We define and use apply_alternatives_vdso() within alternative.c, and
don't provide a prototype in a header. There's no need for it to be
visible outside of alternative.c, so mark it as static.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221117131650.4056636-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
SM6350 has a qcom,smmu-v2-style SMMU just for Adreno and friends.
Document it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221117094422.11000-2-konrad.dybcio@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
For crashkernel=X without '@offset', select a region within DMA zones
first, and fall back to reserve region above DMA zones. This allows
users to use the same configuration on multiple platforms.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221116121044.1690-3-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Try to allocate at least 128 MiB low memory automatically for the case
that crashkernel=,high is explicitly specified, while crashkenrel=,low
is omitted. This allows users to focus more on the high memory
requirements of their business rather than the low memory requirements
of the crash kernel booting.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221116121044.1690-2-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
__create_pgd_mapping_locked() expects a page allocator used while mapping a
virtual range. This page allocator function propagates down the call chain,
while building intermediate levels in the page table. Passed page allocator
is a necessary ingredient required to build the page table but its presence
can be asserted just once in the very beginning rather than in all the down
stream functions. This consolidates BUG_ON(!pgtable_alloc) checks just in a
single place i.e __create_pgd_mapping_locked().
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20221118053102.500216-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The same file provides two tables used in separate drivers, make them
as __maybe_unused to avoid errors:
sound/soc/intel/boards/sof_sdw_amp_coeff_tables.h:163:17: error:
‘dell_0b00_bq_params’ defined but not used
[-Werror=unused-const-variable=]
163 | static const u8 dell_0b00_bq_params[] = {
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221118015106.532302-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDAudio implementation found in sound/pci/hda expects a valid stream
pointer in substream->runtime->private_data location. For ASoC users,
that should point to a valid link stream which is assigned when BE
opens.
As BE borrows its runtime from FE, the information may be lost when
reparenting comes into picture - see dpcm_be_reparent(). To support the
DPCM reparenting functionality for HDAudio scenarios while still
fulfilling expectations of HDAudio common code, have all FEs point to
the same private data.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221118113052.1340593-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sony's downstream driver [1], among some other changes, adds a
seemingly random 10ms usleep_range, which turned out to be necessary
for the hardware to function properly on at least Sony Xperia 1 IV.
Without this, I2C transactions with the SLG51000 straight up fail.
Relax (10-10ms -> 10-11ms) and add the aforementioned sleep to make
sure the hardware has some time to wake up.
(nagara-2.0.0-mlc/vendor/semc/hardware/camera-kernel-module/)
[1] https://developer.sony.com/file/download/open-source-archive-for-64-0-m-4-29/
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221118131035.54874-1-konrad.dybcio@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
CONFIG_INTEL_IFS_DEVICE is not used anywhere. The selection in
Kconfig is therefore pointless. Delete it.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221117035935.4136738-2-jithu.joseph@intel.com
Cleanup hardcoded header sizes to use P9_HDRSZ instead of '7'
Link: https://lkml.kernel.org/r/20221117091159.31533-4-guozihua@huawei.com
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: commit message adjusted to make sense after offset size
adjustment got removed]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
This commit replaces arm64's support for FTRACE_WITH_REGS with support
for FTRACE_WITH_ARGS. This removes some overhead and complexity, and
removes some latent issues with inconsistent presentation of struct
pt_regs (which can only be reliably saved/restored at exception
boundaries).
FTRACE_WITH_REGS has been supported on arm64 since commit:
3b23e4991f ("arm64: implement ftrace with regs")
As noted in the commit message, the major reasons for implementing
FTRACE_WITH_REGS were:
(1) To make it possible to use the ftrace graph tracer with pointer
authentication, where it's necessary to snapshot/manipulate the LR
before it is signed by the instrumented function.
(2) To make it possible to implement LIVEPATCH in future, where we need
to hook function entry before an instrumented function manipulates
the stack or argument registers. Practically speaking, we need to
preserve the argument/return registers, PC, LR, and SP.
Neither of these need a struct pt_regs, and only require the set of
registers which are live at function call/return boundaries. Our calling
convention is defined by "Procedure Call Standard for the Arm® 64-bit
Architecture (AArch64)" (AKA "AAPCS64"), which can currently be found
at:
https://github.com/ARM-software/abi-aa/blob/main/aapcs64/aapcs64.rst
Per AAPCS64, all function call argument and return values are held in
the following GPRs:
* X0 - X7 : parameter / result registers
* X8 : indirect result location register
* SP : stack pointer (AKA SP)
Additionally, ad function call boundaries, the following GPRs hold
context/return information:
* X29 : frame pointer (AKA FP)
* X30 : link register (AKA LR)
... and for ftrace we need to capture the instrumented address:
* PC : program counter
No other GPRs are relevant, as none of the other arguments hold
parameters or return values:
* X9 - X17 : temporaries, may be clobbered
* X18 : shadow call stack pointer (or temorary)
* X19 - X28 : callee saved
This patch implements FTRACE_WITH_ARGS for arm64, only saving/restoring
the minimal set of registers necessary. This is always sufficient to
manipulate control flow (e.g. for live-patching) or to manipulate
function arguments and return values.
This reduces the necessary stack usage from 336 bytes for pt_regs down
to 112 bytes for ftrace_regs + 32 bytes for two frame records, freeing
up 188 bytes. This could be reduced further with changes to the
unwinder.
As there is no longer a need to save different sets of registers for
different features, we no longer need distinct `ftrace_caller` and
`ftrace_regs_caller` trampolines. This allows the trampoline assembly to
be simpler, and simplifies code which previously had to handle the two
trampolines.
I've tested this with the ftrace selftests, where there are no
unexpected failures.
Co-developed-by: Florent Revest <revest@chromium.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Florent Revest <revest@chromium.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In subsequent patches we'll arrange for architectures to have an
ftrace_regs which is entirely distinct from pt_regs. In preparation for
this, we need to minimize the use of pt_regs to where strictly necessary
in the core ftrace code.
This patch adds new ftrace_regs_{get,set}_*() helpers which can be used
to manipulate ftrace_regs. When CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y,
these can always be used on any ftrace_regs, and when
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=n these can be used when regs are
available. A new ftrace_regs_has_args(fregs) helper is added which code
can use to check when these are usable.
Co-developed-by: Florent Revest <revest@chromium.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In subsequent patches we'll add a sew of ftrace_regs_{get,set}_*()
helpers. In preparation, this patch renames
ftrace_instruction_pointer_set() to
ftrace_regs_set_instruction_pointer().
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In subsequent patches we'll arrange for architectures to have an
ftrace_regs which is entirely distinct from pt_regs. In preparation for
this, we need to minimize the use of pt_regs to where strictly
necessary in the core ftrace code.
This patch changes the prototype of arch_ftrace_set_direct_caller() to
take ftrace_regs rather than pt_regs, and moves the extraction of the
pt_regs into arch_ftrace_set_direct_caller().
On x86, arch_ftrace_set_direct_caller() can be used even when
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=n, and <linux/ftrace.h> defines
struct ftrace_regs. Due to this, it's necessary to define
arch_ftrace_set_direct_caller() as a macro to avoid using an incomplete
type. I've also moved the body of arch_ftrace_set_direct_caller() after
the CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y defineidion of struct
ftrace_regs.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Build on arm64 allmodconfig failed with:
| depmod: ERROR: Cycle detected: arm_cspmu -> nvidia_cspmu -> arm_cspmu
| depmod: ERROR: Found 2 modules in dependency cycles!
The arm_cspmu.c provides standard functions to operate the PMU and the
vendor code provides vendor specific attributes. Both need to be built as
single kernel module.
Update the makefile to compile sources under arm_cspmu into one module.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-and-Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221116203952.34168-1-bwicaksono@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Building on x86_64 allmodconfig failed:
| drivers/perf/arm_cspmu/arm_cspmu.c:1114:29: error: implicit
| declaration of function 'get_acpi_id_for_cpu'
get_acpi_id_for_cpu is a helper function from ARM64.
Fix by adding ARM64 dependency.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221116190455.55651-1-bwicaksono@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
This error was reported while fuzzing:
BUG: KASAN: slab-out-of-bounds in _copy_to_iter+0xd35/0x1190
Write of size 4043 at addr ffff888008724eb1 by task kworker/1:1/24
CPU: 1 PID: 24 Comm: kworker/1:1 Not tainted 6.1.0-rc5-00002-g1adf73218daa-dirty #223
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
Workqueue: events p9_read_work
Call Trace:
<TASK>
dump_stack_lvl+0x4c/0x64
print_report+0x178/0x4b0
kasan_report+0xae/0x130
kasan_check_range+0x179/0x1e0
memcpy+0x38/0x60
_copy_to_iter+0xd35/0x1190
copy_page_to_iter+0x1d5/0xb00
pipe_read+0x3a1/0xd90
__kernel_read+0x2a5/0x760
kernel_read+0x47/0x60
p9_read_work+0x463/0x780
process_one_work+0x91d/0x1300
worker_thread+0x8c/0x1210
kthread+0x280/0x330
ret_from_fork+0x22/0x30
</TASK>
Allocated by task 457:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x7e/0x90
__kmalloc+0x59/0x140
p9_fcall_init.isra.11+0x5d/0x1c0
p9_tag_alloc+0x251/0x550
p9_client_prepare_req+0x162/0x350
p9_client_rpc+0x18d/0xa90
p9_client_create+0x670/0x14e0
v9fs_session_init+0x1fd/0x14f0
v9fs_mount+0xd7/0xaf0
legacy_get_tree+0xf3/0x1f0
vfs_get_tree+0x86/0x2c0
path_mount+0x885/0x1940
do_mount+0xec/0x100
__x64_sys_mount+0x1a0/0x1e0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
This BUG pops up when trying to reproduce
https://syzkaller.appspot.com/bug?id=6c7cd46c7bdd0e86f95d26ec3153208ad186f9fa
The callstack is different but the issue is valid and re-producable with
the same re-producer in the link.
The root cause of this issue is that we check the size of the message
received against the msize of the client in p9_read_work. However, it
turns out that capacity is no longer consistent with msize. Thus,
the message size should be checked against sdata capacity.
As the msize is non-consistant with the capacity of the tag and as we
are now checking message size against capacity directly, there is no
point checking message size against msize. So remove it.
Link: https://lkml.kernel.org/r/20221117091159.31533-2-guozihua@huawei.com
Link: https://lkml.kernel.org/r/20221117091159.31533-3-guozihua@huawei.com
Reported-by: syzbot+0f89bd13eaceccc0e126@syzkaller.appspotmail.com
Fixes: 60ece0833b ("net/9p: allocate appropriate reduced message buffers")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: squash patches 1 & 2 and fix size including header part]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Syz reported the following issue:
kernel BUG at lib/list_debug.c:53!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:__list_del_entry_valid.cold+0x5c/0x72
Call Trace:
<TASK>
p9_fd_cancel+0xb1/0x270
p9_client_rpc+0x8ea/0xba0
p9_client_create+0x9c0/0xed0
v9fs_session_init+0x1e0/0x1620
v9fs_mount+0xba/0xb80
legacy_get_tree+0x103/0x200
vfs_get_tree+0x89/0x2d0
path_mount+0x4c0/0x1ac0
__x64_sys_mount+0x33b/0x430
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
The process is as follows:
Thread A: Thread B:
p9_poll_workfn() p9_client_create()
... ...
p9_conn_cancel() p9_fd_cancel()
list_del() ...
... list_del() //list_del
corruption
There is no lock protection when deleting list in p9_conn_cancel(). After
deleting list in Thread A, thread B will delete the same list again. It
will cause issue of list_del corruption.
Setting req->status to REQ_STATUS_ERROR under lock prevents other
cleanup paths from trying to manipulate req_list.
The other thread can safely check req->status because it still holds a
reference to req at this point.
Link: https://lkml.kernel.org/r/20221110122606.383352-1-shaozhengchao@huawei.com
Fixes: 52f1c45dde ("9p: trans_fd/p9_conn_cancel: drop client lock earlier")
Reported-by: syzbot+9b69b8d10ab4a7d88056@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
[Dominique: add description of the fix in commit message]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
In pch_gbe_xmit_frame(), NETDEV_TX_OK will be returned whether
pch_gbe_tx_queue() sends data successfully or not, so pch_gbe_tx_queue()
needs to free skb before returning. But pch_gbe_tx_queue() returns without
freeing skb in case of dma_map_single() fails. Add dev_kfree_skb_any()
to fix it.
Fixes: 77555ee722 ("net: Add Gigabit Ethernet driver of Topcliff PCH")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously we leverage NCI_UNREG and the lock inside nci_close_device to
prevent the race condition between opening a device and closing a
device. However, it still has problem because a failed opening command
will erase the NCI_UNREG flag and allow another opening command to
bypass the status checking.
This fix corrects that by making sure the NCI_UNREG is held.
Reported-by: syzbot+43475bf3cfbd6e41f5b7@syzkaller.appspotmail.com
Fixes: 48b71a9e66 ("NFC: add NCI_UNREG flag to eliminate the race")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
The caller of del_timer_sync must prevent restarting of the timer, If
we have no this synchronization, there is a small probability that the
cancellation will not be successful.
And syzbot report the fellowing crash:
==================================================================
BUG: KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline]
BUG: KASAN: use-after-free in enqueue_timer+0x18/0xa4 kernel/time/timer.c:605
Write at addr f9ff000024df6058 by task syz-fuzzer/2256
Pointer tag: [f9], memory tag: [fe]
CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted 6.1.0-rc5-syzkaller-00008-
ge01d50cbd6ee #0
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156
dump_backtrace arch/arm64/kernel/stacktrace.c:162 [inline]
show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x1a8/0x4a0 mm/kasan/report.c:395
kasan_report+0x94/0xb4 mm/kasan/report.c:495
__do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320
do_bad_area arch/arm64/mm/fault.c:473 [inline]
do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749
do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825
el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367
el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427
el1h_64_sync+0x64/0x68 arch/arm64/kernel/entry.S:576
hlist_add_head include/linux/list.h:929 [inline]
enqueue_timer+0x18/0xa4 kernel/time/timer.c:605
mod_timer+0x14/0x20 kernel/time/timer.c:1161
mrp_periodic_timer_arm net/802/mrp.c:614 [inline]
mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627
call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474
expire_timers+0x98/0xc4 kernel/time/timer.c:1519
To fix it, we can introduce a new active flags to make sure the timer will
not restart.
Reported-by: syzbot+6fd64001c20aa99e34a4@syzkaller.appspotmail.com
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
You'd think people know that the internal 100BASE-TX PHY on the SJA1110
responds only to clause 22 MDIO transactions, but they don't :)
When a clause 45 transaction is attempted, sja1105_base_tx_mdio_read()
and sja1105_base_tx_mdio_write() don't expect "reg" to contain bit 30
set (MII_ADDR_C45) and pack this value into the SPI transaction buffer.
But the field in the SPI buffer has a width smaller than 30 bits, so we
see this confusing message from the packing() API rather than a proper
rejection of C45 transactions:
Call trace:
dump_stack+0x1c/0x38
sja1105_pack+0xbc/0xc0 [sja1105]
sja1105_xfer+0x114/0x2b0 [sja1105]
sja1105_xfer_u32+0x44/0xf4 [sja1105]
sja1105_base_tx_mdio_read+0x44/0x7c [sja1105]
mdiobus_read+0x44/0x80
get_phy_c45_ids+0x70/0x234
get_phy_device+0x68/0x15c
fwnode_mdiobus_register_phy+0x74/0x240
of_mdiobus_register+0x13c/0x380
sja1105_mdiobus_register+0x368/0x490 [sja1105]
sja1105_setup+0x94/0x119c [sja1105]
Cannot store 401d2405 inside bits 24-4 (would truncate)
Fixes: 5a8f09748e ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=xivU
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-next-20221116' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fix oops and missing config conditionals
The patches that were pulled into net-next previously[1] had some issues
that this patchset fixes:
(1) Fix missing IPV6 config conditionals.
(2) Fix an oops caused by calling udpv6_sendmsg() directly on an AF_INET
socket.
(3) Fix the validation of network addresses on entry to socket functions
so that we don't allow an AF_INET6 address if we've selected an
AF_INET transport socket.
Link: https://lore.kernel.org/r/166794587113.2389296.16484814996876530222.stgit@warthog.procyon.org.uk/ [1]
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After rxrpc_unbundle_conn() has removed a connection from a bundle, it
checks to see if there are any conns with available channels and, if not,
removes and attempts to destroy the bundle.
Whilst it does check after grabbing client_bundles_lock that there are no
connections attached, this races with rxrpc_look_up_bundle() retrieving the
bundle, but not attaching a connection for the connection to be attached
later.
There is therefore a window in which the bundle can get destroyed before we
manage to attach a new connection to it.
Fix this by adding an "active" counter to struct rxrpc_bundle:
(1) rxrpc_connect_call() obtains an active count by prepping/looking up a
bundle and ditches it before returning.
(2) If, during rxrpc_connect_call(), a connection is added to the bundle,
this obtains an active count, which is held until the connection is
discarded.
(3) rxrpc_deactivate_bundle() is created to drop an active count on a
bundle and destroy it when the active count reaches 0. The active
count is checked inside client_bundles_lock() to prevent a race with
rxrpc_look_up_bundle().
(4) rxrpc_unbundle_conn() then calls rxrpc_deactivate_bundle().
Fixes: 245500d853 ("rxrpc: Rewrite the client connection manager")
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-15975
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: zdi-disclosures@trendmicro.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan reported a new warning after my recent patch:
New smatch warnings:
net/core/dev.c:6409 napi_disable() error: uninitialized symbol 'new'.
Indeed, we must first wait for STATE_SCHED and STATE_NPSVC to be cleared,
to make sure @new variable has been initialized properly.
Fixes: 4ffa1d1c68 ("net: adopt try_cmpxchg() in napi_{enable|disable}()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "pkt" was supposed to have been deleted in a previous patch. It
leads to an uninitialized variable bug.
Fixes: 72f0c6fb05 ("rxrpc: Allocate ACK records at proposal and queue for transmission")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The error handling for if skb_copy_bits() fails was accidentally deleted
so the rxkad_decrypt_ticket() function is not called.
Fixes: 5d7edbc923 ("rxrpc: Get rid of the Rx ring")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit afef88e655 ("selftests/bpf: Store BPF object files with
.bpf.o extension"), we should use xdp_dummy.bpf.o instade of xdp_dummy.o.
In addition, use the BPF_FILE variable to save the BPF object file name,
which can be better identified and modified.
Fixes: afef88e655 ("selftests/bpf: Store BPF object files with .bpf.o extension")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Cc: Daniel Müller <deso@posteo.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Get rid of cpu_relax in mtk_pending_work routine since MTK_RESETTING is
set only in mtk_pending_work() and it runs holding rtnl lock
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Restore user configured MTU running mtk_hw_init() during tx timeout routine
since it will be overwritten after a hw reset.
Reported-by: Felix Fietkau <nbd@nbd.name>
Fixes: 9ea4d31150 ("net: ethernet: mediatek: add the whole ethernet reset into the reset process")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The at91 QSPI IP uses a default value of half of the period of the QSPI
clock period for the cs-setup time, which is not always enough, an example
being the sst26vf064b SPI NOR flash which requires a minimum cs-setup time
of 5 ns. It was observed that none of the at91 SoCs can fulfill the
minimum CS setup time for the aforementioned flash, as they operate at
high frequencies and half a period does not suffice for the required CS
setup time. Add support for configuring the CS timing in the controller.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20221117105249.115649-5-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 4ccf359849 ("spi: remove spi_set_cs_timing()"), removed the
method as noboby used it. Nobody used it probably because some SPI
controllers use some default large cs-setup time that covers the usual
cs-setup time required by the spi devices. There are though SPI controllers
that have a smaller granularity for the cs-setup time and their default
value can't fulfill the spi device requirements. That's the case for the
at91 QSPI IPs where the default cs-setup time is half of the QSPI clock
period. This was observed when using an sst26vf064b SPI NOR flash which
needs a spi-cs-setup-ns = <7>; in order to be operated close to its maximum
104 MHz frequency.
Call spi_set_cs_timing() in spi_setup() just before calling spi_set_cs(),
as the latter needs the CS timings already set.
If spi->controller->set_cs_timing is not set, the method will return 0.
There's no functional impact expected for the existing drivers. Even if the
spi-mt65xx.c and spi-tegra114.c drivers set the set_cs_timing method,
there's no user for them as of now. The only tested user of this support
will be a SPI NOR flash that comunicates with the Atmel QSPI controller for
which the support follows in the next patches.
One will notice that this support is a bit different from the one that was
removed in commit 4ccf359849 ("spi: remove spi_set_cs_timing()"),
because this patch adapts to the changes done after the removal: the move
of the cs delays to the spi device, the retirement of the lelgacy GPIO
handling. The mutex handling was removed from spi_set_cs_timing() because
we now always call spi_set_cs_timing() in spi_setup(), which already
handles the spi->controller->io_mutex, so use the mutex handling from
spi_setup().
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20221117105249.115649-4-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SPI NOR flashes have specific cs-setup time requirements without which
they can't work at frequencies close to their maximum supported frequency,
as they miss the first bits of the instruction command. Unrecognized
commands are ignored, thus the flash will be unresponsive. Introduce the
spi-cs-setup-ns property to allow spi devices to specify their cs setup
time.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20221117105249.115649-3-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SPI NOR flashes have specific cs-setup time requirements without which
they can't work at frequencies close to their maximum supported frequency,
as they miss the first bits of the instruction command. Unrecognized
commands are ignored, thus the flash will be unresponsive. Introduce the
spi-cs-setup-ns property to allow spi devices to specify their cs setup
time.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20221117105249.115649-2-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for system suspend/resume by moving the enable/disable
of interrupts in mchp_spdiftx_trigger() on SNDRV_PCM_TRIGGER_SUSPEND/
SNDRV_PCM_TRIGGER_RESUME commands.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221117123750.291911-4-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add runtime PM support for Microchip SPDIFTX driver. The runtime PM
APIs disables/enables IP's clock and enables/disable caching for
regmap.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221117123750.291911-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use a temporary variable to keep the AES3 value. With this a
spin_unlock_irqrestore() call has been removed from the final code.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221117123750.291911-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SPE DT node to FVP model. If the model doesn't support SPE (e.g.,
turned off via parameter), the driver will skip the initialisation
accordingly and thus is safe.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20221117102536.237515-1-james.clark@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The Allwinner D1 SoC has a DMIC codec like the one in the H6. It appears
to be register-compatible with the H6 variant, and the existing Linux
driver has been tested on a D1-based board, the Lichee RV 86 Panel.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Ban Tao <fengzheng923@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221116034621.37762-1-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Smatch report warning as follows:
sound/soc/amd/acp/acp-platform.c:199 acp_dma_open() warn:
'&stream->list' not removed from list
If snd_pcm_hw_constraint_integer() fails in acp_dma_open(),
stream will be freed, but stream->list will not be removed from
adata->stream_list, then list traversal may cause UAF.
Fix by adding the newly allocated stream to the list once it's fully
initialised.
Fixes: 7929985cfe ("ASoC: amd: acp: Initialize list to store acp_stream during pcm_open")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221118030056.3135960-1-cuigaosheng1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add rt1015p speaker amplifier support with a new board info
'adl_rt1015p_nau8825' which supports NAU8825 on SSP0 and ALC1015Q on
SSP1.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221117231919.112483-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dan Carpenter reported that Smatch found an instance where a pointer
which had previously been assumed could be null (as indicated by a
null check) was later dereferenced without a similar check.
In practice this doesn't lead to a problem because currently the
pointers used are all non-null. Nevertheless this patch addresses
the reported problem.
In addition, I spotted another bug that arose in the same commit.
When the command to initialize a routing table memory region was
added, the number of entries computed for the non-hashed table
was wrong (it ended up being a Boolean rather than the count
intended). This bug is fixed here as well.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/kernel-janitors/Y3OOP9dXK6oEydkf@kili
Tested-by: Caleb Connolly <caleb.connolly@linaro.com>
Fixes: 5cb76899fb ("net: ipa: reduce arguments to ipa_table_init_add()")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Second set of patches for v6.2. Only driver patches this time, nothing
really special. Unused platform data support was removed from wl1251
and rtw89 got WoWLAN support.
Major changes:
ath11k
* support configuring channel dwell time during scan
rtw89
* new dynamic header firmware format support
* Wake-over-WLAN support
rtl8xxxu
* enable IEEE80211_HW_SUPPORT_FAST_XMIT
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmN3ZagRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuk/Af+M9IXyWmis9behHlz2U+4PJ/+JF8VYIck
6Xup+FM0O1w6aHhAL8gNOhLl62jpYB0Exou0YizInGvwjjQk2Gtuq60KshkbN2zL
YK3sbcS66PyE19gfIQKJTW/s+9aBncRuvEb6HTZx5iF96mVFPeBDPduUGQksGs5/
Egf03eAqzdcIIcejKG1SUn2o0fLJ6jds0VftAas+chKI2Z5ADQWPzugvU0vlvXVE
oq3ws7Sg0yGcwOOttFwaXMBPrjmCty5uc/ELMhjvSLAsKULXymjZkrU1m5tanhGu
N1MDqviwCK7PJC/wQ2xo7YKNY/1LUc0xbwfbEXQITfbbPyjOz+ynQQ==
=wKQZ
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.2
Second set of patches for v6.2. Only driver patches this time, nothing
really special. Unused platform data support was removed from wl1251
and rtw89 got WoWLAN support.
Major changes:
ath11k
* support configuring channel dwell time during scan
rtw89
* new dynamic header firmware format support
* Wake-over-WLAN support
rtl8xxxu
* enable IEEE80211_HW_SUPPORT_FAST_XMIT
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long says:
====================
sctp: support vrf processing
This patchset adds the VRF processing in SCTP. Simliar to TCP/UDP,
it includes socket bind and socket/association lookup changes.
For socket bind change, it allows sockets to bind to a VRF device
and allows multiple sockets with the same IP and PORT to bind to
different interfaces in patch 1-3.
For socket/association lookup change, it adds dif and sdif check
in both asoc and ep lookup in patch 4 and 5, and when binding to
nodev, users can decide if accept the packets received from one
l3mdev by setup a sysctl option in patch 6.
Note with VRF support, in a netns, an association will be decided
by src ip + src port + dst ip + dst port + bound_dev_if, and it's
possible for ss to have:
State Local Address:Port Peer Address:Port
ESTAB 192.168.1.2%vrf-s1:1234
`- ESTAB 192.168.1.2%veth1:1234 192.168.1.1:1234
ESTAB 192.168.1.2%vrf-s2:1234
`- ESTAB 192.168.1.2%veth2:1234 192.168.1.1:1234
See the selftest in patch 7 for more usage.
Also, thanks Carlo for testing this patch series on their use.
v1->v2:
- In Patch 5, move sctp_sk_bound_dev_eq() definition to net/sctp/
input.c to avoid a build error when IP_SCTP is disabled, as Paolo
suggested.
- In Patch 7, avoid one sleep by disabling the IPv6 dad, and remove
another sleep by using ss to check if the server's ready, and also
delete two unncessary sleeps in sctp_hello.c, as Paolo suggested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds 12 small test cases: 01-04 test for the sysctl
net.sctp.l3mdev_accept. 05-10 test for only binding to a right
l3mdev device, the connection can be created. 11-12 test for
two socks binding to different l3mdev devices at the same time,
each of them can process the packets from the corresponding
peer. The tests run for both IPv4 and IPv6 SCTP.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to add sysctl net.sctp.l3mdev_accept to allow
users to change the pernet global l3mdev_accept.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch at first adds a pernet global l3mdev_accept to decide if it
accepts the packets from a l3mdev when a SCTP socket doesn't bind to
any interface. It's set to 1 to avoid any possible incompatible issue,
and in next patch, a sysctl will be introduced to allow to change it.
Then similar to inet/udp_sk_bound_dev_eq(), sctp_sk_bound_dev_eq() is
added to check either dif or sdif is equal to sk_bound_dev_if, and to
check sid is 0 or l3mdev_accept is 1 if sk_bound_dev_if is not set.
This function is used to match a association or a endpoint, namely
called by sctp_addrs_lookup_transport() and sctp_endpoint_is_match().
All functions that needs updating are:
sctp_rcv():
asoc:
__sctp_rcv_lookup()
__sctp_lookup_association() -> sctp_addrs_lookup_transport()
__sctp_rcv_lookup_harder()
__sctp_rcv_init_lookup()
__sctp_lookup_association() -> sctp_addrs_lookup_transport()
__sctp_rcv_walk_lookup()
__sctp_rcv_asconf_lookup()
__sctp_lookup_association() -> sctp_addrs_lookup_transport()
ep:
__sctp_rcv_lookup_endpoint() -> sctp_endpoint_is_match()
sctp_connect():
sctp_endpoint_is_peeled_off()
__sctp_lookup_association()
sctp_has_association()
sctp_lookup_association()
__sctp_lookup_association() -> sctp_addrs_lookup_transport()
sctp_diag_dump_one():
sctp_transport_lookup_process() -> sctp_addrs_lookup_transport()
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add skb_sdif function in struct sctp_af to get the enslaved device
for both ipv4 and ipv6 when adding SCTP VRF support in sctp_rcv in
the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
