commit 096208592b upstream.
This initializes tclass and dontfrag before cmsg parsing, removing the
need for explicit checks against -1 in each caller.
Leave hlimit set to -1, because its full initialization
(in ip6_sk_dst_hoplimit) requires more state (dst, flowi6, ..).
This also prepares for calling sockcm_init in a follow-on patch.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-7-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ead7f9b8de upstream.
In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.
When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:
1: void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
2: __wsum diff, bool pseudohdr)
3: {
4: if (skb->ip_summed != CHECKSUM_PARTIAL) {
5: csum_replace_by_diff(sum, diff);
6: if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
7: skb->csum = ~csum_sub(diff, skb->csum);
8: } else if (pseudohdr) {
9: *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum)));
10: }
11: }
The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.
For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.
The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.
This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.
This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.
Fixes: 7d672345ed ("bpf: add generic bpf_csum_diff helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6043b794c7 upstream.
During ILA address translations, the L4 checksums can be handled in
different ways. One of them, adj-transport, consist in parsing the
transport layer and updating any found checksum. This logic relies on
inet_proto_csum_replace_by_diff and produces an incorrect skb->csum when
in state CHECKSUM_COMPLETE.
This bug can be reproduced with a simple ILA to SIR mapping, assuming
packets are received with CHECKSUM_COMPLETE:
$ ip a show dev eth0
14: eth0@if15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 62:ae:35:9e:0f:8d brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet6 3333:0:0:1::c078/64 scope global
valid_lft forever preferred_lft forever
inet6 fd00:10:244:1::c078/128 scope global nodad
valid_lft forever preferred_lft forever
inet6 fe80::60ae:35ff:fe9e:f8d/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
$ ip ila add loc_match fd00:10:244:1 loc 3333:0:0:1 \
csum-mode adj-transport ident-type luid dev eth0
Then I hit [fd00:10:244:1::c078]:8000 with a server listening only on
[3333:0:0:1::c078]:8000. With the bug, the SYN packet is dropped with
SKB_DROP_REASON_TCP_CSUM after inet_proto_csum_replace_by_diff changed
skb->csum. The translation and drop are visible on pwru [1] traces:
IFACE TUPLE FUNC
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ipv6_rcv
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ip6_rcv_core
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) nf_hook_slow
eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) inet_proto_csum_replace_by_diff
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_early_demux
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_route_input
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input_finish
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_protocol_deliver_rcu
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) raw6_local_deliver
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ipv6_raw_deliver
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_rcv
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) __skb_checksum_complete
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skb_reason(SKB_DROP_REASON_TCP_CSUM)
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_head_state
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_data
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_free_head
eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skbmem
This is happening because inet_proto_csum_replace_by_diff is updating
skb->csum when it shouldn't. The L4 checksum is updated such that it
"cancels" the IPv6 address change in terms of checksum computation, so
the impact on skb->csum is null.
Note this would be different for an IPv4 packet since three fields
would be updated: the IPv4 address, the IP checksum, and the L4
checksum. Two would cancel each other and skb->csum would still need
to be updated to take the L4 checksum change into account.
This patch fixes it by passing an ipv6 flag to
inet_proto_csum_replace_by_diff, to skip the skb->csum update if we're
in the IPv6 case. Note the behavior of the only other user of
inet_proto_csum_replace_by_diff, the BPF subsystem, is left as is in
this patch and fixed in the subsequent patch.
With the fix, using the reproduction from above, I can confirm
skb->csum is not touched by inet_proto_csum_replace_by_diff and the TCP
SYN proceeds to the application after the ILA translation.
Link: https://github.com/cilium/pwru [1]
Fixes: 65d7ab8de5 ("net: Identifier Locator Addressing module")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/b5539869e3550d46068504feb02d37653d939c0b.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 081056dc00 upstream.
Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops->may_split(). This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.
Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens. At that
point, both the VMA and the rmap(s) are write-locked.
An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:
1. from hugetlb_split(), holding:
- mmap lock (exclusively)
- VMA lock
- file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
call us with only the mmap lock held (in shared mode), but currently
only runs while holding mmap lock (exclusively) and VMA lock
Backporting note:
This commit fixes a racy protection that was introduced in commit
b30c14cd61 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.
[jannh@google.com: v2]
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com
Fixes: 39dde65c99 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [b30c14cd61: hugetlb: unshare some PMDs when splitting VMAs]
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[stable backport: added missing include]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7851263998 upstream.
In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by
atm_account_tx().
It is expected to be reverted by atm_pop_raw() later called by
vcc->dev->ops->send(vcc, skb).
However, vcc_sendmsg() misses the same revert when copy_from_iter_full()
fails, and then we will leak a socket.
Let's factorise the revert part as atm_return_tx() and call it in
the failure path.
Note that the corresponding sk_wmem_alloc operation can be found in
alloc_tx() as of the blamed commit.
$ git blame -L:alloc_tx net/atm/common.c c55fa3cccb~
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20250614161959.GR414686@horms.kernel.org/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250616182147.963333-3-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4876376988 ]
This reverts commit 484a54c2e5. The CoDel
parameter change essentially disables CoDel on slow stations, with some
questionable assumptions, as Dave pointed out in [0]. Quoting from
there:
But here are my pithy comments as to why this part of mac80211 is so
wrong...
static void sta_update_codel_params(struct sta_info *sta, u32 thr)
{
- if (thr && thr < STA_SLOW_THRESHOLD * sta->local->num_sta) {
1) sta->local->num_sta is the number of associated, rather than
active, stations. "Active" stations in the last 50ms or so, might have
been a better thing to use, but as most people have far more than that
associated, we end up with really lousy codel parameters, all the
time. Mistake numero uno!
2) The STA_SLOW_THRESHOLD was completely arbitrary in 2016.
- sta->cparams.target = MS2TIME(50);
This, by itself, was probably not too bad. 30ms might have been
better, at the time, when we were battling powersave etc, but 20ms was
enough, really, to cover most scenarios, even where we had low rate
2Ghz multicast to cope with. Even then, codel has a hard time finding
any sane drop rate at all, with a target this high.
- sta->cparams.interval = MS2TIME(300);
But this was horrible, a total mistake, that is leading to codel being
completely ineffective in almost any scenario on clients or APS.
100ms, even 80ms, here, would be vastly better than this insanity. I'm
seeing 5+seconds of delay accumulated in a bunch of otherwise happily
fq-ing APs....
100ms of observed jitter during a flow is enough. Certainly (in 2016)
there were interactions with powersave that I did not understand, and
still don't, but if you are transmitting in the first place, powersave
shouldn't be a problemmmm.....
- sta->cparams.ecn = false;
At the time we were pretty nervous about ecn, I'm kind of sanguine
about it now, and reliably indicating ecn seems better than turning it
off for any reason.
[...]
In production, on p2p wireless, I've had 8ms and 80ms for target and
interval for years now, and it works great.
I think Dave's arguments above are basically sound on the face of it,
and various experimentation with tighter CoDel parameters in the OpenWrt
community have show promising results[1]. So I don't think there's any
reason to keep this parameter fiddling; hence this revert.
[0] https://lore.kernel.org/linux-wireless/CAA93jw6NJ2cmLmMauz0xAgC2MGbBq6n0ZiZzAdkK0u4b+O2yXg@mail.gmail.com/
[1] https://forum.openwrt.org/t/reducing-multiplexing-latencies-still-further-in-wifi/133605/130
Suggested-By: Dave Taht <dave.taht@gmail.com>
In-memory-of: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250403183930.197716-1-toke@toke.dk
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb5eb8a5b2 ]
------------[ cut here ]------------
WARNING: CPU: 3 PID: 579 at fs/f2fs/segment.c:2832 new_curseg+0x5e8/0x6dc
pc : new_curseg+0x5e8/0x6dc
Call trace:
new_curseg+0x5e8/0x6dc
f2fs_allocate_data_block+0xa54/0xe28
do_write_page+0x6c/0x194
f2fs_do_write_node_page+0x38/0x78
__write_node_page+0x248/0x6d4
f2fs_sync_node_pages+0x524/0x72c
f2fs_write_checkpoint+0x4bc/0x9b0
__checkpoint_and_complete_reqs+0x80/0x244
issue_checkpoint_thread+0x8c/0xec
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
get_new_segment() detects inconsistent status in between free_segmap
and free_secmap, let's record such error into super block, and bail
out get_new_segment() instead of continue using the segment.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea33537d82 ]
If the application can not drain fast enough a TCP socket queue,
tcp_rcv_space_adjust() can overestimate tp->rcvq_space.space.
Then sk->sk_rcvbuf can grow and hit tcp_rmem[2] for no good reason.
Fix this by taking into acount the number of available bytes.
Keeping sk->sk_rcvbuf at the right size allows better cache efficiency.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Link: https://patch.msgid.link/20250513193919.1089692-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9510b38dc0 ]
Adds the MMC_QUIRK_NO_UHS_DDR50_TUNING quirk and updates
mmc_execute_tuning() to return 0 if that quirk is set. This fixes an
issue on certain Swissbit SD cards that do not support DDR50 tuning
where tuning requests caused I/O errors to be thrown.
Signed-off-by: Erick Shepherd <erick.shepherd@ni.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250331221337.1414534-1-erick.shepherd@ni.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 66db876162 upstream.
Stubs in the header file for !CONFIG_STM32_FIREWALL case should be both
static and inline, because they do not come with earlier declaration and
should be inlined in every unit including the header.
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: stable@vger.kernel.org
Fixes: 5c9668cfc6 ("firewall: introduce stm32_firewall framework")
Link: https://lore.kernel.org/r/20250507092121.95121-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c78e793f7 upstream.
While not yet in the tree, there is a proposed patch[1] that was
depending on the prior behavior of _DEFINE_FLEX, which did not have an
explicit initializer. Provide this via __DEFINE_FLEX now, which can also
have attributes applied (e.g. __uninitialized).
Examples of the resulting initializer behaviors can be seen here:
https://godbolt.org/z/P7Go8Tr33
Link: https://lore.kernel.org/netdev/20250520205920.2134829-9-anthony.l.nguyen@intel.com [1]
Fixes: 47e36ed784 ("overflow: Fix direct struct member initialization in _DEFINE_FLEX()")
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe7f7ac8e0 upstream.
Update struct hid_descriptor to better reflect the mandatory and
optional parts of the HID Descriptor as per USB HID 1.11 specification.
Note: the kernel currently does not parse any optional HID class
descriptors, only the mandatory report descriptor.
Update all references to member element desc[0] to rpt_desc.
Add test to verify bLength and bNumDescriptors values are valid.
Replace the for loop with direct access to the mandatory HID class
descriptor member for the report descriptor. This eliminates the
possibility of getting an out-of-bounds fault.
Add a warning message if the HID descriptor contains any unsupported
optional HID class descriptors.
Reported-by: syzbot+c52569baf0c843f35495@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c52569baf0c843f35495
Fixes: f043bfc98c ("HID: usbhid: fix out-of-bounds bug")
Cc: stable@vger.kernel.org
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5e223e06ee ]
Similarly to 26064d3e2b ("block: fix adding folio to bio"), if
we attempt to add a folio that is larger than 4GB, we'll silently
truncate the offset and len. Widen the parameters to size_t, assert
that the length is less than 4GB and set the first page that contains
the interesting data rather than the first page of the folio.
Fixes: 26db5ee158 (block: add a bvec_set_folio helper)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20250612144255.2850278-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f826ec7966 ]
It is possible for physically contiguous folios to have discontiguous
struct pages if SPARSEMEM is enabled and SPARSEMEM_VMEMMAP is not.
This is correctly handled by folio_page_idx(), so remove this open-coded
implementation.
Fixes: 640d1930be (block: Add bio_for_each_folio_all())
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20250612144126.2849931-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2660a544fd ]
sk->sk_prot->sock_is_readable is a valid function pointer when sk resides
in a sockmap. After the last sk_psock_put() (which usually happens when
socket is removed from sockmap), sk->sk_prot gets restored and
sk->sk_prot->sock_is_readable becomes NULL.
This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded
after the initial check. Which in turn may lead to a null pointer
dereference.
Ensure the function pointer does not turn NULL after the check.
Fixes: 8934ce2fd0 ("bpf: sockmap redirect ingress support")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250609-skisreadable-toctou-v1-1-d0dfb2d62c37@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd3fa304ba ]
For some usecases a consumer driver requires its device to remain power-on
from the PM domain perspective during runtime. Using dev PM qos along with
the genpd governors, doesn't work for this case as would potentially
prevent the device from being runtime suspended too.
To support these usecases, let's introduce dev_pm_genpd_rpm_always_on() to
allow consumers drivers to dynamically control the behaviour in genpd for a
device that is attached to it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1738736156-119203-4-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 08f959759e ("mmc: sdhci-of-dwcmshc: add PD workaround on RK3576")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e1f706fc2 ]
S1G beacons are not traditional beacons but a type of extension frame.
Extension frames contain the frame control and duration fields, followed
by zero or more optional fields before the frame body. These optional
fields are distinct from the variable length elements.
The presence of optional fields is indicated in the frame control field.
To correctly locate the elements offset, the frame control must be parsed
to identify which optional fields are present. Currently, mac80211 parses
S1G beacons based on fixed assumptions about the frame layout, without
inspecting the frame control field. This can result in incorrect offsets
to the "variable" portion of the frame.
Properly parse S1G beacon frames by using the field lengths defined in
IEEE 802.11-2024, section 9.3.4.3, ensuring that the elements offset is
calculated accurately.
Fixes: 9eaffe5078 ("cfg80211: convert S1G beacon to scan results")
Fixes: cd418ba63f ("mac80211: convert S1G beacon to scan results")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250603053538.468562-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10f4a7cd72 ]
The command specific status code, 0x183, was introduced in the NVMe 2.0
specification defined to "Command Size Limits Exceeded" and only ever
applied to DSM and Copy commands. Fix the name and, remove the
incorrect translation to error codes and special treatment in the
target code for it.
Fixes: 3b7c33b28a ("nvme.h: add Write Zeroes definitions")
Cc: Chaitanya Kulkarni <chaitanyak@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f52aecc95 ]
The coresight_init_driver() of the coresight-core module is called from
the sub coresgiht device (such as tmc/stm/funnle/...) module. It calls
amba_driver_register() and Platform_driver_register(), which are macro
functions that use the coresight-core's module to initialize the caller's
owner field. Therefore, when the sub coresight device calls
coresight_init_driver(), an incorrect THIS_MODULE value is captured.
The sub coesgiht modules can be removed while their callbacks are
running, resulting in a general protection failure.
Add module parameter to coresight_init_driver() so can be called
with the module of the callback.
Fixes: 075b7cd7ad ("coresight: Add helpers registering/removing both AMBA and platform drivers")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240918035327.9710-1-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 793908d60b ]
When allocating space for an endpoint function on a BAR with a fixed size,
the size saved in 'struct pci_epf_bar.size' should be the fixed size as
expected by pci_epc_set_bar().
However, if pci_epf_alloc_space() increased the allocation size to
accommodate iATU alignment requirements, it previously saved the larger
aligned size in .size, which broke pci_epc_set_bar().
To solve this, keep the fixed BAR size in .size and save the aligned size
in a new .aligned_size for use when deallocating it.
Fixes: 2a9a801620 ("PCI: endpoint: Add support to specify alignment for buffers allocated to BARs")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[mani: commit message fixup]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[bhelgaas: more specific subject, commit log, wrap comment to match file]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250424-pci-ep-size-alignment-v5-1-2d4ec2af23f5@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9cb929670 ]
Both to_mdio_device() and to_phy_device() "throw away" the const pointer
attribute passed to them and return a non-const pointer, which generally
is not a good thing overall. Fix this up by using container_of_const()
which was designed for this very problem.
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Fixes: 7eab14de73 ("mdio, phy: fix -Wshadow warnings triggered by nested container_of()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052246-conduit-glory-8fc9@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45ca7e9f07 ]
In `struct virtio_vsock_sock`, we maintain two counters:
- `rx_bytes`: used internally to track how many bytes have been read.
This supports mechanisms like .stream_has_data() and sock_rcvlowat().
- `fwd_cnt`: used for the credit mechanism to inform available receive
buffer space to the remote peer.
These counters are updated via virtio_transport_inc_rx_pkt() and
virtio_transport_dec_rx_pkt().
Since the beginning with commit 06a8fc7836 ("VSOCK: Introduce
virtio_vsock_common.ko"), we call virtio_transport_dec_rx_pkt() in
virtio_transport_stream_do_dequeue() only when we consume the entire
packet, so partial reads, do not update `rx_bytes` and `fwd_cnt`.
This is fine for `fwd_cnt`, because we still have space used for the
entire packet, and we don't want to update the credit for the other
peer until we free the space of the entire packet. However, this
causes `rx_bytes` to be stale on partial reads.
Previously, this didn’t cause issues because `rx_bytes` was used only by
.stream_has_data(), and any unread portion of a packet implied data was
still available. However, since commit 93b8088766
("virtio/vsock: fix logic which reduces credit update messages"), we now
rely on `rx_bytes` to determine if a credit update should be sent when
the data in the RX queue drops below SO_RCVLOWAT value.
This patch fixes the accounting by updating `rx_bytes` with the number
of bytes actually read, even on partial reads, while leaving `fwd_cnt`
untouched until the packet is fully consumed. Also introduce a new
`buf_used` counter to check that the remote peer is honoring the given
credit; this was previously done via `rx_bytes`.
Fixes: 93b8088766 ("virtio/vsock: fix logic which reduces credit update messages")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250521121705.196379-1-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a119669fb ]
fib has two modes:
1. Obtain output device according to source or destination address
2. Obtain the type of the address, e.g. local, unicast, multicast.
'fib daddr type' should return 'local' if the address is configured
in this netns or unicast otherwise.
'fib daddr . iif type' should return 'local' if the address is configured
on the input interface or unicast otherwise, i.e. more restrictive.
However, if the interface is part of a VRF, then 'fib daddr type'
returns unicast even if the address is configured on the incoming
interface.
This is broken for both ipv4 and ipv6.
In the ipv4 case, inet_dev_addr_type must only be used if the
'iif' or 'oif' (strict mode) was requested.
Else inet_addr_type_dev_table() needs to be used and the correct
dev argument must be passed as well so the correct fib (vrf) table
is used.
In the ipv6 case, the bug is similar, without strict mode, dev is NULL
so .flowi6_l3mdev will be set to 0.
Add a new 'nft_fib_l3mdev_master_ifindex_rcu()' helper and use that
to init the .l3mdev structure member.
For ipv6, use it from nft_fib6_flowi_init() which gets called from
both the 'type' and the 'route' mode eval functions.
This provides consistent behaviour for all modes for both ipv4 and ipv6:
If strict matching is requested, the input respectively output device
of the netfilter hooks is used.
Otherwise, use skb->dev to obtain the l3mdev ifindex.
Without this, most type checks in updated nft_fib.sh selftest fail:
FAIL: did not find veth0 . 10.9.9.1 . local in fibtype4
FAIL: did not find veth0 . dead:1::1 . local in fibtype6
FAIL: did not find veth0 . dead:9::1 . local in fibtype6
FAIL: did not find tvrf . 10.0.1.1 . local in fibtype4
FAIL: did not find tvrf . 10.9.9.1 . local in fibtype4
FAIL: did not find tvrf . dead:1::1 . local in fibtype6
FAIL: did not find tvrf . dead:9::1 . local in fibtype6
FAIL: fib expression address types match (iif in vrf)
(fib errounously returns 'unicast' for all of them, even
though all of these addresses are local to the vrf).
Fixes: f6d0cbcf09 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee62ce7a1d ]
When enabling DMA mapping in page_pool, pages are kept DMA mapped until
they are released from the pool, to avoid the overhead of re-mapping the
pages every time they are used. This causes resource leaks and/or
crashes when there are pages still outstanding while the device is torn
down, because page_pool will attempt an unmap through a non-existent DMA
device on the subsequent page return.
To fix this, implement a simple tracking of outstanding DMA-mapped pages
in page pool using an xarray. This was first suggested by Mina[0], and
turns out to be fairly straight forward: We simply store pointers to
pages directly in the xarray with xa_alloc() when they are first DMA
mapped, and remove them from the array on unmap. Then, when a page pool
is torn down, it can simply walk the xarray and unmap all pages still
present there before returning, which also allows us to get rid of the
get/put_device() calls in page_pool. Using xa_cmpxchg(), no additional
synchronisation is needed, as a page will only ever be unmapped once.
To avoid having to walk the entire xarray on unmap to find the page
reference, we stash the ID assigned by xa_alloc() into the page
structure itself, using the upper bits of the pp_magic field. This
requires a couple of defines to avoid conflicting with the
POINTER_POISON_DELTA define, but this is all evaluated at compile-time,
so does not affect run-time performance. The bitmap calculations in this
patch gives the following number of bits for different architectures:
- 23 bits on 32-bit architectures
- 21 bits on PPC64 (because of the definition of ILLEGAL_POINTER_VALUE)
- 32 bits on other 64-bit architectures
Stashing a value into the unused bits of pp_magic does have the effect
that it can make the value stored there lie outside the unmappable
range (as governed by the mmap_min_addr sysctl), for architectures that
don't define ILLEGAL_POINTER_VALUE. This means that if one of the
pointers that is aliased to the pp_magic field (such as page->lru.next)
is dereferenced while the page is owned by page_pool, that could lead to
a dereference into userspace, which is a security concern. The risk of
this is mitigated by the fact that (a) we always clear pp_magic before
releasing a page from page_pool, and (b) this would need a
use-after-free bug for struct page, which can have many other risks
since page->lru.next is used as a generic list pointer in multiple
places in the kernel. As such, with this patch we take the position that
this risk is negligible in practice. For more discussion, see[1].
Since all the tracking added in this patch is performed on DMA
map/unmap, no additional code is needed in the fast path, meaning the
performance overhead of this tracking is negligible there. A
micro-benchmark shows that the total overhead of the tracking itself is
about 400 ns (39 cycles(tsc) 395.218 ns; sum for both map and unmap[2]).
Since this cost is only paid on DMA map and unmap, it seems like an
acceptable cost to fix the late unmap issue. Further optimisation can
narrow the cases where this cost is paid (for instance by eliding the
tracking when DMA map/unmap is a no-op).
The extra memory needed to track the pages is neatly encapsulated inside
xarray, which uses the 'struct xa_node' structure to track items. This
structure is 576 bytes long, with slots for 64 items, meaning that a
full node occurs only 9 bytes of overhead per slot it tracks (in
practice, it probably won't be this efficient, but in any case it should
be an acceptable overhead).
[0] https://lore.kernel.org/all/CAHS8izPg7B5DwKfSuzz-iOop_YRbk3Sd6Y4rX7KBG9DcVJcyWg@mail.gmail.com/
[1] https://lore.kernel.org/r/20250320023202.GA25514@openwall.com
[2] https://lore.kernel.org/r/ae07144c-9295-4c9d-a400-153bb689fe9e@huawei.com
Reported-by: Yonglong Liu <liuyonglong@huawei.com>
Closes: https://lore.kernel.org/r/8743264a-9700-4227-a556-5f931c720211@huawei.com
Fixes: ff7d6b27f8 ("page_pool: refurbish version of page_pool code")
Suggested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Tested-by: Jesper Dangaard Brouer <hawk@kernel.org>
Tested-by: Qiuling Ren <qren@redhat.com>
Tested-by: Yuying Ma <yuma@redhat.com>
Tested-by: Yonglong Liu <liuyonglong@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409-page-pool-track-dma-v9-2-6a9ef2e0cba8@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd3c93167d ]
Since we are about to stash some more information into the pp_magic
field, let's move the magic signature checks into a pair of helper
functions so it can be changed in one place.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: Yonglong Liu <liuyonglong@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409-page-pool-track-dma-v9-1-6a9ef2e0cba8@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47e36ed784 ]
Currently, to statically initialize the struct members of the `type`
object created by _DEFINE_FLEX(), the internal `obj` member must be
explicitly referenced at the call site. See:
struct flex {
int a;
int b;
struct foo flex_array[];
};
_DEFINE_FLEX(struct flex, instance, flex_array,
FIXED_SIZE, = {
.obj = {
.a = 0,
.b = 1,
},
});
This leaks _DEFINE_FLEX() internal implementation details and make
the helper harder to use and read.
Fix this and allow for a more natural and intuitive C99 init-style:
_DEFINE_FLEX(struct flex, instance, flex_array,
FIXED_SIZE, = {
.a = 0,
.b = 1,
});
Note that before these changes, the `initializer` argument was optional,
but now it's required.
Also, update "counter" member initialization in DEFINE_FLEX().
Fixes: 26dd68d293 ("overflow: add DEFINE_FLEX() for on-stack allocs")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/aBQVeyKfLOkO9Yss@kspp
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59529bbe64 ]
SDEI usually initialize with the ACPI table, but on platforms where
ACPI is not used, the SDEI feature can still be used to handle
specific firmware calls or other customized purposes. Therefore, it
is not necessary for ARM_SDE_INTERFACE to depend on ACPI_APEI_GHES.
In commit dc4e8c07e9 ("ACPI: APEI: explicit init of HEST and GHES
in acpi_init()"), to make APEI ready earlier, sdei_init was moved
into acpi_ghes_init instead of being a standalone initcall, adding
ACPI_APEI_GHES dependency to ARM_SDE_INTERFACE. This restricts the
flexibility and usability of SDEI.
This patch corrects the dependency in Kconfig and splits sdei_init()
into two separate functions: sdei_init() and acpi_sdei_init().
sdei_init() will be called by arch_initcall and will only initialize
the platform driver, while acpi_sdei_init() will initialize the
device from acpi_ghes_init() when ACPI is ready. This allows the
initialization of SDEI without ACPI_APEI_GHES enabled.
Fixes: dc4e8c07e9 ("ACPI: APEI: explicit init of HEST and GHES in apci_init()")
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250507045757.2658795-1-quic_hyiwei@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62f134ab19 ]
In commit d69d804845 ("driver core: have match() callback in struct
bus_type take a const *"), the match bus callback was changed to have
the driver be a const pointer. Unfortunately that const attribute was
thrown away when container_of() is called, which is not correct and was
not caught by the compiler due to how container_of() is implemented.
Fix this up by correctly preserving the const attribute of the driver
passed to the bus match function which requires the hdac_driver match
function to also take a const pointer for the driver structure.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Fixes: d69d804845 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052204-hyphen-thermal-3e72@gregkh
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcd21b609d ]
The Linux client assumes that all filehandles are non-volatile for
renames within the same directory (otherwise sillyrename cannot work).
However, the existence of the Linux 'subtree_check' export option has
meant that nfs_rename() has always assumed it needs to flush writes
before attempting to rename.
Since NFSv4 does allow the client to query whether or not the server
exhibits this behaviour, and since knfsd does actually set the
appropriate flag when 'subtree_check' is enabled on an export, it
should be OK to optimise away the write flushing behaviour in the cases
where it is clearly not needed.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b5325b2a27 upstream.
Give userspace a way to instruct the kernel to install a pidfd into the
usermode helper process. This makes coredump handling a lot more
reliable for userspace. In parallel with this commit we already have
systemd adding support for this in [1].
We create a pidfs file for the coredumping process when we process the
corename pattern. When the usermode helper process is forked we then
install the pidfs file as file descriptor three into the usermode
helpers file descriptor table so it's available to the exec'd program.
Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is empty
and can thus always use three as the file descriptor number.
Note, that we'll install a pidfd for the thread-group leader even if a
subthread is calling do_coredump(). We know that task linkage hasn't
been removed due to delay_group_leader() and even if this @current isn't
the actual thread-group leader we know that the thread-group leader
cannot be reaped until @current has exited.
[brauner: This is a backport for the v6.12 series. The upstream kernel
has changed pidfs_alloc_file() to set O_RDWR implicitly instead of
forcing callers to set it. Let's minimize the churn and just let the
coredump umh handler raise O_RDWR.]
Link: https://github.com/systemd/systemd/pull/37125 [1]
Link: https://lore.kernel.org/20250414-work-coredump-v2-3-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8260731cca upstream.
Test struct drm_gem_object.import_attach to detect imported objects.
During object clenanup, the dma_buf field might be NULL. Testing it in
an object's free callback then incorrectly does a cleanup as for native
objects. Happens for calls to drm_mode_destroy_dumb_ioctl() that
clears the dma_buf field in drm_gem_object_exported_dma_buf_free().
v3:
- only test for import_attach (Boris)
v2:
- use import_attach.dmabuf instead of dma_buf (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b57aa47d39 ("drm/gem: Test for imported GEM buffers with helper")
Reported-by: Andy Yan <andyshrk@163.com>
Closes: https://lore.kernel.org/dri-devel/38d09d34.4354.196379aa560.Coremail.andyshrk@163.com/
Tested-by: Andy Yan <andyshrk@163.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Anusha Srivatsa <asrivats@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250416065820.26076-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18311a766c upstream.
Since IOMEM_ERR_PTR() macro deals with an error pointer, a better place
for it is err.h. This helps avoid dependency on io.h for the users that
don't need it.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1007ae0d46 ]
Some places in the spi core pass in a const pointer to a device and the
default container_of() casts that away, which is not a good idea.
Preserve the proper const attribute by using container_of_const() for
to_spi_device() instead, which is what it was designed for.
Note, this removes the NULL check for a device pointer in the call, but
no one was ever checking for that return value, and a device pointer
should never be NULL overall anyway, so this should be a safe change.
Cc: Mark Brown <broonie@kernel.org>
Fixes: d69d804845 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052230-fidgeting-stooge-66f5@gregkh
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7190b3c8bd upstream.
commit c4608d1bf7 ("mm: mmap: map MAP_STACK to VM_NOHUGEPAGE") maps the
mmap option MAP_STACK to VM_NOHUGEPAGE. This is also done if
CONFIG_TRANSPARENT_HUGEPAGE is not defined. But in that case, the
VM_NOHUGEPAGE does not make sense.
I discovered this issue when trying to use the tool CRIU to checkpoint and
restore a container. Our running kernel is compiled without
CONFIG_TRANSPARENT_HUGEPAGE. CRIU parses the output of /proc/<pid>/smaps
and saves the "nh" flag. When trying to restore the container, CRIU fails
to restore the "nh" mappings, since madvise() MADV_NOHUGEPAGE always
returns an error because CONFIG_TRANSPARENT_HUGEPAGE is not defined.
Link: https://lkml.kernel.org/r/20250507-map-map_stack-to-vm_nohugepage-only-if-thp-is-enabled-v5-1-c6c38cfefd6e@kuka.com
Fixes: c4608d1bf7 ("mm: mmap: map MAP_STACK to VM_NOHUGEPAGE")
Signed-off-by: Ignacio Moreno Gonzalez <Ignacio.MorenoGonzalez@kuka.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97dfbbd135 upstream.
In commit c749d9b7eb ("iov_iter: fix copy_page_from_iter_atomic() if
KMAP_LOCAL_FORCE_MAP"), Hugh correctly noted that if KMAP_LOCAL_FORCE_MAP
is enabled, we must limit ourselves to PAGE_SIZE bytes per call to
kmap_local(). The same problem exists in memcpy_from_folio(),
memcpy_to_folio(), folio_zero_tail(), folio_fill_tail() and
memcpy_from_file_folio(), so add folio_test_partial_kmap() to do this more
succinctly.
Link: https://lkml.kernel.org/r/20250514170607.3000994-2-willy@infradead.org
Fixes: 00cdf76012 ("mm: add memcpy_from_file_folio()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93a81ca065 upstream.
The PCM OSS layer tries to clear the buffer with the silence data at
initialization (or reconfiguration) of a stream with the explicit call
of snd_pcm_format_set_silence() with runtime->dma_area. But this may
lead to a UAF because the accessed runtime->dma_area might be freed
concurrently, as it's performed outside the PCM ops.
For avoiding it, move the code into the PCM core and perform it inside
the buffer access lock, so that it won't be changed during the
operation.
Reported-by: syzbot+32d4647f551007595173@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/68164d8e.050a0220.11da1b.0019.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250516080817.20068-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a21cad9312 ]
device.h is a huge header which is hard to follow and easy to miss
something. Improve that by splitting devres APIs to device/devres.h.
In particular this helps to speedup the build of the code that includes
device.h solely for a devres APIs.
While at it, cast the error pointers to __iomem using IOMEM_ERR_PTR()
and fix sparse warnings.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 7dd7f39fce ("ASoC: SOF: Intel: hda: Fix UAF when reloading module")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 028363685b ]
The current scheme for caching the encap socket can lead to reference
leaks when we try to delete the netns.
The reference chain is: xfrm_state -> enacp_sk -> netns
Since the encap socket is a userspace socket, it holds a reference on
the netns. If we delete the espintcp state (through flush or
individual delete) before removing the netns, the reference on the
socket is dropped and the netns is correctly deleted. Otherwise, the
netns may not be reachable anymore (if all processes within the ns
have terminated), so we cannot delete the xfrm state to drop its
reference on the socket.
This patch results in a small (~2% in my tests) performance
regression.
A GC-type mechanism could be added for the socket cache, to clear
references if the state hasn't been used "recently", but it's a lot
more complex than just not caching the socket.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5e3306a42 ]
msm is automagically upgrading normal commits to full modesets, and
that's a big no-no:
- for one this results in full on->off->on transitions on all these
crtc, at least if you're using the usual helpers. Which seems to be
the case, and is breaking uapi
- further even if the ctm change itself would not result in flicker,
this can hide modesets for other reasons. Which again breaks the
uapi
v2: I forgot the case of adding unrelated crtc state. Add that case
and link to the existing kerneldoc explainers. This has come up in an
irc discussion with Manasi and Ville about intel's bigjoiner mode.
Also cc everyone involved in the msm irc discussion, more people
joined after I sent out v1.
v3: Wording polish from Pekka and Thomas
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Simona Vetter <simona.vetter@intel.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108172417.160831-1-simona.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ce939a0fa ]
The event may have been updated in the PMU-specific implementation,
e.g., Intel PEBS counters snapshotting. The common code should not
read and overwrite the value.
The PERF_SAMPLE_READ in the data->sample_type can be used to detect
whether the PMU-specific value is available. If yes, avoid the
pmu->read() in the common code. Add a new flag, skip_read, to track the
case.
Factor out a perf_pmu_read() to clean up the code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250121152303.3128733-3-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad6b5b73ff ]
rcu_all_qs() is defined for !CONFIG_PREEMPT_RCU but the declaration
is conditioned on CONFIG_PREEMPTION.
With CONFIG_PREEMPT_LAZY, CONFIG_PREEMPTION=y does not imply
CONFIG_PREEMPT_RCU=y.
Decouple the two.
Cc: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcf0e25ad4 ]
rcu_read_unlock_strict() can be called with preemption enabled
which can make for an unstable rdp and a racy norm value.
Fix this by dropping the preempt-count in __rcu_read_unlock()
after the call to rcu_read_unlock_strict(), adjusting the
preempt-count check appropriately.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
