The GSC will perform both the load and the authentication, so we just
need to check the auth bit after the GSC has replied.
Since we require the PXP module to load the HuC, the earliest we can
trigger the load is during the pxp_bind operation.
Note that GSC-loaded HuC survives GT reset, so we need to just mark it
as ready when we re-init the GT HW.
V2: move setting of HuC fw error state to the failure path of the HuC
auth function, so it covers both the legacy and new auth flows
V4:
1. Fix typo in the commit message
2. style fix in intel_huc_wait_for_auth_complete()
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-11-daniele.ceraolospurio@intel.com
Add support for loading HuC via a pxp stream command.
V4:
1. Remove unnecessary include in intel_pxp_huc.h (Jani)
2. Adjust copyright year to 2022
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-10-daniele.ceraolospurio@intel.com
Command to be sent via the stream interface are written to a local
memory page, whose address is then provided to the GSC.
The interface supports providing a full sg with multiple pages for both
input and output messages, but since for now we only aim to support short
and synchronous messages we can use a single page for both input and
output.
Note that the mei interface expects an sg of 4k pages, while our lmem pages
are 64k. If we ever need to support more than 4k we'll need to convert.
Added a TODO comment to the code to record this.
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-9-daniele.ceraolospurio@intel.com
The mei_pxp module is required to send the command to load authenticate
the HuC to the GSC even if pxp is not in use for protected content
management.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-8-daniele.ceraolospurio@intel.com
With on-boards graphics card, both i915 and MEI
are in the same device hierarchy with the same parent,
while for discrete gfx card the MEI is its child device.
Adjust the match function for that scenario
by matching MEI parent device with i915.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-7-daniele.ceraolospurio@intel.com
The discrete graphics card with GSC firmware
using command streamer API hence it requires to enhance
pxp module with the new gsc_command() handler.
The handler is implemented via mei_pxp_gsc_command() which is
just a thin wrapper around mei_cldev_send_gsc_command()
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-6-daniele.ceraolospurio@intel.com
Add mei bus API for sending gsc commands: mei_cldev_send_gsc_command()
The GSC commands are originated in the graphics stack
and are in form of SGL DMA buffers.
The GSC commands are synchronous, the response is received
in the same call on the out sg list buffers.
The function setups pointers for in and out sg lists in the
mei sgl extended header and sends it to the firmware.
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-5-daniele.ceraolospurio@intel.com
GSC command is and extended header containing a scatter gather
list and without a data buffer. Using MEI_CL_IO_SGL flag,
the caller send the GSC command as a data and the function internally
moves it to the extended header.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-3-daniele.ceraolospurio@intel.com
GSC extend header is of variable size and data
is provided in a sgl list inside the header
and not in the data buffers, need to enable the path.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Vitaly Lubart <vitaly.lubart@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-2-daniele.ceraolospurio@intel.com
Merge cpuidle changes, PM core changes and power capping changes for
6.1-rc1:
- Add AlderLake-N support to intel_idle (Zhang Rui).
- Replace strlcpy() with unused retval with strscpy() in intel_idle
(Wolfram Sang).
- Remove redundant check from cpuidle_switch_governor() (Yu Liao).
- Replace strlcpy() with unused retval with strscpy() in the powernv
cpuidle driver (Wolfram Sang).
- Drop duplicate word from a comment in the coupled cpuidle driver
(Jason Wang).
- Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
in the flags and the device is about to resume (Rafael Wysocki).
- Add extra debugging statement for multiple active IRQs to system
wakeup handling code (Mario Limonciello).
- Replace strlcpy() with unused retval with strscpy() in the core
system suspend support code (Wolfram Sang).
- Update the intel_rapl power capping driver:
* Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
* Add support for RAPTORLAKE_S (Zhang Rui).
* Fix UBSAN shift-out-of-bounds issue (Chao Qin).
* pm-cpuidle:
intel_idle: Add AlderLake-N support
cpuidle: Remove redundant check in cpuidle_switch_governor()
intel_idle: move from strlcpy() with unused retval to strscpy()
cpuidle: powernv: move from strlcpy() with unused retval to strscpy()
cpuidle: coupled: Drop duplicate word from a comment
* pm-core:
PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case
* pm-sleep:
PM: wakeup: Add extra debugging statement for multiple active IRQs
PM: suspend: move from strlcpy() with unused retval to strscpy()
* powercap:
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
powercap: intel_rapl: Add support for RAPTORLAKE_S
Merge cpufreq changes for 6.1-rc1:
- Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug
Smythies).
- Update the AMD P-state driver (Perry Yuan):
* Fix wrong lowest perf fetch.
* Map desired perf into pstate scope for powersave governor.
* Update pstate frequency transition delay time.
* Fix initial highest_perf value.
* Clean up.
- Move max CPU capacity to sugov_policy in the schedutil cpufreq
governor (Lukasz Luba).
- Add SM6115 to cpufreq-dt blocklist (Adam Skladowski).
- Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen,
and Yang Yingliang).
- Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan,
and Viresh Kumar).
- Minor cleanups around functions called at module_init() (Xiu Jianfeng).
- Use module_init and add module_exit for bmips driver (Zhang Jianhua).
* pm-cpufreq:
cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh
cpufreq: Add __init annotation to module init funcs
cpufreq: tegra194: change tegra239_cpufreq_soc to static
cpufreq: tegra194: Add support for Tegra239
cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning
cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode
cpufreq: amd-pstate: Fix initial highest_perf value
cpufreq: tegra194: Remove the unneeded result variable
cpufreq: amd-pstate: update pstate frequency transition delay time
cpufreq: amd_pstate: map desired perf into pstate scope for powersave governor
cpufreq: amd_pstate: fix wrong lowest perf fetch
cpufreq: amd-pstate: fix white-space
cpufreq: amd-pstate: simplify cpudata pointer assignment
cpufreq: bmips-cpufreq: Use module_init and add module_exit
cpufreq: schedutil: Move max CPU capacity to sugov_policy
cpufreq: Add SM6115 to cpufreq-dt-platdev blocklist
Merge ACPI _UID handling unification changes for 6.1-rc1:
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into an
integer value (Andy Shevchenko).
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko).
* acpi-uid:
efi/dev-path-parser: Refactor _UID handling to use acpi_dev_uid_to_integer()
spi: pxa2xx: Refactor _UID handling to use acpi_dev_uid_to_integer()
perf: qcom_l2_pmu: Refactor _UID handling to use acpi_dev_uid_to_integer()
i2c: mlxbf: Refactor _UID handling to use acpi_dev_uid_to_integer()
i2c: amd-mp2-plat: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: x86: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: LPSS: Refactor _UID handling to use acpi_dev_uid_to_integer()
ACPI: utils: Add acpi_dev_uid_to_integer() helper to get _UID as integer
Merge miscellaneous ACPI material, ACPI tools changes and ACPI
documentation updates for 6.1-rc1:
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki).
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang).
- Do not initialize ret in main() in the pfrut utility (Shi junming).
- Drop useless ACPI DSDT override documentation (Rafael Wysocki).
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare).
* acpi-misc:
MAINTAINERS: Drop records pointing to 01.org/linux-acpi
ACPI: Kconfig: Drop link to https://01.org/linux-acpi
ACPI: DPTF: Drop stale link from Kconfig help
ACPI: move from strlcpy() with unused retval to strscpy()
* acpi-tools:
ACPI: tools: pfrut: Do not initialize ret in main()
* acpi-docs:
ACPI: docs: Drop useless DSDT override documentation
ACPI: docs: enumeration: Fix a few typos and wording mistakes
Merge EC, AC, fan and backlight driver changes and ACPI AMBA support
update for 6.1-rc1:
- Drop unneeded result variable from ec_write() (ye xingchen).
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver (Hanjun
Guo).
- Reorder symbols to get rid of a few forward declarations in the ACPI
fan driver (Uwe Kleine-König).
- Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid
Norlander).
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam).
* acpi-ec:
ACPI: EC: Drop unneeded result variable from ec_write()
* acpi-ac:
ACPI: AC: Remove the leftover struct acpi_ac_bl
* acpi-fan:
ACPI: fan: Reorder symbols to get rid of a few forward declarations
* acpi-video:
ACPI: video: Add Toshiba Satellite/Portege Z830 quirk
* acpi-amba:
ACPI: AMBA: Add ARM DMA-330 controller to the supported list
Merge new material related to CPPC, PCC, APEI and OSI strings handling
for 6.1-rc1:
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton).
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan).
- Fix Tx acknowledge in the PCC address space handler (Huisong Li).
- Use wait_for_completion_timeout() for PCC mailbox operations (Huisong
Li).
- Release resources on PCC address space setup failure path (Rafael
Mendonca).
- Remove unneeded result variables from APEI code (ye xingchen).
- Print total number of records found during BERT log parsing (Dmitry
Monakhov).
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello).
* acpi-cppc:
ACPI: CPPC: Disable FIE if registers in PCC regions
ACPI: CPPC: Add ACPI disabled check to acpi_cpc_valid()
* acpi-pcc:
ACPI: PCC: Fix Tx acknowledge in the PCC address space handler
ACPI: PCC: replace wait_for_completion()
ACPI: PCC: Release resources on address space setup failure path
* acpi-apei:
ACPI: APEI: Remove unneeded result variables
ACPI: APEI: Add BERT error log footer
* acpi-osi:
ACPI: OSI: Update Documentation on custom _OSI strings
ACPI: OSI: Remove Linux-HPI-Hybrid-Graphics _OSI string
ACPI: OSI: Remove Linux-Lenovo-NV-HDMI-Audio _OSI string
ACPI: OSI: Remove Linux-Dell-Video _OSI string
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by calling
pm_runtime_disable when error returns.
Fixes:93e8791dd34ca ("ASoC: wm5102: Initial driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220929150653.63845-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by calling
pm_runtime_enable when error returns.
Fixes:5c6af635fd772 ("ASoC: wm5110: Add audio CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220929150653.63845-3-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by calling
pm_runtime_disable when error returns.
Fixes:40843aea5a9bd ("ASoC: wm8997: Initial CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220929150653.63845-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to enable namespaces or any sort of isolation within
user_events the register lock and pages need to be broken up into
groups. Each event and file now has a group pointer which stores the
actual pages to map, lookup data and synchronization objects.
This only enables a single group that maps to init_user_ns, as IMA
namespace has done. This enables user_events to start the work of
supporting namespaces by walking the namespaces up to the init_user_ns.
Future patches will address other user namespaces and will align to the
approaches the IMA namespace uses.
Link: https://lore.kernel.org/linux-kernel/20220915193221.1728029-15-stefanb@linux.ibm.com/#t
Link: https://lkml.kernel.org/r/20221001001016.2832-2-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
but a few significant changes even so:
- A complete rewriting of the top-level index.rst file, which mostly
reflects itself in a redone top page in the HTML-rendered docs. The hope
is that the new organization will be a friendlier starting point for
both users and developers.
- Some math-rendering improvements.
- A coding-style.rst update on the use of BUG() and WARN()
- A big maintainer-PHP guide update.
- Some code-of-conduct updates
- More Chinese translation work
Plus the usual pile of typo fixes, corrections, and updates.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmM7BksPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y8i4H/ihd1ppgVYy1yvFL3L1KkcsNyt3bFUa6hide
qmkhqpzjsNmbTOaW19Y6epCzRzvxG7M9hzztIewt1BhRDvgRC8GaQNNRw/IBs0B6
kprisINC2/ap4JjCroYWepfd+H8NSiVxqtd8hVSMWDSh2cK9vw0qVqQq59I+gght
64pA4F2nPO6bamZzAELTdWRj0ITL1A/V/jYj+T074B094arc4HyekIQ5Jn9GTCmt
jFBH9yxAb3l8K7KgzH7FgxKY/an0HxKDh4Cnx2Jv+dcocgCwy1iXCuyEZbFd9GEB
UyhPcCyrIe/I2B9U9LrqLvXA8LW7jwE+MZMqZpaRkxcIdE2gEFQ=
=M7tR
-----END PGP SIGNATURE-----
Merge tag 'docs-6.1' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"There's not a huge amount of activity in the docs tree this time
around, but a few significant changes even so:
- A complete rewriting of the top-level index.rst file, which mostly
reflects itself in a redone top page in the HTML-rendered docs. The
hope is that the new organization will be a friendlier starting
point for both users and developers.
- Some math-rendering improvements.
- A coding-style.rst update on the use of BUG() and WARN()
- A big maintainer-PHP guide update.
- Some code-of-conduct updates
- More Chinese translation work
Plus the usual pile of typo fixes, corrections, and updates"
* tag 'docs-6.1' of git://git.lwn.net/linux: (66 commits)
checkpatch: warn on usage of VM_BUG_ON() and other BUG variants
coding-style.rst: document BUG() and WARN() rules ("do not crash the kernel")
Documentation: devres: add missing IO helper
Documentation: devres: update IRQ helper
Documentation/mm: modify page_referenced to folio_referenced
Documentation/CoC: Reflect current CoC interpretation and practices
docs/doc-guide: Add documentation on SPHINX_IMGMATH
docs: process/5.Posting.rst: clarify use of Reported-by: tag
docs, kprobes: Fix the wrong location of Kprobes
docs: add a man-pages link to the front page
docs: put atomic*.txt and memory-barriers.txt into the core-api book
docs: move asm-annotations.rst into core-api
docs: remove some index.rst cruft
docs: reconfigure the HTML left column
docs: Rewrite the front page
docs: promote the title of process/index.rst
Documentation: devres: add missing SPI helper
Documentation: devres: add missing PINCTRL helpers
docs: hugetlbpage.rst: fix a typo of hugepage size
docs/zh_CN: Add new translation of admin-guide/bootconfig.rst
...
This pull request contains the following branches:
doc.2022.08.31b: Documentation updates. This is the first in a series
from an ongoing review of the RCU documentation. "Why are people
thinking -that- about RCU? Oh. Because that is an entirely
reasonable interpretation of its documentation."
fixes.2022.08.31b: Miscellaneous fixes.
kvfree.2022.08.31b: Improved memory allocation and heuristics.
nocb.2022.09.01a: Improve rcu_nocbs diagnostic output.
poll.2022.08.31b: Add full-sized polled RCU grace period state values.
These are the same size as an rcu_head structure, which is double
that of the traditional unsigned long state values that may still
be obtained from et_state_synchronize_rcu(). The added size
avoids missing overlapping grace periods. This benefit is that
call_rcu() can be replaced by polling, which can be attractive
in situations where RCU-protected data is aged out of memory.
Early in the series, the size of this state value is three
unsigned longs. Later in the series, the synchronize_rcu() and
synchronize_rcu_expedited() fastpaths are reworked to permit
the full state to be represented by only two unsigned longs.
This reworking slows these two functions down in SMP kernels
running either on single-CPU systems or on systems with all but
one CPU offlined, but this should not be a significant problem.
And if it somehow becomes a problem in some yet-as-unforeseen
situations, three-value state values can be provided for only
those situations.
Finally, a pair of functions named same_state_synchronize_rcu()
and same_state_synchronize_rcu_full() allow grace-period state
values to be compared for equality. This permits users to
maintain lists of data structures having the same state value,
removing the need for per-data-structure grace-period state
values, thus decreasing memory footprint.
poll-srcu.2022.08.31b: Polled SRCU grace-period updates, including
adding tests to rcutorture and reducing the incidence of Tiny
SRCU grace-period-state counter wrap.
tasks.2022.08.31b: Improve Tasks RCU diagnostics and quiescent-state
detection.
-----BEGIN PGP SIGNATURE-----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=AZPZ
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates.
This is the first in a series from an ongoing review of the RCU
documentation. "Why are people thinking -that- about RCU? Oh. Because
that is an entirely reasonable interpretation of its documentation."
- Miscellaneous fixes.
- Improved memory allocation and heuristics.
- Improve rcu_nocbs diagnostic output.
- Add full-sized polled RCU grace period state values.
These are the same size as an rcu_head structure, which is double
that of the traditional unsigned long state values that may still be
obtained from et_state_synchronize_rcu(). The added size avoids
missing overlapping grace periods. This benefit is that call_rcu()
can be replaced by polling, which can be attractive in situations
where RCU-protected data is aged out of memory.
Early in the series, the size of this state value is three unsigned
longs. Later in the series, the fastpaths in synchronize_rcu() and
synchronize_rcu_expedited() are reworked to permit the full state to
be represented by only two unsigned longs. This reworking slows these
two functions down in SMP kernels running either on single-CPU
systems or on systems with all but one CPU offlined, but this should
not be a significant problem. And if it somehow becomes a problem in
some yet-as-unforeseen situations, three-value state values can be
provided for only those situations.
Finally, a pair of functions named same_state_synchronize_rcu() and
same_state_synchronize_rcu_full() allow grace-period state values to
be compared for equality. This permits users to maintain lists of
data structures having the same state value, removing the need for
per-data-structure grace-period state values, thus decreasing memory
footprint.
- Polled SRCU grace-period updates, including adding tests to
rcutorture and reducing the incidence of Tiny SRCU grace-period-state
counter wrap.
- Improve Tasks RCU diagnostics and quiescent-state detection.
* tag 'rcu.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (55 commits)
rcutorture: Use the barrier operation specified by cur_ops
rcu-tasks: Make RCU Tasks Trace check for userspace execution
rcu-tasks: Ensure RCU Tasks Trace loops have quiescent states
rcu-tasks: Convert RCU_LOCKDEP_WARN() to WARN_ONCE()
srcu: Make Tiny SRCU use full-sized grace-period counters
srcu: Make Tiny SRCU poll_state_synchronize_srcu() more precise
srcu: Add GP and maximum requested GP to Tiny SRCU rcutorture output
rcutorture: Make "srcud" option also test polled grace-period API
rcutorture: Limit read-side polling-API testing
rcu: Add functions to compare grace-period state values
rcutorture: Expand rcu_torture_write_types() first "if" statement
rcutorture: Use 1-suffixed variable in rcu_torture_write_types() check
rcu: Make synchronize_rcu() fastpath update only boot-CPU counters
rcutorture: Adjust rcu_poll_need_2gp() for rcu_gp_oldstate field removal
rcu: Remove ->rgos_polled field from rcu_gp_oldstate structure
rcu: Make synchronize_rcu_expedited() fast path update .expedited_sequence
rcu: Remove expedited grace-period fast-path forward-progress helper
rcu: Make synchronize_rcu() fast path update ->gp_seq counters
rcu-tasks: Remove grace-period fast-path rcu-tasks helper
rcu: Set rcu_data structures' initial ->gpwrap value to true
...
Changed .iterate to .iterate_shared in orangefs_dir_operations. I
didn't change anything else, there were no xfstests regressions
and no problem with any of my other tests...
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
This pull request provides nolibc updates, most notably greatly improved
testing. These tests are located in tools/testing/selftests/nolibc. The
output of "make help" is as follows:
Supported targets under selftests/nolibc:
all call the "run" target below
help this help
sysroot create the nolibc sysroot here (uses $ARCH)
nolibc-test build the executable (uses $CC and $CROSS_COMPILE)
initramfs prepare the initramfs with nolibc-test
defconfig create a fresh new default config (uses $ARCH)
kernel (re)build the kernel with the initramfs (uses $ARCH)
run runs the kernel in QEMU after building it (uses $ARCH, $TEST)
rerun runs a previously prebuilt kernel in QEMU (uses $ARCH, $TEST)
clean clean the sysroot, initramfs, build and output files
The output file is "run.out". Test ranges may be passed using $TEST.
Currently using the following variables:
ARCH = x86
CROSS_COMPILE =
CC = gcc
OUTPUT = /home/git/linux-rcu/tools/testing/selftests/nolibc/
TEST =
QEMU_ARCH = x86_64 [determined from $ARCH]
IMAGE_NAME = bzImage [determined from $ARCH]
The output of a successful x86 "make run" is currently as follows,
with kernel build output omitted:
$ make run
71 test(s) passed.
$
-----BEGIN PGP SIGNATURE-----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=wqBE
-----END PGP SIGNATURE-----
Merge tag 'nolibc.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
"Most notably greatly improved testing. These tests are located in
tools/testing/selftests/nolibc. The output of "make help" is as
follows:
Supported targets under selftests/nolibc:
all call the "run" target below
help this help
sysroot create the nolibc sysroot here (uses $ARCH)
nolibc-test build the executable (uses $CC and $CROSS_COMPILE)
initramfs prepare the initramfs with nolibc-test
defconfig create a fresh new default config (uses $ARCH)
kernel (re)build the kernel with the initramfs (uses $ARCH)
run runs the kernel in QEMU after building it (uses $ARCH, $TEST)
rerun runs a previously prebuilt kernel in QEMU (uses $ARCH, $TEST)
clean clean the sysroot, initramfs, build and output files
The output file is "run.out". Test ranges may be passed using $TEST.
Currently using the following variables:
ARCH = x86
CROSS_COMPILE =
CC = gcc
OUTPUT = /home/git/linux-rcu/tools/testing/selftests/nolibc/
TEST =
QEMU_ARCH = x86_64 [determined from $ARCH]
IMAGE_NAME = bzImage [determined from $ARCH]
The output of a successful x86 "make run" is currently as follows,
with kernel build output omitted:
$ make run
71 test(s) passed."
* tag 'nolibc.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests/nolibc: Avoid generated files being committed
selftests/nolibc: add a "help" target
selftests/nolibc: "sysroot" target installs a local copy of the sysroot
selftests/nolibc: add a "run" target to start the kernel in QEMU
selftests/nolibc: add a "defconfig" target
selftests/nolibc: add a "kernel" target to build the kernel with the initramfs
selftests/nolibc: support glibc as well
selftests/nolibc: condition some tests on /proc existence
selftests/nolibc: recreate and populate /dev and /proc if missing
selftests/nolibc: on x86, support exiting with isa-debug-exit
selftests/nolibc: exit with poweroff on success when getpid() == 1
selftests/nolibc: add a few tests for some libc functions
selftests/nolibc: implement a few tests for various syscalls
selftests/nolibc: support a test definition format
selftests/nolibc: add basic infrastructure to ease creation of nolibc tests
tools/nolibc: make sys_mmap() automatically use the right __NR_mmap definition
tools/nolibc: fix build warning in sys_mmap() when my_syscall6 is not defined
tools/nolibc: make argc 32-bit in riscv startup code
Three fixes for ARM:
- unbreak the RiscPC build
- fix wrong pg_level in page table dumper
- make MT_MEMORY_RO really read-only with LPAE
-----BEGIN PGP SIGNATURE-----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=OXHm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Three fixes for ARM:
- unbreak the RiscPC build
- fix wrong pg_level in page table dumper
- make MT_MEMORY_RO really read-only with LPAE"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE
ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd()
ARM: 9243/1: riscpc: Unbreak the build
Make sure modes with crazy big dotclocks are rejected early,
so as to not cause problems for subsequent code via integer
overflows and whatnot.
These would eventually be rejected in intel_crtc_compute_pipe_mode()
but that is now too late as we do the clock computations a bit
earlier than that. And we don't want to just reorder the two since
we still want to check the final computed dotclock against the
hardware limit to make sure we didn't end up above the limit due
to rounding/etc.
Fixes: 0ff0e219d9 ("drm/i915: Compute clocks earlier")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927182455.3422-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit df2f59c585)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Take the DG2 CCS+CC modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
tile-4 modifier is linear.
The rc_surface part is actually a nop since that is not used
for any glk+ platform.
Cc: stable@vger.kernel.org
Fixes: 680025dcc4 ("drm/i915/dg2: Add support for DG2 clear color compression")
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-6-ville.syrjala@linux.intel.com
(cherry picked from commit 334810f820)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Take the DG2 CCS modifiers into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking these
tile-4 modifiers are linear.
The rc_surface part is actually a nop since that is not used
for any glk+ platform.
Cc: stable@vger.kernel.org
Fixes: 4c3afa7213 ("drm/i915/dg2: Add support for DG2 render and media compression")
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-5-ville.syrjala@linux.intel.com
(cherry picked from commit f25d9f81a8)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Take the gen12+ CCS+CC modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
Y-tiled modifier is linear.
The rc_surface part is actually a nop since that is not used
for any glk+ platform.
Cc: stable@vger.kernel.org
Fixes: d1e2775e9b ("drm/i915/tgl: Add Clear Color support for TGL Render Decompression")
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-4-ville.syrjala@linux.intel.com
(cherry picked from commit a627455bbe)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Take the gen12+ MC CCS modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
Y-tiled modifier is linear.
The rc_surface part is actually a nop since that is not used
for any glk+ platform.
v2: Split RC CCS vs. MC CCS to separate patches
Cc: stable@vger.kernel.org
Fixes: 2dfbf9d287 ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine")
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-3-ville.syrjala@linux.intel.com
(cherry picked from commit 91c9651425)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Take the gen12+ RC CCS modifier into account when calculating the
watermarks. Othwerwise we'll calculate the watermarks thinking this
Y-tiled modifier is linear.
The rc_surface part is actually a nop since that is not used
for any glk+ platform.
v2: Split RC CCS vs. MC CCS to separate patches
Cc: stable@vger.kernel.org
Fixes: b3e57bccd6 ("drm/i915/tgl: Gen-12 render decompression")
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003111544.8007-2-ville.syrjala@linux.intel.com
(cherry picked from commit a89a96a586)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Current PSR code is supposed to use TRANSCODER_EDP to force 0 shift for
bits in PSR_IMR/IIR registers:
/*
* gen12+ has registers relative to transcoder and one per transcoder
* using the same bit definition: handle it as TRANSCODER_EDP to force
* 0 shift in bit definition
*/
At the time of writing the code assumption "TRANSCODER_EDP == 0" was made.
This is not the case and all fields in PSR_IMR and PSR_IIR are shifted
incorrectly if DISPLAY_VER >= 12.
Fix this by adding separate register field defines for >=12 and add bit
getter functions to keep code readability.
v4:
- Remove EDP from TGL definitions (José)
- Use REG_BIT and REG_GENMASK (José)
v3:
- Add separate register field defines (José)
- Add bit getter functions (José)
v2:
- Improve commit message (José)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Fixes: 8241cfbe67 ("drm/i915/tgl: Access the right register when handling PSR interruptions")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003072011.72408-1-jouni.hogander@intel.com
(cherry picked from commit 8da8e32e0b)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Add these extra EHL entries back since we have
drm-tip commit 13d29c8237
("drm/i915/ehl: unconditionally flush the pages on acquire")
introduces proper flushing to make it work as expected.
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Fixes: 046091758b ("Revert "drm/i915/ehl: Update MOCS table for EHL"")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930133223.2757282-1-tejas.upadhyay@intel.com
(cherry picked from commit 6fa964c045)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
- Fix forward secrecy of RNG seed boot record handling,
- Make RNG seed boot record handling generic for all m68k platforms
using bootinfo,
- Defconfig updates,
- Minor fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYzq9BBUcZ2VlcnRAbGlu
dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XA1xgEA4GWu3plxqwzhnMQjHIWxbWL0O5jo
96l6xFfZpF3qPN8A/2QQ/aZg4zKGCDwz6OFFI7muesfYJvQFeAum1JTAMzYC
=U0TY
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Fix forward secrecy of RNG seed boot record handling
- Make RNG seed boot record handling generic for all m68k platforms
using bootinfo
- defconfig updates
- Minor fixes and improvements
* tag 'm68k-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Rework BI_VIRT_RNG_SEED as BI_RNG_SEED
m68k: Process bootinfo records before saving them
m68k: defconfig: Update defconfigs for v6.0-rc2
m68k: Allow kexec on M68KCLASSIC with MMU enabled only
m68k: Move from strlcpy with unused retval to strscpy
Masami has been maintaining kprobes for a while now and that code has
been an integral part of tracing. He has also been an excellent reviewer
of all the tracing code and contributor as well.
The tracing subsystem needs another active maintainer to keep it running
smoothly, and I do not know anyone more qualified for the job than Masami.
Ingo has also told me that he has not been active in the tracing code for
some time and said he could be removed from the TRACING portion of the
MAINTAINERS file.
Link: https://lkml.kernel.org/r/20220930124131.7b6432dd@gandalf.local.home
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, of_find_next_cache_node() and of_property_read_u32()
are called on objects after their refcount have been decremented.
Re-order the calls to decrement the refcount after the function
calls.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20220930144936.2882481-1-pierre.gondois@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Reported by Clang [-Wunused-but-set-variable]
'commit c193707dde ("tracing: Remove code which merges duplicates")'
This commit removed the code which merges duplicates in detect_dups(),
but forgot to delete the variable 'dups' which used to merge
duplicates in the loop.
Now only 'total_dups' is needed, remove 'dups' for clean code.
Link: https://lkml.kernel.org/r/20220930103236.253985-1-chenzhongjin@huawei.com
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Sphinx reported warnings on missing implementation notes documentations in the
table of contents:
Documentation/bpf/clang-notes.rst: WARNING: document isn't included in any toctree
Documentation/bpf/linux-notes.rst: WARNING: document isn't included in any toctree
Add these documentations to the table of contents (index.rst) of BPF
documentation to fix the warnings.
Link: https://lore.kernel.org/linux-doc/202210020749.yfgDZbRL-lkp@intel.com/
Fixes: 6c7aaffb24 ("bpf, docs: Move Clang notes to a separate file")
Fixes: 6166da0a02 ("bpf, docs: Move legacy packet instructions to a separate file")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20221002032022.24693-1-bagasdotme@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since I'm actively involved in a number of arch bits that intersect
ftrace (e.g. the actual arch implementation on arm64, stacktracing,
entry management, and general instrumentation safety), add myself as a
reviewer of the core ftrace code so that I have the change to catch any
potential problems early.
I spoke with Steven about this at LPC, and it seemed to make sense to
add me as a reviewer.
Link: https://lkml.kernel.org/r/20220928114621.248038-1-mark.rutland@arm.com
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Daniele needs 84d4333c1e ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Since I already broke anything that relied on the old contents
of the DRRS debugfs files might as well finish the breakage
and convert the files to be per-crtc/connector so we don't need
to have annoying code in igt to parse these.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003113249.16213-4-ville.syrjala@linux.intel.com
The stuff in the DRRS debugs is currently a hodgepode mix
of camelcase, lowercase, spaces, undescores, you name it.
Convert over to a reasonably common style.
Also move the busy bits thing to be the last sine it's
generally the least interesting thing in there.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221003113249.16213-3-ville.syrjala@linux.intel.com
Make sure modes with crazy big dotclocks are rejected early,
so as to not cause problems for subsequent code via integer
overflows and whatnot.
These would eventually be rejected in intel_crtc_compute_pipe_mode()
but that is now too late as we do the clock computations a bit
earlier than that. And we don't want to just reorder the two since
we still want to check the final computed dotclock against the
hardware limit to make sure we didn't end up above the limit due
to rounding/etc.
Fixes: 0ff0e219d9 ("drm/i915: Compute clocks earlier")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927182455.3422-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
