Register the previously added packet traps with devlink. This allows
user space to tune their policers and in the case of the locked port
trap, user space can set its action to "trap" in order to gain
visibility into packets that were discarded by the device due to the
locked port check failure.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add packet traps for 802.1X operation. The "eapol" control trap is used
to trap EAPOL packets and is required for the correct operation of the
control plane. The "locked_port" drop trap can be enabled to gain
visibility into packets that were dropped by the device due to the
locked bridge port check.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reflect the 'BR_PORT_MAB' flag to device drivers so that:
* Drivers that support MAB could act upon the flag being toggled.
* Drivers that do not support MAB will prevent MAB from being enabled.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the bridge is offloaded to hardware, FDB entries are learned and
aged-out by the hardware. Some device drivers synchronize the hardware
and software FDBs by generating switchdev events towards the bridge.
When a port is locked, the hardware must not learn autonomously, as
otherwise any host will blindly gain authorization. Instead, the
hardware should generate events regarding hosts that are trying to gain
authorization and their MAC addresses should be notified by the device
driver as locked FDB entries towards the bridge driver.
Allow device drivers to notify the bridge driver about such entries by
extending the 'switchdev_notifier_fdb_info' structure with the 'locked'
bit. The bit can only be set by device drivers and not by the bridge
driver.
Prevent a locked entry from being installed if MAB is not enabled on the
bridge port.
If an entry already exists in the bridge driver, reject the locked entry
if the current entry does not have the "locked" flag set or if it points
to a different port. The same semantics are implemented in the software
data path.
Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, FDB entries that are notified to the bridge via
'SWITCHDEV_FDB_ADD_TO_BRIDGE' are always marked as offloaded. With MAB
enabled, this will no longer be universally true. Device drivers will
report locked FDB entries to the bridge to let it know that the
corresponding hosts required authorization, but it does not mean that
these entries are necessarily programmed in the underlying hardware.
Solve this by determining the offload indication based of the
'offloaded' bit in the FDB notification.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current Intel platform has an output of ~976ms interval
when probed on 1 Pulse-per-Second(PPS) hardware pin.
The correct PTP clock frequency for PCH GbE should be 204.8MHz
instead of 200MHz. PSE GbE PTP clock rate remains at 200MHz.
Fixes: 58da0cfa6c ("net: stmmac: create dwmac-intel.c to contain all Intel platform")
Signed-off-by: Ling Pei Lee <pei.lee.ling@intel.com>
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Gan Yi Fang <yi.fang.gan@intel.com>
Link: https://lore.kernel.org/r/20221108020811.12919-1-yi.fang.gan@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When failed to bind qsets in cxgb_up() for opening device, napi isn't
disabled. When open cxgb3 device next time, it will trigger a BUG_ON()
in napi_enable(). Compile tested only.
Fixes: 48c4b6dbb7 ("cxgb3 - fix port up/down error path")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109021451.121490-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When failed to create xdp rxqs or fill rx channels in cpsw_ndo_open() for
opening device, napi isn't disabled. When open cpsw device next time, it
will report a invalid opcode issue. Compiled tested only.
Fixes: d354eb85d6 ("drivers: net: cpsw: dual_emac: simplify napi usage")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109011537.96975-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable Tegra186 timer support which is needed for Tegra186, Tegra194 and
Tegra234 devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
During system resume, translate tier2 SC7 wake sources back into IRQs
and do generic_handle_irq() to invoke the interrupt handlers for edge
triggered wake events such as SW-wake.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When erofs instance is remounted with fsid or domain_id mount option
specified, the original fsid and domain_id string pointer in sbi->opt
is directly overridden with the fsid and domain_id string in the new
fs_context, without freeing the original fsid and domain_id string.
What's worse, when the new fsid and domain_id string is transferred to
sbi, they are not reset to NULL in fs_context, and thus they are freed
when remount finishes, while sbi is still referring to these strings.
Reconfiguration for fsid and domain_id seems unusual. Thus clarify this
restriction explicitly and dump a warning when users are attempting to
do this.
Besides, to fix the use-after-free issue, move fsid and domain_id from
erofs_mount_opts to outside.
Fixes: c6be2bd0a5 ("erofs: register fscache volume")
Fixes: 8b7adf1dff ("erofs: introduce fscache-based domain")
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20221021023153.1330-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
When a wake event is defined to be triggered on both positive and
negative edge of the input wake signal, it is crucial to know the
current state of the signal when going into suspend. The intended way to
obtain the current state of the wake signals is to read the
WAKE_AOWAKE_SW_STATUS register, which should contains the raw state of
the wake signals.
However, this register is edge triggered, an edge will not be generated
for signals that are already asserted prior to the assertion of
WAKE_LATCH_SW.
To workaround this, change the polarity of the wake level from '0' to
'1' while latching the signals, as this will generate an edge for
signals that are set to '1'.
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add I/O pad table for Tegra234 to allow configuring DPD mode and
switching the pins to 1.8V or 3.3V as needed.
On Tegra234, DPD registers are reorganized such that there is a DPD_REQ
register and a DPD_STATUS register per pad group. Update the PMC driver
accordingly.
While at it, use the generated tables from tegra-pinmux-scripts to make
the formatting of these tables more consistent.
Signed-off-by: Petlozu Pravareshwar <petlozup@nvidia.com>
[treding@nvidia.com: generate tables from tegra-pinmux-scripts]
Signed-off-by: Thierry Reding <treding@nvidia.com>
iova_bitmap_set() doesn't consider the end of the page boundary when the
first bitmap page offset isn't zero, and wrongly changes the consecutive
page right after. Consequently this leads to missing dirty pages from
reported by the device as seen from the VMM.
The current logic iterates over a given number of base pages and clamps it
to the remaining indexes to iterate in the last page. Instead of having to
consider extra pages to pin (e.g. first and extra pages), just handle the
first page as its own range and let the rest of the bitmap be handled as if
it was base page aligned.
This is done by changing iova_bitmap_mapped_remaining() to return PAGE_SIZE
- pgoff (on the first bitmap page), and leads to pgoff being set to 0 on
following iterations.
Fixes: 58ccf0190d ("vfio: Add an IOVA bitmap support")
Reported-by: Avihai Horon <avihaih@nvidia.com>
Tested-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20221025193114.58695-3-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
kzalloc/kzfree are used so include `slab.h`. While it happens to work
without it, due to commit 8b9f3ac5b0 ("fs: introduce alloc_inode_sb() to
allocate filesystems specific inode") which indirectly includes via:
. ./include/linux/mm.h
.. ./include/linux/huge_mm.h
... ./include/linux/fs.h
.... ./include/linux/slab.h
Make it explicit should any of its indirect dependencies be dropped/changed
for entirely different reasons as it was the cause prior to commit above
recently (i.e. <= v5.18).
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20221025193114.58695-2-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The ACPI _RST method has no return value, there's no need to pass a return
buffer to acpi_evaluate_object().
Fixes: d30daa33ec ("vfio: platform: call _RST method when using ACPI")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20221018152825.891032-1-rafaelmendsr@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since pci provides the helper macro module_pci_driver(), we may replace
the module_init/exit with it.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220922123507.11222-1-shangxiaojing@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, we are calling fill_dc_dirty_rects() even if PSR isn't
supported by the relevant link in amdgpu_dm_commit_planes(), this is
undesirable especially because when drm.debug is enabled we are printing
messages in fill_dc_dirty_rects() that are only useful for debugging PSR
(and confusing otherwise). So, we can instead limit the filling of dirty
rectangles to only when PSR is enabled.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-take the eviction lock immediately again after the allocation is
completed, to fix circular locking warning with drm_buddy allocator.
Move amdgpu_vm_eviction_lock/unlock/trylock to amdgpu_vm.h as they are
called from multiple files.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get below kernel WARNING backtrace when pressing ctrl-C to kill kfdtest
application.
If amdgpu_cs_parser_bos returns error after taking bo_list_mutex, as
caller amdgpu_cs_ioctl will not unlock bo_list_mutex, this generates the
kernel WARNING.
Add unlock bo_list_mutex after amdgpu_cs_parser_bos error handling to
cleanup bo_list userptr bo.
WARNING: kfdtest/2930 still has locks held!
1 lock held by kfdtest/2930:
(&list->bo_list_mutex){+.+.}-{3:3}, at: amdgpu_cs_ioctl+0xce5/0x1f10 [amdgpu]
stack backtrace:
dump_stack_lvl+0x44/0x57
get_signal+0x79f/0xd00
arch_do_signal_or_restart+0x36/0x7b0
exit_to_user_mode_prepare+0xfd/0x1b0
syscall_exit_to_user_mode+0x19/0x40
do_syscall_64+0x40/0x80
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4545ae2ed3.
The origin patch "drm/amdgpu: getting fan speed pwm for vega10 properly" works fine.
Test failure is caused by test case self.
Signed-off-by: Asher Song <Asher.Song@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Data return times when using lowest memclk can be <= 60us, which can cause
underflow on high bandwidth displays with a workload.
[HOW?]
Enforce a minimum prefetch time during validation for low memclk modes.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1. Port of gpio has different mapping.
[How]
1. Add a dummy entry in mapping table.
2. Fix incorrect mask bit field access.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Steve Su <steve.su@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The link enablement sequence can end up resetting the encoder while
the PHY symclk isn't yet on.
This means that waiting for symclk on will timeout, along with the reset
bit never asserting high.
This causes unnecessary delay when enabling the link and produces a
warning affecting multiple IGT tests.
[How]
Don't wait for the symclk to be on here because firmware already does.
Don't wait for reset if we know the symclk isn't on.
Split the reset into a helper function that checks the bit and decides
whether or not a delay is sufficient.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
[Why]
Recent backports from open source do not have header inclusion pattern
that is consistent with inclusion style in the rest of the file. This
breaks the internal tool builds as well. A recent commit erronously
modified the original DML formula for calculating
ActiveClockChangeLatencyHidingY. This resulted in a FCLK deviation
from the golden values.
[How]
Change the way in which display_mode_vba.h is included so that it is
consistent with the inclusion style in rest of the file which also fixes
the tool build. Restore the DML formula to its original state to fix the
FCLK deviation.
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Bug was caused when moving variable from stack to heap because it was reusable
and garbage was left over, so we need to zero mem.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
New values requested by hardware after fine-tuning.
Update for all memory types.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
It can happen that we query the sequence value before the callback
had a chance to run.
Workaround that by grabbing the fence lock and releasing it again.
Should be replaced by hw handling soon.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org # 5.19+
Fixes: 5255e146c9 ("drm/amdgpu: rework TLB flushing")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2113
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Stefan Springer <stefanspr94@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Checkpoint BOs last. That way we don't need to close dmabuf FDs if
something else fails later. This avoids problematic access to user mode
memory in the error handling code path.
criu_checkpoint_bos has its own error handling and cleanup that does not
depend on access to user memory.
In the private data, keep BOs before the remaining objects. This is
necessary to restore things in the correct order as restoring events
depends on the events-page BO being restored first.
Fixes: be072b06c7 ("drm/amdkfd: CRIU export BOs as prime dmabuf objects")
Reported-by: Jann Horn <jannh@google.com>
CC: Rajneesh Bhardwaj <Rajneesh.Bhardwaj@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
When pci_create_attr() fails, pci_remove_resource_files() is called which
will iterate over the res_attr[_wc] arrays and frees every non NULL entry.
To avoid a double free here set the array entry only after it's clear we
successfully initialized it.
Fixes: b562ec8f74 ("PCI: Don't leak memory if sysfs_create_bin_file() fails")
Link: https://lore.kernel.org/r/20221007070735.GX986@pengutronix.de/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
mutex_unlock before the exit label because all the error code paths that
jump there didn't take that lock. This fixes unbalanced locking errors
in case of restore errors.
Fixes: 40e8a766a7 ("drm/amdkfd: CRIU checkpoint and restore events")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Some of the unused messages that were used earlier in development have
been freed up as spare messages, no intended functional changes.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
The same BO may need different MTYPEs and SNOOP flags in PTEs depending
on its current location relative to the mapping GPU. Setting MTYPEs from
clients ahead of time is not practical for coherent memory sharing.
Instead determine the correct MTYPE for the desired coherence model and
current BO location when updating the page tables.
To maintain backwards compatibility with MTYPE-selection in
AMDGPU_VA_OP_MAP, the coherence-model-based MTYPE selection is only
applied if it chooses an MTYPE other than MTYPE_NC (the default).
Add two AMDGPU_GEM_CREATE_... flags to indicate the coherence model. The
default if no flag is specified is non-coherent (i.e. coarse-grained
coherent at dispatch boundaries).
Update amdgpu_amdkfd_gpuvm.c to use this new method to choose the
correct MTYPE depending on the current memory location.
v2:
* check that bo is not NULL (e.g. PRT mappings)
* Fix missing ~ bitmask in gmc_v11_0.c
v3:
* squash in "drm/amdgpu: Inherit coherence flags on dmabuf import"
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we are calling fill_dc_dirty_rects() even if PSR isn't
supported by the relevant link in amdgpu_dm_commit_planes(), this is
undesirable especially because when drm.debug is enabled we are printing
messages in fill_dc_dirty_rects() that are only useful for debugging PSR
(and confusing otherwise). So, we can instead limit the filling of dirty
rectangles to only when PSR is enabled.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In dcn*_clock_source_create when dcn*_clk_src_construct fails allocated
clk_src needs release. A local attack could use this to cause memory
exhaustion.
Signed-off-by: LongJun Tang <tanglongjun@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in structs _ATOM_GPIO_PIN_ASSIGNMENT,
_ATOM_DISPLAY_OBJECT_PATH, _ATOM_DISPLAY_OBJECT_PATH_TABLE,
_ATOM_OBJECT_TABLE and refactor the rest of the code accordingly.
Important to mention is that doing a build before/after this patch results
in no functional binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/238
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the radeon driver reads the bios information from ACPI
table in radeon_acpi_vfct_bios(), it misses to call acpi_put_table()
to release the ACPI memory after the init, so add acpi_put_table()
properly to fix the memory leak.
v2: fix text formatting (Alex)
Fixes: 268ba0a99f ("drm/radeon: implement ACPI VFCT vbios fetch (v3)")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
change guarantees that gfxoff is allowed before moving further in
s2idle sequence to add more reliablity about gfxoff in amdgpu IP's
suspend flow
Signed-off-by: Harsh Jain <harsh.jain@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Abstract RAS I2C EEPROM addresses from chip names, and set their macro
definition names to the address they set, not the chip they attach
to. Since most chips either use I2C EEPROM address 0 or 40000h for the RAS
table start offset, this leaves us with only two macro definitions as
opposed to five, and removes the redundancy of four.
Cc: Candice Li <candice.li@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove redundant EEPROM_I2C_MADDR_54H address, since we already have it
represented (ARCTURUS), and since we don't include the I2C device type
identifier in EEPROM memory addresses, i.e. that high up in the device
abstraction--we only use EEPROM memory addresses, as memory is continuously
represented by EEPROM device(s) on the I2C bus.
Add a comment describing what these memory addresses are, how they come
about and how they're usually extracted from the device address byte.
Cc: Candice Li <candice.li@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Fixes: c9bdc6c3cf ("drm/amdgpu: Add EEPROM I2C address support for ip discovery")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_fill_cache_non_crat_info() is only used in kfd_topology.c,
so make it as static.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable mode1 reset and prioritize debug port on smu_v13_0_10
as a more reliable message processing
v2 - move mode1 reset callback to smu_v13_0_0_ppt.c
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the memory overrun issue caused by wrong array size.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527133 ("Memory - corruptions")
Fixes: c0cc999f3c ("drm/amdkfd: Fix the warning of array-index-out-of-bounds")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-take the eviction lock immediately again after the allocation is
completed, to fix circular locking warning with drm_buddy allocator.
Move amdgpu_vm_eviction_lock/unlock/trylock to amdgpu_vm.h as they are
called from multiple files.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get below kernel WARNING backtrace when pressing ctrl-C to kill kfdtest
application.
If amdgpu_cs_parser_bos returns error after taking bo_list_mutex, as
caller amdgpu_cs_ioctl will not unlock bo_list_mutex, this generates the
kernel WARNING.
Add unlock bo_list_mutex after amdgpu_cs_parser_bos error handling to
cleanup bo_list userptr bo.
WARNING: kfdtest/2930 still has locks held!
1 lock held by kfdtest/2930:
(&list->bo_list_mutex){+.+.}-{3:3}, at: amdgpu_cs_ioctl+0xce5/0x1f10 [amdgpu]
stack backtrace:
dump_stack_lvl+0x44/0x57
get_signal+0x79f/0xd00
arch_do_signal_or_restart+0x36/0x7b0
exit_to_user_mode_prepare+0xfd/0x1b0
syscall_exit_to_user_mode+0x19/0x40
do_syscall_64+0x40/0x80
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC version 3.2.211 brings along the following fixes:
- Wait for VBLANK during pipe programming
- Adding HDMI SCDC DEVICE_ID define
- Cursor update refactor: PSR-SU support condition
- Update 709 gamma to 2.222 as stated in the standerd
- Consider dp cable id only when data is non zero
- Waiting for 1 frame to fix the flash issue on PSR1
- Update SR watermarks for DCN314
- Allow tuning DCN314 bounding box
- Zeromem mypipe heap struct before using it
- Use min transition for SubVP into MPO
- Disable phantom OTG after enable for plane disable
- Disable DRR actions during state commit
- Fix fallback issues for DP LL 1.4a tests
- Fix FCLK deviation and tool compile issues
- Fix reg timeout in enc314_enable_fifo
- Fix gpio port mapping issue
- Only update link settings after successful MST link train
- Enforce minimum prefetch time for low memclk on DCN32
- Set correct EOTF and Gamut flag in VRR info
- Add margin for max vblank time for SubVP + DRR
- Populate DP2.0 output type for DML pipe
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4545ae2ed3.
The origin patch "drm/amdgpu: getting fan speed pwm for vega10 properly" works fine.
Test failure is caused by test case self.
Signed-off-by: Asher Song <Asher.Song@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
