[ Upstream commit 0185c2292c ]
In our user safe ino resolve ioctl we'll just turn any ret into -EACCES
from inode_permission(). This is redundant, and could potentially be
wrong if we had an ENOMEM in the security layer or some such other
error, so simply return the actual return value.
Note: The patch was taken from v5 of fscrypt patchset
(https://lore.kernel.org/linux-btrfs/cover.1706116485.git.josef@toxicpanda.com/)
which was handled over time by various people: Omar Sandoval, Sweet Tea
Dorminy, Josef Bacik.
Fixes: 23d0b79dfa ("btrfs: Add unprivileged version of ino_lookup ioctl")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note ]
Signed-off-by: David Sterba <dsterba@suse.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6abfe10789 ]
Copying the file system while it is mounted as read-only results in
a mount failure:
[~]# mkfs.ext4 -F /dev/sdc
[~]# mount /dev/sdc -o ro /mnt/test
[~]# dd if=/dev/sdc of=/dev/sda bs=1M
[~]# mount /dev/sda /mnt/test1
[ 1094.849826] JBD2: journal checksum error
[ 1094.850927] EXT4-fs (sda): Could not load journal inode
mount: mount /dev/sda on /mnt/test1 failed: Bad message
The process described above is just an abstracted way I came up with to
reproduce the issue. In the actual scenario, the file system was mounted
read-only and then copied while it was still mounted. It was found that
the mount operation failed. The user intended to verify the data or use
it as a backup, and this action was performed during a version upgrade.
Above issue may happen as follows:
ext4_fill_super
set_journal_csum_feature_set(sb)
if (ext4_has_metadata_csum(sb))
incompat = JBD2_FEATURE_INCOMPAT_CSUM_V3;
if (test_opt(sb, JOURNAL_CHECKSUM)
jbd2_journal_set_features(sbi->s_journal, compat, 0, incompat);
lock_buffer(journal->j_sb_buffer);
sb->s_feature_incompat |= cpu_to_be32(incompat);
//The data in the journal sb was modified, but the checksum was not
updated, so the data remaining in memory has a mismatch between the
data and the checksum.
unlock_buffer(journal->j_sb_buffer);
In this case, the journal sb copied over is in a state where the checksum
and data are inconsistent, so mounting fails.
To solve the above issue, update the checksum in memory after modifying
the journal sb.
Fixes: 4fd5ea43bc ("jbd2: checksum journal superblock")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251103010123.3753631-1-yebin@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
[ Changed jbd2_superblock_csum(sb) to jbd2_superblock_csum(journal, sb) ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f941b2c23 upstream.
In error path, call drop_client() to drop the reference
obtained by get_nfsdfs_clp().
Fixes: 78599c42ae ("nfsd4: add file to display list of client's opens")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebae102897 upstream.
Clang is not happy about set but (in some cases) unused variable:
fs/nfsd/export.c:1027:17: error: variable 'inode' set but not used [-Werror,-Wunused-but-set-variable]
since it's used as a parameter to dprintk() which might be configured
a no-op. To avoid uglifying code with the specific ifdeffery just mark
the variable __maybe_unused.
The commit [1], which introduced this behaviour, is quite old and hence
the Fixes tag points to the first of the Git era.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=0431923fb7a1 [1]
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 635bc4def0 upstream.
inotify/fanotify do not allow users with no read access to a file to
subscribe to events (e.g. IN_ACCESS/IN_MODIFY), but they do allow the
same user to subscribe for watching events on children when the user
has access to the parent directory (e.g. /dev).
Users with no read access to a file but with read access to its parent
directory can still stat the file and see if it was accessed/modified
via atime/mtime change.
The same is not true for special files (e.g. /dev/null). Users will not
generally observe atime/mtime changes when other users read/write to
special files, only when someone sets atime/mtime via utimensat().
Align fsnotify events with this stat behavior and do not generate
ACCESS/MODIFY events to parent watchers on read/write of special files.
The events are still generated to parent watchers on utimensat(). This
closes some side-channels that could be possibly used for information
exfiltration [1].
[1] https://snee.la/pdf/pubs/file-notification-attacks.pdf
Reported-by: Sudheendra Raghav Neela <sneela@tugraz.at>
CC: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 039bef30e3 upstream.
syzbot reported a kernel BUG in ocfs2_find_victim_chain() because the
`cl_next_free_rec` field of the allocation chain list (next free slot in
the chain list) is 0, triggring the BUG_ON(!cl->cl_next_free_rec)
condition in ocfs2_find_victim_chain() and panicking the kernel.
To fix this, an if condition is introduced in ocfs2_claim_suballoc_bits(),
just before calling ocfs2_find_victim_chain(), the code block in it being
executed when either of the following conditions is true:
1. `cl_next_free_rec` is equal to 0, indicating that there are no free
chains in the allocation chain list
2. `cl_next_free_rec` is greater than `cl_count` (the total number of
chains in the allocation chain list)
Either of them being true is indicative of the fact that there are no
chains left for usage.
This is addressed using ocfs2_error(), which prints
the error log for debugging purposes, rather than panicking the kernel.
Link: https://lkml.kernel.org/r/20251201130711.143900-1-activprithvi@gmail.com
Signed-off-by: Prithvi Tambewagh <activprithvi@gmail.com>
Reported-by: syzbot+96d38c6e1655c1420a72@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=96d38c6e1655c1420a72
Tested-by: syzbot+96d38c6e1655c1420a72@syzkaller.appspotmail.com
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01fba45dea upstream.
With below scripts, it will trigger panic in f2fs:
mkfs.f2fs -f /dev/vdd
mount /dev/vdd /mnt/f2fs
touch /mnt/f2fs/foo
sync
echo 111 >> /mnt/f2fs/foo
f2fs_io fsync /mnt/f2fs/foo
f2fs_io shutdown 2 /mnt/f2fs
umount /mnt/f2fs
mount -o ro,norecovery /dev/vdd /mnt/f2fs
or
mount -o ro,disable_roll_forward /dev/vdd /mnt/f2fs
F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 0
F2FS-fs (vdd): Mounted with checkpoint version = 7f5c361f
F2FS-fs (vdd): Stopped filesystem due to reason: 0
F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 1
Filesystem f2fs get_tree() didn't set fc->root, returned 1
------------[ cut here ]------------
kernel BUG at fs/super.c:1761!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 722 Comm: mount Not tainted 6.18.0-rc2+ #721 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:vfs_get_tree.cold+0x18/0x1a
Call Trace:
<TASK>
fc_mount+0x13/0xa0
path_mount+0x34e/0xc50
__x64_sys_mount+0x121/0x150
do_syscall_64+0x84/0x800
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fa6cc126cfe
The root cause is we missed to handle error number returned from
f2fs_recover_fsync_data() when mounting image w/ ro,norecovery or
ro,disable_roll_forward mount option, result in returning a positive
error number to vfs_get_tree(), fix it.
Cc: stable@kernel.org
Fixes: 6781eabba1 ("f2fs: give -EINVAL for norecovery and rw mount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d33f89b34a upstream.
F2FS can mount filesystems with corrupted directory depth values that
get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT
operations are performed on such directories, f2fs_rename performs
directory modifications (updating target entry and deleting source
entry) before attempting to add the whiteout entry via f2fs_add_link.
If f2fs_add_link fails due to the corrupted directory structure, the
function returns an error to VFS, but the partial directory
modifications have already been committed to disk. VFS assumes the
entire rename operation failed and does not update the dentry cache,
leaving stale mappings.
In the error path, VFS does not call d_move() to update the dentry
cache. This results in new_dentry still pointing to the old inode
(new_inode) which has already had its i_nlink decremented to zero.
The stale cache causes subsequent operations to incorrectly reference
the freed inode.
This causes subsequent operations to use cached dentry information that
no longer matches the on-disk state. When a second rename targets the
same entry, VFS attempts to decrement i_nlink on the stale inode, which
may already have i_nlink=0, triggering a WARNING in drop_nlink().
Example sequence:
1. First rename (RENAME_WHITEOUT): file2 → file1
- f2fs updates file1 entry on disk (points to inode 8)
- f2fs deletes file2 entry on disk
- f2fs_add_link(whiteout) fails (corrupted directory)
- Returns error to VFS
- VFS does not call d_move() due to error
- VFS cache still has: file1 → inode 7 (stale!)
- inode 7 has i_nlink=0 (already decremented)
2. Second rename: file3 → file1
- VFS uses stale cache: file1 → inode 7
- Tries to drop_nlink on inode 7 (i_nlink already 0)
- WARNING in drop_nlink()
Fix this by explicitly invalidating old_dentry and new_dentry when
f2fs_add_link fails during whiteout creation. This forces VFS to
refresh from disk on subsequent operations, ensuring cache consistency
even when the rename partially succeeds.
Reproducer:
1. Mount F2FS image with corrupted i_current_depth
2. renameat2(file2, file1, RENAME_WHITEOUT)
3. renameat2(file3, file1, 0)
4. System triggers WARNING in drop_nlink()
Fixes: 7e01e7ad74 ("f2fs: support RENAME_WHITEOUT")
Reported-by: syzbot+632cf32276a9a564188d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=632cf32276a9a564188d
Suggested-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/all/20251022233349.102728-1-kartikey406@gmail.com/ [v1]
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f52063db9 upstream.
The reservation type argument for the pr_preempt call should match the
one used in nfsd4_block_get_device_info_scsi.
Fixes: f99d4fbdae ("nfsd: add SCSI layout support")
Cc: stable@vger.kernel.org
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40a71b53d5 upstream.
jbd2 journal handling code doesn't want jbd2_might_wait_for_commit()
to be placed between start_this_handle() and stop_this_handle(). So it
marks the region with rwsem_acquire_read() and rwsem_release().
However, the annotation is too strong for that purpose. We don't have
to use more than try lock annotation for that.
rwsem_acquire_read() implies:
1. might be a waiter on contention of the lock.
2. enter to the critical section of the lock.
All we need in here is to act 2, not 1. So trylock version of
annotation is sufficient for that purpose. Now that dept partially
relies on lockdep annotaions, dept interpets rwsem_acquire_read() as a
potential wait and might report a deadlock by the wait.
Replace it with trylock version of annotation.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Message-ID: <20251024073940.1063-1-byungchul@sk.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c11c56eb3 upstream.
Kernel commit 0a6ce20c15 ("ext4: verify orphan file size is not too big")
limits the maximum supported orphan file size to 8 << 20.
However, in e2fsprogs, the orphan file size is set to 32–512 filesystem
blocks when creating a filesystem.
With 64k block size, formatting an ext4 fs >32G gives an orphan file bigger
than the kernel allows, so mount prints an error and fails:
EXT4-fs (vdb): orphan file too big: 8650752
EXT4-fs (vdb): mount failed
To prevent this issue and allow previously created 64KB filesystems to
mount, we updates the maximum allowed orphan file size in the kernel to
512 filesystem blocks.
Fixes: 0a6ce20c15 ("ext4: verify orphan file size is not too big")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251120134233.2994147-1-libaokun@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f7a79d05c upstream.
When the MB_CHECK_ASSERT macro is enabled, an assertion failure can
occur in __mb_check_buddy when checking preallocated blocks (pa) in
a block group:
Assertion failure in mb_free_blocks() : "groupnr == e4b->bd_group"
This happens when a pa at the very end of a block group (e.g.,
pa_pstart=32765, pa_len=3 in a group of 32768 blocks) becomes
exhausted - its pa_pstart is advanced by pa_len to 32768, which
lies in the next block group. If this exhausted pa (with pa_len == 0)
is still in the bb_prealloc_list during the buddy check, the assertion
incorrectly flags it as belonging to the wrong group. A possible
sequence is as follows:
ext4_mb_new_blocks
ext4_mb_release_context
pa->pa_pstart += EXT4_C2B(sbi, ac->ac_b_ex.fe_len)
pa->pa_len -= ac->ac_b_ex.fe_len
__mb_check_buddy
for each pa in group
ext4_get_group_no_and_offset
MB_CHECK_ASSERT(groupnr == e4b->bd_group)
To fix this, we modify the check to skip block group validation for
exhausted preallocations (where pa_len == 0). Such entries are in a
transitional state and will be removed from the list soon, so they
should not trigger an assertion. This change prevents the false
positive while maintaining the integrity of the checks for active
allocations.
Fixes: c9de560ded ("ext4: Add multi block allocator for ext4")
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251106060614.631382-2-sunyongjian@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4091c8206c upstream.
i_state_flags used on 32-bit archs, need to clear this flag when
alloc inode.
Find this issue when umount ext4, sometimes track the inode as orphan
accidently, cause ext4 mesg dump.
Fixes: acf943e976 ("ext4: fix checks for orphan inodes")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251104-ext4-v1-1-73691a0800f9@nxp.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b97cb7d6a0 upstream.
If ext4_get_inode_loc() fails (e.g. if it returns -EFSCORRUPTED),
iloc.bh will remain set to NULL. Since ext4_xattr_inode_dec_ref_all()
lacks error checking, this will lead to a null pointer dereference
in ext4_raw_inode(), called right after ext4_get_inode_loc().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c8e008b604 ("ext4: ignore xattrs past end")
Cc: stable@kernel.org
Signed-off-by: Karina Yankevich <k.yankevich@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Message-ID: <20251022093253.3546296-1-k.yankevich@omp.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 801f614ba2 upstream.
Some NTFS volumes failed to mount because sparse data runs were not
handled correctly during runlist unpacking. The code performed arithmetic
on the special SPARSE_LCN64 marker, leading to invalid LCN values and
mount errors.
Add an explicit check for the case described above, marking the run as
sparse without applying arithmetic.
Fixes: 736fc7bf5f ("fs: ntfs3: Fix integer overflow in run_unpack()")
Cc: stable@vger.kernel.org
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 51fc7b4ce1 ]
The kernel test robot reported that the exFAT remount operation
failed. The reason for the failure was that the process's umask
is different between mount and remount, causing fs_fmask and
fs_dmask are changed.
Potentially, both gid and uid may also be changed. Therefore, when
initializing fs_context for remount, inherit these mount options
from the options used during mount.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202511251637.81670f5c-lkp@intel.com
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54df8b80cc ]
[BUG]
When a scrub failed immediately without any byte scrubbed, the returned
btrfs_scrub_progress::last_physical will always be 0, even if there is a
non-zero @start passed into btrfs_scrub_dev() for resume cases.
This will reset the progress and make later scrub resume start from the
beginning.
[CAUSE]
The function btrfs_scrub_dev() accepts a @progress parameter to copy its
updated progress to the caller, there are cases where we either don't
touch progress::last_physical at all or copy 0 into last_physical:
- last_physical not updated at all
If some error happened before scrubbing any super block or chunk, we
will not copy the progress, leaving the @last_physical untouched.
E.g. failed to allocate @sctx, scrubbing a missing device or even
there is already a running scrub and so on.
All those cases won't touch @progress at all, resulting the
last_physical untouched and will be left as 0 for most cases.
- Error out before scrubbing any bytes
In those case we allocated @sctx, and sctx->stat.last_physical is all
zero (initialized by kvzalloc()).
Unfortunately some critical errors happened during
scrub_enumerate_chunks() or scrub_supers() before any stripe is really
scrubbed.
In that case although we will copy sctx->stat back to @progress, since
no byte is really scrubbed, last_physical will be overwritten to 0.
[FIX]
Make sure the parameter @progress always has its @last_physical member
updated to @start parameter inside btrfs_scrub_dev().
At the very beginning of the function, set @progress->last_physical to
@start, so that even if we error out without doing progress copying,
last_physical is still at @start.
Then after we got @sctx allocated, set sctx->stat.last_physical to
@start, this will make sure even if we didn't get any byte scrubbed, at
the progress copying stage the @last_physical is not left as zero.
This should resolve the resume progress reset problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24e17a29cf ]
The xfstests' test-case generic/073 leaves HFS+ volume
in corrupted state:
sudo ./check generic/073
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.17.0-rc1+ #4 SMP PREEMPT_DYNAMIC Wed Oct 1 15:02:44 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/073 _check_generic_filesystem: filesystem on /dev/loop51 is inconsistent
(see XFSTESTS-2/xfstests-dev/results//generic/073.full for details)
Ran: generic/073
Failures: generic/073
Failed 1 of 1 tests
sudo fsck.hfsplus -d /dev/loop51
** /dev/loop51
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
Invalid directory item count
(It should be 1 instead of 0)
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
Verify Status: VIStat = 0x0000, ABTStat = 0x0000 EBTStat = 0x0000
CBTStat = 0x0000 CatStat = 0x00004000
** Repairing volume.
** Rechecking volume.
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume untitled was repaired successfully.
The test is doing these steps on final phase:
mv $SCRATCH_MNT/testdir_1/bar $SCRATCH_MNT/testdir_2/bar
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir_1
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo
So, we move file bar from testdir_1 into testdir_2 folder. It means that HFS+
logic decrements the number of entries in testdir_1 and increments number of
entries in testdir_2. Finally, we do fsync only for testdir_1 and foo but not
for testdir_2. As a result, this is the reason why fsck.hfsplus detects the
volume corruption afterwards.
This patch fixes the issue by means of adding the
hfsplus_cat_write_inode() call for old_dir and new_dir in
hfsplus_rename() after the successful ending of
hfsplus_rename_cat(). This method makes modification of in-core
inode objects for old_dir and new_dir but it doesn't save these
modifications in Catalog File's entries. It was expected that
hfsplus_write_inode() will save these modifications afterwards.
However, because generic/073 does fsync only for testdir_1 and foo
then testdir_2 modification hasn't beed saved into Catalog File's
entry and it was flushed without this modification. And it was
detected by fsck.hfsplus. Now, hfsplus_rename() stores in Catalog
File all modified entries and correct state of Catalog File will
be flushed during hfsplus_file_fsync() call. Finally, it makes
fsck.hfsplus happy.
sudo ./check generic/073
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.18.0-rc3+ #93 SMP PREEMPT_DYNAMIC Wed Nov 12 14:37:49 PST 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/073 32s ... 32s
Ran: generic/073
Passed all 1 tests
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20251112232522.814038-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 152af11428 ]
When sync() and link() are called concurrently, both threads may
enter hfs_bnode_find() without finding the node in the hash table
and proceed to create it.
Thread A:
hfsplus_write_inode()
-> hfsplus_write_system_inode()
-> hfs_btree_write()
-> hfs_bnode_find(tree, 0)
-> __hfs_bnode_create(tree, 0)
Thread B:
hfsplus_create_cat()
-> hfs_brec_insert()
-> hfs_bnode_split()
-> hfs_bmap_alloc()
-> hfs_bnode_find(tree, 0)
-> __hfs_bnode_create(tree, 0)
In this case, thread A creates the bnode, sets refcnt=1, and hashes it.
Thread B also tries to create the same bnode, notices it has already
been inserted, drops its own instance, and uses the hashed one without
getting the node.
```
node2 = hfs_bnode_findhash(tree, cnid);
if (!node2) { <- Thread A
hash = hfs_bnode_hash(cnid);
node->next_hash = tree->node_hash[hash];
tree->node_hash[hash] = node;
tree->node_hash_cnt++;
} else { <- Thread B
spin_unlock(&tree->hash_lock);
kfree(node);
wait_event(node2->lock_wq,
!test_bit(HFS_BNODE_NEW, &node2->flags));
return node2;
}
```
However, hfs_bnode_find() requires each call to take a reference.
Here both threads end up setting refcnt=1. When they later put the node,
this triggers:
BUG_ON(!atomic_read(&node->refcnt))
In this scenario, Thread B in fact finds the node in the hash table
rather than creating a new one, and thus must take a reference.
Fix this by calling hfs_bnode_get() when reusing a bnode newly created by
another thread to ensure the refcount is updated correctly.
A similar bug was fixed in HFS long ago in commit
a9dc087fd3 ("fix missing hfs_bnode_get() in __hfs_bnode_create")
but the same issue remained in HFS+ until now.
Reported-by: syzbot+005d2a9ecd9fbf525f6a@syzkaller.appspotmail.com
Signed-off-by: Yang Chenzhi <yang.chenzhi@vivo.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20250829093912.611853-1-yang.chenzhi@vivo.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed490f36f4 ]
The xfstests' test-case generic/070 leaves HFS+ volume
in corrupted state:
sudo ./check generic/070
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.17.0-rc1+ #4 SMP PREEMPT_DYNAMIC Wed Oct 1 15:02:44 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/070 _check_generic_filesystem: filesystem on /dev/loop50 is inconsistent
(see xfstests-dev/results//generic/070.full for details)
Ran: generic/070
Failures: generic/070
Failed 1 of 1 tests
sudo fsck.hfsplus -d /dev/loop50
** /dev/loop50
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking non-journaled HFS Plus Volume.
The volume name is test
** Checking extents overflow file.
Unused node is not erased (node = 1)
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
Verify Status: VIStat = 0x0000, ABTStat = 0x0000 EBTStat = 0x0004
CBTStat = 0x0000 CatStat = 0x00000000
** Repairing volume.
** Rechecking volume.
** Checking non-journaled HFS Plus Volume.
The volume name is test
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume test was repaired successfully.
It is possible to see that fsck.hfsplus detected not
erased and unused node for the case of extents overflow file.
The HFS+ logic has special method that defines if the node
should be erased:
bool hfs_bnode_need_zeroout(struct hfs_btree *tree)
{
struct super_block *sb = tree->inode->i_sb;
struct hfsplus_sb_info *sbi = HFSPLUS_SB(sb);
const u32 volume_attr = be32_to_cpu(sbi->s_vhdr->attributes);
return tree->cnid == HFSPLUS_CAT_CNID &&
volume_attr & HFSPLUS_VOL_UNUSED_NODE_FIX;
}
However, it is possible to see that this method works
only for the case of catalog file. But debugging of the issue
has shown that HFSPLUS_VOL_UNUSED_NODE_FIX attribute has been
requested for the extents overflow file too:
catalog file
kernel: hfsplus: node 4, num_recs 0, flags 0x10
kernel: hfsplus: tree->cnid 4, volume_attr 0x80000800
extents overflow file
kernel: hfsplus: node 1, num_recs 0, flags 0x10
kernel: hfsplus: tree->cnid 3, volume_attr 0x80000800
This patch modifies the hfs_bnode_need_zeroout() by checking
only volume_attr but not the b-tree ID because node zeroing
can be requested for all HFS+ b-tree types.
sudo ./check generic/070
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.18.0-rc3+ #79 SMP PREEMPT_DYNAMIC Fri Oct 31 16:07:42 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/070 33s ... 34s
Ran: generic/070
Passed all 1 tests
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20251101001229.247432-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5180138604 ]
Before it used an unsigned 64-bit type, which prevented proper handling
of timestamps earlier than 1970-01-01. Switch to a signed 64-bit type to
support pre-epoch timestamps. The issue was caught by xfstests.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b57f2ddd28 ]
In open_seed_devices(), when find_fsid() fails and we're in DEGRADED
mode, a new fs_devices is allocated via alloc_fs_devices() but is never
added to the seed_list before returning. This contrasts with the normal
path where fs_devices is properly added via list_add().
If any error occurs later in read_one_dev() or btrfs_read_chunk_tree(),
the cleanup code iterates seed_list to free seed devices, but this
orphaned fs_devices is never found and never freed, causing a memory
leak. Any devices allocated via add_missing_dev() and attached to this
fs_devices are also leaked.
Fix this by adding the newly allocated fs_devices to seed_list in the
degraded path, consistent with the normal path.
Fixes: 5f37583569 ("Btrfs: move the missing device to its own fs device list")
Reported-by: syzbot+eadd98df8bceb15d7fed@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=eadd98df8bceb15d7fed
Tested-by: syzbot+eadd98df8bceb15d7fed@syzkaller.appspotmail.com
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2214ec4bf8 ]
In 'ocfs2_merge_rec_left()', do not reset 'left_path' to NULL after
move, thus allowing 'ocfs2_free_path()' to free it before return.
Link: https://lkml.kernel.org/r/20251205065159.392749-1-dmantipov@yandex.ru
Fixes: 677b975282 ("ocfs2: Add support for cross extent block")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reported-by: syzbot+cfc7cab3bb6eaa7c4de2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cfc7cab3bb6eaa7c4de2
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c36f9d7b28 ]
After commit 25524b6190 ("fs/nls: Fix utf16 to utf8 conversion"),
the return values of utf8_to_utf32() and utf32_to_utf8() are
inconsistent when encountering an error: utf8_to_utf32() returns -1,
while utf32_to_utf8() returns errno codes. Fix this inconsistency
by modifying utf8_to_utf32() to return errno codes as well.
Fixes: 25524b6190 ("fs/nls: Fix utf16 to utf8 conversion")
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251129111535.8984-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8675c69816 ]
When a filesystem is being automounted, it needs to preserve the
user-set superblock mount options, such as the "ro" flag.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Link: https://lore.kernel.org/all/20240604112636.236517-3-lilingfeng@huaweicloud.com/
Fixes: f2aedb713c ("NFS: Add fs_context support.")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e04143c86 ]
This isn't ever used by VFS now, and it couldn't even work. Any FS that
uses the SECURITY_LSM_NATIVE_LABELS flag needs to also process the
value returned back from the LSM, so it needs to do its
security_sb_set_mnt_opts() call on its own anyway.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Stable-dep-of: 8675c69816 ("NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0f8058f2c ]
Fixes a crash when layout is null during this call stack:
write_inode
-> nfs4_write_inode
-> pnfs_layoutcommit_inode
pnfs_set_layoutcommit relies on the lseg refcount to keep the layout
around. Need to clear NFS_INO_LAYOUTCOMMIT otherwise we might attempt
to reference a null layout.
Fixes: fe1cf9469d ("pNFS: Clear all layout segment state in pnfs_mark_layout_stateid_invalid")
Signed-off-by: Jonathan Curley <jcurley@purestorage.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 518c32a1bc ]
Ensure that the verifiers are initialised before calling
d_splice_alias() in nfs_atomic_open().
Reported-by: Michael Stoler <michael.stoler@vastdata.com>
Fixes: 809fd143de ("NFSv4: Ensure nfs_atomic_open set the dentry verifier on ENOENT")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ab5be4ac5 ]
Add capabilities to allow the NFS client to recognise when it is dealing
with case insensitive and case preserving filesystems.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable-dep-of: 518c32a1bc ("NFS: Initialise verifiers for visible dentries in nfs_atomic_open()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25524b6190 ]
Currently the function responsible for converting between utf16 and
utf8 strings will ignore any characters that cannot be converted. This
however also includes multi-byte characters that do not fit into the
provided string buffer.
This can cause problems if such a multi-byte character is followed by
a single-byte character. In such a case the multi-byte character might
be ignored when the provided string buffer is too small, but the
single-byte character might fit and is thus still copied into the
resulting string.
Fix this by stop filling the provided string buffer once a character
does not fit. In order to be able to do this extend utf32_to_utf8()
to return useful errno codes instead of -1.
Fixes: 74675a5850 ("NLS: update handling of Unicode")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251111131125.3379-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd4928ec79 ]
If a file removal races with another operation that updates its
attributes, then skip the change to nlink, and just mark the attributes
as being stale.
Reported-by: Aiden Lambert <alambert48@gatech.edu>
Fixes: 59a707b0d4 ("NFS: Ensure we revalidate the inode correctly after remove or rename")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c59366c20 ]
NFS unlink() (and rename over existing target) must determine if the
file is open, and must perform a "silly rename" instead of an unlink (or
before rename) if it is. Otherwise the client might hold a file open
which has been removed on the server.
Consequently if it determines that the file isn't open, it must block
any subsequent opens until the unlink/rename has been completed on the
server.
This is currently achieved by unhashing the dentry. This forces any
open attempt to the slow-path for lookup which will block on i_rwsem on
the directory until the unlink/rename completes. A future patch will
change the VFS to only get a shared lock on i_rwsem for unlink, so this
will no longer work.
Instead we introduce an explicit interlock. A special value is stored
in dentry->d_fsdata while the unlink/rename is running and
->d_revalidate blocks while that value is present. When ->d_revalidate
unblocks, the dentry will be invalid. This closes the race
without requiring exclusion on i_rwsem.
d_fsdata is already used in two different ways.
1/ an IS_ROOT directory dentry might have a "devname" stored in
d_fsdata. Such a dentry doesn't have a name and so cannot be the
target of unlink or rename. For safety we check if an old devname
is still stored, and remove it if it is.
2/ a dentry with DCACHE_NFSFS_RENAMED set will have a 'struct
nfs_unlinkdata' stored in d_fsdata. While this is set maydelete()
will fail, so an unlink or rename will never proceed on such
a dentry.
Neither of these can be in effect when a dentry is the target of unlink
or rename. So we can expect d_fsdata to be NULL, and store a special
value ((void*)1) which is given the name NFS_FSDATA_BLOCKED to indicate
that any lookup will be blocked.
The d_count() is incremented under d_lock() when a lookup finds the
dentry, so we check d_count() is low, and set NFS_FSDATA_BLOCKED under
the same lock to avoid any races.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: bd4928ec79 ("NFS: Avoid changing nlink when file removes and attribute updates race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9019fb391d ]
After the success of an operation such as rmdir() or unlink(), we expect
to add the dentry back to the dcache as an ordinary negative dentry.
However in NFS, unless it is labelled with the appropriate verifier for
the parent directory state, then nfs_lookup_revalidate will end up
discarding that dentry and forcing a new lookup.
The fix is to ensure that we relabel the dentry appropriately on
success.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: bd4928ec79 ("NFS: Avoid changing nlink when file removes and attribute updates race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9ee3ff810 ]
When the MB_CHECK_ASSERT macro is enabled, we found that the
current validation logic in __mb_check_buddy has a gap in
detecting certain invalid buddy states, particularly related
to order-0 (bitmap) bits.
The original logic consists of three steps:
1. Validates higher-order buddies: if a higher-order bit is
set, at most one of the two corresponding lower-order bits
may be free; if a higher-order bit is clear, both lower-order
bits must be allocated (and their bitmap bits must be 0).
2. For any set bit in order-0, ensures all corresponding
higher-order bits are not free.
3. Verifies that all preallocated blocks (pa) in the group
have pa_pstart within bounds and their bitmap bits marked as
allocated.
However, this approach fails to properly validate cases where
order-0 bits are incorrectly cleared (0), allowing some invalid
configurations to pass:
corrupt integral
order 3 1 1
order 2 1 1 1 1
order 1 1 1 1 1 1 1 1 1
order 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Here we get two adjacent free blocks at order-0 with inconsistent
higher-order state, and the right one shows the correct scenario.
The root cause is insufficient validation of order-0 zero bits.
To fix this and improve completeness without significant performance
cost, we refine the logic:
1. Maintain the top-down higher-order validation, but we no longer
check the cases where the higher-order bit is 0, as this case will
be covered in step 2.
2. Enhance order-0 checking by examining pairs of bits:
- If either bit in a pair is set (1), all corresponding
higher-order bits must not be free.
- If both bits are clear (0), then exactly one of the
corresponding higher-order bits must be free
3. Keep the preallocation (pa) validation unchanged.
This change closes the validation gap, ensuring illegal buddy states
involving order-0 are correctly detected, while removing redundant
checks and maintaining efficiency.
Fixes: c9de560ded ("ext4: Add multi block allocator for ext4")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251106060614.631382-3-sunyongjian@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccc4e86d1c ]
If a rb node with the same ino already exists in the rb tree, the newly
alloced mft_inode in ni_add_subrecord() will not have its memory cleaned
up, which leads to the memory leak issue reported by syzbot.
The best option to avoid this issue is to put the newly alloced mft node
when a rb node with the same ino already exists in the rb tree and return
the rb node found in the rb tree to the parent layer.
syzbot reported:
BUG: memory leak
unreferenced object 0xffff888110bef280 (size 128):
backtrace (crc 126a088f):
ni_add_subrecord+0x31/0x180 fs/ntfs3/frecord.c:317
ntfs_look_free_mft+0xf0/0x790 fs/ntfs3/fsntfs.c:715
BUG: memory leak
unreferenced object 0xffff888109093400 (size 1024):
backtrace (crc 7197c55e):
mi_init+0x2b/0x50 fs/ntfs3/record.c:105
mi_format_new+0x40/0x220 fs/ntfs3/record.c:422
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Reported-by: syzbot+3932ccb896e06f7414c9@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d78d1173a ]
After ntfs_look_free_mft() executes successfully, all subsequent code
that fails to execute must put mi.
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 451e45a0e6 ]
Function ni_ins_new_attr now returns ERR_PTR(err),
so we check it now in other functions like ni_expand_mft_list
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Stable-dep-of: 4d78d1173a ("fs/ntfs3: out1 also needs to put mi")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 071100ea0e ]
This argument helps in avoiding double locking
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Stable-dep-of: 4d78d1173a ("fs/ntfs3: out1 also needs to put mi")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6700eabb90 ]
Cleaning up dead code
Fix wrong comments
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Stable-dep-of: 4d78d1173a ("fs/ntfs3: out1 also needs to put mi")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3524b021b0 ]
The extent returned by the file system may have a smaller offset than
the segment offset requested by the client. In this case, the minimum
segment length must be checked against the requested range. Otherwise,
the client may not be able to continue the read/write operation.
Fixes: 8650b8a058 ("nfsd: pNFS block layout driver")
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a7d58845f ]
In '__ocfs2_move_extent()', relax 'BUG()' to 'ocfs2_error()' just
to avoid crashing the whole kernel due to a filesystem corruption.
Fixes: 8f603e567a ("Ocfs2/move_extents: move a range of extent.")
Link: https://lkml.kernel.org/r/20251009102349.181126-2-dmantipov@yandex.ru
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Closes: https://syzkaller.appspot.com/bug?extid=727d161855d11d81e411
Reported-by: syzbot+727d161855d11d81e411@syzkaller.appspotmail.com
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be99c62ac7 ]
After setting the inode mode of $Extend to a regular file, executing the
truncate system call will enter the do_truncate() routine, causing the
run_lock uninitialized error reported by syzbot.
Prior to patch 4e8011ffec, if the inode mode of $Extend was not set to
a regular file, the do_truncate() routine would not be entered.
Add the run_lock initialization when loading $Extend.
syzbot reported:
INFO: trying to register non-static key.
Call Trace:
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
assign_lock_key+0x133/0x150 kernel/locking/lockdep.c:984
register_lock_class+0x105/0x320 kernel/locking/lockdep.c:1299
__lock_acquire+0x99/0xd20 kernel/locking/lockdep.c:5112
lock_acquire+0x120/0x360 kernel/locking/lockdep.c:5868
down_write+0x96/0x1f0 kernel/locking/rwsem.c:1590
ntfs_set_size+0x140/0x200 fs/ntfs3/inode.c:860
ntfs_extend+0x1d9/0x970 fs/ntfs3/file.c:387
ntfs_setattr+0x2e8/0xbe0 fs/ntfs3/file.c:808
Fixes: 4e8011ffec ("ntfs3: pretend $Extend records as regular files")
Reported-by: syzbot+bdeb22a4b9a09ab9aa45@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bdeb22a4b9a09ab9aa45
Tested-by: syzbot+bdeb22a4b9a09ab9aa45@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2e5a3cea4 ]
The move extent operation should return -EOPNOTSUPP if any of the inodes
is a quota inode, rather than requiring both to be quota inodes.
Fixes: 02749a4c20 ("ext4: add ext4_is_quota_file()")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-2-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
