Commit graph

388,156 commits

Author SHA1 Message Date
Trond Myklebust
240286725d NFSv4.1: Add a helper pnfs_commit_and_return_layout
In order to be able to safely return the layout in nfs4_proc_setattr,
we need to block new uses of the layout, wait for all outstanding
users of the layout to complete, commit the layout and then return it.

This patch adds a helper in order to do all this safely.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
2013-03-21 10:31:21 -04:00
Trond Myklebust
2495680434 NFSv4.1: Always clear the NFS_INO_LAYOUTCOMMIT in layoutreturn
Note that clearing NFS_INO_LAYOUTCOMMIT is tricky, since it requires
you to also clear the NFS_LSEG_LAYOUTCOMMIT bits from the layout
segments.
The only two sites that need to do this are the ones that call
pnfs_return_layout() without first doing a layout commit.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@vger.kernel.org
2013-03-21 10:31:21 -04:00
Trond Myklebust
a073dbff35 NFSv4.1: Fix a race in pNFS layoutcommit
We need to clear the NFS_LSEG_LAYOUTCOMMIT bits atomically with the
NFS_INO_LAYOUTCOMMIT bit, otherwise we may end up with situations
where the two are out of sync.
The first half of the problem is to ensure that pnfs_layoutcommit_inode
clears the NFS_LSEG_LAYOUTCOMMIT bit through pnfs_list_write_lseg.
We still need to keep the reference to those segments until the RPC call
is finished, so in order to make it clear _where_ those references come
from, we add a helper pnfs_list_write_lseg_done() that cleans up after
pnfs_list_write_lseg.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@vger.kernel.org
2013-03-21 10:31:19 -04:00
Marcelo Tosatti
2ae33b3896 Merge remote-tracking branch 'upstream/master' into queue
Merge reason:

From: Alexander Graf <agraf@suse.de>

"Just recently this really important patch got pulled into Linus' tree for 3.9:

commit 1674400aae
Author: Anton Blanchard <anton <at> samba.org>
Date:   Tue Mar 12 01:51:51 2013 +0000

Without that commit, I can not boot my G5, thus I can't run automated tests on it against my queue.

Could you please merge kvm/next against linus/master, so that I can base my trees against that?"

* upstream/master: (653 commits)
  PCI: Use ROM images from firmware only if no other ROM source available
  sparc: remove unused "config BITS"
  sparc: delete "if !ULTRA_HAS_POPULATION_COUNT"
  KVM: Fix bounds checking in ioapic indirect register reads (CVE-2013-1798)
  KVM: x86: Convert MSR_KVM_SYSTEM_TIME to use gfn_to_hva_cache functions (CVE-2013-1797)
  KVM: x86: fix for buffer overflow in handling of MSR_KVM_SYSTEM_TIME (CVE-2013-1796)
  arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS
  arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED
  inet: limit length of fragment queue hash table bucket lists
  qeth: Fix scatter-gather regression
  qeth: Fix invalid router settings handling
  qeth: delay feature trace
  sgy-cts1000: Remove __dev* attributes
  KVM: x86: fix deadlock in clock-in-progress request handling
  KVM: allow host header to be included even for !CONFIG_KVM
  hwmon: (lm75) Fix tcn75 prefix
  hwmon: (lm75.h) Update header inclusion
  MAINTAINERS: Remove Mark M. Hoffman
  xfs: ensure we capture IO errors correctly
  xfs: fix xfs_iomap_eof_prealloc_initial_size type
  ...

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-03-21 11:11:52 -03:00
fanchaoting
4376c94618 pnfs-block: removing DM device maybe cause oops when call dev_remove
when pnfs block using device mapper,if umounting later,it maybe
cause oops. we apply "1 + sizeof(bl_umount_request)" memory for
msg->data, the memory maybe overflow when we do "memcpy(&dataptr
[sizeof(bl_msg)], &bl_umount_request, sizeof(bl_umount_request))",
because the size of bl_msg is more than 1 byte.

Signed-off-by: fanchaoting<fanchaoting@cn.fujitsu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-03-21 10:11:06 -04:00
Mauro Carvalho Chehab
808d24d6c0 [media] dvb-core: don't clear stats at DTV_CLEAR
The stats are cleared by the frontend. Don't do it at DTV_CLEAR.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 10:27:35 -03:00
Mauro Carvalho Chehab
340e76965c [media] drxk: Fix bogus signal strength indicator
The DVBv3 signal strength indicator is bogus: it doesn't range
from 0 to 65535 as it would be expected. Also, 0 means the max
signal strength.
Now that a better way to estimate it was added, use the new
way.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 10:27:21 -03:00
Mauro Carvalho Chehab
59a7a23c47 [media] drxk: use a better calculus for RF strength
The AZ6007 driver released by Terratec has a better way to
estimate the signal strength, at CtrlSigStrength(). Port it
to the driver.
It should be noticed that there are two parameters there that
are tuner-specific.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 10:27:05 -03:00
Mauro Carvalho Chehab
8f3741e028 [media] drxk: Add pre/post BER and PER/UCB stats
The original az6007 driver has the code to calculate such
stats. Add it to the driver, reporting them via DVBv5
stats API.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 10:26:50 -03:00
Mauro Carvalho Chehab
2b0e1f3afd [media] drxk: remove dummy BER read code
The BER code does nothing but filling it with zero. Remove it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 10:25:59 -03:00
Mauro Carvalho Chehab
2bf0f93e0d [media] siano: make some functions static
drivers/media/common/siano/smsdvb-debugfs.c:51:6: warning: no previous prototype for 'smsdvb_print_dvb_stats' [-Wmissing-prototypes]
drivers/media/common/siano/smsdvb-debugfs.c:154:6: warning: no previous prototype for 'smsdvb_print_isdb_stats' [-Wmissing-prototypes]
drivers/media/common/siano/smsdvb-debugfs.c:244:6: warning: no previous prototype for 'smsdvb_print_isdb_stats_ex' [-Wmissing-prototypes]
drivers/media/common/siano/smscoreapi.c:832:5: warning: no previous prototype for 'smscore_configure_board' [-Wmissing-prototypes]
drivers/media/common/siano/smscoreapi.c:1301:5: warning: no previous prototype for 'smscore_init_device' [-Wmissing-prototypes]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 10:04:01 -03:00
Simon Horman
ac22dde76c Revert "ARM: shmobile: streamline mackerel SD and MMC devices"
This reverts commit 626a645eb7.

This appears to be incompatible with
"ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs"

Reverting this change resolves the following build failure:

arch/arm/mach-shmobile/board-mackerel.c: In function ‘mackerel_init’:
arch/arm/mach-shmobile/board-mackerel.c:1468: error: ‘GPIO_FN_SDHICMD1’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1468: error: (Each undeclared identifier is reported only once
arch/arm/mach-shmobile/board-mackerel.c:1468: error: for each function it appears in.)
arch/arm/mach-shmobile/board-mackerel.c:1469: error: ‘GPIO_FN_SDHICLK1’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1470: error: ‘GPIO_FN_SDHID1_3’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1471: error: ‘GPIO_FN_SDHID1_2’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1472: error: ‘GPIO_FN_SDHID1_1’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1473: error: ‘GPIO_FN_SDHID1_0’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1489: error: ‘GPIO_FN_SDHICMD2’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1490: error: ‘GPIO_FN_SDHICLK2’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1491: error: ‘GPIO_FN_SDHID2_3’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1492: error: ‘GPIO_FN_SDHID2_2’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1493: error: ‘GPIO_FN_SDHID2_1’ undeclared (first use in this function)
arch/arm/mach-shmobile/board-mackerel.c:1494: error: ‘GPIO_FN_SDHID2_0’ undeclared (first use in this function)

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 22:03:58 +09:00
Mauro Carvalho Chehab
05ad412a63 [media] siano: Fix the remaining checkpatch.pl compliants
Fix all other remaining checkpatch.pl compliants on the Siano driver,
except for the 80-cols (soft) limit. Those are harder to fix, and
probably not worth to do right now.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 10:03:53 -03:00
Guennadi Liakhovetski
a463f73176 ARM: shmobile: kzm9g-reference: fix device-tree bindings and device names
Fix several device-tree bindings, that haven't been updated for newest
versions of respective drivers, and device names and pin numbers, left over
from non-DT and old pinctrl versions.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 22:03:50 +09:00
Mauro Carvalho Chehab
28a59df4d7 [media] siano: remove the remaining CamelCase compliants
Remove the remaining CamelCase checkpatch.pl compliants.
There are still a few left, but those are due to USB and
DVB APIs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 10:03:45 -03:00
Mauro Carvalho Chehab
90414248bf [media] siano: fix checkpatch.pl compliants on smscoreapi.h
Fix the remaining checkpatch.pl compliants at smscoreapi.h,
except by the "line over 80 characters" on comments. Fixing those
would require more time, as the better is to convert them into the
struct descriptions used inside the kernel, as described at:
	Documentation/kernel-doc-nano-HOWTO.txt

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 10:03:34 -03:00
Mauro Carvalho Chehab
cf0e9cfcc7 [media] siano: convert structure names to lowercase
There are several structures defined in uppercase. Convert them
to lowercase, and simplify their names, when possible.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 10:03:27 -03:00
Mauro Carvalho Chehab
dfef84fc13 [media] siano: get rid of CammelCase from smscoreapi.h
It is almost impossible to see a compliant with checkpatch.pl
on those Siano drivers, as there are simply too much violations
on it. So, now that a big change was done, the better is to
cleanup the checkpatch compliants.

Let's first replace all CammelCase symbols found at smscoreapi.h
using camel_case namespace. That removed 144 checkpatch.pl
compliants on this file. Of course, the other files need to be
fixed accordingly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 10:03:16 -03:00
Matt Fleming
e971318bbe efivars: Handle duplicate names from get_next_variable()
Some firmware exhibits a bug where the same VariableName and
VendorGuid values are returned on multiple invocations of
GetNextVariableName(). See,

    https://bugzilla.kernel.org/show_bug.cgi?id=47631

As a consequence of such a bug, Andre reports hitting the following
WARN_ON() in the sysfs code after updating the BIOS on his, "Gigabyte
Technology Co., Ltd. To be filled by O.E.M./Z77X-UD3H, BIOS F19e
11/21/2012)" machine,

[    0.581554] EFI Variables Facility v0.08 2004-May-17
[    0.584914] ------------[ cut here ]------------
[    0.585639] WARNING: at /home/andre/linux/fs/sysfs/dir.c:536 sysfs_add_one+0xd4/0x100()
[    0.586381] Hardware name: To be filled by O.E.M.
[    0.587123] sysfs: cannot create duplicate filename '/firmware/efi/vars/SbAslBufferPtrVar-01f33c25-764d-43ea-aeea-6b5a41f3f3e8'
[    0.588694] Modules linked in:
[    0.589484] Pid: 1, comm: swapper/0 Not tainted 3.8.0+ #7
[    0.590280] Call Trace:
[    0.591066]  [<ffffffff81208954>] ? sysfs_add_one+0xd4/0x100
[    0.591861]  [<ffffffff810587bf>] warn_slowpath_common+0x7f/0xc0
[    0.592650]  [<ffffffff810588bc>] warn_slowpath_fmt+0x4c/0x50
[    0.593429]  [<ffffffff8134dd85>] ? strlcat+0x65/0x80
[    0.594203]  [<ffffffff81208954>] sysfs_add_one+0xd4/0x100
[    0.594979]  [<ffffffff81208b78>] create_dir+0x78/0xd0
[    0.595753]  [<ffffffff81208ec6>] sysfs_create_dir+0x86/0xe0
[    0.596532]  [<ffffffff81347e4c>] kobject_add_internal+0x9c/0x220
[    0.597310]  [<ffffffff81348307>] kobject_init_and_add+0x67/0x90
[    0.598083]  [<ffffffff81584a71>] ? efivar_create_sysfs_entry+0x61/0x1c0
[    0.598859]  [<ffffffff81584b2b>] efivar_create_sysfs_entry+0x11b/0x1c0
[    0.599631]  [<ffffffff8158517e>] register_efivars+0xde/0x420
[    0.600395]  [<ffffffff81d430a7>] ? edd_init+0x2f5/0x2f5
[    0.601150]  [<ffffffff81d4315f>] efivars_init+0xb8/0x104
[    0.601903]  [<ffffffff8100215a>] do_one_initcall+0x12a/0x180
[    0.602659]  [<ffffffff81d05d80>] kernel_init_freeable+0x13e/0x1c6
[    0.603418]  [<ffffffff81d05586>] ? loglevel+0x31/0x31
[    0.604183]  [<ffffffff816a6530>] ? rest_init+0x80/0x80
[    0.604936]  [<ffffffff816a653e>] kernel_init+0xe/0xf0
[    0.605681]  [<ffffffff816ce7ec>] ret_from_fork+0x7c/0xb0
[    0.606414]  [<ffffffff816a6530>] ? rest_init+0x80/0x80
[    0.607143] ---[ end trace 1609741ab737eb29 ]---

There's not much we can do to work around and keep traversing the
variable list once we hit this firmware bug. Our only solution is to
terminate the loop because, as Lingzhu reports, some machines get
stuck when they encounter duplicate names,

  > I had an IBM System x3100 M4 and x3850 X5 on which kernel would
  > get stuck in infinite loop creating duplicate sysfs files because,
  > for some reason, there are several duplicate boot entries in nvram
  > getting GetNextVariableName into a circle of iteration (with
  > period > 2).

Also disable the workqueue, as efivar_update_sysfs_entries() uses
GetNextVariableName() to figure out which variables have been created
since the last iteration. That algorithm isn't going to work if
GetNextVariableName() returns duplicates. Note that we don't disable
EFI variable creation completely on the affected machines, it's just
that any pstore dump-* files won't appear in sysfs until the next
boot.

Reported-by: Andre Heider <a.heider@gmail.com>
Reported-by: Lingzhu Xiang <lxiang@redhat.com>
Tested-by: Lingzhu Xiang <lxiang@redhat.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-21 12:43:46 +00:00
Matt Fleming
ec50bd32f1 efivars: explicitly calculate length of VariableName
It's not wise to assume VariableNameSize represents the length of
VariableName, as not all firmware updates VariableNameSize in the same
way (some don't update it at all if EFI_SUCCESS is returned). There
are even implementations out there that update VariableNameSize with
values that are both larger than the string returned in VariableName
and smaller than the buffer passed to GetNextVariableName(), which
resulted in the following bug report from Michael Schroeder,

  > On HP z220 system (firmware version 1.54), some EFI variables are
  > incorrectly named :
  >
  > ls -d /sys/firmware/efi/vars/*8be4d* | grep -v -- -8be returns
  > /sys/firmware/efi/vars/dbxDefault-pport8be4df61-93ca-11d2-aa0d-00e098032b8c
  > /sys/firmware/efi/vars/KEKDefault-pport8be4df61-93ca-11d2-aa0d-00e098032b8c
  > /sys/firmware/efi/vars/SecureBoot-pport8be4df61-93ca-11d2-aa0d-00e098032b8c
  > /sys/firmware/efi/vars/SetupMode-Information8be4df61-93ca-11d2-aa0d-00e098032b8c

The issue here is that because we blindly use VariableNameSize without
verifying its value, we can potentially read garbage values from the
buffer containing VariableName if VariableNameSize is larger than the
length of VariableName.

Since VariableName is a string, we can calculate its size by searching
for the terminating NULL character.

Reported-by: Frederic Crozat <fcrozat@suse.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Michael Schroeder <mls@suse.com>
Cc: Lee, Chun-Yi <jlee@suse.com>
Cc: Lingzhu Xiang <lxiang@redhat.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-21 12:43:46 +00:00
Seth Forshee
ec0971ba53 efivars: Add module parameter to disable use as a pstore backend
We know that with some firmware implementations writing too much data to
UEFI variables can lead to bricking machines. Recent changes attempt to
address this issue, but for some it may still be prudent to avoid
writing large amounts of data until the solution has been proven on a
wide variety of hardware.

Crash dumps or other data from pstore can potentially be a large data
source. Add a pstore_module parameter to efivars to allow disabling its
use as a backend for pstore. Also add a config option,
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE, to allow setting the default
value of this paramter to true (i.e. disabled by default).

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-21 12:43:46 +00:00
Seth Forshee
ed9dc8ce7a efivars: Allow disabling use as a pstore backend
Add a new option, CONFIG_EFI_VARS_PSTORE, which can be set to N to
avoid using efivars as a backend to pstore, as some users may want to
compile out the code completely.

Set the default to Y to maintain backwards compatability, since this
feature has always been enabled until now.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-03-21 12:43:46 +00:00
Martin Schwidefsky
1fcbba3d65 s390/3270: fix minor_start issue
The 3270 device nodes 227/0 and 228/0 are special. 227/0 is never used,
and 228/0 is used to redirect full screen applications from /dev/3270/tub
to the real device node of the 3270 terminal.
To keep the device names /dev/3270/tty<x> consistent with the minor number
the device driver sets minor_start to 0 and skips minor 0. That makes the
tty index equivalent to the minor number. But doing so seems to causes
problems with init scripts.
A better solution is to set minor_start to the correct value of 1 and
set name_base to 1 as well. tty_register_device will then automatically
create the correct tty name.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-21 13:35:39 +01:00
Heiko Carstens
b7fef2dd72 s390/uaccess: fix clear_user_pt()
The page table walker variant of clear_user() is supposed to copy the
contents of the empty zero page to user space.
However since 238ec4ef "[S390] zero page cache synonyms" empty_zero_page
is not anymore the page itself but contains the pointer to the empty zero
pages. Therefore the page table walker variant of clear_user() copied
the address of the first empty zero page and afterwards more or less
random data to user space instead of clearing the given user space range.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-21 13:35:38 +01:00
Wei Yongjun
94f9852de8 s390/scm_blk: fix error return code in scm_blk_init()
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-21 13:35:38 +01:00
Sebastian Ott
3bff6038f1 s390/scm_block: fix printk format string
Use hex digits when referring to scm addresses.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-21 13:35:37 +01:00
Heiko Carstens
6c43a51961 drivers/Kconfig: add several missing GENERIC_HARDIRQS dependencies
With this patch an allmodconfig finally builds on s390 again.

Fixes these build errors:

ERROR: "devm_request_threaded_irq" [drivers/spi/spi-altera.ko] undefined!
ERROR: "devm_request_threaded_irq" [drivers/media/platform/sh_veu.ko] undefined!
ERROR: "devm_request_threaded_irq" [drivers/dma/dw_dmac.ko] undefined!

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-21 13:35:37 +01:00
Tomi Valkeinen
6cd2c7db41 videomode: videomode_from_timing work
We currently have videomode_from_timing(), which takes one
display_timing entry from display_timings.

To make it easier to use display_timing without display_timings, this
patch renames videomode_from_timing() to videomode_from_timings(), and
adds a new videomode_from_timing() which just converts a given
display_timing to videomode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
2013-03-21 14:34:33 +02:00
Grazvydas Ignotas
249751f223 usb: phy: twl4030-usb: poll for ID disconnect
On pandora, STS_USB interrupt doesn't arrive on USB host cable disconnect
for some reason while VBUS is driven by twl itself, but STS_HW_CONDITIONS
is updated correctly. It does work fine when PHY is powered down though.
To work around that we have to poll.

This patch also moves twl->linkstat update code to callers so that
changes can be handled in thread safe way (as polling work can trigger
at the same time as real irq now).

TI PSP kernels have similar workarounds, so (many?) more boards are likely
affected.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-21 14:20:30 +02:00
Grazvydas Ignotas
15460de7f3 usb: phy: twl4030-usb: don't switch the phy on/off needlessly
With runtime_pm in place there is no longer need to turn the phy
on/off in OTG layer on cable connect/disconnect, OMAP glue does
this through otg.set_suspend() callback after it's called through
omap_musb_mailbox() on VBUS/ID interrupt. Not doing this will save
power when cable is connected but no gadget driver is loaded.

This will also have side effect of automatic USB charging no longer
working without twl4030_charger driver, because a regulator needed
for charging will no longer be enabled, so be sure to enable charger
driver if charging is needed.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-21 14:20:29 +02:00
Grazvydas Ignotas
ca4f70ce78 usb: phy: twl4030-usb: ignore duplicate events
In some rare cases we may get multiple interrupts that will generate
duplicate omap_musb_mailbox() calls. This is a problem because each
VBUS/ID event generates runtime_pm call in OMAP glue code, causing
unbalanced gets or puts and breaking PM.

The same goes for initial state, glue already defaults to "no cable"
state, so only bother it if we have VBUS or ID.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-21 14:20:29 +02:00
Grazvydas Ignotas
44a50d088a usb: phy: twl4030-usb: don't enable PHY during init
There is no need to do it, otg.set_suspend(false) (which itself
comes from runtime_pm OMAP glue calls) will enable it later anyway.
This used to be the place where things were enabled if booted with
cable connected before runtime_pm conversion, but now can be dropped.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-21 14:20:28 +02:00
Stephane Eranian
dd9c086d9f perf: Fix ring_buffer perf_output_space() boundary calculation
This patch fixes a flaw in perf_output_space(). In case the size
of the space needed is bigger than the actual buffer size, there
may be situations where the function would return true (i.e.,
there is space) when it should not. head > offset due to
rounding of the masking logic.

The problem can be tested by activating BTS on Intel processors.
A BTS record can be as big as 16 pages. The following command
fails:

  $ perf record -m 4 -c 1 -e branches:u my_test_program

You will get a buffer corruption with this. Perf report won't be
able to parse the perf.data.

The fix is to first check that the requested space is smaller
than the buffer size. If so, then the masking logic will work
fine. If not, then there is no chance the record can be saved
and it will be gracefully handled by upper code layers.

[ In v2, we also make the logic for the writable more explicit by
  renaming it to rb->overwrite because it tells whether or not the
  buffer can overwrite its tail (suggested by PeterZ). ]

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: peterz@infradead.org
Cc: jolsa@redhat.com
Cc: fweisbec@gmail.com
Link: http://lkml.kernel.org/r/20130318133327.GA3056@quad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-21 12:04:35 +01:00
Stephane Eranian
0e48026ae7 perf/x86: Fix uninitialized pt_regs in intel_pmu_drain_bts_buffer()
This patch fixes an uninitialized pt_regs struct in drain BTS
function. The pt_regs struct is propagated all the way to the
code_get_segment() function from perf_instruction_pointer()
and may get garbage.

We cannot simply inherit the actual pt_regs from the interrupt
because BTS must be flushed on context-switch or when the
associated event is disabled. And there we do not have a pt_regs
handy.

Setting pt_regs to all zeroes may not be the best option but it
is not clear what else to do given where the drain_bts_buffer()
is called from.

In V2, we move the memset() later in the code to avoid doing it
when we end up returning early without doing the actual BTS
processing. Also dropped the reg.val initialization because it
is redundant with the memset() as suggested by PeterZ.

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: peterz@infradead.org
Cc: sqazi@google.com
Cc: ak@linux.intel.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/20130319151038.GA25439@quad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-21 12:03:29 +01:00
Mauro Carvalho Chehab
c8b8fdb39d [media] siano: add MODULE_FIRMWARE() macros
This driver can use several firmwares. Provide such info at
module firmware metadata.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:54:21 -03:00
Mauro Carvalho Chehab
11ad03a563 [media] siano: use defines for firmware names
There are too many firmwares there. As we need to add
MODULE_FIMWARE() macros, the better is to define their names
on just one place and use the macros for both cards/device type
tables and MODULE_FIRMWARE().

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:54:13 -03:00
Mauro Carvalho Chehab
d8a18e88c9 [media] siano: Remove bogus complain about MSG_SMS_DVBT_BDA_DATA
When the driver is tuned into chanel, and it is removed/reinserted,
the message stream data may be arriving during device probe:
	[ 5680.162004] smscore_set_device_mode: set device mode to 6
	[ 5680.162267] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.162391] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.162641] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.162891] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.163016] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.163266] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.163516] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.163640] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.163891] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.164016] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.164265] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.164515] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.164519] smscore_onresponse: Firmware id 6 prots 0x40 ver 8.1
	[ 5680.164766] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.166018] smscore_onresponse: message MSG_SMS_DVBT_BDA_DATA(693) not handled.
	[ 5680.166438] DVB: registering new adapter (Siano Rio Digital Receiver)
Instead of complaining, just silently discard those messages, instead of
complaining.
A proper fix is to put the device on suspend/power down mode when the module
is removed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:53:59 -03:00
Mauro Carvalho Chehab
98c3f94e6d [media] siano: remove doubled new line
sms_debug() and sms_info() already adds a '\n' at the printed
strings. No need to add more.
That helps to cleanup stuff like:
	[ 4868.205648] smscore_onresponse: message not handled.
	[ 4868.205898] smscore_onresponse: message not handled.
and:
	[ 5467.959769] smscore_onresponse:
	data rate 143069 bytes/secs
While here, provides the message name, when the message is not
handled by the smsmdtv core.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:53:50 -03:00
Mauro Carvalho Chehab
07bb6bdddf [media] siano: remove a bogus printk line
The logic that detects the types of sms devices is bogus. It returns
	[ 4645.187790] smsusb_init_device: line: 372: Unspecified sms device type!
For several devices, including the one I have (SMS_RIO). In a matter
of fact, the right thing to do there is to print an error only if
the device is really unknown (SMS_UNKNOWN_TYPE).

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:53:42 -03:00
Mauro Carvalho Chehab
beb91d461b [media] siano: add a MAINTAINERS entry for it
Nobody is maintaining this driver. The project started by a
developer that used to work at Hauppauge. A Siano developer
assumed its maintainership after that, but he left the company.
Another Siano developer sent several patches updating it, but,
after upstream feedback, it seems he gave up merging the driver,
as he never answered back to the received feedbacks.
As I have a few siano devices here that work with ISDB-T, I
can help to keep it into a good shape. So, better to take its
maintainership.
I don't have any siano SDIO setup here, trough. So, I'll just
apply without any test any patch that looks sane and touches
only drivers/media/mmc/siano. So, let's tag it as "Odd fixes".

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:53:33 -03:00
Mauro Carvalho Chehab
2a7643159d [media] siano: reorder smscore_get_fw_filename() function
Put this function earlier in the code, to avoid the need of
defining a function stub.
No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:53:26 -03:00
Mauro Carvalho Chehab
e584f9d61e [media] siano: remove the bogus firmware lookup code
There is an special lookup code that is called when
SMS_BOARD_UNKNOWN. The logic there is bogus and will cause
an oops, as .type is SMS_UNKNOWN_TYPE (-1).
As the code would do:
	return smscore_fw_lkup[type][mode];
That would mean that it would try to go past the
smscore_fw_lkup table.
So, just remove that bogus code, simplifying the logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:52:57 -03:00
Mauro Carvalho Chehab
9711a8a600 [media] siano: honour per-card default mode
Instead of using a global default_mode, passed via modprobe
parameter, use the one defined inside the cards struct.
That will prevent the need of manually specify it for each
board, except, of course, if the user wants to do something
different, on boards that accept multiple types.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:52:48 -03:00
Mauro Carvalho Chehab
5ac14b6011 [media] siano: simplify firmware lookup logic
There are two ways to specify firmware for siano devices: a
per-device ID and a per-device type.
The per-device type logic is currently made by a 11x9 string
table, sparsely filled. It is very hard to read the table at
the source code, as there are too much "none" filling there
("none" there is a way to tell NULL).
Instead of using such problematic table, convert it into an
easy to read table, where the unused values will be defaulted
to NULL.
While here, also simplifies a little bit the logic and print
a message if an user-selected mode doesn't exist.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:52:37 -03:00
Mauro Carvalho Chehab
6a28bd94f4 [media] siano: add support for .poll on debugfs
Implement poll() method for debugfs and be sure that the
debug_data won't be freed on ir or on read().
With this change, poll() will return POLLIN if either data was
filled or if data was read. That allows read() to return 0
to indicate EOF in the latter case.
As poll() is now provided, fix support for non-block mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:52:29 -03:00
Mauro Carvalho Chehab
773adad141 [media] siano: fix status report with old firmware and ISDB-T
This seems to be ever broken. That's the status report with
Firmware 2.1, before adding support for sms2270 is:
[22273.787218] smsdvb_onresponse: MSG_SMS_GET_STATISTICS_RES
[22273.792592] IsRfLocked = 1
[22273.792592] IsDemodLocked = 1
...
[22273.792598] TransmissionMode = -64
...
(all unshown fields are filled with zeros)
Of course, transmission mode being a negative number is wrong.
So, we need to take a deeper look on it.
With the debugfs patches applied, it is possible to see that, instead
of filling StatisticsType with 5, and FullSize with the size of the
payload (this is what happens with sms2270 and firmware 8.1),
those fields are also initialized with zero:
StatisticsType = 0	FullSize = 0
IsRfLocked = 1		IsDemodLocked = 1	IsExternalLNAOn = 0
SNR = 0 dB		RSSI = 0 dBm		InBandPwr = 0 dBm
CarrierOffset = 0	Bandwidth = 0		Frequency = 0 Hz
TransmissionMode = -64	ModemState = 0		GuardInterval = 0
SystemType = 0		PartialReception = 0	NumOfLayers = 0
SmsToHostTxErrors = 0
The data under "TransmissionMode" varies according with the signal,
and it is negative. It also matches the value for InBandPwr when
the tuner is on DVB-T (ok, signal doesn't lock, but the power level
should be about the same with the antena fixed, and measured at about
the same time).
So, there's a very high chance that, when StatisticsType is zero, the
signal strength is at the same position as Transmission Mode.
So, discard all other parameters, and provide only signal/rf lock and
signal strength if StatisticsType is 0, for ISDB-T.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:52:16 -03:00
Mauro Carvalho Chehab
e1b2ac4d1e [media] siano: Only feed DVB data when there's a feed
Right now, the driver sends DVB data even before tunning.
It was noticed that this may lead into some mistakes at DVB
decode, as the PIDs from wrong channels may be associated with
another frequency, as they may already be inside the PID buffers.
So, prevent it by not feeding DVB demux with data while there's no
feed or while the device is not tuned.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:52:05 -03:00
Mauro Carvalho Chehab
5c3b87435b [media] siano: Fix bandwidth report
It was expected that the bandwidth would be following the defines
at smscoreapi.h. However, this doesn't work. Instead, this field
brings just the bandwidth in MHz. Convert it to Hertz.
It should be noticed that, on ISDB, using the _EX request, the
field TuneBW seems to show the value that matches the bandwidth
code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:51:47 -03:00
Mauro Carvalho Chehab
9671045f4c [media] siano: fix PER/BER report on DVBv5
The check for lock logic is broken. Due to that, no PER/BER
stats will ever be showed, and the DVBV3 events will be wrong.
Also, the per-layer PER/BER stats for ISDB-T are filled with
the wrong index.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:49:32 -03:00
Mauro Carvalho Chehab
f5de95e246 [media] siano: fix signal strength and CNR stats measurements
There are a number of small issues with the stats refactoring:
	- InBandPwr better represents the signal strength;
	- Don't zero signal strength /cnr if no lock;
	- Fix signal strength/cnr scale;
	- Don't need to fill PER/BER if not locked, as the
	  code will disable those stats anyway.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21 07:49:17 -03:00