Commit graph

546,481 commits

Author SHA1 Message Date
Felix Fietkau
665a6cd809 pppoe: drop pppoe device in pppoe_unbind_sock_work
After receiving a PADT and the socket is closed, user space will no
longer drop the reference to the pppoe device.
This leads to errors like this:

[  488.570000] unregister_netdevice: waiting for eth0.2 to become free. Usage count = 2

Fixes: 287f3a943f ("pppoe: Use workqueue to die properly when a PADT is received")
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 12:58:22 -04:00
Alexey Kardashevskiy
8b2564ec74 lpfc: Fix breakage on big endian kernels
This reverts 4fbdf9cb it breaks LPFC on POWER7 machine, big endian kernel.
Without this, the kernel enters an infinite oops loop.

This is the hardware used for verification:
0005:01:00.0 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter [10df:f100] (rev 03)
0005:01:00.1 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter [10df:f100] (rev 03)

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-11 09:53:03 -07:00
Colin Cross
dc3814f404 iommu/exynos: Tell kmemleak to ignore 2nd level page tables
The pointers to the 2nd level page tables are converted to 1st level
page table entries, which means kmemleak can't find them and assumes
they have been leaked.  Call kmemleak_ignore on the 2nd level page
tables to prevent them from showing up in kmemleak reports.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-05-11 18:47:52 +02:00
K. Y. Srinivasan
dc45708ca9 storvsc: Set the SRB flags correctly when no data transfer is needed
Set the SRB flags correctly when there is no data transfer.  Without this
change some IHV drivers will fail valid commands such as TEST_UNIT_READY.

Cc: <stable@vger.kernel.org>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-11 09:46:41 -07:00
Will Deacon
5dc5616ee8 iommu/arm-smmu: Fix sign-extension of upstream bus addresses at stage 1
Stage 1 translation is controlled by two sets of page tables (TTBR0 and
TTBR1) which grow up and down from zero respectively in the ARMv8
translation regime. For the SMMU, we only care about TTBR0 and, in the
case of a 48-bit virtual space, we expect to map virtual addresses 0x0
through to 0xffff_ffff_ffff.

Given that some masters may be incapable of emitting virtual addresses
targetting TTBR1 (e.g. because they sit on a 48-bit bus), the SMMU
architecture allows bit 47 to be sign-extended, halving the virtual
range of TTBR0 but allowing TTBR1 to be used. This is controlled by the
SEP field in TTBCR2.

The SMMU driver incorrectly enables this sign-extension feature, which
causes problems when userspace addresses are programmed into a master
device with the SMMU expecting to map the incoming transactions via
TTBR0; if the top bit of address is set, we will instead get a
translation fault since TTBR1 walks are disabled in the TTBCR.

This patch fixes the issue by disabling sign-extension of a fixed
virtual address bit and instead basing the behaviour on the upstream bus
size: the incoming address is zero extended unless the upstream bus is
only 49 bits wide, in which case bit 48 is used as the sign bit and is
replicated to the upper bits.

Cc: <stable@vger.kernel.org> # v4.0+
Reported-by: Varun Sethi <varun.sethi@freescale.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-05-11 18:36:20 +02:00
Lars-Peter Clausen
ca60bc41fb ASoC: sirf-audio-codec: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm with snd_soc_codec_get_dapm().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 17:33:32 +01:00
Lars-Peter Clausen
8533eb24a9 ASoC: sgtl5000: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 17:33:32 +01:00
Lars-Peter Clausen
9f0617187a ASoC: uda1380: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Also drop the unnecessary check at the beginning of the
uda1380_set_bias_level() which compares the current level to the target
level and aborts if they are the same. Since the core will not call the
set_bias_level() callback if we already are in the target state the result
of the check is always false.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 17:33:32 +01:00
Lars-Peter Clausen
81024b1117 ASoC: uda134x: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm with snd_soc_codec_get_dapm().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 17:33:31 +01:00
Lars-Peter Clausen
41b7688137 ASoC: ml26124: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 17:33:31 +01:00
Lars-Peter Clausen
40d62f23b1 ASoC: jz4740: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 17:33:31 +01:00
Lars-Peter Clausen
2aff57e333 ASoC: es8328: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 17:33:31 +01:00
Lars-Peter Clausen
3f36f3c725 ASoC: cx20442: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 17:33:31 +01:00
Lars-Peter Clausen
6d701b6ded ASoC: ak4641: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 17:33:31 +01:00
Lars-Peter Clausen
c59878a413 ASoC: ab8500: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm with snd_soc_codec_get_dapm().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 17:33:31 +01:00
Lars-Peter Clausen
5f54ea214b ASoC: 88pm860x: Replace direct snd_soc_codec dapm field access
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 17:33:31 +01:00
Mark Brown
c8b350424d Merge remote-tracking branches 'spi/fix/fsl-cpm', 'spi/fix/fsl-dspi' and 'spi/fix/fsl-espi' into spi-linus 2015-05-11 17:29:49 +01:00
Mark Brown
bed5e4d829 spi: Fixes for v4.1
A few driver fixes plus two changes for the core, one to make the
 setup_transfer() callback optional which fixes crashes in some drivers
 which were updated to use new interfaces without apparent testing and
 one to ensure we don't expose the data buffers we use for dummy
 transfers to drivers which avoids potential issues with multiple
 accesses to them or reuse.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVO2WTAAoJECTWi3JdVIfQ19wH/2c3NnRGoj5Oz6ltE2Yv2fXd
 MZJa/pmb7rUsxB7lwffnmOZj2XZucYg05hChdYnAIV5NtwZlf2xd+s7/kWbhTOdJ
 YeFdENjODrfnfBI4Ka82T2wIjFi1KEIDYMY5SyotGRdgl7NyK2atjna/2j/iAggm
 PJljJOzzibHGx8tvQcLGNDOeoHXLzUTBg4bOcESTs63447+bn4UQgKVolEC6FY4f
 d61T7NVbdWUpwInsj5lFmjkl/w02N5WHNrpChE+AbBk++rBbE2TrJxuRUF2DstVF
 LLT5LKGygZVuTjshnlJwMYKT3m3s9qeSGUJJ5u2NIfLe0L2dp/1pZV84OOPFiN4=
 =c+gA
 -----END PGP SIGNATURE-----

Merge tag 'spi-v4.1-rc1' into spi-linus

spi: Fixes for v4.1

A few driver fixes plus two changes for the core, one to make the
setup_transfer() callback optional which fixes crashes in some drivers
which were updated to use new interfaces without apparent testing and
one to ensure we don't expose the data buffers we use for dummy
transfers to drivers which avoids potential issues with multiple
accesses to them or reuse.

# gpg: Signature made Sat 25 Apr 2015 10:59:47 BST using RSA key ID 5D5487D0
# gpg: key CD7BEEBC: no public key for trusted key - skipped
# gpg: key CD7BEEBC marked as ultimately trusted
# gpg: key AF88CD16: no public key for trusted key - skipped
# gpg: key AF88CD16 marked as ultimately trusted
# gpg: key 16005C11: no public key for trusted key - skipped
# gpg: key 16005C11 marked as ultimately trusted
# gpg: key 5621E907: no public key for trusted key - skipped
# gpg: key 5621E907 marked as ultimately trusted
# gpg: key 5C6153AD: no public key for trusted key - skipped
# gpg: key 5C6153AD marked as ultimately trusted
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"
2015-05-11 17:29:46 +01:00
Axel Lin
33f434d283 phy: core: Check requested PHY status in _of_phy_get()
This is a common checking in various drivers, so move the checking to
_of_phy_get().

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-11 21:42:27 +05:30
Felipe Balbi
5bea496820 phy: miphy365x: fix sparse warnings
Add missing 'static' modifier so sparse
won't complain anymore.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-11 21:42:26 +05:30
Felipe Balbi
99db11c6e8 phy: miphy28lp: fix sparse warnings
Add missing __iomem annotation to the base address
so Sparse doesn't complain.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-11 21:42:26 +05:30
Dmitry Torokhov
87006dd600 phy: phy-core: allow specifying supply at port level
Multi-port phys may have per port power supplies. Let's change phy
core to look for supply at the port level when multiple ports are
specified. To keep compatibility with the existing device tree board
descriptions for single-port phys we will continue looking up the
power supply at the parent node level

Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-11 21:42:25 +05:30
Arun Ramamurthy
a666f7d097 usb: ohci-platform: Use devm_of_phy_get_by_index
Getting phys by index instead of phy names so that we do
not have to create a naming scheme when multiple phys are present

Signed-off-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-11 21:42:25 +05:30
Arun Ramamurthy
216e299269 usb: ehci-platform: Use devm_of_phy_get_by_index
Getting phys by index instead of phy names so that we do
not have to create a naming scheme when multiple phys
are present

Signed-off-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-11 21:42:24 +05:30
Arun Ramamurthy
6be109b31c phy: core: Add devm_of_phy_get_by_index to phy-core
Some generic drivers, such as ehci, may use multiple phys and for such
drivers referencing phy(s) by name(s) does not make sense. Instead of
inventing new naming schemes and using custom code to iterate through them,
such drivers are better of using nameless phy bindings and using this newly
introduced API to iterate through them.

Signed-off-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
[kishon@ti.com: fix compilation errors]
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-11 21:42:23 +05:30
Chris Metcalf
47ad7b9bbe tile: improve stack backtrace
This commit fixes a number of issues with the tile backtrace code.

- Don't try to identify userspace shared object or executable paths
  if we are doing a backtrace from an interrupt; it's not legal,
  and also unlikely to be interesting.  Likewise, don't try to do
  it for other address spaces, since d_path() assumes it is being
  called in "current" context.

- Move "in_backtrace" from thread_struct to thread_info.
  This way we can access it even if our stack thread_info has been
  clobbered, which makes backtracing more robust.

- Avoid using "current" directly when testing for is_sigreturn().
  Since "current" may be corrupt, we're better off using kbt->task
  explicitly to look up the vdso_base for the current task.
  Conveniently, this simplifies the internal APIs (we only need
  one is_sigreturn() function now).

- Avoid bogus "Odd fault" warning when pc/sp/ex1 are all zero,
  as is true for kernel threads above the last frame.

- Hook into Tejun Heo's dump_stack() framework in lib/dump_stack.c.

- Write last entry in save_stack_trace() as ULONG_MAX, not zero,
  since ftrace (at least) relies on finding that marker.

- Implement save_stack_trace_regs() and save_strack_trace_user(),
  and set CONFIG_USER_STACKTRACE_SUPPORT.

Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-05-11 11:22:40 -04:00
Chris Metcalf
e8200baa2f tile: fix "odd fault" warning for stack backtraces
We were setting ex1 in new kernel threads to KERNEL_PL.
But since we just do a simple context-switch, not an iret,
any value set here is ignored anyway, and its presence causes
stack backtraces to end with a warning about an "odd fault".

Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-05-11 11:22:37 -04:00
Chris Metcalf
9a5d2cbe6a tile: set up initial stack top to honor STACK_TOP_DELTA
For some reason this was never changed to match the rest of the
code where we always initialize the kernel sp 64 bytes below
the top of the page.  This is generally harmless, but it does
mean that if you do a dump_stack() early on in kernel boot you
see a bogus warning about stack overrun.

Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-05-11 11:22:34 -04:00
Chris Metcalf
e5701b74cc tile: support delivering NMIs for multicore backtrace
A new hypervisor service was added some time ago (MDE 4.2.1 or
later, or MDE 4.3 or later) that allows cores to request NMIs
to be delivered to other cores.  Use this facility to deliver
a request that causes a backtrace to be generated on each core,
and hook it into the magic SysRq functionality.

Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-05-11 11:22:31 -04:00
Chris Metcalf
b4287df829 drivers/tty/hvc/hvc_tile.c: properly return -EAGAIN
We were returning zero if no bytes could be written to the Tilera
hypervisor console device, but this causes the output to be truncated.
By returning -EAGAIN the tty hvc driver will come back and try again,
which gives the semantics we want, and avoids dropping console output.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-05-11 11:22:20 -04:00
Xiao Guangrong
0be0226f07 KVM: MMU: fix SMAP virtualization
KVM may turn a user page to a kernel page when kernel writes a readonly
user page if CR0.WP = 1. This shadow page entry will be reused after
SMAP is enabled so that kernel is allowed to access this user page

Fix it by setting SMAP && !CR0.WP into shadow page's role and reset mmu
once CR4.SMAP is updated

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-11 17:17:50 +02:00
Paolo Bonzini
898761158b KVM: MMU: fix CR4.SMEP=1, CR0.WP=0 with shadow pages
smep_andnot_wp is initialized in kvm_init_shadow_mmu and shadow pages
should not be reused for different values of it.  Thus, it has to be
added to the mask in kvm_mmu_pte_write.

Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-11 17:17:44 +02:00
Xiao Guangrong
7cbeed9bce KVM: MMU: fix smap permission check
Current permission check assumes that RSVD bit in PFEC is always zero,
however, it is not true since MMIO #PF will use it to quickly identify
MMIO access

Fix it by clearing the bit if walking guest page table is needed

Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-11 17:17:23 +02:00
Fabio Estevam
99472cc08a spi: spidev: Remove unneeded variable
Remove unneeded variable used to store return value.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/returnvar.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 16:14:57 +01:00
Fabio Estevam
0f9a7fecf2 ASoC: fsl: imx-mc13783: Simplify trivial if-return sequence
Simplify a trivial if-return sequence.  Possibly combine with a
preceding function call.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/simple_return.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 16:13:45 +01:00
Fabio Estevam
d0657fe8c6 ASoC: fsl: fsl_dma: Use true/false for boolean init
Bool initializations should use true and false.  Bool tests don't need
comparisons.  Based on contributions from Joe Perches, Rusty Russell
and Bruce W Allan.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/boolinit.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-11 16:13:36 +01:00
David S. Miller
3bb45001ac Merge branch 'handle_ing_lightweight'
Daniel Borkmann says:

====================
handle_ing update

These are a couple of cleanups to make ingress a bit more lightweight.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 11:10:35 -04:00
Daniel Borkmann
d2788d3488 net: sched: further simplify handle_ing
Ingress qdisc has no other purpose than calling into tc_classify()
that executes attached classifier(s) and action(s).

It has a 1:1 relationship to dev->ingress_queue. After having commit
087c1a601a ("net: sched: run ingress qdisc without locks") removed
the central ingress lock, one major contention point is gone.

The extra indirection layers however, are not necessary for calling
into ingress qdisc. pktgen calling locally into netif_receive_skb()
with a dummy u32, single CPU result on a Supermicro X10SLM-F, Xeon
E3-1240: before ~21,1 Mpps, after patch ~22,9 Mpps.

We can redirect the private classifier list to the netdev directly,
without changing any classifier API bits (!) and execute on that from
handle_ing() side. The __QDISC_STATE_DEACTIVATE test can be removed,
ingress qdisc doesn't have a queue and thus dev_deactivate_queue()
is also not applicable, ingress_cl_list provides similar behaviour.
In other words, ingress qdisc acts like TCQ_F_BUILTIN qdisc.

One next possible step is the removal of the dev's ingress (dummy)
netdev_queue, and to only have the list member in the netdevice
itself.

Note, the filter chain is RCU protected and individual filter elements
are being kfree'd by sched subsystem after RCU grace period. RCU read
lock is being held by __netif_receive_skb_core().

Joint work with Alexei Starovoitov.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 11:10:35 -04:00
Daniel Borkmann
c9e99fd078 net: sched: consolidate handle_ing and ing_filter
Given quite some code has been removed from ing_filter(), we can just
consolidate that function into handle_ing() and get rid of a few
instructions at the same time.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 11:10:34 -04:00
Gong Zhaogang
30186c6fdc workqueue: function name in the comment differs from the real function name
modify wq_calc_node_mask to wq_calc_node_cpumask

Signed-off-by: Gong Zhaogang <gongzhaogang@inspur.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-05-11 11:03:34 -04:00
Vasanthakumar Thiagarajan
2c2d2fafe2 ath10k: fix survey information reporting
Rx clear count reported in wmi_chan_info_event is actually channel_busy_count
not rx_frame_count. Send rx_clear_count through time_busy of survey_info
and set SURVEY_INFO_TIME_BUSY in filled.

iw wlan0 survey dump

urvey data from wlan0
        frequency:                      5180 MHz [in use]
        noise:                          -103 dBm
        channel active time:            150 ms
        channel busy time:              22 ms
Survey data from wlan0
        frequency:                      5200 MHz
        noise:                          -102 dBm
        channel active time:            146 ms
        channel busy time:              0 ms

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-05-11 18:02:40 +03:00
Xi Wang
986ccfdbd9 test: bpf: extend "load 64-bit immediate" testcase
Extend the testcase to catch a signedness bug in the arm64 JIT:

test_bpf: #58 load 64-bit immediate jited:1 ret -1 != 1 FAIL (1 times)

This is useful to ensure other JITs won't have a similar bug.

Link: https://lkml.org/lkml/2015/5/8/458
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 11:02:27 -04:00
Stefan Wahren
268be0f7a7 net: qca_spi: Fix possible race during probe
Registering the netdev before setting the priv data is unsafe.
So fix this possible race by setting the priv data first.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: <stable@vger.kernel.org> # v3.18+
Fixes: 291ab06e (net: qualcomm: new Ethernet over SPI driver for QCA7000)
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 11:01:20 -04:00
David S. Miller
32f89e5c1a Merge branch 'bonding_netlink_lacp'
Jonathan Toppins says:

====================
add netlink support for new lacp bonding parameters

This is a resubmit of Mahesh's last 3 bonding patches from this series
(http://marc.info/?l=linux-netdev&m=142432864626179&w=2) with one
additional kernel patch which adds the netlink bits. I have noted any
modifications I did to the original patches just above my signoff line.
Patch 5 is the iproute2 support for these bonding options. All patches
were coded against the net-next branch of their respective projects.

v2:
  * rebased
  * only send these new parameters via netlink when bond is in mode 4
  * fixed ad_actor_sys_prio to be 0xFFFF by default even when the bond
    is initially created in mode 0 and switched to mode 4

v3:
  * reverted changes to bond_option_ad_actor_system_set() from v1 in Mahesh's
    patch "bonding: Allow userspace to set actors' macaddr in an AD-system."
    Instead implementing all setting in the option specific set function as
    Nik suggested.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 10:59:32 -04:00
Andy Gospodarek
171a42c38c bonding: add netlink support for sys prio, actor sys mac, and port key
Adds netlink support for the following bonding options:
* BOND_OPT_AD_ACTOR_SYS_PRIO
* BOND_OPT_AD_ACTOR_SYSTEM
* BOND_OPT_AD_USER_PORT_KEY

When setting the actor system mac address we assume the netlink message
contains a binary mac and not a string representation of a mac.

Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
[jt: completed the setting side of the netlink attributes]
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 10:59:32 -04:00
Mahesh Bandewar
d22a5fc0c3 bonding: Implement user key part of port_key in an AD system.
The port key has three components - user-key, speed-part, and duplex-part.
The LSBit is for the duplex-part, next 5 bits are for the speed while the
remaining 10 bits are the user defined key bits. Get these 10 bits
from the user-space (through the SysFs interface) and use it to form the
admin port-key. Allowed range for the user-key is 0 - 1023 (10 bits). If
it is not provided then use zero for the user-key-bits (default).

It can set using following example code -

   # modprobe bonding mode=4
   # usr_port_key=$(( RANDOM & 0x3FF ))
   # echo $usr_port_key > /sys/class/net/bond0/bonding/ad_user_port_key
   # echo +eth1 > /sys/class/net/bond0/bonding/slaves
   ...
   # ip link set bond0 up

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com>
[jt: * fixed up style issues reported by checkpatch
     * fixed up context from change in ad_actor_sys_prio patch]
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 10:59:32 -04:00
Mahesh Bandewar
7451495755 bonding: Allow userspace to set actors' macaddr in an AD-system.
In an AD system, the communication between actor and partner is the
business between these two entities. In the current setup anyone on the
same L2 can "guess" the LACPDU contents and then possibly send the
spoofed LACPDUs and trick the partner causing connectivity issues for
the AD system. This patch allows to use a random mac-address obscuring
it's identity making it harder for someone in the L2 is do the same thing.

This patch allows user-space to choose the mac-address for the AD-system.
This mac-address can not be NULL or a Multicast. If the mac-address is set
from user-space; kernel will honor it and will not overwrite it. In the
absence (value from user space); the logic will default to using the
masters' mac as the mac-address for the AD-system.

It can be set using example code below -

   # modprobe bonding mode=4
   # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \
                    $(( (RANDOM & 0xFE) | 0x02 )) \
                    $(( RANDOM & 0xFF )) \
                    $(( RANDOM & 0xFF )) \
                    $(( RANDOM & 0xFF )) \
                    $(( RANDOM & 0xFF )) \
                    $(( RANDOM & 0xFF )))
   # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system
   # echo +eth1 > /sys/class/net/bond0/bonding/slaves
   ...
   # ip link set bond0 up

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com>
[jt: fixed up style issues reported by checkpatch]
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 10:59:32 -04:00
Mahesh Bandewar
6791e4661c bonding: Allow userspace to set actors' system_priority in AD system
This patch allows user to randomize the system-priority in an ad-system.
The allowed range is 1 - 0xFFFF while default value is 0xFFFF. If user
does not specify this value, the system defaults to 0xFFFF, which is
what it was before this patch.

Following example code could set the value -
    # modprobe bonding mode=4
    # sys_prio=$(( 1 + RANDOM + RANDOM ))
    # echo $sys_prio > /sys/class/net/bond0/bonding/ad_actor_sys_prio
    # echo +eth1 > /sys/class/net/bond0/bonding/slaves
    ...
    # ip link set bond0 up

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com>
[jt: * fixed up style issues reported by checkpatch
     * changed how the default value is set in bond_check_params(), this
       makes the default consistent between what gets set for a new bond
       and what the default is claimed to be in the bonding options.]
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 10:59:31 -04:00
Filipe Manana
062c19e9dd Btrfs: fix race when reusing stale extent buffers that leads to BUG_ON
There's a race between releasing extent buffers that are flagged as stale
and recycling them that makes us it the following BUG_ON at
btrfs_release_extent_buffer_page:

    BUG_ON(extent_buffer_under_io(eb))

The BUG_ON is triggered because the extent buffer has the flag
EXTENT_BUFFER_DIRTY set as a consequence of having been reused and made
dirty by another concurrent task.

Here follows a sequence of steps that leads to the BUG_ON.

      CPU 0                                                    CPU 1                                                CPU 2

path->nodes[0] == eb X
X->refs == 2 (1 for the tree, 1 for the path)
btrfs_header_generation(X) == current trans id
flag EXTENT_BUFFER_DIRTY set on X

btrfs_release_path(path)
    unlocks X

                                                      reads eb X
                                                         X->refs incremented to 3
                                                      locks eb X
                                                      btrfs_del_items(X)
                                                         X becomes empty
                                                         clean_tree_block(X)
                                                             clear EXTENT_BUFFER_DIRTY from X
                                                         btrfs_del_leaf(X)
                                                             unlocks X
                                                             extent_buffer_get(X)
                                                                X->refs incremented to 4
                                                             btrfs_free_tree_block(X)
                                                                X's range is not pinned
                                                                X's range added to free
                                                                  space cache
                                                             free_extent_buffer_stale(X)
                                                                lock X->refs_lock
                                                                set EXTENT_BUFFER_STALE on X
                                                                release_extent_buffer(X)
                                                                    X->refs decremented to 3
                                                                    unlocks X->refs_lock
                                                      btrfs_release_path()
                                                         unlocks X
                                                         free_extent_buffer(X)
                                                             X->refs becomes 2

                                                                                                      __btrfs_cow_block(Y)
                                                                                                          btrfs_alloc_tree_block()
                                                                                                              btrfs_reserve_extent()
                                                                                                                  find_free_extent()
                                                                                                                      gets offset == X->start
                                                                                                              btrfs_init_new_buffer(X->start)
                                                                                                                  btrfs_find_create_tree_block(X->start)
                                                                                                                      alloc_extent_buffer(X->start)
                                                                                                                          find_extent_buffer(X->start)
                                                                                                                              finds eb X in radix tree

    free_extent_buffer(X)
        lock X->refs_lock
            test X->refs == 2
            test bit EXTENT_BUFFER_STALE is set
            test !extent_buffer_under_io(eb)

                                                                                                                              increments X->refs to 3
                                                                                                                              mark_extent_buffer_accessed(X)
                                                                                                                                  check_buffer_tree_ref(X)
                                                                                                                                    --> does nothing,
                                                                                                                                        X->refs >= 2 and
                                                                                                                                        EXTENT_BUFFER_TREE_REF
                                                                                                                                        is set in X
                                                                                                              clear EXTENT_BUFFER_STALE from X
                                                                                                              locks X
                                                                                                          btrfs_mark_buffer_dirty()
                                                                                                              set_extent_buffer_dirty(X)
                                                                                                                  check_buffer_tree_ref(X)
                                                                                                                     --> does nothing, X->refs >= 2 and
                                                                                                                         EXTENT_BUFFER_TREE_REF is set
                                                                                                                  sets EXTENT_BUFFER_DIRTY on X

            test and clear EXTENT_BUFFER_TREE_REF
            decrements X->refs to 2
        release_extent_buffer(X)
            decrements X->refs to 1
            unlock X->refs_lock

                                                                                                      unlock X
                                                                                                      free_extent_buffer(X)
                                                                                                          lock X->refs_lock
                                                                                                          release_extent_buffer(X)
                                                                                                              decrements X->refs to 0
                                                                                                              btrfs_release_extent_buffer_page(X)
                                                                                                                   BUG_ON(extent_buffer_under_io(X))
                                                                                                                       --> EXTENT_BUFFER_DIRTY set on X

Fix this by making find_extent buffer wait for any ongoing task currently
executing free_extent_buffer()/free_extent_buffer_stale() if the extent
buffer has the stale flag set.
A more clean alternative would be to always increment the extent buffer's
reference count while holding its refs_lock spinlock but find_extent_buffer
is a performance critical area and that would cause lock contention whenever
multiple tasks search for the same extent buffer concurrently.

A build server running a SLES 12 kernel (3.12 kernel + over 450 upstream
btrfs patches backported from newer kernels) was hitting this often:

[1212302.461948] kernel BUG at ../fs/btrfs/extent_io.c:4507!
(...)
[1212302.470219] CPU: 1 PID: 19259 Comm: bs_sched Not tainted 3.12.36-38-default #1
[1212302.540792] Hardware name: Supermicro PDSM4/PDSM4, BIOS 6.00 04/17/2006
[1212302.540792] task: ffff8800e07e0100 ti: ffff8800d6412000 task.ti: ffff8800d6412000
[1212302.540792] RIP: 0010:[<ffffffffa0507081>]  [<ffffffffa0507081>] btrfs_release_extent_buffer_page.constprop.51+0x101/0x110 [btrfs]
(...)
[1212302.630008] Call Trace:
[1212302.630008]  [<ffffffffa05070cd>] release_extent_buffer+0x3d/0xa0 [btrfs]
[1212302.630008]  [<ffffffffa04c2d9d>] btrfs_release_path+0x1d/0xa0 [btrfs]
[1212302.630008]  [<ffffffffa04c5c7e>] read_block_for_search.isra.33+0x13e/0x3a0 [btrfs]
[1212302.630008]  [<ffffffffa04c8094>] btrfs_search_slot+0x3f4/0xa80 [btrfs]
[1212302.630008]  [<ffffffffa04cf5d8>] lookup_inline_extent_backref+0xf8/0x630 [btrfs]
[1212302.630008]  [<ffffffffa04d13dd>] __btrfs_free_extent+0x11d/0xc40 [btrfs]
[1212302.630008]  [<ffffffffa04d64a4>] __btrfs_run_delayed_refs+0x394/0x11d0 [btrfs]
[1212302.630008]  [<ffffffffa04db379>] btrfs_run_delayed_refs.part.66+0x69/0x280 [btrfs]
[1212302.630008]  [<ffffffffa04ed2ad>] __btrfs_end_transaction+0x2ad/0x3d0 [btrfs]
[1212302.630008]  [<ffffffffa04f7505>] btrfs_evict_inode+0x4a5/0x500 [btrfs]
[1212302.630008]  [<ffffffff811b9e28>] evict+0xa8/0x190
[1212302.630008]  [<ffffffff811b0330>] do_unlinkat+0x1a0/0x2b0

I was also able to reproduce this on a 3.19 kernel, corresponding to Chris'
integration branch from about a month ago, running the following stress
test on a qemu/kvm guest (with 4 virtual cpus and 16Gb of ram):

  while true; do
     mkfs.btrfs -l 4096 -f -b `expr 20 \* 1024 \* 1024 \* 1024` /dev/sdd
     mount /dev/sdd /mnt
     snapshot_cmd="btrfs subvolume snapshot -r /mnt"
     snapshot_cmd="$snapshot_cmd /mnt/snap_\`date +'%H_%M_%S_%N'\`"
     fsstress -d /mnt -n 25000 -p 8 -x "$snapshot_cmd" -X 100
     umount /mnt
  done

Which usually triggers the BUG_ON within less than 24 hours:

[49558.618097] ------------[ cut here ]------------
[49558.619732] kernel BUG at fs/btrfs/extent_io.c:4551!
(...)
[49558.620031] CPU: 3 PID: 23908 Comm: fsstress Tainted: G        W      3.19.0-btrfs-next-7+ #3
[49558.620031] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[49558.620031] task: ffff8800319fc0d0 ti: ffff880220da8000 task.ti: ffff880220da8000
[49558.620031] RIP: 0010:[<ffffffffa0476b1a>]  [<ffffffffa0476b1a>] btrfs_release_extent_buffer_page+0x20/0xe9 [btrfs]
(...)
[49558.620031] Call Trace:
[49558.620031]  [<ffffffffa0476c73>] release_extent_buffer+0x90/0xd3 [btrfs]
[49558.620031]  [<ffffffff8142b10c>] ? _raw_spin_lock+0x3b/0x43
[49558.620031]  [<ffffffffa0477052>] ? free_extent_buffer+0x37/0x94 [btrfs]
[49558.620031]  [<ffffffffa04770ab>] free_extent_buffer+0x90/0x94 [btrfs]
[49558.620031]  [<ffffffffa04396d5>] btrfs_release_path+0x4a/0x69 [btrfs]
[49558.620031]  [<ffffffffa0444907>] __btrfs_free_extent+0x778/0x80c [btrfs]
[49558.620031]  [<ffffffffa044a485>] __btrfs_run_delayed_refs+0xad2/0xc62 [btrfs]
[49558.728054]  [<ffffffff811420d5>] ? kmemleak_alloc_recursive.constprop.52+0x16/0x18
[49558.728054]  [<ffffffffa044c1e8>] btrfs_run_delayed_refs+0x6d/0x1ba [btrfs]
[49558.728054]  [<ffffffffa045917f>] ? join_transaction.isra.9+0xb9/0x36b [btrfs]
[49558.728054]  [<ffffffffa045a75c>] btrfs_commit_transaction+0x4c/0x981 [btrfs]
[49558.728054]  [<ffffffffa0434f86>] btrfs_sync_fs+0xd5/0x10d [btrfs]
[49558.728054]  [<ffffffff81155923>] ? iterate_supers+0x60/0xc4
[49558.728054]  [<ffffffff8117966a>] ? do_sync_work+0x91/0x91
[49558.728054]  [<ffffffff8117968a>] sync_fs_one_sb+0x20/0x22
[49558.728054]  [<ffffffff81155939>] iterate_supers+0x76/0xc4
[49558.728054]  [<ffffffff811798e8>] sys_sync+0x55/0x83
[49558.728054]  [<ffffffff8142bbd2>] system_call_fastpath+0x12/0x17

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
2015-05-11 07:59:11 -07:00
Filipe Manana
ff1f8250a9 Btrfs: fix race between block group creation and their cache writeout
So creating a block group has 2 distinct phases:

Phase 1 - creates the btrfs_block_group_cache item and adds it to the
rbtree fs_info->block_group_cache_tree and to the corresponding list
space_info->block_groups[];

Phase 2 - adds the block group item to the extent tree and corresponding
items to the chunk tree.

The first phase adds the block_group_cache_item to a list of pending block
groups in the transaction handle, and phase 2 happens when
btrfs_end_transaction() is called against the transaction handle.

It happens that once phase 1 completes, other concurrent tasks that use
their own transaction handle, but points to the same running transaction
(struct btrfs_trans_handle->transaction), can use this block group for
space allocations and therefore mark it dirty. Dirty block groups are
tracked in a list belonging to the currently running transaction (struct
btrfs_transaction) and not in the transaction handle (btrfs_trans_handle).

This is a problem because once a task calls btrfs_commit_transaction(),
it calls btrfs_start_dirty_block_groups() which will see all dirty block
groups and attempt to start their writeout, including those that are
still attached to the transaction handle of some concurrent task that
hasn't called btrfs_end_transaction() yet - which means those block
groups haven't gone through phase 2 yet and therefore when
write_one_cache_group() is called, it won't find the block group items
in the extent tree and abort the current transaction with -ENOENT,
turning the fs into readonly mode and require a remount.

Fix this by ignoring -ENOENT when looking for block group items in the
extent tree when we attempt to start the writeout of the block group
caches outside the critical section of the transaction commit. We will
try again later during the critical section and if there we still don't
find the block group item in the extent tree, we then abort the current
transaction.

This issue happened twice, once while running fstests btrfs/067 and once
for btrfs/078, which produced the following trace:

[ 3278.703014] WARNING: CPU: 7 PID: 18499 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x114 [btrfs]()
[ 3278.707329] BTRFS: Transaction aborted (error -2)
(...)
[ 3278.731555] Call Trace:
[ 3278.732396]  [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[ 3278.733860]  [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[ 3278.735312]  [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[ 3278.736874]  [<ffffffffa03ada6d>] ? __btrfs_abort_transaction+0x52/0x114 [btrfs]
[ 3278.738302]  [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48
[ 3278.739520]  [<ffffffffa03ada6d>] __btrfs_abort_transaction+0x52/0x114 [btrfs]
[ 3278.741222]  [<ffffffffa03b9e56>] write_one_cache_group+0xae/0xbf [btrfs]
[ 3278.742797]  [<ffffffffa03c487b>] btrfs_start_dirty_block_groups+0x170/0x2b2 [btrfs]
[ 3278.744492]  [<ffffffffa03d309c>] btrfs_commit_transaction+0x130/0x9c9 [btrfs]
[ 3278.746084]  [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf
[ 3278.747249]  [<ffffffffa03e5660>] btrfs_sync_file+0x313/0x387 [btrfs]
[ 3278.748744]  [<ffffffff8117acad>] vfs_fsync_range+0x95/0xa4
[ 3278.749958]  [<ffffffff81435b54>] ? ret_from_sys_call+0x1d/0x58
[ 3278.751218]  [<ffffffff8117acd8>] vfs_fsync+0x1c/0x1e
[ 3278.754197]  [<ffffffff8117ae54>] do_fsync+0x34/0x4e
[ 3278.755192]  [<ffffffff8117b07c>] SyS_fsync+0x10/0x14
[ 3278.756236]  [<ffffffff81435b32>] system_call_fastpath+0x12/0x17
[ 3278.757366] ---[ end trace 9a4d4df4969709aa ]---

Fixes: 1bbc621ef2 ("Btrfs: allow block group cache writeout
                      outside critical section in commit")

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-05-11 07:59:10 -07:00