In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be
copied from user, then go through `fb_set_var()` and
`info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`.
Along the path, `var->pixclock` won't be modified. This function checks
whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is
zero, there will be a divide by zero error. So, it is necessary to check
whether denominator is zero to avoid crash. As this bug is found by
Syzkaller, logs are listed below.
divide error in pm2fb_check_var
Call Trace:
<TASK>
fb_set_var+0x367/0xeb0 drivers/video/fbdev/core/fbmem.c:1015
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Using the BSPEC algorithm add addition HDMI pixel clocks to the existing
table.
v2: remove 297000 unused entry
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Taylor, Clinton A <clinton.a.taylor@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
[mattrope: Fixed minor whitepsace issue flagged by checkpatch]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801234856.2832317-1-clinton.a.taylor@intel.com
It was not possible to create 1-tuple flow director
rule for IPv6 flow type. It was caused by incorrectly
checking for source IP address when validating user provided
destination IP address.
Fix this by changing ip6src to correct ip6dst address
in destination IP address validation for IPv6 flow type.
Fixes: efca91e89b ("i40e: Add flow director support for IPv6")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ixgbe_ptp_start_cyclecounter is intended to be called whenever the
cyclecounter parameters need to be changed.
Since commit a9763f3cb5 ("ixgbe: Update PTP to support X550EM_x
devices"), this function has cleared the SYSTIME registers and reset the
TSAUXC DISABLE_SYSTIME bit.
While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear
them during ixgbe_ptp_start_cyclecounter. This function may be called
during both reset and link status change. When link changes, the SYSTIME
counter is still operating normally, but the cyclecounter should be updated
to account for the possibly changed parameters.
Clearing SYSTIME when link changes causes the timecounter to jump because
the cycle counter now reads zero.
Extract the SYSTIME initialization out to a new function and call this
during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids
an unnecessary reset of the current time.
This also restores the original SYSTIME clearing that occurred during
ixgbe_ptp_reset before the commit above.
Reported-by: Steve Payne <spayne@aurora.tech>
Reported-by: Ilya Evenbach <ievenbach@aurora.tech>
Fixes: a9763f3cb5 ("ixgbe: Update PTP to support X550EM_x devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The parent field in struct acpi_device is, in fact, redundant,
because the dev.parent field in it effectively points to the same
object and it is used by the driver core.
Accordingly, the parent field can be dropped from struct acpi_device
and for this purpose define acpi_dev_parent() to retrieve a parent
struct acpi_device pointer from the dev.parent field in struct
acpi_device. Next, update all of the users of the parent field
in struct acpi_device to use acpi_dev_parent() instead of it and
drop it.
While at it, drop the ACPI_IS_ROOT_DEVICE() macro that is only used
in one place in a confusing way.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
new API and remove the old OF code (Daniel Lezcano)
- Fix return value to -ENODEV when searching for a specific thermal
zone which does not exist (Daniel Lezcano)
- Fix the return value inspection in of_thermal_zone_find() (Dan
Carpenter)
- Fix kernel panic when kasan is enabled as it detects an use after
free when unregistering a thermal zone (Daniel Lezcano)
- Move the set_trip ops inside the therma sysfs code (Daniel Lezcano)
- Remove unnecessary error message as it is already showed in the
underlying function (Jiapeng Chong)
- Rework the monitoring path and move the locks upper in the call
stack to fix some potentials race windows (Daniel Lezcano)
- Fix lockdep_assert() warning introduced by the lock rework (Daniel
Lezcano)
- Revert the Mellanox 'hotter thermal zone' feature because it is
already handled in the thermal framework core code (Daniel Lezcano)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmMEyhwACgkQqDIjiipP
6E8+AAf/QFLCn1CzLsWCvHC+i4+CjoX/d/1ZhX24mZm17llBdSP5zGxlCVNCRAk/
xabT62WUbRsIzG0lCYAGUYXDUQf6qjs1QJ/fMZxtwoyHJA0yc3BtIlhxlnezpcA/
Dvfu0gu3NaZvf/yIl+PWrEJP6ZXmPzpiiYdtCZIReB+L1XR0tSJ49bxP+QIaN5JH
EXOmO0Y0XLG9jGshUS4xJrej9QQcTvgpbLGy/QLS43sdmmXHOkfbjvl1i4CPFeo3
14ENCsGm5wXAS1UHDRluoasgPUXTlG809aVzeh6pBcHzWn/90K8XeNA+lCbL8k23
hiXrpYX2Xhgy1vibyB7DW1bzQYOYxQ==
=wF0H
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control changes for v6.1-rc1 from Daniel Lezcano:
"- Rework the device tree initialization, convert the drivers to the
new API and remove the old OF code (Daniel Lezcano)
- Fix return value to -ENODEV when searching for a specific thermal
zone which does not exist (Daniel Lezcano)
- Fix the return value inspection in of_thermal_zone_find() (Dan
Carpenter)
- Fix kernel panic when KASAN is enabled as it detects use after
free when unregistering a thermal zone (Daniel Lezcano)
- Move the set_trip ops inside the therma sysfs code (Daniel Lezcano)
- Remove unnecessary error message as it is already showed in the
underlying function (Jiapeng Chong)
- Rework the monitoring path and move the locks upper in the call
stack to fix some potentials race windows (Daniel Lezcano)
- Fix lockdep_assert() warning introduced by the lock rework (Daniel
Lezcano)
- Revert the Mellanox 'hotter thermal zone' feature because it is
already handled in the thermal framework core code (Daniel Lezcano)"
* tag 'thermal-v6.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (46 commits)
Revert "mlxsw: core: Add the hottest thermal zone detection"
thermal/core: Fix lockdep_assert() warning
thermal/core: Move the mutex inside the thermal_zone_device_update() function
thermal/core: Move the thermal zone lock out of the governors
thermal/governors: Group the thermal zone lock inside the throttle function
thermal/core: Rework the monitoring a bit
thermal/core: Rearm the monitoring only one time
thermal/drivers/qcom/spmi-adc-tm5: Remove unnecessary print function dev_err()
thermal/of: Remove old OF code
thermal/core: Move set_trip_temp ops to the sysfs code
thermal/drivers/samsung: Switch to new of thermal API
regulator/drivers/max8976: Switch to new of thermal API
Input: sun4i-ts - switch to new of thermal API
iio/drivers/sun4i_gpadc: Switch to new of thermal API
hwmon/drivers/core: Switch to new of thermal API
hwmon: pm_bus: core: Switch to new of thermal API
ata/drivers/ahci_imx: Switch to new of thermal API
thermal/drivers/ti-soc: Switch to new of API
thermal/drivers/hisilicon: Switch to new of API
thermal/drivers/maxim: Switch to new of API
...
- Fix build warning for when MODULES and FTRACE_WITH_DIRECT_CALLS are not
set. A warning happens with ops_references_rec() defined but not used.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYwTkGhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtUTAP4tOmf0I0c+GsWTzpecvv7fa+9rxmZa
SfBuoPqzC/TBqAEArqaf91+57aehCrJC3X5HaE7OJisW9nd2Epnvrpxk4QY=
=0yZV
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
- Fix build warning for when MODULES and FTRACE_WITH_DIRECT_CALLS are
not set. A warning happens with ops_references_rec() defined but not
used.
* tag 'trace-v6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix build warning for ops_references_rec() not used
A race condition still exists when removing and re-creating md devices
in test cases. However, it is only seen on some setups.
The race condition was tracked down to a reference still being held
to the kobject by the rdev in the md_rdev_misc_wq which will be released
in rdev_delayed_delete().
md_alloc() waits for previous deletions by waiting on the md_misc_wq,
but the md_rdev_misc_wq may still be holding a reference to a recently
removed device.
To fix this, also flush the md_rdev_misc_wq in md_alloc().
Signed-off-by: David Sloan <david.sloan@eideticom.com>
[logang@deltatee.com: rewrote commit message]
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Fix the following sparse warning:
drivers/md/raid10.c:2647:60: sparse: sparse: incorrect type in argument 5 (different base types) @@ expected restricted blk_opf_t [usertype] opf @@ got int rw @@
This patch does not change any functionality since REQ_OP_READ = READ = 0
and since REQ_OP_WRITE = WRITE = 1.
Cc: Rong A Chen <rong.a.chen@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Fixes: 4ce4c73f66 ("md/core: Combine two sync_page_io() arguments")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Song Liu <song@kernel.org>
Since commit:
cifs: alloc_path_with_tree_prefix: do not append sep. if the path is empty
alloc_path_with_tree_prefix() function was no longer including the
trailing separator when @path is empty, although @out_len was still
assuming a path separator thus adding an extra byte to the final
filename.
This has caused mount issues in some Synology servers due to the extra
NULL byte in filenames when sending SMB2_CREATE requests with
SMB2_FLAGS_DFS_OPERATIONS set.
Fix this by checking if @path is not empty and then add extra byte for
separator. Also, do not include any trailing NULL bytes in filename
as MS-SMB2 requires it to be 8-byte aligned and not NULL terminated.
Cc: stable@vger.kernel.org
Fixes: 7eacba3b00 ("cifs: alloc_path_with_tree_prefix: do not append sep. if the path is empty")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull dmi update from Jean Delvare.
Tiny cleanup.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Use the proper accessor for the version field
Merge series from Chunxu Li <chunxu.li@mediatek.com>:
Add SOF related field.
1. Add a property "mediatek,adsp", Only when adsp phandle could be retrieved,
from DTS, the SOF related part of machine driver is executed.
2. Add a property "mediatek,dai-link" to support dai-links could be specified
from DTS
I've been reviewing the patches related to PCI Endpoint Subsystem for some
time. So I'd like to add myself as the reviewer to get immediate attention
to the patches.
Link: https://lore.kernel.org/r/20220819020817.197844-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Allow to configure port split options using the devlink port split
interface. Support port splitting only for port 0, as the FW has
a predefined set of available port split options for the whole device.
Add ice_devlink_port_options_print() function to print the table with
all available FW port split options. It will be printed after each port
split and unsplit command.
Add documentation for devlink port split interface usage for the ice
driver.
Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_nvm_write_activate function is used to issue AdminQ command
0x0707 which sends a request to firmware to activate a flash bank. For
basic operations, this command takes an 8bit flag value which defines
the flags to control the activation process. There are some additional
flags that are stored in a second 8bit flag field.
We can simplify the interface by using a u16 cmd_flags variable. Split
this over the two bytes of flag storage in the structure.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement support for Get/Set Port Options admin queue commands
(0x06EA/0x06EB). These firmware commands allow the driver to change port
specific options and will be used in the next patch.
Co-developed-by: Lev Faerman <lev.faerman@intel.com>
Signed-off-by: Lev Faerman <lev.faerman@intel.com>
Co-developed-by: Damian Milosek <damian.milosek@intel.com>
Signed-off-by: Damian Milosek <damian.milosek@intel.com>
Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add support for parsing TTL and ToS (Hop Limit and Traffic Class) tc fields
and matching on those fields in filters. Incomplete part of implementation
was already in place (getting enc_ip and enc_tos from flow_match_ip and
writing them to filter header).
Note: matching on ipv6 ip_ttl, enc_ttl and enc_tos is currently not
supported by the DDP package.
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
cpumask related files are listed under the BITMAP API section, so the
file with tests for cpumask should be added to that list.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The cpumask test suite doesn't follow the KUnit style guidelines, as
laid out in Documentation/dev-tools/kunit/style.rst. The file is
renamed to lib/cpumask_kunit.c to clearly distinguish it from other,
non-KUnit, tests.
Link: https://lore.kernel.org/lkml/346cb279-8e75-24b0-7d12-9803f2b41c73@riseup.net/
Suggested-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Since cpumask_first() on the cpu_possible_mask must return at most
nr_cpu_ids - 1 for a valid result, cpumask_last() cannot return anything
larger than this value. As test_cpumask_weight() also verifies that the
total weight of cpu_possible_mask must equal nr_cpu_ids, the last bit
set in this mask must be at nr_cpu_ids - 1.
Fixes: c41e8866c2 ("lib/test: introduce cpumask KUnit test suite")
Link: https://lore.kernel.org/lkml/346cb279-8e75-24b0-7d12-9803f2b41c73@riseup.net/
Reported-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
When the number of CPUs that can possibly be brought online is known at
boot time, e.g. when HOTPLUG is disabled, nr_cpu_ids may be smaller than
NR_CPUS. In that case, cpu_possible_mask would not be completely filled,
and cpumask_full(cpu_possible_mask) can return false for valid system
configurations.
Without this test, cpu_possible_mask contents are still constrained by
a check on cpumask_weight(), as well as tests in test_cpumask_first(),
test_cpumask_last(), test_cpumask_next(), and test_cpumask_iterators().
Fixes: c41e8866c2 ("lib/test: introduce cpumask KUnit test suite")
Link: https://lore.kernel.org/lkml/346cb279-8e75-24b0-7d12-9803f2b41c73@riseup.net/
Reported-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
There are opcodes that need ->async_data only in some cases and
allocation it unconditionally may hurt performance. Add an option to
opdef to make move the allocation part from the core io_uring to opcode
specific code.
Note, we can't just set opdef->async_size to zero because there are
other helpers that rely on it, e.g. io_alloc_async_data().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9dc62be9e88dd0ed63c48365340e8922d2498293.1661342812.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, there is no ordering between notification CQEs and
completions of the send flushing it, this quite complicates the
userspace, especially since we don't flush notification when the
send(+flush) request fails, i.e. there will be only one CQE. What we
can do is to make sure that notification completions come only after
sends.
The easiest way to achieve this is to not try to complete a notification
inline from io_sendzc() but defer it to task_work, considering that
io-wq sendzc is disallowed CQEs will be naturally ordered because
task_works will only be executed after we're done with submission and so
inline completion.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/cddfd1c2bf91f22b9fe08e13b7dffdd8f858a151.1661342812.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Failed requests should be marked with req_set_fail(), so links and cqe
skipping work correctly, which is missing in io_sendzc(). Note,
io_sendzc() return IOU_OK on failure, so the core code won't do the
cleanup for us.
Fixes: 06a5464be8 ("io_uring: wire send zc request type")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e47d46fda9db30154ce66a549bb0d3380b780520.1661342812.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return the value from rtrs_clt_rdma_cq_direct() directly instead of
storing it in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20220824075213.221397-1-ye.xingchen@zte.com.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To unify kmalloc functions in later patch, introduce common alloc/free
functions that does not have tracepoint.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
There is not much benefit for serving large objects in kmalloc().
Let's pass large requests to page allocator like SLUB for better
maintenance of common code.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Now that kmalloc_large() and kmalloc_large_node() do mostly same job,
make kmalloc_large() wrapper of kmalloc_large_node_notrace().
In the meantime, add missing flag fix code in
kmalloc_large_node_notrace().
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Now that kmalloc_large_node() is in common code, pass large requests
to page allocator in kmalloc_node() using kmalloc_large_node().
One problem is that currently there is no tracepoint in
kmalloc_large_node(). Instead of simply putting tracepoint in it,
use kmalloc_large_node{,_notrace} depending on its caller to show
useful address for both inlined kmalloc_node() and
__kmalloc_node_track_caller() when large objects are allocated.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
In later patch SLAB will also pass requests larger than order-1 page
to page allocator. Move kmalloc_large_node() to slab_common.c.
Fold kmalloc_large_node_hook() into kmalloc_large_node() as there is
no other caller.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
There is no caller of kmalloc_order_trace() except kmalloc_large().
Fold it into kmalloc_large() and remove kmalloc_order{,_trace}().
Also add tracepoint in kmalloc_large() that was previously
in kmalloc_order_trace().
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
__kmalloc(), __kmalloc_node(), __kmalloc_node_track_caller()
mostly do same job. Factor out common code into __do_kmalloc_node().
Note that this patch also fixes missing kasan_kmalloc() in SLUB's
__kmalloc_node_track_caller().
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Now that slab_alloc_node() is available for SLAB when CONFIG_NUMA=n,
remove CONFIG_NUMA ifdefs for common kmalloc functions.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Make slab_alloc_node() available even when CONFIG_NUMA=n and
make slab_alloc() wrapper of slab_alloc_node().
This is necessary for further cleanup.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
To implement slab_alloc_node() independent of NUMA configuration,
move NUMA fallback/alternate allocation code into __do_cache_alloc().
One functional change here is not to check availability of node
when allocating from local node.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Host Turbo operates at efficient frequency when GT is not idle unless
the user or workload has forced it to a higher level. Replicate the same
behavior in SLPC by allowing the algorithm to use efficient frequency.
We had disabled it during boot due to concerns that it might break
kernel ABI for min frequency. However, this is not the case since
SLPC will still abide by the (min,max) range limits.
With this change, min freq will be at efficient frequency level at init
instead of fused min (RPn). If user chooses to reduce min freq below the
efficient freq, we will turn off usage of efficient frequency and honor
the user request. When a higher value is written, it will get toggled
back again.
The patch also corrects the register which needs to be read for obtaining
the correct efficient frequency for Gen9+.
We see much better perf numbers with benchmarks like glmark2 with
efficient frequency usage enabled as expected.
v2: Address review comments (Rodrigo)
v3: with efficient frequency being dynamic, it is possible that the req
frequency may go beyond max freq. This will cause SLPC selftests to fail.
Add a FIXME there to start the test with [RPn, RP0] instead and restore
it afterwards.
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/5468
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820010832.15350-1-vinay.belgaumkar@intel.com
container_of is never null, so this null check is
unnecessary.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220824080350.221614-1-chi.minghao@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adhere to Linux kernel coding style.
Reported by checkpatch:
CHECK: multiple assignments should be avoided
Signed-off-by: Christopher Carbone <chris.m.carbone@gmail.com>
Link: https://lore.kernel.org/r/YwVBHM3z0QExtuXr@valhalla
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SOF related field.
1. Add a property "mediatek,adsp", Only when adsp phandle could be
retrieved, from DTS, the SOF related part of machine driver is executed.
2. Add a property "mediatek,dai-link" to support dai-links could be
specified from DTS
Signed-off-by: chunxu.li <chunxu.li@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220824122319.23918-3-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SOF related field.
1. Add a property "mediatek,adsp", Only when adsp phandle could be
retrieved, from DTS, the SOF related part of machine driver is executed.
2. Add a property "mediatek,dai-link" to support dai-links could be
specified from DTS
Signed-off-by: chunxu.li <chunxu.li@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220824122319.23918-2-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
