We can't compile a kernel with CONFIG_ALTIVEC=n when
CONFIG_PPC_TRANSACTIONAL_MEM=y. We currently get:
arch/powerpc/kernel/tm.S:320: Error: unsupported relocation against THREAD_VSCR
arch/powerpc/kernel/tm.S:323: Error: unsupported relocation against THREAD_VR0
arch/powerpc/kernel/tm.S:323: Error: unsupported relocation against THREAD_VR0
etc.
The below fixes this with a sprinkling of #ifdefs.
This was found by mpe with kisskb:
http://kisskb.ellerman.id.au/kisskb/buildresult/8539442/
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
The service parameters for the VPI/RPIs were incorrect, resulting in
lower utilization
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
The logic here is better expressed with a switch statement.
While we're here, CLOSED stateids (or stateids of an unkown type--which
would indicate a server bug) should probably return nfserr_bad_stateid,
though this behavior shouldn't affect any non-buggy client.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fixed NMI watch dog panic's when resetting the hba.
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=X1N2
-----END PGP SIGNATURE-----
Merge tag 'devel-samsung-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
From Kukjin Kim <kgene.kim@samsung.com>:
including various development for samsung for v3.10
* tag 'devel-samsung-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: replace cpumask by the corresponding macro
ARM: EXYNOS: handle properly the return values
ARM: EXYNOS: factor out the idle states
ARM: SAMSUNG: check processor type before cache restoration in resume
ARM: S3C64XX: Slow down mic detection rate for wm5102
ARM: S3C64XX: Clear DMA flags on channel request
ARM: EXYNOS: Clear ENABLE_WAKEUP_SW bit when entering suspend
ARM: EXYNOS: Remove hardcode wakeup unmask for EINT_0
ARM: EXYNOS: Add support for rtc wakeup
ARM: SAMSUNG: Export MIPI CSIS/DSIM PHY control functions
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Using bool can make code more readable.
Convert uses and tests of int to bool.
This also makes a comparison of tg3->link_up
(itself bool) a bool comparison instead of int.
Reorder stack variable declarations to make
bool fit declaration holes where appropriate.
$ size drivers/net/ethernet/broadcom/tg3.o*
text data bss dec hex filename
169958 27249 58896 256103 3e867 drivers/net/ethernet/broadcom/tg3.o.new
169968 27249 58896 256113 3e871 drivers/net/ethernet/broadcom/tg3.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The main aim for this cycle is to have the u8540 booting to a
console. However, the u8540 doesn't support all of the u8500
platform devices yet. After this stage is complete we can then
fill in the inadequacies, such as specific clock support at a
later date. To achieve this we're placing devices supported by
all platforms into a common device structure and the remaining
ones into a platform specific one.
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=OIUa
-----END PGP SIGNATURE-----
Merge tag 'secure-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/firmware
From Kukjin Kim <kgene.kim@samsung.com>:
add support secure firmware for exynos
* tag 'secure-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up
ARM: EXYNOS: Add IO mapping for non-secure SYSRAM.
ARM: EXYNOS: Add support for Exynos secure firmware
ARM: EXYNOS: Add support for secure monitor calls
ARM: Add interface for registering and calling firmware-specific operations
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Gets rid of these warnings when compile module for 64 bit targets:
CC drivers/mfd/syscon.o
drivers/mfd/syscon.c: In function 'syscon_probe':
drivers/mfd/syscon.c:155:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat]
drivers/mfd/syscon.c:155:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat]
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Fixes build error on x86_64 allmodconfig, introduced by commit
5ab3a89a74 ("mfd: syscon: Add non-DT support").
drivers/regulator/anatop-regulator.c: In function 'anatop_regulator_probe':
drivers/regulator/anatop-regulator.c:134:2: error: implicit declaration of function 'of_get_parent' [-Werror=implicit-function-declaration]
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=L8iS
-----END PGP SIGNATURE-----
Merge tag 'timer-samsung-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers
From Kukjin Kim <kgene.kim@samsung.com>:
including fix for GENERIC_GPIO based on previous pull-request for timer-samsung
* tag 'timer-samsung-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: SAMSUNG: change GENERIC_GPIO to ARCH_REQUIRE_GPIOLIB
Signed-off-by: Arnd Bergmann <arnd@anrdb.de>
Negotiation of the 4.1 session forechannel attributes is a mess. Fix:
- Move it all into check_forechannel_attrs instead of spreading
it between that, alloc_session, and init_forechannel_attrs.
- set a minimum "slotsize" so that our drc memory limits apply
even for small maxresponsesize_cached. This also fixes some
bugs when slotsize becomes <= 0.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Os9U
-----END PGP SIGNATURE-----
Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers
From Kukjin Kim <kgene.kim@samsung.com>:
add support exynos mct device tree and move into drivers/clocksource
* tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
clocksource: mct: Add terminating entry for exynos_mct_ids table
clocksource: mct: Add missing semicolons in exynos_mct.c
ARM: EXYNOS: move mct driver to drivers/clocksource
ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5
ARM: dts: add mct device tree node for all supported Exynos SoC's
ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init
ARM: EXYNOS: add device tree support for MCT controller driver
ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it
ARM: EXYNOS: add a register base address variable in mct controller driver
Conflicts:
drivers/clocksource/Makefile
drivers/clocksource/exynos_mct.c
[arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Sitv
-----END PGP SIGNATURE-----
Merge tag 'irq-s3c24xx-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers
From Kukjin Kim <kgene.kim@samsung.com>:
s3c24xx irq cleanup and move into drivers/irqchip
* tag 'irq-s3c24xx-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
irqchip: s3c24xx: add devicetree support
irqchip: s3c24xx: make interrupt handling independent of irq_domain structure
irqchip: s3c24xx: globally keep track of the created intc instances
irqchip: s3c24xx: add irq_set_type callback for basic interrupt types
irqchip: s3c24xx: fix irqlist of second s3c2416 controller
irqchip: s3c24xx: fix comments on some camera interrupts
ARM: S3C24XX: move irq driver to drivers/irqchip
ARM: S3C24XX: add handle_irq function
ARM: S3C24XX: make s3c24xx_init_intc static
ARM: S3C24XX: move s3c24xx_init_irq to s3c2410_init_irq
ARM: S3C24XX: fix irq parent check
ARM: S3C24XX: fix redundant checks in the irq mapping function
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The tegra assembly files are written for ARMv7 and are not compatible
with ARMv6, which leads to build warnings when compiling a dual
ARMv6/v7 kernel. Since this code is only ever run on Tegra ARMv7
hardware, we can tell the assembler which architecture level to
use.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This branch enhances the support for running dtc on device tree files.
A dedicated directory is created for header files that provide constants
for device-tree bindings.
The kbuild dependency script processor is enhanced to support processing
the dependency outputs from multiple separate commands at once.
The kbuild dtc rule is modified so that the C pre-processor is always
applied when compiling any device tree.
Some standard headers are created which define common constants for GPIO,
IRQ, and ARM GIC device tree bindings.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=4/RH
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.10-dtc-cpp-chroot-std-headers' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into for-next
Pull DT C pre-processor changes from Stephen Warren:
dt: run C pre-processor on *.dts, create some standard headers
This branch enhances the support for running dtc on device tree files.
A dedicated directory is created for header files that provide constants
for device-tree bindings.
The kbuild dependency script processor is enhanced to support processing
the dependency outputs from multiple separate commands at once.
The kbuild dtc rule is modified so that the C pre-processor is always
applied when compiling any device tree.
Some standard headers are created which define common constants for GPIO,
IRQ, and ARM GIC device tree bindings.
Fix the following compilation warnings (in Simon Horman's renesas.git repo):
In file included from arch/arm/mach-shmobile/setup-r8a7779.c:24:0:
include/linux/of_platform.h:107:13: warning: ‘struct of_device_id’ declared
inside parameter list [enabled by default]
include/linux/of_platform.h:107:13: warning: its scope is only this definition
or declaration, which is probably not what you want [enabled by default]
include/linux/of_platform.h:107:13: warning: ‘struct device_node’ declared
inside parameter list [enabled by default]
<linux/of_platform.h> only #include's headers with definitions of the above
mentioned structures if CONFIG_OF_DEVICE=y but uses them even if not. One
solution is to move some #include's out of #ifdef CONFIG_OF_DEVICE and use
incomplete declarations for the rest of the structures where the #ifdef move
doesn't help...
Reported-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Pass this struct by reference, not by value, and return an error instead
of a boolean to allow for future additions.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are actually overflow bug and typo. And bug was never happened due to the
typo.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
arch_local_irq_save() and friends are required to act as compiler
memory barriers. This patch adds a "memory" clobber to the inline
asm code in arch_local_irq_restore() which is used as the building
block for other functions needing to set/clear the interrupt enable
in the CSR register.
Signed-off-by: Mark Salter <msalter@redhat.com>
The TWD and SCU configs are selected by default as long as
MSM_SCORPIONMP is false and/or MCT is false. Implementing the
logic this way certainly saves lines in the Kconfig but it
precludes those machines which select MSM_SCORPIONMP or MCT from
participating in the single zImage effort because when those
machines are combined with other SMP capable machines the TWD and
SCU are no longer selected by default.
Push the select out to the machine entries so that we can compile
these machines together and still select the appropriate configs.
Cc: Barry Song <baohua.song@csr.com>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Simon Horman <horms@verge.net.au>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull vfs fixes from Al Viro:
"A nasty bug in fs/namespace.c caught by Andrey + a couple of less
serious unpleasantness - ecryptfs misc device playing hopeless games
with try_module_get() and palinfo procfs support being... not quite
correctly done, to be polite."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
mnt: release locks on error path in do_loopback
palinfo fixes
procfs: add proc_remove_subtree()
ecryptfs: close rmmod race
a cleanup.
The fix is to the dummy driver for some inconsistent specification of
parameters available vs parameters supplied.
The cleanup is for some silly memcmp usage.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=Ere9
-----END PGP SIGNATURE-----
Merge tag 'iio-for-3.10d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Fourth set of changes for iio in the 3.10 cycle. This time just a fix an
a cleanup.
The fix is to the dummy driver for some inconsistent specification of
parameters available vs parameters supplied.
The cleanup is for some silly memcmp usage.
* serialize the call of ->release() on per-pdeo mutex
* don't remove pdeo from per-pde list until we are through with it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Switch huge if-statement in __proc_file_read() around. This then puts the
single line loop break immediately after the if-statement and allows us to
de-indent the huge comment and make it take fewer lines. The code following
the if-statement then follows naturally from the call to dp->read_proc().
Signed-off-by: David Howells <dhowells@redhat.com>
Nithin Nayak Sujir says:
====================
This patch and the following two patches add support for link flap avoidance
by maintaining the link on power down. This feature is required for
management capable devices to have the management connection
uninterrupted on driver reload, reboot and interface up/down.
The other pros of this feature are
- It speeds up boot up time by several seconds as DHCP addresses can be
acquired faster.
- It avoids lengthy Spanning Tree delay.
On powerup the hardware brings up the phy with default settings. If the
link is not up, the management software configures the phy to gigabit
and starts autonegotiate. Subsequently, as long as the link is up, the
driver and management refrain from resetting and/or changing any
configuration that the link depends on.
The LNK_FLAP_AVOID setting is an NVRAM user configurable bit and is
disabled by default. If this setting is enabled, we skip powering down
the phy and resetting it.
A second NVRAM setting is 1G_ON_VAUX_OK (off by default). This adds
support for gigabit link speed when device is on auxiliary power.
====================
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When LFA is enabled, we don't reset the phy. But EEE settings changes
don't take effect until the phy is reset. Add a phy reset when we detect
a changed EEE setting.
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Normally on driver load, we set the default settings for speed and flow
control. However, if the default setting is not compatible with the current link
state, we would autonegotiate and cause a link flap. To avoid this, we
pull the current advertised settings into the config.
A second scenario is if a user changes the speed/duplex/fc settings when
the interface is down. In this case we must not pull the settings from
the phy and overwrite user settings. We avoid that by checking the
USER_CONFIGURED flag.
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch and the following two patches add support for link flap avoidance
by maintaining the link on power down. This feature is required for
management capable devices to have the management connection
uninterrupted on driver reload, reboot and interface up/down.
The other pros of this feature are
- It speeds up boot up time by several seconds as DHCP addresses can be
acquired faster.
- It avoids lengthy Spanning Tree delay.
On powerup the hardware brings up the phy with default settings. If the
link is not up, the management software configures the phy to gigabit
and starts autonegotiate. Subsequently, as long as the link is up, the
driver and management refrain from resetting and/or changing any
configuration that the link depends on.
The LNK_FLAP_AVOID setting is an NVRAM user configurable bit and is
disabled by default. If this setting is enabled, we skip powering down
the phy and resetting it.
A second NVRAM setting is 1G_ON_VAUX_OK (off by default). This adds
support for gigabit link speed when device is on auxiliary power.
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor for use in the next patch that adds sgmii phy support.
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
