- Miscellaneous of_node_put() fixes
- Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock
- Convert gpio-clk-gate binding to YAML
- Various fixes to AMD/Xilinx Zynqmp clk driver
- Graduate AMD/Xilinx "clocking wizard" driver from staging
* clk-ofnode:
clk: ti: Balance of_node_get() calls for of_find_node_by_name()
clk: tegra20: Fix refcount leak in tegra20_clock_init
clk: tegra: Fix refcount leak in tegra114_clock_init
clk: tegra: Fix refcount leak in tegra210_clock_init
clk: sprd: Hold reference returned by of_get_parent()
clk: berlin: Add of_node_put() for of_get_parent()
clk: at91: dt-compat: Hold reference returned by of_get_parent()
clk: qoriq: Hold reference returned by of_get_parent()
clk: oxnas: Hold reference returned by of_get_parent()
clk: st: Hold reference returned by of_get_parent()
clk: tegra: Add missing of_node_put()
clk: meson: Hold reference returned by of_get_parent()
clk: nomadik: Add missing of_node_put()
* clk-bindings:
dt-bindings: clock: drop minItems equal to maxItems
dt-bindings: clock: gpio-gate-clock: Convert to json-schema
dt-bindings: clock: Move versaclock.h to dt-bindings/clock
dt-bindings: clock: Move lochnagar.h to dt-bindings/clock
* clk-cleanup:
clk: allow building lan966x as a module
clk: clk-xgene: simplify if-if to if-else
clk: nxp: fix typo in comment
clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
clkdev: Simplify devm_clk_hw_register_clkdev() function
clkdev: Remove never used devm_clk_release_clkdev()
clk: Remove never used devm_of_clk_del_provider()
clk: pistachio: Fix initconst confusion
clk: clk-npcm7xx: Remove unused struct npcm7xx_clk_gate_data and npcm7xx_clk_div_fixed_data
clk: do not initialize ret
clk: remove extra empty line
clk: Fix comment typo
clk: move from strlcpy with unused retval to strscpy
* clk-zynq:
clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate
clk: zynqmp: Check the return type zynqmp_pm_query_data
clk: zynqmp: Add a check for NULL pointer
clk: zynqmp: Replaced strncpy() with strscpy()
clk: zynqmp: Fix stack-out-of-bounds in strncpy`
clk: zynqmp: make bestdiv unsigned
* clk-xilinx:
clk: clocking-wizard: Depend on HAS_IOMEM
clk: clocking-wizard: Use dev_err_probe() helper
clk: clocking-wizard: Update the compatible
clk: clocking-wizard: Fix the reconfig for 5.2
clk: clocking-wizard: Rename nr-outputs to xlnx,nr-outputs
clk: clocking-wizard: Move clocking-wizard out
dt-bindings: add documentation of xilinx clocking wizard
Replace multiple log lines with a single log line at the end of
parsing HF-VSDB. Also use drm_dbg_kms instead of DRM_DBG_KMS, and
add log for DSC1.2 support.
v2: Fixed the formatting issues in the logging (Jani).
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-5-ankit.k.nautiyal@intel.com
DSC capabilities are given in bytes 11-13 of VSDB (i.e. bytes 8-10 of
SCDS). Since minimum length of Data block is 7, all bytes greater than 7
must be read only after checking the length of the data block.
This patch adds check for data block length before reading relavant DSC
bytes.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-4-ankit.k.nautiyal@intel.com
HF-VSDB/SCDB has bits to advertise support for 16, 12 and 10 bpc.
If none of the bits are set, the minimum bpc supported with DSC is 8.
This patch corrects the min bpc supported to be 8, instead of 0.
Fixes: 76ee7b9056 ("drm/edid: Parse DSC1.2 cap fields from HFVSDB block")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
v2: s/DSC1.2/DSC 1.2
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-2-ankit.k.nautiyal@intel.com
This PLL frequency needs a UL postfix to avoid compiler warnings on
32-bit architectures.
Fixes: 184fdd873d ("clk: qcom: Add global clock controller driver for SM6375")
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-----BEGIN PGP SIGNATURE-----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=RqjF
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The usual round of smaller fixes and cleanups all over the tree
* tag 'x86_cleanups_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Include the header of init_ia32_feat_ctl()'s prototype
x86/uaccess: Improve __try_cmpxchg64_user_asm() for x86_32
x86: Fix various duplicate-word comment typos
x86/boot: Remove superfluous type casting from arch/x86/boot/bitops.h
gcc_parent_data_15 and gcc_parent_map_15 are not used in this driver.
Remove them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20221003211438.25691-1-konrad.dybcio@somainline.org
Fixes: 184fdd873d ("clk: qcom: Add global clock controller driver for SM6375")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Sage's git tree has not been pushed to in years, and it was removed in
commit 3a5ccecd9a ("MAINTAINERS: remove myself as ceph co-maintainer"),
so it is better to remove it in the documentation too.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We should set the 'stat->size' to the real number of snapshots for
snapdirs.
Link: https://tracker.ceph.com/issues/57342
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When unlinking a file the kclient will send a unlink request to MDS
by holding the dentry reference, and then the MDS will return 2 replies,
which are unsafe reply and a deferred safe reply.
After the unsafe reply received the kernel will return and succeed
the unlink request to user space apps.
Only when the safe reply received the dentry's reference will be
released. Or the dentry will only be unhashed from dcache. But when
the open_by_handle_at() begins to open the unlinked files it will
succeed.
The inode->i_count couldn't be used to check whether the inode is
opened or not.
Link: https://tracker.ceph.com/issues/56524
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Tested-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When the client has enough caps to satisfy a setattr locally without
having to talk to the server, we currently do the setattr without
incrementing the change attribute.
Ensure that if the ctime changes locally, then the change attribute
does too.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Prefer using kcalloc(a, b) over kzalloc(a * b) as this improves
semantics since kcalloc is intended for allocating an array of memory.
Signed-off-by: Kenneth Lee <klee33@uw.edu>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For write when trying to get the Fwb caps we need to keep waiting
on transition from WRBUFFER|WR -> WR to avoid a new WR sync write
from going before a prior buffered writeback happens.
While for read there is no need to wait on transition from
RDCACHE|RD -> RD, and we can just exclude the revoking caps and
force to sync read.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Just fail the request instead sending the request out, or the peer
MDS will crash.
Link: https://tracker.ceph.com/issues/56529
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When new caps comes we need to wake up the waiters and also when
revoking the caps, there also could be new caps comes.
Link: https://tracker.ceph.com/issues/54044
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_msg_data_next is always passed a NULL pointer for this field. Some
of the "next" operations look at it in order to determine the length,
but we can just take the min of the data on the page or cursor->resid.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
code from the architectural one with the endgoal of plugging ARM's MPAM
implementation into it too so that the user interface remains the same
- Properly restore the MSR_MISC_FEATURE_CONTROL value instead of blindly
overwriting it to 0
-----BEGIN PGP SIGNATURE-----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=1iEb
-----END PGP SIGNATURE-----
Merge tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Borislav Petkov:
- More work by James Morse to disentangle the resctrl filesystem
generic code from the architectural one with the endgoal of plugging
ARM's MPAM implementation into it too so that the user interface
remains the same
- Properly restore the MSR_MISC_FEATURE_CONTROL value instead of
blindly overwriting it to 0
* tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes
x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's boot_cpu_data
x86/resctrl: Rename and change the units of resctrl_cqm_threshold
x86/resctrl: Move get_corrected_mbm_count() into resctrl_arch_rmid_read()
x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()
x86/resctrl: Pass the required parameters into resctrl_arch_rmid_read()
x86/resctrl: Abstract __rmid_read()
x86/resctrl: Allow per-rmid arch private storage to be reset
x86/resctrl: Add per-rmid arch private storage for overflow and chunks
x86/resctrl: Calculate bandwidth from the previous __mon_event_count() chunks
x86/resctrl: Allow update_mba_bw() to update controls directly
x86/resctrl: Remove architecture copy of mbps_val
x86/resctrl: Switch over to the resctrl mbps_val list
x86/resctrl: Create mba_sc configuration in the rdt_domain
x86/resctrl: Abstract and use supports_mba_mbps()
x86/resctrl: Remove set_mba_sc()s control array re-initialisation
x86/resctrl: Add domain offline callback for resctrl work
x86/resctrl: Group struct rdt_hw_domain cleanup
x86/resctrl: Add domain online callback for resctrl work
x86/resctrl: Merge mon_capable and mon_enabled
...
- By popular demand, print the previous microcode revision an update
was done over
- Remove more code related to the now gone MICROCODE_OLD_INTERFACE
- Document the problems stemming from microcode late loading
-----BEGIN PGP SIGNATURE-----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=lWDD
-----END PGP SIGNATURE-----
Merge tag 'x86_microcode_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x75 microcode loader updates from Borislav Petkov:
- Get rid of a single ksize() usage
- By popular demand, print the previous microcode revision an update
was done over
- Remove more code related to the now gone MICROCODE_OLD_INTERFACE
- Document the problems stemming from microcode late loading
* tag 'x86_microcode_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Track patch allocation size explicitly
x86/microcode: Print previous version of microcode after reload
x86/microcode: Remove ->request_microcode_user()
x86/microcode: Document the whole late loading problem
code can do proper arithmetic with their addresses
-----BEGIN PGP SIGNATURE-----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=ibJy
-----END PGP SIGNATURE-----
Merge tag 'x86_paravirt_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt fix from Borislav Petkov:
- Ensure paravirt patching site descriptors are aligned properly so
that code can do proper arithmetic with their addresses
* tag 'x86_paravirt_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/paravirt: Ensure proper alignment
- Correct APM entry's Konfig help text
-----BEGIN PGP SIGNATURE-----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=cNp0
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Borislav Petkov:
- Drop misleading "RIP" from the opcodes dumping message
- Correct APM entry's Konfig help text
* tag 'x86_misc_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/dumpstack: Don't mention RIP in "Code: "
x86/Kconfig: Specify idle=poll instead of no-hlt
kernel's optimized ffs()/ffz() helpers in order to make use of the
compiler's constant folding optmization passes.
-----BEGIN PGP SIGNATURE-----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=Reul
-----END PGP SIGNATURE-----
Merge tag 'x86_asm_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm update from Borislav Petkov:
- Use the __builtin_ffs/ctzl() compiler builtins for the constant
argument case in the kernel's optimized ffs()/ffz() helpers in order
to make use of the compiler's constant folding optmization passes.
* tag 'x86_asm_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/bitops: Use __builtin_ctzl() to evaluate constant expressions
x86/asm/bitops: Use __builtin_ffs() to evaluate constant expressions
as both vendors suggest
- Clean up pciserial a bit
-----BEGIN PGP SIGNATURE-----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=Ggh3
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core fixes from Borislav Petkov:
- Make sure an INT3 is slapped after every unconditional retpoline JMP
as both vendors suggest
- Clean up pciserial a bit
* tag 'x86_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86,retpoline: Be sure to emit INT3 after JMP *%\reg
x86/earlyprintk: Clean up pciserial
Intel hardware allows some preemption settings to be controlled either
by the kernel-mode driver exclusively, or placed under control of the
user-mode drivers; on Linux we always select the userspace control
option. The various registers involved in this are not documented very
clearly; let's add some clarifying comments to help explain how this all
works and provide some history on why our Linux drivers take the
approach they do (which I believe differs from the path taken by certain
other operating systems' drivers).
While we're at it, let's also remove the graphics version 12 upper bound
on this programming. As described, we don't have any plans to move away
from UMD control of preemption settings on future platforms, and there's
currently no reason to believe that the hardware will fundamentally
change how these registers and settings work after version 12.
Bspec: 45921, 45858, 45863
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Wayne Boyer <wayne.boyer@intel.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907212410.22623-1-matthew.d.roper@intel.com
-----BEGIN PGP SIGNATURE-----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=e8H8
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC update from Borislav Petkov:
- Add support for locking the APIC in X2APIC mode to prevent SGX
enclave leaks
* tag 'x86_apic_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Don't disable x2APIC if locked
granularity of the memory error instead of hard-coding it
- Offline memory pages on Intel machines after 2 errors reported per page
-----BEGIN PGP SIGNATURE-----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=5tV9
-----END PGP SIGNATURE-----
Merge tag 'ras_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Fix the APEI MCE callback handler to consult the hardware about the
granularity of the memory error instead of hard-coding it
- Offline memory pages on Intel machines after 2 errors reported per
page
* tag 'ras_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Retrieve poison range from hardware
RAS/CEC: Reduce offline page threshold for Intel systems
always accurate (preemption is enabled at that time) but the print string
contains "likely" and after a lot of back'n'forth on this, this was the
consensus that was reached. See thread starting at:
https://lore.kernel.org/r/5d62c1d0-7425-d5bb-ecb5-1dc3b4d7d245@intel.com
- After a *lot* of testing and polishing, finally the clear_user()
improvements to inline REP; STOSB by default
-----BEGIN PGP SIGNATURE-----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=xLSS
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Print the CPU number at segfault time.
The number printed is not always accurate (preemption is enabled at
that time) but the print string contains "likely" and after a lot of
back'n'forth on this, this was the consensus that was reached. See
thread at [1].
- After a *lot* of testing and polishing, finally the clear_user()
improvements to inline REP; STOSB by default
Link: https://lore.kernel.org/r/5d62c1d0-7425-d5bb-ecb5-1dc3b4d7d245@intel.com [1]
* tag 'x86_cpu_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Print likely CPU at segfault time
x86/clear_user: Make it faster
using the respective functionality from the RTC library
-----BEGIN PGP SIGNATURE-----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=9t5p
-----END PGP SIGNATURE-----
Merge tag 'x86_timers_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RTC cleanups from Borislav Petkov:
- Cleanup x86/rtc.c and delete duplicated functionality in favor of
using the respective functionality from the RTC library
* tag 'x86_timers_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/rtc: Rename mach_set_rtc_mmss() to mach_set_cmos_time()
x86/rtc: Rewrite & simplify mach_get_cmos_time() by deleting duplicated functionality
is running as a guest on the ACRN hypervisor
-----BEGIN PGP SIGNATURE-----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=Ds89
-----END PGP SIGNATURE-----
Merge tag 'x86_platform_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform update from Borislav Petkov:
"A single x86/platform improvement when the kernel is running as an
ACRN guest:
- Get TSC and CPU frequency from CPUID leaf 0x40000010 when the
kernel is running as a guest on the ACRN hypervisor"
* tag 'x86_platform_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acrn: Set up timekeeping
- Improve error decoding speed of the Intel drivers by avoiding the ACPI facilities
but doing decoding in the driver itself
- Other misc improvements to the Intel drivers
- The usual cleanups and fixlets all over EDAC land
-----BEGIN PGP SIGNATURE-----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=Gh9S
-----END PGP SIGNATURE-----
Merge tag 'edac_updates_for_v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add support for Skylake-S CPUs to ie31200_edac
- Improve error decoding speed of the Intel drivers by avoiding the
ACPI facilities but doing decoding in the driver itself
- Other misc improvements to the Intel drivers
- The usual cleanups and fixlets all over EDAC land
* tag 'edac_updates_for_v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/i7300: Correct the i7300_exit() function name in comment
x86/sb_edac: Add row column translation for Broadwell
EDAC/i10nm: Print an extra register set of retry_rd_err_log
EDAC/i10nm: Retrieve and print retry_rd_err_log registers for HBM
EDAC/skx_common: Add ChipSelect ADXL component
EDAC/ppc_4xx: Reorder symbols to get rid of a few forward declarations
EDAC: Remove obsolete declarations in edac_module.h
EDAC/i10nm: Add driver decoder for Ice Lake and Tremont CPUs
EDAC/skx_common: Make output format similar
EDAC/skx_common: Use driver decoder first
EDAC/mc: Drop duplicated dimm->nr_pages debug printout
EDAC/mc: Replace spaces with tabs in memtype flags definition
EDAC/wq: Remove unneeded flush_workqueue()
EDAC/ie31200: Add Skylake-S support
An HVM guest with linux stubdomain and 2 PCI devices failed to start as
libxl timed out waiting for the PCI devices to be added. It happens
intermittently but with some regularity. libxl wrote the two xenstore
entries for the devices, but then timed out waiting for backend state 4
(Connected) - the state stayed at 7 (Reconfiguring). (PCI passthrough
to an HVM with stubdomain is PV passthrough to the stubdomain and then
HVM passthrough with the QEMU inside the stubdomain.)
The stubdomain kernel never printed "pcifront pci-0: Installing PCI
frontend", so it seems to have missed state 4 which would have
called pcifront_try_connect() -> pcifront_connect_and_init_dma()
Have pcifront_detach_devices() special-case state Initialised and call
pcifront_connect_and_init_dma(). Don't use pcifront_try_connect()
because that sets the xenbus state which may throw off the backend.
After connecting, skip the remainder of detach_devices since none have
been initialized yet. When the backend switches to Reconfigured,
pcifront_attach_devices() will pick them up again.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220829151536.8578-1-jandryuk@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
device in the driver and remove the dedicated OF function (Daniel
Lezcano)
- Fixed Kconfig dependency for the QCom tsens driver (Jonathan
Cameron)
- Fixed missing const annotation for the RCar ops driver and removed a
duplicate parameter check (Lad Prabhakar)
- Fixed a NULL pointer dereference when calling set_trip_temp() (Lad
Prabhakar)
- Fixed the fourth hardware id in the QCom tsens driver (Vincent
Knecht)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmM7/JIACgkQqDIjiipP
6E/Emwf9GCy6aJHBzvU1cKkrHr6ShuTRG1nkdhuHpzt/oDZ5kRYIL7vZKbRAQ7N3
YjKEi0F6x0V5CeCkHybMDHN8VvIVJEyhASUvWoV4eqYqlavaXVrT7/QQGnkCMrm/
QYrkEbnxUyAt97tp+D7FD7vDOu2D6YCyb6kQWbnPMfEQolQcGx6vAuUmHW5RHrrD
FoaP+XQHe5cuKG1h38TKxOx2q1ROeJqWlOX+3Aqw+Py9/QTrFfWni2i8+hs5BS9y
5hX85RoHyuUW5PDG5aoSejQ2U1dZkxilB8ywAoMHGApUX2UyGp97wTUtLoMffdy+
47+GqKUrt6w/ph9Z+7ZWvG+M9/Z0mw==
=Tqak
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.1-rc1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control fixes for 6.1-rc1 from Daniel Lezcano:
"- Used the platform data to get the sensor id instead of parsing the
device in the driver and remove the dedicated OF function (Daniel
Lezcano)
- Fixed Kconfig dependency for the QCom tsens driver (Jonathan Cameron)
- Fixed missing const annotation for the RCar ops driver and removed a
duplicate parameter check (Lad Prabhakar)
- Fixed a NULL pointer dereference when calling set_trip_temp() (Lad
Prabhakar)
- Fixed the fourth hardware id in the QCom tsens driver (Vincent
Knecht)"
* tag 'thermal-v6.1-rc1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id
thermal/core: Add a check before calling set_trip_temp()
thermal/core: Drop valid pointer check for type
thermal/drivers/rcar_thermal: Constify static thermal_zone_device_ops
thermal/drivers/qcom: Drop false build dependency of all QCOM drivers on QCOM_TSENS
thermal/of: Remove the thermal_zone_of_get_sensor_id() function
thermal/drivers/imx_sc: Rely on the platform data to get the resource id
Always-on PM domains must be on during initialisation or the domain is
currently silently rejected.
Print an error message in case an always-on domain is not on to make it
easier to debug drivers getting this wrong (e.g. by setting an always-on
genpd flag without making sure that the state matches).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If CONFIG_IO_URING is not set:
include/linux/io_uring.h:65:12: error: ‘io_uring_cmd_import_fixed’ defined but not used [-Werror=unused-function]
65 | static int io_uring_cmd_import_fixed(u64 ubuf, unsigned long len, int rw,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by adding the missing "inline" keyword.
Fixes: a9216fac3e ("io_uring: add io_uring_cmd_import_fixed")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7404b4a696f64e33e5ef3c5bd3754d4f26d13e50.1664887093.git.geert+renesas@glider.be
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The for_each_acpi_consumer_dev() takes a reference to the iterator
and if we break a loop we must drop that reference. This usually
happens when error handling is involved. However it's not the case
for skl_int3472_fill_clk_pdata().
Don't leak reference on error by dropping it properly.
Fixes: 43cf36974d ("platform/x86: int3472: Support multiple clock consumers")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If an error is detected as a result of user-space process accessing a
corrupt memory location, the CPU may take an abort. Then the platform
firmware reports kernel via NMI like notifications, e.g. NOTIFY_SEA,
NOTIFY_SOFTWARE_DELEGATED, etc.
For NMI like notifications, commit 7f17b4a121 ("ACPI: APEI: Kick the
memory_failure() queue for synchronous errors") keep track of whether
memory_failure() work was queued, and make task_work pending to flush out
the queue so that the work is processed before return to user-space.
The code use init_mm to check whether the error occurs in user space:
if (current->mm != &init_mm)
The condition is always true, becase _nobody_ ever has "init_mm" as a real
VM any more.
In addition to abort, errors can also be signaled as asynchronous
exceptions, such as interrupt and SError. In such case, the interrupted
current process could be any kind of thread. When a kernel thread is
interrupted, the work ghes_kick_task_work deferred to task_work will never
be processed because entry_handler returns to call ret_to_kernel() instead
of ret_to_user(). Consequently, the estatus_node alloced from
ghes_estatus_pool in ghes_in_nmi_queue_one_entry() will not be freed.
After around 200 allocations in our platform, the ghes_estatus_pool will
run of memory and ghes_in_nmi_queue_one_entry() returns ENOMEM. As a
result, the event failed to be processed.
sdei: event 805 on CPU 113 failed with error: -2
Finally, a lot of unhandled events may cause platform firmware to exceed
some threshold and reboot.
The condition should generally just do
if (current->mm)
as described in active_mm.rst documentation.
Then if an asynchronous error is detected when a kernel thread is running,
(e.g. when detected by a background scrubber), do not add task_work to it
as the original patch intends to do.
Fixes: 7f17b4a121 ("ACPI: APEI: Kick the memory_failure() queue for synchronous errors")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit d60cd06331 ("PM: ACPI: reboot: Use S5 for reboot") caused Dell
PowerEdge r440 hangs at reboot.
The issue is fixed by commit 2ca1c94ce0 ("tg3: Disable tg3 device on
system reboot to avoid triggering AER"), so use the new sysoff API to
reinstate S5 for reboot on ACPI-based systems.
Using S5 for reboot is default behavior under Windows: "A full shutdown
(S5) occurs when a system restart is requested" [1].
Link: https://docs.microsoft.com/en-us/windows/win32/power/system-power-state # [1]
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add SYS_OFF_MODE_RESTART_PREPARE callbacks to be invoked before
a system restart.
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change adds support for ACPI devices that use ExclusiveAndWake or
SharedAndWake in their _CRS GpioInt definition (instead of using _PRW),
and also provide power resources. Previously the ACPI subsystem had no
idea if the device had a wake capable interrupt armed. This resulted
in the ACPI device PM system placing the device into D3Cold, and thus
cutting power to the device. With this change we will now query the
_S0W method to figure out the appropriate wake capable D-state.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Device tree already has a mechanism to pass the wake_irq. It does this
by looking for the wakeup-source property and setting the
I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the
ACPI interrupt wake flag to determine if the interrupt can be used to
wake the system. Previously the i2c drivers had to make assumptions and
blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
If there is a device with an Active Low interrupt and the device gets
powered off while suspending, the interrupt line will go low since it's
no longer powered and wakes the system. For this reason we should
respect the board designers wishes and honor the wake bit defined on the
interrupt.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI IRQ/Interrupt resources contain a bit that describes if the
interrupt should wake the system. This change exposes that bit via
a new IORESOURCE_IRQ_WAKECAPABLE flag. Drivers should check this flag
before arming an IRQ to wake the system.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI spec defines the SharedAndWake and ExclusiveAndWake share type
keywords. This is an indication that the GPIO IRQ can also be used as a
wake source. This change exposes the wake_capable bit so drivers can
correctly enable wake functionality instead of making an assumption.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It looks like we need this for local-memory, if we want to use ptrace.
Something more is still needed if we want to handle non-mappable memory,
which looks quite annoying.
v2:
- ttm_bo_kmap doesn't seem to work well here, and seems to expect
contiguous resource.
v3(Andi):
- s/PAGE_SIZE/bytes/ when passing in the size of the mapping.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6989
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003172819.99245-1-matthew.auld@intel.com
