Commit graph

388,156 commits

Author SHA1 Message Date
Antti Palosaari
431a6d4ab9 [media] af9035: use already detected eeprom base addr
eeprom memory mapped base address is detected at the very first.
Use it everywhere.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 19:01:00 -03:00
Antti Palosaari
8229da5064 [media] af9035: select firmware loader according to firmware
AF9035 and IT9135 supports two different firmware format. Select
correct loader according to first byte of firmware file.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 19:00:38 -03:00
Alan Stern
417c765af9 USB: EHCI: fix up incorrect merge resolution
This patch (as1671) fixes up an incorrect resolution of a merge
conflict between Greg KH's usb-linus branch and his usb-next branch.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-21 15:00:18 -07:00
Antti Palosaari
9d7b848e43 [media] it913x: remove demod init reg tables
These are demod inits and are already done by af9033 demod driver.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 19:00:17 -03:00
Michal Marek
0f40d9d3c5 Merge branch 'yem-kconfig-rc-fixes' of git://gitorious.org/linux-kconfig/linux-kconfig into kbuild/kconfig 2013-03-21 23:00:03 +01:00
Antti Palosaari
463c399c2a [media] af9033: add IT9135 demod reg init tables
Dumped out from Windows driver version 12.07.06.1, 07/06/2012.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 19:00:01 -03:00
Antti Palosaari
cfd08f0fb9 [media] it913x: use dev_foo() logging
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:59:33 -03:00
Antti Palosaari
c0d300a669 [media] it913x: include tuner IDs from af9033.h
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:59:17 -03:00
Antti Palosaari
1085979792 [media] it913x: remove unused variables
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:59:02 -03:00
Antti Palosaari
44af747f4e [media] it913x: get rid of it913x config struct
We don't need it. Tuner ID and device address are enough.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:58:46 -03:00
Antti Palosaari
d19812eb5f [media] it913x: tuner power up routines
Copy forgotten power up registers from it913x-fe driver.
Remove two demod registers as those are already written
by af9033 driver.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:58:17 -03:00
Antti Palosaari
42432b3ce8 [media] it913x: rename functions and variables
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:57:54 -03:00
Antti Palosaari
8c1285a280 [media] it913x: merge it913x_fe_suspend() to it913x_fe_sleep()
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:57:32 -03:00
Antti Palosaari
ebb0662cee [media] it913x: merge it913x_fe_start() to it913x_init_tuner()
Merge those functions to one and disable sleep.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:57:17 -03:00
Antti Palosaari
df8f1be14f [media] af9035: IT9135 dual tuner related changes
Now it supports IT9135 based dual tuner devices.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:56:42 -03:00
Antti Palosaari
fe8eece1fd [media] af9033: IT9135 v2 supported related changes
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:55:45 -03:00
Antti Palosaari
bc3c9e10fc [media] af9035: basic support for IT9135 v2 chips
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:55:13 -03:00
Antti Palosaari
9ea3681db4 [media] af9035: merge af9035 and it9135 eeprom read routines
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:51:31 -03:00
Antti Palosaari
bada342e08 [media] af9035: USB1.1 support (== PID filters)
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:50:53 -03:00
Antti Palosaari
a7816b7667 [media] af9035: constify clock tables
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:49:41 -03:00
Antti Palosaari
b799b8102b [media] af9035: [0ccd:0099] TerraTec Cinergy T Stick Dual RC (rev. 2)
That same USB ID is used both AF9015 and AF9035 driver.
iManufacturer is only thing we can select correct driver without a I/O.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:49:20 -03:00
Antti Palosaari
e8c7aab50d [media] af9015: reject device TerraTec Cinergy T Stick Dual RC (rev. 2)
That same USB ID is used both AF9015 and AF9035 driver.
iManufacturer is only thing we can select correct driver without a I/O.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:49:02 -03:00
Antti Palosaari
0d94d6a04b [media] af9035: fix af9033 demod sampling frequency
ADC needs to be also multiplied to 2 as it9135.
Fixes bug I introduced few commits ago.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:48:16 -03:00
Antti Palosaari
74c1883a56 [media] af9035: add auto configuration heuristic for it9135
Detect automatically multiple chip versions and select configuration
according to that.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:47:55 -03:00
Antti Palosaari
ac77fb0f0c [media] af9035: add support for 1st gen it9135
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:47:19 -03:00
Antti Palosaari
4902bb39b6 [media] af9033: support for it913x tuners
Add support for tuners integrated to the IT9135 and IT9137.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:46:47 -03:00
Rafael J. Wysocki
2e0f8822d1 ACPI / LPSS: Add support for exposing LTR registers to user space
Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have
registers providing access to LTR (Latency Tolerance Reporting)
functionality that allows software to monitor and possibly influence
the aggressiveness of the platform's active-state power management.

For each LPSS device, there are two modes of operation related to LTR,
the auto mode and the software mode.  In the auto mode the LTR is
set up by the platform firmware and managed by hardware.  Software
can only read the LTR register values to monitor the platform's
behavior.  In the software mode it is possible to use LTR to control
the extent to which the platform will use its built-in power
management features.

This changeset adds support for reading the LPSS devices' LTR
registers and exposing their values to user space for monitoring and
diagnostics purposes.  It re-uses the MMIO mappings created to access
the LPSS devices' clock registers for reading the values of the LTR
registers and exposes them to user space through sysfs device
attributes.  Namely, a new atrribute group, lpss_ltr, is created for
each LPSS device.  It contains three new attributes: ltr_mode,
auto_ltr, sw_ltr.  The value of the ltr_mode attribute reflects the
LTR mode being used at the moment (software vs auto) and the other
two contain the actual register values (raw) whose meaning depends
on the LTR mode.  All of these attributes are read-only.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-21 22:45:15 +01:00
Rafael J. Wysocki
f58b082aed ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices
Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some
common features that aren't shared with any other platform devices,
including the clock and LTR (Latency Tolerance Reporting) registers.
It is better to handle those features in common code than to bother
device drivers with doing that (I/O functionality-wise the LPSS
devices are generally compatible with other devices that don't
have those special registers and may be handled by the same drivers).

The clock registers of the LPSS devices are now taken care of by
the special clk-x86-lpss driver, but the MMIO mappings used for
accessing those registers can also be used for accessing the LTR
registers on those devices (LTR support for the Lynxpoint LPSS is
going to be added by a subsequent patch).  Thus it is convenient
to add a special ACPI scan handler for the Lynxpoint LPSS devices
that will create the MMIO mappings for accessing the clock (and
LTR in the future) registers and will register the LPSS devices'
clocks, so the clk-x86-lpss driver will only need to take care of
the main Lynxpoint LPSS clock.

Introduce a special ACPI scan handler for Intel Lynxpoint LPSS
devices as described above.  This also reduces overhead related to
browsing the ACPI namespace in search of the LPSS devices before the
registration of their clocks, removes some LPSS-specific (and
somewhat ugly) code from acpi_platform.c and shrinks the overall code
size slightly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-21 22:44:38 +01:00
Antti Palosaari
88b38befc0 [media] ITE IT913X silicon tuner driver
It is tuner driver for tuner integrated to the ITE IT9135 and
IT9137 chips. I split it out from the current it913x-fe driver.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:42:19 -03:00
Kevin Baradon
e9e7a16d6d [media] media/rc/imon.c: avoid flooding syslog with "unknown keypress" when keypad is pressed
My 15c2:0036 device floods syslog when a keypad key is pressed:

	Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2
	Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fef2
	Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2
	Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2
	Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2

This patch removes those messages from imon, following suggestion from
Mauro. Unknown keys shall be correctly handled by rc/input layer.

Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:37:32 -03:00
Vipul Kumar Samar
0498172417 clk:SPEAr1340: Correct parent clock configuration
This patch corrects wrongly configured parent clock for following
devices:

   * Video enc/decoder
   * Video ip
   * Pin control
   * ACP
   * camx

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Reviewed-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-21 14:36:55 -07:00
Eduardo Valentin
a368a6a33b documentation: clk: fix couple of misspelling
Correcting misspelling inside the clk.txt.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-03-21 14:35:45 -07:00
Kevin Baradon
26ccbec44a [media] media/rc/imon.c: make send_packet() delay larger for 15c2:0036
Some imon devices (like 15c2:0036) need a higher delay between
send_packet calls.

Default value is still 5ms to avoid regressions on already working
hardware.

Also use interruptible wait to avoid load average going too high (and
let caller handle signals).

Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:34:25 -03:00
Federico Fuga
15170025ee [media] Corrected Oops on omap_vout when no manager is connected
If no manager is connected to the vout device, the omapvid_init() function
fails. No error condition is checked, and the device is started. Later on,
when irq is serviced, a NULL pointer dereference occurs.
Also, the isr routine must be registered only if no error occurs, otherwise
the isr triggers without the proper setup, and the kernel oops again.
To prevent this, the error condition is checked, and the streamon function
exits with error. Also the isr registration call is moved after the setup
procedure is completed.

Reviewed-by: Prabhakar Lad <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:31:51 -03:00
Daniel Borkmann
79617801ea filter: bpf_jit_comp: refactor and unify BPF JIT image dump output
If bpf_jit_enable > 1, then we dump the emitted JIT compiled image
after creation. Currently, only SPARC and PowerPC has similar output
as in the reference implementation on x86_64. Make a small helper
function in order to reduce duplicated code and make the dump output
uniform across architectures x86_64, SPARC, PPC, ARM (e.g. on ARM
flen, pass and proglen are currently not shown, but would be
interesting to know as well), also for future BPF JIT implementations
on other archs.

Cc: Mircea Gherzan <mgherzan@gmail.com>
Cc: Matt Evans <matt@ozlabs.org>
Cc: Eric Dumazet <eric.dumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21 17:25:56 -04:00
Andrzej Hajda
6ba4d05e84 [media] m5mols: Fix bug in stream on handler
Due to improper condition check streaming start for some pixel
formats was prevent and the s_stream just reatuned -EINVAL.
This fixes regression introduced in commit 5565a2ad47
[media] m5mols: Protect driver data with a mutex.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:25:09 -03:00
Sylwester Nawrocki
8c6ecdd7ce [media] s5p-fimc: Do not attempt to disable not enabled media pipeline
This fixes following warnings when all links are being disconnected:
[   20.080000] WARNING: at drivers/media/platform/s5p-fimc/fimc-mdevice.c:1269 __fimc_md_set_camclk+0x208/0x20c()
[   20.090000] Modules linked in:
[   20.095000] [<c001603c>] (unwind_backtrace+0x0/0x13c) from [<c00246dc>] (warn_slowpath_common+0x54/0x64)
[   20.105000] [<c00246dc>] (warn_slowpath_common+0x54/0x64) from [<c0024708>] (warn_slowpath_null+0x1c/0x24)
[   20.115000] [<c0024708>] (warn_slowpath_null+0x1c/0x24) from [<c0323fe8>] (__fimc_md_set_camclk+0x208/0x20c)
[   20.125000] [<c0323fe8>] (__fimc_md_set_camclk+0x208/0x20c) from [<c0324368>] (__fimc_pipeline_close+0x38/0x48)
[   20.135000] [<c0324368>] (__fimc_pipeline_close+0x38/0x48) from [<c0325848>] (fimc_md_link_notify+0x10c/0x198)
[   20.145000] [<c0325848>] (fimc_md_link_notify+0x10c/0x198) from [<c02f9dd4>] (__media_entity_setup_link+0x1c0/0x1e8)
[   20.155000] [<c02f9dd4>] (__media_entity_setup_link+0x1c0/0x1e8) from [<c02f9710>] (media_device_ioctl+0x2c0/0x41c)
[   20.165000] [<c02f9710>] (media_device_ioctl+0x2c0/0x41c) from [<c02f9938>] (media_ioctl+0x30/0x34)
[   20.175000] [<c02f9938>] (media_ioctl+0x30/0x34) from [<c00cf0bc>] (do_vfs_ioctl+0x84/0x5e8)
[   20.185000] [<c00cf0bc>] (do_vfs_ioctl+0x84/0x5e8) from [<c00cf65c>] (sys_ioctl+0x3c/0x60)
[   20.190000] [<c00cf65c>] (sys_ioctl+0x3c/0x60) from [<c000f040>] (ret_fast_syscall+0x0/0x30)

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:24:57 -03:00
Arun Kumar K
053e09f319 [media] s5p-mfc: Fix encoder control 15 issue
mfc-encoder is not working in the latest kernel giving the
erorr "Adding control (15) failed". Adding the missing step
parameter in this control to fix the issue.

Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:24:38 -03:00
Arun Kumar K
90c0ae5009 [media] s5p-mfc: Fix frame skip bug
The issue was seen in VP8 decoding where the last frame was
skipped by the driver. This patch gets the correct frame_type value
to fix this bug.

Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Arun Mankuzhi <arun.m@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:24:07 -03:00
Shaik Ameer Basha
e34a89b397 [media] s5p-fimc: send valid m2m ctx to fimc_m2m_job_finish
fimc_m2m_job_finish() has to be called with the m2m context for the necessary
cleanup while resume. But currently fimc_m2m_job_finish() always passes m2m
context as NULL.
This patch preserves the context before making it null, for necessary cleanup.

Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:23:21 -03:00
Shaik Ameer Basha
5d83790be7 [media] exynos-gsc: send valid m2m ctx to gsc_m2m_job_finish
gsc_m2m_job_finish() has to be called with the m2m context for the necessary
cleanup while resume. But currently gsc_m2m_job_finish() always passes m2m
context as NULL.
This patch preserves the context before making it null, for necessary cleanup.
Use gsc_m2m_opened() instead gsc_m2m_active() in gsc_resume().

Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:23:06 -03:00
Shaik Ameer Basha
6a5360966a [media] fimc-lite: Fix the variable type to avoid possible crash
Changing the variable type to 'int' from 'unsigned int'. Driver
logic expects the variable type to be 'int'.

Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:22:43 -03:00
Shaik Ameer Basha
4cec1893d8 [media] fimc-lite: Initialize 'step' field in fimc_lite_ctrl structure
v4l2_ctrl_new() uses check_range() for control range checking.
This function expects 'step' value for V4L2_CTRL_TYPE_BOOLEAN type control.
If 'step' value doesn't match to '1', it returns -ERANGE error.
This patch adds the default .step value to 1.

Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 18:22:08 -03:00
Sergei Shtylyov
d5e07e6921 sh_eth: use managed device API
Switch the driver to the managed device API by replacing ioremap() calls with
devm_ioremap_resource() (that will also result in calling request_mem_region()
which the driver forgot to do until now) and k[mz]alloc() with devm_kzalloc() --
this permits to simplify driver's probe()/remove() method cleanup. We can now
remove the ioremap() error messages since the error messages are printed by
 devm_ioremap_resource() itself. We can also remove the 'bitbang' field from
'struct sh_eth_private' as we don't need it anymore in order to free the memory
behind it...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21 17:20:55 -04:00
Sergei Shtylyov
564044b092 sh_eth: kill unneeded typecast in sh_eth_drv_probe()
sh_eth_drv_probe() does cast from 'void *' when assigning to the 'pd'  variable
which is automatic anyway. Turn the assignment into initializer, while removing
the cast...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21 17:20:54 -04:00
Sergei Shtylyov
dfed5e7fb4 sh_eth: use PIR_* bits
sh_mdio_init() uses the bare numbers instead of the PHY interface bits, despite
these are declared in sh_eth.h as 'enum PIR_BIT'...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21 17:20:54 -04:00
Mark Brown
d3725761ee ASoC: wm8994: Restore AIFnCLK after reducing it for low clock rates
This helps to ensure a smooth startup when we restore.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-21 21:37:09 +01:00
Dmitri Belimov
01ae72866d [media] xc5000: fix incorrect debug printnk
I found very small bug in xc5000 source. When set option debug=1 and
listen a radio we see in dmesg xc5000: xc_SetTVStandard()
Standard = M/N-NTSC/PAL-BTSC at all times. However, it should be, instead
"FM Radio-INPUT1_MONO".

That happens because xc5000_set_radio_freq() gets the correct value for
VideoMode and AudioMode for radio and calls xc_SetTVStandard() where name
of standard comes from the incorrect place priv->video_standard.

This incorrect debug message makes debugging  a little difficult.

Signed-off-by: Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 16:46:05 -03:00
Simon Marchi
6e4a2f7f94 tile: Add definition of NR_syscalls
It is required by the syscall tracepoint mechanism.

Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-03-21 15:39:35 -04:00
Simon Marchi
e2ed522aaa tile: move declaration of sys_call_table to <asm/syscall.h>
When activating syscall tracing, kernel/trace/trace_syscalls.c doesn't
find sys_call_table because it includes <asm/syscall.h>, not
<asm/syscalls.h>. Also, looking at the other architectures, that is
probably where it should be.

Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-03-21 15:39:35 -04:00