Commit graph

546,481 commits

Author SHA1 Message Date
Lars-Peter Clausen
3054716d4f ASoC: max9850: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-18 04:46:56 +01:00
Lars-Peter Clausen
1179a36850 ASoC: max98095: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-18 04:46:56 +01:00
Lars-Peter Clausen
29ca43bc54 ASoC: max98090: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level() and all other
manual access to codec->dapm with snd_soc_codec_get_dapm().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-18 04:46:56 +01:00
Lars-Peter Clausen
b0b80c8075 ASoC: max98090: Remove unnecessary snd_soc_dapm_sync()
max98090_jack_work() doesn't modify the DAPM graph other than what's done
in snd_soc_jack_report(). snd_soc_jack_report() already calls
snd_soc_dapm_sync() internally, so there is no need to call it manually
and can be removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-18 04:46:55 +01:00
Lars-Peter Clausen
0fbcbef98d ASoC: max98088: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-18 04:46:55 +01:00
Lars-Peter Clausen
ed3347e83c ASoC: da9055: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-18 04:46:55 +01:00
Lars-Peter Clausen
a3ea8a66f6 ASoC: da732x: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-18 04:46:55 +01:00
Lars-Peter Clausen
9c414c6246 ASoC: da7213: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-18 04:46:55 +01:00
Lars-Peter Clausen
95fcb384e6 ASoC: sta529: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-18 04:46:55 +01:00
Lars-Peter Clausen
ea85b45b11 ASoC: sta350: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-18 04:46:55 +01:00
Lars-Peter Clausen
cc740ec84d ASoC: sta32x: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-18 04:46:54 +01:00
Herbert Xu
b9fbe709de netlink: Use random autobind rover
Currently we use a global rover to select a port ID that is unique.
This used to work consistently when it was protected with a global
lock.  However as we're now lockless, the global rover can exhibit
pathological behaviour should multiple threads all stomp on it at
the same time.

Granted this will eventually resolve itself but the process is
suboptimal.

This patch replaces the global rover with a pseudorandom starting
point to avoid this issue.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 23:43:31 -04:00
Florent Fourcot
21858cd02d tcp/ipv6: fix flow label setting in TIME_WAIT state
commit 1d13a96c74 ("ipv6: tcp: fix flowlabel value in ACK messages
send from TIME_WAIT") added the flow label in the last TCP packets.
Unfortunately, it was not casted properly.

This patch replace the buggy shift with be32_to_cpu/cpu_to_be32.

Fixes: 1d13a96c74 ("ipv6: tcp: fix flowlabel value in ACK messages")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 23:41:59 -04:00
WANG Cong
de133464c9 netns: make nsid_lock per net
The spinlock is used to protect netns_ids which is per net,
so there is no need to use a global spinlock.

Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 23:41:11 -04:00
Florian Fainelli
4ab7f91381 net: dsa: bcm_sf2: properly propagate carrier down state for MoCA
MoCA interfaces require the use of an user-space daemon (mocad) which
will typically use cmd->autoneg to force the link. This is causing other
network manager applications not to get proper carrier down
notifications because of the following sequence of events:

- link down interrupt is received, link is set to 0 by the interrupt
  handler
- fixed_link update callback runs and updates the BMSR register
  accordingly
- PHY library polls the PHY for link status, sees the link is down,
  proceeds with reporting that
- mocad gets notified of the link state and call phy_ethtool_sset()
  with cmd->autoneg set to the link status (0)
- phy_start_aneg() is called at the end of phy_ethtool_sset() and sets
  the PHY state to PHY_FORCING

Just make sure we notify the interface carrier appropriately when we
detect that the link is down in our fixed_link update callback. This is
made local to the bcm_sf2 driver as the PHY library does the right thing
in any case. This is similar to the GENET change introduced in
54d7c01d3e ("net: bcmgenet: enable MoCA
link state change detection").

Fixes: 246d7f773c ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 23:40:24 -04:00
Jiri Pirko
74b80e841b flow_dissector: remove bogus return in tipc section
Fixes: 06635a35d1 ("flow_dissect: use programable dissector in skb_flow_dissect and friends")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 23:38:23 -04:00
sixiao@microsoft.com
4b02b58b52 hv_netvsc: change member name of struct netvsc_stats
Currently the struct netvsc_stats has a member s_sync
of type u64_stats_sync.
This definition will break kernel build as the macro
netdev_alloc_pcpu_stats requires this member name to be syncp.
(see netdev_alloc_pcpu_stats definition in ./include/linux/netdevice.h)

This patch changes netvsc_stats's member name from s_sync to syncp to fix
the build break.

Signed-off-by: Simon Xiao <sixiao@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 23:37:38 -04:00
Samudrala, Sridhar
45d4122ca7 switchdev: add support for fdb add/del/dump via switchdev_port_obj ops.
- introduce port fdb obj and generic switchdev_port_fdb_add/del/dump()
- use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops.
- add support for fdb obj in switchdev_port_obj_add/del/dump()
- switch rocker to implement fdb ops via switchdev_ops

v3: updated to sync with named union changes.

Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 22:49:09 -04:00
David S. Miller
5d48ef3e95 Merge branch 'tcp_mem_pressure'
Eric Dumazet says:

====================
tcp: better handling of memory pressure

When testing commit 790ba4566c ("tcp: set SOCK_NOSPACE under memory
pressure") using edge triggered epoll applications, I found various
issues under memory pressure and thousands of active sockets.

This patch series is a first round to solve these issues, in send
and receive paths. There are probably other fixes needed, but
with this series, my tests now all succeed.

v2: fix typo in "allow one skb to be received per socket under memory pressure",
as spotted by Jason Baron.
====================

Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 22:46:26 -04:00
Eric Dumazet
b66e91ccbc tcp: halves tcp_mem[] limits
Allowing tcp to use ~19% of physical memory is way too much,
and allowed bugs to be hidden. Add to this that some drivers use a full
page per incoming frame, so real cost can be twice the advertized one.

Reduce tcp_mem by 50 % as a first step to sanity.

tcp_mem[0,1,2] defaults are now 4.68%, 6.25%, 9.37% of physical memory.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 22:45:49 -04:00
Eric Dumazet
76dfa60820 tcp: allow one skb to be received per socket under memory pressure
While testing tight tcp_mem settings, I found tcp sessions could be
stuck because we do not allow even one skb to be received on them.

By allowing one skb to be received, we introduce fairness and
eventuallu force memory hogs to release their allocation.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 22:45:49 -04:00
Eric Dumazet
8e4d980ac2 tcp: fix behavior for epoll edge trigger
Under memory pressure, tcp_sendmsg() can fail to queue a packet
while no packet is present in write queue. If we return -EAGAIN
with no packet in write queue, no ACK packet will ever come
to raise EPOLLOUT.

We need to allow one skb per TCP socket, and make sure that
tcp sockets can release their forward allocations under pressure.

This is a followup to commit 790ba4566c ("tcp: set SOCK_NOSPACE
under memory pressure")

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 22:45:48 -04:00
Eric Dumazet
b8da51ebb1 tcp: introduce tcp_under_memory_pressure()
Introduce an optimized version of sk_under_memory_pressure()
for TCP. Our intent is to use it in fast paths.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 22:45:48 -04:00
Eric Dumazet
a6c5ea4ccf tcp: rename sk_forced_wmem_schedule() to sk_forced_mem_schedule()
We plan to use sk_forced_wmem_schedule() in input path as well,
so make it non static and rename it.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 22:45:48 -04:00
Eric Dumazet
1a24e04e4b net: fix sk_mem_reclaim_partial()
sk_mem_reclaim_partial() goal is to ensure each socket has
one SK_MEM_QUANTUM forward allocation. This is needed both for
performance and better handling of memory pressure situations in
follow up patches.

SK_MEM_QUANTUM is currently a page, but might be reduced to 4096 bytes
as some arches have 64KB pages.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 22:45:48 -04:00
Nicolas Dichtel
ed2a80ab7b rtnl/bond: don't send rtnl msg for unregistered iface
Before the patch, the command 'ip link add bond2 type bond mode 802.3ad'
causes the kernel to send a rtnl message for the bond2 interface, with an
ifindex 0.

'ip monitor' shows:
0: bond2: <BROADCAST,MULTICAST,MASTER> mtu 1500 state DOWN group default
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
9: bond2@NONE: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default
    link/ether ea:3e:1f:53:92:7b brd ff:ff:ff:ff:ff:ff
[snip]

The patch fixes the spotted bug by checking in bond driver if the interface
is registered before calling the notifier chain.
It also adds a check in rtmsg_ifinfo() to prevent this kind of bug in the
future.

Fixes: d4261e5650 ("bonding: create netlink event when bonding option is changed")
CC: Jiri Pirko <jiri@resnulli.us>
Reported-by: Julien Meunier <julien.meunier@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 22:43:07 -04:00
Willem de Bruijn
4633c9e07b net-packet: fix null pointer exception in rollover mode
Rollover can be enabled as flag or mode. Allocate state in both cases.
This solves a NULL pointer exception in fanout_demux_rollover on
referencing po->rollover if using mode rollover.

Also make sure that in rollover mode each silo is tried (contrary
to rollover flag, where the main socket is excluded after an initial
try_self).

Tested:
  Passes tools/testing/net/psock_fanout.c, which tests both modes and
  flag. My previous tests were limited to bench_rollover, which only
  stresses the flag. The test now completes safely. it still gives an
  error for mode rollover, because it does not expect the new headroom
  (ROOM_NORMAL) requirement. I will send a separate patch to the test.

Fixes: 0648ab70af ("packet: rollover prepare: per-socket state")

Signed-off-by: Willem de Bruijn <willemb@google.com>

----

I should have run this test and caught this before submission, of
course. Apologies for the oversight.
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 22:41:38 -04:00
Eric Dumazet
c91d460652 net: fix two sparse errors
First one in __skb_checksum_validate_complete() fixes the following
(and other callers)

make C=2 CF=-D__CHECK_ENDIAN__ net/ipv4/tcp_ipv4.o
  CHECK   net/ipv4/tcp_ipv4.c
include/linux/skbuff.h:3052:24: warning: incorrect type in return expression (different base types)
include/linux/skbuff.h:3052:24:    expected restricted __sum16
include/linux/skbuff.h:3052:24:    got int

Second is fixing gso_make_checksum() :

  CHECK   net/ipv4/gre_offload.c
include/linux/skbuff.h:3360:14: warning: incorrect type in assignment (different base types)
include/linux/skbuff.h:3360:14:    expected unsigned short [unsigned] [usertype] csum
include/linux/skbuff.h:3360:14:    got restricted __sum16
include/linux/skbuff.h:3365:16: warning: incorrect type in return expression (different base types)
include/linux/skbuff.h:3365:16:    expected restricted __sum16
include/linux/skbuff.h:3365:16:    got unsigned short [unsigned] [usertype] csum

Fixes: 5a21232983 ("net: Support for csum_bad in skbuff")
Fixes: 7e2b10c1e5 ("net: Support for multiple checksums with gso")
Signed-off-by: Eric Dumazet <edumazet@google.com>
CC: Tom Herbert <tom@herbertland.com>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 13:08:29 -04:00
Eric Dumazet
ba6d05641c netfilter: synproxy: fix sparse errors
Fix verbose sparse errors :

make C=2 CF=-D__CHECK_ENDIAN__ net/ipv4/netfilter/ipt_SYNPROXY.o

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 13:08:29 -04:00
Eric Dumazet
252a8fbe81 ipip: fix one sparse error
make C=2 CF=-D__CHECK_ENDIAN__ net/ipv4/ipip.o
  CHECK   net/ipv4/ipip.c
net/ipv4/ipip.c:254:27: warning: incorrect type in assignment (different base types)
net/ipv4/ipip.c:254:27:    expected restricted __be32 [addressable] [usertype] o_key
net/ipv4/ipip.c:254:27:    got restricted __be16 [addressable] [usertype] i_flags

Fixes: 3b7b514f44 ("ipip: fix a regression in ioctl")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 13:08:29 -04:00
Eric Dumazet
d53a2aa3a1 net: fix sparse error in csum_replace4()
make C=2 CF=-D__CHECK_ENDIAN__ net/ipv4/netfilter/nf_nat_l3proto_ipv4.o
  CHECK   net/ipv4/netfilter/nf_nat_l3proto_ipv4.c
include/net/checksum.h:125:64: warning: incorrect type in argument 2 (different base types)
include/net/checksum.h:125:64:    expected restricted __wsum [usertype] addend
include/net/checksum.h:125:64:    got restricted __be32 [usertype] from
include/net/checksum.h:125:71: warning: incorrect type in argument 2 (different base types)
include/net/checksum.h:125:71:    expected restricted __wsum [usertype] addend
include/net/checksum.h:125:71:    got restricted __be32 [usertype] to
include/net/checksum.h:125:64: warning: incorrect type in argument 2 (different base types)
include/net/checksum.h:125:64:    expected restricted __wsum [usertype] addend
include/net/checksum.h:125:64:    got restricted __be32 [usertype] from
include/net/checksum.h:125:71: warning: incorrect type in argument 2 (different base types)
include/net/checksum.h:125:71:    expected restricted __wsum [usertype] addend
include/net/checksum.h:125:71:    got restricted __be32 [usertype] to

Fixes: 4565af0d40 ("net: optimise csum_replace4()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 13:08:29 -04:00
Joe Perches
861fb1078f netfilter: Use correct return for seq_show functions
Using seq_has_overflowed doesn't produce the right return value.
Either 0 or -1 is, but 0 is much more common and works well when
seq allocation retries.

I believe this doesn't matter as the initial allocation is always
sufficient, this is just a correctness patch.

Miscellanea:

o Don't use strlen, use *ptr to determine if a string
  should be emitted like all the other tests here
o Delete unnecessary return statements

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-05-17 17:25:35 +02:00
Tiberiu Breana
90bad33acb iio: accel: Add support for Sensortek STK8312
Minimal implementation of an IIO driver for the Sensortek
STK8312 3-axis accelerometer. Datasheet:
http://www.syi-group.com/uploadpic/data/201361817562681623.pdf

Includes:
- ACPI support;
- read_raw for x,y,z axes;
- reading and setting the scale (range) parameter.
- power management

Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 11:03:31 +01:00
Vlad Dogaru
c16bff4844 iio: accel: bmc150: decouple buffer and triggers
If the interrupt pins are not available, we should still be able to use
the buffer with an external trigger.  However, we won't be able to use
the hardware fifo since we have no means of signalling when the
watermark is reached.

I also added a comment to indicate that the timestamps in
bmc150_accel_data are only used for hardware fifo, since initially I was
confused about duplication with pf->timestamp.

Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Reviewed-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 10:57:27 +01:00
Martin Fuzzey
3f7f642b9b iio: core: add high pass filter attributes
Add a high pass filter attribute for measurements
(like the existing low pass)

Also add both high and low pass attributes for events.

Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 10:32:35 +01:00
Martin Fuzzey
2a17698c0e iio: mma8452: Add access to registers via DebugFS
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 10:31:09 +01:00
Martin Fuzzey
ecabae7131 iio: mma8452: Initialise before activating
Many of the hardware configuration registers may only be modified while the
device is inactive.

Currently the probe code first activates the device and then modifies the
registers (eg to set the scale). This doesn't actually work but is not
noticed since the scale used is the default value.

While at it also issue a hardware reset command at probe time.

Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 10:29:07 +01:00
Vlad Dogaru
00e0c8e8e8 iio: gyro: bmg160: decouple buffer and triggers
Make it possible to use buffering with an external trigger, such as one
based on sysfs or hrtimer.

Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 10:26:54 +01:00
Vlad Dogaru
eb2191017e iio: gyro: bmg160: remove redundant field
Replace the 'timestamp' field in struct bmg160_data with the identically
named field in iio_poll_func and with calls to iio_get_time_ns().

The reported timestamps may be slightly different, but the advantage is
that we no longer assume that the buffer of bmg160 is triggered by its
own trigger.

Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 10:24:36 +01:00
Lars-Peter Clausen
fcc1b2f57d iio: __iio_update_buffers: Perform request_update() only for new buffers
We only have to call the request_update() callback for a newly inserted
buffer. The configuration of the already previously active buffers will not
have changed.

This also allows us to move the request_update() call to the beginning of
__iio_update_buffers(), before any currently active buffers are stopped.
This makes the error handling a lot easier since no changes were made to
the buffer list and no rollback needs to be performed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 10:01:45 +01:00
Lars-Peter Clausen
248be5aafc iio: __iio_update_buffers: Slightly refactor scan mask memory management
Add a small helper function iio_free_scan_mask() that takes a mask and
frees its memory if the scan masks for the device are dynamically
allocated, otherwise does nothing. This means we don't have to open-code
the same check over and over again in __iio_update_buffers.

Also free compound_mask as soon a we are done using it. This constrains its
usage to a specific region of the function will make further refactoring
and splitting the function into smaller sub-parts more easier.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 09:45:22 +01:00
Lars-Peter Clausen
63223c5f5c iio: Replace printk in __iio_update_buffers with dev_dbg
While more verbose error messages are useful for debugging we should really
not put those error messages into the kernel log for normal errors that are
already reported to the application via the error code, when running in
non-debug mode.

Otherwise application authors might expect that this is part of the ABI and
to get the error they should scan the kernel log. Which would be rather
error prone itself since there is no direct mapping between a operation and
the error message so it is impossible to find out which error message
belongs to which error.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 09:41:43 +01:00
Dmitry Eremin-Solenikov
b87b0c0f81 iio: add m62332 DAC driver
m62332 is a simple 2-channel DAC used on several Sharp Zaurus boards to
control LCD voltage, backlight and sound. The driver use regulators to
control the reference voltage and enabling/disabling the DAC.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 09:37:45 +01:00
Kuppuswamy Sathyanarayanan
c06cee8d08 iio: ltr501: Add light channel support
Added support to calculate lux value from visible
and IR spectrum adc count values. Also added IIO_LIGHT
channel to enable user read the lux value directly
from device using illuminance input ABI.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 09:14:10 +01:00
Fabio Estevam
c24e7daf82 iio: pressure: hid-sensor-press: Fix memory leak in probe()
'channels' is allocated via kmemdup and it is never freed in the
subsequent error paths.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 09:10:33 +01:00
Fabio Estevam
2bd0462843 iio: orientation: hid-sensor-rotation: Fix memory leak in probe()
'channels' is allocated via kmemdup and it is never freed in the
subsequent error paths.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 09:10:25 +01:00
Fabio Estevam
32ee56e306 iio: orientation: hid-sensor-incl-3d: Fix memory leak in probe()
'channels' is allocated via kmemdup and it is never freed in the
subsequent error paths.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 09:10:14 +01:00
Fabio Estevam
9ecdbed790 iio: light: hid-sensor-als.c: Fix memory leak in probe()
'channels' is allocated via kmemdup and it is never freed in the
subsequent error paths.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 09:10:05 +01:00
Fabio Estevam
d8c9d23e29 iio: gyro: hid-sensor-gyro-3d: Fix memory leak in probe()
'channels' is allocated via kmemdup and it is never freed in the
subsequent error paths.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 09:09:49 +01:00
Fabio Estevam
b136faff9b iio: accel: hid-sensor-accel-3d: Fix memory leak in probe()
'channels' is allocated via kmemdup and it is never freed in the
subsequent error paths.

Use 'indio_dev->channels' directly instead, so that we avoid such
memory leak problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-17 09:09:05 +01:00