When the input parameter idx meets the expected case option in
hinic_dbg_get_func_table(), read_data is not released. Fix it.
Fixes: 5215e16244 ("hinic: add support to query function table")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The value of lli_credit_cnt is incorrectly assigned, fix it.
Fixes: a0337c0dee ("hinic: add support to set and get irq coalesce")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Benjamin Poirier says:
====================
selftests: net: Fix problems in some drivers/net tests
Fix two problems mostly introduced in commit bbb774d921 ("net: Add tests
for bonding and team address list management").
====================
Link: https://lore.kernel.org/r/20221019091042.783786-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lag_lib.sh creates the interfaces dummy1 and dummy2 whereas
dev_addr_lists.sh:destroy() deletes the interfaces dummy0 and dummy1. Fix
the mismatch in names.
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When exporting and running a subset of selftests via kselftest, files from
parts of the source tree which were not exported are not available. A few
tests are trying to source such files. Address the problem by using
symlinks.
The problem can be reproduced by running:
make -C tools/testing/selftests gen_tar TARGETS="drivers/net/bonding"
[... extract archive ...]
./run_kselftest.sh
or:
make kselftest KBUILD_OUTPUT=/tmp/kselftests TARGETS="drivers/net/bonding"
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management")
Fixes: eccd0a80dc ("selftests: net: dsa: add a stress test for unlocked FDB operations")
Link: https://lore.kernel.org/netdev/40f04ded-0c86-8669-24b1-9a313ca21076@redhat.com/
Reported-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the rx drop is calculated as the sum of multiple HW drop
counters. The issue is that not all the HW drop counters were added for
the rx drop counter. So if for example you have a police that drops
frames, they were not see in the rx drop counter.
Fix this by updating how the rx drop counter is calculated. It is
required to add also RX_RED_PRIO_* HW counters.
Fixes: 12c2d0a5b8 ("net: lan966x: add ethtool configuration and statistics")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20221019083056.2744282-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If phy_device_register() fails, phy_device_free() need be called to
put refcount, so memory of phy device and device name can be freed
in callback function.
If get_phy_device() fails, mdiobus_unregister() need be called,
or it will cause warning in mdiobus_free() and kobject is leaked.
Fixes: 533dd11a12 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221019064104.3228892-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot found a crash in tipc_topsrv_accept:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
Workqueue: tipc_rcv tipc_topsrv_accept
RIP: 0010:kernel_accept+0x22d/0x350 net/socket.c:3487
Call Trace:
<TASK>
tipc_topsrv_accept+0x197/0x280 net/tipc/topsrv.c:460
process_one_work+0x991/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
It was caused by srv->listener that might be set to null by
tipc_topsrv_stop() in net .exit whereas it's still used in
tipc_topsrv_accept() worker.
srv->listener is protected by srv->idr_lock in tipc_topsrv_stop(), so add
a check for srv->listener under srv->idr_lock in tipc_topsrv_accept() to
avoid the null-ptr-deref. To ensure the lsock is not released during the
tipc_topsrv_accept(), move sock_release() after tipc_topsrv_work_stop()
where it's waiting until the tipc_topsrv_accept worker to be done.
Note that sk_callback_lock is used to protect sk->sk_user_data instead of
srv->listener, and it should check srv in tipc_topsrv_listener_data_ready()
instead. This also ensures that no more tipc_topsrv_accept worker will be
started after tipc_conn_close() is called in tipc_topsrv_stop() where it
sets sk->sk_user_data to null.
Fixes: 0ef897be12 ("tipc: separate topology server listener socket from subcsriber sockets")
Reported-by: syzbot+c5ce866a8d30f4be0651@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/4eee264380c409c61c6451af1059b7fb271a7e7b.1666120790.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A misplaced closing parenthesis caused the groupid/instanceid values to
be considered part of the ternary operator's condition instead of being
OR'd into the resulting value.
Fixes: f32898c94a ("drm/i915/xelpg: Add multicast steering")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019222437.3035182-1-matthew.d.roper@intel.com
After commit afef88e655 ("selftests/bpf: Store BPF object files with
.bpf.o extension"), we should use *.bpf.o instead of *.o.
In addition, use the BPF_FILE variable to save the BPF object file name,
which can be better identified and modified.
Fixes: afef88e655 ("selftests/bpf: Store BPF object files with .bpf.o extension")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/1666235134-562-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The patchable_function_entry(5) might output 5 single nop
instructions (depends on toolchain), which will clash with
bpf_arch_text_poke check for 5 bytes nop instruction.
Adding early init call for dispatcher that checks and change
the patchable entry into expected 5 nop instruction if needed.
There's no need to take text_mutex, because we are using it
in early init call which is called at pre-smp time.
Fixes: ceea991a01 ("bpf: Move bpf_dispatcher function out of ftrace locations")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221018075934.574415-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a more complete introduction, with links to man pages.
Move toctree of map types above usage notes.
Format usage notes to improve readability.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20221012152715.25073-1-donald.hunter@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
core:
- fix connector DDC pointer
- fix buffer overflow in format_helper_test
amdgpu:
- Mode2 reset fixes for Sienna Cichlid
- Revert broken fan speed sensor fix
- SMU 13.x fixes
- GC 11.x fixes
- RAS fixes
- SR-IOV fixes
- Fix BO move breakage on SI
- Misc compiler fixes
- Fix gfx9 APU regression caused by PCI AER fix
vc4:
- HDMI fixes
panfrost:
- compiler fixes
-----BEGIN PGP SIGNATURE-----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=cF5c
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-10-21' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Usual fixes for the week.
The amdgpu contains fixes for two regressions, one reported in
response to rc1 which broke on SI GPUs, and one gfx9 APU regression.
Otherwise it's mostly fixes for new IP, and some GPU reset fixes. vc4
is just HDMI fixes, and panfrost has some mnor types fixes.
Core:
- fix connector DDC pointer
- fix buffer overflow in format_helper_test
amdgpu:
- Mode2 reset fixes for Sienna Cichlid
- Revert broken fan speed sensor fix
- SMU 13.x fixes
- GC 11.x fixes
- RAS fixes
- SR-IOV fixes
- Fix BO move breakage on SI
- Misc compiler fixes
- Fix gfx9 APU regression caused by PCI AER fix
vc4:
- HDMI fixes
panfrost:
- compiler fixes"
* tag 'drm-fixes-2022-10-21' of git://anongit.freedesktop.org/drm/drm: (35 commits)
drm/amdgpu: fix sdma doorbell init ordering on APUs
drm/panfrost: replace endian-specific types with native ones
drm/panfrost: Remove type name from internal structs
drm/connector: Set DDC pointer in drmm_connector_init
drm: tests: Fix a buffer overflow in format_helper_test
drm/amdgpu: use DRM_SCHED_FENCE_DONT_PIPELINE for VM updates
drm/sched: add DRM_SCHED_FENCE_DONT_PIPELINE flag
drm/amdgpu: Fix for BO move issue
drm/amdgpu: dequeue mes scheduler during fini
drm/amd/pm: enable thermal alert on smu_v13_0_10
drm/amdgpu: Program GC registers through RLCG interface in gfx_v11/gmc_v11
drm/amdkfd: Fix type of reset_type parameter in hqd_destroy() callback
drm/amd/display: Increase frame size limit for display_mode_vba_util_32.o
drm/amd/pm: add SMU IP v13.0.4 IF version define to V7
drm/amd/pm: update SMU IP v13.0.4 driver interface version
drm/amd/pm: Init pm_attr_list when dpm is disabled
drm/amd/pm: disable cstate feature for gpu reset scenario
drm/amd/pm: fulfill SMU13.0.7 cstate control interface
drm/amd/pm: fulfill SMU13.0.0 cstate control interface
drm/amdgpu: Add sriov vf ras support in amdgpu_ras_asic_supported
...
Several minor fixes for rc2:
* Fix the module alias for the ahci_imx driver to get autoloading to
work (from Alexander).
* Fix a potential array-index-out-of-bounds problem with the enclosure
managment support in the ahci driver (from Kai-Heng).
* Several patches to fix compilation warnings thrown by clang in the
ahci_st, sata_rcar, ahci_brcm, ahci_xgene, ahci_imx and ahci_qoriq
drivers (from me).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCY1HZ7wAKCRDdoc3SxdoY
dqs9AP4lTc4nUh/cf6EOsPFDBsT4WmAkHy4XFzEF7VQsGmfPAwEAtOFFNfR3//Ku
EeskPDGwy3E7F/s/pI92J01l/z4fSwg=
=qKSO
-----END PGP SIGNATURE-----
Merge tag 'ata-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
"Several minor fixes:
- Fix the module alias for the ahci_imx driver to get autoloading to
work (Alexander)
- Fix a potential array-index-out-of-bounds problem with the
enclosure managment support in the ahci driver (Kai-Heng)
- Several patches to fix compilation warnings thrown by clang in the
ahci_st, sata_rcar, ahci_brcm, ahci_xgene, ahci_imx and ahci_qoriq
drivers (me)"
* tag 'ata-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci_qoriq: Fix compilation warning
ata: ahci_imx: Fix compilation warning
ata: ahci_xgene: Fix compilation warning
ata: ahci_brcm: Fix compilation warning
ata: sata_rcar: Fix compilation warning
ata: ahci_st: Fix compilation warning
ata: ahci: Match EM_MAX_SLOTS with SATA_PMP_MAX_PORTS
ata: ahci-imx: Fix MODULE_ALIAS
with weaker memory ordering.
- DM core replace DMWARN with DMERR or DMCRIT for fatal errors.
- Enable WQ_HIGHPRI on DM verity target's verify_wq.
- Add documentation for DM verity's try_verify_in_tasklet option.
- Various typo and redundant word fixes in code and/or comments.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmNPGkIACgkQxSPxCi2d
A1oRywf/Si+OVFkBfLo43xxz9lHjJ8cbZktwo79X4J8WUAJsXbhACaMhPGi7kADS
AmmVvuEAHzghRWzQewUoqNxdmXVyP9KYnpAqlAncxHTfVqdQGeg8FEv+ssoHkJgL
UGBy6eIZLEJiIBkEnjgzLRsy/XEtNsV2TDcu09CdjFc1tFwJng9aUbkRAXuFwoWh
x7z7qr8R7GogpoLw2sN7MmKM+l7svxsxZ+Dbt6l6/TWbjCwmKo/+kf/COhS7B+Bt
Dpi0HxzFhBEuWod4qVZwLSggSKdAAfBG4Tcn2iRiJhJN5VPdyqo5SyH1ni4cie4q
pvFX5KlkdkiYiMIBuxZMQq9mNT4moA==
=dumQ
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix dm-bufio to use test_bit_acquire to properly test_bit on arches
with weaker memory ordering.
- DM core replace DMWARN with DMERR or DMCRIT for fatal errors.
- Enable WQ_HIGHPRI on DM verity target's verify_wq.
- Add documentation for DM verity's try_verify_in_tasklet option.
- Various typo and redundant word fixes in code and/or comments.
* tag 'for-6.1/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm clone: Fix typo in block_device format specifier
dm: remove unnecessary assignment statement in alloc_dev()
dm verity: Add documentation for try_verify_in_tasklet option
dm cache: delete the redundant word 'each' in comment
dm raid: fix typo in analyse_superblocks code comment
dm verity: enable WQ_HIGHPRI on verify_wq
dm raid: delete the redundant word 'that' in comment
dm: change from DMWARN to DMERR or DMCRIT for fatal errors
dm bufio: use the acquire memory barrier when testing for B_READING
- Fix a buffer overflow in format_helper_test.
- Set DDC pointer in drmm_connector_init.
- Compiler fixes for panfrost.
-----BEGIN PGP SIGNATURE-----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=rzib
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2022-10-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.1-rc2:
- Fix a buffer overflow in format_helper_test.
- Set DDC pointer in drmm_connector_init.
- Compiler fixes for panfrost.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c4d05683-8ebe-93b8-d24c-d1d2c68f12c4@linux.intel.com
Writes to the device must include an offset and size as defined in
CXL 2.0 8.2.9.5.2.4 Set LSA (Opcode 4103h)
Fixes tag is non obvious as this code has been through several
reworks and variable names + wasn't in use until the addition
of the region code.
Due to a bug in QEMU CXL emulation this overrun resulted in QEMU
crashing.
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 60b8f17215 ("cxl/pmem: Translate NVDIMM label commands to CXL label commands")
Link: https://lore.kernel.org/r/20220815154044.24733-3-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Not all decoders have a commit callback.
The CXL specification allows a host bridge with a single root port to
have no explicit HDM decoders. Currently the region driver assumes there
are none. As such the CXL core creates a special pass through decoder
instance without a commit callback.
Prior to this patch, the ->commit() callback was called unconditionally.
Thus a configuration with 1 Host Bridge, 1 Root Port, 1 switch with
multiple downstream ports below which there are multiple CXL type 3
devices results in a situation where committing the region causes a null
pointer dereference.
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Fixes: 176baefb2e ("cxl/hdm: Commit decoder state to hardware")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20220818164210.2084-1-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A bug in the LSA code resulted in transfers slightly larger
than the mailbox size. Let us make it easier to catch similar
issues in future by adding a low level check.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220815154044.24733-2-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This device was used only on the davinci dm644x platform that
is now gone, and no references to the device remain in the
kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Add a device tree node to describe the DisplayPort connector, and
connect it to the DPSUB output.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michal Simek <michal.simek@amd.com>
The DPSUB DT bindings now specify ports to model the connections with
the programmable logic and the DisplayPort output. Add them to the
device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Not only is this function unused, but even worse, the bit it is checking
is actually used for signaling if the feature is supported, not enabled.
Therefore, remove the unused helper function ata_id_flush_ext_enabled().
ata_id_has_flush_ext() is left unmodified, since this extra supported bit
(Bit 13 of word 86) is simply a copy of the bit that ata_id_has_flush_ext()
already checks (Bit 13 of word 83), see ACS-5 r10:
7.13.6.41 Words 85..87, 120: Commands and feature sets supported or enabled
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Not only is this function unused, but even worse, the bit it is checking
is actually used for signaling if the feature is supported, not enabled.
Therefore, remove the unused helper function ata_id_flush_enabled().
ata_id_has_flush() is left unmodified, since this extra supported bit
(Bit 12 of word 86) is simply a copy of the bit that ata_id_has_flush()
already checks (Bit 12 of word 83), see ACS-5 r10:
7.13.6.41 Words 85..87, 120: Commands and feature sets supported or enabled
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Not only is this function unused, but even worse, the bit it is checking
is actually used for signaling if the feature is supported, not enabled.
Therefore, remove the unused helper function ata_id_lba48_enabled().
ata_id_has_lba48() is left unmodified, since this extra supported bit
(Bit 10 of word 86) is simply a copy of the bit that ata_id_has_lba48()
already checks (Bit 10 of word 83), see ACS-5 r10:
7.13.6.41 Words 85..87, 120: Commands and feature sets supported or enabled
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Making polled RCU grace periods account for expedited grace periods
required acquiring the leaf rcu_node structure's lock during early boot,
but after rcu_init() was called. This lock is irq-disabled, but the
code incorrectly assumes that irqs are always disabled when invoking
synchronize_rcu(). The exception is early boot before the scheduler has
started, which means that upon return from synchronize_rcu(), irqs will
be incorrectly enabled.
This commit fixes this bug by using irqsave/irqrestore locking primitives.
Fixes: bf95b2bc3e ("rcu: Switch polled grace-period APIs to ->gp_seq_polled")
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, if the torture.sh allmodconfig step fails, this is counted as
an error (as it should be), but there is also an extraneous complaint
about a missing log file. This commit therefore adds that log file,
which is hoped to reduce confused reactions to the error report.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, torture.sh will compress the vmlinux files for KASAN and
KCSAN runs. But it will compress all of the files, including those
copied verbatim by the kvm-again.sh script. Compression takes around ten
minutes, so this is not a good thing. This commit therefore compresses
only one of a given set of identical vmlinux files, and then hard-links
it to the directories produced by kvm-again.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The arm64 architecture uses either an LL/SC loop (old systems) or an LSE
stadd instruction (new systems) to implement this_cpu_add(), both of which
are NMI safe. This means that the old and more-efficient srcu_read_lock()
may be used in NMI context, without the need for srcu_read_lock_nmisafe().
Therefore, add the new Kconfig option ARCH_HAS_NMI_SAFE_THIS_CPU_OPS to
arch/arm64/Kconfig, which will cause NEED_SRCU_NMI_SAFE to be deselected,
thus preserving the current srcu_read_lock() behavior.
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: <linux-arm-kernel@lists.infradead.org>
The x86 architecture uses an add-to-memory instruction to implement
this_cpu_add(), which is NMI safe. This means that the old and
more-efficient srcu_read_lock() may be used in NMI context, without
the need for srcu_read_lock_nmisafe(). Therefore, add the new Kconfig
option ARCH_HAS_NMI_SAFE_THIS_CPU_OPS to arch/x86/Kconfig, which will
cause NEED_SRCU_NMI_SAFE to be deselected, thus preserving the current
srcu_read_lock() behavior.
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: <x86@kernel.org>
This commit adds runtime checks to verify that a given srcu_struct uses
consistent NMI-safe (or not) read-side primitives globally, but based
on the per-CPU data. These global checks are made by the grace-period
code that must scan the srcu_data structures anyway, and are done only
in kernels built with CONFIG_PROVE_RCU=y.
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
This commit adds runtime checks to verify that a given srcu_struct uses
consistent NMI-safe (or not) read-side primitives on a per-CPU basis.
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
On strict load-store architectures, the use of this_cpu_inc() by
srcu_read_lock() and srcu_read_unlock() is not NMI-safe in TREE SRCU.
To see this suppose that an NMI arrives in the middle of srcu_read_lock(),
just after it has read ->srcu_lock_count, but before it has written
the incremented value back to memory. If that NMI handler also does
srcu_read_lock() and srcu_read_lock() on that same srcu_struct structure,
then upon return from that NMI handler, the interrupted srcu_read_lock()
will overwrite the NMI handler's update to ->srcu_lock_count, but
leave unchanged the NMI handler's update by srcu_read_unlock() to
->srcu_unlock_count.
This can result in a too-short SRCU grace period, which can in turn
result in arbitrary memory corruption.
If the NMI handler instead interrupts the srcu_read_unlock(), this
can result in eternal SRCU grace periods, which is not much better.
This commit therefore creates a pair of new srcu_read_lock_nmisafe()
and srcu_read_unlock_nmisafe() functions, which allow SRCU readers in
both NMI handlers and in process and IRQ context. It is bad practice
to mix the existing and the new _nmisafe() primitives on the same
srcu_struct structure. Use one set or the other, not both.
Just to underline that "bad practice" point, using srcu_read_lock() at
process level and srcu_read_lock_nmisafe() in your NMI handler will not,
repeat NOT, work. If you do not immediately understand why this is the
case, please review the earlier paragraphs in this commit log.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Apply feedback from Randy Dunlap. ]
[ paulmck: Apply feedback from John Ogness. ]
[ paulmck: Apply feedback from Frederic Weisbecker. ]
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
cti_enable_hw() and cti_disable_hw() are called from an atomic context
so shouldn't use runtime PM because it can result in a sleep when
communicating with firmware.
Since commit 3c66563378 ("Revert "firmware: arm_scmi: Add clock
management to the SCMI power domain""), this causes a hang on Juno when
running the Perf Coresight tests or running this command:
perf record -e cs_etm//u -- ls
This was also missed until the revert commit because pm_runtime_put()
was called with the wrong device until commit 692c9a499b ("coresight:
cti: Correct the parameter for pm_runtime_put")
With lock and scheduler debugging enabled the following is output:
coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022
Call trace:
dump_backtrace+0x134/0x140
show_stack+0x20/0x58
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
__might_resched+0x180/0x228
__might_sleep+0x50/0x88
__pm_runtime_resume+0xac/0xb0
cti_enable+0x44/0x120
coresight_control_assoc_ectdev+0xc0/0x150
coresight_enable_path+0xb4/0x288
etm_event_start+0x138/0x170
etm_event_add+0x48/0x70
event_sched_in.isra.122+0xb4/0x280
merge_sched_in+0x1fc/0x3d0
visit_groups_merge.constprop.137+0x16c/0x4b0
ctx_sched_in+0x114/0x1f0
perf_event_sched_in+0x60/0x90
ctx_resched+0x68/0xb0
perf_event_exec+0x138/0x508
begin_new_exec+0x52c/0xd40
load_elf_binary+0x6b8/0x17d0
bprm_execve+0x360/0x7f8
do_execveat_common.isra.47+0x218/0x238
__arm64_sys_execve+0x48/0x60
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.4+0xfc/0x120
do_el0_svc+0x34/0xc0
el0_svc+0x40/0x98
el0t_64_sync_handler+0x98/0xc0
el0t_64_sync+0x170/0x174
Fix the issue by removing the runtime PM calls completely. They are not
needed here because it must have already been done when building the
path for a trace.
Fixes: 835d722ba1 ("coresight: cti: Initial CoreSight CTI Driver")
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Reported-by: Cristian Marussi <Cristian.Marussi@arm.com>
Suggested-by: Suzuki Poulose <Suzuki.Poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221005131452.1506328-1-james.clark@arm.com
With lockdeps enabled, we get the following warning:
======================================================
WARNING: possible circular locking dependency detected
------------------------------------------------------
kworker/u12:1/53 is trying to acquire lock:
ffff80000adce220 (coresight_mutex){+.+.}-{4:4}, at: coresight_set_assoc_ectdev_mutex+0x3c/0x5c
but task is already holding lock:
ffff80000add1f60 (ect_mutex){+.+.}-{4:4}, at: cti_probe+0x318/0x394
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (ect_mutex){+.+.}-{4:4}:
__mutex_lock_common+0xd8/0xe60
mutex_lock_nested+0x44/0x50
cti_add_assoc_to_csdev+0x4c/0x184
coresight_register+0x2f0/0x314
tmc_probe+0x33c/0x414
-> #0 (coresight_mutex){+.+.}-{4:4}:
__lock_acquire+0x1a20/0x32d0
lock_acquire+0x160/0x308
__mutex_lock_common+0xd8/0xe60
mutex_lock_nested+0x44/0x50
coresight_set_assoc_ectdev_mutex+0x3c/0x5c
cti_update_conn_xrefs+0x6c/0xf8
cti_probe+0x33c/0x394
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(ect_mutex);
lock(coresight_mutex);
lock(ect_mutex);
lock(coresight_mutex);
*** DEADLOCK ***
4 locks held by kworker/u12:1/53:
#0: ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1fc/0x63c
#1: (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x228/0x63c
#2: (&dev->mutex){....}-{4:4}, at: __device_attach+0x48/0x1a8
#3: (ect_mutex){+.+.}-{4:4}, at: cti_probe+0x318/0x394
To fix the same, call cti_add_assoc_to_csdev without the holding
coresight_mutex and confine the locking while setting the associated
ect / cti device using coresight_set_assoc_ectdev_mutex().
Fixes: 177af8285b ("coresight: cti: Enable CTI associated with devices")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220721130329.3787211-1-sudeep.holla@arm.com
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for sis630
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Since a7c01fa93a ("signal: break out of wait loops on kthread_stop()")
kthread_stop() started asserting a pending signal which wreaks havoc with
a few of our selftests. Mainly because they are not fully expecting to
handle signals, but also cutting the intended test runtimes short due
signal_pending() now returning true (via __igt_timeout), which therefore
breaks both the patterns of:
kthread_run()
..sleep for igt_timeout_ms to allow test to exercise stuff..
kthread_stop()
And check for errors recorded in the thread.
And also:
Main thread | Test thread
---------------+------------------------------
kthread_run() |
kthread_stop() | do stuff until __igt_timeout
| -- exits early due signal --
Where this kthread_stop() was assume would have a "join" semantics, which
it would have had if not the new signal assertion issue.
To recap, threads are now likely to catch a previously impossible
ERESTARTSYS or EINTR, marking the test as failed, or have a pointlessly
short run time.
To work around this start using kthread_work(er) API which provides
an explicit way of waiting for threads to exit. And for cases where
parent controls the test duration we add explicit signaling which threads
will now use instead of relying on kthread_should_stop().
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221020130841.3845791-1-tvrtko.ursulin@linux.intel.com
This commit updates listRCU.txt to reflect RCU additions and changes
over the past few years.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
We use all kinds of weird names for our base address registers.
Take the names from the spec and stick to them to avoid confusing
everyone.
The only exceptions are IOBAR and LMEMBAR since naming them
IOBAR_BAR and LMEMBAR_BAR looks too funny, and yet I think
that adding the _BAR to GTTMMADR & co. (which don't have one
in the spec name) does make it more clear what they are.
And IOBAR vs. GTTMMADR_BAR also looks a bit too inconsistent
for my taste.
v2: Fix gvt build
v3: Add GEN2_IO_BAR for completeness
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221005195646.17201-1-ville.syrjala@linux.intel.com
Acked-by: Matthew Auld <matthew.auld@intel.com>
kmemleak reported a sequence of memory leaks, and one of them indicated we
failed to free a pointer:
comm "mount", pid 19610, jiffies 4297086464 (age 60.635s)
hex dump (first 8 bytes):
73 64 61 00 81 88 ff ff sda.....
backtrace:
[<00000000d77f3e04>] kstrdup_const+0x46/0x70
[<00000000e51fa804>] kobject_set_name_vargs+0x2f/0xb0
[<00000000247cd595>] kobject_init_and_add+0xb0/0x120
[<00000000f9139aaf>] xfs_mountfs+0x367/0xfc0
[<00000000250d3caf>] xfs_fs_fill_super+0xa16/0xdc0
[<000000008d873d38>] get_tree_bdev+0x256/0x390
[<000000004881f3fa>] vfs_get_tree+0x41/0xf0
[<000000008291ab52>] path_mount+0x9b3/0xdd0
[<0000000022ba8f2d>] __x64_sys_mount+0x190/0x1d0
As mentioned in kobject_init_and_add() comment, if this function
returns an error, kobject_put() must be called to properly clean up
the memory associated with the object. Apparently, xfs_sysfs_init()
does not follow such a requirement. When kobject_init_and_add()
returns an error, the space of kobj->kobject.name alloced by
kstrdup_const() is unfree, which will cause the above stack.
Fix it by adding kobject_put() when kobject_init_and_add returns an
error.
Fixes: a31b1d3d89 ("xfs: add xfs_mount sysfs kobject")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
