Some variables relative with paravirt feature are declared in the header
file asm/qspinlock.h, however this file can be included only when option
CONFIG_SMP is on. There is compiling warnings if CONFIG_SMP is off since
variables are not declared.
Move these variable declarations to header file asm/paravirt.h to avoid
compiling warnings.
Fixes: c43dce6f13 ("LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605061313.O8Hswm2b-lkp@intel.com/
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
KPROBE_HIT_SS and KPROBE_REENTER are two types of fatal recursions that
can not be safely recovered in kprobes.
KPROBE_HIT_SS means that a kprobe is hit during single-stepping. At
this point, the architecture-specific single-step context is already
active. Nested single-stepping would corrupt the state, as the kprobe
control block (kcb) and hardware registers cannot safely store multiple
levels of stepping state.
KPROBE_REENTER means that a third-level recursion occurs when a probe
is hit while the system is already handling a nested probe (second-
level). The kcb only provides a single slot (prev_kprobe) to backup the
state. When a third probe is hit, there is no more space to save the
state without corrupting the first-level backup.
Kprobes work by replacing instructions with breakpoints. In order to
execute the original instruction and continue, it must be moved to a
temporary "single-step" slot. Since there is no backup space left to
set up this slot safely, the CPU would be forced to return to the same
original breakpoint address, triggering an endless loop.
Currently, the code only prints a warning and returns. This leads to
an infinite re-entry loop as the CPU repeatedly hits the same trap and
a "stuck" CPU core because preemption was disabled at the start of the
handler and never re-enabled in this early return path.
Fix the logic by:
1. Merging KPROBE_HIT_SS and KPROBE_REENTER cases, as both represent
fatal recursions that cannot be safely recovered.
2. Replacing WARN_ON_ONCE() with BUG() to terminate the system. This
aligns LoongArch with other architectures (x86, arm64, riscv) and
prevents stack overflow while providing diagnostic information.
Fixes: 6d4cc40fb5 ("LoongArch: Add kprobes support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
On SMP systems, kprobe handlers would occasionally fail to execute on
certain CPU cores. The issue is hard to reproduce and typically occurs
randomly under high system load.
The root cause is a software-side instruction hazard. According to the
LoongArch Reference Manual, while the cache coherency is maintained by
hardware, software must explicitly use the "IBAR" instruction to ensure
the instruction fetch unit (IFU) observes the effects of recent stores.
The current arch_arm_kprobe() and arch_disarm_kprobe() only execute the
"IBAR" barrier (via flush_insn_slot -> local_flush_icache_range) on the
local CPU. This leaves a vulnerable window where remote CPU cores may
continue executing stale instructions from their pipelines or prefetch
buffers, as they have not executed an "IBAR" since the code modification.
Switch to larch_insn_text_copy() to fix this:
1. Synchronization: It uses stop_machine_cpuslocked() to synchronize all
online CPUs, ensuring no CPU is executing the target code area during
modification.
2. Visibility: By passing cpu_online_mask to stop_machine_cpuslocked(),
the callback text_copy_cb() is executed on all online cores. Each CPU
core invokes local_flush_icache_range() to execute "IBAR", clearing
instruction hazards system-wide and ensuring the "break" instruction
is visible to the fetch units of all cores.
3. Robustness: It properly manages memory write permissions (ROX/RW) for
the kernel text segment during patching, ensuring compatibility with
CONFIG_STRICT_KERNEL_RWX.
Cc: <stable@vger.kernel.org> # 6.18+
Fixes: 6d4cc40fb5 ("LoongArch: Add kprobes support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
After commit feee6b2989 ("mm/memory_hotplug: shrink zones when
offlining memory"), __remove_pages() doesn't need the "zone" parameter
so the "page" variable is also unused. Remove the unused code to avoid
such build warning:
arch/loongarch/mm/init.c: In function 'arch_remove_memory':
arch/loongarch/mm/init.c:134:22: warning: variable 'page' set but not used [-Wunused-but-set-variable=]
134 | struct page *page = pfn_to_page(start_pfn);
Cc: <stable@vger.kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Validate the relocation address against the initrd region specified via
"initrd=" or "initrdmem=" on the command line. Reject relocation targets
that overlap the initrd to prevent memory corruption during early boot.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When the kernel is relocated during early boot (efistub or kexec_file),
a randomized load address may has already been selected and applied. In
this case, performing KASLR again in relocate.c is unnecessary.
Note: strictly-defined KASLR means the kernel's final runtime address
has a random offset from the kernel's load address, which is implemented
in relocate.c; broadly-defined KALSR means the kernel's final runtime
address has a random offset from the kernel's link address (a.k.a.
VMLINUX_LOAD_ADDRESS), which also include the efistlub implementation,
kexec_file implementation and QEMU direct kernel boot. kaslr_disabled()
return true only means strictly-defined KASLR is disabled.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Introduce efi_get_kimg_kaslr_address() helper to compute the preferred
kernel image load address dynamically when CONFIG_RANDOMIZE_BASE is
enabled. The function derives a random offset by using the EFI-provided
randomness combined with the timer tick value, and constrains it within
CONFIG_RANDOMIZE_BASE_MAX_OFFSET.
Update EFI_KIMG_PREFERRED_ADDRESS to call this helper so that the EFI
stub can select a randomized load address when KASLR is active, while
preserving the original base address behavior when KASLR is disabled or
"nokaslr" is specified.
Note: LoongArch can't KASLR for hibernation, so set efi_nokaslr to true
if "resume=<devname>" is explicitly specified in cmdline.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
On real hardware, panic and machine reboot may not flush hardware cache
to memory. This means the persistent ring buffer, which relies on a
coherent state of memory, may not have its events written to the buffer
and they may be lost. Moreover, there may be inconsistency with the
counters which are used for validation of the integrity of the
persistent ring buffer which may cause all data to be discarded.
To avoid this issue, stop recording of the ring buffer on panic and
flush the cache of the ring buffer's memory.
Fixes: e645535a95 ("tracing: Add option to use memmapped memory for trace boot instance")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/177751969602.2136606.12031934362587643488.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When timer interrupt arrives in guest kernel, guest kernel clears the
timer interrupt and program timer with the next incoming event.
During this stage, timer tick is -1 and timer interrupt status is
disabled in ESTAT register. KVM hypervisor need write zero with timer
tick register and wait timer interrupt injection from HW side, and
then clear timer interrupt.
So there is 2 cycle delay in KVM hypervisor to emulate such scenery,
and the delay is unnecessary if there is no need to clear the timer
interrupt.
Here move 2 cycle delay into timer clear scenery and add timer ESTAT
checking after delay, and set max timer expire value if timer interrupt
does not arrive still.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
With passthrough HW timer, timer interrupt is injected by HW. When
inject emulated CPU interrupt by software such SIP0/SIP1/IPI, HW timer
interrupt may be lost.
Here check whether there is timer tick value inversion before and after
injecting emulated CPU interrupt by software, timer enabling by reading
timer cfg register is skipped. If the timer tick value is detected with
changing, then timer should be enabled. And inject a timer interrupt by
software if there is.
Cc: <stable@vger.kernel.org>
Fixes: f45ad5b8aa ("LoongArch: KVM: Implement vcpu interrupt operations").
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When AVEC interrupt controller is emulated in user space, AVEC interrupt
is injected by software like SIP0/SIP1/TI/IPI interrupts. Here also move
the AVEC interrupt injection in switch loop.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
kvm_flush_pte() is the only caller that directly assigns *pte instead
of using the kvm_set_pte() wrapper. Use the wrapper for consistency with
the rest of the file.
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In the ldptr (0x24...0x27) opcode decoding path, the default case only
breaks out but without setting "ret" value to EMULATE_FAIL. This leaves
run->mmio.len uninitialized (stale from a previous MMIO operation) while
"ret" value remains EMULATE_DO_MMIO, causing the code to proceed with an
incorrect MMIO length.
Add "ret = EMULATE_FAIL" to match the other default branches in the same
function (e.g. the 0x28...0x2e and 0x38 cases).
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
It doesn't make sense to return the recommended maximum number of vCPUs
which exceeds the maximum possible number of vCPUs.
Other architectures have already done this, such as commit 57a2e13ebd
("KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS")
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Insert the appropriate UNWIND hint into the kvm_exc_entry assembly
function to guide the generation of correct ORC table entries, thereby
solving the timeout problem ("unreliable stack") while loading the
livepatch-sample module on a physical machine running virtual machines
with multiple vcpus.
Cc: stable@vger.kernel.org
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
If we directly compile the switch.S file into the kernel, the address of
the kvm_exc_entry function will definitely be within the DMW memory area.
Therefore, we will no longer need to perform a copy relocation of the
kvm_exc_entry.
So this patch compiles switch.S directly into the kernel, and then remove
the copy relocation execution logic for the kvm_exc_entry function.
Cc: stable@vger.kernel.org
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The custom definition is identical to the generic fallback one.
So remove it.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When firmware enables 64-bit PCI host bridge support, some root bridges
already provide valid 64-bit mem resource windows through ACPI.
In this case, the LoongArch-specific mem resource high-bits fixup in
acpi_prepare_root_resources() should not be applied unconditionally.
Otherwise, the kernel may override the native resource layout derived
from firmware, and later BAR assignment can fail to place device BARs
into the intended 64-bit address space correctly.
Add a per-root-bridge ACPI flag, PCIH, and evaluate it from the current
root bridge device scope. When PCIH is set, skip the mem resource high-
bits fixup path and let the kernel use the firmware-provided resource
description directly. When PCIH is absent or cleared, keep the existing
behavior and continue filling the high address bits from the host bridge
address.
This makes the behavior per-root-bridge configurable and avoids breaking
valid 64-bit BAR space allocation on bridges whose 64-bit windows have
already been fully described by firmware.
Cc: stable@vger.kernel.org
Suggested-by: Chao Li <lichao@loongson.cn>
Tested-by: Dongyan Qian <qiandongyan@loongson.cn>
Signed-off-by: Dongyan Qian <qiandongyan@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The SYM_SIGFUNC_START definition should match sigcontext that the length
of GPRs are 8 bytes for both 32BIT and 64BIT. So replace SZREG with 8 to
fix it.
Cc: stable@vger.kernel.org
Fixes: e4878c37f6 ("LoongArch: vDSO: Emit GNU_EH_FRAME correctly")
Suggested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Clang/LLVM build needs -m32/-m64 to switch triple variants (i.e. the
--target=xxx parameter). Otherwise we get build errors for CONFIG_32BIT.
GCC doesn't support -m32/-m64 now, but maybe support in future, so use
cc-option to specify them.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604232041.ESJDwVG4-lkp@intel.com/
Suggested-by: Nathan Chancellor <nathan@kernel.org
Tested-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
CONFIG_64BIT is the mandatory option before v7.0, but in v7.1-rc1 both
CONFIG_32BIT and CONFIG_64BIT are selectable and CONFIG_32BIT became the
default option. This breaks existing configurations, so explicitly make
CONFIG_64BIT as the default option to keep existing behavior.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
1, Adjust build infrastructure for 32BIT/64BIT;
2, Add HIGHMEM (PKMAP and FIX_KMAP) support;
3, Show and handle CPU vulnerabilites correctly;
4, Batch the icache maintenance for jump_label;
5, Add more atomic instructions support for BPF JIT;
6, Add more features (e.g. fsession) support for BPF trampoline;
7, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=FiFl
-----END PGP SIGNATURE-----
Merge tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust build infrastructure for 32BIT/64BIT
- Add HIGHMEM (PKMAP and FIX_KMAP) support
- Show and handle CPU vulnerabilites correctly
- Batch the icache maintenance for jump_label
- Add more atomic instructions support for BPF JIT
- Add more features (e.g. fsession) support for BPF trampoline
- Some bug fixes and other small changes
* tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (21 commits)
selftests/bpf: Enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch
LoongArch: BPF: Add fsession support for trampolines
LoongArch: BPF: Introduce emit_store_stack_imm64() helper
LoongArch: BPF: Support up to 12 function arguments for trampoline
LoongArch: BPF: Support small struct arguments for trampoline
LoongArch: BPF: Open code and remove invoke_bpf_mod_ret()
LoongArch: BPF: Support load-acquire and store-release instructions
LoongArch: BPF: Support 8 and 16 bit read-modify-write instructions
LoongArch: BPF: Add the default case in emit_atomic() and rename it
LoongArch: Define instruction formats for AM{SWAP/ADD}.{B/H} and DBAR
LoongArch: Batch the icache maintenance for jump_label
LoongArch: Add flush_icache_all()/local_flush_icache_all()
LoongArch: Add spectre boundry for syscall dispatch table
LoongArch: Show CPU vulnerabilites correctly
LoongArch: Make arch_irq_work_has_interrupt() true only if IPI HW exist
LoongArch: Use get_random_canary() for stack canary init
LoongArch: Improve the logging of disabling KASLR
LoongArch: Align FPU register state to 32 bytes
LoongArch: Handle CONFIG_32BIT in syscall_get_arch()
LoongArch: Add HIGHMEM (PKMAP and FIX_KMAP) support
...
Implement BPF_TRACE_FSESSION support in LoongArch BPF JIT. The logic
here is almost identical to what has been done in RISC-V JIT.
The key changes are:
- Allocate stack space for function meta and session cookies
- Introduce invoke_bpf() as a wrapper around invoke_bpf_prog() that
populates session cookies before each invocation
- Implement bpf_jit_supports_fsession() callback
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Reviewed-by: Menglong Dong <menglong8.dong@gmail.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Introduce a helper to store 64-bit immediate on the trampoline stack.
The helper will be used in the next patch. Also refactor the existing
code to use this helper.
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Reviewed-by: Menglong Dong <menglong8.dong@gmail.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently, LoongArch bpf trampoline supports up to 8 function arguments.
According to the statistics from commit 473e3150e3 ("bpf, x86: allow
function arguments up to 12 for TRACING"), there are over 200 functions
accept 9 to 12 arguments, so add 12 arguments support for trampoline.
With this patch, the following related testcases passed:
sudo ./test_progs -a tracing_struct/struct_many_args
sudo ./test_progs -a fentry_test/fentry_many_args
sudo ./test_progs -a fexit_test/fexit_many_args
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In the current BPF code, the struct argument size is at most 16 bytes,
enforced by the verifier. According to the Procedure Call Standard for
LoongArch, the struct argument size below 16 bytes are provided as part
of the 8 argument registers, that is to say, the struct argument may be
passed in a pair of registers if its size is more than 8 bytes and no
more than 16 bytes.
Extend the BPF trampoline JIT to support attachment to functions that
take small structures (up to 16 bytes) as argument, save and restore a
number of "argument registers" rather than a number of arguments.
With this patch, the following related testcases passed:
sudo ./test_progs -a tracing_struct/struct_args
sudo ./test_progs -a tracing_struct/union_args
Link: https://github.com/loongson/la-abi-specs/blob/release/lapcs.adoc#structures
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
invoke_bpf_mod_ret() is a small wrapper over invoke_bpf_prog(), it
should check the return value of invoke_bpf_prog() and then return
immediately if invoke_bpf_prog() failed, just open code and remove
it due to it is called only once.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Use the LoongArch common memory access instructions with the barrier
'dbar' to support the BPF load-acquire and store-release instructions.
With this patch, the following testcases passed on LoongArch if the
macro CAN_USE_LOAD_ACQ_STORE_REL is usable in bpf selftests:
sudo ./test_progs -t verifier_load_acquire
sudo ./test_progs -t verifier_store_release
sudo ./test_progs -t verifier_precision/bpf_load_acquire
sudo ./test_progs -t verifier_precision/bpf_store_release
sudo ./test_progs -t compute_live_registers/atomic_load_acq_store_rel
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The 8 and 16 bit read-modify-write instructions {amadd/amswap}.{b/h}
were newly added in the latest LoongArch Reference Manual, use them to
avoid the error of unknown opcode if possible.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Like the other archs such as x86 and riscv, add the default case
in emit_atomic() to print an error message for the invalid opcode
and return -EINVAL, then make its return type as int.
While at it, given that all of the instructions in emit_atomic()
are only read-modify-write instructions, rename emit_atomic() to
emit_atomic_rmw() to make it clear, because there will be a new
function emit_atomic_ld_st() for load-acquire and store-release
instructions in the later patch.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The 8 and 16 bit read-modify-write atomic instructions amadd.{b/h} and
amswap.{b/h} were newly added in the latest LoongArch Reference Manual,
define the instruction format and check whether support via CPUCFG.
Furthermore, define the instruction format for DBAR which will be used
to support BPF load-acquire and store-release instructions.
This is preparation for later patches.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Switch to the batched version of the jump label update functions so
instruction cache maintenance is deferred until the end of the update.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch maintains ICache/DCache coherency by hardware, so we just need
"ibar 0" to avoid instruction hazard here.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The LoongArch syscall number is directly controlled by userspace, but
does not have a array_index_nospec() boundry to prevent access past the
syscall function pointer tables.
Cc: stable@vger.kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Most LoongArch processors are vulnerable to Spectre-V1 Proof-of-Concept
(PoC). And the generic mechanism, __user pointer sanitization, can be
used as a mitigation. This means to use array_index_nospec() to prevent
out of boundry access in syscall and other critical paths.
Implement the arch-specific cpu_show_spectre_v1() to show CPU Spectre-V1
vulnerabilites correctly.
Cc: stable@vger.kernel.org
Link: https://cc-sw.com/chinese-loongarch-architecture-evaluation-part-3-of-3/
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
After commit 7c405fb327 ("rcu: Use an intermediate irq_work to
start process_srcu()"), Loongson-2K0300/2K0500 fail to boot. Because
IRQ_WORK need IPI but Loongson-2K0300/2K0500 don't have IPI HW.
So make arch_irq_work_has_interrupt() return true only if IPI HW exist.
Cc: stable@vger.kernel.org
Reported-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Like others, replace the custom stack canary initialization with the
get_random_canary() helper, following the pattern established in commit
622754e84b ("stackprotector: actually use get_random_canary()").
Signed-off-by: Luo Qiu <luoqiu@kylinsec.com.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Whether KASLR is disabled is not handled in nokaslr() which is the early
param "nokaslr" setup function, but in kaslr_disabled(). However, the
logging was previously done in nokaslr() and lack detail. So we move the
logging to the right place and add more specific infomation about why it
is disabled.
Suggested-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuqian Yang <yangyuqian@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Move fpr to the beginning of struct loongarch_fpu so it is naturally
aligned to FPU_ALIGN (32 bytes), improving 256-bit SIMD (LASX) context
switch performance.
Also adjust process.c and fpu.S to work well with the new loongarch_fpu
layout.
Signed-off-by: Lisa Robinson <lisa@bytefly.space>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
If CONFIG_32BIT is set, it should return AUDIT_ARCH_LOONGARCH32 instead
of AUDIT_ARCH_LOONGARCH64 in syscall_get_arch().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add HIGHMEM (High Memory) support for LoongArch, mostly needed by 32BIT
kernel because the size of kernel virtual memory space is only 512MB and
the size of usable physical memory is only 256MB in this case.
HIGHMEM adds permanent kernel mapping (PKMAP) and fixed kernel mapping
(FIX_KMAP), which increase usable physical memory up to 2.25GB (2304MB).
We can just use the generic copy_user_highpage(), so remove the custom
version.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Adjust build infrastructure (Kconfig, Makefile and ld scripts) to let
us enable both 32BIT/64BIT kernel build.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
-----BEGIN PGP SIGNATURE-----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=79I2
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
"Most of the diff stat comes from Xu Kuohai's fix to emit ENDBR/BTI,
since all JITs had to be touched to move constant blinding out and
pass bpf_verifier_env in.
- Fix use-after-free in arena_vm_close on fork (Alexei Starovoitov)
- Dissociate struct_ops program with map if map_update fails (Amery
Hung)
- Fix out-of-range and off-by-one bugs in arm64 JIT (Daniel Borkmann)
- Fix precedence bug in convert_bpf_ld_abs alignment check (Daniel
Borkmann)
- Fix arg tracking for imprecise/multi-offset in BPF_ST/STX insns
(Eduard Zingerman)
- Copy token from main to subprogs to fix missing kallsyms (Eduard
Zingerman)
- Prevent double close and leak of btf objects in libbpf (Jiri Olsa)
- Fix af_unix null-ptr-deref in sockmap (Michal Luczaj)
- Fix NULL deref in map_kptr_match_type for scalar regs (Mykyta
Yatsenko)
- Avoid unnecessary IPIs. Remove redundant bpf_flush_icache() in
arm64 and riscv JITs (Puranjay Mohan)
- Fix out of bounds access. Validate node_id in arena_alloc_pages()
(Puranjay Mohan)
- Reject BPF-to-BPF calls and callbacks in arm32 JIT (Puranjay Mohan)
- Refactor all JITs to pass bpf_verifier_env to emit ENDBR/BTI for
indirect jump targets on x86-64, arm64 JITs (Xu Kuohai)
- Allow UTF-8 literals in bpf_bprintf_prepare() (Yihan Ding)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (32 commits)
bpf, arm32: Reject BPF-to-BPF calls and callbacks in the JIT
bpf: Dissociate struct_ops program with map if map_update fails
bpf: Validate node_id in arena_alloc_pages()
libbpf: Prevent double close and leak of btf objects
selftests/bpf: cover UTF-8 trace_printk output
bpf: allow UTF-8 literals in bpf_bprintf_prepare()
selftests/bpf: Reject scalar store into kptr slot
bpf: Fix NULL deref in map_kptr_match_type for scalar regs
bpf: Fix precedence bug in convert_bpf_ld_abs alignment check
bpf, arm64: Emit BTI for indirect jump target
bpf, x86: Emit ENDBR for indirect jump targets
bpf: Add helper to detect indirect jump targets
bpf: Pass bpf_verifier_env to JIT
bpf: Move constants blinding out of arch-specific JITs
bpf, sockmap: Take state lock for af_unix iter
bpf, sockmap: Fix af_unix null-ptr-deref in proto update
selftests/bpf: Extend bpf_iter_unix to attempt deadlocking
bpf, sockmap: Fix af_unix iter deadlock
bpf, sockmap: Annotate af_unix sock:: Sk_state data-races
selftests/bpf: verify kallsyms entries for token-loaded subprograms
...
- Add support for tracing in the standalone EL2 hypervisor code, which
should help both debugging and performance analysis. This uses the
new infrastructure for 'remote' trace buffers that can be exposed
by non-kernel entities such as firmware, and which came through the
tracing tree.
- Add support for GICv5 Per Processor Interrupts (PPIs), as the starting
point for supporting the new GIC architecture in KVM.
- Finally add support for pKVM protected guests, where pages are unmapped
from the host as they are faulted into the guest and can be shared back
from the guest using pKVM hypercalls. Protected guests are created
using a new machine type identifier. As the elusive guestmem has not
yet delivered on its promises, anonymous memory is also supported.
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet isolated.
Because this does not really yet bring fully what it promises, it is
hidden behind CONFIG_ARM_PKVM_GUEST + 'kvm-arm.mode=protected', and
also triggers TAINT_USER when a VM is created. Caveat emptor.
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state immutable.
- Expand the Stage-2 page table dumper to support NV shadow page tables
on a per-VM basis.
- Tidy up the pKVM PSCI proxy code to be slightly less hard to follow.
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups.
- A small set of patches fixing the Stage-2 MMU freeing in error cases.
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls.
- The usual cleanups and other selftest churn.
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel().
- Add DMSINTC irqchip in kernel support.
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors.
- Remove restriction on memslot alignment, which is not needed anymore with
the new gmap code.
- Fix LPSW/E to update the bear (which of course is the breaking event
address register).
x86:
- Shut up various UBSAN warnings on reading module parameter before they
were initialized.
- Don't zero-allocate page tables that are used for splitting hugepages in
the TDP MMU, as KVM is guaranteed to set all SPTEs in the page table and
thus write all bytes.
- As an optimization, bail early when trying to unsync 4KiB mappings if the
target gfn can just be mapped with a 2MiB hugepage.
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more precisely
struct kvm_mmio_fragment) to fix use-after-free stack bugs where KVM
would dereference stack pointer after an exit to userspace.
- Clean up and comment the emulated MMIO code to try to make it easier to
maintain (not necessarily "easy", but "easier").
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of VMX
and SVM enabling) as it is needed for trusted I/O.
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one of
KVM's headers that is included multiple times.
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM.
- Exempt SMM from CPUID faulting on Intel, as per the spec.
- Misc hardening and cleanup changes.
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it per-vCPU
so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs.
- Clean up and optimize the OSVW handling, avoiding a bug in which KVM would
overwrite state when enabling virtualization on multiple CPUs in parallel.
This should not be a problem because OSVW should usually be the same for
all CPUs.
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains about a
"too large" size based purely on user input.
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION.
- Disallow synchronizing a VMSA of an already-launched/encrypted vCPU, as
doing so for an SNP guest will crash the host due to an RMP violation
page fault.
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped queries
are required to hold kvm->lock, and enforce it by lockdep. Fix various
bugs where sev_guest() was not ensured to be stable for the whole
duration of a function or ioctl.
- Convert a pile of kvm->lock SEV code to guard().
- Play nicer with userspace that does not enable KVM_CAP_EXCEPTION_PAYLOAD,
for which KVM needs to set CR2 and DR6 as a response to ioctls such as
KVM_GET_VCPU_EVENTS (even if the payload would end up in EXITINFO2
rather than CR2, for example). Only set CR2 and DR6 when consumption of
the payload is imminent, but on the other hand force delivery of the
payload in all paths where userspace retrieves CR2 or DR6.
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT instead
of vmcb02->save.cr2. The value is out of sync after a save/restore
or after a #PF is injected into L2.
- Fix a class of nSVM bugs where some fields written by the CPU are not
synchronized from vmcb02 to cached vmcb12 after VMRUN, and so are not
up-to-date when saved by KVM_GET_NESTED_STATE.
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE and
KVM_SET_{S}REGS could cause vmcb02 to be incorrectly initialized after
save+restore.
- Add a variety of missing nSVM consistency checks.
- Fix several bugs where KVM failed to correctly update VMCB fields on
nested #VMEXIT.
- Fix several bugs where KVM failed to correctly synthesize #UD or #GP for
SVM-related instructions.
- Add support for save+restore of virtualized LBRs (on SVM).
- Refactor various helpers and macros to improve clarity and (hopefully)
make the code easier to maintain.
- Aggressively sanitize fields when copying from vmcb12, to guard against
unintentionally allowing L1 to utilize yet-to-be-defined features.
- Fix several bugs where KVM botched rAX legality checks when emulating SVM
instructions. There are remaining issues in that KVM doesn't handle size
prefix overrides for 64-bit guests.
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails instead of
somewhat arbitrarily synthesizing #GP (i.e. don't double down on AMD's
architectural but sketchy behavior of generating #GP for "unsupported"
addresses).
- Cache all used vmcb12 fields to further harden against TOCTOU bugs.
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros.
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate.
- Code cleanups.
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't support
reclaim, the memory is unevictable, and there is no storage to write
back to.
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests.
x86 selftests:
- Add support for Hygon CPUs in KVM selftests.
- Fix a bug in the MSR test where it would get false failures on AMD/Hygon
CPUs with exactly one of RDPID or RDTSCP.
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test for a
bug where the kernel would attempt to collapse guest_memfd folios against
KVM's will.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnftRQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPAzwf+NKO4Ktv+7A22ImN0SBl0nlUuulsz
vTcw3+hxdRoIw83GdNS+hG5js0wrpMDnbv3t4+VliDNBSSxrBzcSWX2wpilW0Xtw
qGo1MWhs2lKPy1NlaRVOwPS6j7uF3AR0TQ1iQLGMedQuCU9WpiKJxyhNXJdbLrt3
8EgFzsvtEsv+jKNRUNDf9+d0j4gZsFyIe+Brhianbw+u3/UCiUClLCdsKPc4+5ZX
08otYXytacGNIf/5Ev1vT4pHkHL0yqKXAtX7LEtaS3+0KrPuLjV4slemivzE9vf5
Evafm5AhA4wpaNMb1ZerhY3T94lsMaJpWxotjR//0Q7C9B59pCQnXCm8mg==
=CcE0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
Total patches: 126
Reviews/patch: 0.92
Reviewed rate: 76%
- The 2 patch series "pid: make sub-init creation retryable" from Oleg
Nesterov increases the robustness of our creation of init in a new
namespace. By clearing away some historical cruft which is no longer
needed. Also some documentation fixups are provided.
- The 2 patch series "selftests/fchmodat2: Error handling and general"
from Mark Brown has a fixup and a cleanup for the fchmodat2() syscall
selftest.
- The 3 patch series "lib: polynomial: Move to math/ and clean up" from
Andy Shevchenko does as advertised.
- The 3 patch series "hung_task: Provide runtime reset interface for
hung task detector" from Aaron Tomlin gives administrators the ability
to zero out /proc/sys/kernel/hung_task_detect_count.
- The 2 patch series "tools/getdelays: use the static UAPI headers from
tools/include/uapi" from Thomas Weißschuh teaches getdelays to use the
in-kernel UAPI headers rather than the system-provided ones.
- The 5 patch series "watchdog/hardlockup: Improvements to hardlockup"
from Mayank Rungta provides several cleanups and fixups to the
hardlockup detector code and its documentation.
- The 2 patch series "lib/bch: fix undefined behavior from signed
left-shifts" from Josh Law provides a couple of small/theoretical fixes
in the bch code.
- The 2 patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()"
from Junrui Luo does what is claims.
- The 27 patch series "cleanup the RAID5 XOR library" from Christoph
Hellwig is a quite far-reaching cleanup to this code. I can't do better
than to quote Christoph:
The XOR library used for the RAID5 parity is a bit of a mess right
now. The main file sits in crypto/ despite not being cryptography and
not using the crypto API, with the generic implementations sitting in
include/asm-generic and the arch implementations sitting in an asm/
header in theory. The latter doesn't work for many cases, so
architectures often build the code directly into the core kernel, or
create another module for the architecture code.
Change this to a single module in lib/ that also contains the
architecture optimizations, similar to the library work Eric Biggers
has done for the CRC and crypto libraries later. After that it
changes to better calling conventions that allow for smarter
architecture implementations (although none is contained here yet),
and uses static_call to avoid indirection function call overhead.
- The 2 patch series "lib/list_sort: Clean up list_sort() scheduling
workarounds" from Kuan-Wei Chiu cleans up this library code by removing
a hacky thing which was added for UBIFS, which UBIFS doesn't actually
need.
- The 5 patch series "Fix bugs in extract_iter_to_sg()" from Christian
Ehrhardt fixes a few bugs in the scatterlist code, adds in-kernel tests
for the now-fixed bugs and fixes a leak in the test itself.
- The 3 patch series "kdump: Enable LUKS-encrypted dump target support
in ARM64 and PowerPC" from Coiby Xu eenables support of the
LUKS-encrypted device dump target on arm64 and powerpc.
- The 4 patch series "ocfs2: consolidate extent list validation into
block read callbacks" from Joseph Qi addresses ocfs2's validation of
extent list fields - cleanup, simplification, robustness. (Kernel test
robot loves mounting corrupted fs images!)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCad90rQAKCRDdBJ7gKXxA
jl7rAQD4/Rq7ZSSnEv6FS4gOwc3MgTdWcZZaXkqL1KiWyYhRwAEA+cVCO344+AKb
znBOjet/hUr+/kBwyViifiC8LHzchwM=
=Nfnf
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "pid: make sub-init creation retryable" (Oleg Nesterov)
Make creation of init in a new namespace more robust by clearing away
some historical cruft which is no longer needed. Also some
documentation fixups
- "selftests/fchmodat2: Error handling and general" (Mark Brown)
Fix and a cleanup for the fchmodat2() syscall selftest
- "lib: polynomial: Move to math/ and clean up" (Andy Shevchenko)
- "hung_task: Provide runtime reset interface for hung task detector"
(Aaron Tomlin)
Give administrators the ability to zero out
/proc/sys/kernel/hung_task_detect_count
- "tools/getdelays: use the static UAPI headers from
tools/include/uapi" (Thomas Weißschuh)
Teach getdelays to use the in-kernel UAPI headers rather than the
system-provided ones
- "watchdog/hardlockup: Improvements to hardlockup" (Mayank Rungta)
Several cleanups and fixups to the hardlockup detector code and its
documentation
- "lib/bch: fix undefined behavior from signed left-shifts" (Josh Law)
A couple of small/theoretical fixes in the bch code
- "ocfs2/dlm: fix two bugs in dlm_match_regions()" (Junrui Luo)
- "cleanup the RAID5 XOR library" (Christoph Hellwig)
A quite far-reaching cleanup to this code. I can't do better than to
quote Christoph:
"The XOR library used for the RAID5 parity is a bit of a mess right
now. The main file sits in crypto/ despite not being cryptography
and not using the crypto API, with the generic implementations
sitting in include/asm-generic and the arch implementations
sitting in an asm/ header in theory. The latter doesn't work for
many cases, so architectures often build the code directly into
the core kernel, or create another module for the architecture
code.
Change this to a single module in lib/ that also contains the
architecture optimizations, similar to the library work Eric
Biggers has done for the CRC and crypto libraries later. After
that it changes to better calling conventions that allow for
smarter architecture implementations (although none is contained
here yet), and uses static_call to avoid indirection function call
overhead"
- "lib/list_sort: Clean up list_sort() scheduling workarounds"
(Kuan-Wei Chiu)
Clean up this library code by removing a hacky thing which was added
for UBIFS, which UBIFS doesn't actually need
- "Fix bugs in extract_iter_to_sg()" (Christian Ehrhardt)
Fix a few bugs in the scatterlist code, add in-kernel tests for the
now-fixed bugs and fix a leak in the test itself
- "kdump: Enable LUKS-encrypted dump target support in ARM64 and
PowerPC" (Coiby Xu)
Enable support of the LUKS-encrypted device dump target on arm64 and
powerpc
- "ocfs2: consolidate extent list validation into block read callbacks"
(Joseph Qi)
Cleanup, simplify, and make more robust ocfs2's validation of extent
list fields (Kernel test robot loves mounting corrupted fs images!)
* tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (127 commits)
ocfs2: validate group add input before caching
ocfs2: validate bg_bits during freefrag scan
ocfs2: fix listxattr handling when the buffer is full
doc: watchdog: fix typos etc
update Sean's email address
ocfs2: use get_random_u32() where appropriate
ocfs2: split transactions in dio completion to avoid credit exhaustion
ocfs2: remove redundant l_next_free_rec check in __ocfs2_find_path()
ocfs2: validate extent block list fields during block read
ocfs2: remove empty extent list check in ocfs2_dx_dir_lookup_rec()
ocfs2: validate dx_root extent list fields during block read
ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY
ocfs2: handle invalid dinode in ocfs2_group_extend
.get_maintainer.ignore: add Askar
ocfs2: validate bg_list extent bounds in discontig groups
checkpatch: exclude forward declarations of const structs
tools/accounting: handle truncated taskstats netlink messages
taskstats: set version in TGID exit notifications
ocfs2/heartbeat: fix slot mapping rollback leaks on error paths
arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel
...
Pass bpf_verifier_env to bpf_int_jit_compile(). The follow-up patch will
use env->insn_aux_data in the JIT stage to detect indirect jump targets.
Since bpf_prog_select_runtime() can be called by cbpf and lib/test_bpf.c
code without verifier, introduce helper __bpf_prog_select_runtime()
to accept the env parameter.
Remove the call to bpf_prog_select_runtime() in bpf_prog_load(), and
switch to call __bpf_prog_select_runtime() in the verifier, with env
variable passed. The original bpf_prog_select_runtime() is preserved for
cbpf and lib/test_bpf.c, where env is NULL.
Now all constants blinding calls are moved into the verifier, except
the cbpf and lib/test_bpf.c cases. The instructions arrays are adjusted
by bpf_patch_insn_data() function for normal cases, so there is no need
to call adjust_insn_arrays() in bpf_jit_blind_constants(). Remove it.
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> # v12
Acked-by: Hengqi Chen <hengqi.chen@gmail.com> # v14
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-3-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
During the JIT stage, constants blinding rewrites instructions but only
rewrites the private instruction copy of the JITed subprog, leaving the
global env->prog->insnsi and env->insn_aux_data untouched. This causes a
mismatch between subprog instructions and the global state, making it
difficult to use the global data in the JIT.
To avoid this mismatch, and given that all arch-specific JITs already
support constants blinding, move it to the generic verifier code, and
switch to rewrite the global env->prog->insnsi with the global states
adjusted, as other rewrites in the verifier do.
This removes the constants blinding calls in each JIT, which are largely
duplicated code across architectures.
Since constants blinding is only required for JIT, and there are two
JIT entry functions, jit_subprogs() for BPF programs with multiple
subprogs and bpf_prog_select_runtime() for programs with no subprogs,
move the constants blinding invocation into these two functions.
In the verifier path, bpf_patch_insn_data() is used to keep global
verifier auxiliary data in sync with patched instructions. A key
question is whether this global auxiliary data should be restored
on the failure path.
Besides instructions, bpf_patch_insn_data() adjusts:
- prog->aux->poke_tab
- env->insn_array_maps
- env->subprog_info
- env->insn_aux_data
For prog->aux->poke_tab, it is only used by JIT or only meaningful after
JIT succeeds, so it does not need to be restored on the failure path.
For env->insn_array_maps, when JIT fails, programs using insn arrays
are rejected by bpf_insn_array_ready() due to missing JIT addresses.
Hence, env->insn_array_maps is only meaningful for JIT and does not need
to be restored.
For subprog_info, if jit_subprogs fails and CONFIG_BPF_JIT_ALWAYS_ON
is not enabled, kernel falls back to interpreter. In this case,
env->subprog_info is used to determine subprogram stack depth. So it
must be restored on failure.
For env->insn_aux_data, it is freed by clear_insn_aux_data() at the
end of bpf_check(). Before freeing, clear_insn_aux_data() loops over
env->insn_aux_data to release jump targets recorded in it. The loop
uses env->prog->len as the array length, but this length no longer
matches the actual size of the adjusted env->insn_aux_data array after
constants blinding.
To address it, a simple approach is to keep insn_aux_data as adjusted
after failure, since it will be freed shortly, and record its actual size
for the loop in clear_insn_aux_data(). But since clear_insn_aux_data()
uses the same index to loop over both env->prog->insnsi and env->insn_aux_data,
this approach results in incorrect index for the insnsi array. So an
alternative approach is adopted: clone the original env->insn_aux_data
before blinding and restore it after failure, similar to env->prog.
For classic BPF programs, constants blinding works as before since it
is still invoked from bpf_prog_select_runtime().
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com> # powerpc jit
Reviewed-by: Pu Lehui <pulehui@huawei.com> # riscv jit
Acked-by: Hengqi Chen <hengqi.chen@gmail.com> # loongarch jit
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-2-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Everything:
Total patches: 368
Reviews/patch: 1.56
Reviewed rate: 74%
Excluding DAMON:
Total patches: 316
Reviews/patch: 1.77
Reviewed rate: 81%
Excluding DAMON and zram:
Total patches: 306
Reviews/patch: 1.81
Reviewed rate: 82%
Excluding DAMON, zram and maple_tree:
Total patches: 276
Reviews/patch: 2.01
Reviewed rate: 91%
Significant patch series in this merge:
- The 30 patch series "maple_tree: Replace big node with maple copy"
from Liam Howlett is mainly prepararatory work for ongoing development
but it does reduce stack usage and is an improvement.
- The 12 patch series "mm, swap: swap table phase III: remove swap_map"
from Kairui Song offers memory savings by removing the static swap_map.
It also yields some CPU savings and implements several cleanups.
- The 2 patch series "mm: memfd_luo: preserve file seals" from Pratyush
Yadav adds file seal preservation to LUO's memfd code.
- The 2 patch series "mm: zswap: add per-memcg stat for incompressible
pages" from Jiayuan Chen adds additional userspace stats reportng to
zswap.
- The 4 patch series "arch, mm: consolidate empty_zero_page" from Mike
Rapoport implements some cleanups for our handling of ZERO_PAGE() and
zero_pfn.
- The 2 patch series "mm/kmemleak: Improve scan_should_stop()
implementation" from Zhongqiu Han provides an robustness improvement and
some cleanups in the kmemleak code.
- The 4 patch series "Improve khugepaged scan logic" from Vernon Yang
"improves the khugepaged scan logic and reduces CPU consumption by
prioritizing scanning tasks that access memory frequently".
- The 2 patch series "Make KHO Stateless" from Jason Miu simplifies
Kexec Handover by "transitioning KHO from an xarray-based metadata
tracking system with serialization to a radix tree data structure that
can be passed directly to the next kernel"
- The 3 patch series "mm: vmscan: add PID and cgroup ID to vmscan
tracepoints" from Thomas Ballasi and Steven Rostedt enhances vmscan's
tracepointing.
- The 5 patch series "mm: arch/shstk: Common shadow stack mapping helper
and VM_NOHUGEPAGE" from Catalin Marinas is a cleanup for the shadow
stack code: remove per-arch code in favour of a generic implementation.
- The 2 patch series "Fix KASAN support for KHO restored vmalloc
regions" from Pasha Tatashin fixes a WARN() which can be emitted the KHO
restores a vmalloc area.
- The 4 patch series "mm: Remove stray references to pagevec" from Tal
Zussman provides several cleanups, mainly udpating references to "struct
pagevec", which became folio_batch three years ago.
- The 17 patch series "mm: Eliminate fake head pages from vmemmap
optimization" from Kiryl Shutsemau simplifies the HugeTLB vmemmap
optimization (HVO) by changing how tail pages encode their relationship
to the head page.
- The 2 patch series "mm/damon/core: improve DAMOS quota efficiency for
core layer filters" from SeongJae Park improves two problematic
behaviors of DAMOS that makes it less efficient when core layer filters
are used.
- The 3 patch series "mm/damon: strictly respect min_nr_regions" from
SeongJae Park improves DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter.
- The 3 patch series "mm/page_alloc: pcp locking cleanup" from Vlastimil
Babka is a proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ennsed.
- The 16 patch series "mm: cleanups around unmapping / zapping" from
David Hildenbrand implements "a bunch of cleanups around unmapping and
zapping. Mostly simplifications, code movements, documentation and
renaming of zapping functions".
- The 6 patch series "support batched checking of the young flag for
MGLRU" from Baolin Wang supports batched checking of the young flag for
MGLRU. It's part cleanups; one benchmark shows large performance
benefits for arm64.
- The 5 patch series "memcg: obj stock and slab stat caching cleanups"
from Johannes Weiner provides memcg cleanup and robustness improvements.
- The 5 patch series "Allow order zero pages in page reporting" from
Yuvraj Sakshith enhances page_reporting's free page reporting - it is
presently and undesirably order-0 pages when reporting free memory.
- The 6 patch series "mm: vma flag tweaks" from Lorenzo Stoakes is
cleanup work following from the recent conversion of the VMA flags to a
bitmap.
- The 10 patch series "mm/damon: add optional debugging-purpose sanity
checks" from SeongJae Park adds some more developer-facing debug checks
into DAMON core.
- The 2 patch series "mm/damon: test and document power-of-2
min_region_sz requirement" from SeongJae Park adds an additional DAMON
kunit test and makes some adjustments to the addr_unit parameter
handling.
- The 3 patch series "mm/damon/core: make passed_sample_intervals
comparisons overflow-safe" from SeongJae Park fixes a hard-to-hit time
overflow issue in DAMON core.
- The 7 patch series "mm/damon: improve/fixup/update ratio calculation,
test and documentation" from SeongJae Park is a "batch of misc/minor
improvements and fixups" for DAMON.
- The 4 patch series "mm: move vma_(kernel|mmu)_pagesize() out of
hugetlb.c" from David Hildenbrand fixes a possible issue with dax-device
when CONFIG_HUGETLB=n. Some code movement was required.
- The 6 patch series "zram: recompression cleanups and tweaks" from
Sergey Senozhatsky provides "a somewhat random mix of fixups,
recompression cleanups and improvements" in the zram code.
- The 11 patch series "mm/damon: support multiple goal-based quota
tuning algorithms" from SeongJae Park extend DAMOS quotas goal
auto-tuning to support multiple tuning algorithms that users can select.
- The 4 patch series "mm: thp: reduce unnecessary
start_stop_khugepaged()" from Breno Leitao fixes the khugpaged sysfs
handling so we no longer spam the logs with reams of junk when
starting/stopping khugepaged.
- The 3 patch series "mm: improve map count checks" from Lorenzo Stoakes
provides some cleanups and slight fixes in the mremap, mmap and vma
code.
- The 5 patch series "mm/damon: support addr_unit on default monitoring
targets for modules" from SeongJae Park extends the use of DAMON core's
addr_unit tunable.
- The 5 patch series "mm: khugepaged cleanups and mTHP prerequisites"
from Nico Pache provides cleanups in the khugepaged and is a base for
Nico's planned khugepaged mTHP support.
- The 15 patch series "mm: memory hot(un)plug and SPARSEMEM cleanups"
from David Hildenbrand implements code movement and cleanups in the
memhotplug and sparsemem code.
- The 2 patch series "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and
cleanup CONFIG_MIGRATION" from David Hildenbrand rationalizes some
memhotplug Kconfig support.
- The 6 patch series "change young flag check functions to return bool"
from Baolin Wang is "a cleanup patchset to change all young flag check
functions to return bool".
- The 3 patch series "mm/damon/sysfs: fix memory leak and NULL
dereference issues" from Josh Law and SeongJae Park fixes a few
potential DAMON bugs.
- The 25 patch series "mm/vma: convert vm_flags_t to vma_flags_t in vma
code" from "converts a lot of the existing use of the legacy vm_flags_t
data type to the new vma_flags_t type which replaces it". Mainly in the
vma code.
- The 21 patch series "mm: expand mmap_prepare functionality and usage"
from Lorenzo Stoakes "expands the mmap_prepare functionality, which is
intended to replace the deprecated f_op->mmap hook which has been the
source of bugs and security issues for some time". Cleanups,
documentation, extension of mmap_prepare into filesystem drivers.
- The 13 patch series "mm/huge_memory: refactor zap_huge_pmd()" from
Lorenzo Stoakes simplifies and cleans up zap_huge_pmd(). Additional
cleanups around vm_normal_folio_pmd() and the softleaf functionality are
performed.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCad3HDQAKCRDdBJ7gKXxA
jrUQAPwNhPk5nPSxnyxjAeQtOBHqgCdnICeEismLajPKd9aYRgEA0s2XAu3tSUYi
GrBnWImHG3s4ePQxVcPCegWTsOUrXgQ=
=1Q7o
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
