When the mac device gets removed, it leaves behind the ethernet device.
This will result in a segfault next time the ethernet device accesses
mac_dev. Remove the ethernet device when we get removed to prevent
this. This is not completely reversible, since some resources aren't
cleaned up properly, but that can be addressed later.
Fixes: 3933961682 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20221103182831.2248833-1-sean.anderson@seco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/net/ethernet/renesas/rswitch.c:1533:20: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = rswitch_start_xmit,
^~~~~~~~~~~~~~~~~~
1 error generated.
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of rswitch_start_xmit()
to match the prototype's to resolve the warning and CFI failure.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221103220032.2142122-1-nathan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: Bug fixes
This bug fix series includes fixes for PCIE AER, a crash that may occur
when doing ethtool -C in the middle of error recovery, and aRFS.
====================
Link: https://lore.kernel.org/r/1667518407-15761-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the bnxt_en driver ndo_rx_flow_steer returns '0' whenever an entry
that we are attempting to steer is already found. This is not the
correct behavior. The return code should be the value/index that
corresponds to the entry. Returning zero all the time causes the
RFS records to be incorrect unless entry '0' is the correct one. As
flows migrate to different cores this can create entries that are not
correct.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: Akshay Navgire <anavgire@purestorage.com>
Signed-off-by: Alex Barba <alex.barba@broadcom.com>
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the sequence required for PCIE-AER. While slot reset occurs, firmware
might not be ready and the driver needs to check for its recovery. We
also need to remap the health registers for some chips and clear the
resource reservations. The resources will be allocated again during
bnxt_io_resume().
Fixes: fb1e6e562b ("bnxt_en: Fix AER recovery.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce bnxt_clear_reservations() to clear the reserved attributes only.
This will be used in the next patch to fix PCI AER handling.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now ip_metrics_convert() is only called by ip_fib_metrics_init(). Before
ip_fib_metrics_init() invokes ip_metrics_convert(), it checks whether
input parameter fc_mx is NULL. Therefore, ip_metrics_convert() doesn't
need to check fc_mx.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221104022513.168868-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 54cc3dbfc1.
Zev Weiss reports that the reverted patch may cause a regulator
undercount. Here is his report:
... having regulator-dummy set as a supply on my PMBus regulators
(instead of having them as their own top-level regulators without
an upstream supply) leads to enable-count underflow errors when
disabling them:
# echo 0 > /sys/bus/platform/devices/efuse01/state
[ 906.094477] regulator-dummy: Underflow of regulator enable count
[ 906.100563] Failed to disable vout: -EINVAL
[ 136.992676] reg-userspace-consumer efuse01: Failed to configure state: -22
Zev reports that reverting the patch fixes the problem. So let's do that
for now.
Fixes: 54cc3dbfc1 ("hwmon: (pmbus) Add regulator supply into macro")
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Reported-by: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Available sensors are enumerated and reported by the SCMI platform server
using a 16bit identification number; not all such sensors are of a type
supported by hwmon subsystem and, among the supported ones, only a subset
could be temperature sensors that have to be registered with the Thermal
Framework.
Potential clashes between hwmon channels indexes and the underlying real
sensors IDs do not play well with the hwmon<-->thermal bridge automatic
registration routines and could need a sensible number of fake dummy
sensors to be made up in order to keep indexes and IDs in sync.
Avoid to use the hwmon<-->thermal bridge dropping the HWMON_C_REGISTER_TZ
attribute and instead explicit register temperature sensors directly with
the Thermal Framework.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221031114018.59048-1-cristian.marussi@arm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sphinx reported unknown target warning:
Documentation/bpf/bpf_design_QA.rst:329: WARNING: Unknown target name: "bpf".
The warning is caused by BPF type name prefix ("bpf_") which is written
without escaping the trailing underscore.
Escape the underscore to fix the warning. While at it, wrap the
containing paragraph in less than 80 characters.
Fixes: 9805af8d8a ("bpf: Document UAPI details for special BPF types")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20221104123913.50610-1-bagasdotme@gmail.com
At region creation time the next region-id is atomically cached so that
there is predictability of region device names. If that region is
destroyed and then a new one is created the region id increments. That
ends up looking like a memory leak, or is otherwise surprising that
identifiers roll forward even after destroying all previously created
regions.
Try to reuse rather than free old region ids at region release time.
While this fixes a cosmetic issue, the needlessly advancing memory
region-id gives the appearance of a memory leak, hence the "Fixes" tag,
but no "Cc: stable" tag.
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 779dd20cfb ("cxl/region: Add region creation support")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752186062.947915.13200195701224993317.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When programming port decode targets, the algorithm wants to ensure that
two devices are compatible to be programmed as peers beneath a given
port. A compatible peer is a target that shares the same dport, and
where that target's interleave position also routes it to the same
dport. Compatibility is determined by the device's interleave position
being >= to distance. For example, if a given dport can only map every
Nth position then positions less than N away from the last target
programmed are incompatible.
The @distance for the host-bridge's cxl_port in a simple dual-ported
host-bridge configuration with 2 direct-attached devices is 1, i.e. An
x2 region divided by 2 dports to reach 2 region targets.
An x4 region under an x2 host-bridge would need 2 intervening switches
where the @distance at the host bridge level is 2 (x4 region divided by
2 switches to reach 4 devices).
However, the distance between peers underneath a single ported
host-bridge is always zero because there is no limit to the number of
devices that can be mapped. In other words, there are no decoders to
program in a passthrough, all descendants are mapped and distance only
starts matters for the intervening descendant ports of the passthrough
port.
Add tracking for the number of dports mapped to a port, and use that to
detect the passthrough case for calculating @distance.
Cc: <stable@vger.kernel.org>
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com
Fixes: 27b3f8d138 ("cxl/region: Program target lists")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752185440.947915.6617495912508299445.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When a cxl_nvdimm object goes through a ->remove() event (device
physically removed, nvdimm-bridge disabled, or nvdimm device disabled),
then any associated regions must also be disabled. As highlighted by the
cxl-create-region.sh test [1], a single device may host multiple
regions, but the driver was only tracking one region at a time. This
leads to a situation where only the last enabled region per nvdimm
device is cleaned up properly. Other regions are leaked, and this also
causes cxl_memdev reference leaks.
Fix the tracking by allowing cxl_nvdimm objects to track multiple region
associations.
Cc: <stable@vger.kernel.org>
Link: https://github.com/pmem/ndctl/blob/main/test/cxl-create-region.sh [1]
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Fixes: 04ad63f086 ("cxl/region: Introduce cxl_pmem_region objects")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752183647.947915.2045230911503793901.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When a region is deleted any targets that have been previously assigned
to that region hold references to it. Trigger those references to
drop by detaching all targets at unregister_region() time.
Otherwise that region object will leak as userspace has lost the ability
to detach targets once region sysfs is torn down.
Cc: <stable@vger.kernel.org>
Fixes: b9686e8c8e ("cxl/region: Enable the assignment of endpoint decoders to regions")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752183055.947915.17681995648556534844.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some regions may not have any address space allocated. Skip them when
validating HPA order otherwise a crash like the following may result:
devm_cxl_add_region: cxl_acpi cxl_acpi.0: decoder3.4: created region9
BUG: kernel NULL pointer dereference, address: 0000000000000000
[..]
RIP: 0010:store_targetN+0x655/0x1740 [cxl_core]
[..]
Call Trace:
<TASK>
kernfs_fop_write_iter+0x144/0x200
vfs_write+0x24a/0x4d0
ksys_write+0x69/0xf0
do_syscall_64+0x3a/0x90
store_targetN+0x655/0x1740:
alloc_region_ref at drivers/cxl/core/region.c:676
(inlined by) cxl_port_attach_region at drivers/cxl/core/region.c:850
(inlined by) cxl_region_attach at drivers/cxl/core/region.c:1290
(inlined by) attach_target at drivers/cxl/core/region.c:1410
(inlined by) store_targetN at drivers/cxl/core/region.c:1453
Cc: <stable@vger.kernel.org>
Fixes: 384e624bb2 ("cxl/region: Attach endpoint decoders")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166752182461.947915.497032805239915067.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
lld produces "fast" style build-ids by default, which is inconsistent
with ld's "sha1" style. Explicitly specify build-id style to be "sha1"
when linking liburandom_read.so the same way it is already done for
urandom_read.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20221104094016.102049-1-asavkov@redhat.com
Copy libbpf_strlcpy() from libbpf_internal.h to bpf_util.h, and rename it
to bpf_strlcpy(), then replace selftests strncpy()/libbpf_strlcpy() with
bpf_strlcpy(), fix compile warning.
The libbpf_internal.h header cannot be used directly here, because
references to cgroup_helpers.c in samples/bpf will generate compilation
errors. We also can't add libbpf_strlcpy() directly to bpf_util.h,
because the definition of libbpf_strlcpy() in libbpf_internal.h is
duplicated. In order not to modify the libbpf code, add a new function
bpf_strlcpy() to selftests bpf_util.h.
How to reproduce this compilation warning:
$ make -C samples/bpf
cgroup_helpers.c: In function ‘__enable_controllers’:
cgroup_helpers.c:80:17: warning: ‘strncpy’ specified bound 4097 equals destination size [-Wstringop-truncation]
80 | strncpy(enable, controllers, sizeof(enable));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/tencent_469D8AF32BD56816A29981BED06E96D22506@qq.com
The new Asynchronous Exit (AEX) notification mechanism (AEX-notify)
allows one enclave to receive a notification in the ERESUME after the
enclave exit due to an AEX. EDECCSSA is a new SGX user leaf function
(ENCLU[EDECCSSA]) to facilitate the AEX notification handling. The new
EDECCSSA is enumerated via CPUID(EAX=0x12,ECX=0x0):EAX[11].
Besides Allowing reporting the new AEX-notify attribute to KVM guests,
also allow reporting the new EDECCSSA user leaf function to KVM guests
so the guest can fully utilize the AEX-notify mechanism.
Similar to existing X86_FEATURE_SGX1 and X86_FEATURE_SGX2, introduce a
new scattered X86_FEATURE_SGX_EDECCSSA bit for the new EDECCSSA, and
report it in KVM's supported CPUIDs.
Note, no additional KVM enabling is required to allow the guest to use
EDECCSSA. It's impossible to trap ENCLU (without completely preventing
the guest from using SGX). Advertise EDECCSSA as supported purely so
that userspace doesn't need to special case EDECCSSA, i.e. doesn't need
to manually check host CPUID.
The inability to trap ENCLU also means that KVM can't prevent the guest
from using EDECCSSA, but that virtualization hole is benign as far as
KVM is concerned. EDECCSSA is simply a fancy way to modify internal
enclave state.
More background about how do AEX-notify and EDECCSSA work:
SGX maintains a Current State Save Area Frame (CSSA) for each enclave
thread. When AEX happens, the enclave thread context is saved to the
CSSA and the CSSA is increased by 1. For a normal ERESUME which doesn't
deliver AEX notification, it restores the saved thread context from the
previously saved SSA and decreases the CSSA. If AEX-notify is enabled
for one enclave, the ERESUME acts differently. Instead of restoring the
saved thread context and decreasing the CSSA, it acts like EENTER which
doesn't decrease the CSSA but establishes a clean slate thread context
using the CSSA for the enclave to handle the notification. After some
handling, the enclave must discard the "new-established" SSA and switch
back to the previously saved SSA (upon AEX). Otherwise, the enclave
will run out of SSA space upon further AEXs and eventually fail to run.
To solve this problem, the new EDECCSSA essentially decreases the CSSA.
It can be used by the enclave notification handler to switch back to the
previous saved SSA when needed, i.e. after it handles the notification.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/all/20221101022422.858944-1-kai.huang%40intel.com
Short Version:
Allow enclaves to use the new Asynchronous EXit (AEX)
notification mechanism. This mechanism lets enclaves run a
handler after an AEX event. These handlers can run mitigations
for things like SGX-Step[1].
AEX Notify will be made available both on upcoming processors and
on some older processors through microcode updates.
Long Version:
== SGX Attribute Background ==
The SGX architecture includes a list of SGX "attributes". These
attributes ensure consistency and transparency around specific
enclave features.
As a simple example, the "DEBUG" attribute allows an enclave to
be debugged, but also destroys virtually all of SGX security.
Using attributes, enclaves can know that they are being debugged.
Attributes also affect enclave attestation so an enclave can, for
instance, be denied access to secrets while it is being debugged.
The kernel keeps a list of known attributes and will only
initialize enclaves that use a known set of attributes. This
kernel policy eliminates the chance that a new SGX attribute
could cause undesired effects.
For example, imagine a new attribute was added called
"PROVISIONKEY2" that provided similar functionality to
"PROVISIIONKEY". A kernel policy that allowed indiscriminate use
of unknown attributes and thus PROVISIONKEY2 would undermine the
existing kernel policy which limits use of PROVISIONKEY enclaves.
== AEX Notify Background ==
"Intel Architecture Instruction Set Extensions and Future
Features - Version 45" is out[2]. There is a new chapter:
Asynchronous Enclave Exit Notify and the EDECCSSA User Leaf Function.
Enclaves exit can be either synchronous and consensual (EEXIT for
instance) or asynchronous (on an interrupt or fault). The
asynchronous ones can evidently be exploited to single step
enclaves[1], on top of which other naughty things can be built.
AEX Notify will be made available both on upcoming processors and
on some older processors through microcode updates.
== The Problem ==
These attacks are currently entirely opaque to the enclave since
the hardware does the save/restore under the covers. The
Asynchronous Enclave Exit Notify (AEX Notify) mechanism provides
enclaves an ability to detect and mitigate potential exposure to
these kinds of attacks.
== The Solution ==
Define the new attribute value for AEX Notification. Ensure the
attribute is cleared from the list reserved attributes. Instead
of adding to the open-coded lists of individual attributes,
add named lists of privileged (disallowed by default) and
unprivileged (allowed by default) attributes. Add the AEX notify
attribute as an unprivileged attribute, which will keep the kernel
from rejecting enclaves with it set.
1. https://github.com/jovanbulck/sgx-step
2. https://cdrdv2.intel.com/v1/dl/getContent/671368?explicitVersion=true
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Haitao Huang <haitao.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20220720191347.1343986-1-dave.hansen%40linux.intel.com
The dispatcher function is currently abusing the ftrace __fentry__
call location for its own purposes -- this obviously gives trouble
when the dispatcher and ftrace are both in use.
A previous solution tried using __attribute__((patchable_function_entry()))
which works, except it is GCC-8+ only, breaking the build on the
earlier still supported compilers. Instead use static_call() -- which
has its own annotations and does not conflict with ftrace -- to
rewrite the dispatch function.
By using: return static_call()(ctx, insni, bpf_func) you get a perfect
forwarding tail call as function body (iow a single jmp instruction).
By having the default static_call() target be bpf_dispatcher_nop_func()
it retains the default behaviour (an indirect call to the argument
function). Only once a dispatcher program is attached is the target
rewritten to directly call the JIT'ed image.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lkml.kernel.org/r/Y1/oBlK0yFk5c/Im@hirez.programming.kicks-ass.net
Link: https://lore.kernel.org/bpf/20221103120647.796772565@infradead.org
Because __attribute__((patchable_function_entry)) is only available
since GCC-8 this solution fails to build on the minimum required GCC
version.
Undo these changes so we might try again -- without cluttering up the
patches with too many changes.
This is an almost complete revert of:
dbe69b2998 ("bpf: Fix dispatcher patchable function entry to 5 bytes nop")
ceea991a01 ("bpf: Move bpf_dispatcher function out of ftrace locations")
(notably the arch/x86/Kconfig hunk is kept).
Reported-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lkml.kernel.org/r/439d8dc735bb4858875377df67f1b29a@AcuMS.aculab.com
Link: https://lore.kernel.org/bpf/20221103120647.728830733@infradead.org
- Fix a UAF bug during log recovery.
- Fix memory leaks when mount fails.
- Detect corrupt bestfree information in a directory block.
- Fix incorrect return value type for the dax page fault handlers.
- Fix fortify complaints about memcpy of xfs log item objects.
- Strengthen inadequate validation of recovered log items.
- Fix incorrectly declared flex array in EFI log item structs.
- Log corrupt log items for debugging purposes.
- Fix infinite loop problems in the refcount code if the refcount btree
node block keys are corrupt.
- Fix infinite loop problems in the refcount code if the refcount btree
records suffer MSB bitflips.
- Add more sanity checking to continued defer ops to prevent overflows
from one AG to the next or off EOFS.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmNhT68ACgkQ+H93GTRK
tOs5Bw/+NSyPZ7jYVa3mXYKRsqMU/nqAGnNK4D4uS8gRlJTBolpC8Vs4fpBTQzV8
3JN8F/AUIQJOCxt5a81tlsPSYgEsxuIqion1olh3Z6ln4wN0su3rj0E3h+CTtgV8
xf3axdre4uC2xYhmKiDTD4ezLqylnRmsK1nNLbFzRnnJrYN+FiiJB7BefuJkbEzI
HRTAJPo3oxsCDinkkyQhZ8CjD7ZenYuhgc4jFmVSLqNjULkF2kDyHgLCfojq+p3E
G6WsuJ9fonMXlt2WV7k3tKektHIll8+ile6+zuPSjOH+WHo4/jWIjvUsg0X+M3DS
jemPFNgpS6jSJy3qbPJoDej8XlV0FV4VzsCh2a/YaGa1Outl8V9ZhMyt9tc8LWzF
3Z1KkywsBqzK9m9yDlokmGPq71kCEQ+OMQSSlELEf6q7HHUf6yr3MyA5tXKqzJod
DYFYoX70EoPAKk47gFI5EIYrzuTFx7PRugUUSU09e0wmjSswH7RjNur+Ya1eHhYc
VUe6gUluuAkTFHhEjk+8mTg1iUlg92YdzL7pKSoeAlQczz1ZwQhE9W0ul1/z07d4
F4DXi6CtmM38e7XsX0CKmZ0ins9QmSDJheCKmE3kdLYY9PpzQpgtlq4kqjUP5eJw
XZwB6cUS4pXw2zf4tW1qQ5pe13umfN6/VqymagG4fKWfAwj8s9o=
=1IfG
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.1-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Dave and I had thought that this would be a very quiet cycle, but we
thought wrong.
At first there were the usual trickle of minor bugfixes, but then
Zorro pulled -rc1 and noticed complaints about the stronger memcpy
checks w.r.t. flex arrays.
Analyzing how to fix that revealed a bunch of validation gaps in
validating ondisk log items during recovery, and then a customer hit
an infinite loop in the refcounting code on a corrupt filesystem.
So. This largeish batch of fixes addresses all those problems, I hope.
Summary:
- Fix a UAF bug during log recovery
- Fix memory leaks when mount fails
- Detect corrupt bestfree information in a directory block
- Fix incorrect return value type for the dax page fault handlers
- Fix fortify complaints about memcpy of xfs log item objects
- Strengthen inadequate validation of recovered log items
- Fix incorrectly declared flex array in EFI log item structs
- Log corrupt log items for debugging purposes
- Fix infinite loop problems in the refcount code if the refcount
btree node block keys are corrupt
- Fix infinite loop problems in the refcount code if the refcount
btree records suffer MSB bitflips
- Add more sanity checking to continued defer ops to prevent
overflows from one AG to the next or off EOFS"
* tag 'xfs-6.1-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
xfs: rename XFS_REFC_COW_START to _COWFLAG
xfs: fix uninitialized list head in struct xfs_refcount_recovery
xfs: fix agblocks check in the cow leftover recovery function
xfs: check record domain when accessing refcount records
xfs: remove XFS_FIND_RCEXT_SHARED and _COW
xfs: refactor domain and refcount checking
xfs: report refcount domain in tracepoints
xfs: track cow/shared record domains explicitly in xfs_refcount_irec
xfs: refactor refcount record usage in xchk_refcountbt_rec
xfs: dump corrupt recovered log intent items to dmesg consistently
xfs: move _irec structs to xfs_types.h
xfs: actually abort log recovery on corrupt intent-done log items
xfs: check deferred refcount op continuation parameters
xfs: refactor all the EFI/EFD log item sizeof logic
xfs: create a predicate to verify per-AG extents
xfs: fix memcpy fortify errors in EFI log format copying
xfs: make sure aglen never goes negative in xfs_refcount_adjust_extents
xfs: fix memcpy fortify errors in RUI log format copying
xfs: fix memcpy fortify errors in CUI log format copying
xfs: fix memcpy fortify errors in BUI log format copying
...
since commit c504e5c2f964("net: skb: introduce kfree_skb_reason()")
kfree_skb() is replaced by kfree_skb_reason() and kfree_skb() is set to
the inline function. So, we replace kprobe/kfree_skb with
kprobe/kfree_skb_reason to solve the tracex2 error.
$ cd samples/bpf
$ sudo ./tracex2
libbpf: prog 'bpf_prog2': failed to create kprobe 'kfree_skb+0x0' perf event: No such file or directory
ERROR: bpf_program__attach failed
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/tencent_0F0DAE84C0B3C42E0B550E5E9F47A9114D09@qq.com
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCY2VLRRAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSejwBAMOIza4vHY0nL5a+C6jQGBjEdueSic8m4K8P
cOOHEn3AAP44Bf1skIMIrgOL7VE+aGCJoIYWiN+rs/tBKYyPnO0gBQ==
=gW7y
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"Fix the test build for some distros"
* tag 'landlock-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Build without static libraries
- A pair of tweaks to the EFI random seed code so that externally
provided version of this config table are handled more robustly
- Another fix for the v6.0 EFI variable refactor that turned out to
break Apple machines which don't provide QueryVariableInfo()
- Add some guard rails to the EFI runtime service call wrapper so we can
recover from synchronous exceptions caused by firmware
-----BEGIN PGP SIGNATURE-----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=fjxs
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- A pair of tweaks to the EFI random seed code so that externally
provided version of this config table are handled more robustly
- Another fix for the v6.0 EFI variable refactor that turned out to
break Apple machines which don't provide QueryVariableInfo()
- Add some guard rails to the EFI runtime service call wrapper so we
can recover from synchronous exceptions caused by firmware
* tag 'efi-fixes-for-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Recover from synchronous exceptions occurring in firmware
efi: efivars: Fix variable writes with unsupported query_variable_store()
efi: random: Use 'ACPI reclaim' memory for random seed
efi: random: reduce seed size to 32 bytes
efi/tpm: Pass correct address to memblock_reserve
There are not a lot of important fixes for the soc tree yet this
time, but it's time to upstream what I got so far:
- DT Fixes for Arm Juno and ST-Ericsson Ux500 to add missing critical
temperature points
- A number of fixes for the Arm SCMI firmware, addressing correctness
issues in the code, in particular error handling and resource leaks.
- One error handling fix for the new i.MX93 power domain driver
- Several devicetree fixes for NXP i.MX6/8/9 and Layerscape chips,
fixing incorrect or missing DT properties for MDIO controller nodes,
CPLD, USB and regulators for various boards, as well as some
fixes for DT schema checks.
- MAINTAINERS file updates for HiSilicon LPC Bus and Broadcom git URLs
-----BEGIN PGP SIGNATURE-----
iQIyBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmNk+VsACgkQmmx57+YA
GNkGYw/4yAY5HoPidRbG6Ka9XKfwqxT9n/pp9gndg0ciESOV+1agRExeA7VJFprK
VHoFaQ13GqDMEFr/D+FRx/2e9VNiXZKELIc6qFpFC8Vr+mCtH2/Hqalfus7hpvO1
o7T3xXKvqDUEOkG0VjcKcbLejIbPqw6Hiuq6f/MHf8BNi6nXRa+6EJJr0knMAmpF
AzXMvFsVxnaYAqfT6puKrLvoYHArIQ6yguV+LDKpi2UstxjfKWmO84Io/drbedK1
ELzyssClUeiLLsqNwzMSeedHmizuiyiFZ5aKkqCgHkXei6VdSAy6u6XoOLc9CKeM
H/fpIksaMnJVFx+fcQR+kg2WoYVW/0p6I4wEGzPNiGw2vZ/IkspzYb4yhJVu+VSZ
rfoHgCpNklumVXVf5JvqAGPfgdTQQW4s3myWS/SxX1R2xd5ZA/3BcMktcNCQYAvZ
iTA8tCAqd73gSxv+DBvX6BlweiJKIY+j+TcZqietSMFMj+PVRZz4kVp3gAe3abrx
tRnvZchdjoCZv0Xap5J/qu+wbW/QOeDS/oy11jXSwlFEcau8ldfMUG899jx7k39w
EkTH6Jo35tyP7rF3vETtnIYen6wUpKEAySWPZ/AO/VAP2zu1/9jgTOY8AY+t1q/d
QZOR4C4GVlByFxtXJVgU1ZOPInaJhSIwB3/0gqPP9sd24T7Nng==
=Apap
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are not a lot of important fixes for the soc tree yet this time,
but it's time to upstream what I got so far:
- DT Fixes for Arm Juno and ST-Ericsson Ux500 to add missing critical
temperature points
- A number of fixes for the Arm SCMI firmware, addressing correctness
issues in the code, in particular error handling and resource
leaks.
- One error handling fix for the new i.MX93 power domain driver
- Several devicetree fixes for NXP i.MX6/8/9 and Layerscape chips,
fixing incorrect or missing DT properties for MDIO controller
nodes, CPLD, USB and regulators for various boards, as well as some
fixes for DT schema checks.
- MAINTAINERS file updates for HiSilicon LPC Bus and Broadcom git
URLs"
* tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
arm64: dts: juno: Add thermal critical trip points
firmware: arm_scmi: Fix deferred_tx_wq release on error paths
firmware: arm_scmi: Fix devres allocation device in virtio transport
firmware: arm_scmi: Make Rx chan_setup fail on memory errors
firmware: arm_scmi: Make tx_prepare time out eventually
firmware: arm_scmi: Suppress the driver's bind attributes
firmware: arm_scmi: Cleanup the core driver removal callback
MAINTAINERS: Update HiSilicon LPC BUS Driver maintainer
ARM: dts: ux500: Add trips to battery thermal zones
arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
arm64: dts: imx93: correct gpio-ranges
arm64: dts: imx93: correct s4mu interrupt names
dt-bindings: power: gpcv2: add power-domains property
arm64: dts: imx8: correct clock order
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
arm64: dts: imx8mn: Correct the usb power domain
...
The engine busyness stats has a worker function to do things like
64bit extend the 32bit hardware counters. The GuC's reset prepare
function flushes out this worker function to ensure no corruption
happens during the reset. Unforunately, the worker function has an
infinite wait for active resets to finish before doing its work. Thus
a deadlock would occur if the worker function had actually started
just as the reset starts.
The function being used to lock the reset-in-progress mutex is called
intel_gt_reset_trylock(). However, as noted it does not follow
standard 'trylock' conventions and exit if already locked. So rename
the current _trylock function to intel_gt_reset_lock_interruptible(),
which is the behaviour it actually provides. In addition, add a new
implementation of _trylock and call that from the busyness stats
worker instead.
v2: Rename existing trylock to interruptible rather than trying to
preserve the existing (confusing) naming scheme (review comments from
Tvrtko).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102192109.2492625-3-John.C.Harrison@Intel.com
If a context has already been registered prior to first submission
then context init code was not being called. The noticeable effect of
that was the scheduling priority was left at zero (meaning super high
priority) instead of being set to normal. This would occur with
kernel contexts at start of day as they are manually pinned up front
rather than on first submission. So add a call to initialise those
when they are pinned.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102192109.2492625-2-John.C.Harrison@Intel.com
These servers are all on the public versions of the roadmap. The model
numbers for Grand Ridge, Granite Rapids, and Sierra Forest were included
in the September 2022 edition of the Instruction Set Extensions document.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20221103203310.5058-1-tony.luck@intel.com
A set of test cases to verify enum fwd resolution logic:
- verify that enum fwd can be resolved as full enum64;
- verify that enum64 fwd can be resolved as full enum;
- verify that enum size is considered when enums are compared for
equivalence.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221101235413.1824260-2-eddyz87@gmail.com
Changes de-duplication logic for enums in the following way:
- update btf_hash_enum to ignore size and kind fields to get
ENUM and ENUM64 types in a same hash bucket;
- update btf_compat_enum to consider enum fwd to be compatible with
full enum64 (and vice versa);
This allows BTF de-duplication in the following case:
// CU #1
enum foo;
struct s {
enum foo *a;
} *x;
// CU #2
enum foo {
x = 0xfffffffff // big enough to force enum64
};
struct s {
enum foo *a;
} *y;
De-duplicated BTF prior to this commit:
[1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1
'x' val=68719476735ULL
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64
encoding=(none)
[3] STRUCT 's' size=8 vlen=1
'a' type_id=4 bits_offset=0
[4] PTR '(anon)' type_id=1
[5] PTR '(anon)' type_id=3
[6] STRUCT 's' size=8 vlen=1
'a' type_id=8 bits_offset=0
[7] ENUM 'foo' encoding=UNSIGNED size=4 vlen=0
[8] PTR '(anon)' type_id=7
[9] PTR '(anon)' type_id=6
De-duplicated BTF after this commit:
[1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1
'x' val=68719476735ULL
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64
encoding=(none)
[3] STRUCT 's' size=8 vlen=1
'a' type_id=4 bits_offset=0
[4] PTR '(anon)' type_id=1
[5] PTR '(anon)' type_id=3
Enum forward declarations in C do not provide information about
enumeration values range. Thus the `btf_type->size` field is
meaningless for forward enum declarations. In fact, GCC does not
encode size in DWARF for forward enum declarations
(but dwarves sets enumeration size to a default value of `sizeof(int) * 8`
when size is not specified see dwarf_loader.c:die__create_new_enumeration).
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221101235413.1824260-1-eddyz87@gmail.com
mmu notifier does not always hold mm->sem during call back. That causes
a race condition between kfd userprt buffer mapping and mmu notifier
which leds to gpu shadder or SDMA access userptr buffer before it has been
mapped to gpu VM. Always map userptr buffer to avoid that though it may make
some userprt buffers mapped two times.
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After moving all FPU code to the DML folder, we can enable DCN support
for the ARM64 platform. Remove the -mgeneral-regs-only CFLAG from the
code in the DML folder that needs to use hardware FPU, and add a control
mechanism for ARM Neon.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ao Zhong <hacc1225@gmail.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- clear kiq ring after suspend/resume under sriov to aviod kiq ring
test failure
- update irq after resume to fix kiq interrput loss
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
temporary workaround to skip ras error for gc_v11_0_3 until IFWI release later
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some GPUs with more CUs, the original sibling_map[32]
in struct crat_subtype_cache is not enough
to save the cache information when create the VCRAT table,
so skip filling the struct crat_subtype_cache info instead
fill struct kfd_cache_properties directly to fix this problem.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To allow invoking ip specific callbacks
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:3008:29: error: incompatible function pointer types initializing 'int (*)(void *, uint32_t, long *, uint32_t)' (aka 'int (*)(void *, unsigned int, long *, unsigned int)') with an expression of type 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, uint32_t)' (aka 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
.odn_edit_dpm_table = smu_od_edit_dpm_table,
^~~~~~~~~~~~~~~~~~~~~
1 error generated.
There are only two implementations of ->odn_edit_dpm_table() in 'struct
amd_pm_funcs': smu_od_edit_dpm_table() and pp_odn_edit_dpm_table(). One
has a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND' and the
other uses 'u32'. Ultimately, smu_od_edit_dpm_table() calls
->od_edit_dpm_table() from 'struct pptable_funcs' and
pp_odn_edit_dpm_table() calls ->odn_edit_dpm_table() from 'struct
pp_hwmgr_func', which both have a second parameter type of 'enum
PP_OD_DPM_TABLE_COMMAND'.
Update the type parameter in both the prototype in 'struct amd_pm_funcs'
and pp_odn_edit_dpm_table() to 'enum PP_OD_DPM_TABLE_COMMAND', which
cleans up the warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c:412:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
.trans_msg = xgpu_ai_mailbox_trans_msg,
^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c:435:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
.trans_msg = xgpu_nv_mailbox_trans_msg,
^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
The type of the second parameter in the prototype should be 'enum
idh_request' instead of 'u32'. Update it to clear up the warnings.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and
refactor the rest of the code accordingly.
Important to mention is that doing a build before/after this patch
results in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/238
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and
refactor the rest of the code accordingly.
It's worth mentioning that doing a build before/after this patch results
in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/239
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So the callbacks are set early in case we need them.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So the callbacks are set early in case we need them.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So the callbacks are set before we use them.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unnecessary register program in SRIOV
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Start from soc21, CP does not support MCBP, so disable it.
[how]
Used amgpu_mcbp flag alone instead of checking if is in SRIOV to
enable/disable MCBP.
Only set flag to enable on asic_type prior to soc21 in SRIOV.
Signed-off-by: Yiqing Yao <yiqing.yao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
