Silence the following warnings when built with W=1:
| CC drivers/acpi/acpi_processor.c
| warning: no previous prototype for 'arch_register_cpu' [-Wmissing-prototypes]
| int __weak arch_register_cpu(int cpu)
| ^
| CC drivers/acpi/acpi_processor.c
| warning: no previous prototype for 'arch_unregister_cpu' [-Wmissing-prototypes]
| void __weak arch_unregister_cpu(int cpu) {}
| ^
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Silence the following warnings when built with W=1:
| CC drivers/acpi/processor_idle.c
| warning: no previous prototype for 'acpi_processor_ffh_lpi_probe' [-Wmissing-prototypes]
| int __weak acpi_processor_ffh_lpi_probe(unsigned int cpu)
| ^
| CC drivers/acpi/processor_idle.c
| warning: no previous prototype for 'acpi_processor_ffh_lpi_enter' [-Wmissing-prototypes]
| int __weak acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi)
| ^
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Zynq:
- Yang's change Switch to use dev_err_probe() helper
Lattice:
- Ivan's change add support for Lattice Sysconfig FPGA reprogrammer
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCY3Od2BMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIzaxEsBALXvny61hdQExwrlo0E27x30udYItQ6k
VI6rH6wJFO1mAP9Oims7qmS0hBWdMb88I1mUYqkYA+kA0qSUbFFl4cTVCg==
=yxAg
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.2-rc1
Zynq:
- Yang's change Switch to use dev_err_probe() helper
Lattice:
- Ivan's change add support for Lattice Sysconfig FPGA reprogrammer
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
dt-bindings: fpga: document Lattice sysCONFIG FPGA manager
fpga: lattice-sysconfig-spi: add Lattice sysCONFIG FPGA manager
fpga: zynq: Switch to use dev_err_probe() helper
Silence the following warning when built with W=1:
| CC drivers/acpi/device_pm.c
| warning: no previous prototype for function 'acpi_subsys_restore_early' [-Wmissing-prototypes]
| int acpi_subsys_restore_early(struct device *dev)
| ^
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Seems the blank line to separate entries in Kconfig was missing.
Add it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221122133600.49897-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the fwnode_property_match_string() the goto label out has
an additional task. Rename the label to be more precise on
what is going to happen if goto it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221122133600.49897-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Let's order ARRAY and non-ARRAY macros in the same way. The
PROPERTY_ENTRY_BOOL() is special, move it a bit down in the
code so it won't break ordering of the rest.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221122133600.49897-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
First of all, _ELEMENT_SIZE() repeats existing sizeof_field() macro.
Second, usage of _ARRAY_ELSIZE_LEN() adds unnecessary indirection
to the data layout. It's more understandable when the data structure
is placed explicitly. That said, get rid of those macros by replacing
them with the existing helper and explicit data structure layout.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221122133600.49897-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Silence the following warnings when make W=1:
| CC drivers/acpi/apei/apei-base.c
| warning: no previous prototype for 'arch_apei_enable_cmcff' [-Wmissing-prototypes]
| int __weak arch_apei_enable_cmcff(struct acpi_hest_header *hest_hdr,
| ^
| CC drivers/acpi/apei/apei-base.c
| warning: no previous prototype for 'arch_apei_report_mem_error' [-Wmissing-prototypes]
| void __weak arch_apei_report_mem_error(int sev,
| ^
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Silence the following warnings when built with W=1:
| CC drivers/acpi/acpi_ffh.c
| warning: no previous prototype for 'acpi_ffh_address_space_arch_setup' [-Wmissing-prototypes]
| int __weak acpi_ffh_address_space_arch_setup(void *handler_ctxt,
| ^
| CC drivers/acpi/acpi_ffh.c
| warning: no previous prototype for 'acpi_ffh_address_space_arch_handler' [-Wmissing-prototypes]
| int __weak acpi_ffh_address_space_arch_handler(acpi_integer *value,
| ^
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bail out if we extract the _FIF package failed, or we will end
of referencing the garbage information in fields[], the fan control
will be in mess, fix it.
Fiexes: d445571fa3 ("ACPI: fan: Optimize struct acpi_fan_fif")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The type of a->key[0] is char in fscache_volume_same(). If the length
of cache volume key is greater than 127, the value of a->key[0] is less
than 0. In this case, klen becomes much larger than 255 after type
conversion, because the type of klen is size_t. As a result, memcmp()
is read out of bounds.
This causes a slab-out-of-bounds Read in __fscache_acquire_volume(), as
reported by Syzbot.
Fix this by changing the type of the stored key to "u8 *" rather than
"char *" (it isn't a simple string anyway). Also put in a check that
the volume name doesn't exceed NAME_MAX.
BUG: KASAN: slab-out-of-bounds in memcmp+0x16f/0x1c0 lib/string.c:757
Read of size 8 at addr ffff888016f3aa90 by task syz-executor344/3613
Call Trace:
memcmp+0x16f/0x1c0 lib/string.c:757
memcmp include/linux/fortify-string.h:420 [inline]
fscache_volume_same fs/fscache/volume.c:133 [inline]
fscache_hash_volume fs/fscache/volume.c:171 [inline]
__fscache_acquire_volume+0x76c/0x1080 fs/fscache/volume.c:328
fscache_acquire_volume include/linux/fscache.h:204 [inline]
v9fs_cache_session_get_cookie+0x143/0x240 fs/9p/cache.c:34
v9fs_session_init+0x1166/0x1810 fs/9p/v9fs.c:473
v9fs_mount+0xba/0xc90 fs/9p/vfs_super.c:126
legacy_get_tree+0x105/0x220 fs/fs_context.c:610
vfs_get_tree+0x89/0x2f0 fs/super.c:1530
do_new_mount fs/namespace.c:3040 [inline]
path_mount+0x1326/0x1e20 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3568
Fixes: 62ab633523 ("fscache: Implement volume registration")
Reported-by: syzbot+a76f6a6e524cf2080aa3@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Zhang Peng <zhangpeng362@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs-developer@lists.sourceforge.net
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/Y3OH+Dmi0QIOK18n@codewreck.org/ # Zhang Peng's v1 fix
Link: https://lore.kernel.org/r/20221115140447.2971680-1-zhangpeng362@huawei.com/ # Zhang Peng's v2 fix
Link: https://lore.kernel.org/r/166869954095.3793579.8500020902371015443.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kernel-doc warnings. Many of these are about a function's
return value, so use the kernel-doc Return: format to fix those
Use % prefix on numeric constant values.
dir.c: fix typos/spellos
file.c fix typo: s/taret/target/
Fix all of these kernel-doc warnings:
dir.c:305: warning: missing initial short description on line:
* kernfs_name_hash
dir.c:137: warning: No description found for return value of 'kernfs_path_from_node_locked'
dir.c:196: warning: No description found for return value of 'kernfs_name'
dir.c:224: warning: No description found for return value of 'kernfs_path_from_node'
dir.c:292: warning: No description found for return value of 'kernfs_get_parent'
dir.c:312: warning: No description found for return value of 'kernfs_name_hash'
dir.c:404: warning: No description found for return value of 'kernfs_unlink_sibling'
dir.c:588: warning: No description found for return value of 'kernfs_node_from_dentry'
dir.c:806: warning: No description found for return value of 'kernfs_find_ns'
dir.c:879: warning: No description found for return value of 'kernfs_find_and_get_ns'
dir.c:904: warning: No description found for return value of 'kernfs_walk_and_get_ns'
dir.c:927: warning: No description found for return value of 'kernfs_create_root'
dir.c:996: warning: No description found for return value of 'kernfs_root_to_node'
dir.c:1016: warning: No description found for return value of 'kernfs_create_dir_ns'
dir.c:1048: warning: No description found for return value of 'kernfs_create_empty_dir'
dir.c:1306: warning: No description found for return value of 'kernfs_next_descendant_post'
dir.c:1568: warning: No description found for return value of 'kernfs_remove_self'
dir.c:1630: warning: No description found for return value of 'kernfs_remove_by_name_ns'
dir.c:1667: warning: No description found for return value of 'kernfs_rename_ns'
file.c:66: warning: No description found for return value of 'of_on'
file.c:88: warning: No description found for return value of 'kernfs_deref_open_node_locked'
file.c:1036: warning: No description found for return value of '__kernfs_create_file'
inode.c💯 warning: No description found for return value of 'kernfs_setattr'
mount.c:160: warning: No description found for return value of 'kernfs_root_from_sb'
mount.c:198: warning: No description found for return value of 'kernfs_node_dentry'
mount.c:302: warning: No description found for return value of 'kernfs_super_ns'
mount.c:318: warning: No description found for return value of 'kernfs_get_tree'
symlink.c:28: warning: No description found for return value of 'kernfs_create_link'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221112031456.22980-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
acpi_evaluate_dsm_typed()/acpi_evaluate_dsm() should be coupled with
ACPI_FREE() to free the ACPI memory, because we need to track the
allocation of acpi_object when ACPI_DBG_TRACK_ALLOCATIONS enabled,
so use ACPI_FREE() instead of kfree().
Fixes: 0db89fa243 ("ACPI: Introduce Platform Firmware Runtime Update device driver")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_evaluate_dsm_typed()/acpi_evaluate_dsm() should be coupled
with ACPI_FREE() to free the ACPI memory, because we need to
track the allocation of acpi_object when ACPI_DBG_TRACK_ALLOCATIONS
enabled, so use ACPI_FREE() instead of kfree().
Fixes: b0013e037a ("ACPI: Introduce Platform Firmware Runtime Telemetry driver")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For bus-based driver, device removal is implemented as:
1 device_remove()->
2 bus->remove()->
3 driver->remove()
Driver core needs no inform from callee(bus driver) about the
result of remove callback. In that case, commit fc7a6209d5
("bus: Make remove callback return void") forces bus_type::remove
be void-returned.
Now we have the situation that both 1 & 2 of calling chain are
void-returned, so it does not make much sense for 3(driver->remove)
to return non-void to its caller.
So the basic idea behind this change is making remove() callback of
any bus-based driver to be void-returned.
This change, for itself, is for device drivers based on acpi-bus.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for drivers/platform/surface/*
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, 'pcc_chan_count' is remains set to a non-zero value if PCC
subspaces are parsed successfully but something else fail later during
the initial PCC probing phase. This will result in pcc_mbox_request_channel
trying to access the resources that are not initialised or allocated and
may end up in a system crash.
Reset pcc_chan_count to 0 when the PCC probe fails in order to prevent
the possible issue as described above.
Fixes: ce028702dd ("mailbox: pcc: Move bulk of PCCT parsing into pcc_mbox_probe")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, PCC OpRegion handler depends on the availability of platform
interrupt to be functional currently. If it is not available, the OpRegion
can't be executed successfully or the desired outcome won't be possible.
So let's reject setting up the PCC OpRegion handler on the platform if
it doesn't support or have platform interrupt available.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Allow the compiler to verify consistency of function declarations and
function definitions. This patch fixes the following sparse errors:
block/blk-crypto-profile.c:241:14: error: no previous prototype for ‘blk_crypto_get_keyslot’ [-Werror=missing-prototypes]
241 | blk_status_t blk_crypto_get_keyslot(struct blk_crypto_profile *profile,
| ^~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:318:6: error: no previous prototype for ‘blk_crypto_put_keyslot’ [-Werror=missing-prototypes]
318 | void blk_crypto_put_keyslot(struct blk_crypto_keyslot *slot)
| ^~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:344:6: error: no previous prototype for ‘__blk_crypto_cfg_supported’ [-Werror=missing-prototypes]
344 | bool __blk_crypto_cfg_supported(struct blk_crypto_profile *profile,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:373:5: error: no previous prototype for ‘__blk_crypto_evict_key’ [-Werror=missing-prototypes]
373 | int __blk_crypto_evict_key(struct blk_crypto_profile *profile,
| ^~~~~~~~~~~~~~~~~~~~~~
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221123172923.434339-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dasd_copy_relation->entry[] array might be accessed out of bounds if the
loop does not break.
Fixes: a91ff09d39 ("s390/dasd: add copy pair setup")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20221123160719.3002694-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For DASD devices in raw_track_access mode only full track images are
read and written.
For this purpose it is not necessary to do search operation in the
locate record extended function. The documentation even states that
this might fail if the searched record is not found on a track.
Currently the driver sets a value of 1 in the search field for the first
record after record zero. This is the default for disks not in
raw_track_access mode but record 1 might be missing on a completely
empty track.
There has not been any problem with this on IBM storage servers but it
might lead to errors with DASD devices on other vendors storage servers.
Fix this by setting the search field to 0. Record zero is always available
even on a completely empty track.
Fixes: e4dbb0f2b5 ("[S390] dasd: Add support for raw ECKD access.")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20221123160719.3002694-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
32 byte are to less for important data from prefix or
other commands.
Print up to 128 byte data. This is enough for the largest
CCW data we have.
Since printk can only print up to 1024 byte at once, print the
different parts of the CCW dumps separately.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20221123160719.3002694-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-for-Backlight-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-566-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-for-Backlight-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-565-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Matti Vaittinen <mazziesaccount@gmail.com>:
Minor (printing) improvements for ROHM regulator drivers.
This series:
- Drops an unnecessary info print from bd718x7.
(Added a fixes tag for this but not really sure if worth
adding to stable)
- Convert the ROHM BDxxxxx PMIC regulator drivers to use dev_err_probe().
- Change the probe logic for bd718x7 to favor the more usual devm-style
where errors are returned immediately.
Use epf_db[i] dereference instead of readl() because epf_db is
in memory allocated by dma_alloc_coherent(), not I/O.
Remove useless/duplicated readl() in the process.
Link: https://lore.kernel.org/r/20221102141014.1025893-7-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Functions that update cs_dsp controls need to handle return codes that
indicate whether the control value changed. A return code of 1 indicates
a change, 0 indicates no-change and a negative value is an error
condition.
Acked controls implicitly change value when written so a successful
write shall always report that the value changed.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165811.3014472-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA callers need to know whether there was a change to the value so
that they can report a control write change correctly.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165811.3014472-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 72adf2421d ("ice: Move common functions out of ice_main.c part
2/7") moved an older version of ice_setup_rx_ctx() function with
usage of magic number 7.
Reimplement the commit 5ab522443b ("ice: Cleanup magic number") to use
ICE_RLAN_BASE_S instead of magic number.
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently the VIRTCHNL_OP_CONFIG_VSI_QUEUES command may fail if there are
less RX queues than TX queues requested.
To fix it, only configure RXDID if RX queue exists.
Fixes: e753df8fbc ("ice: Add support Flex RXD")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Resets may occur with or without user interaction. For example, a TX hang
or reconfiguration of parameters will result in a reset. During reset, the
VSI is freed, freeing any statistics structures inside as well. This would
create an issue for the user where a reset happens in the background,
statistics set to zero, and the user checks ring statistics expecting them
to be populated.
To ensure this doesn't happen, accumulate ring statistics over reset.
Define a new ring statistics structure, ice_ring_stats. The new structure
lives in the VSI's parent, preserving ring statistics when VSI is freed.
1. Define a new structure vsi_ring_stats in the PF scope
2. Allocate/free stats only during probe, unload, or change in ring size
3. Replace previous ring statistics functionality with new structure
Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Resets happen with or without user interaction. For example, incidents
such as TX hang or a reconfiguration of parameters will result in a reset.
During reset, hardware and software statistics were set to zero. This
created an issue for the user where a reset happens in the background,
statistics set to zero, and the user checks statistics expecting them to
be populated.
To ensure this doesn't happen, keep accumulating stats over reset.
1. Remove function calls which reset hardware and netdev statistics.
2. Do not rollover statistics in ice_stat_update40 during reset.
Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The driver is currently using ICE_LINK_SPEED_* defines that mirror what
ethtool.h defines, with one exception ICE_LINK_SPEED_UNKNOWN.
This issue is fixed by the following changes:
1. replace ICE_LINK_SPEED_UNKNOWN with 0 because SPEED_UNKNOWN in
ethtool.h is "-1" and that doesn't match the driver's expected behavior
2. transform ICE_LINK_SPEED_*MBPS to SPEED_* using static tables and
fls()-1 to convert from BIT() to an index in a table.
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It was observed that PTP HW semaphore can be held for ~50 ms in worst
case.
SW should wait longer and check more frequently if the HW lock is held.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Engine busyness samples around a 10ms period is failing with busyness
ranging approx. from 87% to 115% as shown below. The expected range is
+/- 5% of the sample period. Fail 10% of the time.
rcs0: reported 11716042ns [91%] busyness while spinning [for 12805719ns]
When determining busyness of active engine, the GuC based engine
busyness implementation relies on a 64 bit timestamp register read. The
latency incurred by this register read causes the failure.
On DG1, when the test fails, the observed latencies range from 900us -
1.5ms.
Optimizing the 2x32 read by acquiring the lock and forcewake prior to
all reg reads reduces the rate of failure to around 2%, but does not
eliminate it.
In order to make the selftest more robust and always account for such
latencies, increase the sample period to 100 ms. This eliminates the
issue as seen in a 1000 runs.
v2: (Ashutosh)
- Add error to commit msg
- Include gitlab bug
- Update commit for inclusion of 2x32 optimized read
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4418
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110171913.670286-3-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 529d95a606)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
PMU reads the GT timestamp as a 2x32 mmio read and since upper and lower
32 bit registers are read in a loop, there is a latency involved between
getting the GT timestamp and the CPU timestamp. As part of the
resolution, refactor intel_uncore_read64_2x32 to acquire forcewake and
uncore lock prior to reading upper and lower regs.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110171913.670286-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit e746f84b8e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In e100_xmit_prepare(), if we can't map the skb, then return -ENOMEM, so
e100_xmit_frame() will return NETDEV_TX_BUSY and the upper layer will
resend the skb. But the skb is already freed, which will cause UAF bug
when the upper layer resends the skb.
Remove the harmful free.
Fixes: 5e5d49422d ("e100: Release skb when DMA mapping is failed in e100_xmit_prepare")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The default_lists array should be in rodata.
Fixes: dce2bd5423 ("drm/i915/guc: Add Gen9 registers for GuC error state capture.")
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122141616.3469214-1-jani.nikula@intel.com
(cherry picked from commit 8b7f7a9b10)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
bigjoiner_pipes() doesn't consider that:
- RKL only has three pipes
- some pipes may be fused off
This means that intel_atomic_check_bigjoiner() won't reject
all configurations that would need a non-existent pipe.
Instead we just keep on rolling witout actually having
reserved the slave pipe we need.
It's possible that we don't outright explode anywhere due to
this since eg. for_each_intel_crtc_in_pipe_mask() will only
walk the crtcs we've registered even though the passed in
pipe_mask asks for more of them. But clearly the thing won't
do what is expected of it when the required pipes are not
present.
Fix the problem by consulting the device info pipe_mask already
in bigjoiner_pipes().
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118185201.10469-1-ville.syrjala@linux.intel.com
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
(cherry picked from commit f1c87a94a1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
