Commit graph

388,156 commits

Author SHA1 Message Date
Tomi Valkeinen
43417823fd OMAPDSS: DSS: add new clock calculation code
Add new way to iterate over DSS clock divisors. dss_div_calc() provides
a generic way to go over all the divisors, within given clock range.
dss_div_calc() will call a callback function for each divider set,
making the function reusable for all use cases.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-03 15:19:17 +03:00
Tomi Valkeinen
7c284e6ee3 OMAPDSS: DISPC: add new clock calculation code
Add new way to iterate over DISPC clock divisors. dispc_div_calc()
provides a generic way to go over all the divisors, within given pixel
clock range. dispc_div_calc() will call a callback function for each
divider set, making the function reusable for all use cases.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-03 15:19:17 +03:00
Tomi Valkeinen
4ce9e33c0f OMAPDSS: DSI remove unneeded clk source setup code
We always use the same clock sources for DSI, so let's remove the
unnecessary clock source fields from dsi_data.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-03 15:19:17 +03:00
Tomi Valkeinen
478d7df8af OMAPDSS: DSI: add enum omap_dss_dsi_trans_mode
Instead of managing DSI sync ends with booleans, add an enum for the DSI
transfer mode. This is much cleaner way to handle the DSI syncs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-03 15:19:17 +03:00
Tomi Valkeinen
99322577e8 OMAPDSS: DSI: get line buffer size at probe
To find out the DSI line buffer size we need to read HW registers. To
make it possible to do DSI configuration calculations without HW powered
up, store the line buffer size at DSI driver's probe.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-03 15:19:17 +03:00
Tomi Valkeinen
777f05cc79 OMAPDSS: DSI: simplify dsi configuration
We have a bunch of dsi functions that are used to do the basic
configuration for DSI. To simplify things, and to make sure we have all
the necessary information, create a single dsi config function, which
does the basic configuration.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-03 15:19:17 +03:00
Tomi Valkeinen
1751818921 OMAPDSS: DSI: fix wrong unsigned long long use
dsi_configure_dispc_clocks() stores dsi func clock into unsigned long
long, but it should really be just unsigned long. Fix this.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-03 15:19:16 +03:00
Tomi Valkeinen
7b3926b3b9 OMAPDSS: DISPC: store core clk rate
Store dispc core clock rate so that it's available for calculations even
if the HW is disabled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-03 15:19:16 +03:00
Tomi Valkeinen
f8ad984ce0 OMAPDSS: DPI: fix dpi_get_dsidev() for omap5
On OMAP5 the DISPC channels and DSI PLLs are not connected the same way.
LCD2 on OMAP5 cannot use any DSI PLL as a source clock, but LCD3 can use
DSI2's PLL.

This patch fixes dpi_get_dsidev() by adding separate case for OMAP5 to
handle the difference.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:02 +03:00
Tomi Valkeinen
d9f4e46714 OMAPDSS: Taal: remove rotate & mirror support
Taal panel driver has support to set rotation and mirroring. However,
these features cannot be used without causing tearing, and are never
used. The code is just extra bloat, so let's remove it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:01 +03:00
Tomi Valkeinen
2c1a3ea0dc OMAPDSS: DSI: fix DSI channel source initialization
During the initialization of the DSI protocol registers, we always set
the sources of all DSI channels to L4. However, we don't update the
value in the dsi_data, so we may end up with a different value in the
register and in the dsi_data, leading to DSI problems.

This patch fixes the issue by initializing also the channel source in
the dsi_data.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:01 +03:00
Tomi Valkeinen
b7dec9b66f OMAPDSS: DSI: delay dispc initialization
We currently setup both DSI and DISPC related things when the DSI bus is
enabled. There's no need for DISPC related thing at that point, though,
but only later when the video output is enabled.

To make it possible to use the DSI bus before DISPC overlay manager is
selected, this patch moves DSI's DISPC initialization to
dsi_enable_video_output(), from omapdss_dsi_display_enable(). We also
move the selection of DISPC's LCD clock to dsi_enable_video_output.

This way there are no DISPC dependencies until the video output is
enabled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:01 +03:00
Tomi Valkeinen
2eea5ae6c1 OMAPDSS: add output->dispc_channel
The DISPC channel used for each output is currently passed in panel
platform data from the board files.

To simplify this, and to make the panel drivers less dependent on OMAP,
this patch changes omapdss to resolve the channel independently. The
channel is resolved based on the OMAP version and, in case of DSI, the
DSI module id. This resolved channel is stored into a new field in
output, dispc_channel.

The few places where dssdev->channel was used are changed to use
output->recommended_channel. After this patch, dssdev->channel is
obsolete.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:01 +03:00
Tomi Valkeinen
7286a08fb5 OMAPDSS: add output->name
Add name field to omapdss's outputs so that in the following patches
panels refer to the output by their name. The name also helps debugging.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:01 +03:00
Tomi Valkeinen
002d368dee OMAPDSS: HDMI: init output earlier
Move hdmi driver's output initialization a bit earlier, so that it
happens before hdmi panel init. In the future the hdmi panel will depend
on the output being ready.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:01 +03:00
Tomi Valkeinen
27831620a6 OMAPDSS: add missing export for omap_dss_get_output()
omap_dss_get_output() is a public function, but was missing
EXPORT_SYMBOL().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:01 +03:00
Tomi Valkeinen
346f1e0772 OMAPDSS: APPLY: remove dssdev from dss_mgr_wait_for_vsync
dss_mgr_wait_for_vsync() uses dssdev->type to find out if the output is
going to VENC, HDMI, or something else. This creates a dependency on
dssdev, which we want to remove. The task is more logically done by
looking at the output to which the overlay manager in question is
connected to.

This patch changes the code to use output->id to find out which kind of
output we use.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:00 +03:00
Tomi Valkeinen
e087cc21c6 OMAPDSS: Taal: remove multi-panel support
Taal panel driver was originally meant to support multiple different DSI
command mode panel models. This never realized, and the multi-panel
support code is lying there unused, making the driver more difficult to
maintain.

This patch removes the multi-panel support from Taal driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:00 +03:00
Tomi Valkeinen
5761217abf OMAPDSS: DSI: remove omap_dss_device uses
The role of struct omap_dss_device will change in the future. The exact
details of that are still a bit unclear. However, the less uses of
omap_dss_device we have, the easier the change is in the future.

This patch removes uses of omap_dss_device from dsi.c, where it can be
done easily. Mostly this means passing dsi platform device to functions,
instead of the omap_dss_device.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:00 +03:00
Tomi Valkeinen
03a0d1e81b OMAPDSS: DPI: remove omap_dss_device uses
The role of struct omap_dss_device will change in the future. The exact
details of that are still a bit unclear. However, the less uses of
omap_dss_device we have, the easier the change is in the future.

This patch removes uses of omap_dss_device from dpi.c, where it can be
done neatly, by, for example, passing some lower level parameter in
function parameters.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:00 +03:00
Tomi Valkeinen
4fdfdf062d OMAPDSS: HDMI: remove HDMI clk divisors from dssdev
struct omap_dss_device contains HDMI clock divisors. The idea is that the
board file can pass precalculated divisors to the display driver.
However, these divsors are no longer needed, as the omapdss driver can
calculate the divisors during runtime.

This patch removes the divisors from omap_dss_device, and their uses
from the hdmi driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:00 +03:00
Tomi Valkeinen
a0d269ec0b OMAPDSS: DSI: remove DSI & DISPC clk divisors from dssdev
struct omap_dss_device contains DSS clock divisors. The idea is that the
board file can pass precalculated divisors to the display driver.
However, these divsors are no longer needed, as the omapdss driver can
calculate the divisors during runtime.

This patch removes the divisors from omap_dss_device, and their uses
from the dsi driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2013-04-03 15:19:00 +03:00
Tomi Valkeinen
c3f80cbcac OMAPDSS: add fields to panels' platform data
Forthcoming panel patches will change the panel drivers to use platform
data to pass panel's gpios to the panel driver. This patch adds the
required fields and platform data structs to the omap-panel-data.h file,
so that the board files can be changed independently of the panel driver
changes.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
2013-04-03 15:17:46 +03:00
Archit Taneja
a0d8dde9cb OMAPDSS: panels: keep platform data of all panels in a single header
Structs for platform data of omapdss panels are found in headers in the
'include/video/' path. Board files populate these structs with platform
specific values, and the panel driver uses these to configure the panel.

Currently, each panel has it's own header in the above path. Move all the
omapdss panel platform data structs to a single header omap-panel-data.h.
This is useful because:

- All other omapdss panel drivers will be modified to use platform data. This
  would lead to a lot of panel headers usable only by omapdss. A lot of these
  platform data structs are trivial, and don't really need a separate header.
- Platform data would be eventually removed, and platform information would be
  passed via device tree. Therefore, omapdss panel platform data structs are
  temporary, and will be easier to remove if they are all in the same header.
- All board files will have to include the same header to configure a panel's
  platform data, that makes the board files more consistent.

Signed-off-by: Archit Taneja <archit@ti.com>
2013-04-03 15:17:45 +03:00
Frederic Weisbecker
1034fc2f41 nohz: Print final full dynticks CPUs range on boot
Given that we apply a few restrictions on the full dynticks
CPUs range (keep an online timekeeper oustide the range,
then in the future have the range be an RCU nocb CPUs subset),
let's print the final resulting range of full dynticks CPUs to
the user so that he knows what's really going to run.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-03 14:00:48 +02:00
Frederic Weisbecker
3ca277e419 nohz: Pack nohz Kconfig option in a menu of choices
Now the user has the choice between three implementations of
the timer tick:

* Static periodic tick
* Idle dynticks
* Full dynticks

At least for now, these are mutually exclusive choices, so
let's rely on the proper Kconfig feature to display these
to the user.

A new entry CONFIG_NO_HZ_IDLE is created and the old
CONFIG_NO_HZ maps to it for config file backward compatibility.
The old name was too general now that we have more
granular dynticks implementations.

While at it, add some explanation to help the user on
his decision between the 3 entries.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-03 14:00:46 +02:00
Emilio López
950707c0eb pinctrl: sunxi: add clock support
For the port controller to work, we need to enable the apb0_pio gate.
This commit adds the ability to enable one clock specified on the device
tree to the pinctrl driver.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03 13:58:38 +02:00
Frederic Weisbecker
3451d0243c nohz: Rename CONFIG_NO_HZ to CONFIG_NO_HZ_COMMON
We are planning to convert the dynticks Kconfig options layout
into a choice menu. The user must be able to easily pick
any of the following implementations: constant periodic tick,
idle dynticks, full dynticks.

As this implies a mutual exclusion, the two dynticks implementions
need to converge on the selection of a common Kconfig option in order
to ease the sharing of a common infrastructure.

It would thus seem pretty natural to reuse CONFIG_NO_HZ to
that end. It already implements all the idle dynticks code
and the full dynticks depends on all that code for now.
So ideally the choice menu would propose CONFIG_NO_HZ_IDLE and
CONFIG_NO_HZ_EXTENDED then both would select CONFIG_NO_HZ.

On the other hand we want to stay backward compatible: if
CONFIG_NO_HZ is set in an older config file, we want to
enable CONFIG_NO_HZ_IDLE by default.

But we can't afford both at the same time or we run into
a circular dependency:

1) CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED both select
   CONFIG_NO_HZ
2) If CONFIG_NO_HZ is set, we default to CONFIG_NO_HZ_IDLE

We might be able to support that from Kconfig/Kbuild but it
may not be wise to introduce such a confusing behaviour.

So to solve this, create a new CONFIG_NO_HZ_COMMON option
which gathers the common code between idle and full dynticks
(that common code for now is simply the idle dynticks code)
and select it from their referring Kconfig.

Then we'll later create CONFIG_NO_HZ_IDLE and map CONFIG_NO_HZ
to it for backward compatibility.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-03 13:56:03 +02:00
Haojian Zhuang
2afe822968 pinctrl: core: add dependence of GPIOLIB
In file included from drivers/pinctrl/core.c:30:0:
include/asm-generic/gpio.h: In function 'gpio_get_value_cansleep':
include/asm-generic/gpio.h:270:2: error: implicit declaration of
function '__gpio_get_value' [-Werror=implicit-function-declaration]
include/asm-generic/gpio.h: In function 'gpio_set_value_cansleep':
include/asm-generic/gpio.h:276:2: error: implicit declaration of
function '__gpio_set_value' [-Werror=implicit-function-declaration]
drivers/pinctrl/core.c: In function 'pinctrl_ready_for_gpio_range':
drivers/pinctrl/core.c:297:9: error: implicit declaration of function
'gpio_to_chip' [-Werror=implicit-function-declaration]
drivers/pinctrl/core.c:297:27: warning: initialization makes pointer
from integer without a cast [enabled by default]
drivers/pinctrl/core.c:304:45: error: dereferencing pointer to
incomplete type
drivers/pinctrl/core.c:305:26: error: dereferencing pointer to
incomplete type
drivers/pinctrl/core.c:305:39: error: dereferencing pointer to
incomplete type
cc1: some warnings being treated as errors
make[2]: *** [drivers/pinctrl/core.o] Error 1
make[1]: *** [drivers/pinctrl] Error 2
make[1]: *** Waiting for unfinished jobs....

It's caused by CONFIG_GPIOLIB isn't enabled for some platform. So
add the dependence on pinctrl_ready_for_gpio_range().

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03 13:48:33 +02:00
Andrzej Pietrasiewicz
ecfd3f7bb3 usb: gadget: f_obex: add configfs support
f_obex learns about our new configfs-based interface,
which will allow gadgets to be bound to controllers
through userland.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03 14:43:36 +03:00
Andrzej Pietrasiewicz
d1412794b3 usb: gadget: serial: convert to new interface of f_obex
f_obex is now a self-contained module. We need to teach
serial.c about it.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03 14:43:36 +03:00
Andrzej Pietrasiewicz
1d8fc2518c usb: gadget: f_obex: convert to new function interface with backward compatibility
Converting f_obex to the new function interface requires converting
the f_obex's function code and its users.

This patch converts the f_obex.c to the new function interface.
The file is now compiled into a separate usb_f_obex.ko module.

The old function interface is provided by means of preprocessor
conditional directives. After all users are converted, the old interface
can be removed.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03 14:43:35 +03:00
Andrzej Pietrasiewicz
0b6a1e6ff7 usb: gadget: f_serial: add configfs support
this patch implements the new configfs based interface
on f_serial function driver.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03 14:43:35 +03:00
Andrzej Pietrasiewicz
9786b45612 usb: gadget: f_serial: remove compatibility layer
There are no old function interface users left, so the old interface
can be removed.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03 14:43:34 +03:00
Andrzej Pietrasiewicz
70cc3c0246 usb: gadget: serial: convert to new interface of f_serial
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03 14:43:34 +03:00
Andrzej Pietrasiewicz
60540ea2c5 usb: gadget: f_serial: convert to new function interface with backward compatibility
Converting f_serial to the new function interface requires converting
the f_serial's function code and its users.

This patch converts the f_serial.c to the new function interface.

The file is now compiled into a separate usb_f_serial.ko module.
The old function interface is provided by means of preprocessor
conditional directives. After all users are converted, the old interface
can be removed.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03 14:43:33 +03:00
Andrzej Pietrasiewicz
81f886cb7a usb: gadget: nokia: remove unused include
f_serial.c isn't necessary in nokia.c, we can
safely remove it.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03 14:43:33 +03:00
Andrzej Pietrasiewicz
4f47a1be0f usb: gadget: use consistent naming scheme for usb function modules
In order to convert to configfs the USB functions need to be converted
to the new interface from Sebastian, which also requires turning them
into separate modules. Some of these modules will consist of just
one object file, e.g. f_ncm.o. But some of the modules will eventually
consist of more than one object file, e.g. for mass storage there
will be f_mass_storage.o and storage_common.o. The resulting module
cannot be called f_mass_storage.ko due to cyclic dependency. This patch
introduces a naming scheme for the said resulting modules:

usb_f_xxxxxx.ko

e.g. usb_f_mass_storage.ko, usb_f_ss_lb.ko, usb_f_rndis.ko etc.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03 14:43:32 +03:00
Sebastian Andrzej Siewior
88af8bbe4e usb: gadget: the start of the configfs interface
|# modprobe dummy_hcd num=2
|# modprobe libcomposite

|# lsmod
|Module                  Size  Used by
|libcomposite           31648  0
|dummy_hcd              19871  0

|# mkdir /sys/kernel/config/usb_gadget/oha
|# cd /sys/kernel/config/usb_gadget/oha
|# mkdir configs/def.1
|# mkdir configs/def.2
|# mkdir functions/acm.ttyS1
|# mkdir strings/0x1
|mkdir: cannot create directory `strings/0x1': Invalid argument
|# mkdir strings/0x409
|# mkdir strings/1033
|mkdir: cannot create directory `strings/1033': File exists
|# mkdir strings/1032
|# mkdir configs/def.1/strings/0x409
|# mkdir configs/def.2/strings/0x409

|#find . -ls
|   975    0 drwxr-xr-x   5 root     root            0 Dec 23 17:40 .
|   978    0 drwxr-xr-x   4 root     root            0 Dec 23 17:43 ./strings
|  4100    0 drwxr-xr-x   2 root     root            0 Dec 23 17:43 ./strings/1032
|   995    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./strings/1032/serialnumber
|   996    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./strings/1032/product
|   997    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./strings/1032/manufacturer
|  2002    0 drwxr-xr-x   2 root     root            0 Dec 23 17:41 ./strings/0x409
|   998    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./strings/0x409/serialnumber
|   999    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./strings/0x409/product
|  1000    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./strings/0x409/manufacturer
|   977    0 drwxr-xr-x   4 root     root            0 Dec 23 17:41 ./configs
|  4081    0 drwxr-xr-x   3 root     root            0 Dec 23 17:41 ./configs/def.2
|  4082    0 drwxr-xr-x   3 root     root            0 Dec 23 17:42 ./configs/def.2/strings
|  2016    0 drwxr-xr-x   2 root     root            0 Dec 23 17:42 ./configs/def.2/strings/0x409
|  1001    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./configs/def.2/strings/0x409/configuration
|  1002    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./configs/def.2/bmAttributes
|  1003    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./configs/def.2/MaxPower
|   979    0 drwxr-xr-x   3 root     root            0 Dec 23 17:42 ./configs/def.1
|   980    0 drwxr-xr-x   3 root     root            0 Dec 23 17:42 ./configs/def.1/strings
|  5122    0 drwxr-xr-x   2 root     root            0 Dec 23 17:42 ./configs/def.1/strings/0x409
|  1004    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./configs/def.1/strings/0x409/configuration
|  1005    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./configs/def.1/bmAttributes
|  1006    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./configs/def.1/MaxPower
|   976    0 drwxr-xr-x   3 root     root            0 Dec 23 17:41 ./functions
|   981    0 drwxr-xr-x   2 root     root            0 Dec 23 17:41 ./functions/acm.ttyS1
|  1007    0 -r--r--r--   1 root     root         4096 Dec 23 17:43 ./functions/acm.ttyS1/port_num
|  1008    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./UDC
|  1009    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./bcdUSB
|  1010    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./bcdDevice
|  1011    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./idProduct
|  1012    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./idVendor
|  1013    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./bMaxPacketSize0
|  1014    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./bDeviceProtocol
|  1015    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./bDeviceSubClass
|  1016    0 -rw-r--r--   1 root     root         4096 Dec 23 17:43 ./bDeviceClass

|# cat functions/acm.ttyS1/port_num
|0
|# ls -lah /dev/ttyGS*
|crw-rw---T 1 root dialout 252, 0 Dec 23 17:41 /dev/ttyGS0
|
|# echo 0x1234 > idProduct
|# echo 0xabcd > idVendor
|# echo 1122 > strings/0x409/serialnumber
|# echo "The manufacturer" > strings/0x409/manufacturer
|# echo 1 > strings/1032/manufacturer
|# echo 1sa > strings/1032/product
|# echo tada > strings/1032/serialnumber
|echo "Primary configuration" > configs/def.1/strings/0x409/configuration
|# echo "Secondary configuration" > configs/def.2/strings/0x409/configuration
|# ln -s functions/acm.ttyS1 configs/def.1/
|# ln -s functions/acm.ttyS1 configs/def.2/
|find configs/def.1/ -ls
|   979    0 drwxr-xr-x   3 root     root            0 Dec 23 17:49 configs/def.1/
|  6264    0 lrwxrwxrwx   1 root     root            0 Dec 23 17:48 configs/def.1/acm.ttyS1 -> ../../../../usb_gadget/oha/functions/acm.ttyS1
|   980    0 drwxr-xr-x   3 root     root            0 Dec 23 17:42 configs/def.1/strings
|  5122    0 drwxr-xr-x   2 root     root            0 Dec 23 17:49 configs/def.1/strings/0x409
|  6284    0 -rw-r--r--   1 root     root         4096 Dec 23 17:47 configs/def.1/strings/0x409/configuration
|  6285    0 -rw-r--r--   1 root     root         4096 Dec 23 17:49 configs/def.1/bmAttributes
|  6286    0 -rw-r--r--   1 root     root         4096 Dec 23 17:49 configs/def.1/MaxPower
|
|echo 120 > configs/def.1/MaxPower
|
|# ls -lh /sys/class/udc/
|total 0
|lrwxrwxrwx 1 root root 0 Dec 23 17:50 dummy_udc.0 -> ../../devices/platform/dummy_udc.0/udc/dummy_udc.0
|lrwxrwxrwx 1 root root 0 Dec 23 17:50 dummy_udc.1 -> ../../devices/platform/dummy_udc.1/udc/dummy_udc.1
|# echo dummy_udc.0 > UDC
|# lsusb
|Bus 001 Device 002: ID abcd:1234 Unknown
|
|lsusb -d abcd:1234 -v
|Device Descriptor:
…
|  idVendor           0xabcd Unknown
|  idProduct          0x1234
|  bcdDevice            3.06
|  iManufacturer           1 The manufacturer
|  iProduct                2
|  iSerial                 3 1122
|  bNumConfigurations      2
…
|echo "" > UDC

v5…v6
- wired up strings with usb_gstrings_attach()
- add UDC attribe. Write "udc-name" will bind the gadget. Write an empty
  string (it should contain \n since 0 bytes write get optimzed away)
  will unbind the UDC from the gadget. The name of available UDCs can be
  obtained from /sys/class/udc/

v4…v5
- string rework. This will add a strings folder incl. language code like
    strings/409/manufacturer
  as suggested by Alan.
- rebased ontop reworked functions.c which has usb_function_instance
  which is used prior after "mkdir acm.instance" and can be directly
  used for configuration via configfs.

v3…v4
 - moved functions from the root folde down to the gadget as suggested
   by Michał
 - configs have now their own configs folder as suggested by Michał.
   The folder is still name.bConfigurationValue where name becomes the
   sConfiguration. Is this usefull should we just stilc
   configs/bConfigurationValue/ ?
 - added configfs support to the ACM function. The port_num attribute is
   exported by f_acm. An argument has been added to the USB alloc
   function to distinguish between "old" (use facm_configure() to
   configure and configfs interface (expose a config_node).
   The port_num is currently a dumb counter. It will
   require some function re-work to make it work.

scheduled for v5:
- sym linking function into config.

v2…v3
- replaced one ifndef by ifdef as suggested by Micahał
- strstr()/strchr() function_make as suggested by Micahł
- replace [iSerialNumber|iProduct|iManufacturer] with
  [sSerialNumber|sProduct|sManufacturer] as suggested by Alan
- added creation of config descriptors

v1…v2
- moved gadgets from configfs' root directory into /udcs/ within our
  "usb_gadget" folder. Requested by Andrzej & Michał
- use a dot as a delimiter between function's name and its instance's name
  as suggested by Michał
- renamed all config_item_type, configfs_group_operations, make_group,
  drop_item as suggested by suggested by Andrzej to remain consisten
  within this file and within other configfs users
- Since configfs.c and functions.c are now part of the udc-core module,
  the module itself is now called udc. Also added a tiny ifdef around
  init code becuase udc-core is subsys init and this is too early for
  configfs in the built-in case. In the module case, we can only have
  one init function.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03 14:43:32 +03:00
Sebastian Andrzej Siewior
c4ed4ac198 usb: gadget: push tty port allocation from gadget into f_acm
It possible to allocate the tty port number within the "instance"
structure of the function and there is no need to expose this
information within the gadget and therefore it is removed here.
This patch converts only f_acm and all its users. The other gadgets will
follow once the function is converted to the function interface.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03 14:43:31 +03:00
Sebastian Andrzej Siewior
d6a0143985 usb: gadget: move the global the_dev variable to their users
the u_ether.c file has a global variable named the_dev which keeps a
pointer to the network device after it has been created via
gether_setup_name(). It is only used internally by u_ether. This patches
moves the variable to its users and passes it via the port.ioport where
it is saved later anyway.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03 14:43:31 +03:00
Sebastian Andrzej Siewior
15761826ee usb: gadget: nokia: use function framework for ACM
This patch converts the acm_ms gadget to make use of the function
framework to request the ACM function.

The "old" include interface for acm is now removed since nokia was the
last user of it (for ACM).

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-03 14:43:20 +03:00
Tony Luck
e66cd5372d ACPI / BGRT: Don't let users configure BGRT on non X86 systems
Fengguang Wu's 0-Day kernel build testing backend found the
following build error for an allmodconfig build on ia64:

   drivers/built-in.o: In function `show_yoffset':
>> bgrt.c:(.text+0xe5a71): undefined reference to `bgrt_tab'
>> bgrt.c:(.text+0xe5a91): undefined reference to `bgrt_tab'
   drivers/built-in.o: In function `show_xoffset':
>> bgrt.c:(.text+0xe5b51): undefined reference to `bgrt_tab'
>> bgrt.c:(.text+0xe5b71): undefined reference to `bgrt_tab'
   drivers/built-in.o: In function `show_type':
>> bgrt.c:(.text+0xe5c31): undefined reference to `bgrt_tab'
   drivers/built-in.o:bgrt.c:(.text+0xe5c51): more undefined references to `bgrt_tab' follow
   drivers/built-in.o: In function `bgrt_init':
   bgrt.c:(.init.text+0x8931): undefined reference to `bgrt_image'
   bgrt.c:(.init.text+0x8932): undefined reference to `bgrt_image_size'
   bgrt.c:(.init.text+0x8950): undefined reference to `bgrt_image'
   bgrt.c:(.init.text+0x8960): undefined reference to `bgrt_image_size'

The problem is that all these undefined names are provided by
arch/x86/platform/efi/efi-bgrt.c - which is obviously not available
to the ia64 build.

It doesn't seem useful to provide the BGRT support for Itanium
(many systems are headless and have no graphics at all). So
just don't let users configure this driver on non-X86 machines.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-03 13:17:20 +02:00
Thomas Gleixner
0ed2aef9b3 Merge branch 'fortglx/3.10/time' of git://git.linaro.org/people/jstultz/linux into timers/core 2013-04-03 12:27:29 +02:00
Matthias Schiffer
906b1c394d netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths
The bitmask used for the prefix mangling was being calculated
incorrectly, leading to the wrong part of the address being replaced
when the prefix length wasn't a multiple of 32.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-03 12:24:56 +02:00
Daniel Vetter
f47709a950 drm/i915: create pipe_config->dpll for clock state
Clock computations and handling are highly encoder specific, both in
the optimal clock selection and also in which clocks to use and when
sharing of clocks is possible.

So the best place to do this is somewhere in the encoders, with a
generic fallback for those encoders without special needs. To facility
this, add a pipe_config->clocks_set boolean.

This patch here is only prep work, it simply sets the computed clock
values in pipe_config->dpll, and uses that data in the hw clock
setting functions.

Haswell code isn't touched, simply because Haswell clocks work much
different and need their own infrastructure (with probably a
Haswell-specific config->ddi_clock substruct).

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-03 11:37:23 +02:00
Daniel Vetter
88adfff1ad drm/i915: hw readout support for ->has_pch_encoders
Now we can ditch the checks in the Haswell disable code.

v2: add support for Haswell

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-03 11:35:50 +02:00
Daniel Vetter
0e8ffe1bf8 drm/i915: add hw state readout/checking for pipe_config
We need to be able to read out the hw state code for a bunch
of reasons:
- Correctly disabling boot-up/resume state.
- Pure paranoia.

Since not all of the pipe configuration is e.g. relevant for
fastboot (or at least we can allow some wiggle room in some
parameters, like the clocks), we need to add a strict_checking
parameter to intel_pipe_config_compare for fastboot.

For now intel_pipe_config_compare should be fully paranoid and
check everything that the hw state readout code supports. Which
for this infrastructure code is nothing.

I've gone a bit overboard with adding 3 get_pipe_config functions:
The ilk version will differ with the next patch, so it's not too
onerous.

v2: Don't check the hw config if the pipe is off, since an enabled,
but dpms off crtc will obviously have tons of difference with the hw
state.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-03 11:34:55 +02:00
Daniel Vetter
8b47047bd1 drm/i915: rip out superflous is_dp&is_cpu_edp tracking
The only exception left is is_cpu_edp in the haswell modeset code.
We need that to assign the cpu transcoder, but we might want to
move that eventually into the encoder, too.

\o/-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-03 11:31:26 +02:00
Daniel Vetter
947978fa64 drm/i915: remove leaky eDP functions
Jesse Barnes noticed in his review of my DP cleanup series that
intel_edp_target_clock is now unused. Checking related code I've
noticed that also intel_edp_link_config is long unused.

Kill them both.

Wrt leaky eDP functions used in the common crtc code, the only thing
still left is intel_encoder_is_pch_edp. That one is just due to the
massive confusion between eDP vs. DP and port A vs. port D. Crtc code
should at most concern itself with the later, never with the former.

But that's material for another patch series.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-03 11:30:33 +02:00