sctp_inq is never kmalloced, since it's integrated into sctp_ep_common
and only initialized from eps and assocs. Therefore, remove the dead
code from there.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp_ssnmap_init() can only be called from sctp_ssnmap_new()
where malloced is always set to 1. Thus, when we call
sctp_ssnmap_free() the test for map->malloced evaluates always
to true.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Gross says:
====================
A number of improvements for net-next/3.10.
Highlights include:
* Properly exposing linux/openvswitch.h to userspace after the uapi
changes.
* Simplification of locking. It immediately makes things simpler to
reason about and avoids holding RTNL mutex for longer than
necessary. In the near future it will also enable tunnel
registration and more fine-grained locking.
* Miscellaneous cleanups and simplifications.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The latest r1p5-revision of the ARM PL011 UART has 32-byte FIFOs,
while all earlier ones have 16-byte FIFOs. This patch suggests
a way to set the FIFO-size correctly & flexibly by using a member
function named get_fifosize, rather than using the fifosize member
variable. The function takes the UARTPeriphID, and returns the
correct FIFO size.
Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi_subdevice 'private' variable is a void * that is available
for the subdevice to use in manner. It's common in comedi drivers for
the driver to allocate memory for a subdevice and store the pointer
to that memory in the 'private' variable. It's then the responsibility
of the driver to free that memory when the device is detached.
Due to how the attach/detach works in comedi, the drivers need to do
some sanity checking before they can free the allocated memory during
the detach.
Introduce a helper function, comedi_spriv_free(), to handle freeing
the private data allocated for a subdevice. This allows moving all the
sanity checks into the helper function and makes it safe to call
with any context. It also allows removing some of the boilerplate
code in the (*detach) functions.
Remove the subdev_8255_cleanup() export in the 8255 subdevice driver
as well as the addi_watchdog_cleanup() export in the addi_watchdog
driver and use the new helper instead.
The amplc_dio200_common driver uses a number of local helper functions
to free the private data for it's subdevices. Remove those as well and
use the new helper.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the subdevice init during the attach of this driver, private data
is allocated for each subdevice. The pointer to this data is then
saved in the subdevice 's->private' so it can be free'ed during the
detach.
In __unioxx5_subdev_init() an error path exists that can happen before
the allocated pointer is saved in s->private. Make sure the allocated
memory is free'ed before returning the error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the following changes:
- Add sched_clock selection logic to select the highest frequency clock
- Use full 64-bit arch timer counter for sched_clock
- Convert arch timer, sp804 and integrator-cp timers to CLKSRC_OF and
adapt all users to use clocksource_of_init
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRZx0aAAoJEMhvYp4jgsXiB7MH/AutBUa40yuzTA1RzaDxYTX7
m1NrjmsTI8pFLX6VTvtwNXdT1AJ0JbzPxu35E1Y8xsu8tnx/RjG/hhqq8R2rXd5t
oqilT46SPBZpKBSrPSuEQde5v8XlKT5kEcUlg47bHGB1JrI9Ip14okRcg5aCJJzu
Pb25NqxTWS+vFTNV7C+UzuJ72lJ24FHQXK4AbZqaWcaokGCRLP1QE1s83jY7mpX7
zd5xWMPygKR8oYNPVhxoD1ajUo5cqVHtcXFRnWy1o/T/8ZPqCuSOsyJokScPHzwa
vUwoAn2OQSFLJZgITu8+9JSlLxW40BdMHaJ+jTlOXMGDq6RHZY1FHAy8PTf43wU=
=QjNu
-----END PGP SIGNATURE-----
Merge tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux into late/clksrc
This is the 2nd part of ARM timer clean-ups for 3.10. This series has
the following changes:
- Add sched_clock selection logic to select the highest frequency clock
- Use full 64-bit arch timer counter for sched_clock
- Convert arch timer, sp804 and integrator-cp timers to CLKSRC_OF and
adapt all users to use clocksource_of_init
* tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux:
devtree: add binding documentation for sp804
ARM: integrator-cp: convert use CLKSRC_OF for timer init
ARM: versatile: use OF init for sp804 timer
ARM: versatile: add versatile dtbs to dtbs target
ARM: vexpress: remove extra timer-sp control register clearing
ARM: dts: vexpress: disable CA9 core tile sp804 timer
ARM: vexpress: remove sp804 OF init
ARM: highbank: use OF init for sp804 timer
ARM: timer-sp: convert to use CLKSRC_OF init
OF: add empty of_device_is_available for !OF
ARM: convert arm/arm64 arch timer to use CLKSRC_OF init
ARM: make machine_desc->init_time default to clocksource_of_init
ARM: arch_timer: use full 64-bit counter for sched_clock
ARM: make sched_clock just call a function pointer
ARM: sched_clock: allow changing to higher frequency counter
Signed-off-by: Olof Johansson <olof@lixom.net>
This has a nasty set of conflicts with the exynos MCT code, which was
moved in a separate branch, and then fixed up when merged in, but still
conflicts a bit here. It should have been sorted out by this merge though.
This reverts commit 3e13ea450b.
It should go through the scsi tree instead.
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit af0f3a56fa.
It should go through the scsi tree instead.
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allocate port-private data in port-probe rather than in attach.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use port device for debug messages in interrupt-urb callback and remove
unused private data.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the port interrupt-in urb rather managing a private one.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device uses the second interrupt-in endpoint of the interface for
reading. Stop abusing the port read urb and store a pointer to the
second interrupt-in urb as port-private data instead.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the port interrupt-out urb rather than abusing the port write_urb
pointer and allocating a new urb at every open (but the first...).
Note that the write_urb abuse would have led to a double free should
there ever be interfaces with a bulk-out endpoint.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch to the more efficient generic read implementation.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor read-urb processing, and add sanity checks on header and data
lengths.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove redundant data-offset define, which was really just the header
length.
Add payload-size define and use the bulk-out size define for the actual
bulk-out size.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up and fix typos in protocol comment.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure the port private data, which contains the write sequence
number, is cleared at allocation.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the USB PHY layer never returns NULL we don't need
to check for that condition.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't select NOP_USB_XCEIV. Instead, board config
must select USB_PHY and the appropriate PHY driver.
Also add a hint in Kconfig so that users enabling
this driver manually enable the right PHY drivers as well.
Gets rid of the below warnings when USB_EHCI_HCD_OMAP
is enabled.
warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY)
warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY)
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When usbfs receives a ctrl-request from userspace it calls check_ctrlrecip,
which for a request with USB_RECIP_ENDPOINT tries to map this to an interface
to see if this interface is claimed, except for ctrl-requests with a type of
USB_TYPE_VENDOR.
When trying to use this device: http://www.akaipro.com/eiepro
redirected to a Windows vm running on qemu on top of Linux.
The windows driver makes a ctrl-req with USB_TYPE_CLASS and
USB_RECIP_ENDPOINT with index 0, and the mapping of the endpoint (0) to
the interface fails since ep 0 is the ctrl endpoint and thus never is
part of an interface.
This patch fixes this ctrl-req failing by skipping the checkintf call for
USB_RECIP_ENDPOINT ctrl-reqs on the ctrl endpoint.
Reported-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl>
Tested-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reduce the size of the objects by consolidating
the duplicated USB_STORAGE into a single function.
Add function usb_stor_dbg to emit debugging messages.
Always validate the format and arguments.
Reduce the number of uses of CONFIG_USB_STORAGE_DEBUG.
Reduces size of objects ~7KB when CONFIG_USB_STORAGE_DEBUG
is set.
$ size drivers/usb/storage/built-in.o*
text data bss dec hex filename
140133 55296 70312 265741 40e0d drivers/usb/storage/built-in.o.new
147494 55248 70296 273038 42a8e drivers/usb/storage/built-in.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We remove the redundant tdi_reset in ehci_setup since there
is already it in ehci_reset.
It was observed that the duplicated tdi_reset was causing
the PHY_CLK_VALID bit unstable.
Reported-by: Michael Braun <michael-dev@fami-braun.de>
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org> # 3.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable m25p64 SPI flash support on da850-EVM. Also
add partition information of SPI flash.
Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Populate OF_DEV_AUXDATA with desired device name expected by spi-davinci
driver. Without this clk_get of spi-davinci DT driver fails.
Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Follow DT naming convention for compatible property of the blob.
Use first chip name that introduced the specific version of the
device.
Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* pci/cleanup:
PCI: Remove "extern" from function declarations
PCI: Warn about failures instead of "must_check" functions
PCI: Remove __must_check from definitions
PCI: Remove unused variables
PCI: Move cpci_hotplug_init() proto to header file
PCI: Make local functions/structs static
PCI: Fix missing prototype for pcie_port_acpi_setup()
Conflicts:
drivers/pci/hotplug/acpiphp.h
include/linux/pci.h
const qualifier was misplaced in couple of definitions.
This fixes the sparse error:
CHECK arch/arm/mach-davinci/board-mityomapl138.c
arch/arm/mach-davinci/board-da850-evm.c:404:19: error: Just how const do you want this type to be?
arch/arm/mach-davinci/board-da850-evm.c:568:19: error: Just how const do you want this type to be?
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Add .reserve function for reserving CMA memory block to MACHINE_START.
Add call to remoteproc platform device registration function during init.
Signed-off-by: Robert Tivy <rtivy@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
We had an inconsistent mix of using and omitting the "extern" keyword
on function declarations in header files. This removes them all.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
These places capture return values to avoid "must_check" warnings,
but we didn't *do* anything with the return values, which causes
"set but not used" warnings. We might as well do something instead
of just trying to evade the "must_check" warnings.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The __must_check (gcc "warn_unused_result") attribute only makes sense
when compiling the *caller* of the function, so the attribute should
appear on the declaration in the header file, not on the definition.
The declarations of these functions are already annotated with
__must_check.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The flag bus->shutdown implies that the control elements might have
been already destroyed. When a codec is resumed at this state and
tries to call vmaster hook (e.g. in snd_hda_gen_init()), it would
refer to a non-existing object, resulting in Oops in the end.
This patch just adds a check of the flag in the caller side for
avoiding such a crash.
Though, the best would be to clear hook->sw_kctl by the destructor of
the corresponding ctl element, but vmaster uses its own private_free,
it can't be done easily. So let it be for a while.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ben has done valuable work for the I2C subsystem, yet he has been
inactive for ~15 months. Let MAINTAINERS reflect that. He will be
most welcome if he wants to participate again.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: Ben Dooks <ben-linux@fluff.org>
pj4b cpus are LPAE capable so enable them on LPAE compilations
Signed-off-by: Lior Amsalem <alior@marvell.com>
Tested-by: Franklin <flin@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
In kmap_atomic(), kmap_high_get() is invoked for checking already
mapped area. In __flush_dcache_page() and dma_cache_maint_page(),
we explicitly call kmap_high_get() before kmap_atomic()
when cache_is_vipt(), so kmap_high_get() can be invoked twice.
This is useless operation, so remove one.
v2: change cache_is_vipt() to cache_is_vipt_nonaliasing() in order to
be self-documented
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Events may be created with attr->disabled == 1 and attr->enable_on_exec
== 1, which confuses the group validation code because events with the
PERF_EVENT_STATE_OFF are not considered candidates for scheduling, which
may lead to failure at group scheduling time.
This patch fixes the validation check for ARM, so that events in the
OFF state are still considered when enable_on_exec is true.
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Reported-by: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
We must not declare dbg_cpu_pm_nb as __cpuinitdata as we need it after
system initialization for Suspend and CPUIdle.
This was done in commit 9a6eb310ea ("ARM: hw_breakpoint: Debug powerdown
support for self-hosted debug").
Cc: stable@vger.kernel.org
Cc: Dietmar Eggemann <Dietmar.Eggemann@arm.com>
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
On Feroceon the L2 cache becomes non-coherent with the CPU
when the L1 caches are disabled. Thus the L2 needs to be invalidated
after both L1 caches are disabled.
On kexec before the starting the code for relocation the kernel,
the L1 caches are disabled in cpu_froc_fin (cpu_v7_proc_fin for Feroceon),
but after L2 cache is never invalidated, because inv_all is not set
in cache-feroceon-l2.c.
So kernel relocation and decompression may has (and usually has) errors.
Setting the function enables L2 invalidation and fixes the issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Illia Ragozin <illia.ragozin@grapecom.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
tcm_init() call iotable_init() and it use early_alloc variants which
do memblock allocation. Directly using memblock allocation after
initializing bootmem should not permitted, because bootmem can't know
where are additinally reserved.
So move tcm_init() to a safe place before initalizing bootmem.
(On the U300)
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull networking fixes from David Miller:
1) Fix erroneous netfilter drop of SIP packets generated by some Cisco
phones, from Patrick McHardy.
2) Fix netfilter IPSET refcounting in list_set_add(), from Jozsef
Kadlecsik.
3) Fix TCP syncookies route lookup key, we don't use the same values we
would use for the usual SYN receive processing, from Dmitry Popov.
4) Fix NULL deref in bond_slave_netdev_event(), from Nikolay
Aleksandrov.
5) When bonding enslave fails, we can forget to clear the IFF_BONDING
bit, fix also from Nikolay Aleksandrov.
6) skb->csum_start is 16-bits, which is almost always just fine. But
if we reallocate the headroom of an SKB this can push the
skb->csum_start value outside of it's valid range. This can easily
happen when collapsing multiple SKBs from the retransmit queue
together.
Fix from Thomas Graf.
7) Fix NULL deref in be2net driver due to missing check of
__vlan_put_tag() return value, from Ivan Vecera.
8) tun_set_iff() returns zero instead of error code on failure, fix
from Wei Yongjun.
9) Like GARP, 802 MRP needs to hold the app->lock when adding MAD
events and queueing PDUs. Fix from David Ward.
10) Build fix, MVMDIO needs PHYLIB, from Thomas Petazzoni..
11) Fix mac80211 static with ipv6 modular build, from Cong Wang.
12) If userland specifies a path cost explicitly, do not override it
when the carrier state changes. From Stephen Hemminger.
13) mvnets calculates the TX queue to use incorrectly resulting in
garbage pointer derefs and crashes, fix from Willy Tarreau.
14) cdc_mbim does erroneous sizeof(ETH_HLEN). Fix from Bjorn Mork.
15) IP fragmentation can leak a refcount-less route out from an RCU
protected section. This results in crashes and all sorts of hard to
diagnose behavior. Fix from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
qlcnic: fix beaconing test for 82xx adapter
net: drop dst before queueing fragments
net: fec: fix regression in link change accounting
net: cdc_mbim: remove bogus sizeof()
drivers: net: ethernet: cpsw: get slave VLAN id from slave node instead of cpsw node
net: mvneta: fix improper tx queue usage in mvneta_tx()
esp4: fix error return code in esp_output()
bridge: make user modified path cost sticky
ipv6: statically link register_inet6addr_notifier()
net: mvmdio: add select PHYLIB
net/802/mrp: fix possible race condition when calling mrp_pdu_queue()
tuntap: fix error return code in tun_set_iff()
be2net: take care of __vlan_put_tag return value
can: sja1000: fix handling on dt properties on little endian systems
can: mcp251x: add missing IRQF_ONESHOT to request_threaded_irq
netfilter: nf_nat: fix race when unloading protocol modules
tcp: Reallocate headroom if it would overflow csum_start
stmmac: prevent interrupt loop with MMC RX IPC Counter
bonding: IFF_BONDING is not stripped on enslave failure
bonding: fix netdev event NULL pointer dereference
...
Commit b4cbb197c7 ("vm: add vm_iomap_memory() helper function") added
a helper function wrapper around io_remap_pfn_range(), and every other
architecture defined it in <asm/pgtable.h>.
The s390 choice of <asm/io.h> may make sense, but is not very convenient
for this case, and gratuitous differences like that cause unexpected errors like this:
mm/memory.c: In function 'vm_iomap_memory':
mm/memory.c:2439:2: error: implicit declaration of function 'io_remap_pfn_range' [-Werror=implicit-function-declaration]
Glory be the kbuild test robot who noticed this, bisected it, and
reported it to the guilty parties (ie me).
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This code doesn't work on big endian systems because we're storing low
values in the high bits of the unsigned long. It makes it a very high
value instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
