Commit graph

388,156 commits

Author SHA1 Message Date
Arnd Bergmann
553e7f75a1 ARM: spear: rename duplicate pl080_plat_data
Both spear3xx and spear6xx have a global symbol named
pl080_plat_data. Eventually, both should be removed, but
for now, we can rename one to pl080_plat_data and declare
it static, since that one does not actually need to be
visible outside of spear6xx.c.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-03-12 17:40:07 +01:00
Lukas Czerner
4f42f80a8f ext4: use s_extent_max_zeroout_kb value as number of kb
Currently when converting extent to initialized, we have to decide
whether to zeroout part/all of the uninitialized extent in order to
avoid extent tree growing rapidly.

The decision is made by comparing the size of the extent with the
configurable value s_extent_max_zeroout_kb which is in kibibytes units.

However when converting it to number of blocks we currently use it as it
was in bytes. This is obviously bug and it will result in ext4 _never_
zeroout extents, but rather always split and convert parts to
initialized while leaving the rest uninitialized in default setting.

Fix this by using s_extent_max_zeroout_kb as kibibytes.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-03-12 12:40:04 -04:00
Arnd Bergmann
d9909ebe65 ARM: spear: make clock driver independent of headers
Device drivers should not access MMIO registers through hardcoded
platform specific address constants. Instead, we can pass the
MMIO token to the spear clock driver in the initialization routine
to contain that knowledge in the platform code itself.

Ideally, the clock driver would use of_iomap() or similar to
get the address, and that can be used later, but for now, this
is the minimal change.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-03-12 17:39:58 +01:00
Arnd Bergmann
2b9c613c4e ARM: spear: move generic.h and pl080.h into private dir
No file outside of mach-spear includes these files any more,
so they don't have to be globally visible now.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-03-12 17:39:53 +01:00
Arnd Bergmann
a7ed099ffc ARM: spear: move all files to mach-spear
There are no conflicting files between the three mach-spear* directories
and plat-spear any more, so we can now move all file to a common
mach-spear directory.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-03-12 17:39:47 +01:00
Arnd Bergmann
0ec05c3e4a ARM: spear: move spear.h and misc_regs.h into plat-spear
The spear13xx version of spear.h is completely different from
the newly combined spear3xx/spear6xx version, but we can never
build ARMv5 and ARMv7 platforms together, so there is no
harm in putting all the contents into a single file and adding
appropriate ifdefs.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-03-12 17:39:41 +01:00
Arnd Bergmann
4b6effb6ff ARM: spear: merge Kconfig files
As a preparation to merging the spear platforms into one directory, this
merges the four Kconfig files into one.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-03-12 17:39:36 +01:00
Arnd Bergmann
d42799b782 ARM: spear: make spear3xx/6xx mach/spear.h files identical
The two files are almost identical already basically just differ
in the identifier names. By changing the identifiers to be the
same, we are able to merge the two as a preparation to building
a combined kernel.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-03-12 17:39:31 +01:00
Arnd Bergmann
83f230f112 ARM: spear: move identical headers to plat-spear/include/mach
As an intermediate step towards unification of the three spear
platforms, this gets rid of the mach/* header files that are
obviously not platform specific.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-03-12 17:39:26 +01:00
Arnd Bergmann
5447521094 ARM: spear: unify mach/generic.h and mach/irqs.h
These are indeed easy to combine, as there are no conflicting
definitions in generic.h, and irqs.h will be obsolete once
we enable SPARSE_IRQ.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-03-12 17:39:02 +01:00
Arnd Bergmann
17dd1094e4 ARM: spear13xx: make mach/dma.h local
There is no reason for this header file to be globally visible, so
let's just move it into the mach directory.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-03-12 17:38:38 +01:00
Linus Torvalds
fa4a6732a8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull key management race fix from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  keys: fix race with concurrent install_user_keyrings()
2013-03-12 09:36:19 -07:00
Linus Torvalds
368edaadc0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph fix from Sage Weil:
 "This fixes a bug in the new message decoding that just went in during
  the last window."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: fix decoding of pgids
2013-03-12 09:22:42 -07:00
Linus Torvalds
5b22b1848b Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfixes from Bruce Fields:
 "Some minor fallout from the user-namespace work broke most krb5 mounts
  to nfsd, and I screwed up a change to the AF_LOCAL rpc code."

* 'for-3.9' of git://linux-nfs.org/~bfields/linux:
  sunrpc: don't attempt to cancel unitialized work
  nfsd: fix krb5 handling of anonymous principals
2013-03-12 09:20:58 -07:00
Zhang Yanfei
f4309c0f14 driver: staging: csr: remove cast for kmalloc return value
remove cast for kmalloc return value.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 09:09:08 -07:00
Devendra Naga
8dd4a96652 staging: et131x: fix invalid fail after the call to eeprom_wait_ready
should be err < 0 instead of if (err) which actually the read register
value can be a positive number

Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 09:09:08 -07:00
Frank Mori Hess
f165d815d5 staging: comedi: adv_pci1724: new driver
New comedi driver for Advantech PCI-1724U with modifications by Ian
Abbott <abbotti@mev.co.uk>.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmh6jj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 09:09:08 -07:00
Ian Abbott
94cc409be7 staging: comedi: adv_pci1710: restore PCI-1710HG support
The Advantech PCI-1710HG is similar to the PCI-1710 but has a different
set of ranges for analog input (HG = high gain).  Because they share the
same PCI vendor and device ID, the adv_pci1710 driver does not currently
distinguish them.  This is more of a problem since auto-configuration
code was added to the driver (and manual configuration support removed),
as the PCI-1710HG would be automatically configured as a PCI-1710.  More
recently, the unused code for PCI-1710HG support was #ifdef'ed out.

In fact, the PCI-1710 and PCI-1710HG can be distinguished by considering
the PCI subvendor and subdevice IDs according to the following table:

vendor device subven subdev model        treat as
====== ====== ====== ====== ============ ==========
0x13fe 0x1710 0x10b5 0x9050 PCI-1710S    PCI-1710
0x13fe 0x1710 0x13fe 0x0000 PCI-1710     PCI-1710
0x13fe 0x1710 0x13fe 0xb100 PCI-1710B    PCI-1710
0x13fe 0x1710 0x13fe 0xb200 PCI-1710B2   PCI-1710
0x13fe 0x1710 0x13fe 0xc100 PCI-1710C    PCI-1710
0x13fe 0x1710 0x13fe 0xc200 PCI-1710C2   PCI-1710
0x13fe 0x1710 0x1000 0xd100 PCI-1710U    PCI-1710
0x13fe 0x1710 0x13fe 0x0002 PCI-1710HG   PCI-1710HG
0x13fe 0x1710 0x13fe 0xb102 PCI-1710HGB  PCI-1710HG
0x13fe 0x1710 0x13fe 0xb202 PCI-1710HGB2 PCI-1710HG
0x13fe 0x1710 0x13fe 0xc102 PCI-1710HGC  PCI-1710HG
0x13fe 0x1710 0x13fe 0xc202 PCI-1710HGC2 PCI-1710HG
0x13fe 0x1710 0x1000 0xd102 PCI-1710HGU  PCI-1710HG

The above information is extracted from Advantech's own GPL'ed Linux
(non-Comedi) driver source from "advdaq-1.10.0001-1.tar.bz2" on their
website.

(0x13fe = PCI_VENDOR_ID_ADVANTECH, 0x10b5 = PCI_VENDOR_ID_PLX, 0x9050 =
PCI_DEVICE_ID_PLX_9050, 0x1000 = PCI_VENDOR_ID_NCR or
PCI_VENDOR_ID_LSI_LOGIC but I assume this subvendor ID was chosen
"randomly".)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 09:09:08 -07:00
Steven Rostedt (Red Hat)
2721e72dd1 tracing: Fix race in snapshot swapping
Although the swap is wrapped with a spin_lock, the assignment
of the temp buffer used to swap is not within that lock.
It needs to be moved into that lock, otherwise two swaps
happening on two different CPUs, can end up using the wrong
temp buffer to assign in the swap.

Luckily, all current callers of the swap function appear to have
their own locks. But in case something is added that allows two
different callers to call the swap, then there's a chance that
this race can trigger and corrupt the buffers.

New code is coming soon that will allow for this race to trigger.

I've Cc'd stable, so this bug will not show up if someone backports
one of the changes that can trigger this bug.

Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-12 11:56:33 -04:00
Steve Conklin
a57e82a187 usb: serial: Add Rigblaster Advantage to device table
The Rigblaster Advantage is an amateur radio interface sold by West Mountain
Radio. It contains a cp210x serial interface but the device ID is not in
the driver.

Signed-off-by: Steve Conklin <sconklin@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 08:54:41 -07:00
Paul Bolle
c51d41a1dd tty: serial: fix typo "SERIAL_S3C2412"
The Kconfig symbol SERIAL_S3C2412 got removed in commit
da121506eb ("serial: samsung: merge
probe() function from all SoC specific extensions"). But it also added a
last reference to that symbol. The commit and the tree make clear that
CPU_S3C2412 should have been used instead.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 08:53:23 -07:00
Josh Boyer
f2b8dfd9e4 serial: 8250: Keep 8250.<xxxx> module options functional after driver rename
With commit 835d844d1 (8250_pnp: do pnp probe before legacy probe), the
8250 driver was renamed to 8250_core.  This means any existing usage of
the 8259.<xxxx> module parameters or as a kernel command line switch is
now broken, as the 8250_core driver doesn't parse options belonging to
something called "8250".

To solve this, we redefine the module options in a dummy function using
a redefined MODULE_PARAM_PREFX when built into the kernel.  In the case
where we're building as a module, we provide an alias to the old 8250
name.  The dummy function prevents compiler errors due to global variable
redefinitions that happen as part of the module_param_ macro expansions.

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 08:53:23 -07:00
Paul Bolle
827aa0d36d tty: serial: fix typo "ARCH_S5P6450"
This could have been either ARCH_S5P64X0 or CPU_S5P6450. Looking at
commit 2555e663b3 ("ARM: S5P64X0: Add UART
serial support for S5P6450") - which added this typo - makes clear this
should be CPU_S5P6450.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 08:53:23 -07:00
Sean Young
77e372a3d8 tty/8250_pnp: serial port detection regression since v3.7
The InsydeH2O BIOS (version dated 09/12/2011) has the following in
its pnp resouces for its serial ports:

$ cat /sys/bus/pnp/devices/00:0b/resources
state = active
io disabled
irq disabled

We do not check if the resources are disabled, and create a bogus
ttyS* device. Since commit 835d844d1a (8250_pnp: do pnp probe
before legacy probe) we get a bogus ttyS0, which prevents the legacy
probe from detecting it.

Note, the BIOS can also be upgraded, fixing this problem, but for people
who can't do that, this fix is needed.

Reported-by: Vincent Deffontaines <vincent@gryzor.com>
Tested-by: Vincent Deffontaines <vincent@gryzor.com>
Signed-off-by: Sean Young <sean@mess.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 08:53:23 -07:00
Jonas Gorski
064256feab serial: bcm63xx_uart: fix compilation after "TTY: switch tty_insert_flip_char"
92a19f9cec introduced a local variable
with the same name as the argument to bcm_uart_do_rx, breaking
compilation. Fix this by renaming the new variable and its uses where
expected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 08:53:23 -07:00
Wang YanQing
8d2f8cd424 serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller
01:08.0 Communication controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01)
	Subsystem: Device [1000:0012]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 20
	Region 0: I/O ports at e050 [size=8]
	Region 1: I/O ports at e040 [size=8]
	Region 2: I/O ports at e030 [size=8]
	Region 3: I/O ports at e020 [size=8]
	Region 4: I/O ports at e010 [size=8]
	Region 5: I/O ports at e000 [size=16]

Signed-off-by: Wang YanQing <udknight@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 08:53:23 -07:00
Scott Ashcroft
d13402a4a9 Fix 4 port and add support for 8 port 'Unknown' PCI serial port cards
I've managed to find an 8 port version of the card 4 port card which was discussed here:

http://marc.info/?l=linux-serial&m=120760744205314&w=2

Looking back at that thread there were two issues in the original patch.

1) The I/O ports for the UARTs are within BAR2 not BAR0. This can been seen in the original post.
2) A serial quirk isn't needed as these cards have no memory in BAR0 which makes pci_plx9050_init just return.

This patch fixes the 4 port support to use BAR2, removes the bogus quirk and adds support for the 8 port card.

$ lspci -vvv -n -s 00:08.0
00:08.0 0780: 10b5:9050 (rev 01)
	Subsystem: 10b5:1588
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 17
	Region 1: I/O ports at ff00 [size=128]
	Region 2: I/O ports at fe00 [size=64]
	Region 3: I/O ports at fd00 [size=8]
	Capabilities: <access denied>
	Kernel driver in use: serial

$ dmesg | grep 0000:00:08.0:
[    0.083320] pci 0000:00:08.0: [10b5:9050] type 0 class 0x000780
[    0.083355] pci 0000:00:08.0: reg 14: [io  0xff00-0xff7f]
[    0.083369] pci 0000:00:08.0: reg 18: [io  0xfe00-0xfe3f]
[    0.083382] pci 0000:00:08.0: reg 1c: [io  0xfd00-0xfd07]
[    0.083460] pci 0000:00:08.0: PME# supported from D0 D3hot
[    1.212867] 0000:00:08.0: ttyS4 at I/O 0xfe00 (irq = 17) is a 16550A
[    1.233073] 0000:00:08.0: ttyS5 at I/O 0xfe08 (irq = 17) is a 16550A
[    1.253270] 0000:00:08.0: ttyS6 at I/O 0xfe10 (irq = 17) is a 16550A
[    1.273468] 0000:00:08.0: ttyS7 at I/O 0xfe18 (irq = 17) is a 16550A
[    1.293666] 0000:00:08.0: ttyS8 at I/O 0xfe20 (irq = 17) is a 16550A
[    1.313863] 0000:00:08.0: ttyS9 at I/O 0xfe28 (irq = 17) is a 16550A
[    1.334061] 0000:00:08.0: ttyS10 at I/O 0xfe30 (irq = 17) is a 16550A
[    1.354258] 0000:00:08.0: ttyS11 at I/O 0xfe38 (irq = 17) is a 16550A

Signed-off-by: Scott Ashcroft <scott.ashcroft@talk21.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 08:53:23 -07:00
Ley Foon Tan
e06c93cacb tty/serial: Add support for Altera serial port
Add support for Altera 8250/16550 compatible serial port.

Signed-off-by: Ley Foon Tan <lftan@altera.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 08:53:23 -07:00
Tony Prisk
5771a8051d tty: serial: vt8500: Unneccessary duplicated clock code removed
Remove the extra code left over when the serial driver was changed
to require a clock. There is no fallback to 24Mhz as a clock is
now required.

Also remove a second call to of_clk_get which is unnecessary.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 08:53:22 -07:00
Anatolij Gustschin
09081e5b47 tty: serial: mpc5xxx: fix PSC clock name bug
mpc512x platform clock code names PSC clocks as "pscX_mclk" but
the driver tries to get "pscX_clk" clock and this results in
errors like:

  mpc52xx-psc-uart 80011700.psc: Failed to get PSC clock entry!

The problem appears when opening ttyPSC devices other than the
system's serial console. Since getting and enabling the PSC clock
fails, uart port startup doesn't succeed and tty flag TTY_IO_ERROR
remains set causing further errors in tty ioctls, i.e.
'strace stty -F /dev/ttyPSC1' shows:

open("/dev/ttyPSC1", O_RDONLY|O_NONBLOCK|O_LARGEFILE) = 3
dup2(3, 0)                              = 0
close(3)                                = 0
fcntl64(0, F_GETFL)                     = 0x10800 (flags O_RDONLY|O_NONBLOCK|O_LARGEFILE)
fcntl64(0, F_SETFL, O_RDONLY|O_LARGEFILE) = 0
ioctl(0, TCGETS, 0xbff89038)            = -1 EIO (Input/output error)

Only request PSC clock names that the platform actually provides.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 08:53:22 -07:00
Dmitry Torokhov
1614265526 USB: cdc-acm - blacklist IMS PCU device
The IMS PCU (Passenger Control Unit) device used custom protocol over serial
line, so it is presenting itself as CDC ACM device.

Now that we have proper in-kernel driver for it we need to black-list the
device in cdc-acm driver.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12 08:50:23 -07:00
Dmitry Torokhov
628329d524 Input: add IMS Passenger Control Unit driver
The PCU is a device installed in the armrest of a plane seat and
is connected to IMS Rave Entertainment System. It has a set of control
buttons (Volume Up/Down, Attendant, Lights, etc) on one side and
gamepad-like controls on the other side.

Originally the device was handled from userspace and because of that
it presents itself on USB bus as a CDC-ACM modem device that however
can not make calls. However the custom handling is not as convenient
as using standard input subsystem facilities. If it was pure input
device it would be possible to continue using userspace solution
(moving it over to uinput), but the device also has backlighted keys
which can not be supported via uinput.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12 08:50:22 -07:00
Dmitry Torokhov
5a1bbf2132 Input: add new keycodes for passenger control units
Entertainment systems used in aircraft need additional keycodes for their
Passenger Control Units, so let's add them.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12 08:50:21 -07:00
Markus Pargmann
d73a17e6c8 Input: wm9712 - fix dev_dbg newlines
dev_dbg should end with a new line.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12 08:50:20 -07:00
Markus Pargmann
540792753c Input: wm9712 - fix wrong pen up readings
Often a reading can be wrong. This patch assures that this is really a
pen up event and not a false reading.

Based on wm9712: pen up by Teresa Gámez and Christian Hemp.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12 08:50:20 -07:00
Markus Pargmann
fa45255ee7 Input: wm9712 - fix return code for wrong sample
Instead of interpreting a wrong measurement as pen up, we should
try to read again.

Based on wm9712: pen up by Teresa Gámez and Christian Hemp.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12 08:50:19 -07:00
Markus Pargmann
cfd5d09691 Input: wm97xx - drop out of range inputs
With fast movements, there occured some out of screen jumps with my
touchscreen. The abs_x and abs_y module parameters should fix this by
default, but the driver doesn't actively checks the x/y coordinates.

Instead it seems that the input layer was supposed to drop out of range
inputs, as described in the comments:
"These parameters are used to help the input layer discard out of
range readings and reduce jitter etc"

The input layer documentation describes that values that are not in the
absolute range are also accepted.

So this patch adds a check within the driver.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12 08:50:18 -07:00
Daniel Hellstrom
b4a034dab1 Input: add support for GRLIB APBPS2 PS/2 Keyboard/Mouse
APBPS2 is a PS/2 core part of GRLIB found in SPARC32/LEON
products.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-12 08:50:06 -07:00
David J. Choi
c1ad32af5e ks8851_mll: basic ethernet statistics
Implement to collect ethernet statistical information on ks8851_mll device.

Signed-off-by: David J. Choi <david.choi@micrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12 11:49:31 -04:00
Li RongQing
c80a8512ee net/core: move vlan_depth out of while loop in skb_network_protocol()
[ Bug added added in commit 05e8ef4ab2 (net: factor out
  skb_mac_gso_segment() from skb_gso_segment() ) ]

move vlan_depth out of while loop, or else vlan_depth always is ETH_HLEN,
can not be increased, and lead to infinite loop when frame has two vlan headers.

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12 11:47:40 -04:00
Takashi Iwai
b5f82b1044 ALSA: hda - Fix snd_hda_get_num_raw_conns() to return a correct value
In the connection list expansion in hda_codec.c and hda_proc.c, the
value returned from snd_hda_get_num_raw_conns() is used as the array
size to store the connection list.  However, the function returns
simply a raw value of the AC_PAR_CONNLIST_LEN parameter, and the
widget list with ranges isn't considered there.  Thus it may return a
smaller size than the actual list, which results in -ENOSPC in
snd_hda_get_raw_conections().

This patch fixes the bug by parsing the connection list correctly also
for snd_hda_get_num_raw_conns().

Reported-and-tested-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-12 16:47:30 +01:00
Zhang Yanfei
f754e913e5 driver: isdn: hisax: remove cast for kmalloc/kzalloc return value
remove cast for kmalloc/kzalloc return value.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12 11:40:54 -04:00
Zhang Yanfei
c3f14cf924 driver: isdn: capi: remove cast for kmalloc return value
remove cast for kmalloc return value.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12 11:40:54 -04:00
Michael Stapelberg
3871c3876f mv643xx_eth with 88E1318S: support Wake on LAN
This has been tested on a qnap TS-119P II. Note that enabling WOL with
"ethtool -s eth0 wol g" is not enough; you also need to tell the PIC
microcontroller inside the qnap that WOL should be enabled by sending
0xF2 with qcontrol(1) and you have to disable EUP ("Energy-using
Products", a European power-saving thing) by sending 0xF4.

Signed-off-by: Michael Stapelberg <michael@stapelberg.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12 11:40:54 -04:00
Michael Stapelberg
42e836eb45 phy: add set_wol/get_wol functions
This allows ethernet drivers (such as the mv643xx_eth) to support
Wake on LAN on platforms where PHY registers have to be configured
for Wake on LAN (e.g. the Marvell Kirkwood based qnap TS-119P II).

Signed-off-by: Michael Stapelberg <michael@stapelberg.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12 11:40:53 -04:00
Chen Gang
45549a68a5 ARM:net: an issue for k which is u32, never < 0
k is u32 which never < 0, need type cast, or cause issue.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Mircea Gherzan <mgherzan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12 11:33:05 -04:00
Al Viro
a930d87905 vfs: fix pipe counter breakage
If you open a pipe for neither read nor write, the pipe code will not
add any usage counters to the pipe, causing the 'struct pipe_inode_info"
to be potentially released early.

That doesn't normally matter, since you cannot actually use the pipe,
but the pipe release code - particularly fasync handling - still expects
the actual pipe infrastructure to all be there.  And rather than adding
NULL pointer checks, let's just disallow this case, the same way we
already do for the named pipe ("fifo") case.

This is ancient going back to pre-2.4 days, and until trinity, nobody
naver noticed.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12 08:29:17 -07:00
Arnd Bergmann
7b59496c11 This patch fixes a boot breakage on DA830
that was introduced with EDMA DMA engine
 conversion. The bug has been there since
 v3.7 and has been marked for stable update.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJRPxSaAAoJEGFBu2jqvgRNxe4P/0LxjmS4FdSIbV8rwN10mnNX
 YQLyGy5Iu0jnoBCtKBBoLtQyK6BD5KCIGmx2WgL10K19dSwDPIR6SKljEnRqegVB
 xZS2jUE2GaaoDgkSr3K9CGblqwVUSDnrJ6ZhzYTTG4qXF9fNWkwqjw1YPqNmusGa
 jrZGtlbcMylaa9ouykGKRPm6ypWL0+CwtDD/t4GTLblj04ms+WLlZR+Zi9tmyW+M
 JO9WW+1sevnoGilNzR8q9wEkAHxP3ArIrADWAeO5c25mr4C5PXcPWccbKH6I8dFF
 jYed/+hvx7H+ieqkWa0xdOpHRc89VD564bli0NEIQ6NYXDME7OFtA70ophTf6aL5
 FOoWAgLxSbcjlu4okPibwVbkDGa+L4sCq41AVUh301mClI8UIflTA2yuQq+dDTi8
 xL5FQFyScYQn/aUBkxblTnkPowBHVbV02xgs5rIyPvXvWB1vUAVxYVyd86KEw18k
 GA2R6Vtvlu6P/BLsZ4ISmSVwTQV3rZX036YUqV5rkQxVx/iAca0H2Y8qhimiNxD4
 uun/8MHJF91ad5++9QRF29jSIx3iX30frnmbmaek3yZVkGMdgswyZMOheretwHM9
 unY4zZy5pRiL98gu71/hOYHhp2O8AvRV6tKDpM0gpgz08sJlPz+/8tWJ31dOQIGT
 J3Z3p2l924/L9H760UxC
 =pToj
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v3.9-rc/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes

Via Sekhar Nori <nsekhar@ti.com>:

This patch fixes a boot breakage on DA830
that was introduced with EDMA DMA engine
conversion. The bug has been there since
v3.7 and has been marked for stable update.

* tag 'davinci-for-v3.9-rc/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-12 15:04:06 +01:00
Tomi Valkeinen
694f050650 videomode: remove timing_entry_index
Display timing's fields have minimum, typical and maximum values. These
can be accessed by using timing_entry_index enum, and
display_timing_get_value() function.

There's no real need for this extra complexity. The values can be
accessed more easily by just using the min/typ/max fields.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
2013-03-12 15:46:52 +02:00
Tomi Valkeinen
32ed6ef133 videomode: create enum for videomode's display flags
Instead of having plain defines for the videomode's flags, add an enum
for the flags. This makes the flags clearer to use, as the enum tells
which values can be used with the flags field.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
2013-03-12 15:46:52 +02:00