Commit graph

546,481 commits

Author SHA1 Message Date
Eric Dumazet
8b929ab12f inet: remove some sk_listener dependencies
listener can be source of false sharing. request sock has some
useful information like : ireq->ir_iif, ireq->ir_num, ireq->ireq_net

This patch does not solve the major problem of having to read
sk->sk_protocol which is sharing a cache line with sk->sk_wmem_alloc.
(This same field is read later in ip_build_and_send_pkt())

One idea would be to move sk_protocol close to sk_family
(using 8 bits instead of 16 for sk_family seems enough)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:52:26 -04:00
Eric Dumazet
42cb80a235 inet: remove sk_listener parameter from syn_ack_timeout()
It is not needed, and req->sk_listener points to the listener anyway.
request_sock argument can be const.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:52:25 -04:00
Eric Dumazet
2b41fab70f inet: cache listen_sock_qlen() and read rskq_defer_accept once
Cache listen_sock_qlen() to limit false sharing, and read
rskq_defer_accept once as it might change under us.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:52:25 -04:00
Lu Baolu
227a4fd801 usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers
When a device with an isochronous endpoint is plugged into the Intel
xHCI host controller, and the driver submits multiple frames per URB,
the xHCI driver will set the Block Event Interrupt (BEI) flag on all
but the last TD for the URB. This causes the host controller to place
an event on the event ring, but not send an interrupt. When the last
TD for the URB completes, BEI is cleared, and we get an interrupt for
the whole URB.

However, under Intel xHCI host controllers, if the event ring is full
of events from transfers with BEI set,  an "Event Ring is Full" event
will be posted to the last entry of the event ring,  but no interrupt
is generated. Host will cease all transfer and command executions and
wait until software completes handling the pending events in the event
ring.  That means xHC stops, but event of "event ring is full" is not
notified. As the result, the xHC looks like dead to user.

This patch is to apply XHCI_AVOID_BEI quirk to Intel xHC devices. And
it should be backported to kernels as old as 3.0, that contains the
commit 69e848c209 ("Intel xhci: Support EHCI/xHCI port switching.").

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alistair Grant <akgrant0710@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-23 21:51:12 +01:00
Lu Baolu
9425183d17 usb: xhci: handle Config Error Change (CEC) in xhci driver
Linux xHCI driver doesn't report and handle port cofig error change.
If Port Configure Error for root hub port occurs, CEC bit in PORTSC
would be set by xHC and remains 1. This happends when the root port
fails to configure its link partner, e.g. the port fails to exchange
port capabilities information using Port Capability LMPs.

Then the Port Status Change Events will be blocked until all status
change bits(CEC is one of the change bits) are cleared('0') (refer to
xHCI spec 4.19.2). Otherwise, the port status change event for this
root port will not be generated anymore, then root port would look
like dead for user and can't be recovered until a Host Controller
Reset(HCRST).

This patch is to check CEC bit in PORTSC in xhci_get_port_status()
and set a Config Error in the return status if CEC is set. This will
cause a ClearPortFeature request, where CEC bit is cleared in
xhci_clear_port_change_bit().

[The commit log is based on initial Marvell patch posted at
http://marc.info/?l=linux-kernel&m=142323612321434&w=2]

Reported-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: stable <stable@vger.kernel.org> # v3.2+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-23 21:51:12 +01:00
Greg Kroah-Hartman
cd0e075784 Merge 4.0-rc5 into usb-next
We want the USB fixes in here as well to resolve merge conflicts.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-23 21:49:37 +01:00
David S. Miller
c9231f8247 Merge branch 'gigaset_modem_response'
Tilman Schmidt says:

====================
isdn/gigaset: restructure modem response parser

This series of patches restructures the Gigaset ISDN driver's
modem response parser to improve code readability and conform
better to the device's specification and actual behaviour.
Could you please merge these through net-next?
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:47:29 -04:00
Tilman Schmidt
4656e0a360 isdn/gigaset: restructure modem response parser (4)
Restructure the control structure of the modem response parser
to improve readability and error handling.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:47:24 -04:00
Tilman Schmidt
d93187eb10 isdn/gigaset: restructure modem response parser (3)
Separate CID detection from main parser loop.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:47:23 -04:00
Tilman Schmidt
4df1e525af isdn/gigaset: restructure modem response parser (2)
Separate literal string handling from main parser loop.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:47:23 -04:00
Tilman Schmidt
6bf5011435 isdn/gigaset: restructure modem response parser (1)
Factor out queueing of modem response events into helper function
add_cid_event().

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:47:23 -04:00
Greg Kroah-Hartman
caa445d808 Merge 4.0-rc5 into tty-next
We want the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-23 21:45:24 +01:00
Roopa Prabhu
558d51fa2f switchdev: fix stp update API to work with layered netdevices
make it same as the netdev_switch_port_bridge_setlink/dellink
api (ie traverse lowerdevs to get to the switch port).

removes "WARN_ON(!ops->ndo_switch_parent_id_get)" because
direct bridge ports can be stacked netdevices (like bonds
and team of switch ports) which may not implement this ndo.

v2 to v3:
	- remove changes to bond and team. Bring back the
	transparently following lowerdevs like i initially
	had for setlink/getlink
	(http://www.spinics.net/lists/netdev/msg313436.html)
	dave and scott feldman also seem to prefer it be that
	way and move to non-transparent way of doing things
	if we see a problem down the lane.

v3 to v4:
	- fix ret initialization

v4 to v5:
	- return err on first failure (scott feldman)

v5 to v6:
	- change variable name (err) and initialize to
	-EOPNOTSUPP (scott feldman).

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:44:56 -04:00
WANG Cong
08b4b8ea79 net: clear skb->priority when forwarding to another netns
skb->priority can be set for two purposes:

1) With respect to IP TOS field, which is computed by a mask.
Ususally used for priority qdisc's (pfifo, prio etc.), on TX
side (we only have ingress qdisc on RX side).

2) Used as a classid or flowid, works in the same way with tc
classid. What's more, this can even override the classid
of tc filters.

For case 1), it has been respected within its netns, I don't
see any point of keeping it for another netns, especially
when packets will be forwarded to Rx path (no matter from TX
path or RX path).

For case 2) we care, our applications run inside a netns,
and we classify the packets by our own filters outside,
If some application sets this priority, it could bypass
our filters, therefore clear it when moving out of a netns,
it makes no sense to bypass tc filters out of its netns.

Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:43:08 -04:00
David S. Miller
a659f91aeb Merge branch 'crypto_async'
Tadeusz Struk says:

====================
Add support for async socket operations

After the iocb parameter has been removed from sendmsg() and recvmsg() ops
the socket layer, and the network stack no longer support async operations.
This patch set adds support for asynchronous operations on sockets back.

Changes in v3:
* As sugested by Al Viro instead of adding new functions aio_sendmsg
  and aio_recvmsg, added a ptr to iocb into the kernel-side msghdr structure.
  This way no change to aio.c is required.

Changes in v2:
* removed redundant total_size param from aio_sendmsg and aio_recvmsg functions
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:41:44 -04:00
Tadeusz Struk
a596999b7d crypto: algif - change algif_skcipher to be asynchronous
The way the algif_skcipher works currently is that on sendmsg/sendpage it
builds an sgl for the input data and then on read/recvmsg it sends the job
for encryption putting the user to sleep till the data is processed.
This way it can only handle one job at a given time.
This patch changes it to be asynchronous by adding AIO support.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:41:37 -04:00
Tadeusz Struk
66db37391d crypto: af_alg - Allow to link sgl
Allow to link af_alg sgls.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:41:37 -04:00
tadeusz.struk@intel.com
0345f93138 net: socket: add support for async operations
Add support for async operations.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:41:36 -04:00
Greg Kroah-Hartman
807dc0668e Merge 4.0-rc5 into staging-testing
We want the staging tree fixes that are upstream here as well to prevent
merge conflicts from people trying to clean up code.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-23 21:36:48 +01:00
Paul Gortmaker
f43b65bad6 smack: Fix gcc warning from unused smack_syslog_lock mutex in smackfs.c
In commit 00f84f3f2e ("Smack: Make the
syslog control configurable") this mutex was added, but the rest of
the final commit never actually made use of it, resulting in:

 In file included from include/linux/mutex.h:29:0,
                  from include/linux/notifier.h:13,
                  from include/linux/memory_hotplug.h:6,
                  from include/linux/mmzone.h:821,
                  from include/linux/gfp.h:5,
                  from include/linux/slab.h:14,
                  from include/linux/security.h:27,
                  from security/smack/smackfs.c:21:
 security/smack/smackfs.c:63:21: warning: ‘smack_syslog_lock’ defined but not used [-Wunused-variable]
  static DEFINE_MUTEX(smack_syslog_lock);
                      ^

A git grep shows no other instances/references to smack_syslog_lock.
Delete it, assuming that the mutex addition was just a leftover from
an earlier work in progress version of the change.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-03-23 13:24:02 -07:00
Casey Schaufler
bf4b2fee99 Smack: Allow an unconfined label in bringup mode
I have vehemently opposed adding a "permissive" mode to Smack
for the simple reasons that it would be subject to massive abuse
and that developers refuse to turn it off come product release.
I still believe that this is true, and still refuse to add a
general "permissive mode". So don't ask again.

Bumjin Im suggested an approach that addresses most of the concerns,
and I have implemented it here. I still believe that we'd be better
off without this sort of thing, but it looks like this minimizes the
abuse potential.

Firstly, you have to configure Smack Bringup Mode. That allows
for "release" software to be ammune from abuse. Second, only one
label gets to be "permissive" at a time. You can use it for
debugging, but that's about it.

A label written to smackfs/unconfined is treated specially.
If either the subject or object label of an access check
matches the "unconfined" label, and the access would not
have been allowed otherwise an audit record and a console
message are generated. The audit record "request" string is
marked with either "(US)" or "(UO)", to indicate that the
request was granted because of an unconfined label. The
fact that an inode was accessed by an unconfined label is
remembered, and subsequent accesses to that "impure"
object are noted in the log. The impurity is not stored in
the filesystem, so a file mislabled as a side effect of
using an unconfined label may still cause concern after
a reboot.

So, it's there, it's dangerous, but so many application
developers seem incapable of living without it I have
given in. I've tried to make it as safe as I can, but
in the end it's still a chain saw.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2015-03-23 13:21:34 -07:00
José Bollo
7fc5f36e98 Smack: getting the Smack security context of keys
With this commit, the LSM Smack implements the LSM
side part of the system call keyctl with the action
code KEYCTL_GET_SECURITY.

It is now possible to get the context of, for example,
the user session key using the command "keyctl security @s".

The original patch has been modified for merge.

Signed-off-by: José Bollo <jose.bollo@open.eurogiciel.org>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2015-03-23 13:19:47 -07:00
Marcin Lis
7412301b76 Smack: Assign smack_known_web as default smk_in label for kernel thread's socket
This change fixes the bug associated with sockets owned by kernel threads. These
sockets, created usually by network devices' drivers tasks, received smk_in
label from the task that created them - the "floor" label in the most cases. The
result was that they were not able to receive data packets because of missing
smack rules. The main reason of the access deny is that the socket smk_in label
is placed as the object during smk check, kernel thread's capabilities are
omitted.

Signed-off-by: Marcin Lis <m.lis@samsung.com>
2015-03-23 13:19:37 -07:00
Hans Verkuil
8a56b6b5fd [media] v4l2-subdev: remove enum_framesizes/intervals
The video and pad ops are duplicates, so get rid of the more limited video op.

The whole point of the subdev API is to allow reuse of subdev drivers by
bridge drivers. Having duplicate ops makes that much harder. We should never
have allowed duplicate ops in the first place. A lesson for the future.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23 12:02:41 -07:00
Hans Verkuil
17bef88524 [media] v4l2-subdev: add support for the new enum_frame_interval 'which' field
Support the new 'which' field in the enum_frame_interval ops. Most drivers do not
need to be changed since they always returns the same enumeration regardless
of the 'which' field.

Tested for ov7670 and marvell-ccic on a OLPC XO-1 laptop.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23 12:01:15 -07:00
Martin Sperl
6935224da2 spi: bcm2835: enable support of 3-wire mode
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-23 11:54:34 -07:00
Martin Sperl
210b49231a spi: bcm2835: clock divider can be a multiple of 2
The official documentation is wrong in this respect.
Has been tested empirically for dividers 2-1024

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-23 11:52:26 -07:00
Hans Verkuil
d3e4bd8e10 [media] DocBook media: document the new 'which' field
The subdev enum ioctls now have a new 'which' field. Document this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23 11:50:28 -07:00
Martin Sperl
4adf312976 spi: bcm2835: fill/drain SPI-fifo as much as possible during interrupt
Implement the recommendation from the BCM2835 data-sheet
with regards to polling drivers to fill/drain the FIFO as much data as possible
also for the interrupt-driven case (which this driver is making use of).

This means that for long transfers (>64bytes) we need one interrupt
every 64 bytes instead of every 12 bytes, as the FIFO is 16 words (not bytes) wide.

Tested with mcp251x (can bus), fb_st7735 (TFT framebuffer device)
and enc28j60 (ethernet) drivers.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-23 11:48:58 -07:00
Hans Verkuil
5778e749c1 [media] v4l2-subdev: add support for the new enum_frame_size 'which' field
Support the new 'which' field in the enum_frame_size ops. Most drivers do not
need to be changed since they always returns the same enumeration regardless
of the 'which' field.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23 11:48:55 -07:00
Hans Verkuil
3f1ccf16f3 [media] v4l2-subdev: support new 'which' field in enum_mbus_code
Support the new 'which' field in the enum_mbus_code ops. Most drivers do not
need to be changed since they always return the same enumeration regardless
of the 'which' field.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23 11:46:38 -07:00
Hans Verkuil
20058f9091 [media] v4l2-subdev.c: add 'which' checks for enum ops
Return an error if an invalid 'which' valid is passed in.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23 11:45:07 -07:00
Hans Verkuil
e1c47e732c [media] v4l2-subdev.h: add 'which' field for the enum structs
While all other pad ops allow you to select whether to use the 'try' or
the 'active' formats, the enum ops didn't have that option and always used
'try'.

However, this will fail if a simple (e.g. PCI) bridge driver wants to use
the enum pad op of a subdev that's also used in a complex platform driver
like the omap3. Such a bridge driver generally wants to enum formats based
on the active format.

So add a new 'which' field to these structs. Note that V4L2_SUBDEV_FORMAT_TRY
is 0, so the default remains TRY (applications need to set reserved to 0).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23 11:44:35 -07:00
Mark Brown
1401990e8c Merge remote-tracking branches 'regulator/fix/doc' and 'regulator/fix/palmas' into regulator-linus 2015-03-23 11:43:42 -07:00
Catalin Marinas
e53f21bce4 arm64: Use the reserved TTBR0 if context switching to the init_mm
The idle_task_exit() function may call switch_mm() with next ==
&init_mm. On arm64, init_mm.pgd cannot be used for user mappings, so
this patch simply sets the reserved TTBR0.

Cc: <stable@vger.kernel.org>
Reported-by: Jon Medhurst (Tixy) <tixy@linaro.org>
Tested-by: Jon Medhurst (Tixy) <tixy@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-03-23 18:42:23 +00:00
Hans Verkuil
f7234138f1 [media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config
If a subdevice pad op is called from a bridge driver, then there is
no v4l2_subdev_fh struct that can be passed to the subdevice. This
made it hard to use such subdevs from a bridge driver.

This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config
pointer in the pad ops. This allows bridge drivers to use the various
try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it
along to the pad op.

The v4l2_subdev_get_try_* macros had to be changed because of this, so
I also took the opportunity to use the full name of the v4l2_subdev_get_try_*
functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do
'git grep v4l2_subdev_get_try_format' you will actually find the header
where it is defined.

One remark regarding the drivers/staging/media/davinci_vpfe patches: the
*_init_formats() functions assumed that fh could be NULL. However, that's
not true for this driver, it's always set. This is almost certainly a copy
and paste from the omap3isp driver. I've updated the code to reflect the
fact that fh is never NULL.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23 11:41:36 -07:00
Jonathan Richardson
d5ae685f15 Input: add Broadcom iProc touchscreen driver
Add initial version of the Broadcom touchscreen driver.

Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23 11:04:48 -07:00
Ramiro Morales
98dc070373 Input: synaptics - add quirk for Thinkpad E440
Its ClickPad shares PNP ID "LEN2006" with the one in model E540 which is
already handled by the driver (both are Haswell iterations of the Edge
line, launched in 2014) but the dimensions it reports are different:

  $ sudo ./touchpad-edge-detector /dev/input/event3
  Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event3
  Move one finger around the touchpad to detect the actual edges
  Kernel says: x [1472..5044], y [1408..3398]
  Touchpad sends: x [1024..5045], y [2457..4832] /^C

Fortunately we can use the board ID, which is also different, to
distinguish among them.

  $ dmesg | grep -i synaptics
  psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1,
      caps: 0xd001a3/0x940300/0x127c00, board id: 2691, fw id: 1494646
  psmouse serio1: synaptics: serio: Synaptics pass-through port at
      isa0060/serio1/input0
  input: SynPS/2 Synaptics TouchPad as
      /devices/platform/i8042/serio1/input/input4

Board ID in E540 is 2722:

  psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1,
      caps: 0xd001a3/0x940300/0x127c00, board id: 2722, fw id: 1484859

(from https://launchpadlibrarian.net/179702965/BootDmesg.txt)

Signed-off-by: Ramiro Morales <cramm0@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23 10:35:42 -07:00
Linus Torvalds
90a5a895cc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Validate iov ranges before feeding them into iov_iter_init(), from
    Al Viro.

 2) We changed copy_from_msghdr_from_user() to zero out the msg_namelen
    is a NULL pointer is given for the msg_name.  Do the same in the
    compat code too.  From Catalin Marinas.

 3) Fix partially initialized tuples in netfilter conntrack helper, from
    Ian Wilson.

 4) Missing continue; statement in nft_hash walker can lead to crashes,
    from Herbert Xu.

 5) tproxy_tg6_check looks for IP6T_INV_PROTO in ->flags instead of
    ->invflags, fix from Pablo Neira Ayuso.

 6) Incorrect memory account of TCP FINs can result in negative socket
    memory accounting values.  Fix from Josh Hunt.

 7) Don't allow virtual functions to enable VLAN promiscuous mode in
    be2net driver, from Vasundhara Volam.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netfilter: nft_compat: set IP6T_F_PROTO flag if protocol is set
  cx82310_eth: wait for firmware to become ready
  net: validate the range we feed to iov_iter_init() in sys_sendto/sys_recvfrom
  net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour
  be2net: use PCI MMIO read instead of config read for errors
  be2net: restrict MODIFY_EQ_DELAY cmd to a max of 8 EQs
  be2net: Prevent VFs from enabling VLAN promiscuous mode
  tcp: fix tcp fin memory accounting
  ipv6: fix backtracking for throw routes
  net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5}
  ipv6: call ipv6_proxy_select_ident instead of ipv6_select_ident in udp6_ufo_fragment
  netfilter: xt_TPROXY: fix invflags check in tproxy_tg6_check()
  netfilter: restore rule tracing via nfnetlink_log
  netfilter: nf_tables: allow to change chain policy without hook if it exists
  netfilter: Fix potential crash in nft_hash walker
  netfilter: Zero the tuple in nfnl_cthelper_parse_tuple()
2015-03-23 10:16:13 -07:00
Linus Torvalds
d5049617a0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:
 "Some perf bug fixes from David Ahern, and the fix for that nasty
  memmove() bug"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix several bugs in memmove().
  sparc: Touch NMI watchdog when walking cpus and calling printk
  sparc: perf: Add support M7 processor
  sparc: perf: Make counting mode actually work
  sparc: perf: Remove redundant perf_pmu_{en|dis}able calls
2015-03-23 10:04:02 -07:00
Daniel Lezcano
eeebc3bb4d ARM: cpuidle: Remove duplicate header inclusion
The cpu_do_idle() function is always used by the cpuidle drivers.

That led to have each driver including cpuidle.h and proc-fns.h, they are
always paired. That makes a lot of duplicate headers inclusion. Instead of
including both in each .c file, move the proc-fns.h header inclusion in the
cpuidle.h header file directly, so we can save some line of code.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-03-23 18:03:11 +01:00
Jarkko Nikula
d4f9dcd1ac spi: omap-uwire: Remove needless include asm/irq.h
asm/irq.h is already included by linux/interrupt.h.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-23 09:43:37 -07:00
Jarkko Nikula
22d1b94d4b spi: pxa2xx: Remove needless includes
These asm/io.h, asm/irq.h and asm/delay.h are needless since they are
already included by linux/io.h via drivers/spi/spi-pxa2xx.h,
linux/interrupt.h and linux/delay.h.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-23 09:43:19 -07:00
Sebastian Wicki
80b311d311 ALSA: hda - Add dock support for Thinkpad T450s (17aa:5036)
This model uses the same dock port as the previous generation.

Signed-off-by: Sebastian Wicki <gandro@gmx.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23 17:39:20 +01:00
David S. Miller
2077cef4d5 sparc64: Fix several bugs in memmove().
Firstly, handle zero length calls properly.  Believe it or not there
are a few of these happening during early boot.

Next, we can't just drop to a memcpy() call in the forward copy case
where dst <= src.  The reason is that the cache initializing stores
used in the Niagara memcpy() implementations can end up clearing out
cache lines before we've sourced their original contents completely.

For example, considering NG4memcpy, the main unrolled loop begins like
this:

     load   src + 0x00
     load   src + 0x08
     load   src + 0x10
     load   src + 0x18
     load   src + 0x20
     store  dst + 0x00

Assume dst is 64 byte aligned and let's say that dst is src - 8 for
this memcpy() call.  That store at the end there is the one to the
first line in the cache line, thus clearing the whole line, which thus
clobbers "src + 0x28" before it even gets loaded.

To avoid this, just fall through to a simple copy only mildly
optimized for the case where src and dst are 8 byte aligned and the
length is a multiple of 8 as well.  We could get fancy and call
GENmemcpy() but this is good enough for how this thing is actually
used.

Reported-by: David Ahern <david.ahern@oracle.com>
Reported-by: Bob Picco <bpicco@meloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 09:22:10 -07:00
Dmitry Torokhov
188933ac13 Linux 4.0-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVD1VGAAoJEHm+PkMAQRiG7yoH/juKOQ1zbxi5M+mleDEEJtA0
 RxQSojqEMWIKrWi8PNZxjENn1OZB6XOLIXOhlyAZBrmgsjO34p1DyXlZMznr/R8W
 kQ2Xxs061hRtB3OuruMIqOApUrjuqsaCwgbgUS1qWmqZcoyZN4oELyZMP6OOlqv5
 UUBZm8MfyXGyxrCcg39mjct3VEOhiuEcvL6SUxOC380CdSVAnyqHFPcz0JVqMUn9
 9RUBs0T9cMdhb0mZ2bfXzt6AKArj63G2nXOum+VzFcvspSm2U+MPIDCuoE+ZbTPS
 jqIAgG0rj1ezRyb5oeJrvlU0Yy3u/cXoMPs9+kORvpladooYNLti8ovh6qllm0I=
 =d/ye
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc5' into next

Merge with the latest upstream to synchronize Synaptics changes
and bring in new infrastructure pieces.

Conflicts:
	drivers/input/mouse/synaptics.c
2015-03-23 09:18:27 -07:00
Dmitry Torokhov
c164c147c9 Input: ALPS - fix max coordinates for v5 and v7 protocols
Commit 3296f71cd2 ("Input: ALPS - consolidate
setting protocol parameters") inadvertently moved call to
alps_dolphin_get_device_area() from v5 to v7 protocol, causing both
protocols report incorrect maximum values for X and Y axes which resulted
in crash in Synaptics X driver.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94801
Reported-by: Santiago Gala <sgala@apache.org>
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23 09:14:25 -07:00
Jens Thiele
4ed0e032c3 Input: sun4i-ts - allow controlling filter and sensitivity via DT
This commit introduces two new optional device-tree properties:
"tp-sensitive-adjust": adjust sensitivity of pen down detection
"filter-type": select median and averaging filter

The previous fixed defaults, didn't work well for the Olimex
A13-LCD10TS (I have).

Signed-off-by: Jens Thiele <karme@karme.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23 09:11:11 -07:00
Jiri Olsa
2c7da8c590 perf annotate: Allow annotation for decompressed kernel modules
Decompressing kernel module file for objdump command if needed.
Annotation commands now display annotation for compressed kernel
modules.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-x4jcytk2d5qjmnjvb0w75q3f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-23 12:49:27 -03:00
Jiri Olsa
bc84f46486 perf tools: Try to lookup kernel module map before creating one
Currently we assume machine__new_module is called only once for each
module so we create its map&dso unconditionally.

However it's possible that it's called multiple times for same module.
Like for perf record:

  1) via machine__create_module during machine init
  2) via kernel MMAP event processing

Trying to lookup kernel module map before creating one.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kx76xfqpnrpho5hdaapbqm09@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-23 12:46:51 -03:00