The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-for-Backlight-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-548-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-for-Backlight-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-546-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-for-Backlight-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-544-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-for-MFD-by: Lee Jones <lee@kernel.org>
Acked-for-Backlight-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221118224540.619276-541-uwe@kleine-koenig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 1fa5ae857b ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
move dev_set_name() after pnp_add_id() to avoid memory leak.
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To improve performance and overall system stability, suspend/resume
operations for ASoC cards always return success status and defer the
actual work.
Because of that, if a substream fails to resume, userspace may still
attempt to invoke commands on it as from their perspective the operation
completed successfully. Set substream's state to DISCONNECTED to ensure
no further commands are attempted.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221116115550.1100398-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_stop() shall be called with stream lock held to prevent any
races between nonatomic streaming operations.
Fixes: 2f1f570cd7 ("ASoC: Intel: avs: Coredump and recovery flow")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221116115550.1100398-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is reported that on some systems pciehp binds to an Upstream Port and
attempts to operate it which causes devices below the Port to disappear
from the bus.
This happens because acpiphp sets dev->is_hotplug_bridge for that Port
(after receiving a Device Check notification on it from the platform
firmware via ACPI) during the enumeration of PCI devices.
get_port_device_capability() sees that dev->is_hotplug_bridge is set and
adds PCIE_PORT_SERVICE_HP to Port services, which allows pciehp to bind to
the Port in question.
Even though this particular problem can be addressed by making the
portdrv_core checks more robust, it also causes power management to work
differently on the affected systems which generally is not desirable (PCIe
Ports with dev->is_hotplug_bridge set have to pass additional tests to be
allowed to go into the D3hot/cold power states which affects runtime PM of
devices below these Ports).
For this reason, amend check_hotplug_bridge() with a PCIe type check to
prevent it from setting dev->is_hotplug_bridge for Upstream Ports.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/2262230.ElGaqSPkdT@kreacher
Reported-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
It is reported that on some systems pciehp binds to an Upstream Port and
attempts to operate it which causes devices below the Port to disappear
from the bus.
This happens because acpiphp sets dev->is_hotplug_bridge for that Port
(after receiving a Device Check notification on it from the platform
firmware via ACPI) during the enumeration of PCI devices.
get_port_device_capability() sees that dev->is_hotplug_bridge is set and
adds PCIE_PORT_SERVICE_HP to Port services (which allows pciehp to bind to
the Port in question) without consulting the PCIe type, which should be
either Root Port or Downstream Port for the hotplug capability to be
present.
Per PCIe r6.0, sec 7.5.3.2, the Slot Implemented bit is only valid for
Downstream Ports (including Root Ports), and PCIe hotplug depends on the
Slot Capabilities / Control / Status registers.
Make get_port_device_capability() more robust by adding a PCIe type check
to it before adding PCIE_PORT_SERVICE_HP to Port services which helps to
avoid the problem.
[bhelgaas: add spec citation]
Suggested-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/4786090.31r3eYUQgx@kreacher
Reported-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Add a new amd pstate driver command line option to enable driver passive
working mode via MSR and shared memory interface to request desired
performance within abstract scale and the power management firmware
(SMU) convert the perf requests into actual hardware pstates.
Also the `disable` parameter can disable the pstate driver loading by
adding `amd_pstate=disable` to kernel command line.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce the `amd_pstate` driver new working mode with
`amd_pstate=passive` added to kernel command line.
If there is no passive mode enabled by user, amd_pstate driver will be
disabled by default for now.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When the amd_pstate driver is built-in users still need a method to be
able enable or disable it depending upon their circumstance.
Add support for an early parameter to do this.
There is some performance degradation on a number of ASICs in the
passive mode. This performance issue was originally discovered in
shared memory systems but it has been proven that certain workloads
on MSR systems also suffer performance issues.
Set the amd-pstate driver as disabled by default to temporarily
mitigate the performance problem.
1) with `amd_pstate=disable`, pstate driver will be disabled to load at
kernel booting.
2) with `amd_pstate=passive`, pstate driver will be enabled and loaded
as non-autonomous working mode supported in the low-level power
management firmware.
3) If neither parameter is specified, the driver will be disabled by
default to avoid triggering performance regressions in certain ASICs
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently when the amd-pstate and acpi_cpufreq are both built into
kernel as module driver, amd-pstate will not be loaded by default
in this case.
Change amd-pstate driver as built-in type, it will resolve the loading
sequence problem to allow user to make amd-pstate driver as the default
cpufreq scaling driver.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Fixes: ec437d71db ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
MSR_AMD_PERF_CTL is guaranteed to be 0 on a cold boot. However, on a
kexec boot, for instance, it may have a non-zero value (if the cpu was
in a non-P0 Pstate). In such cases, the cores with non-P0 Pstates at
boot will never be pushed to P0, let alone boost frequencies.
Kexec is a common workflow for reboot on Linux and this creates a
regression in performance. Fix it by explicitly setting the
MSR_AMD_PERF_CTL to 0 during amd_pstate driver init.
Cc: All applicable <stable@vger.kernel.org>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit 6d5afdc97e.
On a Pixel 6 device, it is observed that this commit increases
latency by approximately 50ms, or 20%, in migrating a task
that requires full CPU utilization from a LITTLE CPU to Fmax
on a big CPU. Reverting this change restores the latency back
to its original baseline value.
Fixes: 6d5afdc97e ("cpufreq: schedutil: Move max CPU capacity to sugov_policy")
Signed-off-by: Sam Wu <wusamuel@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cmpxchg_user_key() for byte and short values is implemented via a one word
cmpxchg loop. Give up trying to perform the cmpxchg if it fails too often
because of contention on the cache line. This ensures that the thread
cannot become stuck in the kernel.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Link: https://lore.kernel.org/r/20221117100745.3253896-1-scgl@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Some of the Communities may have PWM capability. In such cases,
enumerate the PWM device via respective driver. A user is still
responsible for setting correct pin muxing for the line that
needs to output the signal.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Move the implementation of efi32_pe_entry() into efi-mixed.S, which is a
more suitable location that only gets built if EFI mixed mode is
actually enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-7-ardb@kernel.org
Move the efi32_entry() routine out of head_64.S and into efi-mixed.S,
which reduces clutter in the complicated startup routines. It also
permits linkage of some symbols used by code to be made local.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-6-ardb@kernel.org
Move efi32_pe_entry() into the .text section, so that it can be moved
out of head_64.S and into a separate compilation unit in a subsequent
patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-5-ardb@kernel.org
KBL platform is missing the definition of 'max98357a' audio amplifier.
This amplifier is used on many KBL Chromebooks, for instance variant
'nami' of 'Google/poppy' baseboard.
Reported-by: CoolStar <coolstarorganization@gmail.com>
Signed-off-by: Alicja Michalska <ahplka19@gmail.com>
Link: https://lore.kernel.org/r/Y3wHyJ/EcsLRHGr3@tora
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the logic that chooses between the different EFI entrypoints out of
the 32-bit boot path, and into a 64-bit helper that can perform the same
task much more cleanly. While at it, document the mixed mode boot flow
in a code comment.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-4-ardb@kernel.org
Move the code that stores the arguments passed to the EFI entrypoint
into the .text section, so that it can be moved into a separate
compilation unit in a subsequent patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-3-ardb@kernel.org
In preparation for moving the mixed mode specific code out of head_64.S,
rename the existing file to clarify that it contains more than just the
mixed mode thunk.
While at it, clean up the Makefile rules that add it to the build.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20221122161017.2426828-2-ardb@kernel.org
The blamed commit introduced the following smatch warning in the
function lan9662_otp_wait_flag_clear:
drivers/nvmem/lan9662-otpc.c:43 lan9662_otp_wait_flag_clear() warn: signedness bug returning '(-110)'
Fix this by changing the return type of the function
lan9662_otp_wait_flag_clear() to be int instead of bool.
Fixes: 9e8f208ad5 ("nvmem: lan9662-otp: add support")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063840.6357-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of error, the function memremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: 5a3fa75a4d ("nvmem: Add driver to expose reserved memory as nvmem")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063840.6357-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This contains a tiny fix to align the driver compatible string in the
binding documentation with the one used in DTS.
- dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SZl8
-----END PGP SIGNATURE-----
Merge tag 'icc-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Georgi writes:
interconnect fix for v6.1-rc
This contains a tiny fix to align the driver compatible string in the
binding documentation with the one used in DTS.
- dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
Usual mixed bunch of driver fixes.
* sw-triggers
- Fix failure to cleanup up list registration in an error path.
* aspeed,adc
- Drop the trim valid dts property as it doesn't account for unprogrammed
OTP and that can be easily detected without it.
* avago,apds9960:
- Fix register address for gesture gain.
* bosch,bma400
- Fix a memory leak in an error path.
* rohm,rpr0521
- Fix missing dependency on IIO_BUFFER/IIO_TRIGGERED_BUFFER.
* ti,afe4403/4404
- Fix out of band read by moving reads down to where they are used.
-----BEGIN PGP SIGNATURE-----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=3kVB
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.1c' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
"3rd set of IIO fixes for the 6.1 cycle.
Usual mixed bunch of driver fixes.
* sw-triggers
- Fix failure to cleanup up list registration in an error path.
* aspeed,adc
- Drop the trim valid dts property as it doesn't account for unprogrammed
OTP and that can be easily detected without it.
* avago,apds9960:
- Fix register address for gesture gain.
* bosch,bma400
- Fix a memory leak in an error path.
* rohm,rpr0521
- Fix missing dependency on IIO_BUFFER/IIO_TRIGGERED_BUFFER.
* ti,afe4403/4404
- Fix out of band read by moving reads down to where they are
used."
* tag 'iio-fixes-for-6.1c' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
iio: adc: aspeed: Remove the trim valid dts property.
iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()
iio: light: rpr0521: add missing Kconfig dependencies
iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
iio: health: afe4403: Fix oob read in afe4403_read_raw
iio: light: apds9960: fix wrong register for gesture gain
Intel m10 bmc secure update
- Russ's change fixes Kconfig dependencies
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-6.1 branch)
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCY3T8PhMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIzaiMoBAOFCn6WZiafhcAxJRLzglfbcU3Znw55S
aR0RjU8YMimbAP49DYLnByGrxfOQJQx9YIM5A7tJfOOrAXa7zBEvoVHLBQ==
=L2O5
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-6.1-final' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into work-linus
Xu writes:
FPGA Manager changes for 6.1-final
Intel m10 bmc secure update
- Russ's change fixes Kconfig dependencies
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-6.1 branch)
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.1-final' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: m10bmc-sec: Fix kconfig dependencies
The Arizona and Madera codecs all have a datasheet name of "MICVDD"
for the regulator output. But future codecs with a regulator that
can be controlled by this driver have different naming convention
for the output of the regulator.
Move the setting of the supply name from arizona_micsupp_common_init()
to arizona_micsupp_probe() and madera_micsupp_probe().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221109165331.29332-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When Madera support was added to this driver the code was left
using ARIZONA_* defines. This wasn't causing any problem because
those defines just happened to have the same value as the
equivalent MADERA_* defines. But it is not ideal to assume this,
and future devices that can share this driver do not have the
same register map.
Fix the code to refer to the register data in struct regulator_desc.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221109165331.29332-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As comment of pci_get_slot() says, it returns a pci_device with its
refcount increased. The caller must decrement the reference count by
calling pci_dev_put().
Since 'dma_dev' is only used to filter the channel in filter(), we can
call pci_dev_put() before exiting from pch_request_dma(). Add the
missing pci_dev_put() for the normal and error path.
Fixes: 3c6a483275 ("Serial: EG20T: add PCH_UART driver")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221122114559.27692-1-wangxiongfeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pm_ptr() to remove the need to mark the pm functions as
__maybe_unused when the kernel is built without CONFIG_PM support.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20221110113859.8485-4-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LPUART supports both synchronous wakeup and asynchronous wakeup(wakeup
the system when the UART clocks are shut-off), the synchronous wakeup is
configured by UARTCTRL_RIE interrupt, and the asynchronous wakeup is
configured by UARTBAUD_RXEDGIE interrupt.
Add lpuart_uport_is_active() to determine if the uart port needs to get
into the suspend states, also add lpuart_suspend_noirq() and
lpuart_resume_noirq() to enable and disable the wakeup irq bits if the
uart port needs to be set as wakeup source.
When use lpuart with DMA mode, it still needs to switch to the cpu mode
in .suspend() that enable cpu interrupts RIE and RXEDGIE as wakeup
source, after system resume back, needs to setup DMA again, .resume()
will share the HW setup code with .startup(), so abstract the same code
to the api like lpuart32_hw_setup().
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20221110113859.8485-2-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Resent again, last attempt still altered the plain text.
Zhengchao Shao <shaozhengchao@huawei.com> identified by inspection bugs in the error path of hdlcdev_open() in synclink_gt.c
The function did not fully unwind actions in the error path. The use of try_module_get()/module_put() is unnecessary, potentially hazardous and is removed. The synclink_gt driver is already pinned any point the net device is registered, a requirement for calling this entry point.
The call hdlc_open() to init the generic HDLC layer is moved to after driver level init/checks and proper rollback of previous actions is added. This is a more sensible ordering as the most common error paths are at the driver level and the driver level rollbacks require less processing than hdlc_open()/hdlc_close().
This has been tested with supported hardware.
Signed-off-by:Paul Fulghum <paulkf@microgate.com>
Link: https://lore.kernel.org/r/7599F007-8985-4469-BE00-52BD1530210E@microgate.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If dma_request_chan() returns a PROBE_DEFER error, clk_disable_unprepare()
will be called and USART clock will be disabled. But early console can be
still active on the same USART.
While moving dma_request_chan() before clk_prepare_enable(), the clock
won't be taken in case of a DMA PROBE_DEFER error, and so it doesn't need
to be disabled. Then USART is still clocked for early console.
Fixes: a7770a4bfc ("serial: stm32: defer probe for dma devices")
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20221118170602.1057863-1-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'contains' applies to arrays, but 'xlnx,use-parity' is a scalar. So drop
'contains' from the 'if' schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221111212838.4103828-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clearing the RX FIFO will cause data loss.
Copy the pl011_enabl_interrupts implementation, and remove the clear
interrupt and FIFO part of the code.
Fixes: 211565b100 ("serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle")
Signed-off-by: delisun <delisun@pateo.com.cn>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20221110020108.7700-1-delisun@pateo.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chapter "B Generic UART" in "ARM Server Base System Architecture" [1]
documentation describes a generic UART interface. Such generic UART
does not support DMA. In current code, sbsa_uart_pops and
amba_pl011_pops share the same stop_rx operation, which will invoke
pl011_dma_rx_stop, leading to an access of the DMACR register. This
commit adds a using_rx_dma check in pl011_dma_rx_stop to avoid the
access to DMACR register for SBSA UARTs which does not support DMA.
When the kernel enables DMA engine with "CONFIG_DMA_ENGINE=y", Linux
SBSA PL011 driver will access PL011 DMACR register in some functions.
For most real SBSA Pl011 hardware implementations, the DMACR write
behaviour will be ignored. So these DMACR operations will not cause
obvious problems. But for some virtual SBSA PL011 hardware, like Xen
virtual SBSA PL011 (vpl011) device, the behaviour might be different.
Xen vpl011 emulation will inject a data abort to guest, when guest is
accessing an unimplemented UART register. As Xen VPL011 is SBSA
compatible, it will not implement DMACR register. So when Linux SBSA
PL011 driver access DMACR register, it will get an unhandled data abort
fault and the application will get a segmentation fault:
Unhandled fault at 0xffffffc00944d048
Mem abort info:
ESR = 0x96000000
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x00: ttbr address size fault
Data abort info:
ISV = 0, ISS = 0x00000000
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000020e2e000
[ffffffc00944d048] pgd=100000003ffff803, p4d=100000003ffff803, pud=100000003ffff803, pmd=100000003fffa803, pte=006800009c090f13
Internal error: ttbr address size fault: 96000000 [#1] PREEMPT SMP
...
Call trace:
pl011_stop_rx+0x70/0x80
tty_port_shutdown+0x7c/0xb4
tty_port_close+0x60/0xcc
uart_close+0x34/0x8c
tty_release+0x144/0x4c0
__fput+0x78/0x220
____fput+0x1c/0x30
task_work_run+0x88/0xc0
do_notify_resume+0x8d0/0x123c
el0_svc+0xa8/0xc0
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x1a0/0x1a4
Code: b9000083 b901f001 794038a0 8b000042 (b9000041)
---[ end trace 83dd93df15c3216f ]---
note: bootlogd[132] exited with preempt_count 1
/etc/rcS.d/S07bootlogd: line 47: 132 Segmentation fault start-stop-daemon
This has been discussed in the Xen community, and we think it should fix
this in Linux. See [2] for more information.
[1] https://developer.arm.com/documentation/den0094/c/?lang=en
[2] https://lists.xenproject.org/archives/html/xen-devel/2022-11/msg00543.html
Fixes: 0dd1e247fd (drivers: PL011: add support for the ARM SBSA generic UART)
Signed-off-by: Jiamei Xie <jiamei.xie@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20221117103237.86856-1-jiamei.xie@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It contains only struct uart_port, so no need for another structure.
Remove it and convert the rest to use struct uart_port directly.
Cc: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20221115071724.5185-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of self-defined struct altera_jtaguart::imr, use preexisting
uart_port::read_status_mask.
Note that imr was ulong. But there is no reason for that, its values are
uints. And readl/writel's are used to read it/write to it.
Cc: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20221115071724.5185-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TTY_NORMAL is the only value it contains, so remove the variable and use
the constant instead.
Cc: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20221115071724.5185-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local tail variable in n_tty_read() is used for one purpose, it
keeps the old tail. Thus, rename it appropriately to improve code
readability.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/22b37499-ff9a-7fc1-f6e0-58411328d122@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_device_uevent() does not modify the struct device * passed into it,
so make it a const * to enforce this. Also the documentation for the
function was really wrong so fix that up at the same time.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20221121094649.1556002-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The name() callback in struct kset_uevent_ops does not modify the
kobject passed into it, so make the pointer const to enforce this
restriction. When doing so, fix up the single existing name() callback
to have the correct signature to preserve the build.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221121094649.1556002-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
