Commit graph

388,156 commits

Author SHA1 Message Date
Johannes Berg
1946bed957 mac80211: check ERP info IE length in parser
It's always just one byte, so check for that and
remove the length field from the parser struct.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08 09:16:57 +02:00
Johannes Berg
1cd8e88e17 mac80211: check DSSS params IE length in parser
It's always just one byte, so check for that and
remove the length field from the parser struct.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08 09:16:56 +02:00
Johannes Berg
a6dfba841c mac80211: remove unused IE pointers from parser
There's no need to parse IEs that aren't used
so just remove them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08 09:16:56 +02:00
Johannes Berg
c5d54fbf0e mac80211: remove ancient reference to master interface
The master interface no longer exists ... and hasn't for
a few years now, so remove this reference :-)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08 09:16:55 +02:00
Ben Greear
a13fbe549f mac80211: be more careful about sending beacon-loss-events
I don't think we should send the events unless it was actually
a beacon that was lost...not just any probe of an AP.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08 09:16:55 +02:00
Ben Greear
78e443e4c6 mac80211: add beacon stats to debugfs
Beacon-timeout and number of beacon loss events.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08 09:16:54 +02:00
Karl Beldan
c6036cfe90 mac80211_hwsim: advertise VHT support also when channels == 1
Drivers can now advertise VHT support even if they don't use channel
contexts.

Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08 09:16:54 +02:00
Karl Beldan
d0e6c21acd mac80211: let drivers not supporting channel contexts use VHT
It is possible since the global hw config and local switched to
cfg80211_chan_def.

Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08 09:16:44 +02:00
Michael Wolf
9fb2640159 powerpc: pSeries_lpar_hpte_remove fails from Adjunct partition being performed before the ANDCOND test
Some versions of pHyp will perform the adjunct partition test before the
ANDCOND test.  The result of this is that H_RESOURCE can be returned and
cause the BUG_ON condition to occur. The HPTE is not removed.  So add a
check for H_RESOURCE, it is ok if this HPTE is not removed as
pSeries_lpar_hpte_remove is looking for an HPTE to remove and not a
specific HPTE to remove.  So it is ok to just move on to the next slot
and try again.

Cc: stable@vger.kernel.org
Signed-off-by: Michael Wolf <mjw@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2013-04-08 15:19:09 +10:00
Guenter Roeck
573728c647 hwmon: (nct6775) Enable both AUXTIN and VIN3 on NCT6776
Per datasheet, VIN3 and AUXTIN share the same external pin. However, there
is no clean way to detect this condition. Furthermore, both are reported
by the BIOS on Supermicro C7H61. It may thus be possible that chip revisions
exist where both attributes are supported at the same time.
Better play safe and report both.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:42 -07:00
Jingoo Han
debe597cca hwmon: (ad7314) use spi_get_drvdata() and spi_set_drvdata()
Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:42 -07:00
Guenter Roeck
4aa3eb4cbe MAINTAINERS: Add myself as maintainer for the NCT6775 driver
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-04-07 21:16:42 -07:00
Guenter Roeck
2c7fd30da2 hwmon: (nct6775) Expand scope of supported chips
NCT6775, NCT6776, and NCT6779 have a number of variants with the same
chip ID but different chip labels. Add text "or compatible" to the
message displayed when the driver is loaded and rephrase the Kconfig
entry to reflect that it also supports compatible chips.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:42 -07:00
Guenter Roeck
c81cc5a4c1 hwmon: (gpio-fan) Use is_visible to determine if attributes should be created
Simplify code and reduce object size by more than 300 bytes (x86_64).

Cc: Jamie Lentin <jm@lentin.co.uk>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Tested-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:42 -07:00
Guenter Roeck
4ce5b1fe31 hwmon: (tmp401) Fix device detection for TMP411B and TMP411C
Turns out that TMP411B and TMP411C have different and unique device IDs.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-04-07 21:16:42 -07:00
Guenter Roeck
e1eb49063b hwmon: Add driver for LM95234
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:42 -07:00
Guenter Roeck
a1fac92b8b hwmon: (tmp401) Add support for TMP431
TMP431 is compatible to TMP401.

Also add support for additional I2C addresses supported by TMP411B
and TMP411C.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-04-07 21:16:42 -07:00
Guenter Roeck
58615a94f6 hwmon: (pmbus/lm25066) Add support for LM25056
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck
e53e6497fc hwmon: (pmbus/lm25066) Refactor device specific coefficients
Initialize device specific coefficients from table instead of hard-coding it
to simplify adding additional chips.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck
2507abb3a7 hwmon: (pmbus/lm25066) Clamp limit attributes
Limits on all supported sensors and chips have to be within 0..0x0fff,
and limits are always positive.

Clamp written values in chip driver. Also clear value cache to ensure
that the actually written value is read back and reported correctly.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck
a7c69118bd hwmon: (pmbus/lm25066) Report VAUX as vmon
So far the driver reported the voltage on VAUX as "vout2". This was not
entirely appropriate as it is not an output voltage, and complicates
the code. Use the new virtual "VMON" register set and report the voltage
as "vmon" instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck
6bf44cedab hwmon: (max6697) Use is_visible and sysfs_create_group
Simplify the code and reduce its size by using is_visible to determine
valid attributes, and sysfs_create_group to create all of them with
a single call.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck
71bb2d211e hwmon: (adt7310) Fix sparse warning
Fix: drivers/hwmon/adt7310.c:51:16: sparse: cast to restricted __be16

Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck
fd9175d2f6 hwmon: (pmbus/ltc2978) Add support for LTC2974 and LTC3883
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck
8c770f3a47 hwmon: (pmbus/ltc2978) Clean up documentation
Some sysfs attributes are only supported on LTC2978 and not on LTC3880.
Update documentation to reflect which attributes are supported for which chips.

Output current attributes supported on LTC3880 were described as providing
input current values. Fix text to reflect that the attributes provide output
current values.

"reset history" attribute descriptions were misleading and seemed to imply
that all history was reset when writing a single attribute. Replace with more
accurate text.

Replace 'internal temperature" with "chip temperature". Temperature limits
not only apply to the chip temperature, but also to external temperatures
on LTC3880, so remove the word "chip" from the attribute description.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck
3d0d283993 hwmon: (pmbus/ltc2978) Code cleanup
Use u16 instead of int to store cached limit attributes.
This reduces allocated data size per driver instance by 48 bytes.
Use defines for the number of pages supported by individual chips.
Use ARRAY_SIZE for loops to initialize array variables, and
initialize all variables in the same code block.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck
bec24b74b2 hwmon: (ltc4261) Fix 'Macros with complex values' checkpatch error
Fix:
ERROR: Macros with complex values should be enclosed in parenthesis

by unwinding the problematic macros.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:40 -07:00
Guenter Roeck
f539038e0b hwmon: (ltc4245) Fix 'Macros with complex values' checkpatch error
Fix:
ERROR: Macros with complex values should be enclosed in parenthesis

by unwinding the problematic macros.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:40 -07:00
Guenter Roeck
b5f0f1eadf hwmon: (ltc4215) Fix 'Macros with complex values' checkpatch error
Fix:
ERROR: Macros with complex values should be enclosed in parenthesis

by unwinding the problematic macros.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:40 -07:00
Guenter Roeck
bc0c591ec1 hwmon: (ltc4151) Fix 'Avoid unnecessary line continuations' checkpatch warning
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:40 -07:00
Guenter Roeck
f0df0fd92d hwmon: (ina2xx) Fix 'Avoid unnecessary line continuations' checkpatch warning
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:40 -07:00
Guenter Roeck
b55f375725 hwmon: Fix checkpatch warning 'quoted string split across lines'
Cc: Corentin Labbe <corentin.labbe@geomatys.fr>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Juerg Haefliger <juergh@gmail.com>
Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Roger Lucas <vt8231@hiddenengine.co.uk>
Cc: Marc Hulsman <m.hulsman@tudelft.nl>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:40 -07:00
Guenter Roeck
088ce2ac9e hwmon: Fix CamelCase checkpatch warnings
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:40 -07:00
Guenter Roeck
236d903948 hwmon: (nct6775) Drop read/write lock
The read/write lock is acquired for each read/write operation from/to the chip.
This occurs either during initialization, when it is not needed, or during
updates, when the update_lock is held as well, and it is not needed either.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:40 -07:00
Guenter Roeck
0fc1f8fc61 hwmon: (nct6775) Only report VID if supported and enabled
VID is not always enabled (NCT6775, NCT6776) or supported (NCT6779).

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck
8e9285b0bb hwmon: (nct6775) Detect and report additional temperature sources
Scan all temperature sources used for fan control and report if additional
monitoring registers are available.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck
bbd8decd41 hwmon: (nct6775) Add support for weighted fan control
The NCT677X series support weighted fan control. In this mode, a secondary
temperature source is used in addition to the primary temperature source to
control fan speed. Add support for this feature.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck
cdcaeceb74 hwmon: (nct6775) Add support for automatic fan control
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck
77eb5b3703 hwmon: (nct6775) Add support for pwm, pwm_mode, and pwm_enable
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck
84d19d92f7 hwmon: (nct6775) Add power management support
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck
47ece9645f hwmon: (nct6775) Add support for fan debounce module parameter
If set, fan debounce is enabled when loading the driver.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck
5c25d954d3 hwmon: (nct6775) Add support for fanX_pulses sysfs attribute
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck
1c65dc365e hwmon: (nct6775) Add support for fan speed attributes
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck
aa136e5dad hwmon: (nct6775) Add support for temperature sensors
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:38 -07:00
Guenter Roeck
a6bd587842 hwmon: (nct6775) Add case open detection
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:38 -07:00
Guenter Roeck
9de2e2e84e hwmon: Driver for Nuvoton NCT6775F, NCT6776F, and NCT6779D
This driver will replace the w83627ehf driver for NCT6775F and NCT6776F,
and provides support for NCT6779D.

This patch provides support for voltage monitor attributes.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:38 -07:00
Guenter Roeck
24f9c539b9 hwmon: Fix 'Macros with complex values' checkpatch errors
Fix:

ERROR: Macros with complex values should be enclosed in parenthesis

when it is seen due to complex code and not due to multi-line variable
declarations.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Alistair John Strachan <alistair@devzero.co.uk>
Acked-by: Alistair John Strachan <alistair@devzero.co.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:38 -07:00
Guenter Roeck
692fe501da hwmon: checkpatch cleanup: Replace printk with pr_debug or dev_dbg as appropriate
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Alistair John Strachan <alistair@devzero.co.uk>
Cc: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Alistair John Strachan <alistair@devzero.co.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:38 -07:00
Naveen Krishna Chatradhi
9e8269de10 hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver
This patch adds DT support to NTC driver to parse the
platform data.

Also adds the support to work as an iio device client.

During the probe ntc driver gets the respective channels of ADC
and uses iio_raw_read calls to get the ADC converted value.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
[Guenter Roeck: fixed Kconfig dependencies; use ERR_CAST]
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:38 -07:00
Lars-Peter Clausen
4b5e536b0e hwmon: (adt7x10) Add alarm interrupt support
This allows an userspace application to poll() on the alarm files to get
notified in case of a temperature threshold event.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:38 -07:00