Commit graph

546,481 commits

Author SHA1 Message Date
Marcelo Ricardo Leitner
baf606d9c9 ipv4,ipv6: grab rtnl before locking the socket
There are some setsockopt operations in ipv4 and ipv6 that are grabbing
rtnl after having grabbed the socket lock. Yet this makes it impossible
to do operations that have to lock the socket when already within a rtnl
protected scope, like ndo dev_open and dev_stop.

We normally take coarse grained locks first but setsockopt inverted that.

So this patch invert the lock logic for these operations and makes
setsockopt grab rtnl if it will be needed prior to grabbing socket lock.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:05:09 -04:00
Daniel Lezcano
df67a2b72e ARM: shmobile: cpuidle: Remove the pointless default driver
The default idle driver uses one state with the WFI instruction.
The default idle routine invokes WFI when no cpuidle driver is present.

The default cpuidle driver is pointless and does not give more than the
default idle routine and moreover it pulls all the mathematics tied with
the cpuidle governor for nothing, hence consuming more energy.

Remove the default driver, the related code and register the driver directly.

[compiled only - no board - no test]

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-19 11:02:07 +09:00
David S. Miller
fdf9ef8999 Merge branch 'listen_refactor_part_13'
Eric Dumazet says:

====================
inet: tcp listener refactoring, part 13

inet_hash functions are in a bad state : Too much IPv6/IPv4 copy/pasting.

Lets refactor a bit.

Idea is that we do not want to have an equivalent of inet_csk(sk)->icsk_af_ops
for request socks in order to be able to use the right variant.

In this patch series, I started to let IPv6/IPv4 converge to common helpers.

Idea is to use ipv6_addr_set_v4mapped() even for AF_INET sockets, so that
we can test
       if (sk->sk_family == AF_INET6 &&
           !ipv6_addr_v4mapped(&sk->sk_v6_daddr))
to tell if we deal with an IPv6 socket, or IPv4 one, at least in slow paths.

Ideally, we could save 8 bytes per struct sock_common, if we
alias skc_daddr & skc_rcv_saddr to skc_v6_daddr[3]/skc_v6_rcv_saddr[3].
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:00:44 -04:00
Eric Dumazet
08d2cc3b26 inet: request sock should init IPv6/IPv4 addresses
In order to be able to use sk_ehashfn() for request socks,
we need to initialize their IPv6/IPv4 addresses.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:00:35 -04:00
Eric Dumazet
b4d6444ea3 inet: get rid of last __inet_hash_connect() argument
We now always call __inet_hash_nolisten(), no need to pass it
as an argument.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:00:35 -04:00
Eric Dumazet
77a6a471bc ipv6: get rid of __inet6_hash()
We can now use inet_hash() and __inet_hash() instead of private
functions.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:00:35 -04:00
Eric Dumazet
d1e559d0b1 inet: add IPv6 support to sk_ehashfn()
Intent is to converge IPv4 & IPv6 inet_hash functions to
factorize code.

IPv4 sockets initialize sk_rcv_saddr and sk_v6_daddr
in this patch, thanks to new sk_daddr_set() and sk_rcv_saddr_set()
helpers.

__inet6_hash can now use sk_ehashfn() instead of a private
inet6_sk_ehashfn() and will simply use __inet_hash() in a
following patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:00:34 -04:00
Eric Dumazet
5b441f76f1 net: introduce sk_ehashfn() helper
Goal is to unify IPv4/IPv6 inet_hash handling, and use common helpers
for all kind of sockets (full sockets, timewait and request sockets)

inet_sk_ehashfn() becomes sk_ehashfn() but still only copes with IPv4

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:00:34 -04:00
Eric Dumazet
6eada0110c netns: constify net_hash_mix() and various callers
const qualifiers ease code review by making clear
which objects are not written in a function.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:00:34 -04:00
Takuya Yoshikawa
58d2930f4e KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()
When all bits in mask are not set,
kvm_arch_mmu_enable_log_dirty_pt_masked() has nothing to do.  But since
it needs to be called from the generic code, it cannot be inlined, and
a few function calls, two when PML is enabled, are wasted.

Since it is common to see many pages remain clean, e.g. framebuffers can
stay calm for a long time, it is worth eliminating this overhead.

Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-18 22:23:33 -03:00
Vinod Koul
bdc455b512 ASoC: Intel: acpi_probe: fix error return path
Fix the sst_acpi_probe memory allocation error path by setting right error
code and initiating the cleanup insteadof just returning

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-19 00:57:10 +00:00
Bandan Das
faac245851 KVM: SVM: Fix confusing message if no exit handlers are installed
I hit this path on a AMD box and thought
someone was playing a April Fool's joke on me.

Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-03-18 21:52:49 -03:00
Lu, Han
5d5b275d72 Intel: ASoC: Add condition check before set param to waves
Check waves state before set parameter through ipc to prevent unexpected
operation. Also remove redundant check.

Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-19 00:49:11 +00:00
Sam Bradshaw
bc188d818e blkmq: Fix NULL pointer deref when all reserved tags in
When allocating from the reserved tags pool, bt_get() is called with
a NULL hctx.  If all tags are in use, the hw queue is kicked to push
out any pending IO, potentially freeing tags, and tag allocation is
retried.  The problem is that blk_mq_run_hw_queue() doesn't check for
a NULL hctx.  So we avoid it with a simple NULL hctx test.

Tested by hammering mtip32xx with concurrent smartctl/hdparm.

Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Fixes: b32232073e ("blk-mq: fix hang in bt_get()")
Cc: stable@kernel.org

Added appropriate comment.

Signed-off-by: Jens Axboe <axboe@fb.com>
2015-03-18 17:06:18 -06:00
Gauthier Voron
acf60c3d3d Staging: lustre: fix some coding style
This patch remove unnecessary bracket.

Signed-off-by: Gauthier Voron <gauthier.voron@lip6.fr>
Signed-off-by: Hakan Metin <hakan.metin@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 23:59:18 +01:00
Gauthier Voron
9f0d9bfabf Staging: lustre: fix coding style
This patch fix too large line.

Signed-off-by: Gauthier Voron <gauthier.voron@lip6.fr>
Signed-off-by: Hakan Metin <hakan.metin@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 23:59:18 +01:00
Peter Huewe
6b37729bd1 tpm/tpm_infineon: Use struct dev_pm_ops for power management
Make the tpm_infineon driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct pnp_driver.

This allows the driver to use tpm_pm_suspend() as its suspend
callback directly, so we can remove the duplicated savestate code.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-03-18 22:43:08 +01:00
Peter Huewe
ce93b4b086 MAINTAINERS: Add Jason as designated reviewer for TPM
Jason does an excellent job reviewing the TPM stuff, so we add him to
the designated reviewer list (with his consent :)

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-03-18 22:43:08 +01:00
Peter Huewe
44506436d7 tpm: Update KConfig text to include TPM2.0 FIFO chips
I got a lot of requests lately about whether the new TPM2.0 support
includes the FIFO interface for TPM2.0 as well.
The FIFO interface is handled by tpm_tis since FIFO=TIS (more or less).
-> Update the helptext and headline

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-03-18 22:43:07 +01:00
Christophe Ricard
92a2c6b26b tpm/st33zp24/dts/st33zp24-spi: Add dts documentation for st33zp24 spi phy
Reviewed-by: Jason Gunthorpe <jason.gunthorpe@obsidianresearch.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-03-18 22:43:07 +01:00
Christophe Ricard
f042a315ae tpm/st33zp24/spi: Add st33zp24 spi phy
st33zp24 TIS 1.2 support also SPI. It is using a proprietary protocol to
transport TIS data.

Acked-by: Jarkko Sakkinen <jarkko.sakknen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jason.gunthorpe@obsidianresearch.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-03-18 22:43:06 +01:00
Christophe Ricard
bf38b87108 tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)
tpm_i2c_stm_st33 is a TIS 1.2 TPM with a core interface which can be used
by different phy such as i2c or spi. The core part is called st33zp24 which
is also the main part reference.

include/linux/platform_data/tpm_stm_st33.h is renamed consequently.
The driver is also split into an i2c phy in charge of sending/receiving
data as well as managing platform data or dts configuration.

Acked-by: Jarkko Sakkinen <jarkko.sakknen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jason.gunthorpe@obsidianresearch.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-03-18 22:43:06 +01:00
Christophe Ricard
fe7d36859f tpm/tpm_i2c_stm_st33: Replace access to io_lpcpd from struct st33zp24_platform_data to tpm_stm_dev
io_lpcpd is accessible from struct tpm_stm_dev.
struct st33zp24_platform_data is only valid when using static platform
configuration data, not when using dts.

Reviewed-by: Jason Gunthorpe <jason.gunthorpe@obsidianresearch.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-03-18 22:43:05 +01:00
Jarkko Sakkinen
34d47b6322 tpm: fix: sanitized code paths in tpm_chip_register()
I started to work with PPI interface so that it would be available
under character device sysfs directory and realized that chip
registeration was still too messy.

In TPM 1.x in some rare scenarios (errors that almost never occur)
wrong order in deinitialization steps was taken in teardown. I
reproduced these scenarios by manually inserting error codes in the
place of the corresponding function calls.

The key problem is that the teardown is messy with two separate code
paths (this was inherited when moving code from tpm-interface.c).

Moved TPM 1.x specific register/unregister functionality to own helper
functions and added single code path for teardown in tpm_chip_register().
Now the code paths have been fixed and it should be easier to review
later on this part of the code.

Cc: <stable@vger.kernel.org>
Fixes: 7a1d7e6dd7 ("tpm: TPM 2.0 baseline support")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Scot Doyle <lkml14@scotdoyle.com>
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-03-18 22:43:05 +01:00
Rafael J. Wysocki
71150d2265 PNP: Avoid leaving unregistered device objects in lists
pnp_register_protocol() and __pnp_add_device() both have a problem
that if device_register() fails, the objects they create will be left
in the lists they have been put one beforehand.  Unfortunately, that
is not handled by the callers of those routines either, so in case
of a device registration errors the PNP bus type's data structures
will end up in an inconsistent state.

Make pnp_register_protocol() and __pnp_add_device() remove the
objects from the lists if device registration fails.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 22:40:04 +01:00
Rafael J. Wysocki
38f6b38dbb PNP: Convert pnp_lock into a mutex
pnp_lock is a spinlock, but it is only acquired from process context,
so it may be a mutex just fine.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 22:39:55 +01:00
Peter Huewe
aee94467d9 PNP: tty/serial/8250/8250_fintek: Use module_pnp_driver to register driver
Removing some boilerplate by using module_pnp_driver instead of calling
register and unregister in the otherwise empty init/exit functions

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 22:39:18 +01:00
Peter Huewe
99f74f12e8 PNP: platform/x86/apple-gmux: Use module_pnp_driver to register driver
Removing some boilerplate by using module_pnp_driver instead of calling
register and unregister in the otherwise empty init/exit functions

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 22:39:17 +01:00
Peter Huewe
ed03538aa8 PNP: net/sb1000: Use module_pnp_driver to register driver
Removing some boilerplate by using module_pnp_driver instead of calling
register and unregister in the otherwise empty init/exit functions

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 22:39:17 +01:00
Peter Huewe
af638a0407 PNP: media/rc: Use module_pnp_driver to register driver
Removing some boilerplate by using module_pnp_driver instead of calling
register and unregister in the otherwise empty init/exit functions

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 22:39:17 +01:00
Peter Huewe
6a5333092e PNP: ide/ide-pnp: Use module_pnp_driver to register driver
Removing some boilerplate by using module_pnp_driver instead of calling
register and unregister in the otherwise empty init/exit functions

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 22:39:17 +01:00
Peter Huewe
99c876bec3 PNP: ata/pata_isapnp: Use module_pnp_driver to register driver
Removing some boilerplate by using module_pnp_driver instead of calling
register and unregister in the otherwise empty init/exit functions

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 22:39:17 +01:00
Peter Huewe
1551660369 PNP: tpm/tpm_infineon: Use module_pnp_driver to register driver
Removing some boilerplate by using module_pnp_driver instead of calling
register and unregister in the otherwise empty init/exit functions

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 22:39:17 +01:00
Peter Huewe
95c0fd457b PNP: Add helper macro for pnp_register_driver boilerplate
This patch introduces the module_pnp_driver macro which is a
convenience macro for PNP driver modules similar to module_pci_driver.
It is intended to be used by drivers which init/exit section does nothing
but register/unregister the PNP driver. By using this macro it is
possible to eliminate a few lines of boilerplate code per PNP driver.

Based on work done by Lars-Peter Clausen <lars@metafoo.de> for other
busses (i2c and spi) and Greg KH for PCI.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 22:39:16 +01:00
Tang Yuantian
2f249358ee cpufreq: qoriq: rename the driver
This driver works on all QorIQ platforms which include
ARM-based cores and PPC-based cores.
Rename it in order to represent better.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 22:35:16 +01:00
Tang Yuantian
a4f207428b cpufreq: qoriq: Make the driver usable on all QorIQ platforms
Freescale introduced new ARM core-based SoCs which support dynamic
frequency switch feature. DFS on new SoCs are compatible with current
PowerPC CoreNet platforms. In order to support those new platforms,
this driver needs to be updated. The main changes include:

1. Changed the names of functions in driver.
2. Added two new functions get_cpu_physical_id() and get_bus_freq().
3. Used a new way to get the CPU mask which share clock wire.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 22:35:15 +01:00
Jonathan Sid-Otmane
71474ccba1 Staging: lustre: niobuf.c fic 80 char limit
This fixes the charatcer limit in niobuf.c

Signed-off-by: Jonathan Sid-Otmane <Jonathan.SidOtmane@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 22:17:08 +01:00
Jonathan Sid-Otmane
245cbcff17 Staging: lustre: vvp_dev.c: fix spaces issues
This fixes the space issues in the file vvp_dev.c

Signed-off-by: Jonathan Sid-Otmane <Jonathan.SidOtmane@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 22:12:51 +01:00
Roberto Medina
0b5cf51500 staging: lustre: linux: linux-prim: fixed coding style warnings and errors
Coding style fixes due to exported symbols and comment style.

Signed-off-by: Roberto Medina <robertoxmed@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 21:59:23 +01:00
Li Xi
847aac644e vfs: Add general support to enforce project quota limits
This patch adds support for a new quota type PRJQUOTA for project quota
enforcement. Also a new method get_projid() is added into dquot_operations
structure.

Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
2015-03-18 21:55:08 +01:00
Laure Millet
267d9c8a65 staging: lustre: namei.c: coding style: fix 80 characters limit
This patch fixes lines over 80 characters

Signed-off-by: Laure Millet <laure.millet@lip6.fr>
Signed-off-by: Maxime Lorrillere <maxime.lorrillere@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 21:55:04 +01:00
Laure Millet
e65dbbb800 staging: lustre: namei.c: coding style: fix quoted string split across lines
This patch fixes a quoted string split across lines.

Signed-off-by: Laure Millet <laure.millet@lip6.fr>
Signed-off-by: Maxime Lorrillere <maxime.lorrillere@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 21:46:56 +01:00
Laure Millet
07b249fa5b staging: lustre: namei.c: Fix trailing whitespace
This patch fixes a trailing whitespace in namei.c

Signed-off-by: Laure Millet <laure.millet@lip6.fr>
Signed-off-by: Maxime Lorrillere <maxime.lorrillere@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 21:46:56 +01:00
Laure Millet
7248859642 Staging: lustre: namei.c: fix "foo * bar" should be "foo *bar"
This patch fixes a coding style error in a pointer declaration.

Signed-off-by: Laure Millet <laure.millet@lip6.fr>
Signed-off-by: Maxime Lorrillere <maxime.lorrillere@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 21:46:56 +01:00
Laure Millet
43550121a7 Staging: lustre: namei.c: fix missing a blank line after declarations
This fixes a missing blank line after declarations.

Signed-off-by: Laure Millet <laure.millet@lip6.fr>
Signed-off-by: Maxime Lorrillere <maxime.lorrillere@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 21:46:56 +01:00
Tony Lindgren
599c376c49 ARM: dts: Fix gpio interrupts for dm816x
Commit 7800064ba5 ("ARM: dts: Add basic dm816x device tree
configuration") added basic devices for dm816x, but I was not able
to test the GPIO interrupts earlier until I found some suitable pins
to test with. We can mux the MMC card detect and write protect pins
from SD_SDCD and SD_SDWP mode to use a normal GPIO interrupts that
are also suitable for the MMC subsystem.

This turned out several issues that need to be fixed:

- I set the GPIO type wrong to be compatible with omap3 instead
  of omap4. The GPIO controller on dm816x has EOI interrupt
  register like omap4 and am335x.

- I got the GPIO interrupt numbers wrong as each bank has two
  and we only use one. They need to be set up the same way as
  on am335x.

- The gpio banks are missing interrupt controller related
  properties.

With these changes the GPIO interrupts can be used with the
MMC card detect pin, so let's wire that up. Let's also mux all
the MMC lines for completeness while at it.

For the first GPIO bank I tested using GPMC lines temporarily
muxed to GPIOs on the dip switch 10.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-18 13:41:34 -07:00
Kishon Vijay Abraham I
0771553322 ARM: dts: dra7: remove ti,hwmod property from pcie phy
Now that we don't have hwmod entry for pcie PHY remove the
ti,hwmod property from PCIE PHY's. Otherwise we will get:

platform 4a094000.pciephy: Cannot lookup hwmod 'pcie1-phy'

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-18 13:22:39 -07:00
David S. Miller
2fc800f2c5 Merge branch 'mlx4-net'
Or Gerlitz says:

====================
mlx4 driver fixes for 4.0-rc

Just few small fixes for the 4.0 rc cycle.

The fix from Moni addresses an issue from 4.0-rc1 so we
just need it for net.

Eran's fix for off-by-one should go to 3.19.y too.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 15:17:17 -04:00
Eran Ben Elisha
39de961a4a net/mlx4_en: Set statistics bitmap at port init
Port statistics bitmap will now be initialized at port init.  Even before
starting the port, statistics are visible to the user and must be properly masked.

Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 15:17:11 -04:00
Majd Dibbiny
61a3855bb7 IB/mlx4: Saturate RoCE port PMA counters in case of overflow
For RoCE ports, we set the u32 PMA values based on u64 HCA counters. In case of
overflow, according to the IB spec, we have to saturate a counter to its
max value, do that.

Fixes: c37791349c ('IB/mlx4: Support PMA counters for IBoE')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 15:17:11 -04:00