powerpc 32-bit system call (and function) calling convention for 64-bit
arguments requires the next available odd-pair (two sequential registers
with the first being odd-numbered) from the standard register argument
allocation.
The first argument register is r3, so a 64-bit argument that appears at
an even position in the argument list must skip a register (unless there
were preceding 64-bit arguments, which might throw things off). This
requires non-standard compat definitions to deal with the holes in the
argument register allocation.
With pt_regs syscall wrappers which use a standard mapper to map pt_regs
GPRs to function arguments, 32-bit kernels hit the same basic problem,
the standard definitions don't cope with the unused argument registers.
Fix this by having 32-bit kernels share those syscall definitions with
compat.
Thanks to Jason for spending a lot of time finding and bisecting this
and developing a trivial reproducer. The perfect bug report.
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Fixes: 7e92e01b72 ("powerpc: Provide syscall wrapper")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221012035335.866440-1-npiggin@gmail.com
- add NVME_QUIRK_BOGUS_NID for Lexar NM760 (Abhijit)
- avoid the deepest sleep state on ZHITAI TiPro5000 SSDs (Xi Ruoyao)
- fix possible hang caused during ctrl deletion (Sagi Grimberg)
- fix possible hang in live ns resize with ANA access (Sagi Grimberg)
-----BEGIN PGP SIGNATURE-----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=z547
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.1-2022-10-12' of git://git.infradead.org/nvme into block-6.1
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.1
- add NVME_QUIRK_BOGUS_NID for Lexar NM760 (Abhijit)
- avoid the deepest sleep state on ZHITAI TiPro5000 SSDs (Xi Ruoyao)
- fix possible hang caused during ctrl deletion (Sagi Grimberg)
- fix possible hang in live ns resize with ANA access (Sagi Grimberg)"
* tag 'nvme-6.1-2022-10-12' of git://git.infradead.org/nvme:
nvme-multipath: fix possible hang in live ns resize with ANA access
nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDs
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760
nvme-tcp: fix possible hang caused during ctrl deletion
nvme-rdma: fix possible hang caused during ctrl deletion
kernel/trace/ring_buffer.c:895: warning: expecting prototype for ring_buffer_nr_pages_dirty(). Prototype was for ring_buffer_nr_dirty_pages() instead.
kernel/trace/ring_buffer.c:5313: warning: expecting prototype for ring_buffer_reset_cpu(). Prototype was for ring_buffer_reset_online_cpus() instead.
kernel/trace/ring_buffer.c:5382: warning: expecting prototype for rind_buffer_empty(). Prototype was for ring_buffer_empty() instead.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2340
Link: https://lkml.kernel.org/r/20221009020642.12506-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, we have a bug where a simultaneous DROPTAG ioctl and socket
close may race, as we attempt to remove a key from lists twice, and
perform an unref for each removal operation. This may result in a uaf
when we attempt the second unref.
This change fixes the race by making __mctp_key_remove tolerant to being
called on a key that has already been removed from the socket/net lists,
and only performs the unref when we do the actual remove. We also need
to hold the list lock on the ioctl cleanup path.
This fix is based on a bug report and comprehensive analysis from
butt3rflyh4ck <butterflyhuangxx@gmail.com>, found via syzkaller.
Cc: stable@vger.kernel.org
Fixes: 63ed1aab3d ("mctp: Add SIOCMCTP{ALLOC,DROP}TAG ioctls for tag control")
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal says:
====================
netfilter fixes for net
This series from Phil Sutter for the *net* tree fixes a problem with a change
from the 6.1 development phase: the change to nft_fib should have used
the more recent flowic_l3mdev field. Pointed out by Guillaume Nault.
This also makes the older iptables module follow the same pattern.
Also add selftest case and avoid test failure in nft_fib.sh when the
host environment has set rp_filter=1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If net.ipv4.conf.all.rp_filter is set, it overrides the per-interface
setting and thus defeats the fix from bbe4c0896d ("selftests:
netfilter: disable rp_filter on router"). Unset it as well to cover that
case.
Fixes: bbe4c0896d ("selftests: netfilter: disable rp_filter on router")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Use the introduced field for correct operation with VRF devices instead
of conditionally overwriting flowic_oif. This is a partial revert of
commit b575b24b8e ("netfilter: Fix rpfilter dropping vrf packets by
mistake"), implementing a simpler solution.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Test reverse path (filter) matches in iptables, ip6tables and nftables.
Both with a regular interface and a VRF.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
When ftrace bug happened, following log shows every hex data in
problematic ip address:
actual: ffffffe8:6b:ffffffd9:01:21
But so many 'f's seem a little confusing, and that is because format
'%x' being used to print signed chars in array 'ins'. As suggested
by Joe, change to use format "%*phC" to print array 'ins'.
After this patch, the log is like:
actual: e8:6b:d9:01:21
Link: https://lkml.kernel.org/r/20221011120352.1878494-1-zhengyejian1@huawei.com
Fixes: 6c14133d2d ("ftrace: Do not blindly read the ip address in ftrace_bug()")
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
With DEBUG defined, any frame received will see its MHR fields (fc and
addresses, mainly) being printed in the kernel log buffer,
unconditionally. In most cases this is fine, but in some specific cases
(like Acknowledgment frames, where both the source and destination
addressing fields are omitted), it displays garbage which is
misleading.
Only print the addressing fields when they are present, which clarifies
the logs.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220905202724.1322046-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
We must avoid the situation where one interface disables address
filtering and AACK on the PHY while another interface expects to run
with AACK and address filtering enabled. Just ignore the frames on the
concerned interface if this happens.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221007085310.503366-8-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
This IEEE802154_HW_RX_DROP_BAD_CKSUM flag was only used by hwsim to
reflect the fact that it would not validate the checksum (FCS). So this
was only useful while the only filtering level hwsim was capable of was
"NONE". Now that the driver has been improved we no longer need this
flag.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221007085310.503366-7-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
We have access to the address filters being theoretically applied, we
also have access to the actual filtering level applied, so let's add a
proper frame validation sequence in hwsim.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221007085310.503366-6-miquel.raynal@bootlin.com
[stefan@datenfreihafen.org: fixup some checkpatch warnings]
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
As a first step, introduce a basic implementation for the
->set_hw_addr_filt() hook. In a second step, the values recorded here
will be used to perform proper filtering during reception.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221007085310.503366-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The current filtering level is set on the first interface up on a wpan
phy. If we support scan functionality we need to change the filtering
level on the fly on an operational phy and switching back again.
This patch will move the receive mode parameter e.g. address filter and
promiscuous mode to the drv_start() functionality to allow changing the
receive mode on an operational phy not on first ifup only. In future this
should be handled on driver layer because each hardware has it's own way
to enter a specific filtering level. However this should offer to switch
to mode IEEE802154_FILTERING_NONE and back to
IEEE802154_FILTERING_4_FRAME_FIELDS.
Only IEEE802154_FILTERING_4_FRAME_FIELDS and IEEE802154_FILTERING_NONE
are somewhat supported by current hardware. All other filtering levels
can be supported in future but will end in IEEE802154_FILTERING_NONE as
the receive part can kind of "emulate" those receive paths by doing
additional filtering routines.
There are in total three filtering levels in the code:
- the per-interface default level (should not be changed)
- the required per-interface level (mac commands may play with it)
- the actual per-PHY (hw) level that is currently in use
Signed-off-by: Alexander Aring <aahringo@redhat.com>
[<miquel.raynal@bootlin.com: Add the third filtering variable]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20221007085310.503366-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
This patch moves all receive parameters above the drv_start()
functionality to make it accessibile in the drv_start() function.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20221007085310.503366-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The 802154 specification details several filtering levels in which the
PHY and the MAC could be. The amount of filtering will vary if they are
in promiscuous mode or in scanning mode. Otherwise they are expected to
do some very basic checks, such as enforcing the frame validity. Either
the PHY is able to do so, and the MAC has nothing to do, or the PHY has
a lower filtering level than expected and the MAC should take over.
For now we just define these levels in an enumeration.
In a second time, we will add a per-PHY parameter showing the expected
filtering level as well as a per device current filtering level, and
will initialize all these fields.
In a third time, we will use them to apply more filtering by software
when the PHY is limited.
Indeed, if the drivers know they cannot reach the requested level of
filtering, they will overwrite the "current filtering" parameter so that
it reflects what they do. Then, in the core, the expected filtering
level will be used to decide whether some additional software processing
is needed or not.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221007085310.503366-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
When we revalidate paths as part of ns size change (as of commit
e7d65803e2), it is possible that during the path revalidation, the
only paths that is IO capable (i.e. optimized/non-optimized) are the
ones that ns resize was not yet informed to the host, which will cause
inflight requests to be requeued (as we have available paths but none
are IO capable). These requests on the requeue list are waiting for
someone to resubmit them at some point.
The IO capable paths will eventually notify the ns resize change to the
host, but there is nothing that will kick the requeue list to resubmit
the queued requests.
Fix this by always kicking the requeue list, and if no IO capable path
exists, these requests will be queued again.
A typical log that indicates that IOs are requeued:
--
nvme nvme1: creating 4 I/O queues.
nvme nvme1: new ctrl: "testnqn1"
nvme nvme2: creating 4 I/O queues.
nvme nvme2: mapped 4/0/0 default/read/poll queues.
nvme nvme2: new ctrl: NQN "testnqn1", addr 127.0.0.1:8009
nvme nvme1: rescanning namespaces.
nvme1n1: detected capacity change from 2097152 to 4194304
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
nvme nvme2: rescanning namespaces.
--
Reported-by: Yogev Cohen <yogev@lightbitslabs.com>
Fixes: e7d65803e2 ("nvme-multipath: revalidate paths during rescan")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Christoph Hellwig <hch@lst.de>
When we delete a controller, we execute the following:
1. nvme_stop_ctrl() - stop some work elements that may be
inflight or scheduled (specifically also .stop_ctrl
which cancels ctrl error recovery work)
2. nvme_remove_namespaces() - which first flushes scan_work
to avoid competing ns addition/removal
3. continue to teardown the controller
However, if err_work was scheduled to run in (1), it is designed to
cancel any inflight I/O, particularly I/O that is originating from ns
scan_work in (2), but because it is cancelled in .stop_ctrl(), we can
prevent forward progress of (2) as ns scanning is blocking on I/O
(that will never be cancelled).
The race is:
1. transport layer error observed -> err_work is scheduled
2. scan_work executes, discovers ns, generate I/O to it
3. nvme_ctop_ctrl() -> .stop_ctrl() -> cancel_work_sync(err_work)
- err_work never executed
4. nvme_remove_namespaces() -> flush_work(scan_work)
--> deadlock, because scan_work is blocked on I/O that was supposed
to be cancelled by err_work, but was cancelled before executing (see
stack trace [1]).
Fix this by flushing err_work instead of cancelling it, to force it
to execute and cancel all inflight I/O.
[1]:
--
Call Trace:
<TASK>
__schedule+0x390/0x910
? scan_shadow_nodes+0x40/0x40
schedule+0x55/0xe0
io_schedule+0x16/0x40
do_read_cache_page+0x55d/0x850
? __page_cache_alloc+0x90/0x90
read_cache_page+0x12/0x20
read_part_sector+0x3f/0x110
amiga_partition+0x3d/0x3e0
? osf_partition+0x33/0x220
? put_partition+0x90/0x90
bdev_disk_changed+0x1fe/0x4d0
blkdev_get_whole+0x7b/0x90
blkdev_get_by_dev+0xda/0x2d0
device_add_disk+0x356/0x3b0
nvme_mpath_set_live+0x13c/0x1a0 [nvme_core]
? nvme_parse_ana_log+0xae/0x1a0 [nvme_core]
nvme_update_ns_ana_state+0x3a/0x40 [nvme_core]
nvme_mpath_add_disk+0x120/0x160 [nvme_core]
nvme_alloc_ns+0x594/0xa00 [nvme_core]
nvme_validate_or_alloc_ns+0xb9/0x1a0 [nvme_core]
? __nvme_submit_sync_cmd+0x1d2/0x210 [nvme_core]
nvme_scan_work+0x281/0x410 [nvme_core]
process_one_work+0x1be/0x380
worker_thread+0x37/0x3b0
? process_one_work+0x380/0x380
kthread+0x12d/0x150
? set_kthread_struct+0x50/0x50
ret_from_fork+0x1f/0x30
</TASK>
INFO: task nvme:6725 blocked for more than 491 seconds.
Not tainted 5.15.65-f0.el7.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:nvme state:D
stack: 0 pid: 6725 ppid: 1761 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x390/0x910
? sched_clock+0x9/0x10
schedule+0x55/0xe0
schedule_timeout+0x24b/0x2e0
? try_to_wake_up+0x358/0x510
? finish_task_switch+0x88/0x2c0
wait_for_completion+0xa5/0x110
__flush_work+0x144/0x210
? worker_attach_to_pool+0xc0/0xc0
flush_work+0x10/0x20
nvme_remove_namespaces+0x41/0xf0 [nvme_core]
nvme_do_delete_ctrl+0x47/0x66 [nvme_core]
nvme_sysfs_delete.cold.96+0x8/0xd [nvme_core]
dev_attr_store+0x14/0x30
sysfs_kf_write+0x38/0x50
kernfs_fop_write_iter+0x146/0x1d0
new_sync_write+0x114/0x1b0
? intel_pmu_handle_irq+0xe0/0x420
vfs_write+0x18d/0x270
ksys_write+0x61/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
--
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When we delete a controller, we execute the following:
1. nvme_stop_ctrl() - stop some work elements that may be
inflight or scheduled (specifically also .stop_ctrl
which cancels ctrl error recovery work)
2. nvme_remove_namespaces() - which first flushes scan_work
to avoid competing ns addition/removal
3. continue to teardown the controller
However, if err_work was scheduled to run in (1), it is designed to
cancel any inflight I/O, particularly I/O that is originating from ns
scan_work in (2), but because it is cancelled in .stop_ctrl(), we can
prevent forward progress of (2) as ns scanning is blocking on I/O
(that will never be cancelled).
The race is:
1. transport layer error observed -> err_work is scheduled
2. scan_work executes, discovers ns, generate I/O to it
3. nvme_ctop_ctrl() -> .stop_ctrl() -> cancel_work_sync(err_work)
- err_work never executed
4. nvme_remove_namespaces() -> flush_work(scan_work)
--> deadlock, because scan_work is blocked on I/O that was supposed
to be cancelled by err_work, but was cancelled before executing.
Fix this by flushing err_work instead of cancelling it, to force it
to execute and cancel all inflight I/O.
Fixes: b435ecea2a ("nvme: Add .stop_ctrl to nvme ctrl ops")
Fixes: f6c8e432cb ("nvme: flush namespace scanning work just before removing namespaces")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commit 3e7abf8141 ("drm/i915: Extract GT render power state management")
removes the "trace_intel_gpu_freq_change()" trace points but
their definition was left without users. Remove it.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011135940.367048-1-andi.shyti@linux.intel.com
Prior to commit 69e3b846d8 ("arm64: mte: Sync tags for pages where PTE
is untagged"), mte_sync_tags() was only called for pte_tagged() entries
(those mapped with PROT_MTE). Therefore mte_sync_tags() could safely use
test_and_set_bit(PG_mte_tagged, &page->flags) without inadvertently
setting PG_mte_tagged on an untagged page.
The above commit was required as guests may enable MTE without any
control at the stage 2 mapping, nor a PROT_MTE mapping in the VMM.
However, the side-effect was that any page with a PTE that looked like
swap (or migration) was getting PG_mte_tagged set automatically. A
subsequent page copy (e.g. migration) copied the tags to the destination
page even if the tags were owned by KASAN.
This issue was masked by the page_kasan_tag_reset() call introduced in
commit e5b8d92189 ("arm64: mte: reset the page tag in page->flags").
When this commit was reverted (20794545c1), KASAN started reporting
access faults because the overriding tags in a page did not match the
original page->flags (with CONFIG_KASAN_HW_TAGS=y):
BUG: KASAN: invalid-access in copy_page+0x10/0xd0 arch/arm64/lib/copy_page.S:26
Read at addr f5ff000017f2e000 by task syz-executor.1/2218
Pointer tag: [f5], memory tag: [f2]
Move the PG_mte_tagged bit setting from mte_sync_tags() to the actual
place where tags are cleared (mte_sync_page_tags()) or restored
(mte_restore_tags()).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: syzbot+c2c79c6d6eddc5262b77@syzkaller.appspotmail.com
Fixes: 69e3b846d8 ("arm64: mte: Sync tags for pages where PTE is untagged")
Cc: <stable@vger.kernel.org> # 5.14.x
Cc: Steven Price <steven.price@arm.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/0000000000004387dc05e5888ae5@google.com/
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20221006163354.3194102-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ido reported that a kernel warning [1] can be triggered from
user space when the kernel is compiled with CONFIG_MODULES=y and
CONFIG_XFRM=n when adding an xfrm encap type route, e.g:
$ ip route add 198.51.100.0/24 dev dummy1 encap xfrm if_id 1
Error: lwt encapsulation type not supported.
The reason for the warning is that the LWT infrastructure has an
autoloading feature which is meant only for encap types that don't
use a net device, which is not the case in xfrm encap.
Mute this warning for xfrm encap as there's no encap module to autoload
in this case.
[1]
WARNING: CPU: 3 PID: 2746262 at net/core/lwtunnel.c:57 lwtunnel_valid_encap_type+0x4f/0x120
[...]
Call Trace:
<TASK>
rtm_to_fib_config+0x211/0x350
inet_rtm_newroute+0x3a/0xa0
rtnetlink_rcv_msg+0x154/0x3c0
netlink_rcv_skb+0x49/0xf0
netlink_unicast+0x22f/0x350
netlink_sendmsg+0x208/0x440
____sys_sendmsg+0x21f/0x250
___sys_sendmsg+0x83/0xd0
__sys_sendmsg+0x54/0xa0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Reported-by: Ido Schimmel <idosch@idosch.org>
Fixes: 2c2493b9da ("xfrm: lwtunnel: add lwtunnel support for xfrm interfaces in collect_md mode")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The commit in the "Fixes" tag tried to avoid a case where policy check
is ignored due to dst caching in next hops.
However, when the traffic is locally consumed, the dst may be cached
in a local TCP or UDP socket as part of early demux. In this case the
"disable_policy" flag is not checked as ip_route_input_noref() was only
called before caching, and thus, packets after the initial packet in a
flow will be dropped if not matching policies.
Fix by checking the "disable_policy" flag also when a valid dst is
already available.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216557
Reported-by: Monil Patel <monil191989@gmail.com>
Fixes: e6175a2ed1 ("xfrm: fix "disable_policy" flag use when arriving from different devices")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
----
v2: use dev instead of skb->dev
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This add ACPI-based generic laptop driver for Loongson-3. Some of the
codes are derived from drivers/platform/x86/thinkpad_acpi.c.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
BPF programs are normally handled by a BPF interpreter, add BPF JIT
support for LoongArch to allow the kernel to generate native code when
a program is loaded into the kernel. This will significantly speed-up
processing of BPF programs.
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
{signed,unsigned}_imm_check() will also be used in the bpf jit, so move
them from module.c to inst.h, this is preparation for later patches.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This patch adds support for kdump. In kdump case the normal kernel will
reserve a region for the crash kernel and jump there on panic.
Arch-specific functions are added to allow for implementing a crash dump
file interface, /proc/vmcore, which can be viewed as a ELF file.
A user-space tool, such as kexec-tools, is responsible for allocating a
separate region for the core's ELF header within the crash kdump kernel
memory and filling it in when executing kexec_load().
Then, its location will be advertised to the crash dump kernel via a
command line argument "elfcorehdr=", and the crash dump kernel will
preserve this region for later use with arch_reserve_vmcore() at boot
time.
At the same time, the crash kdump kernel is also limited within the
"crashkernel" area via a command line argument "mem=", so as not to
destroy the original kernel dump data.
In the crash dump kernel environment, /proc/vmcore is used to access the
primary kernel's memory with copy_oldmem_page().
I tested kdump on LoongArch machines (Loongson-3A5000) and it works as
expected (suggested crashkernel parameter is "crashkernel=512M@2560M"),
you may test it by triggering a crash through /proc/sysrq-trigger:
$ sudo kexec -p /boot/vmlinux-kdump --reuse-cmdline --append="nr_cpus=1"
# echo c > /proc/sysrq-trigger
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add three new files, kexec.h, machine_kexec.c and relocate_kernel.S to
the LoongArch architecture, so as to add support for the kexec re-boot
mechanism (CONFIG_KEXEC) on LoongArch platforms.
Kexec supports loading vmlinux.elf in ELF format and vmlinux.efi in PE
format.
I tested kexec on LoongArch machines (Loongson-3A5000) and it works as
expected:
$ sudo kexec -l /boot/vmlinux.efi --reuse-cmdline
$ sudo kexec -e
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Inspired by commit 9fb7410f955("arm64/BUG: Use BRK instruction for
generic BUG traps"), do similar for LoongArch to use generic BUG()
handler.
This patch uses the BREAK software breakpoint instruction to generate
a trap instead, similarly to most other arches, with the generic BUG
code generating the dmesg boilerplate.
This allows bug metadata to be moved to a separate table and reduces
the amount of inline code at BUG() and WARN() sites. This also avoids
clobbering any registers before they can be dumped.
To mitigate the size of the bug table further, this patch makes use of
the existing infrastructure for encoding addresses within the bug table
as 32-bit relative pointers instead of absolute pointers.
(Note: this limits the max kernel size to 2GB.)
Before patch:
[ 3018.338013] lkdtm: Performing direct entry BUG
[ 3018.342445] Kernel bug detected[#5]:
[ 3018.345992] CPU: 2 PID: 865 Comm: cat Tainted: G D 6.0.0-rc6+ #35
After patch:
[ 125.585985] lkdtm: Performing direct entry BUG
[ 125.590433] ------------[ cut here ]------------
[ 125.595020] kernel BUG at drivers/misc/lkdtm/bugs.c:78!
[ 125.600211] Oops - BUG[#1]:
[ 125.602980] CPU: 3 PID: 410 Comm: cat Not tainted 6.0.0-rc6+ #36
Out-of-line file/line data information obtained compared to before.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The perf events infrastructure of LoongArch is very similar to old MIPS-
based Loongson, so most of the codes are derived from MIPS.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
We can support more cache attributes (e.g., CC, SUC and WUC) and page
protection when we use TLB for ioremap(). The implementation is based
on GENERIC_IOREMAP.
The existing simple ioremap() implementation has better performance so
we keep it and introduce ARCH_IOREMAP to control the selection.
We move pagetable_init() earlier to make early ioremap() works, and we
modify the PCI ecam mapping because the TLB-based version of ioremap()
will actually take the size into account.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Accidental access to /dev/mem is obviously disastrous, but specific
access can be used by people debugging the kernel. So select GENERIC_
LIB_DEVMEM_IS_ALLOWED, as well as define ARCH_HAS_VALID_PHYS_ADDR_RANGE
and related helpers, to support access filter to /dev/mem interface.
Signed-off-by: Weihao Li <liweihao@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Current cache probe and flush methods have some drawbacks:
1, Assume there are 3 cache levels and only 3 levels;
2, Assume L1 = I + D, L2 = V, L3 = S, V is exclusive, S is inclusive.
However, the fact is I + D, I + D + V, I + D + S and I + D + V + S are
all valid. So, refactor the cache probe and flush methods to adapt more
types of cache hierarchy.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This patch simplifies TLB load, store and modify exception handlers:
1. Reduce instructions, such as alu/csr and memory access;
2. Execute tlb search instruction only in the fast path;
3. Return directly from the fast path for both normal and huge pages;
4. Re-tab the assembly for better vertical alignment.
And fixes the concurrent modification issue of fast path for huge pages.
This issue will occur in the following steps:
CPU-1 (In TLB exception) CPU-2 (In THP splitting)
1: Load PMD entry (HUGE=1)
2: Goto huge path
3: Store PMD entry (HUGE=0)
4: Reload PMD entry (HUGE=0)
5: Fill TLB entry (PA is incorrect)
This patch also slightly improves the TLB processing performance:
* Normal pages: 2.15%, Huge pages: 1.70%.
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
int main(int argc, char *argv[])
{
size_t page_size;
size_t mem_size;
size_t off;
void *base;
int flags;
int i;
if (argc < 2) {
fprintf(stderr, "%s MEM_SIZE [HUGE]\n", argv[0]);
return -1;
}
page_size = sysconf(_SC_PAGESIZE);
flags = MAP_PRIVATE | MAP_ANONYMOUS;
mem_size = strtoul(argv[1], NULL, 10);
if (argc > 2)
flags |= MAP_HUGETLB;
for (i = 0; i < 10; i++) {
base = mmap(NULL, mem_size, PROT_READ, flags, -1, 0);
if (base == MAP_FAILED) {
fprintf(stderr, "Map memory failed!\n");
return -1;
}
for (off = 0; off < mem_size; off += page_size)
*(volatile int *)(base + off);
munmap(base, mem_size);
}
return 0;
}
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
GCC >= 13 and GNU assembler >= 2.40 use these relocations to address
external symbols, so we need to add them.
Let the module loader emit GOT entries for data symbols so we would be
able to handle GOT relocations. The GOT entry is just the data's symbol
address.
In module.lds, emit a stub .got section for a section header entry. The
actual content of the section entry will be filled at runtime by module_
frob_arch_sections().
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Binutils >= 2.40 uses R_LARCH_B26 instead of R_LARCH_SOP_PUSH_PLT_PCREL,
and R_LARCH_PCALA* instead of R_LARCH_SOP_PUSH_PCREL.
Handle R_LARCH_B26 and R_LARCH_PCALA* in the module loader. For R_LARCH_
B26, also create a PLT entry as needed.
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
These relocation types are used by GNU binutils >= 2.40 and GCC >= 13.
Add their definitions so we will be able to use them in later patches.
Link: https://github.com/loongson/LoongArch-Documentation/pull/57
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
If explicit relocation hints are used by the toolchain, -Wa,-mla-*
options will be useless for the C code. So only use them for the
!CONFIG_AS_HAS_EXPLICIT_RELOCS case.
Replace "la" with "la.pcrel" in head.S to keep the semantic consistent
with new and old toolchains for the low level startup code.
For per-CPU variables, the "address" of the symbol is actually an offset
from $r21. The value is near the loading address of main kernel image,
but far from the loading address of modules. So we use model("extreme")
attibute to tell the compiler that a PC-relative addressing with 32-bit
offset is not sufficient for local per-CPU variables.
The behavior with different assemblers and compilers are summarized in
the following table:
AS has CC has
explicit relocs explicit relocs * Behavior
==============================================================
No No Use la.* macros.
No change from Linux 6.0.
--------------------------------------------------------------
No Yes Disable explicit relocs.
No change from Linux 6.0.
--------------------------------------------------------------
Yes No Not supported.
--------------------------------------------------------------
Yes Yes Enable explicit relocs.
No -Wa,-mla* options used.
==============================================================
*: We assume CC must have model attribute if it has explicit relocs.
Both features are added in GCC 13 development cycle, so any GCC
release >= 13 should be OK. Using early GCC 13 development snapshots
may produce modules with unsupported relocations.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=f09482a
Link: https://gcc.gnu.org/r13-1834
Link: https://gcc.gnu.org/r13-2199
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
GNU as >= 2.40 and GCC >= 13 will support using explicit relocation
hints in the assembly code, instead of la.* macros. The usage of
explicit relocation hints can improve code generation so it's enabled
by default by GCC >= 13.
Introduce a Kconfig option AS_HAS_EXPLICIT_RELOCS as the switch for
"use explicit relocation hints or not".
Tested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
There is a spelling mistake in a commented section. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit ac7c3e4ff4 ("compiler: enable CONFIG_OPTIMIZE_INLINING
forcibly") allows compiler to uninline functions marked as 'inline'.
In case of __xchg()/__cmpxchg() this would cause to reference
BUILD_BUG(), which is an error case for catching bugs and will not
happen for correct code, if __xchg()/__cmpxchg() is inlined.
This bug can be produced with CONFIG_DEBUG_SECTION_MISMATCH enabled,
and the solution is similar to below commits:
46f1619500 ("MIPS: include: Mark __xchg as __always_inline"),
88356d0990 ("MIPS: include: Mark __cmpxchg as __always_inline").
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Move local_flush_tlb_all() earlier (just after setup_ptwalker() and
before page allocation). This can avoid stale TLB entries misguiding
the later page allocation. Without this patch the second kernel of
kexec/kdump fails to boot SMP.
BTW, move output_pgtable_bits_defines() into tlb_init() since it has
nothing to do with tlb handler setup.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Now io master CPUs are not hotpluggable on LoongArch, but in the current
code only /sys/devices/system/cpu/cpu0/online is not created. Let us set
the hotpluggable field of all the io master CPUs as 0, then prevent to
create sysfs control file for all the io master CPUs which confuses some
user space tools. This is similar with commit 9cce844abf ("MIPS: CPU#0
is not hotpluggable").
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
