It does not appear that FOLL_FORCE should be needed for setting up the
stack pages. They are allocated using the nascent brpm->vma, which was
newly created with VM_STACK_FLAGS, which an arch can override, but they
all appear to include VM_WRITE | VM_MAYWRITE. Remove FOLL_FORCE.
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/lkml/202211171439.CDE720EAD@keescook/
Signed-off-by: Kees Cook <keescook@chromium.org>
Hou Tao says:
====================
From: Hou Tao <houtao1@huawei.com>
Hi,
The patch set tries to fix the problems found when testing ringbuf by
using 4KB and 2GB size. Patch 1 fixes the probe of ring buffer map on
host with 64KB page (e.g., an ARM64 host). Patch 2 & 3 fix the overflow
of length when mmaping 2GB kernel ringbuf or user ringbuf on libbpf.
Patch 4 just reject the reservation with invalid size.
Please see individual patch for details. And comments are always
welcome.
Change Log:
v2:
* patch 1: use page size instead of adjust_ringbuf_sz(4096) as main_entries (suggested by Stanislav)
* patch 2 & 3: use "mmap_sz" instead of "ro_size/wr_size" as name of mmap length (From Andrii)
v1: https://lore.kernel.org/bpf/20221111092642.2333724-1-houtao@huaweicloud.com
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The top two bits of size are used as busy and discard flags, so reject
the reservation that has any of these special bits in the size. With the
addition of validity check, these is also no need to check whether or
not total_size is overflowed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-5-houtao@huaweicloud.com
Similar with the overflow problem on ringbuf mmap, in user_ringbuf_map()
2 * max_entries may overflow u32 when mapping writeable region.
Fixing it by casting the size of writable mmap region into a __u64 and
checking whether or not there will be overflow during mmap.
Fixes: b66ccae01f ("bpf: Add libbpf logic for user-space ring buffer")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-4-houtao@huaweicloud.com
The maximum size of ringbuf is 2GB on x86-64 host, so 2 * max_entries
will overflow u32 when mapping producer page and data pages. Only
casting max_entries to size_t is not enough, because for 32-bits
application on 64-bits kernel the size of read-only mmap region
also could overflow size_t.
So fixing it by casting the size of read-only mmap region into a __u64
and checking whether or not there will be overflow during mmap.
Fixes: bf99c936f9 ("libbpf: Add BPF ring buffer support")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-3-houtao@huaweicloud.com
Using page size as max_entries when probing ring buffer map, else the
probe may fail on host with 64KB page size (e.g., an ARM64 host).
After the fix, the output of "bpftool feature" on above host will be
correct.
Before :
eBPF map_type ringbuf is NOT available
eBPF map_type user_ringbuf is NOT available
After :
eBPF map_type ringbuf is available
eBPF map_type user_ringbuf is available
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-2-houtao@huaweicloud.com
For Tegra30 Pegatron Chagall, the sdmmc3_dat3_pb5 pin was defined
multiple times, leading to a DT validation error. Remove the duplicate
entry.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some boards are using the interrupt-parent property to point at the GPIO
controller since it handles the interrupts for the GPIO keys. However, a
node needs an interrupts property for interrupt-parent to be meaningful,
which these boards don't have.
gpio-keys in these cases will directly use the GPIO lines specified in
the key definitions and rely on the implicit conversion of those GPIOs
to interrupts by the operating system, so explicit specification of the
interrupts is not required.
Remove the unnecessary interrupt-parent properties.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rename the unknown nvidia,ioreset property to nvidia,io-reset, as
specified in the DT bindings and supported by the driver.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra124 Nyan and Venice 2 boards were missing the required power-supply
property in their display panel device tree nodes. Add these properties
to fix validation errors.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pinmux node names should have a pinmux- prefix and not use underscores.
Fix up some cases that didn't follow those rules.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When cross-compiling [1], the get_sys_includes make macro should use
the target system include path, and not the build hosts system include
path.
Make clang honor the CROSS_COMPILE triple.
[1] e.g. "ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- make"
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/bpf/20221115182051.582962-2-bjorn@kernel.org
When cross-compiling selftests/bpf, the resolve_btfids binary end up
in a different directory, than the regular resolve_btfids
builds. Populate RESOLVE_BTFIDS for sub-make, so it can find the
binary.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20221115182051.582962-1-bjorn@kernel.org
All of the IP specific versions are the same now, so
we can just use a common function.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This matches what we do for psp 3.1 and makes ring_init
common for all PSP versions.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix these kernel-doc complaints:
drivers/gpu/drm/amd/display/dc/dc.h:505: warning: cannot understand function prototype: 'struct dc_clocks '
dc.h:472: warning: Enum value 'MPC_SPLIT_AVOID' not described in enum 'pipe_split_policy'
dc.h:472: warning: Enum value 'MPC_SPLIT_AVOID_MULT_DISP' not described in enum 'pipe_split_policy'
dc.h:532: warning: Incorrect use of kernel-doc format: * @fw_based_mclk_switching
Fixes: ea76895ffa ("drm/amd/display: Document pipe split policy")
Fixes: 1682bd1a6b ("drm/amd/display: Expand kernel doc for DC")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
FW fix available to enable cooperative launch for GFX10.3.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow user to know number of compute units (CU) that are in use at any
given moment. Enable access to the method kgd_gfx_v9_get_cu_occupancy
that computes CU occupancy.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the code reusable.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So the code can be reused.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set support flag for VCN/JPEG 4.0.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The patch is enabling mode-1 reset for RAS recovery in fatal error mode.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for RAS table at I2C EEPROM address of 0x40000, since on some
ASICs it is not at 0, but at 0x40000.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't assume FRU MCU memory locations for the FRU data fields, or their sizes,
instead read and interpret the IPMI data, as stipulated in the IPMI spec
version 1.0 rev 1.2.
Extract the Product Name, Product Part/Model Number, and the Product Serial
Number by interpreting the IPMI data.
Check the checksums of the stored IPMI data to make sure we don't read and
give corrupted data back the the user.
Eliminate small I2C reads, and instead read the whole Product Info Area in one
go, and then extract the information we're seeking from it.
Eliminates a whole function, making this file smaller.
v2: Clarify changes in the commit message.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the new correct default FRU MCU I2C address for newer ASICs, so that we
can correctly read the Product Name, Product Part/Model Number and Serial
Number.
On newer ASICs, the FRU MCU was moved to I2C address 0x58.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow non-standard EEPROM I2C address of 0x58, where the Device Type
Identifier is 1011b, where we form 1011000b = 0x58 I2C address, as on some
ASICs the FRU data lives there.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need to call the dev_err() function directly to print a
custom message when handling an error from either the platform_get_irq()
or platform_get_irq_byname() functions as both are going to display an
appropriate error message in case of a failure.
./drivers/firmware/tegra/bpmp-tegra210.c:204:2-9: line 204 is redundant
because platform_get_irq() already prints an error
./drivers/firmware/tegra/bpmp-tegra210.c:216:2-9: line 216 is redundant
because platform_get_irq() already prints an error
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2579
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use devm variants for requesting threaded IRQ and for power-supply
registration. Clean up error path and remove the .remove-callback.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If device_add() succeeds, we should call device_del() when want to
get rid of it, so move it into proper jump symbol.
Otherwise, when __power_supply_register() returns fail and goto
wakeup_init_failed to exit, there is still residue device file in sysfs.
When attempt to probe device again, sysfs would complain as below:
sysfs: cannot create duplicate filename '/devices/platform/i2c/i2c-0/0-001c/power_supply/adp5061'
Call Trace:
dump_stack_lvl+0x68/0x85
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x1b1/0x1d0
kobject_add_internal+0x143/0x390
kobject_add+0x108/0x170
Fixes: 80c6463e2f ("power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Update the BPMP ABI to align with the the latest version.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The @ftrace_mod is allocated by kzalloc(), so both the members {prev,next}
of @ftrace_mode->list are NULL, it's not a valid state to call list_del().
If kstrdup() for @ftrace_mod->{func|module} fails, it goes to @out_free
tag and calls free_ftrace_mod() to destroy @ftrace_mod, then list_del()
will write prev->next and next->prev, where null pointer dereference
happens.
BUG: kernel NULL pointer dereference, address: 0000000000000008
Oops: 0002 [#1] PREEMPT SMP NOPTI
Call Trace:
<TASK>
ftrace_mod_callback+0x20d/0x220
? do_filp_open+0xd9/0x140
ftrace_process_regex.isra.51+0xbf/0x130
ftrace_regex_write.isra.52.part.53+0x6e/0x90
vfs_write+0xee/0x3a0
? __audit_filter_op+0xb1/0x100
? auditd_test_task+0x38/0x50
ksys_write+0xa5/0xe0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Kernel panic - not syncing: Fatal exception
So call INIT_LIST_HEAD() to initialize the list member to fix this issue.
Link: https://lkml.kernel.org/r/20221116015207.30858-1-xiujianfeng@huawei.com
Cc: stable@vger.kernel.org
Fixes: 673feb9d76 ("ftrace: Add :mod: caching infrastructure to trace_array")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add the necessary definition to prevent compilation
errors from the ivc.h file being included multiple times.
This does not currently cause any compilation issues,
but fix this anyway.
Signed-off-by: Manish Bhardwaj <mbhardwaj@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
rb_head_page_deactivate() expects cpu_buffer to contain a valid list of
->pages, so verify that the list is actually present before calling it.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Link: https://lkml.kernel.org/r/20221114143129.3534443-1-d-tatianin@yandex-team.ru
Cc: stable@vger.kernel.org
Fixes: 77ae365eca ("ring-buffer: make lockless")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Another set of devicetree and code changes for SoC platforms,
notably:
- DT schema warning fixes for i.MX
- Functional fixes for i.MX tqma8mqml-mba8mx USB and
i.MX8M OCOTP
- MAINTAINERS updates for Hisilicon and RISC-V, documenting
which RISC-V SoC specific patches will now get merged through
the SoC tree in the future.
- A code fix for at91 suspend, to work around broken hardware
- A devicetree fix for lan966x/pcb8291 LED support
- Lots of DT fixes for Qualcomm SoCs, mostly fixing minor
problems like incorrect register sizes and schema warnings.
One fix makes the UFS controller work on sc8280xp, and
six fixes address the same regulator problem in a variety
of platforms.
-----BEGIN PGP SIGNATURE-----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=Gyt8
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of devicetree and code changes for SoC platforms, notably:
- DT schema warning fixes for i.MX
- Functional fixes for i.MX tqma8mqml-mba8mx USB and i.MX8M OCOTP
- MAINTAINERS updates for Hisilicon and RISC-V, documenting which
RISC-V SoC specific patches will now get merged through the SoC
tree in the future.
- A code fix for at91 suspend, to work around broken hardware
- A devicetree fix for lan966x/pcb8291 LED support
- Lots of DT fixes for Qualcomm SoCs, mostly fixing minor problems
like incorrect register sizes and schema warnings. One fix makes
the UFS controller work on sc8280xp, and six fixes address the same
regulator problem in a variety of platforms"
* tag 'soc-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
MAINTAINERS: repair Microchip corei2c driver entry
MAINTAINERS: add an entry for StarFive devicetrees
MAINTAINERS: generify the Microchip RISC-V entry name
MAINTAINERS: add entries for misc. RISC-V SoC drivers and devicetrees
MAINTAINERS: git://github.com -> https://github.com for HiSilicon
soc: imx8m: Enable OCOTP clock before reading the register
arm64: dts: imx93-pinfunc: drop execution permission
arm64: dts: imx8mn: Fix NAND controller size-cells
arm64: dts: imx8mm: Fix NAND controller size-cells
ARM: dts: imx7: Fix NAND controller size-cells
arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR
ARM: at91: pm: avoid soft resetting AC DLL
ARM: dts: lan966x: Enable sgpio on pcb8291
arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state
ARM: dts: at91: sama7g5: fix signal name of pin PB2
arm64: dts: qcom: sc7280: Add the reset reg for lpass audiocc on SC7280
arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size
arm64: dts: qcom: sc8280xp: drop broken DP PHY nodes
arm64: dts: qcom: sc8280xp: fix USB PHY PCS registers
arm64: dts: qcom: sc8280xp: fix USB1 PHY RX1 registers
...
Remove some left-over from commit e2be04c7f9 ("License cleanup: add SPDX
license identifier to uapi header files with a license")
When the SPDX-License-Identifier tag has been added, the corresponding
license text has not been removed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Kai Vehmanen <kvcontact@nosignal.fi>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If ssi_add_controller() returns error, it should call hsi_put_controller()
to give up the reference that was set in hsi_alloc_controller(), so that
it can call hsi_controller_release() to free controller and ports that
allocated in hsi_alloc_controller().
Fixes: b209e047bc ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
