Add some userfaultfd tests into page_fault_test. Punch holes into the
data and/or page-table memslots, perform some accesses, and check that
the faults are taken (or not taken) when expected.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-12-ricarkol@google.com
Add a new test for stage 2 faults when using different combinations of
guest accesses (e.g., write, S1PTW), backing source type (e.g., anon)
and types of faults (e.g., read on hugetlbfs with a hole). The next
commits will add different handling methods and more faults (e.g., uffd
and dirty logging). This first commit starts by adding two sanity checks
for all types of accesses: AF setting by the hw, and accessing memslots
with holes.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-11-ricarkol@google.com
Now that kvm_vm allows specifying different memslots for code, page tables,
and data, use the appropriate memslot when making allocations in
common/libraty code. Change them accordingly:
- code (allocated by lib/elf) use the CODE memslot
- stacks, exception tables, and other core data pages (like the TSS in x86)
use the DATA memslot
- page tables and the PGD use the PT memslot
- test data (anything allocated with vm_vaddr_alloc()) uses the TEST_DATA
memslot
No functional change intended. All allocators keep using memslot #0.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-10-ricarkol@google.com
Refactor virt_arch_pgd_alloc() and vm_vaddr_alloc() in both RISC-V and
aarch64 to fix the alignment of parameters in a couple of calls. This will
make it easier to fix the alignment in a future commit that adds an extra
parameter (that happens to be very long).
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-9-ricarkol@google.com
The vm_create() helpers are hardcoded to place most page types (code,
page-tables, stacks, etc) in the same memslot #0, and always backed with
anonymous 4K. There are a couple of issues with that. First, tests
willing to differ a bit, like placing page-tables in a different backing
source type must replicate much of what's already done by the vm_create()
functions. Second, the hardcoded assumption of memslot #0 holding most
things is spread everywhere; this makes it very hard to change.
Fix the above issues by having selftests specify how they want memory to be
laid out. Start by changing ____vm_create() to not create memslot #0; a
test (to come) will specify all memslots used by the VM. Then, add the
vm->memslots[] array to specify the right memslot for different memory
allocators, e.g.,: lib/elf should use the vm->[MEM_REGION_CODE] memslot.
This will be used as a way to specify the page-tables memslots (to be
backed by huge pages for example).
There is no functional change intended. The current commit lays out memory
exactly as before. A future commit will change the allocators to get the
region they should be using, e.g.,: like the page table allocators using
the pt memslot.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-8-ricarkol@google.com
Add the backing_src_type into struct userspace_mem_region. This struct
already stores a lot of info about memory regions, except the backing
source type. This info will be used by a future commit in order to
determine the method for punching a hole.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-7-ricarkol@google.com
Copy bitfield.h from include/linux/bitfield.h. A subsequent change will
make use of some FIELD_{GET,PREP} macros defined in this header.
The header was copied as-is, no changes needed.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-6-ricarkol@google.com
Define macros for memory type indexes and construct DEFAULT_MAIR_EL1
with macros from asm/sysreg.h. The index macros can then be used when
constructing PTEs (instead of using raw numbers).
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-5-ricarkol@google.com
Deleting a memslot (when freeing a VM) is not closing the backing fd,
nor it's unmapping the alias mapping. Fix by adding the missing close
and munmap.
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-4-ricarkol@google.com
Add a library function to get the PTE (a host virtual address) of a
given GVA. This will be used in a future commit by a test to clear and
check the access flag of a particular page.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-3-ricarkol@google.com
Move the generic userfaultfd code out of demand_paging_test.c into a
common library, userfaultfd_util. This library consists of a setup and a
stop function. The setup function starts a thread for handling page
faults using the handler callback function. This setup returns a
uffd_desc object which is then used in the stop function (to wait and
destroy the threads).
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221017195834.2295901-2-ricarkol@google.com
Currently, the debug-exceptions test always uses only
{break,watch}point#0 and the highest numbered context-aware
breakpoint. Modify the test to use all {break,watch}points and
context-aware breakpoints supported on the system.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-10-reijiw@google.com
Currently, the debug-exceptions test doesn't have a test case for
a linked watchpoint. Add a test case for the linked watchpoint to
the test. The new test case uses the highest numbered context-aware
breakpoint (for Context ID match), and the watchpoint#0, which is
linked to the context-aware breakpoint.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-9-reijiw@google.com
Currently, the debug-exceptions test doesn't have a test case for
a linked breakpoint. Add a test case for the linked breakpoint to
the test. The new test case uses a pair of breakpoints. One is the
higiest numbered context-aware breakpoint (for Context ID match),
and the other one is the breakpoint#0 (for Address Match), which
is linked to the context-aware breakpoint.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-8-reijiw@google.com
Change debug_version() to take the ID_AA64DFR0_EL1 value instead of
vcpu as an argument, and change its callsite to read ID_AA64DFR0_EL1
(and pass it to debug_version()).
Subsequent patches will reuse the register value in the callsite.
No functional change intended.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-7-reijiw@google.com
Currently, debug-exceptions test unnecessarily tracks some test stages
using GUEST_SYNC(). The code for it needs to be updated as test cases
are added or removed. Stop doing the unnecessary stage tracking,
as they are not so useful and are a bit pain to maintain.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-6-reijiw@google.com
Remove the hard-coded {break,watch}point #0 from the guest_code() in
debug-exceptions to allow {break,watch}point number to be specified.
Change reset_debug_state() to zeroing all dbg{b,w}{c,v}r_el0 registers
so that guest_code() can use the function to reset those registers
even when non-zero {break,watch}points are specified for guest_code().
Subsequent patches will add test cases for non-zero {break,watch}points.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-4-reijiw@google.com
Introduce helpers in the debug-exceptions test to write to
dbg{b,w}{c,v}r registers. Those helpers will be useful for
test cases that will be added to the test in subsequent patches.
No functional change intended.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-3-reijiw@google.com
Use FIELD_GET() macro to extract ID register fields for existing
aarch64 selftests code. No functional change intended.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020054202.2119018-2-reijiw@google.com
vfio_pci_dev_set_needs_reset() inspects the open_count of every device
in the set to determine whether a reset is allowed. The current device
always has open_count == 1 within vfio_pci_core_disable(), effectively
disabling the reset logic. This field is also documented as private in
vfio_device, so it should not be used to determine whether other devices
in the set are open.
Checking for vfio_device_set_open_count() > 1 on the device set fixes
both issues.
After commit 2cd8b14aaa ("vfio/pci: Move to the device set
infrastructure"), failure to create a new file for a device would cause
the reset to be skipped due to open_count being decremented after
calling close_device() in the error path.
After commit eadd86f835 ("vfio: Remove calls to
vfio_group_add_container_user()"), releasing a device would always skip
the reset due to an ordering change in vfio_device_fops_release().
Failing to reset the device leaves it in an unknown state, potentially
causing errors when it is accessed later or bound to a different driver.
This issue was observed with a Radeon RX Vega 56 [1002:687f] (rev c3)
assigned to a Windows guest. After shutting down the guest, unbinding
the device from vfio-pci, and binding the device to amdgpu:
[ 548.007102] [drm:psp_hw_start [amdgpu]] *ERROR* PSP create ring failed!
[ 548.027174] [drm:psp_hw_init [amdgpu]] *ERROR* PSP firmware loading failed
[ 548.027242] [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* hw_init of IP block <psp> failed -22
[ 548.027306] amdgpu 0000:0a:00.0: amdgpu: amdgpu_device_ip_init failed
[ 548.027308] amdgpu 0000:0a:00.0: amdgpu: Fatal error during GPU init
Fixes: 2cd8b14aaa ("vfio/pci: Move to the device set infrastructure")
Fixes: eadd86f835 ("vfio: Remove calls to vfio_group_add_container_user()")
Signed-off-by: Anthony DeRossi <ajderossi@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20221110014027.28780-4-ajderossi@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The open count of a device set is the sum of the open counts of all
devices in the set. Drivers can use this value to determine whether
shared resources are in use without tracking them manually or accessing
the private open_count in vfio_device.
Signed-off-by: Anthony DeRossi <ajderossi@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20221110014027.28780-3-ajderossi@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In vfio_device_open(), vfio_device_container_register() is always called
when open_count == 1. On error, vfio_device_container_unregister() is
only called when open_count == 1 and close_device is set. This leaks a
registration for devices without a close_device implementation.
In vfio_device_fops_release(), vfio_device_container_unregister() is
called unconditionally. This can cause a device to be unregistered
multiple times.
Treating container device registration/unregistration uniformly (always
when open_count == 1) fixes both issues.
Fixes: ce4b4657ff ("vfio: Replace the DMA unmapping notifier with a callback")
Signed-off-by: Anthony DeRossi <ajderossi@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20221110014027.28780-2-ajderossi@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The memory area in each slot should be aligned to host page size.
Otherwise, the test will fail. For example, the following command
fails with the following messages with 64KB-page-size-host and
4KB-pae-size-guest. It's not user friendly to abort the test.
Lets do something to report the optimal memory slots, instead of
failing the test.
# ./memslot_perf_test -v -s 1000
Number of memory slots: 999
Testing map performance with 1 runs, 5 seconds each
Adding slots 1..999, each slot with 8 pages + 216 extra pages last
==== Test Assertion Failure ====
lib/kvm_util.c:824: vm_adjust_num_guest_pages(vm->mode, npages) == npages
pid=19872 tid=19872 errno=0 - Success
1 0x00000000004065b3: vm_userspace_mem_region_add at kvm_util.c:822
2 0x0000000000401d6b: prepare_vm at memslot_perf_test.c:273
3 (inlined by) test_execute at memslot_perf_test.c:756
4 (inlined by) test_loop at memslot_perf_test.c:994
5 (inlined by) main at memslot_perf_test.c:1073
6 0x0000ffff7ebb4383: ?? ??:0
7 0x00000000004021ff: _start at :?
Number of guest pages is not compatible with the host. Try npages=16
Report the optimal memory slots instead of failing the test when
the memory area in each slot isn't aligned to host page size. With
this applied, the optimal memory slots is reported.
# ./memslot_perf_test -v -s 1000
Number of memory slots: 999
Testing map performance with 1 runs, 5 seconds each
Memslot count too high for this test, decrease the cap (max is 514)
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020071209.559062-7-gshan@redhat.com
The addresses and sizes passed to vm_userspace_mem_region_add() and
madvise() should be aligned to host page size, which can be 64KB on
aarch64. So it's wrong by passing additional fixed 4KB memory area
to various tests.
Fix it by passing additional fixed 64KB memory area to various tests.
We also add checks to ensure that none of host/guest page size exceeds
64KB. MEM_TEST_MOVE_SIZE is fixed up to 192KB either.
With this, the following command works fine on 64KB-page-size-host and
4KB-page-size-guest.
# ./memslot_perf_test -v -s 512
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020071209.559062-6-gshan@redhat.com
The test case is obviously broken on aarch64 because non-4KB guest
page size is supported. The guest page size on aarch64 could be 4KB,
16KB or 64KB.
This supports variable guest page size, mostly for aarch64.
- The host determines the guest page size when virtual machine is
created. The value is also passed to guest through the synchronization
area.
- The number of guest pages are unknown until the virtual machine
is to be created. So all the related macros are dropped. Instead,
their values are dynamically calculated based on the guest page
size.
- The static checks on memory sizes and pages becomes dependent
on guest page size, which is unknown until the virtual machine
is about to be created. So all the static checks are converted
to dynamic checks, done in check_memory_sizes().
- As the address passed to madvise() should be aligned to host page,
the size of page chunk is automatically selected, other than one
page.
- MEM_TEST_MOVE_SIZE has fixed and non-working 64KB. It will be
consolidated in next patch. However, the comments about how
it's calculated has been correct.
- All other changes included in this patch are almost mechanical
replacing '4096' with 'guest_page_size'.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020071209.559062-5-gshan@redhat.com
prepare_vm() is called in every iteration and run. The allowed memory
slots (KVM_CAP_NR_MEMSLOTS) are probed for multiple times. It's not
free and unnecessary.
Move the probing logic for the allowed memory slots to parse_args()
for once, which is upper layer of prepare_vm().
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020071209.559062-4-gshan@redhat.com
There are two loops in prepare_vm(), which have different conditions.
'slot' is treated as meory slot index in the first loop, but index of
the host virtual address array in the second loop. It makes it a bit
hard to understand the code.
Change the usage of 'slot' in the second loop, to treat it as the
memory slot index either.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020071209.559062-3-gshan@redhat.com
In prepare_vm(), 'data->nslots' is assigned with 'max_mem_slots - 1'
at the beginning, meaning they are interchangeable.
Use 'data->nslots' isntead of 'max_mem_slots - 1'. With this, it
becomes easier to move the logic of probing number of slots into
upper layer in subsequent patches.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020071209.559062-2-gshan@redhat.com
Rename the neoverse-n2 folder to make it clear that it includes V2, and
add V2 to mapfile.csv. V2 has the same events as N2, visible by running
the following command in the ARM-software/data github repo [1]:
diff pmu/neoverse-v2.json pmu/neoverse-n2.json | grep code
Testing:
$ perf test pmu
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
[1]: https://github.com/ARM-software/data
Reviewed-by: Nick Forrington <nick.forrington@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20221020134512.1345013-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since variable npmus is unsigned int, comparing with 0 is unnecessary.
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221105135932.81612-1-tegongkang@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When converting recorded data into JSON format, perf data omits probe
variables. Add them to the output in the format "field name": "field value"
using tep_print_field:
$ perf data convert --to-json output.json
// output.json
{
"linux-perf-json-version": 1,
"headers": { ... },
"samples": [
{
"timestamp": 29182079082999,
"pid": 309194,
[...]
"__probe_ip": "0x93ee35",
"query_string_string": "select 2;",
"nxids": "0"
}
]
}
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221109103932.65675-1-9erthalion6@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support live monitoring of kernel lock contention without BPF,
it should support something like below:
# perf lock record -a -o- sleep 1 | perf lock contention -i-
contended total wait max wait avg wait type caller
2 10.27 us 6.17 us 5.13 us spinlock load_balance+0xc03
1 5.29 us 5.29 us 5.29 us rwlock:W ep_scan_ready_list+0x54
1 4.12 us 4.12 us 4.12 us spinlock smpboot_thread_fn+0x116
1 3.28 us 3.28 us 3.28 us mutex pipe_read+0x50
To do that, it needs to handle HEAD_ATTR, HEADER_EVENT_UPDATE and
HEADER_TRACING_DATA which are generated only for the pipe mode.
And setting event handler also should be delayed until it gets the
event information.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221104051440.220989-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the "mess" sorted out, we should be able to inline the
vfio_free_device call introduced by commit cb9ff3f3b8
("vfio: Add helpers for unifying vfio_device life cycle")
and remove them from driver release callbacks.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> # vfio-ap part
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-8-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that we have a reasonable separation of structs that follow
the subchannel and mdev lifecycles, there's no reason we can't
call the official vfio_alloc_device routine for our private data,
and behave like everyone else.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-7-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use set->nr_hw_queues for the current number of tags, and remove the
duplicate set->nr_hw_queues update in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221109100811.2413423-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no point in trying to share any code with the realloc case when
all that is needed by the initial tagset allocation is a simple
kcalloc_node.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221109100811.2413423-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
TP-Link routers have flash space partitioned according to the partitions
table. It may look like fixed partitioning but those partitions can be
actually reorganized. New can be added (or some removed), offsets and
sizes may change.
Fix DT to use binding for the TP-Link SafeLoader partitioning method.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20221108110708.13693-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This adds a device tree for the D-Link DIR-890L. This device
is very similar to D-Link DIR-885L, the differences are detailed
as a comment in the DTS file.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221107134104.1422169-2-linus.walleij@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
According to the commit log of the commit 3ac395a5b3 ("ARM: dts:
bcm283x: Use firmware PM driver for V3D"), the initial intent behind the
bcm2835-rpi-common DTSI was to share data between the RaspberryPies
based on the BCM2835, 36 and 37.
However, it was included by these SoCs' main DTSI. This is creating an
improper layering.
On top of that, bcm2835.dtsi is being included by bcm2711.dtsi, which
means that, even though the bcm2835-rpi-common DTSI wasn't actually
meant to contain data for the BCM2711, it actually leaks into the
BCM2711 DTSI.
In order to remove both issues, let's remove the include of
bcm2835-rpi-common.dtsi from bcm283{5-7}.dtsi and put them into the
bcm283{6,7}-rpi.dtsi.
BCM2835 has to be handled with special care due to the fact that
bcm2835.dtsi is being included by bcm2711.dtsi. Thus, we chose to
include bcm2835-rpi-common.dtsi directly into the board DTS. This will
be more error-prone, but given that it's a fairly old SoC by now, the
chance that we will get more BCM2835 boards is fairly low.
BCM2711 isn't modified since the content of bcm2835-rpi-common.dtsi was
only a power-domain for the v3d that was overridden anyway.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221026-rpi-display-fw-clk-v1-1-5c29b7a3d8b0@cerno.tech
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Commit b041b525da ("x86/split_lock: Make life miserable for split lockers")
changed the way the split lock detector works when in "warn" mode;
basically, it not only shows the warn message, but also intentionally
introduces a slowdown through sleeping plus serialization mechanism
on such task. Based on discussions in [0], seems the warning alone
wasn't enough motivation for userspace developers to fix their
applications.
This slowdown is enough to totally break some proprietary (aka.
unfixable) userspace[1].
Happens that originally the proposal in [0] was to add a new mode
which would warns + slowdown the "split locking" task, keeping the
old warn mode untouched. In the end, that idea was discarded and
the regular/default "warn" mode now slows down the applications. This
is quite aggressive with regards proprietary/legacy programs that
basically are unable to properly run in kernel with this change.
While it is understandable that a malicious application could DoS
by split locking, it seems unacceptable to regress old/proprietary
userspace programs through a default configuration that previously
worked. An example of such breakage was reported in [1].
Add a sysctl to allow controlling the "misery mode" behavior, as per
Thomas suggestion on [2]. This way, users running legacy and/or
proprietary software are allowed to still execute them with a decent
performance while still observing the warning messages on kernel log.
[0] https://lore.kernel.org/lkml/20220217012721.9694-1-tony.luck@intel.com/
[1] https://github.com/doitsujin/dxvk/issues/2938
[2] https://lore.kernel.org/lkml/87pmf4bter.ffs@tglx/
[ dhansen: minor changelog tweaks, including clarifying the actual
problem ]
Fixes: b041b525da ("x86/split_lock: Make life miserable for split lockers")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Andre Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/all/20221024200254.635256-1-gpiccoli%40igalia.com
There's enough separation between the parent and private structs now,
that it is fine to remove the release completion hack.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-6-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that the mdev parent data is split out into its own struct,
it is safe to move the remaining private data to follow the
mdev probe/remove lifecycle. The mdev parent data will remain
where it is, and follow the subchannel and the css driver
interfaces.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-5-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There's already a device initialization callback that is used to
initialize the release completion workaround that was introduced
by commit ebb72b765f ("vfio/ccw: Use the new device life cycle
helpers").
Move the other elements of the vfio_ccw_private struct that
require distinct initialization over to that routine.
With that done, the vfio_ccw_alloc_private routine only does a
kzalloc, so fold it inline.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-4-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
These places all rely on the ability to jump from a private
struct back to the subchannel struct. Rather than keeping a
copy in our back pocket, let's use the relationship provided
by the vfio_device embedded within the private.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-3-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Move the stuff associated with the mdev parent (and thus the
subchannel struct) into its own struct, and leave the rest in
the existing private structure.
The subchannel will point to the parent, and the parent will point
to the private, for the areas where one or both are needed. Further
separation of these structs will follow.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20221104142007.1314999-2-farman@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Extend recently added BOUNDED_SECTION(_name) macro by adding a
KEEP(*(.gnu.linkonce.##_name)) before the KEEP(*(_name)).
This does nothing by itself, vmlinux is the same before and after this
patch. But if a developer adds a .gnu.linkonce.foo record, that
record is placed in the front of the section, where it can be used as
a header for the table.
The intent is to create an up-link to another organizing struct, from
where related tables can be referenced. And since every item in a
table has a known offset from its header, that same offset can be used
to fetch records from the related tables.
By itself, this doesnt gain much, unless maybe the pattern of access
is to scan 1 or 2 fields in each fat record, but with 2 16 bit .map*
fields added, we could de-duplicate 2 related tables.
The use case here is struct _ddebug, which has 3 pointers (function,
file, module) with substantial repetition; respectively 53%, 90%, and
the module column is fully recoverable after dynamic_debug_init()
splits the table into a linked list of "module" chunks.
On a DYNAMIC_DEBUG=y kernel with 5k pr_debugs, the memory savings
should be ~100 KiB.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20221022225637.1406715-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
