Driver allocates a large chunk of temporary buffer using kzalloc
to copy FW image. As there is no real need of this memory to be
physically contiguous, use vzalloc instead.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some cases it is required to capture minidump for iSCSI functions
as part of default minidump collection process. To enable this, firmware
exports it's capability and driver need to enable that capability
by issuing a mailbox command.
With this feature, firmware can provide additional iSCSI function's
minidump with smaller minidump capture mask (0x1f).
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include local headers files after kernel's header files.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the Marvel 88e1111 PHY only two SGMII modes are available, both
allowing only SGMII to copper mode (with or without clock). SGMII
to fiber mode is not supported. Make sure the fiber/copper registers
selector bits are cleared for selecting copper mode.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
48ed7b26fa ("ipv6: reject locally assigned nexthop addresses") is too
strict; it rejects following corner-case:
ip -6 route add default via fe80::1:2:3 dev eth1
[ where fe80::1:2:3 is assigned to a local interface, but not eth1 ]
Fix this by restricting search to given device if nh is linklocal.
Joint work with Hannes Frederic Sowa.
Fixes: 48ed7b26fa ("ipv6: reject locally assigned nexthop addresses")
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we transmit a fragmented skb, we may run into a race like the
following scenario (assume txq->cur_tx is next to txq->dirty_tx):
cpu 0 cpu 1
fec_enet_txq_submit_skb
reserve a bdp for the first fragment
fec_enet_txq_submit_frag_skb
update the bdp for the other fragment
update txq->cur_tx
fec_enet_tx_queue
bdp = fec_enet_get_nextdesc(txq->dirty_tx, fep, queue_id);
This bdp is the bdp reserved for the first segment. Given
that this bdp BD_ENET_TX_READY bit is not set and txq->cur_tx
is already pointed to a bdp beyond this one. We think this is a
completed bdp and try to reclaim it.
update the bdp for the first segment
update txq->cur_tx
So we shouldn't update the txq->cur_tx until all the update to the
bdps used for fragments are performed. Also add the corresponding
memory barrier to guarantee that the update to the bdps, dirty_tx and
cur_tx performed in the proper order.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently perf evlist -F shows the number as if it's always sampling
frequency. But we now support per-event freq/period settings. So it'd
better to show more detailed info whether it's freq or period.
$ perf record -e 'cpu/config=1/,cpu/config=2,period=300000/' sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data ]
$ perf evlist -F
cpu/config=1/: sample_freq=4000
cpu/config=2,period=300000/: sample_period=300000
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1439102724-14079-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now perf can set per-event value of time and (sampling) period. But I
guess most users like me just want to set frequency rather than period.
So add the 'freq' term in the event parser.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1439102724-14079-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some cases it's useful to characterize samples by file. This is
useful to get a higher level categorization, for example to map cost to
subsystems.
Add a srcfile sort key to perf report. It builds on top of the existing
srcline support.
Commiter notes:
E.g.:
# perf record -F 10000 usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data (13 samples) ]
[root@zoo ~]# perf report -s srcfile --stdio
# Total Lost Samples: 0
#
# Samples: 13 of event 'cycles'
# Event count (approx.): 869878
#
# Overhead Source File
# ........ ...........
60.99% .
20.62% paravirt.h
14.23% rmap.c
4.04% signal.c
0.11% msr.h
#
The first line is collecting all the files for which srcfiles couldn't somehow
get resolved to:
# perf report -s srcfile,dso --stdio
# Total Lost Samples: 0
#
# Samples: 13 of event 'cycles'
# Event count (approx.): 869878
#
# Overhead Source File Shared Object
# ........ ........... ................
40.97% . ld-2.20.so
20.62% paravirt.h [kernel.vmlinux]
20.02% . libc-2.20.so
14.23% rmap.c [kernel.vmlinux]
4.04% signal.c [kernel.vmlinux]
0.11% msr.h [kernel.vmlinux]
#
XXX: Investigate why that is not resolving on Fedora 21, Andi says he hasn't
seen this on Fedora 22.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438988064-21834-1-git-send-email-andi@firstfloor.org
[ Added column length update, from 0e65bdb3f90f ('perf hists: Update the column width for the "srcline" sort key') ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we introduce a new sort key, we need to update the
hists__calc_col_len() function accordingly, otherwise the width
will be limited to strlen(header).
We can't update it when obtaining a line value for a column (for
instance, in sort__srcline_cmp()), because we reset it all when doing a
resort (see hists__output_recalc_col_len()), so we need to, from what is
in the hist_entry fields, set each of the column widths.
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Fixes: 409a8be615 ("perf tools: Add sort by src line/number")
Link: http://lkml.kernel.org/n/tip-jgbe0yx8v1gs89cslr93pvz2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 294ac32e99 "nfsd: protect clid and verifier generation with
client_lock" moved gen_confirm() to gen_clid().
After that commit, setclientid will return a bad reply with all-zero
verifier after copy_clid().
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If using clientid_counter, it seems possible that gen_confirm could
generate the same verifier for the same client in some situations.
Add a new counter for client confirm verifier to make sure gen_confirm
generates a different verifier on each call for the same clientid.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
v2, new helper nfs4_free_stateowner for freeing so_owner.data and sop
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Layout is a state resource, nfsd should check it too.
v2, drop unneeded updating in nfsd4_renew()
v3, fix compile error without CONFIG_NFSD_PNFS
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In later patches, we'll want to be able to allocate and free svc_rqst
structures without monkeying with the serv->sv_nrthreads refcount.
Factor those pieces out of their respective functions.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In later patches, we're going to need to allow code external to svc.c
to figure out what pool_mode is in use. Move these definitions into
svc.h to prepare for that.
Also, make the svc_pool_map object available and exported so that other
modules can peek in there to get insight into what pool mode is in use.
Likewise, export svc_pool_map_get/put function to make it safe to do so.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add an operation that will do setup of the service. In the case of a
classic thread-based service that means starting up threads. In the case
of a workqueue-based service, the setup will do something different.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirliey.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For now, all services use svc_xprt_do_enqueue, but once we add
workqueue-based service support, we'll need to do something different.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...not technically an operation, but it's more convenient and cleaner
to pass the module pointer in this struct.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since we now have a container for holding svc_serv operations, move the
sv_function into it as well.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In later patches we'll need to abstract out more operations on a
per-service level, besides sv_shutdown and sv_function.
Declare a new svc_serv_ops struct to hold these operations, and move
sv_shutdown into this struct.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Both commit 0380a3f375 ("svcrdma: Add a separate "max data segs"
macro for svcrdma") and commit 7e5be28827 ("svcrdma: advertise
the correct max payload") are incorrect. This commit reverts both
changes, restoring the server's maximum payload size to 1MB.
Commit 7e5be28827 based the server's maximum payload on the
_client's_ RPCRDMA_MAX_DATA_SEGS value. That was wrong.
Commit 0380a3f375 tried to fix this so that the client maximum
payload size could be raised without affecting the server, but
managed to confuse matters more on the server side.
More importantly, limiting the advertised maximum payload size was
meant to be a workaround, not the actual fix. We need to revisit
https://bugzilla.linux-nfs.org/show_bug.cgi?id=270
A Linux client on a platform with 64KB pages can overrun and crash
an x86_64 NFS/RDMA server when the r/wsize is 1MB. An x86/64 Linux
client seems to work fine using 1MB reads and writes when the Linux
server's maximum payload size is restored to 1MB.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=270
Fixes: 0380a3f375 ("svcrdma: Add a separate "max data segs" macro")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The iter_add_next_cumulative_entry() function calls hist_entry__cmp(),
which may want to access the hists where this hist_entry is stored,
initialize it to let that happen and avoid segfaults.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iqg98sfn4fvwcxp0pdvqauie@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, when trying to connect to already paired device that just
rotated its RPA MAC address, old address would be used and connection
would fail. In order to fix that, kernel must scan and receive
advertisement with fresh RPA before connecting.
This patch enables new connection establishment procedure. Instead of just
sending HCI_OP_LE_CREATE_CONN to controller, "connect" will add device to
kernel whitelist and start scan. If advertisement is received, it'll be
compared against whitelist and then trigger connection if it matches.
That fixes mentioned reconnect issue for already paired devices. It also
make whole connection procedure more robust. We can try to connect to
multiple devices at same time now, even though controller allow only one.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently, when trying to connect to already paired device that just
rotated its RPA MAC address, old address would be used and connection
would fail. In order to fix that, kernel must scan and receive
advertisement with fresh RPA before connecting.
This patch makes sure that when new procedure is in use, and we're stuck
in scan phase because no advertisement was received and timeout happened,
or app decided to close socket, scan whitelist gets properly cleaned up.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently, when trying to connect to already paired device that just
rotated its RPA MAC address, old address would be used and connection
would fail. In order to fix that, kernel must scan and receive
advertisement with fresh RPA before connecting.
This path makes sure that after advertisement is received from device that
we try to connect to, it is properly handled in check_pending_le_conn and
trigger connect attempt.
It also modifies hci_le_connect to make sure that connect attempt will be
properly continued.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently, when trying to connect to already paired device that just
rotated its RPA MAC address, old address would be used and connection
would fail. In order to fix that, kernel must scan and receive
advertisement with fresh RPA before connecting.
This patch adds hci_connect_le_scan with dependencies, new method that
will be used to connect to remote LE devices. Instead of just sending
connect request, it adds a device to whitelist. Later patches will make
use of this whitelist to send conenct request when advertisement is
received, and properly handle timeouts.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds hci_lookup_le_connect method, that will be used to check
wether outgoing le connection attempt is in progress.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently, when trying to connect to already paired device that just
rotated its RPA MAC address, old address would be used and connection
would fail. In order to fix that, kernel must scan and receive
advertisement with fresh RPA before connecting.
This patch adds some fields to hci_conn_params, in preparation to new
connect procedure.
explicit_connect will be used to override any current auto_connect action,
and connect to device when ad is received.
HCI_AUTO_CONN_EXPLICIT was added to auto_connect enum. When this value
will be used, explicit connect is the only action, and params can be
removed after successful connection.
HCI_CONN_SCANNING is added to hci_conn flags. When it's set, connect is
scan phase. It gets cleared when advertisement is received, and
HCI_OP_LE_CREATE_CONN is sent.
Signed-off-by: Jakub Pawlowski <jpawlowski@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
fill_zero can fail due to a lot of reason, but previously we do not handle
its return value, so its callers such as punch_hole/f2fs_zero_range may
report success, but actually can fail because of error occurs inside
fill_zero.
This patch fixes to report correct return value of fill_zero.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We queued interrupt events for the MRL being opened or closed, but the code
in interrupt_event_handler() that handles these events ignored them.
Stop enabling MRL interrupts and remove the ignored events.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The list of interrupt events (INT_BUTTON_IGNORE, INT_PRESENCE_ON, etc.) was
copied from other hotplug drivers, but pciehp doesn't use them all.
Remove the interrupt events that aren't used by pciehp.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
It's platform-dependent, but an MMIO read to a non-existent PCI device
generally returns data with all bits set. This happens when the host
bridge or Root Complex times out waiting for a response from the device and
fabricates return data to complete the CPU's read.
One example, reported in the bugzilla below, involved this hierarchy:
pci 0000:00:1c.0: PCI bridge to [bus 02-3a] Root Port
pci 0000:02:00.0: PCI bridge to [bus 03-0a] Upstream Port
pci 0000:03:03.0: PCI bridge to [bus 05-07] Downstream Port
pci 0000:05:00.0: PCI bridge to [bus 06-07] Thunderbolt Upstream Port
pci 0000:06:00.0: PCI bridge to [bus 07] Thunderbolt Downstream Port
pci 0000:07:00.0: BCM57762 NIC
Unplugging the Thunderbolt switch and the NIC below it resulted in this:
pciehp 0000:03:03.0: Surprise Removal
tg3 0000:07:00.0: tg3_abort_hw timed out, TX_MODE_ENABLE will not clear MAC_TX_MODE=ffffffff
pciehp 0000:06:00.0: unloading service driver pciehp
pciehp 0000:06:00.0: pcie_isr: intr_loc 11f
pciehp 0000:06:00.0: Switch interrupt received
pciehp 0000:06:00.0: Latch open on Slot
pciehp 0000:06:00.0: Attention button interrupt received
pciehp 0000:06:00.0: Button pressed on Slot
pciehp 0000:06:00.0: Presence/Notify input change
pciehp 0000:06:00.0: Card present on Slot
pciehp 0000:06:00.0: Power fault interrupt received
pciehp 0000:06:00.0: Data Link Layer State change
pciehp 0000:06:00.0: Link Up event
The pciehp driver correctly noticed that the Thunderbolt switch (05:00.0
and 06:00.0) and NIC (07:00.0) had been removed, and it called their driver
remove methods.
Since the NIC was already gone, tg3 received 0xffffffff when it tried to
read from the device. The resulting timeout is a tg3 issue and not of
interest here.
Similarly, since the 06:00.0 Thunderbolt switch was already gone,
pcie_isr() received 0xffff when it tried to read PCI_EXP_SLTSTA, and pciehp
thought that was valid status showing that many events had happened: the
latch had been opened, the attention button had been pressed, a card was
now present, and the link was now up. These are all wrong, of course, but
pciehp went on to try to power up and enumerate devices below the
non-existent bridge:
pciehp 0000:06:00.0: PCI slot - powering on due to button press
pciehp 0000:06:00.0: Surprise Insertion
pci 0000:07:00.0 id reading try 50 times with interval 20 ms to get ffffffff
[bhelgaas: changelog, also check in pcie_poll_cmd() & pcie_do_write_cmd()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99841
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Make ath_opmode_to_string return "OCB" for NL80211_IFTYPE_OCB. Currently
it will return "UNKNOWN".
Signed-off-by: Bertold Van den Bergh <bertold.vandenbergh@esat.kuleuven.be>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
bus->host_pdev is part of a union so bus->host_pdev != NULL is probably
also true for PCIe devices, because there it accesses bus->host_pci. If
we access the dev member at the offset defined in struct
platform_device in struct pci_dev instead we probably get something
else.
This patch adds a new function which returns the host dev struct and
NULL if we do not have a host dev. When this gets registered on MIPS
brcm47xx we do not have a host dev in some situations.
This function could also be used in other places.
This problem was introduced in this commit:
commit cae761b5a6
Author: Rafa? Mi?ecki <zajec5@gmail.com>
Date: Sun Jun 28 17:17:13 2015 +0200
bcma: populate bus DT subnodes as platform_device-s
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
mac80211 requires that rx path does not run concurrently with
tx status reporting. Add a spinlock which will ensure that.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
mac80211 requires that rx path does not run concurrently with
tx status reporting. Since rx path is run in driver tasklet,
tx status cannot be reported directly from interrupt context
(there would be no way to lock it out).
Add tasklet for tx and move all possible code from irq handler
there.
Note: tx tasklet is needed because workqueue is queued very
rarely and that kills TCP performance.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
