[Description]
- For SubVP, we cannot support HW cursor if it's
greater than 64 x 64 x 4 bytes in size
- However, on certain config changes (i.e. pixel format)
we can exit SubVP (then change to HW cursor) then re-enter
SubVP without changing back to SW cursor because there is
no SetCursorAttributes call
- To workaround this issue, limit the HW cursor size to be
less than 64 x 64 x 4 bytes whenever the stream is >= 4K
- Also ensure this W/A only affects DCN that supports SubVP
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
First MST sideband message returns AUX_RET_ERROR_HPD_DISCON
on certain intel platform. Aux transaction considered failure
if HPD unexpected pulled low. The actual aux transaction success
in such case, hence do not return error.
[how]
Not returning error when AUX_RET_ERROR_HPD_DISCON detected
on the first sideband message.
v2: squash in fix (Alex)
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Tsung-hua Lin <Tsung-hua.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Add margin for HUBP "jitter" for SubVp + DRR case
- Also do a min transition even if MPO is added on a
non SubVP pipe (i.e. added on DRR pipe for SubVP + DRR)
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add configuration 2 for ABM 2.3/2.4 to suit customer preferences, which
is to lower the brightness curves in 80%-100% range compared to the
existing default config 0.
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's been a very long running bug that seems to have been neglected for
a while, where amdgpu consistently triggers a KASAN error at start:
BUG: KASAN: global-out-of-bounds in read_indirect_azalia_reg+0x1d4/0x2a0 [amdgpu]
Read of size 4 at addr ffffffffc2274b28 by task modprobe/1889
After digging through amd's rather creative method for accessing registers,
I eventually discovered the problem likely has to do with the fact that on
my dce120 GPU there are supposedly 7 sets of audio registers. But we only
define a register mapping for 6 sets.
So, fix this and fix the KASAN warning finally.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().
So before returning from amdgpu_device_resume|suspend_display_audio(),
pci_dev_put() is called to avoid refcount leak.
Fixes: 3f12acc8d6 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can reuse the same buffers on resume.
v2: squash in S4 fix from Shikai
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2213
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Coverity noticed this one, so let's fix it.
Fixes: 7cce4cd628 ("drm/amdgpu/mst: Stop ignoring error codes and deadlocking")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org # v5.6+
If mes enabled, reserve VM invalidation engine 5 for firmware.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is used to fix following compilation issue with legacy gcc
error: ‘for’ loop initial declarations are only allowed in C99 mode
for (int i = flag_vlevel; i < context->bw_ctx.dml.soc.num_states; i++) {
Signed-off-by: Bob zhou <bobzhou2@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hl_encaps_handle_do_release_sob() can be called only when the last
reference to the context object is released and hl_ctx_do_release() is
initiated, and therefore it shouldn't call hl_ctx_put().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Failing to kill a user process during a hard reset can be due to a
reference to the user context which isn't released.
To make it easier to understand if this the reason for the failure and
not something else, add a print of the context refcount value.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is similar to RMWREG32, but the given 'val' is already shifted
according to the mask.
This allows several 'ORed' vals and masks to be set at once
The patch also fixes wrong usage of RMWREG32 by replacing
it with RMWREG32_SHIFTED
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When the new CPUCP opcodes are not supported and a CPUCP packet fails,
the return value is the F/W error resposone which is a positive value.
If this packet is sent from IOCTL and the positive value is used, the
ICOTL will not be considered as unsuccessful.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The auxdevice layer is completely generic, it should be split from
intel.c which is only geared to the 'cnl' hw_ops now.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111013135.38289-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
No functionality change, only add indirection for link power
management helpers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111013135.38289-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Before introducing new hardware with completely different register
spaces and programming sequences, we need to abstract some of the
existing routines in hw_ops that will be platform-specific. For now we
only use the 'cnl' ops - after the first Intel platform with SoundWire
capabilities.
Rather than one big intrusive patch, hw_ops are introduced in this
patch so show the dependencies between drivers. Follow-up patches will
introduce callbacks for debugfs, power and bus management.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221111013135.38289-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The clang-analyzer reported a warning: "Value stored to
'cq_size_addr' is never read".
The cq_size register of dcore0 is not being zeroed using
gaudi2_memset_device_lbw(), along with the other cq_* registers,
even though the corresponding cq_size_addr variable is set.
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-for-Backlight-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-560-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-for-Backlight-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-558-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-for-Backlight-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-552-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-for-Backlight-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-550-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-for-Backlight-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-547-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-for-Backlight-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-545-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-for-Backlight-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-540-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The clang-analyzer reported a warning: "Value stored to 'rc' is never
read".
The return value check for the first hl_fw_dynamic_send_clear_cmd() call
in hl_fw_dynamic_send_protocol_cmd() appears to be missing.
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Increase the size of the busy engines mask in 'struct hl_info_hw_idle',
for future ASICs with more than 128 engines.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently the scrubbing mechanism used the EDMA engines by directly
setting the engine core registers to scrub a chunk of memory.
Due to a sporadic failure with this mechanism, it was decided to
initiate the engines via its QMAN using LIN-DMA packets.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Processes that use our device are likely to use at the same time other
devices such as remote storage.
In case our device is removed and a user process is still using the
device, we need to kill the user process. However, if that process
has a thread waiting for i/o to complete on remote storage, for example,
the process won't terminate.
Let's give it enough time to terminate before giving up.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
schedule_hard_reset can be true only if we didn't do hard-reset.
Therefore, no point of checking it in case hard_reset is true.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
If the device file is released while a context is still held, it won't
be possible to reopen it until the context is eventually released.
If that doesn't happen, only a device reset will revert it back to an
operational state, i.e. need to wait for a CS timeout or an error, or to
wait for an external intervention of injecting a reset via sysfs.
At this stage, after the device was released by user, context is held
either because of CS which were left running on the device and are not
relevant anymore, or due to missing cleanup steps from user side.
All of this is in any case handled in the device reset flow, so initiate
the reset at this point instead of waiting for it.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to a H/W issue in the LBW path to the PCIE_DBI MSI-X doorbell, there
were false sporadic error responses in SM when it was configured to
write to there, and hence no reset was done as part of handling the
relevant event.
Now that the virtual MSI-X doorbell is used, such errors in SM are not
expected and reset shouldn't be skipped.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User should use the virtual MSI-X doorbell to generate interrupts from
the device, so there is no need to enable entries in the MSIX_GW table.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Firmware 1.7 is the first official firmware, so no need to check
if we are running a version below it.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add missing le32_to_cpu() conversions, and use %d for the value
returned from atomic_read().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Each time page fault happens, besides capturing its data, also notify
the user about it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As power and thermal envelope events are pure informative and not
indicating an error, we reduce the print level to info only.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Some ASICs haven't yet implemented this functionality and so the
ioctl call should fail and the user should be notified of the reason.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is needed to allow adding more data to the lkd_fw_comms_desc
structure.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Each time razwi (read-only zero, write ignored) event happens, besides
capturing its data, also notify the user about it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to binning, Gaudi2 does not always support fp32.
We add support for such an event in case fp32 is used by the user
in such a device.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Each time page fault happens, besides capturing its data, also notify
the user about it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Creating event queue workqueue using alloc_workqueue made it run in
multi threaded mode, which caused parallel dumping of events as well as
parallel events notifying to user, causing logs with multiple
events to be out of order.
Fixed by creating event queue workqueue as single threaded work queue.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Each time razwi (read-only zero, write ignore) happens, besides
capturing its data, also notify the user about it.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
