Add support for Radxa ROCK 4C+ SBC.
Key differences of 4C+ compared to previous ROCK Pi 4.
- Rockchip RK3399-T SoC
- DP from 4C replaced with micro HDMI 2K@60fps
- 4-lane MIPI DSI with 1920*1080
- RK817 Audio codec
Also, an official naming convention from Radxa mention to remove
Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not
Radxa ROCK Pi 4C+.
Signed-off-by: Stephen Chen <stephen@radxa.com>
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220902065057.97425-3-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK3399-T is down-clocked version of RK3399 SoC operated at 1.5GHz.
Add CPU operating points table for it.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220902065057.97425-2-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Document the dt-bindings for Radxa ROCK 4C+ SBC.
Key differences of 4C+ compared to previous ROCK Pi 4.
- Rockchip RK3399-T SoC
- DP from 4C replaced with micro HDMI 2K@60fps
- 4-lane MIPI DSI with 1920*1080
- RK817 Audio codec
Also, an official naming convention from Radxa mention to remove
Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not
Radxa ROCK Pi 4C+.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220902065057.97425-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The property "vbus-supply" was copied from the vendor kernel but is not
available in mainstream. Use correct property "phy-supply".
Fixes: d6cfb110b0 ("arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10")
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220905064335.104650-2-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The property "vbus-supply" was copied from the vendor kernel but is not
available in mainstream. Use correct property "phy-supply".
Fixes: 254a1f6a29 ("arm64: dts: rockchip: add usb3 support to the radxa rock3 model a")
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220905064335.104650-1-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add power domains support for RV1126 SoC.
Cypto, VO and NPU domains will add it future patches.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20220818124132.125304-4-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The SRv6 layer allows defining HMAC data that can later be used to sign IPv6
Segment Routing Headers. This configuration is realised via netlink through
four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and
SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual
length of the SECRET attribute, it is possible to provide invalid combinations
(e.g., secret = "", secretlen = 64). This case is not checked in the code and
with an appropriately crafted netlink message, an out-of-bounds read of up
to 64 bytes (max secret length) can occur past the skb end pointer and into
skb_shared_info:
Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
208 memcpy(hinfo->secret, secret, slen);
(gdb) bt
#0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
#1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600,
extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>,
family=<optimized out>) at net/netlink/genetlink.c:731
#2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00,
family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775
#3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792
#4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>)
at net/netlink/af_netlink.c:2501
#5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803
#6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000)
at net/netlink/af_netlink.c:1319
#7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>)
at net/netlink/af_netlink.c:1345
#8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921
...
(gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end
$1 = 0xffff88800b1b76c0
(gdb) p/x secret
$2 = 0xffff88800b1b76c0
(gdb) p slen
$3 = 64 '@'
The OOB data can then be read back from userspace by dumping HMAC state. This
commit fixes this by ensuring SECRETLEN cannot exceed the actual length of
SECRET.
Reported-by: Lucas Leong <wmliang.tw@gmail.com>
Tested: verified that EINVAL is correctly returned when secretlen > len(secret)
Fixes: 4f4853dc1c ("ipv6: sr: implement API to control SR HMAC structure")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On system suspend when system memory is low then i915_gem_obj_copy_ttm()
could fail trying to backup a lmem obj. GEM_WARN_ON() is not enough,
suspend shouldn't continue if i915_ttm_backup() throws an error.
v2: Keep the fdo issue till we have a igt test(Matt).
v3: Use %pe(Andrzej)
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6529
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Suggested-by: Chris P Wilson <chris.p.wilson@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901172217.18392-1-nirmoy.das@intel.com
Maxime Chevallier says:
====================
net: altera: tse: phylink conversion
This is V4 of a series converting the Altera TSE driver to phylink,
introducing a new PCS driver along the way.
The Altera TSE can be built with a SGMII/1000BaseX PCS, allowing to use
SFP ports with this MAC, which is the end goal of adding phylink support
and a proper PCS driver.
The PCS itself can either be mapped in the MAC's register space, in that
case, it's accessed through 32 bits registers, with the higher 16 bits
always 0. Alternatively, it can sit on its own register space, exposing
16 bits registers, some of which ressemble the standard PHY registers.
To tackle that rework, several things needs updating, starting by the DT
binding, since we add support for a new register range for the PCS.
Hence, the first patch of the series is a conversion to YAML of the
existing binding.
Then, patch 2 does a bit of simple cleanup to the TSE driver, using nice
reverse xmas tree definitions.
Patch 3 adds the actual PCS driver, as a standalone driver. Some future
series will then reuse that PCS driver from the dwmac-socfpga driver,
which implements support for this exact PCS too, allowing to share the
code nicely.
Patch 4 is then a phylink conversion of the altera_tse driver, to use
this new PCS driver.
Finally, patch 5 updates the newly converted DT binding to support the
pcs register range.
This series contains bits and pieces for this conversion, please tell me if
you want me to send it as individual patches.
V4 Changes:
- Add missing MODULE_* macros to the TSE PCS driver
V3 Changes:
- YAML binding conversion changes and PCS addition changes thanks to
Krzysztof's reviews
V2 Changes :
- Fixed the binding after the YAML conversion
- Added a pcs_validate() callback
- Introduced a comment to justify a soft reset for the PCS
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some implementations of the TSE have their PCS as an external bloc,
exposed at its own register range. Document this, and add a new example
showing a case using the pcs and the new phylink conversion to connect
an sfp port to a TSE mac.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the Altera Triple Speed Ethernet Controller to phylink.
This controller supports MII, GMII and RGMII with its MAC, and
SGMII + 1000BaseX through a small embedded PCS.
The PCS itself has a register set very similar to what is found in a
typical 802.3 ethernet PHY, but this register set memory-mapped instead
of lying on an mdio bus.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Altera Triple Speed Ethernet has a SGMII/1000BaseC PCS that can be
integrated in several ways. It can either be part of the TSE MAC's
address space, accessed through 32 bits accesses on the mapped mdio
device 0, or through a dedicated 16 bits register set.
This driver allows using the TSE PCS outside of altera TSE's driver,
since it can be used standalone by other MACs.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the driver code cleaner through a strictly cosmetic change, using
he reverse xmas tree variable declaration ordering.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the bindings for the Altera Triple-Speed Ethernet to yaml.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu says:
====================
bonding: fix lladdr finding and confirmation
This patch set fixed 3 issues when setting lladdr as bonding IPv6 target.
Please see each patch for the details.
v2: separate the patch to 3 parts
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The unsolicited NA message with all-nodes multicast dest address should
be valid, as this also means the link could reach the target.
Also rename bond_validate_ns() to bond_validate_na().
Reported-by: LiLiang <liali@redhat.com>
Fixes: 5e1eeef69c ("bonding: NS target should accept link local address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a link is enslave to bond, it need to set the interface down first.
This makes the slave remove mac multicast address 33:33:00:00:00:01(The
IPv6 multicast address ff02::1 is kept even when the interface down). When
bond set the slave up, ipv6_mc_up() was not called due to commit c2edacf80e
("bonding / ipv6: no addrconf for slaves separately from master").
This is not an issue before we adding the lladdr target feature for bonding,
as the mac multicast address will be added back when bond interface up and
join group ff02::1.
But after adding lladdr target feature for bonding. When user set a lladdr
target, the unsolicited NA message with all-nodes multicast dest will be
dropped as the slave interface never add 33:33:00:00:00:01 back.
Fix this by calling ipv6_mc_up() to add 33:33:00:00:00:01 back when
the slave interface up.
Reported-by: LiLiang <liali@redhat.com>
Fixes: 5e1eeef69c ("bonding: NS target should accept link local address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ns_ip6_target was set, the ipv6_dev_get_saddr() will be called to get
available source address and send IPv6 neighbor solicit message.
If the target is global address, ipv6_dev_get_saddr() will get any
available src address. But if the target is link local address,
ipv6_dev_get_saddr() will only get available address from our interface,
i.e. the corresponding bond interface.
But before bond interface up, all the address is tentative, while
ipv6_dev_get_saddr() will ignore tentative address. This makes we can't
find available link local src address, then bond_ns_send() will not be
called and no NS message was sent. Finally bond interface will keep in
down state.
Fix this by sending NS with unspecified address if there is no available
source address.
Reported-by: LiLiang <liali@redhat.com>
Fixes: 5e1eeef69c ("bonding: NS target should accept link local address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tag (immutable branch) with v6.0-rc1 + the (acpi/x86) backlight
detect refactor work. For merging into the acpi, drm-* and pdx86
subsystems.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmMVsogUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yy6wgAlig+7hkq940L62lTpj0g2gNQv8zc
HCsMpnU7dnJcZYaEvIjouZhf33ZbN52c0fQq2JWjt7fFX04LLyIiyrJ26Lc293JR
++yXpJcVoewRGqApy/P3Z05TKUCLll5bexvK4t8isnhOtEXD/nDPWKTLIV2Kd1DK
nLY4KgRznXZ85RhYheUEdidZ7Lwlzt1JVBMq7tpnzu3nVdDExyZmqlqCUITcLynu
ysuASQGr0D2i+1vb9eifHIA3xsQO0S37Bv62aBMBKxB6B8Fz1DYr8VA2YvoT82Hv
IFT0hzCCZ/63Ljga05O78TwraxAQX0RvZWqjqGgnZg6fIBh2hxUiqeQY6g==
=SA1R
-----END PGP SIGNATURE-----
Merge tag 'backlight-detect-refactor-1' into review-hans
Immutable backlight-detect-refactor branch between acpi, drm-* and pdx86
Tag (immutable branch) with v6.0-rc1 + the (acpi/x86) backlight
detect refactor work. For merging into the acpi, drm-* and pdx86
subsystems.
During the iteration of for_each_child_of_node(), we need to call
of_node_put() for the old references stored in to 'ch_def' and 'ch_a'
as their refcounters have been increased in last iteration.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220716074344.540049-1-windhl@126.com
Call of_node_put() for the reference 'gparent' escaped out of the
previous for_each_child_of_node() as it has increased the refcount.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220716073111.539739-1-windhl@126.com
Call of_node_put() for the reference 'parent' returned by
of_get_parent() which has increased the refcount.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220716070758.539434-1-windhl@126.com
In probe_one_macio(), call of_node_put() for the refernece 'node'
escaped out of the for_each_node_by_name() which has increased its
refcount. While the 'node' will finally escaped into a global reference,
we should still call of_node_put() in fail path which will stop global
reference creation.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220716065412.539153-1-windhl@126.com
In pcibios_alloc_controller(), 'phb' is allocated and escaped into
global 'hose_list'. So we should call of_node_get() when a new reference
created into 'phb->dn'. And when phb is freed, we should call
of_node_put() on it.
NOTE: This function is called in the iteration of for_each_xx in
chrp_find_bridges() and pSeries_discover_phbs(). If there is no
of_node_get(), the object may be prematurely freed.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220702022936.266146-1-windhl@126.com
In these driver init functions, there are two kinds of errors:
(1) missing of_put_node() for of_find_compatible_node()'s returned
pointer (refcount incremented) in fail path or when it is not
used anymore.
(2) missing of_put_node() for 'for_each_xxx' loop's break
Signed-off-by: Liang He <windhl@126.com>
[mpe: Use out_put_xxx goto label naming]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220620132553.4073863-1-windhl@126.com
In fsl_pci_assign_primary(), we should remove the of_node_put()
when breaking out of the for_each_matching_node() as the 'np'
is escaped out by global 'fsl_pci_primary'.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220720124557.1256243-1-windhl@126.com
for_each_node_by_type() will automatically increase and decrease
the refcount during the iteration. However, there is a reference
escaped into global 'fsl_pci_primary' and we need to handle it.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701140119.245435-1-windhl@126.com
In ppc47x_init_irq(), we need to call of_node_put() when there is
a break during the iteration of for_each_node_with_property() which
will automatically increase and decrease the refcount.
Signed-off-by: Liang He <windhl@126.com>
[mpe: mpic_alloc() takes its own reference]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701133126.243102-1-windhl@126.com
In pci_add_device_node_info(), use of_node_put() to drop the reference
to 'parent' returned by of_get_parent() to keep refcount balance.
Fixes: cca87d303c ("powerpc/pci: Refactor pci_dn")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20220701131750.240170-1-windhl@126.com
In pseries_cpuhp_cache_use_count() and pseries_cpuhp_detach_nodes(),
we need carefully hold the reference returned by
of_find_next_cache_node() and use it to call of_node_put() to keep
refcount balance.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220621111701.4082889-1-windhl@126.com
In mpc832x_spi_init(), hold the reference returned by
of_find_compatible_node() and use it to call of_node_put() for refcount
balance.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220621080932.4081935-1-windhl@126.com
In mpc5121_clk_provide_migration_support(), hold the reference returned
by of_find_compatible_node() and use it to call of_node_put() for refcount
balance.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220621080349.4081689-1-windhl@126.com
In fsl_setup_msi_irqs(), use of_node_put() to drop the reference
returned by of_parse_phandle().
Fixes: 895d603f94 ("powerpc/fsl_msi: add support for the fsl, msi property in PCI nodes")
Co-authored-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220704145233.278539-1-windhl@126.com
Add of_node_put() in various paths to drop references once they are no
longer needed.
Signed-off-by: Liang He <windhl@126.com>
[mpe: Rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220620130221.4073228-1-windhl@126.com
In ibmebus_match_path(), use of_node_put() to drop the reference
returned by of_find_node_by_path() before testing for equality of the
pointers.
Signed-off-by: Liang He <windhl@126.com>
[mpe: Rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220619074016.4068105-1-windhl@126.com
In cell_iommu_init_disabled(), hold the reference returned by
of_find_node_by_name() and use it to call of_node_put() for reference
balance.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701144949.252364-2-windhl@126.com
There are several bugs as following:
(1) In cbe_get_be_node(), hold the reference returned by of_find_xxx and
of_get_xxx OF APIs and use it to call of_node_put().
(2) In cbe_fill_regs_map(), same as above.
(3) In cbe_regs_init(), during the iteration of for_each_node_by_type(),
the refcount of 'cpu' will be automatically increased and decreased.
However, there is a reference escaped out into 'map->cpu_node' and
it should be properly handled.
Signed-off-by: Liang He <windhl@126.com>
[mpe: Drop references before pointer equality test in cbe_get_be_node()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701144949.252364-1-windhl@126.com
Use of_node_put() for of_find_node_by_path() and
of_find_node_by_phandle() to keep refcount balance.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220619072335.4067728-1-windhl@126.com
In find_legacy_serial_ports(), of_find_node_by_path() will return a node
pointer with refcount incremented. The reference should be dropped with
of_node_put() when it is not used anymore.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220619070811.4067215-1-windhl@126.com
In update_events_in_group(), of_find_node_by_phandle() will return
a node pointer with refcount incremented. The reference should be
dropped with of_node_put() in the failure path or when it is not used
anymore.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20220618071353.4059000-1-windhl@126.com
