OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and
InOctetsDecrypted were incrementing by the total number of octets in frames
instead of by the number of octets of User Data in frames.
The Controlled Port statistics ifOutOctets and ifInOctets were incrementing
by the total number of octets instead of the number of octets of the MSDUs
plus octets of the destination and source MAC addresses.
The Controlled Port statistics ifInDiscards and ifInErrors were not
incrementing each time the counters they aggregate were.
The Controlled Port statistic ifInErrors was not included in the output of
macsec_get_stats64 so the value was not present in ip commands output.
The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA
were not incrementing.
Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge series from Martin Povišer <povik+lin@cutebit.org>:
The first two fixes should be straightforward.
The latter two clean up what looks to me like a mess in the setting of
power levels. However we settle it, we should then do the same changes
to TAS2764, which has the same template (and maybe there are other
drivers).
For proper operation of i915 we need usable PCI GTTMMADDR BAR 0
(1 for GEN2). In most cases we also need usable PCI GFXMEM BAR 2.
Let's add functions to check if BARs are set, and that it have
a size greater than 0.
In case GTTMMADDR BAR, let's validate at the beginning of i915
initialization.
For other BARs, let's validate before first use.
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220805155959.1983584-3-piotr.piorkowski@intel.com
At the moment, when we refer to some PCI BAR we use the number of
this BAR in the code. The meaning of BARs between different platforms
may be different. Therefore, in order to organize the code,
let's start using defined names instead of numbers.
v2: Add lost header in cfg_space.c
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220805155959.1983584-2-piotr.piorkowski@intel.com
Don't populate the read-only array marker on the stack but instead make
it static const. Also makes the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220809181544.3046429-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Imagine two non-blocking vsock_connect() requests on the same socket.
The first request schedules @connect_work, and after it times out,
vsock_connect_timeout() sets *sock* state back to TCP_CLOSE, but keeps
*socket* state as SS_CONNECTING.
Later, the second request returns -EALREADY, meaning the socket "already
has a pending connection in progress", even though the first request has
already timed out.
As suggested by Stefano, fix it by setting *socket* state back to
SS_UNCONNECTED, so that the second request will return -ETIMEDOUT.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An O_NONBLOCK vsock_connect() request may try to reschedule
@connect_work. Imagine the following sequence of vsock_connect()
requests:
1. The 1st, non-blocking request schedules @connect_work, which will
expire after 200 jiffies. Socket state is now SS_CONNECTING;
2. Later, the 2nd, blocking request gets interrupted by a signal after
a few jiffies while waiting for the connection to be established.
Socket state is back to SS_UNCONNECTED, but @connect_work is still
pending, and will expire after 100 jiffies.
3. Now, the 3rd, non-blocking request tries to schedule @connect_work
again. Since @connect_work is already scheduled,
schedule_delayed_work() silently returns. sock_hold() is called
twice, but sock_put() will only be called once in
vsock_connect_timeout(), causing a memory leak reported by syzbot:
BUG: memory leak
unreferenced object 0xffff88810ea56a40 (size 1232):
comm "syz-executor756", pid 3604, jiffies 4294947681 (age 12.350s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
28 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............
backtrace:
[<ffffffff837c830e>] sk_prot_alloc+0x3e/0x1b0 net/core/sock.c:1930
[<ffffffff837cbe22>] sk_alloc+0x32/0x2e0 net/core/sock.c:1989
[<ffffffff842ccf68>] __vsock_create.constprop.0+0x38/0x320 net/vmw_vsock/af_vsock.c:734
[<ffffffff842ce8f1>] vsock_create+0xc1/0x2d0 net/vmw_vsock/af_vsock.c:2203
[<ffffffff837c0cbb>] __sock_create+0x1ab/0x2b0 net/socket.c:1468
[<ffffffff837c3acf>] sock_create net/socket.c:1519 [inline]
[<ffffffff837c3acf>] __sys_socket+0x6f/0x140 net/socket.c:1561
[<ffffffff837c3bba>] __do_sys_socket net/socket.c:1570 [inline]
[<ffffffff837c3bba>] __se_sys_socket net/socket.c:1568 [inline]
[<ffffffff837c3bba>] __x64_sys_socket+0x1a/0x20 net/socket.c:1568
[<ffffffff84512815>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84512815>] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80
[<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
<...>
Use mod_delayed_work() instead: if @connect_work is already scheduled,
reschedule it, and undo sock_hold() to keep the reference count
balanced.
Reported-and-tested-by: syzbot+b03f55bf128f9a38f064@syzkaller.appspotmail.com
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Co-developed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use GENMASK() to generate the masks of device type and device id,
fixing compilation errors due to the sign extension when using
older versions of GCC (such as is 7.5):
In function ‘kvm_vm_ioctl_set_device_addr.isra.38’,
inlined from ‘kvm_arch_vm_ioctl’ at arch/arm64/kvm/arm.c:1454:10:
././include/linux/compiler_types.h:354:38: error: call to ‘__compiletime_assert_599’ \
declared with attribute error: FIELD_GET: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
Fixes: 9f968c9266 ("KVM: arm64: vgic-v2: Add helper for legacy dist/cpuif base address setting")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[maz: tidy up commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220810013435.1525363-1-yangyingliang@huawei.com
'IPv4 and IPv4' should be 'IPv4 and IPv6'.
Signed-off-by: Topi Miettinen <toiwoton@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmLzWagTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXU/wB/4lE4h9FGmCkAT14+y/83zPZ+eK3Sym
EjtOLJA6RX7WwsIICU5xTGr8imQQIju0Q2fMzmaweT3+bley8uvdN6zUVhf5UyjX
7wmud4x5TfZxj22EUQM+MmWCuAiUet3zf9ad+2zdUsCNWI6VH6kwGYHZAC5JhZz/
zZqG8Z+oB/nt0ykMsmNHea6w60P3DDD5icAqY6J8nkIOozpxhm1anRGshYj88YwH
CRwXZv1DgjwMgJyPMMyM8xWb1zEOsPDOu6HgzChnphLZTe+XL/prU5TZazG52aNU
yEq5ooV7kT0ld5enClyY5v4voTlR+TAgJshpdiVV19peZXKtslQA+dfk
=sGmZ
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.0-20220810' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
this is a pull request of 4 patches for net/master, with the
whitespace issue fixed.
Fedor Pchelkin contributes 2 fixes for the j1939 CAN protocol.
A patch by me for the ems_usb driver fixes an unaligned access
warning.
Sebastian Würl's patch for the mcp251x driver fixes a race condition
in the receive interrupt.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
BUG_ON() is a tasteless choice as a sanity check for a driver like UDL
that isn't really a core code. Replace with WARN_ON() and proper
error handling instead.
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804075826.27036-5-tiwai@suse.de
At both suspend and disconnect, we should rather cancel the pending
URBs immediately. For the suspend case, the display will be turned
off, so it makes no sense to process the rendering. And for the
disconnect case, the device may be no longer accessible, hence we
shouldn't do any submission.
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804075826.27036-4-tiwai@suse.de
We need to wait for finishing to process the all URBs after disabling
the pipe; otherwise pending URBs may stray at suspend/resume, leading
to a possible memory corruption in a worst case.
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804075826.27036-3-tiwai@suse.de
UDL driver uses a semaphore for controlling the emptiness of FIFO in a
slightly funky way. This patch replaces it with a wait queue and
controls the emptiness with the standard wait_event*() macro instead,
which is a more straightforward implementation.
While we are at it, drop the dead code for delayed semaphore down,
too.
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804075826.27036-2-tiwai@suse.de
lm90_detect_nuvoton() is supposed to return NULL if it can not detect
a chip, or a pointer to the chip name if it does. Under some circumstances
it returns an error pointer instead. Some versions of gcc interpret an
ERR_PTR as region of size 0 and generate an error message.
In function ‘__fortify_strlen’,
inlined from ‘strlcpy’ at ./include/linux/fortify-string.h:159:10,
inlined from ‘lm90_detect’ at drivers/hwmon/lm90.c:2550:2:
./include/linux/fortify-string.h:50:33: error:
‘__builtin_strlen’ reading 1 or more bytes from a region of size 0
50 | #define __underlying_strlen __builtin_strlen
| ^
./include/linux/fortify-string.h:141:24: note:
in expansion of macro ‘__underlying_strlen’
141 | return __underlying_strlen(p);
| ^~~~~~~~~~~~~~~~~~~
Returning NULL instead of ERR_PTR() fixes the problem.
Fixes: c7cebce984 ("hwmon: (lm90) Rework detect function")
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rename the parameter vmap to src in all functions. The parameter
contains the locations of the source data and the new name says that.
v3:
* fix typo in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-15-tzimmermann@suse.de
The format-convertion helpers handle several cases for different
values of destination buffer and pitch. Move that code into the
internal helper drm_fb_xfrm() and avoid quite a bit of duplication.
v2:
* remove a duplicated blank line (Jose)
* use drm_format_info_bpp() (Sam)
* fix vaddr_cached_hint bug (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-14-tzimmermann@suse.de
Update XRGB8888-to-MONO conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* rebase after renaming CMA helpers to DMA helpers
* update documentation (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-13-tzimmermann@suse.de
Update XRGB8888-to-GRAY8 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-12-tzimmermann@suse.de
Update XRGB8888-to-XRGB2101010 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-11-tzimmermann@suse.de
Update RGB888-to-XRGB8888 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-10-tzimmermann@suse.de
Update RGB565-to-XRGB8888 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-9-tzimmermann@suse.de
Update XRGB8888-to-RGB888 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-8-tzimmermann@suse.de
Update XRGB8888-to-RGB565 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* update new Kunit tests
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-7-tzimmermann@suse.de
Update XRGB8888-to-RGB332 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* rebase onto refactored Kunit tests
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-6-tzimmermann@suse.de
Convert drm_fb_swab() to use struct iosys_map() and convert users. The
new interface supports multi-plane color formats, but implementation
only supports a single plane for now.
v2:
* use drm_format_info_bpp() (Sam)
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-5-tzimmermann@suse.de
Merge drm_fb_memcpy() and drm_fb_memcpy_toio() into a drm_fb_memcpy()
that uses struct iosys_map for buffers. The new function also supports
multi-plane color formats. Convert all users of the original helpers.
v2:
* rebase onto refactored mgag200
* use drm_formap_info_bpp() (Sam)
* do static init in hyperv and mgag200 (Sam)
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-4-tzimmermann@suse.de
Provide drm_fb_blit() that works with struct iosys_map. Update all
users of drm_fb_blit_toio(), which required a destination buffer in
I/O memory.
This patch only updates the function's interface. The implementation
still relies on the destination buffer to be located in I/O memory.
See the follow-up patches for implementational changes. The new
function's interface works with multi-plane color formats, but again
implementation only supports a single plane for now.
v2:
* rebase onto refactored simpledrm
* use IOSYS_MAP_INIT_VADDR() (Sam)
* update the commit message on the use of I/O memory (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-3-tzimmermann@suse.de
clang 14 won't build because ret is uninitialised and can be returned if
both prop and fdtprop are NULL. Drop the ret variable and return an
error in that failure case.
Fixes: b1fc44eaa9 ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220810054331.373761-1-ruscur@russell.cc
Mac80211 core may ask driver to change to idle mode during HW scan,
then H2C command for HW scan will send failed since chip is in idle
mode. Therefore, We check the SCANNING flag before entering IPS to
prevent this behavior.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-8-pkshih@realtek.com
Enter or leave IPS controlled by mac80211 before driver support HW
scan. After support HW scan, driver need to control IPS before start
HW scan and scan complete, but mac80211 also ask driver enter or leave
IPS. Therefore, we add flag check in IPS to prevent entering or
leaving IPS twice.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-7-pkshih@realtek.com
We need to flush queue before HW scan to avoid packets dropped by hardware.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-6-pkshih@realtek.com
During HW scan, the channel related feilds in hal struct changed partially.
If setting Tx power will get WARNING:rtw_get_tx_power_params() due to some
of fields in hal struct mismatch. Therefore, we fix to change all required
fields in hal struct when channel switch during HW scan.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-5-pkshih@realtek.com
In order to set channel info to hal during HW scan, we add the update
channel flow to support setting by parameters to meet the HW scan
requriement.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-4-pkshih@realtek.com
Applying regulatory and getting Tx power table will access hal
data, it should hold rtwdev::mutex to avoid hal data changed during
setting flow.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-3-pkshih@realtek.com
Applying SAR will access hal data, it should hold rtwdev::mutex
to avoid hal data changed during setting flow.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-2-pkshih@realtek.com
The skb will be allocated to send TIM update info in brcmf_fws_tim_update.
Currently the skb will be freed when tx is failed but it will not be freed
when tx is completed successfully. The fix is to free the skb when tx is
completed always.
Signed-off-by: Wataru Gohda <wataru.gohda@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-6-alvin@pqrs.dk
Conn_info->req_ie/resp_ie is used to indicate the assoc_req_ies /
assoc_resp_ies to cfg80211 layer when connection is done. The buffer is
freed and allocated again at next connection establishment. The buffers
also needs to be freed at the timing of rmmod as well.
Signed-off-by: Wataru Gohda <wataru.gohda@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-5-alvin@pqrs.dk
We should not sleep while holding the spin lock. It makes
'scheduling while atomic' in brcmf_msgbuf_delete_flowring.
And to avoid race condition between deleting flowring and txflow,
we only hold spin lock when seting flowring status to RING_CLOSING.
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-3-alvin@pqrs.dk
The race condition in brcmf_msgbuf_txflow and brcmf_msgbuf_delete_flowring
makes tx_msghdr writing after brcmf_msgbuf_remove_flowring. Host
driver should delete flowring after txflow complete and all txstatus back,
or pend_8021x_cnt will never be zero and cause every connection 950
milliseconds(MAX_WAIT_FOR_8021X_TX) delay.
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-2-alvin@pqrs.dk
PPC_RAW_TW() is erroneously defined with base code 0x7f000008
instead of 0x7c000008.
That's invisible because its only user is PPC_RAW_TRAP() which is
0x7fe00008, but fix it anyway to avoid any risk of future bug.
Fixes: d00d762daf ("powerpc/ppc-opcode: Define and use PPC_RAW_TRAP() and PPC_RAW_TW()")
Reported-by: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eca9251f1e1f82c4c46ec6380ddb28356ab3fdfe.1659527244.git.christophe.leroy@csgroup.eu
Just like the first patch of this series, define a local 'eh' in order
to make the code clearer.
And IS_ENABLED() returns either 1 or 0 so no need to do
IS_ENABLED(CONFIG_PPC64) ? 1 : 0.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Use symbolic names, use 'n' constraint per Segher]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/629befaa2d05e2922346e58a383886510d6af55a.1659430931.git.christophe.leroy@csgroup.eu
The eh field must remain 0 for PPC32 and is only used
by PPC64.
Don't hide that behind a macro, just leave the responsibility
to the user.
At the time being, the only users of PPC_RAW_L{WDQ}ARX are
setting the eh field to 0, so the special handling of __PPC_EH
is useless. Just take the value given by the caller.
Same for DEFINE_TESTOP(), don't do special handling in that
macro, ensure the caller hands over the proper eh value.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Use 'n' constraint per Segher]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8b9c8a1a14f9143552a85fcbf96698224a8c2469.1659430931.git.christophe.leroy@csgroup.eu
