While converting max_tx_rate from bytes to Mbps, this value was set to 0,
if the original value was lower than 125000 bytes (1 Mbps). This would
cause no transmission rate limiting to occur. This happened due to lack of
check of max_tx_rate against the 1 Mbps value for max_tx_rate and the
following division by 125000. Fix this issue by adding a helper
i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of
50 Mbps, if its value is less than 1 Mbps, otherwise do the required
conversion by dividing by 125000.
Fixes: 5ecae4120a ("i40e: Refactor VF BW rate limiting")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Max MTU sent to VF is set to 0 during memory allocation. It cause
that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not
depend on data from HW.
Set max_mtu field in virtchnl_vf_resource struct to inform
VF in GET_VF_RESOURCES msg what size should be max frame.
Fixes: dab86afdbb ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After setting port VLAN and MTU to 9000 on VF with ice driver there
was an iavf error
"PF returned error -5 (IAVF_ERR_PARAM) to our request 6".
During queue configuration, VF's max packet size was set to
IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN
due to making some space for port VLAN as VF is not aware whether it's
in a port VLAN. This mismatch in sizes caused ice to reject queue
configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF
to VF with GET_VF_RESOURCES msg but VF does not look at this.
In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu
received from pf with GET_VF_RESOURCES msg to make vf's
max_frame_size dependent from pf. Add check if received max_mtu is
not in eligible range then set it to IAVF_MAX_RXBUFFER.
Fixes: dab86afdbb ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The MDIO gateway (GW) lock in BlueField-2 GIGE logic is
set after read. This patch adds logic to make sure the
lock is always cleared at the end of each MDIO transaction.
Fixes: f92e1869d7 ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20220902164247.19862-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I found no evidence that this chip version ever made it to the mass
market. Therefore disable detection. Like in similar cases before:
If nobody complains, we'll remove support for this chip version after
few months.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/ac622d4a-ae0a-3817-710f-849db4015c78@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is always unnecessary to initialise statics to 0.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
fs_mii_disconnect and fs_mii_connect have been removed since
commit 5b4b845434 ("[PATCH] FS_ENET: use PAL for mii management"),
so remove them.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220909062959.1144493-1-cuigaosheng1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The double `in' is duplicated in line 172, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Currently the panic notifiers from user mode linux don't follow
the convention for most of the other notifiers present in the
kernel (indentation, priority setting, numeric return).
More important, the priorities could be improved, since it's a
special case (userspace), hence we could run the notifiers earlier;
user mode linux shouldn't care much with other panic notifiers but
the ordering among the mconsole and arch notifier is important,
given that the arch one effectively triggers a core dump.
Fix that by running the mconsole notifier as the first panic
notifier, followed by the architecture one (that coredumps).
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
V3:
- No changes.
V2:
- Kept the notifier header to avoid implicit usage - thanks
Johannes for the suggestion!
Signed-off-by: Richard Weinberger <richard@nod.at>
Fix bad page state, free inappropriate page in handling dummy
descriptor. iavf_build_skb now has to check not only if rx_buffer is
NULL but also if size is zero, same thing in iavf_clean_rx_irq.
Without this patch driver would free page that will be used
by napi_build_skb.
Fixes: a9f49e0060 ("iavf: Fix handling of dummy receive descriptors")
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
All uses of reactivate_chan() were removed by
commit 940b241d90 ("um: Remove obsolete reenable_XX
calls"), so remove the declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Use READ_ONCE_NOCHECK() when reading the stack to prevent KASAN splats
when dump_stack() is used.
Fixes: 5b301409e8 ("UML: add support for KASAN under x86_64")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The current 32 MiB of RAM causes OOMs to appear shortly after
booting in a minimal OpenWrt 22.03 configuration with a
5.10.134 kernel.
Of course, passing a "mem=64M" (from the --help text) parameter
works too, but it produces the following (info) message:
| [ 0.000000] Unknown kernel command line parameters "mem=64M", will be passed to user space.
That's why, I think it would be nicer, if this is working out
of the box again :).
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
OpenWrt's UML with 5.15 was producing odd errors/warnings during preinit
part of the early userspace portion:
|[ 0.000000] Kernel command line: ubd0=root.img root=98:0 console=tty
|[...]
|[ 0.440000] random: jshn: uninitialized urandom read (4 bytes read)
|[ 0.460000] random: jshn: uninitialized urandom read (4 bytes read)
|/etc/preinit: line 47: can't create /dev/tty: No such device or address
|/etc/preinit: line 48: can't create /dev/tty: No such device or address
|/etc/preinit: line 58: can't open /dev/tty: No such device or address
|[...] repeated many times
That "/dev/tty" came from the command line (which is automatically
added if no console= parameter was specified for the uml binary).
The TLDP project tells the following about the /dev/tty:
<https://tldp.org/HOWTO/Text-Terminal-HOWTO-7.html#ss7.3>
| /dev/tty stands for the controlling terminal (if any) for the current
| process.[...]
| /dev/tty is something like a link to the actually terminal device[..]
The "(if any)" is important here, since it's possible for processes to
not have a controlling terminal.
I think this was a simple typo and the author wanted tty0 there.
CC: Thomas Meyer <thomas@m3y3r.de>
Fixes: d7ffac3363 ("um: stdio_console: Make preferred console")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS is activated, the user mode
linux virtio irq handler only read one msg from the corresponding socket.
This creates issues, when the device emulation creates multiple call
requests (e.g. for multiple virtqueues), as the socket buffer tend to fill
up and the call requests are delayed.
This creates a deadlock situation, when the device simulation blocks,
because of sending a msg and the kernel side blocks because of
synchronously waiting for an acknowledge of kick request.
Actually inband notifications are meant to be used in combination with the
time travel protocol, but it is not required, therefore this corner case
needs to be handled.
Anyways, in general it seems to be more natural to consume always all
messages from a socket, instead of only a single one.
Fixes: 2cd097ba8c ("um: virtio: Implement VHOST_USER_PROTOCOL_F_SLAVE_REQ")
Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
arch.tls_array is statically allocated so checking for NULL doesn't
make sense. This causes the compiler warning below.
Remove the checks to silence these warnings.
../arch/x86/um/tls_32.c: In function 'get_free_idx':
../arch/x86/um/tls_32.c:68:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
68 | if (!t->arch.tls_array)
| ^
In file included from ../arch/x86/um/asm/processor.h:10,
from ../include/linux/rcupdate.h:30,
from ../include/linux/rculist.h:11,
from ../include/linux/pid.h:5,
from ../include/linux/sched.h:14,
from ../arch/x86/um/tls_32.c:7:
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
| ^~~~~~~~~
../arch/x86/um/tls_32.c: In function 'get_tls_entry':
../arch/x86/um/tls_32.c:243:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
243 | if (!t->arch.tls_array)
| ^
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
| ^~~~~~~~~
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Like in f4f03f299a
"um: Cleanup syscall_handler_t definition/cast, fix warning",
remove the cast to to fix the compiler warning.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
This reverts commit 250195ff74.
The job should now be initialized when we reach the parser functions.
v2: merge improved application check into this patch
v3: back to the original test, but use the right ring
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the entity for the CS and scheduler job much earlier.
v2: fix job initialisation order and use correct scheduler instance
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return early on success and so remove all those "if (r)" in the error
path.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup the coding style and function names to represent the data
they process for pass2 as well.
Go over the chunks only twice now instead of multiple times.
v2: fix job initialisation order and use correct scheduler instance
v3: try to move all functional changes into a separate patch.
v4: separate reordering, pass1 and pass2 change
v5: fix va_start calculation
v6: fix user fence check
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V3:
[Why]:
Since ASICs using smu v13_0_2 have called smu
.suspend before calling amdgpu_pm_sysfs_fini,
pm.dpm_enabled was already set to 0 when smu
.suspend was called. This makes it impossible
to delete all pm sys nodes.
[How]:
Since all functions in amdgpu_pm_sysfs_fini
have their own condition checks, so the first
conditional check in amdgpu_pm_sysfs_fini can
be removed.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V3:
Fixed psp fence and memory issues for the asic
using smu v13_0_2 when removing amdgpu device.
[Why]:
1. psp_suspend->psp_free_shared_bufs->
psp_ta_free_shared_buf->
amdgpu_bo_free_kernel->
...->amdgpu_bo_release_notify->
amdgpu_fill_buffer
psp will free vram memory used by psp when psp_suspend
is called. But for the asic using smu v13_0_2, because
psp_suspend is called before adev->shutdown is set to
true when removing the first hive device, amdgpu fill_buffer
will be called, which will cause fence issues when evicting
all vram resources in amdgpu vram mgr_fini.
2. Since psp_hw_fini is not called after calling psp_suspend
and psp_suspend only calls psp_ring_stop, the psp ring memory
will not be released when amdgpu device is removed.
[How]:
1. Set shutdown to true before calling amdgpu_device_gpu_recover,
then amdgpu_fill_buffer will not be called when psp_suspend is
called.
2. Free psp ring memory in psp_sw_fini.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust removal control flow for smu v13_0_2:
During amdgpu uninstallation, when removing the first
device, the kernel needs to first send a mode1reset message
to all gpu devices. Otherwise, smu initialization will fail
the next time amdgpu is installed.
V2:
1. Update commit comments.
2. Remove the global variable amdgpu_device_remove_cnt
and add a variable to the structure amdgpu_hive_info.
3. Use hive to detect the first removed device instead of
a global variable.
V3:
1. Update commit comments.
2. Split a patch into multiple patches.
3. The current patch does:
a. Add a work mode of AMDGPU_RESET_FOR_DEVICE_REMOVE into
the existing gpu recover path, which make all devices
in hive list only have HW reset but no resume (except
the base IP).
b. Call AMDGPU_RESET_FOR_DEVICE_REMOVE and
AMDGPU_NEED_FULL_RESET mode of amdgpu_device_gpu_recover
in amdgpu_pci_remove when removing the first device in
hive list.
c. When removing the first device, the IP blocks keyword
function call sequence is as follows:
.suspend->mode1reset->.resume(basic ip)->.hw_fini->.early_fini->.sw_fini.
^ |
|-<----------<---------<----|
The first three sequences are because of a call to
amdgpu_device_gpu_recover. The three sequences will be
executed in a loop until all devices in the hive list
are iterated.
The sequences starting from .hw_fini only apply to the
first device. Since .suspend has been called before,
except the resumed phase1 basic ip blocks, all other ip
blocks .hw_fini of current device will do nothing.
d. When removing other devices, the calling sequences is the
same as legacy:
.hw_fini -> .early_fini -> .sw_fini.
Since .suspend has been called when removing the first device,
except the resumed phase1 basic ip blocks, all of other ip
blocks .hw_fini of current device will do nothing.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix urgent latency override for DCN32/DCN321
- Correct hostvm flag in DCN31
- Added new Asic Id for DCN301
- Adjust to 2 phys in DCN301
- Update dummy P-state search to use DCN32 DML
- Increase dcn315 pstate change latency
- Disable OTG WA for the plane_state NULL case on DCN314
- Update dccg based on HW delta
- Correct num_dsc for DCN314
- Fix DP DSC compliance failure with DCN314
- Refactor edp power sequencer codes
- update gamut remap if plane has changed
- Skip audio setup when audio stream is enabled
- Display distortion after hotplug LG Ultrafine 5K tiled display
- Fix DP MST timeslot issue when fallback happened
- Uncomment SubVP pipe split assignment in driver
- Enable committing subvp config
- Do second pass through DML for DET calculation
- Don't allocate DET for phantom pipes
- Modify DML to adjust Vstartup Position
- Ignore k1/k2 values for virtual signal to avoid assert
- Fix failures of disabling primary planes
- Do not compare integers of different widths
- Fix empty slot problem of EDID management
- Revise Sink device string ID width in dmub psr
- Log vertical interrupt 1 for debug
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
num_dsc is 3 for dcn314 based on HW capablity.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is a coding error when moving dp disable link phy to
hw sequencer, where the receiver power control is missed during
this refactor.
[how]
1. Add back missing receiver power control in disable link phy.
2. minor modifications to ensure there is no undesired sequence
changes in dp link enable/disable.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
update hw dccg based on HW delta, and reuse common src code
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
If we find that DML requires pipe split, run through
DML again because the DET allocation per pipe must
be re-assigned.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Extend existing OTG state collection function to include the vertical
interrupt 1 state.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The Sink device string ID1/ID2 use 5 bytes instead of 6 bytes,
so the driver should compare the first 5 bytes only.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Robin Chen <po-tchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The Vstartup position should be as late as possible to
maximize power saving with the current. Calculation of
Vstartup in DML does not take into account as SDP signal.
[HOW]
Made necessary changes to calculate the correct Vstartup
position in DML to account for AS SDP
* Overriding the VBlankNom value in certain cases
otherwise it will use the default value
* Bypassing the condition for adjust_sync_Vstartup
* Overriding vblank_nom_input with VBlankNom that is
set in the SW Layer
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: muansari <muansari@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This shouldn't trigger during tiled display hotplug/unplug but it does
because one of the tiles can end up with a NULL plane state.
This also doesn't guard against the hang that it was originally trying
to resolve, and can instead cause DIO corruption due to OTG sync
being lost.
[How]
This was reverted at one point out of DCN31 so revert it here too.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DP DSC compliance failing for dcn314 due to ICH_RESET_AT_END_OF_LINE
shift and mask being missing
[How]
Add in shift and mask for ICH_RESET_AT_END_OF_LINE
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and How]
Enable committing subvp config through DMCUB for DCN32
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
v1_5 display object table has no way for connectors to
indicate which slot they are a part of, resulting in additional
empty slots to appear in EDID management UI.
[How]
Assume that all connectors belong to the same slot.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Update after new measurment came in
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and How]
We are hitting k1/k2 assert when we are using a virtual signal in the
test; as a result, we are failing some automated tests with a false
positive. This commit addresses this issue by ignoring the assert
condition if we use SIGNAL_TYPE_VIRTUAL.
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
We should not allocate any DET for the phantom pipes.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When USB4 DP link training failed and fell back to lower link rate,
the time slot calculation uses the verified_link_cap.
And the verified_link_cap was not updated to the new one.
It caused the wrong VC payload time-slot was allocated.
[How]
Updated verified_link_cap with the new one from cur_link_settings
after the LT completes successfully.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During hot plug of specific 5K tiled display, sometimes both the tiles
are not synchronized resulting in distortion. The reason is that otgs of
both the tiles goes out of sync when otg workaround (dcnxxx_disable_otg_wa)
is applied for bandwidth optimization. The otg workaround reenables otg
but otg synchronization context is not reset and hence dc_trigger_sync()
does not resynchronize otg again.
[How]
Implement reset_sync_context_for_pipe() to reset the otg synchronization
context for the disabled pipe and its slave pipes when otg workaround is
applied.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current DCN3.2 logic for finding the dummy P-state index uses the
DCN3.0 DML validation function instead of DCN3.2 DML.
This can result in either unexpected DML VBA values, or unexpected
dummy P-state index to be used.
[How]
Update the dummy P-state logic to use DCN3.2 DML validation function.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Expose few dchubbun functions in dcn31 and dcn32 to leverage.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
