:720: warning: Function parameter or member 'vmhub' not described in 'gmc_v9_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:836: warning: Function parameter or member 'flush_type' not described in 'gmc_v9_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:836: warning: Function parameter or member 'all_hub' not described in 'gmc_v9_0_flush_gpu_tlb_pasid'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:382:23: warning: ‘ecc_umc_mcumc_status_addrs’ defined but not used [-Wunused-const-variable=]
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:618: warning: Function parameter or member 'flush_type' not described in 'gmc_v8_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:618: warning: Function parameter or member 'all_hub' not described in 'gmc_v8_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:657: warning: Function parameter or member 'vmhub' not described in 'gmc_v8_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:657: warning: Function parameter or member 'flush_type' not described in 'gmc_v8_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:998: warning: Function parameter or member 'pasid' not described in 'gmc_v8_0_vm_decode_fault'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:433: warning: Function parameter or member 'flush_type' not described in 'gmc_v7_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:433: warning: Function parameter or member 'all_hub' not described in 'gmc_v7_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:471: warning: Function parameter or member 'vmhub' not described in 'gmc_v7_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:471: warning: Function parameter or member 'flush_type' not described in 'gmc_v7_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:771: warning: Function parameter or member 'pasid' not described in 'gmc_v7_0_vm_decode_fault'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:448: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:448: warning: Excess function parameter 'fence' description in 'uvd_v4_2_ring_emit_fence'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:282: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:282: warning: Excess function parameter 'fence' description in 'cik_sdma_ring_emit_fence'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/navi12_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=]
151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } },
| ^~~~~~~~~
NB: Snipped a few of these
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/navi14_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=]
151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } },
| ^~~~~~~~~
NB: Snipped a few of these
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:227:29: warning: ‘DBGU_IO_BASE’ defined but not used [-Wunused-const-variable=]
227 | static const struct IP_BASE DBGU_IO_BASE ={ { { { 0x000001E0, 0x000125A0, 0x0040B400, 0, 0, 0 } },
| ^~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:127:29: warning: ‘PCIE0_BASE’ defined but not used [-Wunused-const-variable=]
127 | static const struct IP_BASE PCIE0_BASE ={ { { { 0x000128C0, 0x00411800, 0x04440000, 0, 0, 0 } },
| ^~~~~~~~~~
In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x000120A0, 0x00017400, 0x00401400, 0, 0, 0 } },
| ^~~~~~~~~
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In file included from drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:154:29: warning: ‘XDMA_BASE’ defined but not used [-Wunused-const-variable=
154 | static const struct IP_BASE XDMA_BASE ={ { { { 0x00003400, 0, 0, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x00017400, 0, 0, 0, 0, 0 } },
| ^~~~~~~~~
Fixes the following W=1 kernel build warning(s):
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:192: warning: Function parameter or member 'async' not described in 'dce_v6_0_page_flip'
drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:1050: warning: Cannot understand *
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:91: warning: Function parameter or member 'job' not described in 'uvd_v3_1_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:91: warning: Function parameter or member 'flags' not described in 'uvd_v3_1_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'addr' not described in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'seq' not described in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'flags' not described in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Excess function parameter 'fence' description in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:625: warning: Function parameter or member 'handle' not described in 'uvd_v3_1_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:625: warning: Excess function parameter 'adev' description in 'uvd_v3_1_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:692: warning: Function parameter or member 'handle' not described in 'uvd_v3_1_hw_fini'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:692: warning: Excess function parameter 'adev' description in 'uvd_v3_1_hw_fini'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sonny Jiang <sonny.jiang@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c:1903: warning: Function parameter or member 'timeout' not described in 'gfx_v6_0_ring_test_ib'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'addr' not described in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'seq' not described in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'flags' not described in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Excess function parameter 'fence' description in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:252: warning: Function parameter or member 'timeout' not described in 'si_dma_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/si_dma.c:408: warning: Function parameter or member 'ring' not described in 'si_dma_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Function parameter or member 'vmid' not described in 'si_dma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Function parameter or member 'pd_addr' not described in 'si_dma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Excess function parameter 'vm' description in 'si_dma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Function parameter or member 'ib' not described in 'si_dma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Function parameter or member 'tmz' not described in 'si_dma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Excess function parameter 'ring' description in 'si_dma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:804: warning: Function parameter or member 'ib' not described in 'si_dma_emit_fill_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:804: warning: Excess function parameter 'ring' description in 'si_dma_emit_fill_buffer'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1590: warning: Function parameter or member 'instance' not described in 'gfx_v7_0_select_se_sh'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1788: warning: Excess function parameter 'se_num' description in 'gfx_v7_0_setup_rb'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1788: warning: Excess function parameter 'sh_per_se' description in 'gfx_v7_0_setup_rb'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1852: warning: Excess function parameter 'adev' description in 'DEFAULT_SH_MEM_BASES'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2086: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_test_ring'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_hdp_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_hdp_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Excess function parameter 'ridx' description in 'gfx_v7_0_ring_emit_hdp_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'addr' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'seq' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Excess function parameter 'fence' description in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'addr' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'seq' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Excess function parameter 'fence' description in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2260: warning: Function parameter or member 'job' not described in 'gfx_v7_0_ring_emit_ib_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2260: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_ib_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2351: warning: Function parameter or member 'timeout' not described in 'gfx_v7_0_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'vmid' not described in 'gfx_v7_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'pd_addr' not described in 'gfx_v7_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_vm_flush'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:226: warning: Function parameter or member 'job' not described in 'cik_sdma_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:226: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'addr' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'seq' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Excess function parameter 'fence' description in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:663: warning: Function parameter or member 'timeout' not described in 'cik_sdma_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:808: warning: Function parameter or member 'ring' not described in 'cik_sdma_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Function parameter or member 'vmid' not described in 'cik_sdma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Function parameter or member 'pd_addr' not described in 'cik_sdma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Excess function parameter 'vm' description in 'cik_sdma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Function parameter or member 'ib' not described in 'cik_sdma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Function parameter or member 'tmz' not described in 'cik_sdma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Excess function parameter 'ring' description in 'cik_sdma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1339: warning: Function parameter or member 'ib' not described in 'cik_sdma_emit_fill_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1339: warning: Excess function parameter 'ring' description in 'cik_sdma_emit_fill_buffer'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/dce_v8_0.c:185: warning: Function parameter or member 'async' not described in 'dce_v8_0_page_flip'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:157: warning: Function parameter or member 'handle' not described in 'uvd_v4_2_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:157: warning: Excess function parameter 'adev' description in 'uvd_v4_2_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:212: warning: Function parameter or member 'handle' not described in 'uvd_v4_2_hw_fini'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:212: warning: Excess function parameter 'adev' description in 'uvd_v4_2_hw_fini'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'addr' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'seq' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Excess function parameter 'fence' description in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:513: warning: Function parameter or member 'job' not described in 'uvd_v4_2_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:513: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_ib'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:115: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_request_full_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:115: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_request_full_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:138: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_release_full_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:138: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_release_full_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:159: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_reset_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:159: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_reset_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:194: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_wait_reset'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:194: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_wait_reset'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:210: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_alloc_mm_table'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:210: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_alloc_mm_table'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:239: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_free_mm_table'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:239: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_free_mm_table'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/cik_ih.c:189: warning: Function parameter or member 'ih' not described in 'cik_ih_get_wptr'
drivers/gpu/drm/amd/amdgpu/cik_ih.c:274: warning: Function parameter or member 'ih' not described in 'cik_ih_set_rptr'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Qinglang Miao <miaoqinglang@huawei.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c:127: warning: Function parameter or member 'job' not described in 'amdgpu_ib_schedule'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c:1214: warning: Function parameter or member 'page_flags' not described in 'amdgpu_ttm_tt_create'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Jerome Glisse <glisse@freedesktop.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/radeon/radeon_device.c:637:6: warning: no previous prototype for ‘radeon_device_is_virtual’ [-Wmissing-prototypes]
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setting any rotation on the cursor plane is ignored by amdgpu.
Because of DCE/DCN design, it's not possible to rotate the cursor.
Instead of displaying the wrong result, stop advertising the rotation
property for the cursor plane.
Now that we check all cursor plane properties in amdgpu_dm_atomic_check,
remove the TODO.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't allow user-space to set different scaling parameters for the
cursor plane and for the primary plane. Because of DCE/DCN design,
it's not possible to have a mismatch.
The old check in dm_update_plane_state is superseded by this new
check.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looking at handle_cursor_update, it doesn't seem like src_{x,y,w,h}
are picked up by DC. I also tried to change these parameters via a
test KMS client, and amdgpu ignored them. Instead of displaying the
wrong result, reject the atomic commit.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch expands the cursor checks added in "drm/amd/display: add basic
atomic check for cursor plane" to also include a FB size check. Without
this patch, setting a FB smaller than max_cursor_size with an invalid
width would result in amdgpu error messages and a fallback to a 64-byte
width:
[drm:hubp1_cursor_set_attributes [amdgpu]] *ERROR* Invalid cursor pitch of 100. Only 64/128/256 is supported on DCN.
Note that DC uses the word "pitch" when actually checking the FB width.
Indeed, the function handle_cursor_update does this:
attributes.pitch = attributes.width;
In my tests, the cursor FB actually had a pitch of 512 bytes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reported-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This function actually control the vblank on/off.
It shouldn't be bypassed for VF. Otherwise all the
vblank based feature on VF will not work.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cached backlight is never being updated since panel_cntl specific
registers were moved from abm to panel_cntl.
[How]
Update cached backlight in set_abm_immediate_disable as what we used to
do. Also, update the priority of backlight restore mechanism so that
cached backlight has the highest priority since it is always correct.
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
ASIC requirement.
[how]
Make disable_*_power_gate to false.
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The GAMCOR memory blocks should be powered down when they're not in use.
This will reduce power consumption.
[How]
Write to GAMCOR_MEM_PWR_FORCE to put memory to shutdown
when GAMCOR is not used.
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Remove temp macro since the enum is in header file already.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
only apply multiple display power optimization in case there are more
than one internal display.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>