This patch moves the bpf_setsockopt(TCP_CONGESTION) logic into
another function. The next patch will add extra logic to avoid
recursion and this will make the latter patch easier to follow.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220929070407.965581-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The check on the tcp-cc, "cdg", is done in the bpf_sk_setsockopt which is
used by the bpf_tcp_ca, bpf_lsm, cg_sockopt, and tcp_iter hooks.
However, it is not done for cg sock_ddr, cg sockops, and some of
the bpf_lsm_cgroup hooks.
The tcp-cc "cdg" should have very limited usage. This patch is to
move the "cdg" check to the common sol_tcp_sockopt() so that all
hooks have a consistent behavior. The motivation to make
this check consistent now is because the latter patch will
refactor the bpf_setsockopt(TCP_CONGESTION) into another function,
so it is better to take this chance to refactor this piece
also.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220929070407.965581-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The struct_ops prog is to allow using bpf to implement the functions in
a struct (eg. kernel module). The current usage is to implement the
tcp_congestion. The kernel does not call the tcp-cc's ops (ie.
the bpf prog) in a recursive way.
The struct_ops is sharing the tracing-trampoline's enter/exit
function which tracks prog->active to avoid recursion. It is
needed for tracing prog. However, it turns out the struct_ops
bpf prog will hit this prog->active and unnecessarily skipped
running the struct_ops prog. eg. The '.ssthresh' may run in_task()
and then interrupted by softirq that runs the same '.ssthresh'.
Skip running the '.ssthresh' will end up returning random value
to the caller.
The patch adds __bpf_prog_{enter,exit}_struct_ops for the
struct_ops trampoline. They do not track the prog->active
to detect recursion.
One exception is when the tcp_congestion's '.init' ops is doing
bpf_setsockopt(TCP_CONGESTION) and then recurs to the same
'.init' ops. This will be addressed in the following patches.
Fixes: ca06f55b90 ("bpf: Add per-program recursion prevention mechanism")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220929070407.965581-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The driver field in the struct snd_ctl_card_info is a valid
user space identifier. Actually, many ASoC drivers do not care
and let to initialize this field using a standard wrapping method.
Unfortunately, in this way, this field becomes unusable and
unreadable for the drivers with longer card names. Also,
there is a possibility to have clashes (driver field has
only limit of 15 characters).
This change will print an error when the wrapping is used.
The developers of the affected drivers should fix the problem.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
* irq/misc-6.1:
: .
: Misc irqchip updates for 6.1:
:
: - Allow generic irqchip support without selecting CONFIG_OF_IRQ
:
: - Fix a couple of bindings for TI interrupts controllers
:
: - Yet another binding update for a Renesas SoC
:
: - The obligatory fixes from the spelling police
: .
dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
irqchip/gic-v3: Fix typo in comment
dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
irqchip: Make irqchip_init() usable on pure ACPI systems
Signed-off-by: Marc Zyngier <maz@kernel.org>
* irq/fsl-mu-msi:
: .
: Platform MSI controller driver for the IMX MU block
:
: Patches from Frank Li.
: .
dt-bindings: irqchip: Describe the IMX MU block as a MSI controller
irqchip: Add IMX MU MSI controller driver
irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END
platform-msi: Export symbol platform_msi_create_irq_domain()
Signed-off-by: Marc Zyngier <maz@kernel.org>
I.MX MU supports generating IRQs by writing to a register.
Describe its use as a MSI controller so that other blocks (such as a PCI EP)
can use it directly.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[maz: commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220922161246.20586-5-Frank.Li@nxp.com
If a reset domain is attached to the device, obtain a shared reference
to it and trigger it. Typically on a chip the ADMAC controller will
share a reset domain with the MCA peripheral.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220918095845.68860-5-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This is in advance of adding support for triggering the reset signal to
the peripheral, since registering the IRQ handler will have to be
sequenced with it.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220918095845.68860-4-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The MU block found in a number of Freescale/NXP SoCs supports generating
IRQs by writing data to a register.
This enables the MU block to be used as a MSI controller, by leveraging
the platform-MSI API.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[maz: dropped pointless dma-iommu.h and of_pci.h includes]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220922161246.20586-4-Frank.Li@nxp.com
We still have some historic cases of direct fiddling of page
attributes with (dangerous & fragile) type casting and address shifting.
Add the prot_sethuge() helper instead that gets the types right and
doesn't have to transform addresses.
( Also add a debug check to make sure this doesn't get applied
to _PAGE_BIT_PAT/_PAGE_BIT_PAT_LARGE pages. )
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
These functions are defined in the edma.c file, but not called elsewhere,
so delete these unused functions.
drivers/dma/ti/edma.c:746:31: warning: unused function 'to_edma_cc'.
drivers/dma/ti/edma.c:420:20: warning: unused function 'edma_param_or'.
drivers/dma/ti/edma.c:414:20: warning: unused function 'edma_param_and'.
drivers/dma/ti/edma.c:402:20: warning: unused function 'edma_param_write'.
drivers/dma/ti/edma.c:373:28: warning: unused function 'edma_shadow0_read'.
drivers/dma/ti/edma.c:396:28: warning: unused function 'edma_param_read'.
drivers/dma/ti/edma.c:355:20: warning: unused function 'edma_or_array'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2152
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220914101943.83929-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As a user recently noted, the qcom,bam-dma binding document
describes the msm8974 BAM DMA node in the 'example section'
incorrectly. Fix the same by making it consistent with the node
present inside 'qcom-msm8974' dts file, namely the 'reg' and
'interrupt' values which are incorrect in the 'example section'.
While at it also make two additioanal minor cleanups:
- mention Bjorn's new email ID in the document, and
- add SDM845 in the comment line for the SoCs on which
qcom,bam-v1.7.0 version is supported.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220926112200.1948080-1-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
remove the double word to.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220920020721.2190-1-wangdeming@inspur.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Don't populate the read-only array driving_params on the stack but instead
make it static const. Also makes the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220929130147.97375-1-colin.i.king@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- small fixes for iqs62x-keys and melfas_mip4 drivers
- corrected register address in snvs_pwrkey driver
- Synaptic driver will stop trying to use intertouch (native) mode on
some Lenovo AMD devices
-----BEGIN PGP SIGNATURE-----
iJAEABYKADgWIQST2eWILY88ieB2DOtAj56VGEWXnAUCYzUgfBocZG1pdHJ5LnRv
cm9raG92QGdtYWlsLmNvbQAKCRBAj56VGEWXnEkhAP4/cOTiILkNKTzbu3nPAFn5
qVBp+wDpFrjN5zQKEIyOVgEAr5k7STjixjnneZnR7+ppald6Ti7LXaTESoXnqrY9
XwY=
=zsDx
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- small fixes for iqs62x-keys and melfas_mip4 drivers
- corrected register address in snvs_pwrkey driver
- Synaptic driver will stop trying to use intertouch (native) mode on
some Lenovo AMD devices
* tag 'input-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: snvs_pwrkey - fix SNVS_HPVIDR1 register address
Input: synaptics - disable Intertouch for Lenovo T14 and P14s AMD G1
Input: iqs62x-keys - drop unused device node references
Input: melfas_mip4 - fix return value check in mip4_probe()
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220928145256.1879256-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of mt6660_i2c_probe.
Fixes:f289e55c6eeb4 ("ASoC: Add MediaTek MT6660 Speaker Amp Driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-5-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm5102_probe.
Fixes:93e8791dd34ca ("ASoC: wm5102: Initial driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm5110_probe.
Fixes:5c6af635fd772 ("ASoC: wm5110: Add audio CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-3-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by moving
pm_runtime_enable to the endding of wm8997_probe
Fixes:40843aea5a9bd ("ASoC: wm8997: Initial CODEC driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160116.125020-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
syzbot is reporting uninit-value in btrfs_clean_tree_block() [1], for
commit bc877d285c ("btrfs: Deduplicate extent_buffer init code")
missed that btrfs_set_header_generation() in btrfs_init_new_buffer() must
not be moved to after clean_tree_block() because clean_tree_block() is
calling btrfs_header_generation() since commit 55c69072d6 ("Btrfs:
Fix extent_buffer usage when nodesize != leafsize").
Since memzero_extent_buffer() will reset "struct btrfs_header" part, we
can't move btrfs_set_header_generation() to before memzero_extent_buffer().
Just re-add btrfs_set_header_generation() before btrfs_clean_tree_block().
Link: https://syzkaller.appspot.com/bug?extid=fba8e2116a12609b6c59 [1]
Reported-by: syzbot <syzbot+fba8e2116a12609b6c59@syzkaller.appspotmail.com>
Fixes: bc877d285c ("btrfs: Deduplicate extent_buffer init code")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently when dropping extent maps for a file range, through
btrfs_drop_extent_map_range(), we do the following non-optimal things:
1) We lookup for extent maps one by one, always starting the search from
the root of the extent map tree. This is not efficient if we have
multiple extent maps in the range;
2) We check on every iteration if we have the 'split' and 'split2' spare
extent maps in case we need to split an extent map that intersects our
range but also crosses its boundaries (to the left, to the right or
both cases). If our target range is for example:
[2M, 8M)
And we have 3 extents maps in the range:
[1M, 3M) [3M, 6M) [6M, 10M[
The on the first iteration we allocate two extent maps for 'split' and
'split2', and use the 'split' to split the first extent map, so after
the split we set 'split' to 'split2' and then set 'split2' to NULL.
On the second iteration, we don't need to split the second extent map,
but because 'split2' is now NULL, we allocate a new extent map for
'split2'.
On the third iteration we need to split the third extent map, so we
use the extent map pointed by 'split'.
So we ended up allocating 3 extent maps for splitting, but all we
needed was 2 extent maps. We never need to allocate more than 2,
because extent maps that need to be split are always the first one
and the last one in the target range.
Improve on this by:
1) Using rb_next() to move on to the next extent map. This results in
iterating over less nodes of the tree and it does not require comparing
the ranges of nodes to our start/end offset;
2) Allocate the 2 extent maps for splitting before entering the loop and
never allocate more than 2. In practice it's very rare to have the
combination of both extent map allocations fail, since we have a
dedicated slab for extent maps, and also have the need to split two
extent maps.
This patch is part of a patchset comprised of the following patches:
btrfs: fix missed extent on fsync after dropping extent maps
btrfs: move btrfs_drop_extent_cache() to extent_map.c
btrfs: use extent_map_end() at btrfs_drop_extent_map_range()
btrfs: use cond_resched_rwlock_write() during inode eviction
btrfs: move open coded extent map tree deletion out of inode eviction
btrfs: add helper to replace extent map range with a new extent map
btrfs: remove the refcount warning/check at free_extent_map()
btrfs: remove unnecessary extent map initializations
btrfs: assert tree is locked when clearing extent map from logging
btrfs: remove unnecessary NULL pointer checks when searching extent maps
btrfs: remove unnecessary next extent map search
btrfs: avoid pointless extent map tree search when flushing delalloc
btrfs: drop extent map range more efficiently
And the following fio test was done before and after applying the whole
patchset, on a non-debug kernel (Debian's default kernel config) on a 12
cores Intel box with 64G of ram:
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-R free-space-tree -O no-holes"
cat <<EOF > /tmp/fio-job.ini
[writers]
rw=randwrite
fsync=8
fallocate=none
group_reporting=1
direct=0
bssplit=4k/20:8k/20:16k/20:32k/10:64k/10:128k/5:256k/5:512k/5:1m/5
ioengine=psync
filesize=2G
runtime=300
time_based
directory=$MNT
numjobs=8
thread
EOF
echo performance | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
echo
echo "Using config:"
echo
cat /tmp/fio-job.ini
echo
umount $MNT &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
fio /tmp/fio-job.ini
umount $MNT
Result before applying the patchset:
WRITE: bw=197MiB/s (206MB/s), 197MiB/s-197MiB/s (206MB/s-206MB/s), io=57.7GiB (61.9GB), run=300188-300188msec
Result after applying the patchset:
WRITE: bw=203MiB/s (213MB/s), 203MiB/s-203MiB/s (213MB/s-213MB/s), io=59.5GiB (63.9GB), run=300019-300019msec
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When flushing delalloc, in COW mode at cow_file_range(), before entering
the loop that allocates extents and creates ordered extents, we do a call
to btrfs_drop_extent_map_range() for the whole range. This is pointless
because in the loop we call create_io_em(), which will also call
btrfs_drop_extent_map_range() before inserting the new extent map.
So remove that call at cow_file_range() not only because it is not needed,
but also because it will make the btrfs_drop_extent_map_range() calls made
from create_io_em() waste time searching the extent map tree, and that
tree can be large for files with many extents. It also makes us waste time
at btrfs_drop_extent_map_range() allocating and freeing the split extent
maps for nothing.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At __tree_search(), and its single caller __lookup_extent_mapping(), there
is no point in finding the next extent map that starts after the search
offset if we were able to find the previous extent map that ends before
our search offset, because __lookup_extent_mapping() ignores the next
acceptable extent map if we were able to find the previous one.
So just return immediately if we were able to find the previous extent
map, therefore avoiding wasting time iterating the tree looking for the
next extent map which will not be used by __lookup_extent_mapping().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The previous and next pointer arguments passed to __tree_search() are
never NULL as the only caller of this function, __lookup_extent_mapping(),
always passes the address of two on stack pointers. So remove the NULL
checks and add assertions to verify the pointers.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When calling clear_em_logging() we should have a write lock on the extent
map tree, as we will try to merge the extent map with the previous and
next ones in the tree. So assert that we have a write lock.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When allocating an extent map, we use kmem_cache_zalloc() which guarantees
the returned memory is initialized to zeroes, therefore it's pointless
to initialize the generation and flags of the extent map to zero again.
Remove those initializations, as they are pointless and slightly increase
the object text size.
Before removing them:
$ size fs/btrfs/extent_map.o
text data bss dec hex filename
9241 274 24 9539 2543 fs/btrfs/extent_map.o
After removing them:
$ size fs/btrfs/extent_map.o
text data bss dec hex filename
9209 274 24 9507 2523 fs/btrfs/extent_map.o
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At free_extent_map(), it's pointless to have a WARN_ON() to check if the
refcount of the extent map is zero. Such check is already done by the
refcount_t module and refcount_dec_and_test(), which loudly complains if
we try to decrement a reference count that is currently 0.
The WARN_ON() dates back to the time when used a regular atomic_t type
for the reference counter, before we switched to the refcount_t type.
The main goal of the refcount_t type/module is precisely to catch such
types of bugs and loudly complain if they happen.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several places that need to drop all the extent maps in a given
file range and then add a new extent map for that range. Currently they
call btrfs_drop_extent_map_range() to delete all extent maps in the range
and then keep trying to add the new extent map in a loop that keeps
retrying while the insertion of the new extent map fails with -EEXIST.
So instead of repeating this logic, add a helper to extent_map.c that
does these steps and name it btrfs_replace_extent_map_range(). Also add
a comment about why the retry loop is necessary.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the loop that removes all the extent maps from the inode's extent
map tree during inode eviction out of inode.c and into extent_map.c, to
btrfs_drop_extent_map_range(). Anything manipulating extent maps or the
extent map tree should be in extent_map.c.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At evict_inode_truncate_pages(), instead of manually checking if
rescheduling is needed, then unlock the extent map tree, reschedule and
then write lock again the tree, use the helper cond_resched_rwlock_write()
which does all that.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of open coding the end offset calculation of an extent map, use
the helper extent_map_end() and cache its result in a local variable,
since it's used several times.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_drop_extent_cache() doesn't really belong at file.c
because what it does is drop a range of extent maps for a file range.
It directly allocates and manipulates extent maps, by dropping,
splitting and replacing them in an extent map tree, so it should be
located at extent_map.c, where all manipulations of an extent map tree
and its extent maps are supposed to be done.
So move it out of file.c and into extent_map.c. Additionally do the
following changes:
1) Rename it into btrfs_drop_extent_map_range(), as this makes it more
clear about what it does. The term "cache" is a bit confusing as it's
not widely used, "extent maps" or "extent mapping" is much more common;
2) Change its 'skip_pinned' argument from int to bool;
3) Turn several of its local variables from int to bool, since they are
used as booleans;
4) Move the declaration of some variables out of the function's main
scope and into the scopes where they are used;
5) Remove pointless assignment of false to 'modified' early in the while
loop, as later that variable is set and it's not used before that
second assignment;
6) Remove checks for NULL before calling free_extent_map().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When dropping extent maps for a range, through btrfs_drop_extent_cache(),
if we find an extent map that starts before our target range and/or ends
before the target range, and we are not able to allocate extent maps for
splitting that extent map, then we don't fail and simply remove the entire
extent map from the inode's extent map tree.
This is generally fine, because in case anyone needs to access the extent
map, it can just load it again later from the respective file extent
item(s) in the subvolume btree. However, if that extent map is new and is
in the list of modified extents, then a fast fsync will miss the parts of
the extent that were outside our range (that needed to be split),
therefore not logging them. Fix that by marking the inode for a full
fsync. This issue was introduced after removing BUG_ON()s triggered when
the split extent map allocations failed, done by commit 7014cdb493
("Btrfs: btrfs_drop_extent_cache should never fail"), back in 2012, and
the fast fsync path already existed but was very recent.
Also, in the case where we could allocate extent maps for the split
operations but then fail to add a split extent map to the tree, mark the
inode for a full fsync as well. This is not supposed to ever fail, and we
assert that, but in case assertions are disabled (CONFIG_BTRFS_ASSERT is
not set), it's the correct thing to do to make sure a fast fsync will not
miss a new extent.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function no longer exists, was removed in 3c4276936f ("Btrfs: fix
btrfs_write_inode vs delayed iput deadlock").
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable nowait async buffered writes in btrfs_do_write_iter() and
btrfs_file_open().
In this version encoded buffered writes have the optimization not
enabled. Encoded writes are enabled by using an ioctl. io_uring
currently does not support ioctls. This might be enabled in the future.
Performance results:
For fio the following results have been obtained with a queue depth of
1 and 4k block size (runtime 600 secs):
sequential writes:
without patch with patch libaio psync
iops: 55k 134k 117K 148K
bw: 221MB/s 538MB/s 469MB/s 592MB/s
clat: 15286ns 82ns 994ns 6340ns
For an io depth of 1, the new patch improves throughput by over two
times (compared to the existing behavior, where buffered writes are
processed by an io-worker process) and also the latency is considerably
reduced. To achieve the same or better performance with the existing
code an io depth of 4 is required. Increasing the iodepth further does
not lead to improvements.
The tests have been run like this:
./fio --name=seq-writers --ioengine=psync --iodepth=1 --rw=write \
--bs=4k --direct=0 --size=100000m --time_based --runtime=600 \
--numjobs=1 --filename=...
./fio --name=seq-writers --ioengine=io_uring --iodepth=1 --rw=write \
--bs=4k --direct=0 --size=100000m --time_based --runtime=600 \
--numjobs=1 --filename=...
./fio --name=seq-writers --ioengine=libaio --iodepth=1 --rw=write \
--bs=4k --direct=0 --size=100000m --time_based --runtime=600 \
--numjobs=1 --filename=...
Testing:
This patch has been tested with xfstests, fsx, fio. xfstests shows no new
diffs compared to running without the patch series.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Adds nowait asserts to btree search functions which are not used by
buffered IO and direct IO paths.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We need to avoid unconditionally calling balance_dirty_pages_ratelimited
as it could wait for some reason. Use balance_dirty_pages_ratelimited_flags
with the BDP_ASYNC in case the buffered write is nowait, returning
EAGAIN eventually.
It also moves the function after the again label. This can cause the
function to be called a bit later, but this should have no impact in the
real world.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have everywhere setup for nowait, plumb NOWAIT through the write path.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add the nowait parameter to lock_and_cleanup_extent_if_need(). If the
nowait parameter is specified we try to lock the extent in nowait mode.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add nowait parameter to the prepare_pages function. In case nowait is
specified for an async buffered write request, do a nowait allocation or
return -EAGAIN.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now all the helpers that btrfs_check_nocow_lock uses handle nowait, add
a nowait flag to btrfs_check_nocow_lock so it can be used by the write
path.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For IOCB_NOWAIT we're going to want to use try lock on the extent lock,
and simply bail if there's an ordered extent in the range because the
only choice there is to wait for the ordered extent to complete.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to accommodate NOWAIT IOCB's we need to be able to do NO_FLUSH
data reservations, so plumb this through the delalloc reservation
system.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
