The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
So far posix acls were passed as a void blob to the security and
integrity modules. Some of them like evm then proceed to interpret the
void pointer and convert it into the kernel internal struct posix acl
representation to perform their integrity checking magic. This is
obviously pretty problematic as that requires knowledge that only the
vfs is guaranteed to have and has lead to various bugs. Add a proper
security hook for setting posix acls and pass down the posix acls in
their appropriate vfs format instead of hacking it through a void
pointer stored in the uapi format.
I spent considerate time in the security module infrastructure and
audited all codepaths. SELinux has no restrictions based on the posix
acl values passed through it. The capability hook doesn't need to be
called either because it only has restrictions on security.* xattrs. So
these are all fairly simply hooks for SELinux.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
So far posix acls were passed as a void blob to the security and
integrity modules. Some of them like evm then proceed to interpret the
void pointer and convert it into the kernel internal struct posix acl
representation to perform their integrity checking magic. This is
obviously pretty problematic as that requires knowledge that only the
vfs is guaranteed to have and has lead to various bugs. Add a proper
security hook for setting posix acls and pass down the posix acls in
their appropriate vfs format instead of hacking it through a void
pointer stored in the uapi format.
In the next patches we implement the hooks for the few security modules
that do actually have restrictions on posix acls.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
In order to build a type safe posix api around get and set acl we need
all filesystem to implement get and set acl.
So far 9p implemented a ->get_inode_acl() operation that didn't require
access to the dentry in order to allow (limited) permission checking via
posix acls in the vfs. Now that we have get and set acl inode operations
that take a dentry argument we can give 9p get and set acl inode
operations.
This is mostly a light refactoring of the codepaths currently used in 9p
posix acl xattr handler. After we have fully implemented the posix acl
api and switched the vfs over to it, the 9p specific posix acl xattr
handler and associated code will be removed.
Note, until the vfs has been switched to the new posix acl api this
patch is a non-functional change.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
In order to build a type safe posix api around get and set acl we need
all filesystem to implement get and set acl.
So far 9p implemented a ->get_inode_acl() operation that didn't require
access to the dentry in order to allow (limited) permission checking via
posix acls in the vfs. Now that we have get and set acl inode operations
that take a dentry argument we can give 9p get and set acl inode
operations.
This is mostly a refactoring of the codepaths currently used in 9p posix
acl xattr handler. After we have fully implemented the posix acl api and
switched the vfs over to it, the 9p specific posix acl xattr handler and
associated code will be removed.
Note, until the vfs has been switched to the new posix acl api this
patch is a non-functional change.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
In order to build a type safe posix api around get and set acl we need
all filesystem to implement get and set acl.
So far cifs wasn't able to implement get and set acl inode operations
because it needs access to the dentry. Now that we extended the set acl
inode operation to take a dentry argument and added a new get acl inode
operation that takes a dentry argument we can let cifs implement get and
set acl inode operations.
This is mostly a copy and paste of the codepaths currently used in cifs'
posix acl xattr handler. After we have fully implemented the posix acl
api and switched the vfs over to it, the cifs specific posix acl xattr
handler and associated code will be removed and the code duplication
will go away.
Note, until the vfs has been switched to the new posix acl api this
patch is a non-functional change.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
In order to build a type safe posix api around get and set acl we need
all filesystem to implement get and set acl.
So far cifs wasn't able to implement get and set acl inode operations
because it needs access to the dentry. Now that we extended the set acl
inode operation to take a dentry argument and added a new get acl inode
operation that takes a dentry argument we can let cifs implement get and
set acl inode operations.
This is mostly a copy and paste of the codepaths currently used in cifs'
posix acl xattr handler. After we have fully implemented the posix acl
api and switched the vfs over to it, the cifs specific posix acl xattr
handler and associated code will be removed and the code duplication
will go away.
Note, until the vfs has been switched to the new posix acl api this
patch is a non-functional change.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
Since some filesystem rely on the dentry being available to them when
setting posix acls (e.g., 9p and cifs) they cannot rely on the old get
acl inode operation to retrieve posix acl and need to implement their
own custom handlers because of that.
In a previous patch we renamed the old get acl inode operation to
->get_inode_acl(). We decided to rename it and implement a new one since
->get_inode_acl() is called generic_permission() and inode_permission()
both of which can be called during an filesystem's ->permission()
handler. So simply passing a dentry argument to ->get_acl() would have
amounted to also having to pass a dentry argument to ->permission(). We
avoided that change.
This adds a new ->get_acl() inode operations which takes a dentry
argument which filesystems such as 9p, cifs, and overlayfs can implement
to get posix acls.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
The current inode operation for getting posix acls takes an inode
argument but various filesystems (e.g., 9p, cifs, overlayfs) need access
to the dentry. In contrast to the ->set_acl() inode operation we cannot
simply extend ->get_acl() to take a dentry argument. The ->get_acl()
inode operation is called from:
acl_permission_check()
-> check_acl()
-> get_acl()
which is part of generic_permission() which in turn is part of
inode_permission(). Both generic_permission() and inode_permission() are
called in the ->permission() handler of various filesystems (e.g.,
overlayfs). So simply passing a dentry argument to ->get_acl() would
amount to also having to pass a dentry argument to ->permission(). We
should avoid this unnecessary change.
So instead of extending the existing inode operation rename it from
->get_acl() to ->get_inode_acl() and add a ->get_acl() method later that
passes a dentry argument and which filesystems that need access to the
dentry can implement instead of ->get_inode_acl(). Filesystems like cifs
which allow setting and getting posix acls but not using them for
permission checking during lookup can simply not implement
->get_inode_acl().
This is intended to be a non-functional change.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Suggested-by/Inspired-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The xrgb2101010 format conversion test (unlike for other formats) does
an endianness conversion on the results. However, it always converts
TEST_BUF_SIZE 32-bit integers, which results in reading from (and
writing to) more memory than in present in the result buffer. Instead,
use the buffer size, divided by sizeof(u32).
The issue could be reproduced with KASAN:
./tools/testing/kunit/kunit.py run --kunitconfig drivers/gpu/drm/tests \
--kconfig_add CONFIG_KASAN=y --kconfig_add CONFIG_KASAN_VMALLOC=y \
--kconfig_add CONFIG_KASAN_KUNIT_TEST=y \
drm_format_helper_test.*xrgb2101010
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: 4531143196 ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_xrgb2101010()")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019073239.3779180-1-davidgow@google.com
The function xilinxfb_release() returns zero unconditionally. Make it
return void. There is no semantic change, the only effect is that it
becomes obvious that the driver's .remove() callback always returns zero.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Commit d7e7b9af10 ("fscrypt: stop using keyrings subsystem for
fscrypt_master_key") moved the keyring destruction from __put_super() to
generic_shutdown_super() so that the filesystem's block device(s) are
still available. Unfortunately, this causes a memory leak in the case
where a mount is attempted with the test_dummy_encryption mount option,
but the mount fails after the option has already been processed.
To fix this, attempt the keyring destruction in both places.
Reported-by: syzbot+104c2a89561289cec13e@syzkaller.appspotmail.com
Fixes: d7e7b9af10 ("fscrypt: stop using keyrings subsystem for fscrypt_master_key")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20221011213838.209879-1-ebiggers@kernel.org
If the cable is disconnected the PHY seems to toggle between MDI and
MDI-X modes. With the MDI crossover status interrupt active this causes
roughly 10 interrupts per second.
As the crossover status isn't checked by the driver, the interrupt can
be disabled to reduce the interrupt load.
Fixes: 87461f7a58 ("net: phy: DP83822 initial driver submission")
Signed-off-by: Felix Riemann <felix.riemann@sma.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221018104755.30025-1-svc.sw.rte.linux@sma.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fb_base in struct drm_mode_config has been unused for a long time.
Some drivers set it and some don't leading to a very confusing state
where the variable can't be relied upon, because there's no indication
as to which driver sets it and which doesn't.
The only usage of fb_base is internal to two drivers so instead of trying
to force it into all the drivers to get it into a coherent state
completely remove it.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimemrmann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019024401.394617-1-zack@kde.org
Eliminate the following coccicheck warning:
./drivers/block/ublk_drv.c:127:16-19: WARNING use flexible-array member instead
Signed-off-by: Yushan Zhou <katrinzhou@tencent.com>
Link: https://lore.kernel.org/r/20221018100132.355393-1-zys.zljxml@gmail.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The documented yaml compat string for the apq8016 is
"qcom,apq8016-lpass-cpu" not "qcom,lpass-cpu-apq8016". Looking at the other
lpass compat strings the general form is "qcom,socnum-lpass-cpu".
We need to fix both the driver and dts to match.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220628120435.3044939-3-bryan.odonoghue@linaro.org
Inject fault while probing module, if device_register() fails,
but the refcount of kobject is not decreased to 0, the name
allocated in dev_set_name() is leaked. Fix this by calling
put_device(), so that name can be freed in callback function
kobject_cleanup().
unreferenced object 0xffff88810152ad20 (size 8):
comm "modprobe", pid 252, jiffies 4294849206 (age 22.713s)
hex dump (first 8 bytes):
68 77 73 69 6d 30 00 ff hwsim0..
backtrace:
[<000000009c3504ed>] __kmalloc_node_track_caller+0x44/0x1b0
[<00000000c0228a5e>] kvasprintf+0xb5/0x140
[<00000000cff8c21f>] kvasprintf_const+0x55/0x180
[<0000000055a1e073>] kobject_set_name_vargs+0x56/0x150
[<000000000a80b139>] dev_set_name+0xab/0xe0
Fixes: f36a111a74 ("wwan_hwsim: WWAN device simulator")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20221018131607.1901641-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Filters on different vports are qualified by different implicit MACs and/or
VLANs, so shouldn't be considered equal even if their other match fields
are identical.
Fixes: 7c460d9be6 ("sfc: Extend and abstract efx_filter_spec to cover Huntington/EF10")
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20221018092841.32206-1-pieter.jansen-van-vuuren@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Round up allocations with kmalloc_size_roundup() so that openvswitch's
use of ksize() is always accurate and no special handling of the memory
is needed by KASAN, UBSAN_BOUNDS, nor FORTIFY_SOURCE.
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221018090628.never.537-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jie Meng says:
====================
With baseline x64 instruction set, shift count can only be an immediate
or in %cl. The implicit dependency on %cl makes it necessary to shuffle
registers around and/or add push/pop operations.
BMI2 provides shift instructions that can use any general register as
the shift count, saving us instructions and a few bytes in most cases.
Suboptimal codegen when %ecx is source and/or destination is also
addressed and unnecessary instructions are removed.
test_progs: Summary: 267/1340 PASSED, 25 SKIPPED, 0 FAILED
test_progs-no_alu32: Summary: 267/1333 PASSED, 26 SKIPPED, 0 FAILED
test_verifier: Summary: 1367 PASSED, 636 SKIPPED, 0 FAILED (same result
with or without BMI2)
test_maps: OK, 0 SKIPPED
lib/test_bpf:
test_bpf: Summary: 1026 PASSED, 0 FAILED, [1014/1014 JIT'ed]
test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed]
test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED
---
v4 -> v5:
- More comments regarding instruction encoding
v3 -> v4:
- Fixed a regression when BMI2 isn't available
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current tests cover only shifts with an immediate as the source
operand/shift counts; add a new test case to cover register operand.
Signed-off-by: Jie Meng <jmeng@fb.com>
Link: https://lore.kernel.org/r/20221007202348.1118830-4-jmeng@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BMI2 provides 3 shift instructions (shrx, sarx and shlx) that use VEX
encoding but target general purpose registers [1]. They allow the shift
count in any general purpose register and have the same performance as
non BMI2 shift instructions [2].
Instead of shr/sar/shl that implicitly use %cl (lowest 8 bit of %rcx),
emit their more flexible alternatives provided in BMI2 when advantageous;
keep using the non BMI2 instructions when shift count is already in
BPF_REG_4/%rcx as non BMI2 instructions are shorter.
To summarize, when BMI2 is available:
-------------------------------------------------
| arbitrary dst
=================================================
src == ecx | shl dst, cl
-------------------------------------------------
src != ecx | shlx dst, dst, src
-------------------------------------------------
And no additional register shuffling is needed.
A concrete example between non BMI2 and BMI2 codegen. To shift %rsi by
%rdi:
Without BMI2:
ef3: push %rcx
51
ef4: mov %rdi,%rcx
48 89 f9
ef7: shl %cl,%rsi
48 d3 e6
efa: pop %rcx
59
With BMI2:
f0b: shlx %rdi,%rsi,%rsi
c4 e2 c1 f7 f6
[1] https://en.wikipedia.org/wiki/X86_Bit_manipulation_instruction_set
[2] https://www.agner.org/optimize/instruction_tables.pdf
Signed-off-by: Jie Meng <jmeng@fb.com>
Link: https://lore.kernel.org/r/20221007202348.1118830-3-jmeng@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
x64 JIT produces redundant instructions when a shift operation's
destination register is BPF_REG_4/ecx and this patch removes them.
Specifically, when dest reg is BPF_REG_4 but the src isn't, we
needn't push and pop ecx around shift only to get it overwritten
by r11 immediately afterwards.
In the rare case when both dest and src registers are BPF_REG_4,
a single shift instruction is sufficient and we don't need the
two MOV instructions around the shift.
To summarize using shift left as an example, without patch:
-------------------------------------------------
| dst == ecx | dst != ecx
=================================================
src == ecx | mov r11, ecx | shl dst, cl
| shl r11, ecx |
| mov ecx, r11 |
-------------------------------------------------
src != ecx | mov r11, ecx | push ecx
| push ecx | mov ecx, src
| mov ecx, src | shl dst, cl
| shl r11, cl | pop ecx
| pop ecx |
| mov ecx, r11 |
-------------------------------------------------
With patch:
-------------------------------------------------
| dst == ecx | dst != ecx
=================================================
src == ecx | shl ecx, cl | shl dst, cl
-------------------------------------------------
src != ecx | mov r11, ecx | push ecx
| mov ecx, src | mov ecx, src
| shl r11, cl | shl dst, cl
| mov ecx, r11 | pop ecx
-------------------------------------------------
Signed-off-by: Jie Meng <jmeng@fb.com>
Link: https://lore.kernel.org/r/20221007202348.1118830-2-jmeng@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko says:
====================
Make libbpf more conservative in using BPF_F_MMAPABLE flag with internal BPF
array maps that are backing global data sections. See patch #2 for full
description and justification.
Changes in this dataset support having bpf_spinlock, kptr, rb_tree nodes and
other "special" variables as global variables. Combining this with libbpf's
existing support for multiple custom .data.* sections allows BPF programs to
utilize multiple spinlock/rbtree_node/kptr variables in a pretty natural way
by just putting all such variables into separate data sections (and thus ARRAY
maps).
v1->v2:
- address Stanislav's feedback, adds acks.
====================
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add non-mmapable data section to test_skeleton selftest and make sure it
really isn't mmapable by trying to mmap() it anyways.
Also make sure that libbpf doesn't report BPF_F_MMAPABLE flag to users.
Additional, some more manual testing was performed that this feature
works as intended.
Looking at created map through bpftool shows that flags passed to kernel are
indeed zero:
$ bpftool map show
...
1782: array name .data.non_mmapa flags 0x0
key 4B value 16B max_entries 1 memlock 4096B
btf_id 1169
pids test_progs(8311)
...
Checking BTF uploaded to kernel for this map shows that zero_key and
zero_value are indeed marked as static, even though zero_key is actually
original global (but STV_HIDDEN) variable:
$ bpftool btf dump id 1169
...
[51] VAR 'zero_key' type_id=2, linkage=static
[52] VAR 'zero_value' type_id=7, linkage=static
...
[62] DATASEC '.data.non_mmapable' size=16 vlen=2
type_id=51 offset=0 size=4 (VAR 'zero_key')
type_id=52 offset=4 size=12 (VAR 'zero_value')
...
And original BTF does have zero_key marked as linkage=global:
$ bpftool btf dump file test_skeleton.bpf.linked3.o
...
[51] VAR 'zero_key' type_id=2, linkage=global
[52] VAR 'zero_value' type_id=7, linkage=static
...
[62] DATASEC '.data.non_mmapable' size=16 vlen=2
type_id=51 offset=0 size=4 (VAR 'zero_key')
type_id=52 offset=4 size=12 (VAR 'zero_value')
Bpftool didn't require any changes at all because it checks whether internal
map is mmapable already, but just to double-check generated skeleton, we
see that .data.non_mmapable neither sets mmaped pointer nor has
a corresponding field in the skeleton:
$ grep non_mmapable test_skeleton.skel.h
struct bpf_map *data_non_mmapable;
s->maps[7].name = ".data.non_mmapable";
s->maps[7].map = &obj->maps.data_non_mmapable;
But .data.read_mostly has all of those things:
$ grep read_mostly test_skeleton.skel.h
struct bpf_map *data_read_mostly;
struct test_skeleton__data_read_mostly {
int read_mostly_var;
} *data_read_mostly;
s->maps[6].name = ".data.read_mostly";
s->maps[6].map = &obj->maps.data_read_mostly;
s->maps[6].mmaped = (void **)&obj->data_read_mostly;
_Static_assert(sizeof(s->data_read_mostly->read_mostly_var) == 4, "unexpected size of 'read_mostly_var'");
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221019002816.359650-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Teach libbpf to not add BPF_F_MMAPABLE flag unnecessarily for ARRAY maps
that are backing data sections, if such data sections don't expose any
variables to user-space. Exposed variables are those that have
STB_GLOBAL or STB_WEAK ELF binding and correspond to BTF VAR's
BTF_VAR_GLOBAL_ALLOCATED linkage.
The overall idea is that if some data section doesn't have any variable that
is exposed through BPF skeleton, then there is no reason to make such
BPF array mmapable. Making BPF array mmapable is not a free no-op
action, because BPF verifier doesn't allow users to put special objects
(such as BPF spin locks, RB tree nodes, linked list nodes, kptrs, etc;
anything that has a sensitive internal state that should not be modified
arbitrarily from user space) into mmapable arrays, as there is no way to
prevent user space from corrupting such sensitive state through direct
memory access through memory-mapped region.
By making sure that libbpf doesn't add BPF_F_MMAPABLE flag to BPF array
maps corresponding to data sections that only have static variables
(which are not supposed to be visible to user space according to libbpf
and BPF skeleton rules), users now can have spinlocks, kptrs, etc in
either default .bss/.data sections or custom .data.* sections (assuming
there are no global variables in such sections).
The only possible hiccup with this approach is the need to use global
variables during BPF static linking, even if it's not intended to be
shared with user space through BPF skeleton. To allow such scenarios,
extend libbpf's STV_HIDDEN ELF visibility attribute handling to
variables. Libbpf is already treating global hidden BPF subprograms as
static subprograms and adjusts BTF accordingly to make BPF verifier
verify such subprograms as static subprograms with preserving entire BPF
verifier state between subprog calls. This patch teaches libbpf to treat
global hidden variables as static ones and adjust BTF information
accordingly as well. This allows to share variables between multiple
object files during static linking, but still keep them internal to BPF
program and not get them exposed through BPF skeleton.
Note, that if the user has some advanced scenario where they absolutely
need BPF_F_MMAPABLE flag on .data/.bss/.rodata BPF array map despite
only having static variables, they still can achieve this by forcing it
through explicit bpf_map__set_map_flags() API.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20221019002816.359650-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor libbpf's BTF fixup step during BPF object open phase. The only
functional change is that we now ignore BTF_VAR_GLOBAL_EXTERN variables
during fix up, not just BTF_VAR_STATIC ones, which shouldn't cause any
change in behavior as there shouldn't be any extern variable in data
sections for valid BPF object anyways.
Otherwise it's just collapsing two functions that have no reason to be
separate, and switching find_elf_var_offset() helper to return entire
symbol pointer, not just its offset. This will be used by next patch to
get ELF symbol visibility.
While refactoring, also "normalize" debug messages inside
btf_fixup_datasec() to follow general libbpf style and print out data
section name consistently, where it's available.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221019002816.359650-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Change return value of rk817_chg_cur_to_reg from u8 to int. If the
function fails to find a suitable value it returns a -EINVAL, but
defined as a u8 it would not return correctly. Additionally, change
defined variable that stores return value from u8 to int.
Fixes: 11cb8da018 ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This code checks "->chg_ps" twice when it was supposed to check
"->bat_ps".
Fixes: 11cb8da018 ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When we delete or rename a directory we must also drop any cached lease we have
on the directory.
Fixes: a350d6e73f5e ("cifs: enable caching of directories for which a lease is held")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Missing flowi uid field in nft_fib expression, from Guillaume Nault.
This is broken since the creation of the fib expression.
2) Relax sanity check to fix bogus EINVAL error when deleting elements
belonging set intervals. Broken since 6.0-rc.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements
netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces.
====================
Link: https://lore.kernel.org/r/20221019065225.1006344-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This brings the text markup in line with sysctl/abi and
sysctl/kernel:
* the entries are ordered alphabetically
* the table of contents is automatically generated
* markup is used as appropriate for constants etc.
The content isn't fully up-to-date but the obsolete entries are gone,
so remove the kernel version mention.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220930102937.135841-6-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
These were removed in 2.4.7.8. Remove references to super-max and
super-nr in the sysctl documentation.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220930102937.135841-5-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are two sections documenting aio-nr and aio-max-nr, merge them.
I kept the second explanation of aio-nr, which seems clearer to me,
along with the effects of the values from the first section.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220930102937.135841-4-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
dquot-max was removed in 2.4.10.5; dquot-nr was replaced with dqstats
in 2.5.18 which is now /proc/sys/fs/quota. Remove references to
dquot-max and dquot-nr in the sysctl documentation.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220930102937.135841-3-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Update Kishon's email address in PCI endpoint subsystem maintainer
entry and mark him as reviewer.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The only (forced) static test binary doesn't depend on libcap. Because
using -lcap on systems that don't have such static library would fail
(e.g. on Arch Linux), let's be more specific and require only dynamic
libcap linking.
Fixes: a52540522c ("selftests/landlock: Fix out-of-tree builds")
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20221019200536.2771316-1-mic@digikod.net
Address a bunch of kdoc warnings:
include/net/genetlink.h:81: warning: Function parameter or member 'module' not described in 'genl_family'
include/net/genetlink.h:243: warning: expecting prototype for struct genl_info. Prototype was for struct genl_dumpit_info instead
include/net/genetlink.h:419: warning: Function parameter or member 'net' not described in 'genlmsg_unicast'
include/net/genetlink.h:438: warning: expecting prototype for gennlmsg_data(). Prototype was for genlmsg_data() instead
include/net/genetlink.h:244: warning: Function parameter or member 'op' not described in 'genl_dumpit_info'
Link: https://lore.kernel.org/r/20221018231310.1040482-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree says:
====================
netlink: formatted extacks
Currently, netlink extacks can only carry fixed string messages, which
is limiting when reporting failures in complex systems. This series
adds the ability to return printf-formatted messages, and uses it in
the sfc driver's TC offload code.
Formatted extack messages are limited in length to a fixed buffer size,
currently 80 characters. If the message exceeds this, the full message
will be logged (ratelimited) to the console and a truncated version
returned over netlink.
There is no change to the netlink uAPI; only internal kernel changes
are needed.
====================
Link: https://lore.kernel.org/r/cover.1666102698.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It no longer does anything now that we're using formatted extacks instead.
So we can remove the driver's whole get/set priv_flags implementation.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since we can now get a formatted message back to the user with
NL_SET_ERR_MSG_FMT_MOD(), there's no need for our special logging.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Include an 80-byte buffer in struct netlink_ext_ack that can be used
for scnprintf()ed messages. This does mean that the resulting string
can't be enumerated, translated etc. in the way NL_SET_ERR_MSG() was
designed to allow.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we compile-in the CCI along with the imx412 driver and run on the RB5
we see that i2c_add_adapter() causes the probe of the imx412 driver to
happen.
This probe tries to perform an i2c xfer() and the xfer() in i2c-qcom-cci.c
fails on pm_runtime_get() because the i2c-qcom-cci.c::probe() function has
not completed to pm_runtime_enable(dev).
Fix this sequence by ensuring pm_runtime_xxx() calls happen prior to adding
the i2c adapter.
Fixes: e517526195 ("i2c: Add Qualcomm CCI I2C driver")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
