Clean up the interconnect-initialisation helper by increasing
indentation of (or merging) continuation lines and adding brackets
around multi-line blocks in order to improve readability.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220805074500.21469-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a temporary variable to the interconnect-initialisation helper to
avoid parsing and decoding the 'maximum-speed' devicetree property
twice.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220805074500.21469-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously usb_decode_ctrl() only decodes standard control requests, but
it was used for non-standard requests also. If it's non-standard or
unknown standard bRequest, print the Setup data values.
Fixes: af32423a2d ("usb: dwc3: trace: decode ctrl request")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/8d6a30f2f2f953eff833a5bc5aac640a4cc2fc9f.1658971571.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having the Start of Frame Number in the trace data is useful for debugging.
This patch adds the (micro)frame number in which the last packet of the
TRB's buffer was transmitted or received to the trace output.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220720215113.1058313-2-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Printing the event parameters in decimal is not useful.
Print them in hex and make it more practical.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220720215113.1058313-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions stop_active_transfers and ep_disable are both calling
remove_requests. This functions in both cases will giveback the requests
with status ESHUTDOWN, which also represents an physical disconnection.
For ep_disable this is not true. This patch adds the status parameter to
remove_requests and sets the status to ECONNRESET on ep_disable.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220720213523.1055897-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove USB EHCI host controller reset sequence from NPCM7XX USB EHCI
host probe function because it is done in the NPCM reset driver.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/20220718181842.61040-2-tmaimon77@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit d6f35446d0.
It is coming in through Andrew's tree instead, and for some reason we
have different versions. I trust the version from Andrew more as the
original offending commit came through his tree.
Fixes: d6f35446d0 ("binder_alloc: Add missing mmap_lock calls when using the VMA")
Cc: stable <stable@kernel.org>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20220819184027.7b3fda3e@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that spi pl022 binding only accept "sspclk" as clock name, versatile
platform with "SSPCLK" clock name start raising dtbs_check warnings.
Make necessary changes to update this property in order to make it
compliant with binding.
clock-names:0: 'sspclk' was expected
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Link: https://lore.kernel.org/r/20220312113853.63446-4-singh.kuldeep87k@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Now that spi pl022 binding only accept "sspclk" as clock name, realview
platforms with "SSPCLK" clock name start raising dtbs_check warnings.
Make necessary changes to update this property in order to make it
compliant with binding.
clock-names:0: 'sspclk' was expected
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Link: https://lore.kernel.org/r/20220312113853.63446-3-singh.kuldeep87k@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As per spi pl022 binding, SPI clock name is "sspclk" and not "spiclk".
Fix it.
Also update ssp node name to enable spi bindings check.
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Link: https://lore.kernel.org/r/20220312113853.63446-2-singh.kuldeep87k@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This happens when @udev->reset_resume is set to true, when usb resume,
the flow as below:
- hub_resume
- usb_disable_interface
- usb_disable_endpoint
- usb_hcd_disable_endpoint
- xhci_endpoint_disable // it set @ep->hcpriv to NULL
Then when reset usb device, it will drop allocated endpoints,
the flow as below:
- usb_reset_and_verify_device
- usb_hcd_alloc_bandwidth
- xhci_mtk_drop_ep
but @ep->hcpriv is already set to NULL, the bandwidth will be not
released anymore.
Due to the added endponts are stored in hash table, we can drop the check
of @ep->hcpriv.
Fixes: 4ce186665e ("usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint")
Cc: stable <stable@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220819080556.32215-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently uses the worst case byte budgets on FS/LS bus bandwidth,
for example, for an isochronos IN endpoint with 192 bytes budget, it
will consume the whole 5 uframes(188 * 5) while the actual FS bus
budget should be just 192 bytes. It cause that many usb audio headsets
with 3 interfaces (audio input, audio output, and HID) cannot be
configured.
To improve it, changes to use "approximate" best case budget for FS/LS
bandwidth management. For the same endpoint from the above example,
the approximate best case budget is now reduced to (188 * 2) bytes.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220819080556.32215-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable is initialized but it is only used after its assignment.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Message-Id: <20220819021535.483702-1-kunyu@nfschina.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The variable is initialized but it is only used after its assignment.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Message-Id: <20220819022804.483914-1-kunyu@nfschina.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following BUG was reported:
traps: Missing ENDBR: andw_ax_dx+0x0/0x10 [kvm]
------------[ cut here ]------------
kernel BUG at arch/x86/kernel/traps.c:253!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<TASK>
asm_exc_control_protection+0x2b/0x30
RIP: 0010:andw_ax_dx+0x0/0x10 [kvm]
Code: c3 cc cc cc cc 0f 1f 44 00 00 66 0f 1f 00 48 19 d0 c3 cc cc cc
cc 0f 1f 40 00 f3 0f 1e fa 20 d0 c3 cc cc cc cc 0f 1f 44 00 00
<66> 0f 1f 00 66 21 d0 c3 cc cc cc cc 0f 1f 40 00 66 0f 1f 00 21
d0
? andb_al_dl+0x10/0x10 [kvm]
? fastop+0x5d/0xa0 [kvm]
x86_emulate_insn+0x822/0x1060 [kvm]
x86_emulate_instruction+0x46f/0x750 [kvm]
complete_emulated_mmio+0x216/0x2c0 [kvm]
kvm_arch_vcpu_ioctl_run+0x604/0x650 [kvm]
kvm_vcpu_ioctl+0x2f4/0x6b0 [kvm]
? wake_up_q+0xa0/0xa0
The BUG occurred because the ENDBR in the andw_ax_dx() fastop function
had been incorrectly "sealed" (converted to a NOP) by apply_ibt_endbr().
Objtool marked it to be sealed because KVM has no compile-time
references to the function. Instead KVM calculates its address at
runtime.
Prevent objtool from annotating fastop functions as sealable by creating
throwaway dummy compile-time references to the functions.
Fixes: 6649fa876d ("x86/ibt,kvm: Add ENDBR to fastops")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Debugged-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Message-Id: <0d4116f90e9d0c1b754bb90c585e6f0415a1c508.1660837839.git.jpoimboe@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SETCC_ALIGN and FOP_ALIGN are both 16. Remove the special casing for
FOP_SETCC() and just make it a normal fastop.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Message-Id: <7c13d94d1a775156f7e36eed30509b274a229140.1660837839.git.jpoimboe@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a macro which prevents a function from getting sealed if there are
no compile-time references to it.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Message-Id: <20220818213927.e44fmxkoq4yj6ybn@treble>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The motivation of this renaming is to make these variables and related
helper functions less mmu_notifier bound and can also be used for non
mmu_notifier based page invalidation. mmu_invalidate_* was chosen to
better describe the purpose of 'invalidating' a page that those
variables are used for.
- mmu_notifier_seq/range_start/range_end are renamed to
mmu_invalidate_seq/range_start/range_end.
- mmu_notifier_retry{_hva} helper functions are renamed to
mmu_invalidate_retry{_hva}.
- mmu_notifier_count is renamed to mmu_invalidate_in_progress to
avoid confusion with mn_active_invalidate_count.
- While here, also update kvm_inc/dec_notifier_count() to
kvm_mmu_invalidate_begin/end() to match the change for
mmu_notifier_count.
No functional change intended.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_INTERNAL_MEM_SLOTS better reflects the fact those slots are KVM
internally used (invisible to userspace) and avoids confusion to future
private slots that can have different meaning.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-2-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_PRIVATE_MEM_SLOTS defaults to zero, so it is not necessary to
define it in MIPS's asm/kvm_host.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invoke kvm_coalesced_mmio_init() from kvm_create_vm() now that allocating
and initializing coalesced MMIO objects is separate from registering any
associated devices. Moving coalesced MMIO cleans up the last oddity
where KVM does VM creation/initialization after kvm_create_vm(), and more
importantly after kvm_arch_post_init_vm() is called and the VM is added
to the global vm_list, i.e. after the VM is fully created as far as KVM
is concerned.
Originally, kvm_coalesced_mmio_init() was called by kvm_create_vm(), but
the original implementation was completely devoid of error handling.
Commit 6ce5a090a9 ("KVM: coalesced_mmio: fix kvm_coalesced_mmio_init()'s
error handling" fixed the various bugs, and in doing so rightly moved the
call to after kvm_create_vm() because kvm_coalesced_mmio_init() also
registered the coalesced MMIO device. Commit 2b3c246a68 ("KVM: Make
coalesced mmio use a device per zone") cleaned up that mess by having
each zone register a separate device, i.e. moved device registration to
its logical home in kvm_vm_ioctl_register_coalesced_mmio(). As a result,
kvm_coalesced_mmio_init() is now a "pure" initialization helper and can
be safely called from kvm_create_vm().
Opportunstically drop the #ifdef, KVM provides stubs for
kvm_coalesced_mmio_{init,free}() when CONFIG_KVM_MMIO=n (s390).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220816053937.2477106-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unconditionally get a reference to the /dev/kvm module when creating a VM
instead of using try_get_module(), which will fail if the module is in
the process of being forcefully unloaded. The error handling when
try_get_module() fails doesn't properly unwind all that has been done,
e.g. doesn't call kvm_arch_pre_destroy_vm() and doesn't remove the VM
from the global list. Not removing VMs from the global list tends to be
fatal, e.g. leads to use-after-free explosions.
The obvious alternative would be to add proper unwinding, but the
justification for using try_get_module(), "rmmod --wait", is completely
bogus as support for "rmmod --wait", i.e. delete_module() without
O_NONBLOCK, was removed by commit 3f2b9c9cdf ("module: remove rmmod
--wait option.") nearly a decade ago.
It's still possible for try_get_module() to fail due to the module dying
(more like being killed), as the module will be tagged MODULE_STATE_GOING
by "rmmod --force", i.e. delete_module(..., O_TRUNC), but playing nice
with forced unloading is an exercise in futility and gives a falsea sense
of security. Using try_get_module() only prevents acquiring _new_
references, it doesn't magically put the references held by other VMs,
and forced unloading doesn't wait, i.e. "rmmod --force" on KVM is all but
guaranteed to cause spectacular fireworks; the window where KVM will fail
try_get_module() is tiny compared to the window where KVM is building and
running the VM with an elevated module refcount.
Addressing KVM's inability to play nice with "rmmod --force" is firmly
out-of-scope. Forcefully unloading any module taints kernel (for obvious
reasons) _and_ requires the kernel to be built with
CONFIG_MODULE_FORCE_UNLOAD=y, which is off by default and comes with the
amusing disclaimer that it's "mainly for kernel developers and desperate
users". In other words, KVM is free to scoff at bug reports due to using
"rmmod --force" while VMs may be running.
Fixes: 5f6de5cbeb ("KVM: Prevent module exit until all VMs are freed")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220816053937.2477106-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Properly unwind VM creation if kvm_create_vm_debugfs() fails. A recent
change to invoke kvm_create_vm_debug() in kvm_create_vm() was led astray
by buggy try_get_module() handling adding by commit 5f6de5cbeb ("KVM:
Prevent module exit until all VMs are freed"). The debugfs error path
effectively inherits the bad error path of try_module_get(), e.g. KVM
leaves the to-be-free VM on vm_list even though KVM appears to do the
right thing by calling module_put() and falling through.
Opportunistically hoist kvm_create_vm_debugfs() above the call to
kvm_arch_post_init_vm() so that the "post-init" arch hook is actually
invoked after the VM is initialized (ignoring kvm_coalesced_mmio_init()
for the moment). x86 is the only non-nop implementation of the post-init
hook, and it doesn't allocate/initialize any objects that are reachable
via debugfs code (spawns a kthread worker for the NX huge page mitigation).
Leave the buggy try_get_module() alone for now, it will be fixed in a
separate commit.
Fixes: b74ed7a68e ("KVM: Actually create debugfs in kvm_create_vm()")
Reported-by: syzbot+744e173caec2e1627ee0@syzkaller.appspotmail.com
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220816053937.2477106-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the capability to map non-linear xdp frames in XDP_TX and
ndo_xdp_xmit callback.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220817173628.109102-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
selftests: mlxsw: Add ordering tests for unified bridge model
Amit Cohen writes:
Commit 798661c736 ("Merge branch 'mlxsw-unified-bridge-conversion-part-6'")
converted mlxsw driver to use unified bridge model. In the legacy model,
when a RIF was created / destroyed, it was firmware's responsibility to
update it in the relevant FID classification records. In the unified bridge
model, this responsibility moved to software.
This set adds tests to check the order of configuration for the following
classifications:
1. {Port, VID} -> FID
2. VID -> FID
3. VNI -> FID (after decapsulation)
In addition, in the legacy model, software is responsible to update a
table which is used to determine the packet's egress VID. Add a test to
check that the order of configuration does not impact switch behavior.
See more details in the commit messages.
Note that the tests supposed to pass also using the legacy model, they
are added now as with the new model they test the driver and not the
firmware.
Patch set overview:
Patch #1 adds test for {Port, VID} -> FID
Patch #2 adds test for VID -> FID
Patch #3 adds test for VNI -> FID
Patch #4 adds test for egress VID classification
====================
Link: https://lore.kernel.org/r/cover.1660747162.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After routing, the device always consults a table that determines the
packet's egress VID based on {egress RIF, egress local port}. In the
unified bridge model, it is up to software to maintain this table via
REIV register.
The table needs to be updated in the following flows:
1. When a RIF is set on a FID, for each FID's {Port, VID} mapping, a new
{RIF, Port}->VID mapping should be created.
2. When a {Port, VID} is mapped to a FID and the FID already has a RIF,
a new {RIF, Port}->VID mapping should be created.
Add a test to verify that packets get the correct VID after routing,
regardless of the order of the configuration.
# ./egress_vid_classification.sh
TEST: Add RIF for existing {port, VID}->FID mapping [ OK ]
TEST: Add {port, VID}->FID mapping for FID with a RIF [ OK ]
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before layer 2 forwarding, the device classifies an incoming packet to a
FID. After classification, the FID is known, but also all the attributes of
the FID, such as the router interface (RIF) via which a packet that needs
to be routed will ingress the router block.
For VXLAN decapsulation, the FID classification is done according to the
VNI. When a RIF is added on top of a FID, the existing VNI->FID mapping
should be updated by the software with the new RIF. In addition, when a new
mapping is added for FID which already has a RIF, the correct RIF should
be used for it.
Add a test to verify that packets can be routed after decapsulation which
is done after VNI->FID classification, regardless of the order of the
configuration.
# ./ingress_rif_conf_vxlan.sh
TEST: Add RIF for existing VNI->FID mapping [ OK ]
TEST: Add VNI->FID mapping for FID with a RIF [ OK ]
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before layer 2 forwarding, the device classifies an incoming packet to a
FID. After classification, the FID is known, but also all the attributes of
the FID, such as the router interface (RIF) via which a packet that needs
to be routed will ingress the router block.
For VLAN-aware bridges (802.1Q), the FID classification is done according
to VID. When a RIF is added on top of a FID, the existing VID->FID mapping
should be updated by the software with the new RIF.
We never map multiple VLANs to the same FID using VID->FID, so we cannot
create VID->FID for FID which already has a RIF using 802.1Q. Anyway,
verify that packets can be routed via port which is added after the FID
already has a RIF.
Add a test to verify that packets can be routed after VID->FID
classification, regardless of the order of the configuration.
# ./ingress_rif_conf_1q.sh
TEST: Add RIF for existing VID->FID mapping [ OK ]
TEST: Add port to VID->FID mapping for FID with a RIF [ OK ]
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before layer 2 forwarding, the device classifies an incoming packet to a
FID. After classification, the FID is known, but also all the attributes of
the FID, such as the router interface (RIF) via which a packet that needs
to be routed will ingress the router block.
For VLAN-unaware bridges (802.1D), the FID classification is done according
to {Port, VID}. When a RIF is added on top of a FID, all the existing
{Port, VID}->FID mappings should be updated by the software with the new
RIF. In addition, when a new mapping is added for FID which already has a
RIF, the correct RIF should be used for it.
Add a test to verify that packets can be routed after {Port, VID}->FID
classification, regardless of the order of the configuration.
# ./ingress_rif_conf_1d.sh
TEST: Add RIF for existing {port, VID}->FID mapping [ OK ]
TEST: Add {port, VID}->FID mapping for FID with a RIF [ OK ]
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose MACSEC_SALT_LEN definition to user space to be
used in various user space applications such as iproute.
Iproute will use this as part of adding macsec extended
packet number support.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Link: https://lore.kernel.org/r/20220818153229.4721-1-ehakim@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- tcp: fix cleanup and leaks in tcp_read_skb() (the new way BPF
socket maps get data out of the TCP stack)
- tls: rx: react to strparser initialization errors
- netfilter: nf_tables: fix scheduling-while-atomic splat
- net: fix suspicious RCU usage in bpf_sk_reuseport_detach()
Current release - new code bugs:
- mlxsw: ptp: fix a couple of races, static checker warnings
and error handling
Previous releases - regressions:
- netfilter:
- nf_tables: fix possible module reference underflow in error path
- make conntrack helpers deal with BIG TCP (skbs > 64kB)
- nfnetlink: re-enable conntrack expectation events
- net: fix potential refcount leak in ndisc_router_discovery()
Previous releases - always broken:
- sched: cls_route: disallow handle of 0
- neigh: fix possible local DoS due to net iface start/stop loop
- rtnetlink: fix module refcount leak in rtnetlink_rcv_msg
- sched: fix adding qlen to qcpu->backlog in gnet_stats_add_queue_cpu
- virtio_net: fix endian-ness for RSS
- dsa: mv88e6060: prevent crash on an unused port
- fec: fix timer capture timing in `fec_ptp_enable_pps()`
- ocelot: stats: fix races, integer wrapping and reading incorrect
registers (the change of register definitions here accounts for
bulk of the changed LoC in this PR)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ednY
-----END PGP SIGNATURE-----
Merge tag 'net-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- tcp: fix cleanup and leaks in tcp_read_skb() (the new way BPF
socket maps get data out of the TCP stack)
- tls: rx: react to strparser initialization errors
- netfilter: nf_tables: fix scheduling-while-atomic splat
- net: fix suspicious RCU usage in bpf_sk_reuseport_detach()
Current release - new code bugs:
- mlxsw: ptp: fix a couple of races, static checker warnings and
error handling
Previous releases - regressions:
- netfilter:
- nf_tables: fix possible module reference underflow in error path
- make conntrack helpers deal with BIG TCP (skbs > 64kB)
- nfnetlink: re-enable conntrack expectation events
- net: fix potential refcount leak in ndisc_router_discovery()
Previous releases - always broken:
- sched: cls_route: disallow handle of 0
- neigh: fix possible local DoS due to net iface start/stop loop
- rtnetlink: fix module refcount leak in rtnetlink_rcv_msg
- sched: fix adding qlen to qcpu->backlog in gnet_stats_add_queue_cpu
- virtio_net: fix endian-ness for RSS
- dsa: mv88e6060: prevent crash on an unused port
- fec: fix timer capture timing in `fec_ptp_enable_pps()`
- ocelot: stats: fix races, integer wrapping and reading incorrect
registers (the change of register definitions here accounts for
bulk of the changed LoC in this PR)"
* tag 'net-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
net: moxa: MAC address reading, generating, validity checking
tcp: handle pure FIN case correctly
tcp: refactor tcp_read_skb() a bit
tcp: fix tcp_cleanup_rbuf() for tcp_read_skb()
tcp: fix sock skb accounting in tcp_read_skb()
igb: Add lock to avoid data race
dt-bindings: Fix incorrect "the the" corrections
net: genl: fix error path memory leak in policy dumping
stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove()
net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_xdp_run
net/mlx5e: Allocate flow steering storage during uplink initialization
net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats
net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset
net: mscc: ocelot: make struct ocelot_stat_layout array indexable
net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work
net: mscc: ocelot: turn stats_lock into a spinlock
net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter
net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters
net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters
net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it
...
This Kselftest fixes update for Linux 6.0-rc2 consists of a single
patch to fix landlock test build regression.
-----BEGIN PGP SIGNATURE-----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=vyxJ
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
- fix landlock test build regression
* tag 'linux-kselftest-next-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/landlock: fix broken include of linux/landlock.h
- Fix tracer name in comments and prints
- Fix setting up symlinks
- Allow extra flags to be set in build
- Consolidate and show all necessary libraries not found in build error
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYv5O3xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlD4AQDxpm0ZS3qm62TAUiFySPUB7d4F7aUq
6acvEVEIa/4bygEA3VIfFzicJ659JYYZyJtIg3kdi9gnf+hKffXFKJNStAM=
=CPxj
-----END PGP SIGNATURE-----
Merge tag 'trace-rtla-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull rtla tool fixes from Steven Rostedt:
"Fixes for the Real-Time Linux Analysis tooling:
- Fix tracer name in comments and prints
- Fix setting up symlinks
- Allow extra flags to be set in build
- Consolidate and show all necessary libraries not found in build
error"
* tag 'trace-rtla-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rtla: Consolidate and show all necessary libraries that failed for building
tools/rtla: Build with EXTRA_{C,LD}FLAGS
tools/rtla: Fix command symlinks
rtla: Fix tracer name
Martin KaFai Lau says:
====================
The code in bpf_setsockopt() is mostly a copy-and-paste from
the sock_setsockopt(), do_tcp_setsockopt(), do_ipv6_setsockopt(),
and do_ip_setsockopt(). As the allowed optnames in bpf_setsockopt()
grows, so are the duplicated code. The code between the copies
also slowly drifted.
This set is an effort to clean this up and reuse the existing
{sock,do_tcp,do_ipv6,do_ip}_setsockopt() as much as possible.
After the clean up, this set also adds a few allowed optnames
that we need to the bpf_setsockopt().
The initial attempt was to clean up both bpf_setsockopt() and
bpf_getsockopt() together. However, the patch set was getting
too long. It is beneficial to leave the bpf_getsockopt()
out for another patch set. Thus, this set is focusing
on the bpf_setsockopt().
v4:
- This set now depends on the commit f574f7f839 ("net: bpf: Use the protocol's set_rcvlowat behavior if there is one")
in the net-next tree. The commit calls a specific protocol's
set_rcvlowat and it changed the bpf_setsockopt
which this set has also changed.
Because of this, patch 9 of this set has also adjusted
and a 'sock' NULL check is added to the sk_setsockopt()
because some of the bpf hooks have a NULL sk->sk_socket.
This removes more dup code from the bpf_setsockopt() side.
- Avoid mentioning specific prog types in the comment of
the has_current_bpf_ctx(). (Andrii)
- Replace signed with unsigned int bitfield in the
patch 15 selftest. (Daniel)
v3:
- s/in_bpf/has_current_bpf_ctx/ (Andrii)
- Add comment to has_current_bpf_ctx() and sockopt_lock_sock()
(Stanislav)
- Use vmlinux.h in selftest and add defines to bpf_tracing_net.h
(Stanislav)
- Use bpf_getsockopt(SO_MARK) in selftest (Stanislav)
- Use BPF_CORE_READ_BITFIELD in selftest (Yonghong)
v2:
- A major change is to use in_bpf() to test if a setsockopt()
is called by a bpf prog and use in_bpf() to skip capable
check. Suggested by Stanislav.
- Instead of passing is_locked through sockptr_t or through an extra
argument to sk_setsockopt, v2 uses in_bpf() to skip the lock_sock()
also because bpf prog has the lock acquired.
- No change to the current sockptr_t in this revision
- s/codes/code/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds tests to exercise optnames that are allowed
in bpf_setsockopt().
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061847.4182339-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a few optnames for bpf_setsockopt:
SO_REUSEADDR, IPV6_AUTOFLOWLABEL, TCP_MAXSEG, TCP_NODELAY,
and TCP_THIN_LINEAR_TIMEOUTS.
Thanks to the previous patches of this set, all additions can reuse
the sk_setsockopt(), do_ipv6_setsockopt(), and do_tcp_setsockopt().
The only change here is to allow them in bpf_setsockopt.
The bpf prog has been able to read all members of a sk by
using PTR_TO_BTF_ID of a sk. The optname additions here can also be
read by the same approach. Meaning there is a way to read
the values back.
These optnames can also be added to bpf_getsockopt() later with
another patch set that makes the bpf_getsockopt() to reuse
the sock_getsockopt(), tcp_getsockopt(), and ip[v6]_getsockopt().
Thus, this patch does not add more duplicated code to
bpf_getsockopt() now.
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061841.4181642-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After the prep work in the previous patches,
this patch removes the dup code from bpf_setsockopt(SOL_IPV6)
and reuses the implementation in do_ipv6_setsockopt().
ipv6 could be compiled as a module. Like how other code solved it
with stubs in ipv6_stubs.h, this patch adds the do_ipv6_setsockopt
to the ipv6_bpf_stub.
The current bpf_setsockopt(IPV6_TCLASS) does not take the
INET_ECN_MASK into the account for tcp. The
do_ipv6_setsockopt(IPV6_TCLASS) will handle it correctly.
The existing optname white-list is refactored into a new
function sol_ipv6_setsockopt().
After this last SOL_IPV6 dup code removal, the __bpf_setsockopt()
is simplified enough that the extra "{ }" around the if statement
can be removed.
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061834.4181198-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After the prep work in the previous patches,
this patch removes the dup code from bpf_setsockopt(SOL_IP)
and reuses the implementation in do_ip_setsockopt().
The existing optname white-list is refactored into a new
function sol_ip_setsockopt().
NOTE,
the current bpf_setsockopt(IP_TOS) is quite different from the
the do_ip_setsockopt(IP_TOS). For example, it does not take
the INET_ECN_MASK into the account for tcp and also does not adjust
sk->sk_priority. It looks like the current bpf_setsockopt(IP_TOS)
was referencing the IPV6_TCLASS implementation instead of IP_TOS.
This patch tries to rectify that by using the do_ip_setsockopt(IP_TOS).
While this is a behavior change, the do_ip_setsockopt(IP_TOS) behavior
is arguably what the user is expecting. At least, the INET_ECN_MASK bits
should be masked out for tcp.
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061826.4180990-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After the prep work in the previous patches,
this patch removes all the dup code from bpf_setsockopt(SOL_TCP)
and reuses the do_tcp_setsockopt().
The existing optname white-list is refactored into a new
function sol_tcp_setsockopt(). The sol_tcp_setsockopt()
also calls the bpf_sol_tcp_setsockopt() to handle
the TCP_BPF_XXX specific optnames.
bpf_setsockopt(TCP_SAVE_SYN) now also allows a value 2 to
save the eth header also and it comes for free from
do_tcp_setsockopt().
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061819.4180146-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The patch moves all bpf specific tcp optnames (TCP_BPF_XXX)
to a new function bpf_sol_tcp_setsockopt(). This will make
the next patch easier to follow.
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061812.4179645-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After the prep work in the previous patches,
this patch removes most of the dup code from bpf_setsockopt(SOL_SOCKET)
and reuses them from sk_setsockopt().
The sock ptr test is added to the SO_RCVLOWAT because
the sk->sk_socket could be NULL in some of the bpf hooks.
The existing optname white-list is refactored into a new
function sol_socket_setsockopt().
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061804.4178920-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
