Casper Andersson says:
====================
net: sparx5: add mrouter support
This series adds support for multicast router ports to SparX5. To manage
mrouter ports the driver must keep track of mdb entries. When adding an
mrouter port the driver has to iterate over all mdb entries and modify
them accordingly.
v2:
- add bailout in free_mdb
- re-arrange mdb struct to avoid holes
- change devm_kzalloc -> kzalloc
- change GFP_ATOMIC -> GFP_KERNEL
- fix spelling
====================
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All multicast should be forwarded to mrouter ports. Mrouter ports must
therefore be part of all active multicast groups, and override flooding
from being disabled.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep track of all mdb entries in software for easy access.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IP multicast must sometimes be discriminated from non-IP multicast,
e.g. when determining the forwarding behavior of a given group in the
presence of multicast router ports on an offloaded bridge. Therefore,
provide helpers to identify these groups.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We had historically not checked that genlmsghdr.reserved
is 0 on input which prevents us from using those precious
bytes in the future.
One use case would be to extend the cmd field, which is
currently just 8 bits wide and 256 is not a lot of commands
for some core families.
To make sure that new families do the right thing by default
put the onus of opting out of validation on existing families.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel)
Signed-off-by: David S. Miller <davem@davemloft.net>
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family. Hence move its compatible value to the R-Car Gen4 section.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220824094327.33685-4-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a cross dependency between KVM and VFIO when using
s390 vfio_pci_zdev extensions for PCI passthrough
To be able to keep both subsystem modular we add a registering
hook inside the S390 core code.
This fixes a build problem when VFIO is built-in and KVM is built
as a module.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Fixes: 09340b2fca ("KVM: s390: pci: add routines to start/stop interpretive execution")
Cc: <stable@vger.kernel.org>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20220819122945.9309-1-pmorel@linux.ibm.com
Message-Id: <20220819122945.9309-1-pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Keep regulators as individual devices. There is no need to have them
under simple bus. This will throw compilation warnings like:
- unnecessary #address-cells/#size-cells without "ranges" or child "reg"
property.
- node has a unit name, but no reg or ranges property.
While at it move it down a bit in the file to keep entries sorted
alphabetically.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-10-claudiu.beznea@microchip.com
Add basic support for pcb8290. It has 2 lan8814 phys(each phy is a
quad-port) on the external MDIO bus and no SFP ports.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220825065135.1075049-1-horatiu.vultur@microchip.com
On the Radxa ROCK3 Model A the I2C adapters related to the MIPI DSI
connector and the M.2/NGFF connector use the non-default pins.
Specify the correct pinctrl but leave the adapters disabled (as
they are supposed to be activated by overlays that describe the
external hardware).
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220712133204.2524942-3-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Radxa ROCK3 Model A features a voltage regulator that provides
a 3V3 supply to the MIPI DSI connector. Add this regulator to the
device tree of the board.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220712133204.2524942-2-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Radxa ROCK3 Model A features a voltage regulator that provides
a 3V3 supply to the MIPI CSI connector. Add this regulator to the
device tree of the board.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220712133204.2524942-1-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The sequence of sections is a bit confusing here:
* we list the mux locking scheme for existing drivers before introducing
what mux locking schemes are
* we list the caveats for each locking scheme (which are tricky) before
the example of the simple use case
Restructure it entirely with the following logic:
* Intro ("I2C muxes and complex topologies")
* Locking
- mux-locked
- example
- caveats
- parent-locked
- example
- caveats
* Complex examples
* Mux type of existing device drivers
While there, also apply some other improvements:
* convert the caveat list from a table (with only one column carrying
content) to a bullet list.
* add a small introductory text to bridge the gap from listing the use
cases to telling about the hardware components to handle them and then
the device drivers that implement those.
* make empty lines usage more uniform
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
"Etc" here was never meant to be a heading, it became one while converting
to ReST.
It would be easy to just convert it to plain text, but rather remove it and
add an introductory text before the list that conveys the same meaning but
with a better reading flow.
Fixes: ccf988b66d ("docs: i2c: convert to ReST and add to driver-api bookset")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
"intension" should have probably been "intention", however "intent" seems
even better.
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
While working on a GRUB patch to support PCI-serial, a number of
cleanups were suggested that apply to the code I took inspiration from.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/YwdeyCEtW+wa+QhH@worktop.programming.kicks-ass.net
Move display watermark related members under drm_i915_private display
sub-struct.
It's a bit arbitrary when to define a named struct for grouping, but
clearly intel_wm is big enough to warrant a separate definition.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b991dd25f8f539746c475d417691e0816ff6b24a.1661346845.git.jani.nikula@intel.com
The rc code is 0 at the error path "status & CC2520_STATUS_TX_UNDERFLOW".
Assign rc code with '-EINVAL' at this error path to fix it.
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Link: https://lore.kernel.org/r/20220829071259.18330-1-liqiong@nfschina.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Upon reception, a packet must be categorized, either it's destination is
the host, or it is another host. A packet with no destination addressing
fields may be valid in two situations:
- the packet has no source field: only ACKs are built like that, we
consider the host as the destination.
- the packet has a valid source field: it is directed to the PAN
coordinator, as for know we don't have this information we consider we
are not the PAN coordinator.
There was likely a copy/paste error made during a previous cleanup
because the if clause is now containing exactly the same condition as in
the switch case, which can never be true. In the past the destination
address was used in the switch and the source address was used in the
if, which matches what the spec says.
Cc: stable@vger.kernel.org
Fixes: ae531b9475 ("ieee802154: use ieee802154_addr instead of *_sa variants")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220826142954.254853-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
- Remove superfluous interrupt-names from imx8mq-tqma8mq RTC device to
silence dtbs_check warning.
- A few Verdin board fixes on CAN clock frequency, mcp251xfd interrupt,
atmel_mxt_ts reset polarity and USB PHY.
- Remove duplicated node and fix spi-flash compatible for
imx6qdl-kontron-samx6i.
- A couple of i.MX8M Plus DHCOM fixes from Marek Vasut on ECSPI1 pinmux
and I2C5 GPIO assignment.
- A couple of Venice fixes on SAI2 pin settings and phy-mode.
- Drop in-band autoneg for 2500base-x phy-mode on ls1028a-qds-65bb
board.
- Revert the power device name setting change from imx8m-blk-ctrl
driver, as it causes issue for sysfs cleanup path.
- Fix gpcv2 driver to assert reset before ungating clock.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmMEijkUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6LWQf/S5xgsb6ICveoaBrFyBvZv2dZvyqW
eAoeQUZDdQjO3mkUECOqjTYcCeAgnFcIb7vfbSx8VNTz+QCDixaziz1P4Tjjtj+j
TMtxo1CIeEcMkOnyOMUqZEyCLi+vAdnZUASzjCzuDC+6duAJXkhn1/cjRdaTotlA
yKJMZeJjmI1ChfTrSdiYv/IFmW+5s/ic8AGEiA1ngZiztftfrY1NDPhhg4RsWjds
borwErGj5wemPKxsXGU40AJmYQ3vHvZZ2LxG9vnxkrcKG2E6TWijKG3lYakvZTci
ny5c5YgHByGfZN8Ck3+PlVYHXk0asrRaspgaQgTlGraWsNFjFbfCitPQ8A==
=O/u2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PXZt
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.0:
- Remove superfluous interrupt-names from imx8mq-tqma8mq RTC device to
silence dtbs_check warning.
- A few Verdin board fixes on CAN clock frequency, mcp251xfd interrupt,
atmel_mxt_ts reset polarity and USB PHY.
- Remove duplicated node and fix spi-flash compatible for
imx6qdl-kontron-samx6i.
- A couple of i.MX8M Plus DHCOM fixes from Marek Vasut on ECSPI1 pinmux
and I2C5 GPIO assignment.
- A couple of Venice fixes on SAI2 pin settings and phy-mode.
- Drop in-band autoneg for 2500base-x phy-mode on ls1028a-qds-65bb
board.
- Revert the power device name setting change from imx8m-blk-ctrl
driver, as it causes issue for sysfs cleanup path.
- Fix gpcv2 driver to assert reset before ungating clock.
* tag 'imx-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity
arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity
arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
arm64: dts: imx8mm-venice-gw7901: fix port/phy validation
arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
soc: imx: gpcv2: Assert reset before ungating clock
arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x
ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatible
ARM: dts: imx6qdl-kontron-samx6i: remove duplicated node
ARM: dts: imx6qdl-vicut1.dtsi: Fix node name backlight_led
arm64: dts: imx8mq-tqma8mq: Remove superfluous interrupt-names
arm64: dts: imx8mp: Adjust ECSPI1 pinmux on i.MX8M Plus DHCOM
arm64: dts: imx8mp-venice-gw74xx: fix sai2 pin settings
arm64: dts: imx8mm-verdin: use level interrupt for mcp251xfd
arm64: dts: imx8mm-verdin: update CAN clock to 40MHz
Revert "soc: imx: imx8m-blk-ctrl: set power device name"
Link: https://lore.kernel.org/r/20220823092631.GV149610@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 788961462f ("ARM: psci: cpuidle: Enable PSCI CPUidle
driver") the generic ARM cpuidle driver probe no longer worked on
ARM64. It was however left enabled with the driver failing to probe
successfully. However the commit 51280acad8 ("cpuidle: cpuidle-arm:
remove arm64 support") removed the Kconfig option so that it is no
longer enabled for arm64 platforms.
Drop the disabled/unavailable ARM_CPUIDLE from the defconfig.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220822121604.2213778-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two updates for the MAINTAINERS file from Conor Dooley.
* polarfire/fixes:
MAINTAINERS: add the Polarfire SoC's i2c driver
MAINTAINERS: add PolarFire SoC dt bindings
According to https://www.kernel.org/doc/html/latest/timers/no_hz.html,
CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newer
kernels, so let's reflect that in the 32-bit ARM defconfigs.
Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220825162034.5901-1-newbie13xd@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
