Commit graph

1,169,205 commits

Author SHA1 Message Date
Tvrtko Ursulin
016669752c drm/i915/guc: Use correct lock for accessing guc->mmio_msg
Guc->mmio_msg is set under the guc->irq_lock in guc_get_mmio_msg so it
should be consumed under the same lock from guc_handle_mmio_msg.

I am not sure if the overall flow here makes complete sense but at least
the correct lock is now used.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120095636.1987395-1-tvrtko.ursulin@linux.intel.com
2020-11-24 09:10:37 +00:00
David Lechner
eaf7697b6f ARM: omap2plus_defconfig: Enable TI eQEP counter driver
This enables the TI eQEP counter driver that is used by BeagleBone Blue.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-24 11:04:12 +02:00
Yangtao Li
a1158e36f8 pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler
It is found on many allwinner soc that there is a low probability that
the interrupt status cannot be read in sunxi_pinctrl_irq_handler. This
will cause the interrupt status of a gpio bank to always be active on
gic, preventing gic from responding to other spi interrupts correctly.

So we should call the chained_irq_* each time enter sunxi_pinctrl_irq_handler().

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/85263ce8b058e80cea25c6ad6383eb256ce96cc8.1604988979.git.frank@allwinnertech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-24 09:41:29 +01:00
Yangtao Li
fd5198dde3 pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON
The interrupt descriptor cannot be found in the interrupt processing
function, and this situation cannot happen when the system is running
normally. It doesn't seem right to return directly to the status of not
handling gic. In this case, it must be a bug, let's mark it with
WARN_ON.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Link: https://lore.kernel.org/r/470ebae22fc5434ad5409c4f6e29255467b3cef6.1604988979.git.frank@allwinnertech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-24 09:40:54 +01:00
Yangtao Li
6de7ed693c pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller
A100's pin starts with PB, so it should start with 1.

Fixes: 473436e764 ("pinctrl: sunxi: add support for the Allwinner A100 pin controller")
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Link: https://lore.kernel.org/r/9db51667bf9065be55beafd56e5c319e3bbe8310.1604988979.git.frank@allwinnertech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-24 09:40:03 +01:00
Pierre-Louis Bossart
b7cab9be7c soundwire: SDCA: detect sdca_cascade interrupt
The SoundWire 1.2 specification defines an "SDCA cascade" bit which
handles a logical OR of all SDCA interrupt sources (up to 30 defined).

Due to limitations of the addressing space, this bit is located in the
SDW_DP0_INT register when DP0 is used, or alternatively in the
DP0_SDCA_Support_INTSTAT register when DP0 is not used.

To allow for both cases to be handled, this bit will be checked in the
main device-level interrupt handling code. This will result in the
register being read twice if DP0 is enabled, but it's not clear how to
optimize this case. It's also more logical to deal with this interrupt
at the device than the port level, this bit is really not DP0 specific
and its location in the DP0_INTSTAT bit is only due to the lack of
free space in SCP_INTSTAT_1.

The SDCA_Cascade bit cannot be masked or cleared, so the interrupt
handling only forwards the detection to the Slave driver, which will
deal with reading the relevant SDCA status bits and clearing them. The
bus driver only signals the detection.

The communication with the Slave driver is based on the same interrupt
callback, with only an extension to provide the status of the
sdca_cascade bit.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201104152358.9518-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-24 14:09:31 +05:30
Srinivas Kandagatla
e6db818a3f soundwire: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute
running kernel with CONFIG_DEBUG_LOCKS_ALLOC enabled will below warning:

BUG: key ffff502e09807098 has not been registered!
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 5 PID: 129 at kernel/locking/lockdep.c:4623
	lockdep_init_map_waits+0xe8/0x250
Modules linked in:
CPU: 5 PID: 129 Comm: kworker/5:1 Tainted: G
       W         5.10.0-rc1-00277-ged49f224ca3f-dirty #1210
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Workqueue: events deferred_probe_work_func
pstate: 80c00005 (Nzcv daif +PAN +UAO -TCO BTYPE=--)
pc : lockdep_init_map_waits+0xe8/0x250
lr : lockdep_init_map_waits+0xe8/0x250
 [ Trimmed ]

Call trace:
 lockdep_init_map_waits+0xe8/0x250
 __kernfs_create_file+0x78/0x180
 sysfs_add_file_mode_ns+0x94/0x1c8
 internal_create_group+0x110/0x3e0
 sysfs_create_group+0x18/0x28
 devm_device_add_group+0x4c/0xb0
 add_all_attributes+0x438/0x490
 sdw_slave_sysfs_dpn_init+0x128/0x138
 sdw_slave_sysfs_init+0x80/0xa0
 sdw_drv_probe+0x94/0x170
 really_probe+0x118/0x3e0
 driver_probe_device+0x5c/0xc0

 [ Trimmed ]

CPU: 5 PID: 129 Comm: kworker/5:1 Tainted: G
     W         5.10.0-rc1-00277-ged49f224ca3f-dirty #1210
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Workqueue: events deferred_probe_work_func
Call trace:
 dump_backtrace+0x0/0x1c0
 show_stack+0x18/0x68
 dump_stack+0xd8/0x134
 __warn+0xa0/0x158
 report_bug+0xc8/0x178
 bug_handler+0x20/0x78
 brk_handler+0x70/0xc8

[ Trimmed ]

Fix this by initializing dynamically allocated sysfs attribute to keep lockdep happy!

Fixes: bcac590299 ("soundwire: add Slave sysfs support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201104112941.1134-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-24 14:08:51 +05:30
Rajendra Nayak
ecb454594c pinctrl: qcom: Add sc7280 pinctrl driver
Add initial pinctrl driver to support pin configuration with
pinctrl framework for SC7280 SoC

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1604570192-15057-2-git-send-email-rnayak@codeaurora.org
[Change select PINCTRL_MSM to depends on PINCTRL_MSM]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-24 09:37:03 +01:00
Rajendra Nayak
5913f635a2 dt-bindings: pinctrl: qcom: Add sc7280 pinctrl bindings
Add device tree binding Documentation details for Qualcomm SC7280
TLMM block.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1604570192-15057-1-git-send-email-rnayak@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-24 09:34:59 +01:00
John Stultz
2a984219b5 pinctrl: qcom: Fix msm8953 Kconfig entry to depend on, not select PINCTRL_MSM
One fixup following my patch commit be117ca322 ("pinctrl:
qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then
a selected config") being queued in LinusW's tree, as a new
config entry was added for the msm8953 that also needs the
change.

Applies to LinusW's pinctrl devel tree.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Prasad Sodagudi <psodagud@codeaurora.org>
Cc: Vladimir Lypak <junak.pub@gmail.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20201110215619.86076-1-john.stultz@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-24 09:33:16 +01:00
Thomas Zimmermann
32228ff5f7 drm/fb-helper: Acquire modeset lock around shadow-buffer flushing
Flushing the fbdev's shadow buffer requires vmap'ing the BO memory, which
in turn requires pinning the BO. While being pinned, the BO cannot be moved
into VRAM for scanout. Consequently, a concurrent modeset operation that
involves the fbdev framebuffer would likely fail.

Resolve this problem be acquiring the modeset lock of the planes that use
the fbdev framebuffer. On non-atomic drivers, also acquire the mode-config
lock. This serializes the flushing of the framebuffer with concurrent
modeset operations.

v2:
	* only acquire struct drm_fb_helper.lock in damage blitter (Daniel,
	  Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-11-tzimmermann@suse.de
2020-11-24 09:31:34 +01:00
Thomas Zimmermann
7d4d269c09 drm/fb-helper: Copy dma-buf map before flushing shadow fb
Copy the vmap()'ed instance of struct dma_buf_map before modifying it,
in case the implementation of vunmap() depends on the exact address.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-10-tzimmermann@suse.de
2020-11-24 09:31:34 +01:00
Thomas Zimmermann
4270d6f60d drm/fb-helper: Restore damage area upon errors
If the damage handling fails, restore the damage area. The next invocation
of the damage worker will then perform the update.

v3:
	* Use drm_WARN_ONCE() with an error message to print warning
v2:
	* print a single warning if dirty callback fails (Daniel, Sebastian)
	* update comment

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-9-tzimmermann@suse.de
2020-11-24 09:31:21 +01:00
Thomas Zimmermann
1d46491d4a drm/fb-helper: Move damage blit code and its setup into separate routine
Introduce a separate function for the blit code and its vmap setup. Done
in preparation of additional changes. No functional changes are made.

v3:
	* Use drm_WARN_ONCE() with an error message to print warning
v2:
	* print a single warning if damage blitter fails

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-8-tzimmermann@suse.de
2020-11-24 09:29:09 +01:00
Thomas Zimmermann
fd2d856538 drm/fb-helper: Separate shadow-buffer flushing and calling dirty callback
Flushing the shadow framebuffer and invoking the dirty callback are two
separate operations, so do them separately. The flush operation is paired
with calls to vmap and vunmap. They are not needed for the dirty callback,
which performs its own invocations if necessary.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-7-tzimmermann@suse.de
2020-11-24 09:27:55 +01:00
Thomas Zimmermann
2b5f31aaa8 drm/fb-helper: Return early in damage worker
Returning early in the damage worker if no update is required. Makes the
code more readable. No functional changes are being made.

v3:
	* s/dirty/damage in commit message (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-6-tzimmermann@suse.de
2020-11-24 09:27:55 +01:00
Thomas Zimmermann
9622349ea1 drm/fb-helper: Rename dirty worker to damage worker
The dirty worker handles all damage updates, instead of just calling
the framebuffer's dirty callback. Rename it to damage worker. Also
rename related variables accordingly. No functional changes are made.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-5-tzimmermann@suse.de
2020-11-24 09:27:55 +01:00
Thomas Zimmermann
c1acbf08eb drm/client: Depend on GEM object kmap ref-counting
DRM client's vmap/vunmap functions don't allow for multiple vmap
operations. Calling drm_client_buffer_vmap() twice returns the same
mapping, then calling drm_client_buffer_vunmap() twice already unmaps
on the first call. This leads to unbalanced vmap refcounts. Fix this
by calling drm_gem_vmap() unconditionally in drm_client_buffer_vmap().

All drivers that support DRM clients have to implement correct ref-
counting for their vmap operations, or not vunmap at all. This is the
case for drivers that use CMA, SHMEM and VRAM helpers, and QXL. Other
drivers are not affected.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-4-tzimmermann@suse.de
2020-11-24 09:27:54 +01:00
Thomas Zimmermann
763aea17bf drm/fb-helper: Unmap client buffer during shutdown
The fbdev helper's generic probe function establishes a mapping for
framebuffers without shadow buffer. The clean-up function did not unmap
the buffer object. Add the unmap operation.

As fbdev devices are usally released during system shutdown, this has
not been a problem in practice.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-3-tzimmermann@suse.de
2020-11-24 09:27:47 +01:00
Thomas Zimmermann
a102172c7f drm/fb-helper: Call dirty helper after writing to fbdev
If fbdev uses a shadow framebuffer, call the damage handler. Otherwise
the update might not make it to the screen.

v2:
	* mark virtual screen as dirty (Ville)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 222ec45f4c ("drm/fb_helper: Support framebuffers in I/O memory")
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-2-tzimmermann@suse.de
2020-11-24 09:19:40 +01:00
Takashi Iwai
4390628738 Merge branch 'topic/usb-audio-refactoring' into for-next
Pull the USB audio improvement

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-24 09:13:00 +01:00
Thomas Zimmermann
2f04636f49 drm/shmem-helper: Removed drm_gem_shmem_create_object_cached()
Cached page mappings are now the default for SHMEM GEM objects. Remove
the obsolete create function for cached mappings.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117133156.26822-3-tzimmermann@suse.de
2020-11-24 09:10:33 +01:00
Thomas Zimmermann
0cf2ef46c6 drm/shmem-helper: Use cached mappings by default
SHMEM-buffer backing storage is allocated from system memory; which is
typically cachable. The default mode for SHMEM objects is writecombine
though.

Unify SHMEM semantics by defaulting to cached mappings. The exception
is pages imported via dma-buf. DMA memory is usually not cached.

DRM drivers that require write-combined mappings set the map_wc flag
in struct drm_gem_shmem_object to true. This currently affects lima,
panfrost and v3d.

The drivers mgag200, udl, virtio and vkms continue to use default
shmem mappings.

The drivers cirrus and gm12u320 change caching flags. Both used
writecombine and now switch over to shmem defaults. Both drivers use
SHMEM objects as shadow buffers for internal video memory, so cached
mappings will not affect them negatively.

v3:
	* set value of shmem pointer before dereferencing it in
	  __drm_gem_shmem_create() (Dan, kernel test robot)
v2:
	* recreate patch on top of latest SHMEM helpers
	* update lima, panfrost, v3d to select writecombine (Daniel, Rob)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117133156.26822-2-tzimmermann@suse.de
2020-11-24 09:10:21 +01:00
Greg Kroah-Hartman
749c1e1481 First set of new device support, features and cleanups for IIO in the 5.11 cycle
Usual mixed bag of new drivers / device support + cleanups etc with the
 addition of a fairly big set of yaml conversions.
 
 Txt to yaml format conversions.
 In some cases dropped separate binding and moved to trivial devices (drop).
 
 Listed by manufacturer
   - dht11 temperature(drop)
   - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
     adi,adis16480 adi,adf4350
   - ams,as3935
   - asahi-kasei,ak8974
   - atmel,sama5d2-adc
   - avago,apds9300 avago,apds9960
   - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
   - brcm,iproc-static-adc
   - capella,cm36651
   - domintech,dmard06(drop)
   - fsl,mag3110 fsl,mma8452 fsl,vf610-dac
   - hoperf,hp03
   - honeywell,hmc5843
   - kionix,kxcjk1013
   - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
     maxim,max31856 maxim,max31855k maxim,max44009
     maxim,max5481 maxim,max5821
   - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
   - mediatek,mt2701-auxadc
   - melexis,mlx90614 melexis,mlx90632
   - memsic,mmc35240(drop)
   - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
   - murata,zap2326
   - nxp,fxas21002c nxp,lpc1850-dac
   - pni,rm3100
   - qcom,pm8018-adc qcom,spmi-iadc
   - renesas,isl29501 renesas,rcar-gyroadc
   - samsung,sensorhub-rinato
   - sensiron,sgp30
   - sentech,sx9500
   - sharp,gp2ap020a00f
   - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
   - ti,adc084s021 ti,ads124s08
     ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
     ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
   - upisemi,us51882
   - vishay,vcnl4035
   - x-powers,axp209
 
 New device support
 * adi,ad5685
   - Add support for AD5338R dual output 10-bit DAC
   - Add DT-binding doc.
 * mediatek,mt6360
   - New driver for this SoC ADC with bindings and using new channel label
     support in the IIO core.
 * st,lsm6dsx
   - Add support for LSM6DST
 
 Core:
 * Add "label" to device channels, provided via a new core callback. Including
   DT docs for when that is the source, and ABI docs.
 * Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
 * dmaengine, unwrap use of iio_buffer_set_attrs()
 * Drop iio_buffer_set_attrs()
 * Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
   no handler has run.
 * Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
   any known existing drivers, but will impact a future one.
 * kernel-doc fix in trigger.h
 * file-ops ordering cleanup
 
 Features
 * semtech,sx9310
   - Add control of hardware gain, proximity thresholds, hysteresis and
     debounce.
   - Increase what information on hardware configuration can be provided
     via DT.
 
 Cleanup and minor features
 * adi,ad5685
   - Add of_match_table
 * adi,ad7292
   - Drop pointless spi_set_drvdata() call
 * adi,ad7298
   - Drop platform data and tidy up external reference config.
 * adi,ad7303
   - Drop platform data handling as unused.
 * adi,ad7768
   - Add new label attribute for channels provided from dt.
 * adi,ad7887
   - devm_ usage in probe simplifying remove and error handling.
 * adi,adis16201
   - Drop pointless spi_set_drvdata() call
 * adi,adis16209
   - Drop pointless spi_set_drvdata() call
 * adi,adis16240
   - White space fixup
 * adi,adxl372
   - use new devm_iio_triggered-buffer_setup_ext()
 * amlogic,meson-saradc
   - Drop pointless semicolon.
 * amstaos,tsl2563
   - Put back i2c_device_id table as needed for greybus probing.
 * atmel,at91_adc
   - Use of_device_get_match_data() instead of open coding it.
   - Constify some driver data
   - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
   - Drop platform data as mostly dead code.
   - Tidy up reference voltage logic
 * atmel-sama5d2
   - Drop a pointless semicolon
   - Merge buffer and trigger init into a separate function
   - Use new devm_iio_triggered_buff_setup_ext()
 * avago,apds9960
   - Drop a pointless semicolon
 * bosch,bmc150
   - Drop a pointless semicolon
   - Use new iio_triggered_buffer_setup_ext()
 * bosch,bmp280
   - Drop a pointless semicolon
 * fsl,mma8452
   - Constification
 * (google),cros_ec
   - Use new devm_iio_triggered_buffer_setup_ext()
 * hid-sensors
   - Use new iio_triggered_buffer_setup_ext()
 * ingenic,adc
   - Drop a pointless semicolon
 * invensense,icm426xx
   - Fix MAINTAINERS entry missing :
 * mediatek,mt6577_audxac
   - Add binding doc for mt8516 compatible with mt8173
 * motorola,cpcap-adc
   - Fix an implicit fallthrough marking that clang needs to avoid warning.
 * samsung,exynos-adc
   - Stop relying on users counter form input device in ISR.
 * st,lsm6dsx
   - add vdd and vddio regulator control (including binding update)
 * st,stm32-adc
   - Tidy up code for dma transfers.
   - Adapt clock duty cycle for proper functioning. Note no known problems
     with existing boards.
 * st,vl53l0x-i2c
   - Put back i2c_device_id table as needed for greybus probing.
 * vishay,vcnl4035
   - Put back i2c_device_id table as needed for greybus probing.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl+8H3IRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FogLLA//cE+rUI0ztkE5KD1DY5mu8dy3GotLJe2y
 kVlYao/8H4n3qL9Sm+i47v7pZZfB6UH5jaPa3BqXcGU3HaBaTSza5VhP/hDyfpgD
 Nt46UyE0FxcNEpwqiiyVuVFFx9ifUOayzKwL9ckyPs7n1X6ecZA+sPdmSQLmFzoZ
 IYDR148UxlAr33j7DVF1DLiIdObCIpNc3pn7YDflT/NnXvRY2XgIjqeOiPbldVgm
 8nGgeSQXTyYBKaSyv6seE2qaxyDAhjkz7SVOidWZxPgMjiJJmpRdL3yCn2wVCCCy
 eLh9Ez0zPhywOhsRImICZ9ds0+Wq1Ke2kVqo0N8FJtB+JVZig+R1ElTaUKhES7B2
 zKW1PR3nknP2oo3LWoXL6QR4vm0RcasRYnE2Qmtv6y04Hv3vbdyx6ZW+WCwrlsM8
 fCxHV/m/NN4piTHEFFFkW912GMZM4XqnJ/H4bLd4oA+HP/2vzMuzdBLKZPZRdYYf
 Xd2YTF+iyNYlbN+ZLDd9840cAcKabPsd+ptaJh7lb0MUPPcv5qukhwIBs1/vqrE6
 9/AnJ/Wj/oQZoDbcrgnMVoRn8dxqnQkd883sxiHZAvztEn1CQ9dDyUfKlHHB5BOD
 GhtrEyMn87VWM19yqArW/3ZU7dPBbXHkzlw6FQ67gIYbqaCRwfRi26FCJh0C6Kzi
 auCmjubaALo=
 =kkcj
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.11 cycle

Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.

Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).

Listed by manufacturer
  - dht11 temperature(drop)
  - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
    adi,adis16480 adi,adf4350
  - ams,as3935
  - asahi-kasei,ak8974
  - atmel,sama5d2-adc
  - avago,apds9300 avago,apds9960
  - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
  - brcm,iproc-static-adc
  - capella,cm36651
  - domintech,dmard06(drop)
  - fsl,mag3110 fsl,mma8452 fsl,vf610-dac
  - hoperf,hp03
  - honeywell,hmc5843
  - kionix,kxcjk1013
  - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
    maxim,max31856 maxim,max31855k maxim,max44009
    maxim,max5481 maxim,max5821
  - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
  - mediatek,mt2701-auxadc
  - melexis,mlx90614 melexis,mlx90632
  - memsic,mmc35240(drop)
  - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
  - murata,zap2326
  - nxp,fxas21002c nxp,lpc1850-dac
  - pni,rm3100
  - qcom,pm8018-adc qcom,spmi-iadc
  - renesas,isl29501 renesas,rcar-gyroadc
  - samsung,sensorhub-rinato
  - sensiron,sgp30
  - sentech,sx9500
  - sharp,gp2ap020a00f
  - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
  - ti,adc084s021 ti,ads124s08
    ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
    ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
  - upisemi,us51882
  - vishay,vcnl4035
  - x-powers,axp209

New device support
* adi,ad5685
  - Add support for AD5338R dual output 10-bit DAC
  - Add DT-binding doc.
* mediatek,mt6360
  - New driver for this SoC ADC with bindings and using new channel label
    support in the IIO core.
* st,lsm6dsx
  - Add support for LSM6DST

Core:
* Add "label" to device channels, provided via a new core callback. Including
  DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
  no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
  any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup

Features
* semtech,sx9310
  - Add control of hardware gain, proximity thresholds, hysteresis and
    debounce.
  - Increase what information on hardware configuration can be provided
    via DT.

Cleanup and minor features
* adi,ad5685
  - Add of_match_table
* adi,ad7292
  - Drop pointless spi_set_drvdata() call
* adi,ad7298
  - Drop platform data and tidy up external reference config.
* adi,ad7303
  - Drop platform data handling as unused.
* adi,ad7768
  - Add new label attribute for channels provided from dt.
* adi,ad7887
  - devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
  - Drop pointless spi_set_drvdata() call
* adi,adis16209
  - Drop pointless spi_set_drvdata() call
* adi,adis16240
  - White space fixup
* adi,adxl372
  - use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
  - Drop pointless semicolon.
* amstaos,tsl2563
  - Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
  - Use of_device_get_match_data() instead of open coding it.
  - Constify some driver data
  - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
  - Drop platform data as mostly dead code.
  - Tidy up reference voltage logic
* atmel-sama5d2
  - Drop a pointless semicolon
  - Merge buffer and trigger init into a separate function
  - Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
  - Drop a pointless semicolon
* bosch,bmc150
  - Drop a pointless semicolon
  - Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
  - Drop a pointless semicolon
* fsl,mma8452
  - Constification
* (google),cros_ec
  - Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
  - Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
  - Drop a pointless semicolon
* invensense,icm426xx
  - Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
  - Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
  - Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
  - Stop relying on users counter form input device in ISR.
* st,lsm6dsx
  - add vdd and vddio regulator control (including binding update)
* st,stm32-adc
  - Tidy up code for dma transfers.
  - Adapt clock duty cycle for proper functioning. Note no known problems
    with existing boards.
* st,vl53l0x-i2c
  - Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
  - Put back i2c_device_id table as needed for greybus probing.

* tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
  dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
  dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
  dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
  dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.
  dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion
  dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion.
  dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion
  dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion
  dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.
  dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
  dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor
  dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.
  dt-bindings:iio:light:ti,opt3001: txt to yaml conversion
  dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.
  dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
  dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.
  dt-bindings:iio:light:avago,apds9960: txt to yaml conversion
  dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.
  dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion
  dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion
  ...
2020-11-24 08:30:08 +01:00
Jonathan Marek
2802821a66 arm64: dts: qcom: fix serial output for sm8250-hdk
The uart2 node has been renamed, apply the change to sm8250-hdk dts too so
that serial output works.

Fixes: 91ed0e90fc ("arm64: dts: qcom: add sm8250 hdk dts")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20201123143538.14198-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23 22:05:38 -06:00
Rikard Falkeborn
dd8f52660c remoteproc: qcom_sysmon: Constify qmi_indication_handler
The only usage of qmi_indication_handler[] is to pass its address to
qmi_handle_init() which accepts a const pointer. Make it const to allow
the compiler to put it in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20201122234540.34623-1-rikard.falkeborn@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-23 22:02:37 -06:00
Karan Tilak Kumar
3256b46823 scsi: fnic: Validate io_req before others
We need to check for a valid io_req before we check other data. Also,
remove redundant checks.

Link: https://lore.kernel.org/r/20201121023337.19295-1-kartilak@cisco.com
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23 22:38:40 -05:00
Karan Tilak Kumar
74ae6d6a68 scsi: fnic: Set scsi_set_resid() only for underflow
Set scsi_set_resid() only if FCPIO_ICMND_CMPL_RESID_UNDER is set.

Link: https://lore.kernel.org/r/20201121015134.18872-1-kartilak@cisco.com
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23 22:37:50 -05:00
Karan Tilak Kumar
875d4eda3b scsi: fnic: Change shost_printk() to FNIC_MAIN_DBG()
Replace shost_printk() with FNIC_MAIN_DBG() so that these log messages are
controlled by fnic_log_level flag in fnic_handle_link.

Link: https://lore.kernel.org/r/20201121013739.18701-1-kartilak@cisco.com
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23 22:36:56 -05:00
Karan Tilak Kumar
f9e2beb990 scsi: fnic: Avoid looping in TRANS ETH on unload
Avoid looping in fnic_scsi_abort_io() before sending fw reset when fnic is
in TRANS ETH state and when we have not received any link events.

Link: https://lore.kernel.org/r/20201121012145.18522-1-kartilak@cisco.com
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23 22:32:50 -05:00
Eric Biggers
bde4933490 fs-verity: move structs needed for file signing to UAPI header
Although it isn't used directly by the ioctls,
"struct fsverity_descriptor" is required by userspace programs that need
to compute fs-verity file digests in a standalone way.  Therefore
it's also needed to sign files in a standalone way.

Similarly, "struct fsverity_formatted_digest" (previously called
"struct fsverity_signed_digest" which was misleading) is also needed to
sign files if the built-in signature verification is being used.

Therefore, move these structs to the UAPI header.

While doing this, try to make it clear that the signature-related fields
in fsverity_descriptor aren't used in the file digest computation.

Acked-by: Luca Boccassi <luca.boccassi@microsoft.com>
Link: https://lore.kernel.org/r/20201113211918.71883-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-11-23 19:30:14 -08:00
Karan Tilak Kumar
90b3a93803 scsi: fnic: Change shost_printk() to FNIC_FCS_DBG()
Replacing shost_printk with FNIC_FCS_DBG() so that these log messages are
controlled by fnic_log_level flag in fnic_fip_handler_timer.

Bumping up version number from 47 to 49 to maintain same level as internal
version.

Link: https://lore.kernel.org/r/20201120220712.16708-1-kartilak@cisco.com
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23 22:26:22 -05:00
Joe Perches
89eddb4010 scsi: pm8001: Make implicit use of pm8001_ha in pm8001_printk() explicit
Make the pm8001_printk() macro take an explicit HBA instead of assuming the
existence of an unspecified pm8001_ha argument.

Miscellanea:

 - Add pm8001_ha to the few uses of pm8001_printk()

 - Add HBA to the pm8001_dbg macro call to pm8001_printk()

Link: https://lore.kernel.org/r/0e17a4c845f15e18f98b346ffb9b039584d21cdd.1605914030.git.joe@perches.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23 22:22:11 -05:00
Joe Perches
1b5d279328 scsi: pm8001: Neaten debug logging macros and uses
Every PM8001_<FOO>_DBG macro uses an internal call to pm8001_printk.

Convert all uses of:

	PM8001_<FOO>_DBG(hba, pm8001_printk(fmt, ...))
to
	pm8001_dbg(hba, <FOO>, fmt, ...)

so the visual complexity of each macro is reduced.

The repetitive macro definitions are converted to a single pm8001_dbg and
the level is concatenated using PM8001_##level##_LOGGING for the specific
level test.

Done with coccinelle, checkpatch and a little typing of the new macro
definition.

Miscellanea:

 - Coalesce formats

 - Realign arguments

 - Add missing terminating newlines to formats

 - Remove trailing spaces from formats

 - Change defective loop with printk(KERN_INFO... to emit a 16 byte hex
   block to %p16h

Link: https://lore.kernel.org/r/49f36a93af7752b613d03c89a87078243567fd9a.1605914030.git.joe@perches.com
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23 22:22:11 -05:00
Xu Wang
27a34943bd scsi: pm8001: Remove typecast for pointer returned by kcalloc()
Stop typecasting the value returned by kcalloc().

Link: https://lore.kernel.org/r/20201120083648.9319-1-vulab@iscas.ac.cn
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23 22:17:18 -05:00
Finn Thain
bdd1cc0377 scsi: NCR5380: Reduce NCR5380_maybe_release_dma_irq() call sites
Refactor to avoid needless calls to NCR5380_maybe_release_dma_irq().
This makes the machine code smaller and the source more readable.

Link: https://lore.kernel.org/r/c1317ae8fdcb498460de5d7ea0bd62a42f5eeca8.1605847196.git.fthain@telegraphics.com.au
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23 22:13:55 -05:00
Finn Thain
03fe6a640a scsi: atari_scsi: Fix race condition between .queuecommand and EH
It is possible that bus_reset_cleanup() or .eh_abort_handler could be
invoked during NCR5380_queuecommand(). If that takes place before the new
command is enqueued and after the ST-DMA "lock" has been acquired, the
ST-DMA "lock" will be released again. This will result in a lost DMA
interrupt and a command timeout. Fix this by excluding EH and interrupt
handlers while the new command is enqueued.

Link: https://lore.kernel.org/r/af25163257796b50bb99d4ede4025cea55787b8f.1605847196.git.fthain@telegraphics.com.au
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23 22:12:09 -05:00
Bjorn Andersson
66df79ccbc scsi: ufs: Adjust logic in common ADAPT helper
The introduction of ufshcd_dme_configure_adapt() refactored out duplication
from the Mediatek and Qualcomm drivers.

Both these implementations had the logic of:

    gear_tx == UFS_HS_G4 => PA_INITIAL_ADAPT
    gear_tx != UFS_HS_G4 => PA_NO_ADAPT

but now both implementations pass PA_INITIAL_ADAPT as "adapt_val" and if
gear_tx is not UFS_HS_G4 that is replaced with PA_INITIAL_ADAPT. In other
words, it's PA_INITIAL_ADAPT in both above cases.

The result is that e.g. Qualcomm SM8150 has no longer functional UFS, so
adjust the logic to match the previous implementation.

Link: https://lore.kernel.org/r/20201121044810.507288-1-bjorn.andersson@linaro.org
Fixes: fc85a74e28 ("scsi: ufs: Refactor ADAPT configuration function")
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-23 22:07:54 -05:00
Christophe JAILLET
5112cf59d7 sctp: Fix some typo
s/tranport/transport/

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201122180704.1366636-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23 17:44:11 -08:00
Dan Williams
9a7e3d7f05 ACPI: NFIT: Fix input validation of bus-family
Dan reports that smatch thinks userspace can craft an out-of-bound bus
family number. However, nd_cmd_clear_to_send() blocks all non-zero
values of bus-family since only the kernel can initiate these commands.
However, in the speculation path, family is a user controlled array
index value so mask it for speculation safety. Also, since the
nd_cmd_clear_to_send() safety is non-obvious and possibly may change in
the future include input validation as if userspace could get past the
nd_cmd_clear_to_send() gatekeeper.

Link: http://lore.kernel.org/r/20201111113000.GA1237157@mwanda
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6450ddbd5d ("ACPI: NFIT: Define runtime firmware activation commands")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-11-23 17:43:53 -08:00
Eyal Birger
d549699048 net/packet: fix packet receive on L3 devices without visible hard header
In the patchset merged by commit b9fcf0a0d8
("Merge branch 'support-AF_PACKET-for-layer-3-devices'") L3 devices which
did not have header_ops were given one for the purpose of protocol parsing
on af_packet transmit path.

That change made af_packet receive path regard these devices as having a
visible L3 header and therefore aligned incoming skb->data to point to the
skb's mac_header. Some devices, such as ipip, xfrmi, and others, do not
reset their mac_header prior to ingress and therefore their incoming
packets became malformed.

Ideally these devices would reset their mac headers, or af_packet would be
able to rely on dev->hard_header_len being 0 for such cases, but it seems
this is not the case.

Fix by changing af_packet RX ll visibility criteria to include the
existence of a '.create()' header operation, which is used when creating
a device hard header - via dev_hard_header() - by upper layers, and does
not exist in these L3 devices.

As this predicate may be useful in other situations, add it as a common
dev_has_header() helper in netdevice.h.

Fixes: b9fcf0a0d8 ("Merge branch 'support-AF_PACKET-for-layer-3-devices'")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20201121062817.3178900-1-eyal.birger@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23 17:29:36 -08:00
Hao Si
2663b33885 soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
The local variable 'cpumask_t mask' is in the stack memory, and its address
is assigned to 'desc->affinity' in 'irq_set_affinity_hint()'.
But the memory area where this variable is located is at risk of being
modified.

During LTP testing, the following error was generated:

Unable to handle kernel paging request at virtual address ffff000012e9b790
Mem abort info:
  ESR = 0x96000007
  Exception class = DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000007
  CM = 0, WnR = 0
swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000075ac5e07
[ffff000012e9b790] pgd=00000027dbffe003, pud=00000027dbffd003,
pmd=00000027b6d61003, pte=0000000000000000
Internal error: Oops: 96000007 [#1] PREEMPT SMP
Modules linked in: xt_conntrack
Process read_all (pid: 20171, stack limit = 0x0000000044ea4095)
CPU: 14 PID: 20171 Comm: read_all Tainted: G    B   W
Hardware name: NXP Layerscape LX2160ARDB (DT)
pstate: 80000085 (Nzcv daIf -PAN -UAO)
pc : irq_affinity_hint_proc_show+0x54/0xb0
lr : irq_affinity_hint_proc_show+0x4c/0xb0
sp : ffff00001138bc10
x29: ffff00001138bc10 x28: 0000ffffd131d1e0
x27: 00000000007000c0 x26: ffff8025b9480dc0
x25: ffff8025b9480da8 x24: 00000000000003ff
x23: ffff8027334f8300 x22: ffff80272e97d000
x21: ffff80272e97d0b0 x20: ffff8025b9480d80
x19: ffff000009a49000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000040
x11: 0000000000000000 x10: ffff802735b79b88
x9 : 0000000000000000 x8 : 0000000000000000
x7 : ffff000009a49848 x6 : 0000000000000003
x5 : 0000000000000000 x4 : ffff000008157d6c
x3 : ffff00001138bc10 x2 : ffff000012e9b790
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
 irq_affinity_hint_proc_show+0x54/0xb0
 seq_read+0x1b0/0x440
 proc_reg_read+0x80/0xd8
 __vfs_read+0x60/0x178
 vfs_read+0x94/0x150
 ksys_read+0x74/0xf0
 __arm64_sys_read+0x24/0x30
 el0_svc_common.constprop.0+0xd8/0x1a0
 el0_svc_handler+0x34/0x88
 el0_svc+0x10/0x14
Code: f9001bbf 943e0732 f94066c2 b4000062 (f9400041)
---[ end trace b495bdcb0b3b732b ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
SMP: failed to stop secondary CPUs 0,2-4,6,8,11,13-15
Kernel Offset: disabled
CPU features: 0x0,21006008
Memory Limit: none
---[ end Kernel panic - not syncing: Fatal exception ]---

Fix it by using 'cpumask_of(cpu)' to get the cpumask.

Signed-off-by: Hao Si <si.hao@zte.com.cn>
Signed-off-by: Lin Chen <chen.lin5@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-11-23 19:27:45 -06:00
Jakub Kicinski
cc69837fca net: don't include ethtool.h from netdevice.h
linux/netdevice.h is included in very many places, touching any
of its dependecies causes large incremental builds.

Drop the linux/ethtool.h include, linux/netdevice.h just needs
a forward declaration of struct ethtool_ops.

Fix all the places which made use of this implicit include.

Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23 17:27:04 -08:00
Biwen Li
e95f287dee soc: fsl: handle RCPM errata A-008646 on SoC LS1021A
Hardware issue:
- Reading register RCPM_IPPDEXPCR1 always return zero, this causes
  system firmware could not get correct information and wrongly do
  clock gating for all wakeup source IP during system suspend. Then
  those IPs will never get chance to wake system.

Workaround:
- Copy register RCPM_IPPDEXPCR1's setting to register SCFG_SPARECR8
  to allow system firmware's psci method read it and do things accordingly.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-11-23 19:16:02 -06:00
Christophe JAILLET
7fd6372e27 net: pch_gbe: Use 'dma_free_coherent()' to undo 'dma_alloc_coherent()'
Memory allocation are done with 'dma_alloc_coherent()'. Be consistent
and use 'dma_free_coherent()' to free the corresponding memory.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201121090330.1332543-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23 17:01:48 -08:00
Christophe JAILLET
8ff39301ef net: pch_gbe: Use dma_set_mask_and_coherent to simplify code
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by
an equivalent 'dma_set_mask_and_coherent()' which is much less verbose.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201121090302.1332491-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23 17:01:48 -08:00
Jakub Kicinski
1119ea8019 Merge branch 'net-dsa-hellcreek-minor-cleanups'
Kurt Kanzenbach says:

====================
net: dsa: hellcreek: Minor cleanups

fix two minor issues in the hellcreek driver.
====================

Link: https://lore.kernel.org/r/20201121114455.22422-1-kurt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23 16:57:23 -08:00
Kurt Kanzenbach
ed5ef9fb20 net: dsa: hellcreek: Don't print error message on defer
When DSA is not loaded when the driver is probed an error message is
printed. But, that's not really an error, just a defer. Use dev_err_probe()
instead.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23 16:57:21 -08:00
Kurt Kanzenbach
8551fad63c net: dsa: tag_hellcreek: Cleanup includes
Remove unused and add needed includes. No functional change.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23 16:57:21 -08:00
Sylwester Dziedziuch
2980cbd4dc i40e: Fix removing driver while bare-metal VFs pass traffic
Prevent VFs from resetting when PF driver is being unloaded:
- introduce new pf state: __I40E_VF_RESETS_DISABLED;
- check if pf state has __I40E_VF_RESETS_DISABLED state set,
  if so, disable any further VFLR event notifications;
- when i40e_remove (rmmod i40e) is called, disable any resets on
  the VFs;

Previously if there were bare-metal VFs passing traffic and PF
driver was removed, there was a possibility of VFs triggering a Tx
timeout right before iavf_remove. This was causing iavf_close to
not be called because there is a check in the beginning of  iavf_remove
that bails out early if adapter->state < IAVF_DOWN_PENDING. This
makes it so some resources do not get cleaned up.

Fixes: 6a9ddb36ee ("i40e: disable IOV before freeing resources")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20201120180640.3654474-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23 16:52:59 -08:00