Commit 20b92a30b5 ("mmc: sdhci: update signal voltage switch code")
removed voltage switch delays from sdhci because mmc core had been
enhanced to support them. However that assumed that sdhci_set_ios()
did a single clock change, which it did not, and so the delays in mmc
core, which should have come after the first clock change, were not
effective.
Fix by avoiding re-configuring UHS and preset settings when the clock
is turning on and the settings have not changed. That then also avoids
the associated clock changes, so that then sdhci_set_ios() does a single
clock change when voltage switching, and the mmc core delays become
effective.
To do that has meant keeping track of driver strength (host->drv_type),
and cases of reinitialization (host->reinit_uhs).
Note also, the 'turning_on_clk' restriction should not be necessary
but is done to minimize the impact of the change on stable kernels.
Fixes: 20b92a30b5 ("mmc: sdhci: update signal voltage switch code")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221128133259.38305-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
As the return value is not 0 only in case there is no such notifier
block registered, add a WARN_ON_ONCE() to yell about it.
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20221125100255.1786741-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dwc->desired_dr_role is changed by dwc3_set_mode inside a spinlock but
then read by __dwc3_set_mode outside of that lock. This can lead to a
race condition when very quick successive role switch events happen:
CPU A
dwc3_set_mode(DWC3_GCTL_PRTCAP_HOST) // first role switch event
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_HOST
spin_unlock_irqrestore(&dwc->lock, flags);
queue_work(system_freezable_wq, &dwc->drd_work);
CPU B
__dwc3_set_mode
// ....
spin_lock_irqsave(&dwc->lock, flags);
// desired_dr_role is DWC3_GCTL_PRTCAP_HOST
dwc3_set_prtcap(dwc, dwc->desired_dr_role);
spin_unlock_irqrestore(&dwc->lock, flags);
CPU A
dwc3_set_mode(DWC3_GCTL_PRTCAP_DEVICE) // second event
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_DEVICE
spin_unlock_irqrestore(&dwc->lock, flags);
CPU B (continues running __dwc3_set_mode)
switch (dwc->desired_dr_role) { // DWC3_GCTL_PRTCAP_DEVICE
// ....
case DWC3_GCTL_PRTCAP_DEVICE:
// ....
ret = dwc3_gadget_init(dwc);
We then have DWC3_GCTL.DWC3_GCTL_PRTCAPDIR = DWC3_GCTL_PRTCAP_HOST and
dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST but initialized the
controller in device mode. It's also possible to get into a state
where both host and device are intialized at the same time.
Fix this race by creating a local copy of desired_dr_role inside
__dwc3_set_mode while holding dwc->lock.
Fixes: 41ce1456e1 ("usb: dwc3: core: make dwc3_set_mode() work properly")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20221128161526.79730-1-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This includes following Thunderbolt/USB4 changes for the v6.2 merge
window:
- Add wake on connect/disconnect for USB4 ports
- A couple of minor cleanups
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=UvLm
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.2 merge window
This includes following Thunderbolt/USB4 changes for the v6.2 merge
window:
- Add wake on connect/disconnect for USB4 ports
- A couple of minor cleanups
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Add wake on connect/disconnect on USB4 ports
thunderbolt: ACPI: Use the helper fwnode_find_reference()
thunderbolt: Remove redundant assignment to variable len
thunderbolt: Use str_enabled_disabled() helper
The clk_disable_unprepare() should be called in the error handling
of devm_clk_bulk_get_optional, fix it by replacing devm_clk_get_optional
and clk_prepare_enable by devm_clk_get_optional_enabled.
Fixes: f5eccd94b6 ("mmc: mediatek: Add subsys clock control for MT8192 msdc")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221125090141.3626747-1-cuigaosheng1@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
CoreSight updatesfor v6.2 includes :
- Support for ETMv4 probing on hotplugged CPUs
- Fix TRBE driver for cpuhp state refcounting
- Fix CTI driver NULL pointer dereferencing
- Fix comment for repeated word
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEuFy0byloRoXZHaWBxcXRZPKyBqEFAmOE/p4ACgkQxcXRZPKy
BqEG/BAAlQES7dHt666nK089mR/70zqgf5FP/asnOpeSbjiA7yORRfiYwWuXL8hr
uN/3lrynjUMKrnL6ycRNE6Bg0hdyh+kz2+5qz9MXQ/9c7kM+PdCcZ7WKOdw1xP9B
1ekU1xcVqD3LIoYUYB/+OcWt9uHHctjJaKYYV7WsmPROcw3HZRdKC8NDA3rf8A/l
j6v75AqfNddvjd8kFe/4bIv/TXE0tj5SqAXekffKFhX0MYaI0CA7QEhM1E0DqgTH
sZ0mt+rulKBqy2SB6CHq5RRLYBlQA6s6oV0fnmLjFDI0TVNzIB7kBKULgW3kZohl
9KbQl3WH8Wqy0Lp0GXqPuoZeVvm2eL5PjpCju85N4RwhIIkneqiRVRVR4aqKyV1F
E0JfY+/s8hTfh8qC5mePCrExJZR9YZKPUV0fN3ePmJyFYmqRIbZNxjpEPM3zvaxk
xiACzKts6+SNdEj4XSSrdmfE6qQo8dcVJ6ehBt0XQtWcsC8HNm3t78W6fga74/lA
YQHDvT7YXiS/XsnHzvdErWTiI3ZgdGXQfVfbUWaY6QURYA/Nb32LWa8fzz1OHoZu
s4bfBIiGV9qAqd1hviiidMess0KdsTN5NyaLUC+7ym09F9pT3g/mdSzINVx6eIWa
6MxdCSBcOVCX0VrUd0zjbYriVbBBMFVFkN7rJ1VzQx//V5NwVfQ=
=YWNK
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Update for v6.2
CoreSight updatesfor v6.2 includes :
- Support for ETMv4 probing on hotplugged CPUs
- Fix TRBE driver for cpuhp state refcounting
- Fix CTI driver NULL pointer dereferencing
- Fix comment for repeated word
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: etm4x: fix repeated words in comments
coresight: cti: Fix null pointer error on CTI init before ETM
coresight: trbe: remove cpuhp instance node before remove cpuhp state
coresight: etm4x: add CPU hotplug support for probing
- New feature of graceful hard-reset. Instead of immediately killing the
user-process when a command submission times out, we wait a bit and give
the user-process notification and let it try to close things gracefully,
with the ability to retrieve debug information.
- Enhance the EventFD mechanism. Add new events such as access to illegal
address (RAZWI), page fault, device unavailable. In addition, change the
event workqueue to be handled in a single-threaded workqueue.
- Allow the control device to work during reset of the ASIC, to enable
monitoring applications to continue getting the data.
- Add handling for Gaudi2 with PCI revision 2.
- Reduce severity of prints due to power/thermal events.
- Change how we use the h/w to perform memory scrubbing in Gaudi2.
- Multiple bug fixes, refactors and renames.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmN+QSEACgkQZR1NuKta
54Ducgf+PsD85BWXlqWkTa2S8tn7h+OCETapAEY+JMRu1UB15ccLGZlH1O/L2try
NBjUEcbzvS1KPYmNMubKXOIlacTJrukaoqvtMfLSe1+Y/zvfTpF1+LGLp39wSRo8
R36A1VEQxalSZoFhQMERVoWBfjiVaW3ENqe3H9Vb/ab9QdMUzP4P4uaLsECtsLSy
ft31ZcN+jPjhjSYC7xZjzd3KXvVqlQ/5TsXdX6nsxphrOUiKxT55Gsypkx5O4vt1
Q4aw+v3Z0NgknDF90n7O90y/wgE3OqKHiKl+9l7lS/WkLhhaWknJ9zJlfLI8uiEH
UjMku/EpH6SSN5hrCDQvtFaXJSgiWQ==
=cHXD
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-next-2022-11-23' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
This tag contains habanalabs driver changes for v6.2:
- New feature of graceful hard-reset. Instead of immediately killing the
user-process when a command submission times out, we wait a bit and give
the user-process notification and let it try to close things gracefully,
with the ability to retrieve debug information.
- Enhance the EventFD mechanism. Add new events such as access to illegal
address (RAZWI), page fault, device unavailable. In addition, change the
event workqueue to be handled in a single-threaded workqueue.
- Allow the control device to work during reset of the ASIC, to enable
monitoring applications to continue getting the data.
- Add handling for Gaudi2 with PCI revision 2.
- Reduce severity of prints due to power/thermal events.
- Change how we use the h/w to perform memory scrubbing in Gaudi2.
- Multiple bug fixes, refactors and renames.
* tag 'misc-habanalabs-next-2022-11-23' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (63 commits)
habanalabs: fix VA range calculation
habanalabs: fail driver load if EEPROM errors detected
habanalabs: make print of engines idle mask more readable
habanalabs: clear non-released encapsulated signals
habanalabs: don't put context in hl_encaps_handle_do_release_sob()
habanalabs: print context refcount value if hard reset fails
habanalabs: add RMWREG32_SHIFTED to set a val within a mask
habanalabs: fix rc when new CPUCP opcodes are not supported
habanalabs/gaudi2: added memset for the cq_size register
habanalabs: added return value check for hl_fw_dynamic_send_clear_cmd()
habanalabs: increase the size of busy engines mask
habanalabs/gaudi2: change memory scrub mechanism
habanalabs: extend process wait timeout in device fine
habanalabs: check schedule_hard_reset correctly
habanalabs: reset device if still in use when released
habanalabs/gaudi2: return to reset upon SM SEI BRESP error
habanalabs/gaudi2: don't enable entries in the MSIX_GW table
habanalabs/gaudi2: remove redundant firmware version check
habanalabs/gaudi: fix print for firmware-alive event
habanalabs: fix print for out-of-sync and pkt-failure events
...
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following commits will make use of it to find codec DAI, define it
first.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following commits will make use of it to find codec DAI, define it
first.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is existing define for codec DAI name, make use of it when setting
codec DAI name.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Horatiu Vultur says:
====================
Add support for lan966x IS2 VCAP
This provides initial support for lan966x for 'tc' traffic control
userspace tool and its flower filter. For this is required to use
the VCAP library.
Currently supported flower filter keys and actions are:
- source and destination MAC address keys
- trap action
====================
Link: https://lore.kernel.org/r/20221125095010.124458-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On lan966x the layout of the vcap memory is different than on sparx5.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement vcap_operations and enable default port keyset configuration
for each port. Now it is possible actually write/read/move entries in
the VCAP.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend matchall with action goto. This is needed to enable the lookup in
the VCAP. It is needed to connect chain 0 to a chain that is recognized
by the HW.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the only supported action is ACTION_TRAP and the only
dissector is ETH_ADDRS. Others will be added in future patches.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add registers used to access vcap controller.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This provides the lan966x is2 model and adds it to the vcap control
instance that will be provided to the vcap API.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When lan966x driver is initialized, initialize also the VCAP module for
lan966x.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the keysets, keys, actionsets and actions used by lan966x in IS2.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently there are 2 files that contain the keyfields, keys,
actionfields and actions. First file is used by the kunit while the
second one is used by VCAP api.
The header file that is used by kunit is just a super set of the of the
header file used by VCAP api.
Therefore not to have duplicate information in different files which is
also harder to maintain, create a single file that is used both by API
and by kunit.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simplify a bit the code by using regmap_set_bits() and
regmap_clear_bits() instead of regmap_update_bits() when possible.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The MACH_INGENIC Kconfig option will be selected when building a kernel
targeting Ingenic SoCs, but also when compiling a generic MIPS kernel
that happens to support Ingenic SoCs.
Therefore, if MACH_INGENIC is not set, we know that we're not even
trying to build a generic kernel that supports these SoCs, and we can
hide the options to compile the SoC-specific drivers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Ingenic SoCs all require CONFIG_OF, so there is no case where we want to
use this driver without CONFIG_OF.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add missing "reg = <0>;" property to the flash@0 node in the example.
Fixes: dd71cd4dd6 ("spi: Add Nuvoton WPCM450 Flash Interface Unit (FIU) bindings")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221129102225.3598044-3-j.neuschaefer@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The nuvoton,wpcm450-fiu binding's example includes
nuvoton,wpcm450-clk.h, which has not been merged yet,
thus causing a dt_binding_check error on -next.
Fix this error by simply hardcoding the clock index in the example,
before the breakage spreads any further.
Fixes: dd71cd4dd6 ("spi: Add Nuvoton WPCM450 Flash Interface Unit (FIU) bindings")
Reported-by: Rob Herring <robh@kernel.org>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221129102225.3598044-2-j.neuschaefer@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
sc7180_lpass_dev_resume() logs an error if clk_bulk_prepare_enable()
fails. The clock framework already generates error logs if anything
goes wrong, so the logging in _resume() is redundant, drop it.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20221129001633.v2.1.I8d1993f41f0da1eac0ecba321678ac489f9c0b9b@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Update lpass sc7280 platform driver with PM ops, such as
system supend and resume callbacks.
This update is required to disable clocks during supend and
avoid XO shutdown issue.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Rahul Ajmeriya <quic_rajmeriy@quicinc.com>
Link: https://lore.kernel.org/r/1669703784-27589-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
syzbot reported use-after-free in tun_detach() [1]. This causes call
trace like below:
==================================================================
BUG: KASAN: use-after-free in notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75
Read of size 8 at addr ffff88807324e2a8 by task syz-executor.0/3673
CPU: 0 PID: 3673 Comm: syz-executor.0 Not tainted 6.1.0-rc5-syzkaller-00044-gcc675d22e422 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x15e/0x461 mm/kasan/report.c:395
kasan_report+0xbf/0x1f0 mm/kasan/report.c:495
notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75
call_netdevice_notifiers_info+0x86/0x130 net/core/dev.c:1942
call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
call_netdevice_notifiers net/core/dev.c:1997 [inline]
netdev_wait_allrefs_any net/core/dev.c:10237 [inline]
netdev_run_todo+0xbc6/0x1100 net/core/dev.c:10351
tun_detach drivers/net/tun.c:704 [inline]
tun_chr_close+0xe4/0x190 drivers/net/tun.c:3467
__fput+0x27c/0xa90 fs/file_table.c:320
task_work_run+0x16f/0x270 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xb3d/0x2a30 kernel/exit.c:820
do_group_exit+0xd4/0x2a0 kernel/exit.c:950
get_signal+0x21b1/0x2440 kernel/signal.c:2858
arch_do_signal_or_restart+0x86/0x2300 arch/x86/kernel/signal.c:869
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The cause of the issue is that sock_put() from __tun_detach() drops
last reference count for struct net, and then notifier_call_chain()
from netdev_state_change() accesses that struct net.
This patch fixes the issue by calling sock_put() from tun_detach()
after all necessary accesses for the struct net has done.
Fixes: 83c1f36f98 ("tun: send netlink notification when the device is modified")
Reported-by: syzbot+106f9b687cd64ee70cd1@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=96eb7f1ce75ef933697f24eeab928c4a716edefe [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20221124175134.1589053-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first
supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP
and station; WCN7850 supports only station mode. Monitor mode is not
(yet) supported. Only PCI bus devices are supported.
ath12k is forked from an earlier version of ath11k. It was simpler to
have a "clean start" for the new generation and not try to share the
code with ath11k. This makes maintenance easier and avoids major
changes in ath11k, which would have significantly increased the risk
of regressions in existing setups.
ath12k uses le32 and cpu_to_le32() macros to handle endian
conversions, instead of using the firmware byte swap feature utilized
by ath11k. There is only one kernel module, named ath12k.ko.
Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but
work is ongoing to add EHT mode (IEEE 802.11be) support.
The size of the driver is ~41 kLOC and 45 files. To make the review
easier, this initial version of ath12k does not support Device Tree,
debugfs or any other extra features. Those will be added later, after
ath12k is accepted to upstream.
The driver is build tested by Intel's kernel test robot with both GCC
and Clang. Sparse reports no warnings. The driver is mostly free of
checkpatch warnings, albeit few of the warnings are omitted on
purpose, list of them here:
https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52
The driver has had multiple authors who are listed in alphabetical
order below.
Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com>
Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com>
Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com>
Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com>
Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Co-developed-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Co-developed-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com>
Co-developed-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Lorenzo Bianconi says:
====================
refactor mtk_wed code to introduce SER support
Refactor mtk_wed support in order to introduce proper integration for hw reset
between mtk_eth_soc/mtk_wed and mt76 drivers.
====================
Link: https://lore.kernel.org/r/cover.1669303154.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce reset parameter to mtk_wed_tx_ring_setup signature.
This is a preliminary patch to add Wireless Ethernet Dispatcher reset
support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce mtk_wed_rx_reset routine in order to reset rx DMA for Wireless
Ethernet Dispatcher available on MT7986 SoC.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update mtk_wed_stop routine and rename old mtk_wed_stop() to
mtk_wed_deinit(). This is a preliminary patch to add Wireless Ethernet
Dispatcher reset support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove duplicated code. Increase poll timeout to 10ms in order to be
aligned with vendor sdk.
This is a preliminary patch to add Wireless Ethernet Dispatcher reset
support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move MTK_WDMA_RESET_IDX configuration in mtk_wdma_rx_reset routine.
Increase poll timeout to 10ms in order to be aligned with vendor sdk.
This is a preliminary patch to add Wireless Ethernet Dispatcher reset
support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In ARM, the mapping of instruction memory is always little-endian, except
some BE-32 supported ARM architectures. Such as ARMv7-R, its instruction
endianness may be BE-32. Of course, its data endianness will also be BE-32
mode. Due to two negatives make a positive, the instruction stored in the
register after reading is in little-endian format. But for the case of
BE-8, the instruction endianness is LE, the instruction stored in the
register after reading is in big-endian format, which is inconsistent
with the disassembled one.
For example:
The content of disassembly:
c0429ee8: e3500000 cmp r0, #0
c0429eec: 159f2044 ldrne r2, [pc, #68]
c0429ef0: 108f2002 addne r2, pc, r2
c0429ef4: 1882000a stmne r2, {r1, r3}
c0429ef8: e7f000f0 udf #0
The output of undefined instruction exception:
Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
... ...
Code: 000050e3 44209f15 02208f10 0a008218 (f000f0e7)
This inconveniences the checking of instructions. What's worse is that,
for somebody who don't know about this, might think the instructions are
all broken.
So, when CONFIG_CPU_ENDIAN_BE8=y, let's convert the instructions to
little-endian format before they are printed. The conversion result is
as follows:
Code: e3500000 159f2044 108f2002 1882000a (e7f000f0)
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Miquel Raynal says:
====================
Marvell nvmem mac addresses support
Now that we are aligned on how to make information available from static
storage media to drivers like Ethernet controller drivers or switch
drivers by using nvmem cells and going through the whole nvmem
infrastructure, here are two driver updates to reflect these changes.
Prior to the driver updates, I propose:
* Reverting binding changes which should have never been accepted like
that.
* A conversion of the (old) Prestera and DFX server bindings (optional,
can be dropped if not considered necessary).
* A better description of the more recent Prestera PCI switch.
Please mind that this series cannot break anything since retrieving the
MAC address Prestera driver has never worked upstream, because the (ONIE
tlv) driver supposed to export the MAC address has not been accepted in
its original form and has been updated to the nvmem-layout
infrastructure (bindings have been merged, the code remains to be
applied).
====================
Link: https://lore.kernel.org/r/20221124111556.264647-1-miquel.raynal@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ONIE standard describes the organization of tlv (type-length-value)
arrays commonly stored within NVMEM devices on common networking
hardware.
Several drivers already make use of NVMEM cells for purposes like
retrieving a default MAC address provided by the manufacturer.
What made ONIE tables unusable so far was the fact that the information
where "dynamically" located within the table depending on the
manufacturer wishes, while Linux NVMEM support only allowed statically
defined NVMEM cells. Fortunately, this limitation was eventually tackled
with the introduction of discoverable cells through the use of NVMEM
layouts, making it possible to extract and consistently use the content
of tables like ONIE's tlv arrays.
Parsing this table at runtime in order to get various information is now
possible. So, because many Marvell networking switches already follow
this standard, let's consider using NVMEM cells as a new valid source of
information when looking for a base MAC address, which is one of the
primary uses of these new fields. Indeed, manufacturers following the
ONIE standard are encouraged to provide a default MAC address there, so
let's eventually use it if no other MAC address has been found using the
existing methods.
Link: https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This driver fist makes an expensive DT lookup to retrieve its DT node
(this is a PCI driver) in order to later search for the
base-mac-provider property. This property has no reality upstream and
this code should not have been accepted like this in the first
place. Instead, there is a proper nvmem interface that should be
used. Let's avoid these extra lookups and rely on the nvmem internal
logic.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
