Commit graph

546,481 commits

Author SHA1 Message Date
Felipe Balbi
e3c93e1a3f usb: musb: core: fix TX/RX endpoint order
As per Mentor Graphics' documentation, we should
always handle TX endpoints before RX endpoints.

This patch fixes that error while also updating
some hard-to-read comments which were scattered
around musb_interrupt().

This patch should be backported as far back as
possible since this error has been in the driver
since it's conception.

Cc: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-09 10:38:48 -05:00
Felipe Balbi
d5638fcf15 usb: musb: gadget: get rid of stop_activity()
that function is pretty close to a no-op by now,
all we need is a call to musb_stop().

Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-03-09 10:38:48 -05:00
Vianney le Clément de Saint-Marcq
c7586584c6 iio: mlx90614: Refactor register symbols
The defined registers only make sense when used for accessing RAM. Make
MLX90614_OP_RAM part of the symbol definition to avoid accidental access
to the wrong register.

Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-09 14:56:58 +00:00
Steven Rostedt (Red Hat)
524a386825 ftrace: Fix ftrace enable ordering of sysctl ftrace_enabled
Some archs (specifically PowerPC), are sensitive with the ordering of
the enabling of the calls to function tracing and setting of the
function to use to be traced.

That is, update_ftrace_function() sets what function the ftrace_caller
trampoline should call. Some archs require this to be set before
calling ftrace_run_update_code().

Another bug was discovered, that ftrace_startup_sysctl() called
ftrace_run_update_code() directly. If the function the ftrace_caller
trampoline changes, then it will not be updated. Instead a call
to ftrace_startup_enable() should be called because it tests to see
if the callback changed since the code was disabled, and will
tell the arch to update appropriately. Most archs do not need this
notification, but PowerPC does.

The problem could be seen by the following commands:

 # echo 0 > /proc/sys/kernel/ftrace_enabled
 # echo function > /sys/kernel/debug/tracing/current_tracer
 # echo 1 > /proc/sys/kernel/ftrace_enabled
 # cat /sys/kernel/debug/tracing/trace

The trace will show that function tracing was not active.

Cc: stable@vger.kernel.org # 2.6.27+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-09 10:55:34 -04:00
NeilBrown
60d3e3bbd5 iio: gyro: itg3200: add suspend/resume support.
Unless we put the device to sleep when not it use, it wastes
6mA.

If the device is asleep on probe, the 'id' register
sometimes mis-reads - so reset first.  If the device responds
at all a command sent to the address, it is almost certainly
the correct device already.

Acked-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-09 14:54:42 +00:00
Pratyush Anand
1619dc3f8f ftrace: Fix en(dis)able graph caller when en(dis)abling record via sysctl
When ftrace is enabled globally through the proc interface, we must check if
ftrace_graph_active is set. If it is set, then we should also pass the
FTRACE_START_FUNC_RET command to ftrace_run_update_code(). Similarly, when
ftrace is disabled globally through the proc interface, we must check if
ftrace_graph_active is set. If it is set, then we should also pass the
FTRACE_STOP_FUNC_RET command to ftrace_run_update_code().

Consider the following situation.

 # echo 0 > /proc/sys/kernel/ftrace_enabled

After this ftrace_enabled = 0.

 # echo function_graph > /sys/kernel/debug/tracing/current_tracer

Since ftrace_enabled = 0, ftrace_enable_ftrace_graph_caller() is never
called.

 # echo 1 > /proc/sys/kernel/ftrace_enabled

Now ftrace_enabled will be set to true, but still
ftrace_enable_ftrace_graph_caller() will not be called, which is not
desired.

Further if we execute the following after this:
  # echo nop > /sys/kernel/debug/tracing/current_tracer

Now since ftrace_enabled is set it will call
ftrace_disable_ftrace_graph_caller(), which causes a kernel warning on
the ARM platform.

On the ARM platform, when ftrace_enable_ftrace_graph_caller() is called,
it checks whether the old instruction is a nop or not. If it's not a nop,
then it returns an error. If it is a nop then it replaces instruction at
that address with a branch to ftrace_graph_caller.
ftrace_disable_ftrace_graph_caller() behaves just the opposite. Therefore,
if generic ftrace code ever calls either ftrace_enable_ftrace_graph_caller()
or ftrace_disable_ftrace_graph_caller() consecutively two times in a row,
then it will return an error, which will cause the generic ftrace code to
raise a warning.

Note, x86 does not have an issue with this because the architecture
specific code for ftrace_enable_ftrace_graph_caller() and
ftrace_disable_ftrace_graph_caller() does not check the previous state,
and calling either of these functions twice in a row has no ill effect.

Link: http://lkml.kernel.org/r/e4fbe64cdac0dd0e86a3bf914b0f83c0b419f146.1425666454.git.panand@redhat.com

Cc: stable@vger.kernel.org # 2.6.31+
Signed-off-by: Pratyush Anand <panand@redhat.com>
[
  removed extra if (ftrace_start_up) and defined ftrace_graph_active as 0
  if CONFIG_FUNCTION_GRAPH_TRACER is not set.
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-09 10:50:51 -04:00
Steven Rostedt (Red Hat)
b24d443b8f ftrace: Clear REGS_EN and TRAMP_EN flags on disabling record via sysctl
When /proc/sys/kernel/ftrace_enabled is set to zero, all function
tracing is disabled. But the records that represent the functions
still hold information about the ftrace_ops that are hooked to them.

ftrace_ops may request "REGS" (have a full set of pt_regs passed to
the callback), or "TRAMP" (the ops has its own trampoline to use).
When the record is updated to represent the state of the ops hooked
to it, it sets "REGS_EN" and/or "TRAMP_EN" to state that the callback
points to the correct trampoline (REGS has its own trampoline).

When ftrace_enabled is set to zero, all ftrace locations are a nop,
so they do not point to any trampoline. But the _EN flags are still
set. This can cause the accounting to go wrong when ftrace_enabled
is cleared and an ops that has a trampoline is registered or unregistered.

For example, the following will cause ftrace to crash:

 # echo function_graph > /sys/kernel/debug/tracing/current_tracer
 # echo 0 > /proc/sys/kernel/ftrace_enabled
 # echo nop > /sys/kernel/debug/tracing/current_tracer
 # echo 1 > /proc/sys/kernel/ftrace_enabled
 # echo function_graph > /sys/kernel/debug/tracing/current_tracer

As function_graph uses a trampoline, when ftrace_enabled is set to zero
the updates to the record are not done. When enabling function_graph
again, the record will still have the TRAMP_EN flag set, and it will
look for an op that has a trampoline other than the function_graph
ops, and fail to find one.

Cc: stable@vger.kernel.org # 3.17+
Reported-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-09 10:46:00 -04:00
Josh Wu
39521090e9 gpio: mrvl: documentation: trivial: fix typo
fix typo in the document.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 15:45:40 +01:00
Nicholas Mc Guire
4e5a800c82 ncr5380: Harmonize jiffies conversion with msecs_to_jiffies
Instances of var * HZ / 1000 are replaced by msecs_to_jiffies(var).
In addition some timing constants that assumed HZ 100 were adjusted
to HZ independent settings based on review comments from Michael Schmitz
<schmitzmic@gmail.com> and review of the original drivers in 1.0.31 and
2.2.16.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-03-09 10:45:26 -04:00
Rik van Riel
126a6a5424 kvm,rcu,nohz: use RCU extended quiescent state when running KVM guest
The host kernel is not doing anything while the CPU is executing
a KVM guest VCPU, so it can be marked as being in an extended
quiescent state, identical to that used when running user space
code.

The only exception to that rule is when the host handles an
interrupt, which is already handled by the irq code, which
calls rcu_irq_enter and rcu_irq_exit.

The guest_enter and guest_exit functions already switch vtime
accounting independent of context tracking. Leave those calls
where they are, instead of moving them into the context tracking
code.

Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will deacon <will.deacon@arm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-03-09 15:43:03 +01:00
Rik van Riel
efc1e2c9bc context_tracking: Export context_tracking_user_enter/exit
Export context_tracking_user_enter/exit so it can be used by KVM.

Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will deacon <will.deacon@arm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-03-09 15:43:00 +01:00
Rik van Riel
19fdd98b62 context_tracking: Run vtime_user_enter/exit only when state == CONTEXT_USER
Only run vtime_user_enter, vtime_user_exit, and the user enter & exit
trace points when we are entering or exiting user state, respectively.

The KVM code in guest_enter and guest_exit already take care of calling
vtime_guest_enter and vtime_guest_exit, respectively.

The RCU code only distinguishes between "idle" and "not idle or kernel".
There should be no need to add an additional (unused) state there.

Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will deacon <will.deacon@arm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-03-09 15:42:57 +01:00
Rik van Riel
a3a9c7dff2 context_tracking: Add stub context_tracking_is_enabled
With code elsewhere doing something conditional on whether or not
context tracking is enabled, we want a stub function that tells us
context tracking is not enabled, when CONFIG_CONTEXT_TRACKING is
not set.

Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will deacon <will.deacon@arm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-03-09 15:42:54 +01:00
Rik van Riel
3aab4f50bf context_tracking: Generalize context tracking APIs to support user and guest
Generalize the context tracking APIs to support various nature of
contexts. This is performed by splitting out the mechanism from
context_tracking_user_enter and context_tracking_user_exit into
context_tracking_enter and context_tracking_exit.

The nature of the context we track is now detailed in a ctx_state
parameter pushed to these APIs, allowing the same functions to not just
track kernel <> user space switching, but also kernel <> guest transitions.

But leave the old functions in order to avoid breaking ARM, which calls
these functions from assembler code, and cannot easily use C enum
parameters.

Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will deacon <will.deacon@arm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-03-09 15:42:52 +01:00
Frederic Weisbecker
c467ea763f context_tracking: Rename context symbols to prepare for transition state
Current context tracking symbols are designed to express living state.
As such they are prefixed with "IN_": IN_USER, IN_KERNEL.

Now we are going to use these symbols to also express state transitions
such as context_tracking_enter(IN_USER) or context_tracking_exit(IN_USER).
But while the "IN_" prefix works well to express entering a context, it's
confusing to depict a context exit: context_tracking_exit(IN_USER)
could mean two things:
	1) We are exiting the current context to enter user context.
	2) We are exiting the user context
We want 2) but the reviewer may be confused and understand 1)

So lets disambiguate these symbols and rename them to CONTEXT_USER and
CONTEXT_KERNEL.

Acked-by: Rik van Riel <riel@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will deacon <will.deacon@arm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-03-09 16:42:50 +02:00
Frederic Weisbecker
c5ae732a44 ppc: Remove unused cpp symbols in kvm headers
These don't seem to be used anywhere.

Acked-by: Rik van Riel <riel@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will deacon <will.deacon@arm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-03-09 16:40:48 +02:00
Rob Herring
1e970b7d6d gpio: pxa: simplify BANK_OFF macro offset calculation
The macro BANK_OFF which calculates the base offset for each GPIO port.
The macro is needlessly complex and unreadable. Simplify the
calculation to a simple math operation.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09 14:41:12 +01:00
James Morris
4d08a3638c Merge branch 'for-current' of https://github.com/PeterHuewe/linux-tpmdd into for-linus 2015-03-10 00:38:16 +11:00
Martin Fuzzey
d1bd4867b0 iio: doc: Describe scale attributes for event thresholds
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-09 13:30:28 +00:00
Roberta Dobrescu
debf6d843e iio: accel: mma9551: Check gpiod_to_irq return value
The return value of gpiod_to_irq should be checked before giving
it to devm_request_threaded_irq in order to not pass an error
code in case it fails.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Reviewed-by: Vlad Dogaru <vlad.dogaru@intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-09 13:27:49 +00:00
Tejun Heo
3494fc3084 workqueue: dump workqueues on sysrq-t
Workqueues are used extensively throughout the kernel but sometimes
it's difficult to debug stalls involving work items because visibility
into its inner workings is fairly limited.  Although sysrq-t task dump
annotates each active worker task with the information on the work
item being executed, it is challenging to find out which work items
are pending or delayed on which queues and how pools are being
managed.

This patch implements show_workqueue_state() which dumps all busy
workqueues and pools and is called from the sysrq-t handler.  At the
end of sysrq-t dump, something like the following is printed.

 Showing busy workqueues and worker pools:
 ...
 workqueue filler_wq: flags=0x0
   pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=2/256
     in-flight: 491:filler_workfn, 507:filler_workfn
   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256
     in-flight: 501:filler_workfn
     pending: filler_workfn
 ...
 workqueue test_wq: flags=0x8
   pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/1
     in-flight: 510(RESCUER):test_workfn BAR(69) BAR(500)
     delayed: test_workfn1 BAR(492), test_workfn2
 ...
 pool 0: cpus=0 node=0 flags=0x0 nice=0 workers=2 manager: 137
 pool 2: cpus=1 node=0 flags=0x0 nice=0 workers=3 manager: 469
 pool 3: cpus=1 node=0 flags=0x0 nice=-20 workers=2 idle: 16
 pool 8: cpus=0-3 flags=0x4 nice=0 workers=2 manager: 62

The above shows that test_wq is executing test_workfn() on pid 510
which is the rescuer and also that there are two tasks 69 and 500
waiting for the work item to finish in flush_work().  As test_wq has
max_active of 1, there are two work items for test_workfn1() and
test_workfn2() which are delayed till the current work item is
finished.  In addition, pid 492 is flushing test_workfn1().

The work item for test_workfn() is being executed on pwq of pool 2
which is the normal priority per-cpu pool for CPU 1.  The pool has
three workers, two of which are executing filler_workfn() for
filler_wq and the last one is assuming the manager role trying to
create more workers.

This extra workqueue state dump will hopefully help chasing down hangs
involving workqueues.

v3: cpulist_pr_cont() replaced with "%*pbl" printf formatting.

v2: As suggested by Andrew, minor formatting change in pr_cont_work(),
    printk()'s replaced with pr_info()'s, and cpumask printing now
    uses cpulist_pr_cont().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
CC: Ingo Molnar <mingo@redhat.com>
2015-03-09 09:22:28 -04:00
Tejun Heo
2607d7a6db workqueue: keep track of the flushing task and pool manager
Add wq_barrier->task and worker_pool->manager to keep track of the
flushing task and pool manager respectively.  These are purely
informational and will be used to implement sysrq dump of workqueues.

Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-09 09:22:28 -04:00
Tejun Heo
e2dca7adff workqueue: make the workqueues list RCU walkable
The workqueues list is protected by wq_pool_mutex and a workqueue and
its subordinate data structures are freed directly on destruction.  We
want to add the ability dump workqueues from a sysrq callback which
requires walking all workqueues without grabbing wq_pool_mutex.  This
patch makes freeing of workqueues RCU protected and makes the
workqueues list walkable while holding RCU read lock.

Note that pool_workqueues and pools are already sched-RCU protected.
For consistency, workqueues are also protected with sched-RCU.

While at it, reverse the workqueues list so that a workqueue which is
created earlier comes before.  The order of the list isn't significant
functionally but this makes the planned sysrq dump list system
workqueues first.

Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-09 09:22:28 -04:00
Cristina Opriceana
6706bbd843 Staging: rtl8192u: Remove unnecessary macro definition
This patch removes the IEEE80211_PRINT_STR macro definition because it appears
only in the header file and it doesn't serve any purpose in this context.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:40:11 +01:00
Tina Johnson
3194e14db9 drivers: staging: iio: accel: Removed unnecessary variable
Variable len is used only to store the return value. Hence len is
removed and the return statement modified. Coccinelle was used to
detect such removable variables:

@rule1@
identifier ret;
expression e;
@@

-ret =
+return
           e;
-return ret;

Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:39:10 +01:00
Tina Johnson
90a9de8357 drivers: staging: iio: meter: Removed unnecessary variable
Variable len is used only to store the return value. Hence len is
removed and the return statement modified. Coccinelle was used to
detect such removable variables:

@rule1@
identifier ret;
expression e;
@@

-ret =
+return
           e;
-return ret;

Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:39:10 +01:00
Tina Johnson
9d9f5a2dac drivers: staging: iio: meter: Removed unnecessary variable
Variable ret is used only to store the error code to be returned.
Hence use of ret is removed and the return statement modified.
Coccinelle was used to prepare the patch:

@rule1@
identifier ret;
expression e;
@@

-ret =
+return
        e;
-return ret;

Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:39:10 +01:00
Tina Johnson
07f83131e5 drivers: staging: iio: meter: Removed unnecessary variable
Variable ret is used only to store the return value. Hence ret is
removed and the return statement modified. Coccinelle was used to
detect such removable variables:

@rule1@
identifier ret;
expression e;
@@

-ret =
+return
           e;
-return ret;

Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:39:09 +01:00
Tina Johnson
cc5797d28b drivers: staging: iio: meter: Removed unnecessary variable
Variable ret is used only to store the return value. Hence ret is
removed and the return statement modified. Coccinelle was used to
detect such removable variables:

@rule1@
identifier ret;
expression e;
@@

-ret =
+return
           e;
-return ret;

Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:39:09 +01:00
Vatika Harlalka
8d0514d563 Staging rtl8172: Remove unnecessary typecast
Using addressof and then casting to the original type is unneeded.
So these casts can be removed.
Issue detected via Coccinelle script.

Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:37:22 +01:00
Tina Johnson
c89ca085a5 drivers: staging: rtl8723au: hal: Removed unnecessary parentheses
Parentheses around the right side of an assignment statement are
unnecessary and hence removed. Coccinelle was used to produce the
patch:

@rule1@
identifier x,y;
constant c;
@@

(

 x =
-(
 y << c
-)
 ;
|
 x =
-(
 y >> c
-)
 ;
|
 x =
-(
 y + c
-)
 ;
|
 x =
-(
 y - c
-)
 ;

)

Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:37:22 +01:00
Tina Johnson
143ff11955 drivers: staging: rtl8723au: core: Removed unnecessary parentheses
Parentheses around the right side of an assignment statement are
unnecessary and hence removed. Coccinelle was used to produce the
patch:

@rule1@
identifier x,y;
constant c;
@@

(

 x =
-(
 y << c
-)
 ;
|
 x =
-(
 y >> c
-)
 ;
|
 x =
-(
 y + c
-)
 ;
|
 x =
-(
 y - c
-)
 ;

)

Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:37:22 +01:00
Tina Johnson
69e2b47fa0 drivers: staging: rtl8712: Removed unnecessary parentheses
Parentheses around the right side of an assignment statement are
unnecessary and hence removed. Coccinelle was used to produce the
patch:

@rule1@
identifier x,y;
constant c;
@@

(

 x =
-(
 y << c
-)
 ;
|
 x =
-(
 y >> c
-)
 ;
|
 x =
-(
 y + c
-)
 ;
|
 x =
-(
 y - c
-)
 ;

)

Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:37:22 +01:00
Tina Johnson
dce34aee00 drivers: staging: rtl8188eu: core: Removed unnecessary parentheses
Parentheses around the right side of an assignment statement are
unnecessary and hence removed. Coccinelle was used to produce the
patch:

@rule1@
identifier x,y;
constant c;
@@

(

 x =
-(
 y << c
-)
 ;
|
 x =
-(
 y >> c
-)
 ;
|
 x =
-(
 y + c
-)
 ;
|
 x =
-(
 y - c
-)
 ;

)

Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:37:22 +01:00
Dilek Uzulmez
a429238b9a Staging: rtl8192u: Replace #include <asm/string.h>
The following patch fixes the checkpatch.pl warning:
WARNING: Use #include <linux/string.h> instead of #include <asm/string.h>

Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:36:22 +01:00
Dilek Uzulmez
9a4ed8c506 Staging: rtl8192u: Added #include <linux/string.h> instead of <asm/string.h>
The following patch fixes the checkpatch.pl warning:
WARNING: Use #include <linux/string.h> instead of #include <asm/string.h>

Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:36:22 +01:00
Dilek Uzulmez
a6a93bc03b Staging: rtl8192u: Added #include <linux/string.h> instead of <asm/string.h>
The following patch fixes the checkpatch.pl warning:
WARNING: Use #include <linux/string.h> instead of #include <asm/string.h>

Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:36:22 +01:00
Darshana Padmadas
d009f0d7ae staging: rtl8192e: Replace min with min_t
This patch replaces min with min_t and eliminates the
following warnings found by checkpatch.pl:

WARNING: min() should probably be min_t

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:30:40 +01:00
Darshana Padmadas
a3d81a379b drivers: staging: dgnc: Replace min with min_t
This patch replaces min with min_t and eliminates
the following warning found by checkpatch.pl:

WARNING: min() should probably be min_t(uint, n, 12)

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:30:40 +01:00
Haneen Mohammed
f7d63547ea Staging: speakup: Remove unused variable
This patch removes variable that was used to store only the return value of a function call.

The issue was detected and resolved using the following coccinelle script:

@@
expression ret;
identifier f;
@@

 -ret =
 +return
    f(...);
 -return ret;

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:30:40 +01:00
Haneen Mohammed
6019ee4095 Staging: dgap: Remove unused variable
This patch removes variable that was used to store only the return value of a function call.

The issue was detected and resolved using the following coccinelle script:

@@
expression ret;
identifier f;
@@

-ret =
+return
	f(...);
-return ret;

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 13:30:40 +01:00
Florian Westphal
7a8d831df5 netfilter: bridge: refactor conditional in br_nf_dev_queue_xmit
simpilifies followup patch that re-works brnf ip_fragment handling.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-09 13:22:58 +01:00
Florian Westphal
4a9d2f2008 netfilter: bridge: move nf_bridge_update_protocol to where its used
no need to keep it in a header file.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-09 13:21:31 +01:00
Florian Westphal
8bd63cf1a4 bridge: move mac header copying into br_netfilter
The mac header only has to be copied back into the skb for
fragments generated by ip_fragment(), which only happens
for bridge forwarded packets with nf-call-iptables=1 && active nf_defrag.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-03-09 13:20:48 +01:00
Jeff Kirsher
b40c82e6ae i40e: Fix inconsistent use of PF/VF vs pf/vf
Joe Perches pointed out that we were inconsistent in the use of
PF vs pf or VF vs vf in our driver code.  Since acronyms are usually
capitalized to denote that it is an acronym, changed all references to
be consistent throughout the code.

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-09 05:20:47 -07:00
Shannon Nelson
29a0645c7d i40e: tame the nvmupdate read and write complaints
The NVMUpdate tool doesn't necessarily know the ReadOnly map of the current
NVM image, and must try reading and writing words that may be protected.
This generates an error out of the Firmware request that the driver logs.
Unfortunately, this ends up spitting out hundreds of bogus read and write
error message that looks rather messy.

This patch checks the error type and under normal conditions will not print
the typical read and write errors during NVMUpdate.  This can be overridden
by enabling the NVM update debugging.  This results in a much less messy log
file, and likely many fewer customer support questions.

Change-ID: Id4ff2e9048c523b0ff503aa5ab181b025ec948ea
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-09 05:20:47 -07:00
Jesse Brandeburg
97bf75f169 i40e/i40evf: fix accidental write to ITR registers
Fix a bug introduced in the force writeback code, where the interrupt
rate was set to 0 (maximum) by accident.

The driver must correctly set the NOITR fields to avoid ITR update
as a side effect of triggering the software interrupt.

Change-ID: I290851ae04ef3811c43aab5ee33242029f26c1a3
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-09 05:20:46 -07:00
Mitch Williams
3c8e0b989a i40vf: don't stop me now
If a reset occurs when the netdev is closed, the reset task will hang in
napi_disable, causing deadlocks and general grumpiness.

Check to make sure the device is actually running before stopping
everything. This allows the reset task to complete and have a real good
time.

Change-ID: Iaaea84acbcb9b3810c216b14c3326e4287b75b58
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-09 05:20:45 -07:00
Shannon Nelson
1efc80eeee i40e: future proof some sizeof calls
Make sure the sizeof() calls are taking the size of the actual struct
that we care about.  By using the pointer variable, we'll always get
the right struct size, even if the variable type changes sometime in
the future.

Change-ID: Id5858f883cf42447365ea3733080d7714f975bce
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-09 05:20:45 -07:00
Greg Rose
d1da3ac0ee i40e: Remove "hello world" strings from i40e driver
While using the Linux "strings" command I found these two strings in the
driver.  There's no need for them and they're kinda silly.

Change-ID: I4e19b02983d48b631e9a9979f49790492845f221
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-09 05:20:44 -07:00