Although unlikely, it is remotely possible for an i2c command to need
more than 200ms complete. Unlike smbus, i2c devices can clock stretch
for an unspecified amount of time. The longest time I've seen
specified for a device is 144ms (bq27541 battery gas), but one could
imagine a device taking a bit slower. 1 second "ought to be enough for
anyone."
The above is not the only justifcation for going above 200ms for a
timeout, though. It turns out that if you've got a large number of
printks going out to a serial console, interrupts on a CPU can be
disabled for hundreds of milliseconds. That's not a great situation to
be in to start with (maybe we should put a cap in vprintk_emit()) but
it's pretty annoying to start seeing unexplained i2c timeouts.
Note that to understand why we can timeout when printk has interrupts
disabled, you need to understand that on current Linux ARM kernels
interrupts are routed to a single CPU in a multicore system. Thus,
you can get:
1. CPU1 is running rk3x_i2c_xfer()
2. CPU0 calls vprintk_emit(), which disables all IRQs on CPU0.
3. I2C interrupt is ready but is set to only run on CPU0, where IRQs
are disabled.
4. CPU1 timeout expires. I2C interrupt is still ready, but CPU0 is
still sitting in the same vprintk_emit()
5. CPU1 sees that no interrupt happened in 200ms, so timeout.
A normal system shouldn't see i2c timeouts anyway, so increasing the
timeout should help people debugging without hurting other people
excessively.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The mapping range is inclusive between starting and ending addresses.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When introducing reference counting for struct thread instances I forgot
to remove the synthetic threads from the machine's rbtree so that it
then the threads would have just one reference and thus the
thread__put() replacing the thread__delete() really turns into a
thread__delete() (thread->refcnt == 1 at thread__put() time) and thus
drop the thread->mg refcount, as expected by the this test.
Fix it by calling machine__remove_thread() (the counterpart of
machine__findnew_thread()) on all the synthetic threads after the
checks that involves the rbtree were done.
Before:
# perf test -v mg
30: Test thread mg sharing :
--- start ---
test child forked, pid 26995
FAILED tests/thread-mg-share.c:68 wrong refcnt (4 != 3)
test child finished with -1
---- end ----
Test thread mg sharing: FAILED!
#
After:
# perf test mg
30: Test thread mg sharing: Ok
#
Fixes: b91fc39f4a ("perf machine: Protect the machine->threads with a rwlock")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uoqq0fjei90ohhhcboz6ay33@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it is all associated with the refcount for keeping the thread
in the rbtree, it is excessive and unecessarily complex to hold a
refcont when changing machine->last_match.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-98kuesmfwtvhsrzx7ttyb0kt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help understand the failure.
[acme@zoo linux]$ perf test -v 30
30: Test thread mg sharing :
--- start ---
test child forked, pid 12275
FAILED tests/thread-mg-share.c:68 wrong refcnt (4 != 3)
test child finished with -1
---- end ----
Test thread mg sharing: FAILED!
[acme@zoo linux]$
This is under investigation, the thread__delete() calls were replaced
with thread__put(), and those cause mismatches because now we need to be
more judicious with the thread lifetime management.
I.e. previously the thread__delete() would drop the map_group refcount,
but now since thread__put doesn't call thread__delete() necessarily.
because we have other refcount holders, the map_group refcount will not
be as we expected when this test was implemented.
Will be fixed soon...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9y8e3f7ukzco5loxvnlitpfq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It seems there's no reason to suppress per-thread event stat by -T
option when -s or -p option is used. Make it work with those options.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1431351879-23798-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
WEXITSTATUS consists of the least significant 8 bits of the status
argument, so we should convert the value to signed char if we have valid
negative exit codes. And the return value of test->func() contains
negative values:
enum {
TEST_OK = 0,
TEST_FAIL = -1,
TEST_SKIP = -2,
};
Before this patch:
$ perf test -v 1
...
test child finished with 254
---- end ----
vmlinux symtab matches kallsyms: FAILED!
After this patch:
$ perf test -v 1
...
test child finished with -2
---- end ----
vmlinux symtab matches kallsyms: Skip
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431347316-30401-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Indicate to check variable location range in error message when we got
failed to find the variable.
Before this patch:
$ perf probe --add 'generic_perform_write+118 bytes'
Failed to find the location of bytes at this address.
Perhaps, it has been optimized out.
Error: Failed to add events.
After this patch:
$ perf probe --add 'generic_perform_write+118 bytes'
Failed to find the location of the 'bytes' variable at this address.
Perhaps it has been optimized out.
Use -V with the --range option to show 'bytes' location range.
Error: Failed to add events.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431336304-16863-3-git-send-email-hekuang@huawei.com
[ Improve the error message based on lkml thread ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is not easy for users to get the accurate byte offset or the line
number where a local variable can be probed.
With '--range' option, local variables in the scope of the probe point
are showed with a byte offset range, and can be added according to this
range information.
For example, there are some variables in the function
generic_perform_write():
<generic_perform_write@mm/filemap.c:0>
0 ssize_t generic_perform_write(struct file *file,
1 struct iov_iter *i, loff_t pos)
2 {
3 struct address_space *mapping = file->f_mapping;
4 const struct address_space_operations *a_ops = mapping->a_ops;
...
42 status = a_ops->write_begin(file, mapping, pos, bytes, flags,
&page, &fsdata);
44 if (unlikely(status < 0))
But we fail when we try to probe the variable 'a_ops' at line 42 or 44.
$ perf probe --add 'generic_perform_write:42 a_ops'
Failed to find the location of a_ops at this address.
Perhaps, it has been optimized out.
This is because the source code do not match the assembly, so a variable
may not be available in the source code line where it appears.
After this patch, we can lookup the accurate byte offset range of a
variable, 'INV' indicates that this variable is not valid at the given
point, but available in the scope:
$ perf probe --vars 'generic_perform_write:42' --range
Available variables at generic_perform_write:42
@<generic_perform_write+141>
[INV] ssize_t written @<generic_perform_write+[324-331]>
[INV] struct address_space_operations* a_ops @<generic_perform_write+[55-61,170-176,223-246]>
[VAL] (unknown_type) fsdata @<generic_perform_write+[70-307,346-411]>
[VAL] loff_t pos @<generic_perform_write+[0-286,286-336,346-411]>
[VAL] long int status @<generic_perform_write+[83-342,346-411]>
[VAL] long unsigned int bytes @<generic_perform_write+[122-311,320-338,346-403,403-411]>
[VAL] struct address_space* mapping @<generic_perform_write+[35-344,346-411]>
[VAL] struct iov_iter* i @<generic_perform_write+[0-340,346-411]>
[VAL] struct page* page @<generic_perform_write+[70-307,346-411]>
Then it is more clear for us to add a probe with this variable:
$ perf probe --add 'generic_perform_write+170 a_ops'
Added new event:
probe:generic_perform_write (on generic_perform_write+170 with a_ops)
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431336304-16863-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use struct strbuf instead of bare char[] to remove the length limitation
of variables in variable_list, so they will not disappear due to
overlength, and make preparation for adding more description for
variables.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431336304-16863-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to test trace.evlist against NULL twice.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1431347316-30401-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -T/--thread option is supported only on --stdio mode (at least for
now). So enforce the tty output if the option was requested.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1431184784-30525-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf record -s' and 'perf report -T' should be used together to see
per-thread event counts. Document the relation of these commands.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1431184784-30525-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The last argument to strtok_r doesn't need to be initialized, its just a
placeholder to make this routine reentrant, but gcc doesn't know about
that and complains, breaking the build, fix it by setting it to NULL.
Fixes: 0e11115644 ("perf kmem: Print gfp flags in human readable string")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iyyvkbnkrd9g19f6ta9zfkem@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When CONFIG_DEBUG_LOCK_ALLOC is defined, mutex magic is compared and
warned for (l->magic != l), here l is the address of mutex pointer.
In hid-sensor-hub as part of hsdev creation, a per hsdev mutex is
initialized during MFD cell creation. This hsdev, which contains, mutex
is part of platform data for the a cell. But platform_data is copied
in platform_device_add_data() in platform.c. This copy will copy the
whole hsdev structure including mutex. But once copied the magic
will no longer match. So when client driver call
sensor_hub_input_attr_get_raw_value, this will trigger mutex warning.
So to avoid this allocate mutex dynamically. This will be same even
after copy.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If a driver does not set interrupt triggering type when it calls
request_irq(), it means use the pin as the hardware/firmware has
configured it. There are some drivers doing this. One example is
drivers/input/serio/i8042.c that requests the interrupt like:
error = request_irq(I8042_KBD_IRQ, i8042_interrupt, IRQF_SHARED,
"i8042", i8042_platform_device);
It assumes the interrupt is already properly configured. This is true in
case of interrupts connected to the IO-APIC. However, some Intel
Braswell/Cherryview based machines use a GPIO here instead for the internal
keyboard controller.
This is a problem because even if the pin/interrupt is properly configured,
the irqchip ->irq_set_type() will never be called as the triggering flags
are 0. Because of that we do not have correct interrupt flow handler set
for the interrupt.
Fix this by adding a custom ->irq_startup() that checks if the interrupt
has no triggering type set and in that case read the type directly from the
hardware and install correct flow handler along with the mapping.
Reported-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reported-by: Freddy Paul <freddy.paul@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch fixes an inverted return value of the gpio get_direction
function.
The wrong value causes the direction sysfs entry and GPIO debugfs file
to indicate incorrect GPIO direction settings. In some cases it also
prevents setting GPIO output values.
The problem is also present in all other stable kernel versions since
linux-3.12.
Cc: Stable <stable@vger.kernel.org> # v3.12+
Reported-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a driver for the pin controller present on the IMG Pistachio SoC.
This driver provides pinmux and pinconfig operations as well as GPIO
and IRQ chips for the GPIO banks.
Changes from v4:
- Switched to using gpiochip_add_pin_range().
- Fixed up Kconfig entry.
Changes from v3:
- Addressed review comments from Ezequiel.
Changes from v2:
- Removed module stuff which would be compiled out.
Changes from v1:
- Addressed review comments from Linus.
- Changed compatible string to "img,pistachio-system-pinctrl".
- Look for GPIO sub-nodes by name.
- A couple of bug fixes.
Signed-off-by: Damien Horsley <Damien.Horsley@imgtec.com>
Signed-off-by: Govindraj Raja <govindraj.raja@imgtec.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Both pconf_get_pin and pconf_set_pin needs to lookup pin cap based
on the pin number. Create a common helper function that both
functions can use that also handles the case where no pin number is
found in the pins array.
This also fixes a small bug in pconf_get_pin where pconf_get_i2c0
would use the pins array index rather than the pin number.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As of commit 9d07d414d4 ("ARM: shmobile: r8a73a4: ape6evm: Remove
legacy platform"), r8a73a4 is only supported in generic ARM
multi-platform builds. Hence CONFIG_ARCH_MULTIPLATFORM is always set,
and the check can be removed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Regarding pin control, r8a7791 and r8a7793 are identical, so it is
sufficient to add an sh_pfc_soc_info structure to enable r8a7793 support.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The last serial port is called "SCIFB", not "SCIFAB".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Intel Sunrisepoint-H is a desktop version of the PCH (Platform Controller
Hub). It has slightly different pin configuration compared to the LP
version. This patch adds support for Sunrisepoint-H to the existing
pinctrl-sunrisepoint.c driver.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As of commit 9d07d414d4 ("ARM: shmobile: r8a73a4: ape6evm: Remove
legacy platform"), r8a73a4 is only supported in generic DT-only ARM
multi-platform builds. The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove dead code, make goto label names more expressive and add a label
in order to call mantis_dvb_exit if mantis_uart_init fails.
Also make sure that mantis_pci_exit is called if we fail the
mantis_stream_control call and that we call mantis_i2c_exit if
mantis_get_mac fails.
[mchehab@osg.samsung.com: fix merge conflict]
Signed-off-by: Silvan Jegen <s.jegen@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
TeVii S482 is a PCIe device with two tuners that actually contains two
USB devices. The devices are visible in the lsusb printout.
Bus 006 Device 002: ID 9022:d483 TeVii Technology Ltd.
Bus 007 Device 002: ID 9022:d484 TeVii Technology Ltd.
The device itself works exactly with the same settings as TechnoTrend
TT-connect S2-4600. Firmware for DS3103 demodulator is required:
http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/
This patch should be applied on top of the TT S2-4600 patch:
https://patchwork.linuxtv.org/patch/28818/
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This reverts commit 'e9c390df67 ("ASoC: rsnd: make sure it uses lock when
it calls rsnd_dai_call)' The additional locks make 1") lock issue when boot
2) lock issue when unbind/rmmod. And there is no problem without these
locks. This patch revert it.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
fixes several warnings/error emmitted by the kbuild system:
* warn: cast from pointer to integer of different size
using size_t instead of u32
* error: 'SZ_4K' undeclared
moved to PAGE_SIZE and PAGE_MASK instead
Review showed also a typo in the same code where tx_buff
was checked twice instead of checking both rx and tx_buff.
Reported by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some CODECs have a significant number of DAPM routes and for each route,
when it is added to the card, the entire card widget list must be
searched. When adding routes it is very likely, however, that adjacent
routes will require adjacent widgets. For example all the routes for a
mux are likely added in a block and the sink widget will be the same
each time and it is also quite likely that the source widgets are
sequential located in the widget list.
This patch adds a cache to the DAPM context, this cache will hold the
source and sink widgets from the last call to snd_soc_dapm_add_route for
that context. A small search of the widget list will be made from those
points for both the sink and source. Currently this search only checks
both the last widget and the one adjacent to it.
On wm8280 which has approximately 500 widgets and 30000 routes (one of
the largest CODECs in mainline), the number of paths that hit the cache
is 24000, which significantly improves probe time.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch adds one more EEH sub-command (VFIO_EEH_PE_INJECT_ERR)
to inject the specified EEH error, which is represented by
(struct vfio_eeh_pe_err), to the indicated PE for testing purpose.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The patch defines PCI error types and functions in uapi/asm/eeh.h
and exports function eeh_pe_inject_err(), which will be called by
VFIO driver to inject the specified PCI error to the indicated
PE for testing purpose.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are two equivalent sets of PE state constants, defined in
arch/powerpc/include/asm/eeh.h and include/uapi/linux/vfio.h.
Though the names are different, their corresponding values are
exactly same. The former is used by EEH core and the latter is
used by userspace.
The patch moves those constants from arch/powerpc/include/asm/eeh.h
to arch/powerpc/include/uapi/asm/eeh.h, which are expected to be
used by userspace from now on. We can't delete those constants in
vfio.h as it's uncertain that those constants have been or will be
used by userspace.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Before 69111bac42 ("powerpc: Replace __get_cpu_var uses"), in
save_mce_event, index got the value of mce_nest_count, and
mce_nest_count was incremented *after* index was set.
However, that patch changed the behaviour so that mce_nest count was
incremented *before* setting index.
This causes an off-by-one error, as get_mce_event sets index as
mce_nest_count - 1 before reading mce_event. Thus get_mce_event reads
bogus data, causing warnings like
"Machine Check Exception, Unknown event version 0 !"
and breaking MCEs handling.
Restore the old behaviour and unbreak MCE handling by subtracting one
from the newly incremented value.
The same broken change occured in machine_check_queue_event (which set
a queue read by machine_check_process_queued_event). Fix that too,
unbreaking printing of MCE information.
Fixes: 69111bac42 ("powerpc: Replace __get_cpu_var uses")
CC: stable@vger.kernel.org
CC: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
CC: Christoph Lameter <cl@linux.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently drm_gem_prime_import() checks if gem_prime_import_sg_table()
is implemented in DRM driver ops. However it is not necessary for
internal imports (i.e. dma_buf->ops == &drm_gem_prime_dmabuf_ops
and obj->dev == dev), which only increment reference count on respective
GEM objects.
This patch makes the helper check this condition only in case of
external imports fo rwhich importing sg table is indeed needed.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reference-count drm_property_blob objects, changing the API to
ref/unref.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Squash in kerneldoc fixup from Daniel Stone.]
[danvet: Squash in Oops fix from Thiery Reding.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make sure to free any hogged gpios on errors in gpiochip_add.
Also move all forward declarations to the top of the file.
Fixes: f625d46017 ("gpio: add GPIO hogging mechanism")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move irq trigger flags, which as sysfs-interface specific, to the class
device data.
This avoids accessing the gpio-descriptor flags field using non-atomic
operations without any locking, and allows for a more clear separation
of the sysfs interface from gpiolib core.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove FLAG_SYSFS_DIR, which is sysfs-interface specific, and store it
in the class-device data instead.
Note that the flag is only used during export.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Rename active-low helper using common prefix.
Also remove unnecessary manipulation of value argument.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Make sure to deregister the class device (and release the irq) while
holding the sysfs lock in gpio_unexport to prevent racing with
gpio_export.
Note that this requires the recently introduced per-gpio locking to
avoid a deadlock with the kernfs active protection when waiting for the
attribute operations to drain during deregistration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a per-gpio mutex to serialise attribute operations rather than use
one global mutex for all gpios and chips.
Having a single global lock for all gpios in a system adds unnecessary
latency to the sysfs interface, and especially when having gpio
controllers connected over slow buses.
Now that the global gpio-sysfs interrupt table is gone and with per-gpio
data in place, we can easily switch to using a more fine-grained locking
scheme.
Keep the global mutex to serialise the global (class) operations of gpio
export and unexport and chip removal.
Also document the locking assumptions made.
Note that this is also needed to fix a race between gpiod_export and
gpiod_unexport.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Drop unnecessary locking from gpiod_export_link. If the class device has
not already been unregistered, class_find_device returns the ref-counted
class device so there's no need for locking.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>